Built in echo in 'sh' on OS X does not support -n (exclude trailing
newline). It's not necessary so just leave it off. Fixes issue 390.
Build include guard using 'symbol' so that it is more likely to be
unique.
Change-Id: I4bc6aa1fc5e02228f71c200214b5ee4a16d56b83
This is a proof of concept RTCD implementation to replace the current
system of nested includes, prototypes, INVOKE macros, etc. Currently
only the decoder specific functions are implemented in the new system.
Additional functions will be added in subsequent commits.
Overview:
RTCD "functions" are implemented as either a global function pointer
or a macro (when only one eligible specialization available).
Functions which have RTCD specializations are listed using a simple
DSL identifying the function's base name, its prototype, and the
architecture extensions that specializations are available for.
Advantages over the old system:
- No INVOKE macros. A call to an RTCD function looks like an ordinary
function call.
- No need to pass vtables around.
- If there is only one eligible function to call, the function is
called directly, rather than indirecting through a function pointer.
- Supports the notion of "required" extensions, so in combination with
the above, on x86_64 if the best function available is sse2 or lower
it will be called directly, since all x86_64 platforms implement
sse2.
- Elides all references to functions which will never be called, which
could reduce binary size. For example if sse2 is required and there
are both mmx and sse2 implementations of a certain function, the
code will have no link time references to the mmx code.
- Significantly easier to add a new function, just one file to edit.
Disadvantages:
- Requires global writable data (though this is not a new requirement)
- 1 new generated source file.
Change-Id: Iae6edab65315f79c168485c96872641c5aa09d55
A processor with ARMv7 instructions does not
necessarily have NEON dsp extensions. This CL
has the added side effect of allowing the ability
to enable/disable the dsp extensions cleanly.
Change-Id: Ie1e879b8fe131885bc3d4138a0acc9ffe73a36df
Android.mk file for using the Android NDK build
system to compile. Adds option for SDK path to
use the compiler that comes with android for testing
compiler compliance.
Change-Id: I5fd17cb76e3ed631758d3f392e62ae1a050d0d10
Current android ndk compiler does not recognize
strings for attributes. Numerical equivalents
can be found in the "ARM IHI 0045C" document.
Change-Id: I72de85b8949dc0ae5212af604fff1d5a91a828ea
The conversion script was incorrectly matching
CONFIG_POSTPROC[_VISUALIZER] and generating an
incorrect vpx_config.asm
Match both PROC and ENDP on word boundaries
Change-Id: Ic2788c3b522d4ee0afc5223b72e1b09fb52645be
'all' is the conventional target for building everything in the
makefile, but the child make was expecting all-$(target), for debugging
reasons that I don't recall exactly. Restore the expected behavior.
Change-Id: Ifbb03610b55be679ce7c5e210b7a69a156bb76b9
This adds the magic .note.GNU-stack section at the end of each ARM
asm file (when built with gas), indicating that a non-executable
stack is allowed.
Without this section, the linker will assume the object requires an
executable stack by default, forcing an executable stack for the
entire program.
Change-Id: Ie86de6a449b52d392b9e5e0479833ed8c508ee65
Replace =1 with =true for yasm tool element. This aids in upgrading
e.g., vs9 project files to vs10.
build/x86-msvs/yasm.xml generated during conversion will require the
Separator attribute to be removed for the build to complete
successfully.
Change-Id: If75c4f9a925529740048882003e9d766c5ac4f0c
- Updated -linux-rvct targets to support RVDS 4.0 and later.
- Changed optimization flag to -Otime because -O3 ruined performance
for RVCT linux targets.
- Added support for --enable-small for RVCT
- RVCT created library should be able to link with GCC
- Supports building shared linux libraries
Change-Id: Ic62589950d86c3420fd4d908b8efb870806d1233
vp8_fast_quantize_b_neon function updated and further optimized.
- match current C implementation of fast quantizer
- updated to use asm_enc_offsets for structure members
- updated ads2gas scripts to handle alignment issues
Change-Id: I5cbad9c460ad8ddb35d2970a8684cc620711c56d
Always use CFLAGS/LDFLAGS that point to headers and libvpx.a inside our
build tree before ones from the environment, which could reference
headers or libs outside the build tree.
