This patch fixes a bug that causes the loop filter search to reset to
a low value or zero after each arf overlay frame. We expect the overlay
frames to need little or no loop filtering but this should not propagate.
Change-Id: I895b28474cf200f20d82793f3de40b60b19579fd
More aggresive on avoiding denoising on skin.
May supplement this later by adding condtion onn consec_zeromv.
Change-Id: Ied92b332f9b24e821d2009f81d1565758588d9a5
Different quality levels are used for different regions in
the frame depending on how far they are vertically from the
center. Specifically, three segments are used based on the
mi_row index with respect number to the number of mi_rows in
the frame.
Change-Id: Ifc8b777bc58ea8521dffc4640360c67d99f8d381
Prior to this patch, read_inter_block_mode_info() would
find the nearmv and nearestmv for all modes. Now it does not
search for ZEROMV modes and breaks out early for NEARMV and
NEWMV modes.
Change-Id: Ifa7b1eaf58bb03b9c7792ea5012fef477527d0fd
This commit enables encoder to avoid 8x4 and 4x8 partitions for
scaled reference frames when libvpx is configured and built with
--enable-better-hw-compatibility
Change-Id: I02ad65c386f5855f4325d72570c49164ed52f413
Move the logic for forcing zero_mode after the
(ref_frame & flag_list) check.
This was causing an memory leak under msan:
https://bugs.chromium.org/p/webrtc/issues/detail?id=5402
Change-Id: Ie9d243369f8ed7c332f46178275945331da4fd85
Under --enable-better-hw-compabibility, this commit adds the asserts
that no mv clamping is applied for scaled references, so when built
with this configure option, decoder will assert if an input bitstream
triggger mv clamping for scaled reference frames.
Change-Id: I786e86a2bbbfb5bc2d2b706a31b0ffa8fe2eb0cb
This commit adds a new configure option:
--enable-better-hw-compatibility
The purpose of the configure option is to provide information on known
hardware decoder implementation bugs, so encoder implementers may
choose to implement their encoders in a way to avoid triggering these
decoder bugs.
The WebM team were made aware of that a number of hardware decoders
have trouble in handling the combination of scaled frame reference
frame and 8x4 or 4x8 partitions. This commit added asserts to vp9
decoder, so when built with above configure option, the decoder can
assert if an input bitstream triggers such decoder bug.
Change-Id: I386204cfa80ed16b50ebde57f886121ed76200bf
Add function to compute skin map for a given block, as its
used in several places (cyclic refresh, noise estimation, and denoising).
Change-Id: Ied622908df43b6927f7fafc6c019d1867f2a24eb
Set initial values for these parameters in the vp9_init_layer_context().
This also fixes an issue in the svc-bypass mode when frame flags are
passed via the vpx_codec_encode().
Change-Id: I0968f04672f8d3d2fe2cea6b8a23f79f80d7a8b1
For coding block sizes <=16X16, if the block is determined to be skin,
then always allow for that block to be candidate for refresh. So if that
block happens to be on the boost segment(s), segment won't get reset to 0
and delta-q will be applied.
PSNR/SSIM metrics neutral (little/no change) on RTC clips.
Speed increase small/negligible (< 1%).
Some visual improvement on faces in a few RTC clips.
Change-Id: I6bf0fce6f39d820b491ce05d7c017ad168fce7d6
H/V intra mode was only enabled for bsize < 16x16,
enable it also for bsize=16x16.
Metrics are neutral with this change:
Overall very small gain (0.1%), small visual gain on some RTC clips.
Change-Id: Ib2d7a44382433bfc11cf324aa3cc5c382ea9e088
For testing implemented a fixed pattern and delta, 1 pass,
fixed Q, low delay mode.
This has not in any way been tuned or optimized.
Change-Id: Idf5ee179b277fa15d07a97f14f2ce5bbaae80a04
The one pass VBR mode selects a Q range based on a
moving average of recent Q values. This calculation
should have been excluding arf overlay frames as these
are usually coded at the highest allowed value. Their
inclusion skews the average and can cause it to drift
upwards even when the clip as a whole is undershooting.
As such it can undermine correct adaptation of the allowed
Q range especially for easy content.
Change-Id: I7d10fe4227262376aa2dc2a7aec0f1fd82bf11f9
Keep track of frame indexes for the references, and
constrain inter mode search for reference with same
temporal alignment.
Improves speed by about ~15%, no noticeable loss in
compression performance.
Change-Id: I5c407a8acca921234060c4fcef4afd7d734201c8
Lower the threshold for splitting 32x32->16x16 based on average variance,
and add lower bound condition for this split to occur. This prevents
unneccassry splitting for areas with very low variance.
Change-Id: Ibeb33b3d993632c2019f296eb87ef3b7e3568189
For non-rd variannce partition, speed >= 5:
Adjustments to reduce dragging artifcat of background area near
slow moving boundary.
-Decrease base threshold under low source noise conditions.
-Add condition to split 64x64/32x32 based on average variances
of lower level blocks.
PSNR/SSIM metrics go down ~0.7/0.9% on average on RTC set.
Visually helps to reduce dragging artifact on some rtc clips.
Change-Id: If1f0a1aef1ddacd67464520ca070e167abf82fac
This commit makes the sub8x8 block rate-distortion optimization
scheme use precise motion compensated prediction to compute the rd
cost. It fixes a potential buffer overflow issue related to sub8x8
motion search on scaled reference frame.
Change-Id: I4274992ef4f54eaacfde60db045e269c13aaa2de
This commit enables the new temporal filter system for VP9. For
speed 1, it improves the compression performance:
derf 0.54%
stdhd 1.62%
Change-Id: I041760044def943e464345223790d4efad70b91e
This change has been imported from VP9 and
alters the nature and use of exhaustive motion search.
Firstly any exhaustive search is preceded by a normal step search.
The exhaustive search is only carried out if the distortion resulting
from the step search is above a threshold value.
Secondly the simple +/- 64 exhaustive search is replaced by a
multi stage mesh based search where each stage has a range
and step/interval size. Subsequent stages use the best position from
the previous stage as the center of the search but use a reduced range
and interval size.
For example:
stage 1: Range +/- 64 interval 4
stage 2: Range +/- 32 interval 2
stage 3: Range +/- 15 interval 1
This process, especially when it follows on from a normal step
search, has shown itself to be almost as effective as a full range
exhaustive search with step 1 but greatly lowers the computational
complexity such that it can be used in some cases for speeds 0-2.
This patch also removes a double exhaustive search for sub 8x8 blocks
which also contained a bug (the two searches used different distortion
metrics).
For best quality in my test animation sequence this patch has almost
no impact on quality but improves encode speed by more than 5X.
Restricted use in good quality speeds 0-2 yields significant quality gains
on the animation test of 0.2 - 0.5 db with only a small impact on encode
speed. On most natural video clips, however, where the step search
is performing well, the quality gain and speed impact are small.
Change-Id: Iac24152ae239f42a246f39ee5f00fe62d193cb98
