Plus a small code clean up. The experiment of EXT_REFS, compared against
the baseline, using Overall PSNR, now obtains a gain on lowres as:
Avg: -5.818; BDRate: -5.653
Compared against the previous EXT_REFS results on lowres, a tiny gain is
obtained as:
Avg: -0.047, BDRate: -0.063
(1) 780952 Add encoder first pass support to bi-prediction in EXT_REFS
(2) f91498 Add pred prob handling for new references in EXT_REFS
(3) e91472 Add decoder support for bi-direct prediction in EXT_REFS
(4) 0dbac9 Add encoder support to new references in EXT_REFS
(5) ad70cc Remove hard-coded number for EXT_REFS
(6) 9c1e2f Add the use of new reference frames at encoder in EXT_REFS
(7) 6d4fde Add the experiment flag of EXT_REFS
Change-Id: I26f7ca45b9ede7579fdb9d0d6a1a91f4334599bd
This commit changes to send frame size explicitly when
error_resilient_mode=1. Purpose is to allow parsing of bitstream
after a packet loss.
Change-Id: I7d1c010a465aa18914762cc1a3e61db377304c08
The (new) ans experiment replaces the bool coder with uABS bools. The
'rans' experiment adds multisymbol coding.
This matches the setup in aom/master.
Change-Id: Ida8372ccabf1e1e9afc45fe66362cda35a491222
* changes:
Fix warnings reported by -Wshadow: Part4: main directory
Fix warnings reported by -Wshadow: Part3: test/ directory
Fix warnings reported by -Wshadow: Part2b: more from av1 directory
Fix warnings reported by -Wshadow: Part2: av1 directory
Fix warnings reported by -Wshadow: Part1b: scan_order struct and variable
Fix warnings reported by -Wshadow: Part1: aom_dsp directory
Move STAT_TYPE enum to source file.
Code cleanup: mainly rd_pick_partition and methods called from there.
This patch adds bit account infrastructure to the bit reader API.
When configured with --enable-accounting, every bit reader API
function records the number of bits necessary to decoding a symbol.
Accounting symbol entries are collected in global accounting data
structure, that can be used to understand exactly where bits are
spent (http://aomanalyzer.org). The data structure is cleared and
reused each frame to reduce memory usage. When configured without
--enable-accounting, bit accounting does not incur any runtime
overhead.
All aom_read_xxx functions now have an additional string parameter
that specifies the symbol name. By default, the ACCT_STR macro is
used (which expands to __func__). For more precise accounting,
these should be replaced with more descriptive names.
Change-Id: Ia2e1343cb842c9391b12b77272587dfbe307a56d
While we are at it:
- Rename some variables to more meaningful names
- Reuse some common consts from a header instead of redefining them.
Cherry-picked from aomedia/master: 863b0499
Change-Id: Ida5de713156dc0126a27f90fdd36d29a398a3c88
- Change struct name to all caps SCAN_ORDER to be locally consistent.
- Rename struct pointers to 'scan_order' instead of hard to read short
names 'so' and 'sc'.
Cherry-picked from aomedia/master: 30abc082
Change-Id: Ib9f0eefe28fa97d23d642b77d7dc8e5f8613177d
Move computing the segmentation_probs.tree_cdf table per symbol to
computing it only when the probabilities are updated.
Change-Id: I3826418094bbaca4ded87de5ff04d4b27c85e35a
Move computing the partition_cdf tables per symbol to
computing them only when the probabilities are updated.
Change-Id: I442f9230ba00be7f5d0558d7c38d7324ad009ee8
Move computing the inter_ext_tx_cdf tables per symbol to
computing them only when the probabilities are updated.
Change-Id: I5e1e62f8eae8f6b2edbbd378beeb786649502c10
Move computing the intra_ext_tx_cdf tables per symbol to
computing them only when the probabilities are updated.
Change-Id: I26d5e419e103093e98a7d896c196176305b50fc9
Move from computing the switchable_interp_cdf per symbol to
computing once per frame when the probabilities are adapted.