This fixes issue 307.
Change-Id: I34d176b8c21098f6da5ea71f0147d3c49283cc45
This patch changes the release configuration of MS VS projects to
explicitly use two compiler options "Maximize Speed (/O2)" and
"Favor fast code(/Ot)".
Change-Id: I0bf8343d9ca195851332b91ec69c69ee4e31ce2a
According to the docs, this should have been enabled, but
the disassembled output shows otherwise. This improved
the encode/decode performance.
Change-Id: I45ad7e6d299b89ac3166d7ef7da75b74994344c6
update for the latest version of the ios sdk. adding
usr/lib/system fixes a missing libcache.dylib issue
make isysroot path more DRY
Change-Id: Ib748ef3dac3cac2e4848fbffa1e9a0112eac826b
cygwin doesn't support _sopen. drop down to the lowest common
denominator and merge main for all platforms. this also opens the door
for supporting multiple object formats with a single binary.
Change-Id: I7cd45091639d447434e6d5db2e19cfc9988f8630
Detect the number of available cores and limit the thread allocation
accordingly. On decoder side limit the number of threads to the max
number of token partition.
Core detetction works on Windows and
Posix platforms, which define _SC_NPROCESSORS_ONLN or _SC_NPROC_ONLN.
Change-Id: I76cbe37c18d3b8035e508b7a1795577674efc078
remove helper function and avoid shadowing all the arguments to the
stack on 64bit systems
when running with --good --cpu-used=0:
~2% on linux x86 and x86_64
~2% on win32 x86 msys and visual studio
more on darwin10 x86_64
significantly more on
x86_64-win64-vs9
Change-Id: Ib7be12edf511fbf2922f191afd5b33b19a0c4ae6
obj_int_extract was unconditionally skipping the first character in the
symbol. make sure it's actually an '_' first
Change-Id: Icfe527eb8a0028faeabaa1dcedf8cd8f51c92754
Enable extraction of assembly offsets from compiled examples in MSVS.
This will allow us to remove some stub functions from x86 assembly since
we will be able to reliably determine structure offsets at compile time.
see ARM code for examples:
vp8/encoder/arm/armv5te/
vpx_scale/arm/neon/
Change-Id: I1852dc6b56ede0bf1dddb5552196222a7c6a902f
failed to find headers in the source directory
output to stdout instead of a hardcoded file
MinGW doesn't support _sopen_s
_fstat catches non-existant files
Change-Id: I24e0aacc6f6f26e6bcfc25f9ee7821aa3c8cc7e7
add visual studio 9 to --help
remove cpp, cxx, hpp, hxx files from filter
add the ability to target project names. this will be necessary to
enable obj_int_extract
Change-Id: I407583320d8b67a0df40c07221838c42678792f7
AMD64 only implies SSE2, not SSE3. There aren't any known cases where
icc was generating SSE3 instructions since all the vectorizable code
is already in handwritten asm, so this fix is included mostly for
correctness. Fixes issue #259.
Change-Id: I993335a4740b68b559035305fb52ca725a6beaff
common/arm/vpx_asm_offsets moves up a level. prepare for muxing with
encoder/arm/vpx_vp8_enc_asm_offsets
Change-Id: I89a04a5235447e66571995c9d9b4b6edcb038e24
Adds following targets to configure script to support RVCT compilation
without operating system support (for Profiler or bare metal images).
- armv5te-none-rvct
- armv6-none-rvct
- armv7-none-rvct
To strip OS specific parts from the code "os_support"-config was added
to script and CONFIG_OS_SUPPORT flag is used in the code to exclude OS
specific parts such as OS specific includes and function calls for
timers and threads etc. This was done to enable RVCT compilation for
profiling purposes or running the image on bare metal target with
Lauterbach.
Removed separate AREA directives for READONLY data in armv6 and neon
assembly files to fix the RVCT compilation. Otherwise
"ldr <reg>, =label" syntax would have been needed to prevent linker
errors. This syntax is not supported by older gnu assemblers.
