Control already exists for vp9, adding it to vp8.
Usage is only when error_resilient is off.
Added a datarate unittest for non-zero boost.
Change-Id: I4296055ebe2f4f048e8210f344531f6486ac9e35
Fix unit_tests_ubsan failure for VP8/DatarateTestLarge.DenoiserOffOn.
Failure was triggered by commit: df66f8e8.
Change-Id: I7cc5bd309e85950cfc5755e01d0eb942d9ca6984
applied against a x86_64 configure with and without
--enable-vp9-highbitdepth
clang-tidy-3.7.1 \
-checks='-*,google-readability-braces-around-statements' \
-header-filter='.*' -fix
+ clang-format afterward
Change-Id: Ia2993ec64cf1eb3505d3bfb39068d9e44cfbce8d
Allow usage of lookahead for VBR in real-time mode, for 1 pass vbr.
Current usage is for fast checking of future scene cuts/changes,
and adjusting rate control (gf interval and active_worst/target size).
Added unittests (datarate) for 1 pass vbr mode, with non-zero lag.
Added an experimental option to limit QP based on lookahead.
Overall positive gain in metrics on ytlive set:
avgPNSR/SSIM up on average ~1-3%; several clips up by 5, 7%.
Change-Id: I960d57dfc89de121c4824b9a9bf88d2814e74b56
Don't advance the svc frame counters on dropped frame,
since this can break the referencing scheme and lead
to a crash/assert.
Updated svc-datarate unittest to add a lower bitrate test.
Change only affects 1 pass cbr svc, with frame dropper enabled.
Change-Id: Ibb7530b7a587a9344d46898d9286fd9e2ef0779c
Use the superframe counter to set the key frame, and force
it to the key frame on base spatial layer only.
Also, update svc frame counters under frame dropping.
Update unittest: add specific tests with short key frame period.
https://bugs.chromium.org/p/webm/issues/detail?id=1150
Change-Id: I5b1c9a09253e6e5fbfce51b4cf603ae22d422b01
For 1 pass cbr mode: allow for two-stage 1:2 scaling
(which will use the 1:2 optimized scaler) if the spatial
layer is 1/4x1/4 of souce.
Without this change, the base layer for 3 spatial layers would
be using the non-normative scaler which is un-optimized/C code.
Change-Id: I9d73f92a4a96927d0f1d6bf75315c1e60513226a
restore the value for VP9 to 9999 to satisfy the current test
expectations; without this
VP9/DatarateTestVP9Large.ChangingDropFrameThresh/8 will overshoot.
Change-Id: I88dad574ae4ab10f923579824c7347ff468c7045
Reset the scale factors before build_inter_predictors.
Add datarate tests for 3 spatial layers, which exposed this issue.
Change-Id: I7f81efbe44345ecea9fdd5f639a4cca76aed3874
the same as vp8, with the same reasoning from:
2a0d7b1 Reduce the default kf_max_dist to 128.
see also:
https://trac.ffmpeg.org/ticket/4904https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=815673
+ restore vpxenc behavior of taking the library default rather than
forcing 5s
This change also exposes an issue with one-pass svc in cbr mode, keep
the old default in datarate_test.cc for now.
Change-Id: Id6d1244f42490b06fefc1a7b4e12a423a1f83e88
Remove comment(s) and enable frame-dropper for tests.
Frame dropper for 1 pass svc was fixed a while ago:
https://chromium-review.googlesource.com/#/c/309230/
Change-Id: I5fd3192825b22e562db9210d3dc7b246a1799d8d
this removes the CONFIG_* checks from public headers, but means
'--enable-experimental --enable-spatial-svc' builds will fail without a
local change to the ABI in vpx_encoder.h. this should be all right for
testing this experiment.
Change-Id: Ief55e7b9d1e8332cfce990275e04c29b30af0c4a
Crash occured on very first key frame, because denoiser
temporal function was beng entered.
Updated denoiser unittest to set cpu_used from first frame,
and verified fix fixes the crash.
Change-Id: I3be1124b52846fbbe7248d2c3d6136e086c80bc1
Modified the thresholds of deciding whether or not to skip
the transforms in model_rd_for_sb_y(). Used zbin[] instead
of dequant[] to be more precise. Also, modified the checking
coditions.
Rtc set borg test results (at speed 6) showed:
average PSNR gain: 0.138%, overall PSNR gain: 0.158%,
and SSIM gain: 0.177%.
The data rate test was modified slightly as suggested by
Marco.
Change-Id: Ieaf633ab77f4838cb3c45cf69065b29d55f8ae6c
The denoiser sensitivity level should be set to 1 starting from
key frame. The internal function of denoiser should make the
temporal denoising operations cut off in key frame coding.
Change-Id: Id3e704a73e98e4ea801284a2cbbab2ea9c371d23
This commit makes the codec automatically turn on error resilient
mode when using real-time mode for temporal scalable coding. It
fixes an enc/dec mismatch issue and re-enables the corresponding
unit test.
Change-Id: Ie1f7134e9a78ddd43e9b1555b3ee991c8a3afd0d
A hidden enc/dec mismatch bug was accidentally triggered by
https://gerrit.chromium.org/gerrit/#/c/72247/
Adaptively adjust mode test kick-off thresholds in RTC coding
This commit temporarily turns off the broken unit tests to avoid
blocking other CLs while fixing.
Change-Id: I0a0f195030321190ce10879cd833187680576367
In many tests in VP8, the denoiser is disabled. By adding this
conditional comilation macro, the unit test will not be included
when denoiser is not enabled.
Change-Id: I6edec85c996acca22aacd11161c52408be2660a3
Before encoding a frame, calculate and store each 16x16 block's
variance of source difference between last and current frame.
Find partitioning threshold T for the frame from its variance
histogram, and then use T to make partition decisions.
Comparing with fixed 16x16 partitioning, rtc set test showed an
overall psnr gain of 3.242%, and ssim gain of 3.751%. The best
psnr gain is 8.653%.
The overall encoding speed didn't change much. It got faster for
some clips(for example, 12% speedup for vidyo1), and a little
slower for others.
Also, a minor modification was made in datarate unit test.
Change-Id: Ie290743aa3814e83607b93831b667a2a49d0932c
This commit adjusted the speed steps in rt mode to make the steps
more evenly spaced on speed and quality, specifically:
1. Merged 3 and 4 into one single step 3 and removed confilicting
features.
2. Move 8, 7, 6, 5 to be 7, 6, 5, 4 repsectively.
Change-Id: I38d56d61531f3561d772aef953c411c8fb38c063
One of the tests for real-time mode is failing at speed 6.
Introduced recently, will enable again when fixed.
Change-Id: I8f42de6a3eca226c9aa5c5e1fab98d629993c087
