As an optimization some architectures use the max_sad argument to break
out early from the SAD. Pass in INT_MAX instead of 0 to prevent this.
Change-Id: I653c476834b97771578d63f231233d445388629d
In the variance calculations the difference is summed and later squared.
When the sum exceeds sqrt(2^31) the value is treated as a negative when
it is shifted which gives incorrect results.
To fix this we cast the result of the multiplication as unsigned.
The alternative fix is to shift sum down by 4 before multiplying.
However that will reduce precision.
For 16x16 blocks the maximum sum is 65280 and sqrt(2^31) is 46340 (and
change).
PPC change is untested.
Change-Id: I1bad27ea0720067def6d71a6da5f789508cec265
Allow the application to change the frame size during encoding. This
is only supported when not using lagged compress.
Change-Id: I89b585d703d5fd728a9e3dedf997f1b595d0db0f
MFQE postproc crashed with stream dimensions not a multiple of 16.
The buffer was memset unconditionally, so if the buffer allocation
fails we end up trying to write to NULL.
This patch traps an allocation failure with vpx_internal_error(),
and aligns the buffer dimensions to what vp8_yv12_alloc_frame_buffer()
expects.
Change-Id: I3915d597cd66886a24f4ef39752751ebe6425066
Sometimes, a user doesn't have enough bandwidth to send high-resolution
(i.e. HD) video even though the camera catches HD video. This change
allowed users to skip highest-resolution encoding by setting that level's
target bit rate to 0.
To test it, modify the following line in vp8_multi_resolution_encoder.c.
unsigned int target_bitrate[NUM_ENCODERS]={1400, 500, 100};
To skip the highest-resolution level, change it to
unsigned int target_bitrate[NUM_ENCODERS]={0, 500, 100};
To skip the first and second highest resolution levels, change it to
unsigned int target_bitrate[NUM_ENCODERS]={0, 0, 100};
This change also fixed a small problem in mapping, which slightly helped
quality and performance.
Change-Id: I977bae9a9fbfba85c8be4bd5af01539f2b84bc81
This is the final commit in the series converting to the new RTCD
system. It removes the encoder csystemdependent files and the remaining
global function pointers that didn't conform to the old RTCD system.
Change-Id: I9649706f1bb89f0cbf431ab0e3e7552d37be4d8e
This commit continues the process of converting to the new RTCD
system. It removes the last of the VP8_ENCODER_RTCD struct references.
Change-Id: I2a44f52d7cccf5177e1ca98a028ead570d045395
This is a proof of concept RTCD implementation to replace the current
system of nested includes, prototypes, INVOKE macros, etc. Currently
only the decoder specific functions are implemented in the new system.
Additional functions will be added in subsequent commits.
Overview:
RTCD "functions" are implemented as either a global function pointer
or a macro (when only one eligible specialization available).
Functions which have RTCD specializations are listed using a simple
DSL identifying the function's base name, its prototype, and the
architecture extensions that specializations are available for.
Advantages over the old system:
- No INVOKE macros. A call to an RTCD function looks like an ordinary
function call.
- No need to pass vtables around.
- If there is only one eligible function to call, the function is
called directly, rather than indirecting through a function pointer.
- Supports the notion of "required" extensions, so in combination with
the above, on x86_64 if the best function available is sse2 or lower
it will be called directly, since all x86_64 platforms implement
sse2.
- Elides all references to functions which will never be called, which
could reduce binary size. For example if sse2 is required and there
are both mmx and sse2 implementations of a certain function, the
code will have no link time references to the mmx code.
- Significantly easier to add a new function, just one file to edit.
Disadvantages:
- Requires global writable data (though this is not a new requirement)
- 1 new generated source file.
Change-Id: Iae6edab65315f79c168485c96872641c5aa09d55
Commit 892e23a5b introduced support for the VP8D_GET_LAST_REF_USED,
but missed the mapping of the control id to the underlying function,
so it was unavailable to applications.
In addition, the underlying function vp8_references_buffer() is
moved from common/postproc.c to decoder/onyxd_if.c as postproc.c is
not built in all configurations.
Change-Id: I426dd254e7e6c4c061b70d729b69a6c384ebbe44
Commit e06c242ba introduced a change to call vp8_find_near_mvs() only
once instead of once per reference frame by observing that the only
effect that the frame had was on the bias applied to the motion
vector. By keeping track of the sign_bias value, the mv to use could
be flip-flopped by multiplying its components by -1.
This behavior was subtley wrong in the case when clamping was applied
to the motion vectors found by vp8_find_near_mvs(). A motion vector
could be in-bounds with one sign bias, but out of bounds after
inverting the sign, or vice versa. The clamping must match that done
by the decoder.
This change modifies vp8_find_near_mvs() to remove the clamping from
that function. The vp8_pick_inter_mode() and vp8_rd_pick_inter_mode()
functions instead track the correctly clamped values for both bias
values, switching between them by simple assignment. The common
clamping and inversion code is in vp8_find_near_mvs_bias()
Change-Id: I17e1a348d1643497eca0be232e2fbe2acf8478e1
This commit is incomplete, as it does not synchronize the loop filter
before returning a handle to the reconstructed frame in
vpx_codec_get_preview_frame(), which can cause (false?) failures
when running the test_reconstruct_buffer test.
This may be related to a bug that does cause visible artifacts, which
is also under investigation.
This reverts commit 380d64ecb1.