Change-Id: I14f4c68529e8c27397502fbc3010a54e505ddb43
-For targets with external build systems like visual
studio CC is not set so check_add_cflags will fail.
Only call this function if extra_cflags is set.
Change-Id: I3531bad69e9b6a59c5be1b0e8b6053ccccbc332c
Add --extra-cflags as config parameter for user defined extra CFLAGS.
Add -g to asflags when debug enabled for arm targets.
Change-Id: Ibdde7cfdda6736c1c1db45e6466bd08504a51f15
Adds native build configuration for Snow Leopard. Useful when
users configure without arguments on OSX 10.6.
Change-Id: I0bd63912a25bbfb9d4c8d58a781d0f390792429c
Use mpsadbw, and calculate 8 sad at once. Function list:
vp8_sad16x16x8_sse4
vp8_sad16x8x8_sse4
vp8_sad8x16x8_sse4
vp8_sad8x8x8_sse4
vp8_sad4x4x8_sse4
(test clip: tulip)
For best quality mode, this gave encoder a 5% performance boost.
For good quality mode with speed=1, this gave encoder a 3%
performance boost.
Change-Id: I083b5a39d39144f88dcbccbef95da6498e490134
Solaris 10 requires -lposix4 to build successfully on gcc. I only have a
Sparc machine to test with on Solaris 10, but this change leaves
OpenSolaris x86 in a usable state w/ gnu-generic.
I am of the belief that this change should fix Solaris 10 on Sparc, but
will leave other Solaris architectures as is. If someone has an x86
Solaris 10 machine to test on, they may add x86-solaris-gcc to
libvpx/configure and give it a go.
Change-Id: I17a282028bb4d3e9fd8764159f95665160f7b62a
Fix out-of-tree builds using NASM. NASM expects its include paths to
have a trailing slash. These aren't used used when doing in-tree builds
(./configure)
Change-Id: I38d469d15acb1b7e65733a2e5ca8c9d86fa4ad86
yasm has to be preferred as currently nasm produces marginally less
efficient code (longer opcodes). Filed for nasm as:
https://sourceforge.net/tracker/?func=detail&atid=106208&aid=3037462&group_id=6208
OTOH package should be built always the same, no matter which additional
packages are / are not present on the system. As the package should be
built with nasm (as yasm may not be available) we should not use yasm
even if it is possibly available.
nasm >= approx. 2.09 is required for the nasm compilation as the former
versions had a section alignment bug.
Provide nasm compatibility. No binary change by this patch with yasm on
{x86_64,i686}-fedora13-linux-gnu. Few longer opcodes with nasm on
{x86_64,i686}-fedora13-linux-gnu have been checked as safe.
Change-Id: Icb0fe39c64bbcc3bcd7972e392fd03f3273340df
Changes 'The VP8 project' to 'The WebM project', for consistency
with other webmproject.org repositories.
Fixes issue #97.
Change-Id: I37c13ed5fbdb9d334ceef71c6350e9febed9bbba
--cpu was already implemented for most of our embedded
platforms, this just extends it to x86. Corner case for
Atom processor as it doesn't respond to the --march=
option under icc.
Change-Id: I2d57a7a6e9d0b55c0059e9bc46cfc9bf9468c185
Fixes http://code.google.com/p/webm/issues/detail?id=96
The regex which postprocesses the gcc make-deps (-M) output was too
greedy and matching in the dependencies part of the rule rather than
the target only. The patch provided with the issue was not correct, as
it tried to match the .o at the end of the line, which isn't correct
at least for my GCC version. This patch matches word characters
instead of .*
Thanks to raimue and the MacPorts community for isolating this issue.
Change-Id: I28510da2252e03db910c017101d9db12e5945a27
When running configure automatically through the make dist target,
reuse the arguments passed to the original configure command.
Change-Id: I40e5b8384d6485a565b91e6d2356d5bc9c4c5928
The libs.mk file must be installed for the vpx.vcproj file to be
generated. It was being installed, but not in the src/ directory as
expected.
Also missed include files yasm.rules, quantize_x86.h
Change-Id: Ic1a6f836e953bfc954d6e42a18c102a0114821eb
Add targets x86-win32-vs9 and x86_64-win64-vs9 for support of Visual
Studio 2008-- this removes the need to convert the vs8 projects before
using them within the IDE.