Change-Id: I6571126239f0327e22bb09ee8bad94114291683e
This flag was already added to aomedia/master, so bringing it back to
webm/nextgenv2, as part of an effort to get the two codebases in sync.
Change-Id: I2b933a6a160e4210d1411a9e7978149eb8553205
This reverts commit 9b25f30674 to
reinstate the reverted commit with fixes that solved the build issues
when --enalbe-clpf is used in configure.
Change-Id: I15447cae7fa9b3deb27976345dc3db230a4a7a60
These signals were in the uncompressed frame header (as a temporary
hack), which caused two problems:
* We don't want that header to be duplicated in the slice header
* It was necessary to signal the number of bits to transmit up front
However, the filter size can be 128x128 which is greater than the SB
size, and a decoder wouldn't be able to know whether to read a bit or
not until the final SB of that 128x128 block has been decoded
(depending on whether the 128x128 is all skip or not). Therefore the
signalling was changed for 128x128 blocks so that every top left SB of
a 128x128 filter block contains a signal regardless of whether the
block is all skip or not. Also, all the MB's of 128x128 block are
filtered even if they are skip MB's. This gives the signal a purpose
even when the 128x128 block is all skip, and it also gives a slight
coding gain as it leaves a way to filter skip blocks, which was
previously forbidden.
Low latency:
PSNR YCbCr: -0.19% -0.14% -0.06%
PSNRHVS: -0.15%
SSIM: -0.13%
MSSSIM: -0.15%
CIEDE2000: -0.19%
High latency:
PSNR YCbCr: -0.03% -0.01% -0.09%
PSNRHVS: 0.04%
SSIM: 0.00%
MSSSIM: 0.02%
CIEDE2000: -0.02%
Change-Id: I69ba7144d07d388b4f0968f6a53558f480979171
To get ready for pulling AV1 to nextgenv2
Replace the experimental flag by MOTION_VAR. Rename major variables.
Change-Id: If6cf4f37b9319c46d8f90df551cc7295d66ca205
av1_clpf_frame() was always called with the same src and dst,
so we only need one argument and the code supporting different
src and dst was removed.
Change-Id: I70919f50e5cfb19c22eb4dff9ee7c0fa2697fad3
Instead of having CLPF write to an entire new frame and
copy the result back into the original frame, make the
filter able to work in-place by keeping a buffer of size
frame_width*filter_block_size and delay the write-back
by one filter_block_size row.
This reduces the cycles spent in the filter to ~75%.
Change-Id: I78ca74380c45492daa8935d08d766851edb5fbc1
This commit ports a CLPF change from aom/master by manually
cherry-picking:
7560123c066854aa40c4685625454aea03410b18
Change-Id: I61eb08862a101df74a6b65ece459833401e81117
Refactor to streamline the number of profiles needed, in
preparation for the next steps.
NO change in performance.
Change-Id: I753b89299897857f3c250c316b4cdc4fedcb90e8
Includes a major refactoring/enhancement to support
tile-adaptive switchable restoration. The framework can be
readily extended to add more restoration schemes in the
future. Also includes various cleanups and fixes.
Specifically the framework allows restoration to be conducted
on tiles such that each tile can be either left unrestored, or
use bilateral or wiener filtering.
There is a modest improvemnt in coding efficiency (0.1 - 0.2%).
Further enhancements will be added subsequently to improve coding
efficiency and complexity.
Change-Id: I5ebedb04785ce1ef6f324abe209e925c2d6cbe8a
this matches style guidelines and stabilizes successive runs of
clang-format across the tree. remaining types should be address in
successive commits.
Change-Id: I6ad3f69cf0a22cb9a9b895b272195f891f71170f
This allows for a clean subtraction of 1 along the transform
matrix diagonal and also makes the order of the parameter list
a little more intuitive.
Change-Id: I6a5d754af41b8d1292f241f9b21473160517d24f
Bitstream syntax:
For a rectangular inter block, 'rect_tx' flag is sent to indicate if
the biggest rect tx is used. If no, continue to decode regular
recursive tx partition.
Change-Id: I127e35cc619b65acb5e9a0717f399cdcdb73fbf0
