All changes are for spatial svc only.
1. Enable encoding hidden frames in each layer and use alt reference idex to reference the hidden frame in each layer
2. Use golden reference idx for spatial reference
3. For those layers that don't have hidden frames (caused by lack of frame buffers), reference a hidden frame in lower layers
4. Add "auto-alt-refs" in svc options
Change-Id: Idf27d1fd2fb5f3ffd9e86d2119235e3dad36c178
Right now there is just one place to check: xd->lossless and for the first
pass there is a function is_lossless_requested().
Change-Id: I949a6834e64ce51e422e2892f097f2b871b5429a
This reverts commit 59e733ca81.
Hold off removing arnr_type to give users the opportunity
to change their script files to handle its deprecation. A
follow-up patch will mark the control for setting arnr_type
as deprecated and it will be removed completely in a later
revision of the code.
Change-Id: I8b817c744e144d3714234a4cd4309816d0c7e3e8
The encoder was not handling requests to place keyframes at
fixed intervals, i.e. kf_min_dist == kf_max_dist, correctly.
In this case when looking to place the next keyframe it was
accumulating stats all the way up to the end of the firstpass
file. This patch corrects this behavior.
Change-Id: I948ad9f1d7faa0c05861df588136cce3bb61d7e7
ARNR filtering is now forced to be centered on the ARF
frame and the other two options have been removed.
The other modes of constructing the ARNR frame were
not used and there does not seem to be any good
reason to maintain them.
This is purely an encoder-side change.
Change-Id: Ic772636d23f280752973852b9740083532a49de2
Adds test code to verify that supplemental superframe information
that precedes the normal superframe information will not break
decoding.
Change-Id: Ia252b887d7ee138f51dc9a778376ff739402c455
The end_useage parameter is confusingly named since it
now actually defines the rate control method used.
Change-Id: I98912caabfe556b7af0b939a645d1336409e4d71
Added command line flags "resize-width" & "resize-height"
to allow the user to specify the frame size to encode at.
These two flags are ignored if the "resize-allowed" switch
is not set to 1.
All frames in the clip are then encoded at this size, which
must be smaller than the raw frame size.
Change-Id: I3d64bd9303d5c0bd678461a866a1ea621700d744
Adds some high-level hooks for profile 2 before further
progress on the implementation.
According to the definitiion in this patch:
1. Profile 2 only supports 10 or 12 bit color but not 8
2. Profile 2 supports all color sampling modes: 444, 422 and 420,
and alpha plane.
3. Profile 3 is currently undefined.
Please consider the definition carefully and suggest modifications
to the definition as needed.
Change-Id: I5b284fc679e54ac5aee171af72fa7994cfd28995
Turns off the DISABLE_RC_LONG_TERM_MEM macro and makes other changes
in the way the bits are updated, to make 2-pass rate control track
target bitrates closer.
Change-Id: I5f3be4b11c2908e6a9a9a1dd4fcf4e65531c44d8
Root cause is the different default register length between x86
and x64 platform. Change spatial_layer_id to long long.
Change-Id: If1a5972365c7a59f7e76cb4fd714610f3d48a8ff
This commit changed how q is validated in lossless mode. With this
commit, when --lossless=1 is specificed at commandline, --min-q and
--max-q are now ignored. This is to make the option non-ambiguious.
Change-Id: I33e85690460537509d33be75d6a3597be4affc09
Silence signed/unsigned mismatch warnings by adding casts where
ts_number_layers does not match the sign of the variable to which
it is being compared.
Change-Id: Iab25e18c877d158b2b2b417de7da94669648b2fa
This patch adds a buffer-based rate control for temporal layers,
under CBR mode.
Added vpx_temporal_scalable_patters.c encoder for testing temporal
layers, for both vp9 and vp8 (replaces the old vp8_scalable_patterns).
Updated datarate unittest with tests for temporal layer rate-targeting.
Change-Id: I8900a854288b9354d9c697cfeb0243a9fd6790b1
This patch adds a buffer-based rate control for temporal layers,
under CBR mode.
Added vpx_temporal_scalable_patters.c encoder for testing temporal
layers, for both vp9 and vp8 (replaces the old vp8_scalable_patterns).
Updated datarate unittest with tests for temporal layer rate-targeting.
Change-Id: I9cb6cce2494390ae6096ee17774af7fb9308bde7
This patch only works if the video is a width and height that are both
a multiple of 32.. It sets every partition to 16x16, and does INTRADC
only on the first frame and ZEROMV on every other frame. It always does
does the largest possible transform, and loop filter level is set to 4.
Was ~20% faster than speed -5 of vp8
Now 20% slower but adds motion search ( every block ), nearest, near
and zeromv
The SVC test was changed because - while this realtime mode produces
bad quality albeit quickly, it isn't obeying all the rules it should
about which frames are available.
Change-Id: I235c0b22573957986d41497dfb84568ec1dec8c7
vpx_codec_vp9x_cx is not used internally. Experimental flag from
vp9_extracfg is also not really used. YUV 4:4:4 just works after these
changes (you have to specify --profile=1 for the encoder).
Change-Id: Ib1c8461d0d19d159827e005efe868f891eea0140
SVC multiple layer per frame encoding is invoked with vpx_svc_init and
vpx_svc_encode. These interfaces are designed to be invoked from ffmpeg.
Additional improvements:
- make dummy frame handling a bit more explicit
- fixed bug with single layer encodes
- track individual frame sizes and psnrs instead of averages
- parameterized quantizer, 16th scalefactors, more logging,
- enabled single layer encodes to generate baseline
- include new mode for 3 layer I frame with 5 total layers
Change-Id: I46cfa600d102e208c6af8acd6132e0cc25cda8d4
Warning was: "implicit conversion from enumeration type 'VPX_SCALING_MODE'
(aka 'enum vpx_scaling_mode_1d') to different enumeration type
'VPX_SCALING'".
Change-Id: I45689e439a8775bc1e7534d0ea1ff7c729f2c7f5
set_active_map()
set_roi_map()
The APIs need be implemented and tested later, to insure consistency
with VP9 codec internals
Change-Id: I198124ee318f0883b58d1d36cea3c7ccd742a57e
This reverts commit a82001b1cf, reversing
changes made to f6d870f7ae.
This commit breaks windows builds and needs some work to fix those and
some additional comments.
Change-Id: Ic0b0228e36704b127e5e399ce59db26182cfffe7
Adds modeled functions to decide the qp for altref frames in constant q
mode similar to other functions in use in bitrate mode.
Also turns on the constrained quality mode (end-usage=2) option which
was turned off before. Basic testing shows the mode works in principle,
to cap bitrate to the target-bitrate specified, while allowing lower
bitrate depending on the cq-level specified. The mode will need to be
improved over time.
Results for constant quality vs bitrate control mode:
derfraw300/fullderfraw: +3.0% at constant quality over bitrate control.
fullstdhdraw: +4.341%
stdhdraw250: +5.361%
Change-Id: If5027c9ec66c8e88d33e47062c6cb84a07b1cda9