Change-Id: Iad710941e7731d44fc2bde63bc63d6763cc4629e
A processor with ARMv7 instructions does not
necessarily have NEON dsp extensions. This CL
has the added side effect of allowing the ability
to enable/disable the dsp extensions cleanly.
Change-Id: Ie1e879b8fe131885bc3d4138a0acc9ffe73a36df
Makes the thresholds for the multiframe quality enhancement module
depend on the difference between the base quantizers. Also modifies
the mixing function to weigh the current low quality frame less if
the difference in quantizer is large. With the above modifications
mfqe works well for both scalable patterns as well as low quality
key frames.
Change-Id: If24e94f63f3c292f939eea94f627e7ebfb27cb75
filter in a way such that when there is a single bad frame, the
post-processing is applied not only to just that frame but a
few subsequent frames as well.
Change-Id: Iba5d9896eed77244eb76b4a74692a93f8ecff634
When running multi-layer (ML) encodes and dynamically
changing coding parameters on the fly (e.g. frame
duration/rate, bandwidths allocated to each layer)
the encoder would not produce sensible output.
In certain cases the rate targeting would be
hideously inaccurate.
These fixes make it possible to change these coding
parameters correctly and to maintain accurate control
of the rate targeting.
I also added the specification of the input timebase
into the test program, vp8_scalable_patterns.c.
Patch 2: Moved declaration to appease MS compiler)
Change-Id: Ic8bb5a16daa924bb64974e740696e040d07ae363
Add new get_predictor_pointers() and get_reference_search_order()
functions for code shared between the two implementations.
Change-Id: I1ebe76aa8f168b1f5cfabc00d05d8f19a0d4d207
with deblock or demacroblock filters. When --mfqe is used together
with --demacroblock or --deblock, mfqe is applied first and then
demacroblock/deblock is applied to the mfqe result.
Change-Id: Id83ee01f1b4a33a116f071dcf26d59c7f3497c32
precision used in initialization of roundoff is not a constant
updated to use #define MFQE_PRECISION 4
Change-Id: If2fc3d3d633d58a7f4ab34d258c232ec1e5f0a79
The default maximum keyframe interval is 9999, or over five minutes
at normal video rates. When the encoder produces streams with such
a long interval seeking (with correct output) is more expensive,
and live streaming is impossible.
Of course the encoding application should set this parameter
based on its knowledge of the intended use of the stream, but
reducing the default gives better results for applications
which do not.
Change-Id: I900b15d74ce72ecc3ade4d43f758c5cf97a2098a
This patch removes the local copies of the dequantize
constants and implements John's idea as described
in "Make a local copy of the dequantized data" commit.
Change-Id: Ic6b7d681f00bf63263f71ff1e39ab2f80729e8b2
Adds a multiframe postprocessing module to enhance the quality of
certain frames that are coded at lower quality than preceding frames.
The module can be invoked from the commandline by use of the --mfqe
option, and will be most beneficial for enhancing the quality of
frames decoded using scalable patterns.
Uses the vp8_variance_var16x16 and vp8_variance_sad16x16 function
pointers to compute SAD and Variance of blocks.
Change-Id: Id73d2a6e3572d07f9f8e36bbce00a4fc5ffd8961
Except zrun_zbin_boost, 15 AC values are the same for all other
parameters. Removed unneccessary calculation.
Change-Id: I6101c0fe8080bd2b4387c3b04d7ddedbf6010409
The code had a number of constructs like (condition)?1:0,
which is redundant with C's semantics. In the cases where a boolean
operator was used in the condition, simply remove the ternary part.
Otherwise adjust the surrounding expression to remove the condition
(eg, for rounding up. See pickinter.c and rdopt.c)
Change-Id: Icb2372defa3783cf31857d90b2630d06b2c7e1be
Multithreaded encoding was breaking at low bitrates
Please review/comment. Not sure if this is the best fix.
Change-Id: I87468c765372593fd865bc82e25121ebb8ca6af2
Make bilinearfilter_arm.c compiled only when HAVE_ARMV6, as its definitions
are v6 only. This is normally not a problem for static builds as the file
is elided at link time, but this was not being done properly for the
--enable-shared --enable-pic build.
Change-Id: Ic800a7cde751f74f22555c5b247f99f9df5e550d
Merged multi-resolution motion estimation with regular motion
estimation function in order to remove duplicated part. This
caused slight changes in multi-resulotion encoder quality &
performance.
Change-Id: Ib4ecc7acfebfe5eea959b5b91febae6db7b95fd1
The total_stats, this_frame_stats, and total_left_stats structures
were previously create by a heap allocation, despite being of fixed
size. These structures were allocated and deallocated during
{de,}allocate_compressor_data, which is reinvoked whenever the frame
size changes. Unfortunately, this clobbers the total_stats and
total_left_stats data.
Historically, these were variable size at one time, due to the first
pass motion map, which necessitated their being created by a unique
heap allocation. However, this bug with the total_stats being
clobbered has probably been present since that initial implementation.
These structures are instead moved to be stored within the struct
twopass_rc directly, rather than being heap allocated separately.
Change-Id: I7f9e519e25c58b92969071f0e99fa80307e0682b
When mb_skip_coeff is set, the idct is not necessary. Prior
to this patch, the code would call idcts based on leftover
eob information. This patch will now skip the idct for
SPLIT_MV and clear out the eobs for B_PRED, forcing the idct
to be skipped.
Change-Id: If5b0d2ed3ebd07789d30ec5160df927485fcaa17
