Clears up static clang analysis warning regarding divide by zero.
Trying to explain to the compiler how it's impossible to avoid
incrementing num_blocks at least once is difficult.
Change-Id: Ibaae43be572e5cd7a689b440dcd341c17d33443b
Where clang static analysis or gcc -Wmaybe-uninitialized warns of
uninitialized values, assign 0 to ints, MB_MODE_COUNT to
MB_PREDICTION_MODE, and B_MODE_COUNT to B_PREDICTION_MODE.
Assert that the modes have been changed from the invalid value by
the end of the function.
Change-Id: Ib11e1ffb08f0a6fe4b6c6729dc93b83b1c4b6350
To avoid decode performance hit of 2% when running on hyperthreaded
cores.
This patch only uses the mutex's when we are running tsan.
This is safe because 32 bit operations like read and store are atomic
on all the platforms we care about. Tsan warns about race situations,
but in this case either situation ( read occurs before write or write
before read) the worst case is that we go around one extra time in the
loop. So the ordering doesn't really matter.
That said a few other things have been tried :
for instance as per here:
webrtc/base/atomicops.h#52
In this patch they use:
__atomic_load_n(i, __ATOMIC_ACQUIRE);
__atomic_store_n(i, value, __ATOMIC_RELEASE);
This code works on gcc, clang ( replacing protected write and read), and
avoids tsan errors. Incurring no penalty in performance. In C11 its
replaced by straight atomic operands.
However there is no equivalent in the visual studio's we support as
int32 on all windows platforms is already atomic. To avoid tsan like
warnings on windows we'd need to use interlocked exchange and the
end result doesn't gain us any thing.
Change-Id: I2066e3c7f42641ebb23d53feb1f16f23f85bcf59
Reapply this patch:
ff0107f Amend and improve VP8 multithreading implementation
Amended the patch to add a unit test, and fix an asan error.
BUG=webm:851
Change-Id: I6572c03256169c64e80248bf5a5e99f59a2fc93c
usage of the vp8 versions was removed in:
3f72509 vp8: remove VP8_SET_DBG* control support
vp9 had the usage stripped even earlier.
Change-Id: I978142eb6492552cd29c9c6feb1e89acfc5f7b84
This uses the same sdx4df pointers as vp8_diamond_search_sadx4 and
should therefore target the same optimizations.
See e4ddf9db6a
Change-Id: Ic298e9b25c34bbe6b7a0799509355b0addb56675
Control already exists for vp9, adding it to vp8.
Usage is only when error_resilient is off.
Added a datarate unittest for non-zero boost.
Change-Id: I4296055ebe2f4f048e8210f344531f6486ac9e35
In 1 pass CBR, with error_resilience off, allow for
special logic to change the default gf behaviour.
In this CL: boost is turned off and the gf period
is set to a multiple of cyclic refresh period.
Change only affect 1 pass CBR mode, i.e, when the flag
gf_update_onepass_cbr is set.
Including the previous change (3ec8e11: to allow cyclic refresh
for error_resilience off), comparing metrics on RTC set for
error_resilience off vs on: avgPSNR/SSIM up by ~6%.
Change-Id: Id5b3fb62a4f04de5a805bd1b418f2b349574e0bc
vp8_short_inv_walsh4x4_msa - Optimized to process in short vector type
Updated below functions to store exact number of bytes in output rather than complete vector
idct4x4_addblk_msa
idct4x4_addconst_msa
dequant_idct4x4_addblk_msa
dequant_idct4x4_addblk_2x_msa
dequant_idct_addconst_2x_msa
Change-Id: Ic1b3752e2421dc7d70a082dcdaab9d140d7e5d9c
cyclic_refresh was tied to error_resilience mode.
Allow it to be on also for 1 pass CBR mode even if
error_resilience is off.
Other option to use new control for this, but prefer to avoid
that for now.
Change-Id: I3625b292ee059a890e31338b514e211bf0ab5c3e
The original commit never set any 'specialize' line:
61311e6103
It appears the sadx4 version of function uses sdx4df calls to speed up
the search. There are no sse3 versions of the sdx4df functions, but
there are sse2 and msa versions.
There is a neon version of vpx_sad16x16x4d but not any of the smaller
versions. Perhaps if they existed this function could be expanded to use
them.
Change-Id: I936d7d6b1a3ff6dcd5a4d2322272708c47cdec13
Remove unused zbin variable:
warning: unused parameter ‘zbin’
Use int for loop variables to avoid unsigned conversion:
warning: comparison between signed and unsigned integer expressions
Change-Id: Icea74b870c0ee68a8bf687e796a69392af25a8ad
The value 35468 changes sign when stored in int16_t:
implicit conversion from 'int' to 'int16_t' (aka 'short')
changes value from 35468 to -30068
This negation requires adding back the original value to compensate.
Shifting the value keeps the value positive and saves a post-vqdmulh
shift.
This technique is used in webp and idct_dequant_full_2x_neon
BUG=b/28027557
Change-Id: I0c5ce09bea170fe08061856c2af6f841a557e0c3
This restores d9dce2f48e
Switched to using signed shift-and-narrow. Instead of saturating
negative results to 0, it was saturating them to 255.
BUG=webm:817
BUG=webm:1273
Change-Id: I571095336aa4182e3288b17924fcaaece42b0a49
When filtering it needs 6 pixels: 2 prior to the source, the source, and
3 after the source.
When filtering 16 wide, that means 21. To accomplish this the SSE2 reads
[-2] to [5], [6] to [13], and [14] to [21], a total of 24 bytes (reading
in groups of 8 is easy)
The filter then shifts this last set to the top half of the register and
uses 'or' to combine it with the previous set.
Valgrind detected an issue reading pixels [19], [20] and [21]:
Address 0x7f581c2 is 434 bytes inside a block of size 441 alloc'd
Note: we only need pixels [16], [17], and [18] as context for [15].
To fix this, it now reads 8 bytes starting at [11], which re-loads [11]
through [13], but stops at [18] and does not over-read any values.
This is shifted by 5 and 'or'd with xmm1. Although the lower bits are
not cleared, they overlap directly with [11] through [13], so 'or'
produces the correct results.
Change-Id: I0c89c03afa660fc9b0108ac055d7bd403e493320
the --enable-postproc-visualizer configure option remains as a no-op as
do the control names and values for compatibility
+ remove the corresponding debug flags from vpxdec: --pp-*
Change-Id: I4a001cd9962b59560d7d6bda6272d4ff32b8d37c
similar to changes that were done in vp9 for encoded frame size
reporting. has the side-effect of quieting a -Wshorten-64-to-32 warning.
Change-Id: I89f74cb617fc29334ee351dc8dfaa3b8cfd4e5af
The code only has issues when xoffset == 0 and yoffset == 0 which
represents a simple copy. Presumably this case does not need to be
handled because the issue has existed since 2010.
BUG=webm:1287
Change-Id: Ic47e2653f3b729e99b40e53d8d2d8d1501edaaa9