Change-Id: Idb83e2ae701e07d98db1be71638280a493d770a2
The generated project is vpx.vcproj, change vpx_decoder references to
match. Remove .rules file dependency as it will be pulled from the
source tree.
Change-Id: I679db2748b37adae3bafd764dba8575fc3abde72
These are mostly vestigial, it's up to the compiler to decide what
should be inlined, and this collided with certain Windows platform SDKs.
Change-Id: I80dd35de25eda7773156e355b5aef8f7e44e179b
When the license headers were updated, they accidentally contained
trailing whitespace, so unfortunately we have to touch all the files
again.
Change-Id: I236c05fade06589e417179c0444cb39b09e4200d
vs8
- pull yasm.rules [1] into the source tree to avoid need to install
file into VC/VCProjectDefaults
- reference same w/ToolFile & RelativePath
- update arm branch to match
vs7:
- quote source file paths passed to yasm
[1]:
http://www.tortall.net/svn/yasm/trunk/yasm/Mkfiles/vc9/yasm.rules@2271
Change-Id: I52b801496340cd7b1d0023d12afbc04624ecefc3
Using uname fails e.g. on a 64-bit machine with a 32-bit toolchain.
The following gcc -dumpmachine strings have been verified:
* 32-bit Linux gives i486-linux-gnu
* 64-bit Linux gives x86_64-linux-gnu
* Mac OS X 10.5 gives i686-apple-darwin9
* MinGW gives mingw32
*darwin8* and *bsd* can safely be assumed to be correct, but *cygwin*
is a guess.
Change-Id: I6bef2ab5e97cbd3410aa66b0c4f84d2231884b05
This patch adds support for building shared libraries when configured
with the --enable-shared switch.
Building DLLs would require more invasive changes to the sample
utilities than I want to make in this patch, since on Windows you can't
use the address of an imported symbol in a static initializer. The best
way to work around this is proably to build the codec interface mapping
table with an init() function, but dll support is of questionable value
anyway, since most windows users will probably use a media framework
lib like webmdshow, which links this library in staticly.
Change-Id: Iafb48900549b0c6b67f4a05d3b790b2643d026f4
The libvpx build system was influenced by the clever design of the
FFmpeg configure script. Say so in the script header, and provide a
little introduction.
Change-Id: I4d134c77f9032d1dde72b852b444e98676b85326
Support --prefix, --libdir as a conventional way of specifying the default
installation directories. libdir is required to be a subdirectory of prefix
at this time.
Change-Id: If45d9e3129efcde83c05b7766accc9017988e715
Try to select an optimized target based on the host's uname, as this
is the expected behavior of most configure scripts.
Change-Id: I1408ece70c43487902ea6edc6450d6a55abc424a
This renames the vpx_codec/ directory to vpx/, to allow applications
to more consistently reference these includes with the vpx/ prefix.
This allows the includes to be installed in /usr/local/include/vpx
rather than polluting the system includes directory with an
excessive number of includes.
Change-Id: I7b0652a20543d93f38f421c60b0bbccde4d61b4f
Split the 'make install' target into two: install and dist. dist
retains the old make install behavior of building a "distribution"
release, with source files, build system, etc. install does what
one one expects -- installs into a tree in the filesystem, /usr/local
by default.
Change-Id: I0805681ac10f853ef94cdc3aa70981c6bea81b45
Allows the default generic-gnu target, which is selected if no
target is specified, to be build in PIC mode. The generic-gnu target
was not being selected as a gcc target, because it doesn't end in
gcc.
Change-Id: I28a2a420109c34fd87a20911f6455c8d8d5ded75
This doesn't play well with autotools, and the preprocessor magic is
confusing and unhelpful in the vp8-only context.
Change-Id: I2fcb57e6eb7876ecb58509da608dc21f26077ff1
1 liner bug fix for issue #10. Surrounding quotation marks were
missing from a variable, causing a warning message inside a test
clause.
Change-Id: Ia21421f77c309bbd87332547374241269bbe5326
