Make all post-processor code conditionally
compilable based on the CONFIG_VP9_POSTPROC
macro.
Also, remove the vizualization code from VP9
since it is out of date and will not compile.
Change-Id: I1e9e13a09ecd43e9a3f3704c175ae8cd258ababd
vp9_block_error_sse2 can only handle 16 bytes at a time but
the function requires to handle a sequence of 32 bytes at a time
so each 16 bytes is handled in a different register.
With AVX2 optimization the 32 bytes can be handled in one register instead
of two in the SSE2
The vp9_block_error was optimized by 85%.
The user level was optimized by 1.2%
Change-Id: Ia8fffe60e61eff7432a5fbd538757894f6c319fd
As a side-effect, the max_sad check is removed from the
C-implementation of VP8, for consistency with VP9, and to
ensure that the SAD tests common to VP8/VP9 pass.
That will make the VP8 C implementation of sad a little slower
but given that is rarely used in practice, the impact will be
minimal.
Change-Id: I7f43089fdea047fbf1862e40c21e4715c30f07ca
The warning messages complained that there are unused arguments
in a few prediction modes. This structure was designed on purpose,
such that a wrapper function can cover all prediction mode cases
and make them readily accessible as an pointer array.
This commit silences such warnings.
Change-Id: I7036b6bdb70747e5327d8f6fceb154f100abc4c0
Inline loopfilter has been already handled in vp9_decode_frame().
Collecting all similar code in one place now.
Change-Id: I358a0280fc7c2b27cca520bc1e8c16c4eb6491dd
* changes:
Turn on unit tests for SSSE3 8x8 forward and inverse 2D-DCT
Change eob threshold for partial inverse 8x8 2D-DCT to 12
SSSE3 8x8 inverse 2D-DCT with first 10 coeffs non-zero
The scanning order has the first 12 coefficients of the 8x8 2D-DCT
sitting in the top left 4x4 block. Hence the partial inverse 8x8
2D-DCT allows to handle cases with eob below 12.
The overall runtime of the inverse 8x8 2D-DCT unit is reduced from
166 cycles (using SSE2) to 150 cycles (using SSSE3).
Change-Id: I4514f9748042809ac84df4c14382c00f313f1cd2
This commit enables ssse3 assembly implementation of the 8x8
inverse 2D-DCT with only first 10 coefficients non-zero. The
average runtime for this unit goes down from 198 cycles to 129
cycles (34.8% faster).
Change-Id: Ie7fa4386f6d3a2fe0d47a2eb26fc2a6bbc592ac7
Includes changes that are not compatible with VS windows builds.
Amongst other things stdint.h is not supported in VS.
This reverts commit 89fbf3de50.
Change-Id: Ifa86d7df250578d1ada9b539c9ff12ed0c523cdd
This commit enables SSSE3 version full inverse 8x8 2D-DCT and
reconstruction. It makes the runtime of vp9_idct8x8_64_add down
from 256 cycles (SSE2) to 246 cycles.
Change-Id: I0600feac894d6a443a3c9d18daf34156d4e225c3
Assembly implementation of ssse3 8x8 forward 2D-DCT. The current
version is turned on only for x86_64. The average unit runtime
goes from 157 cycles down to 136 cycles, i.e., about 12.8% faster.
This translates into about 1.5% speed-up for pedestrian_area 1080p
at speed 2.
Change-Id: I0f12435857e9425ed7ce12541344dfa16837f4f4
This patch fixed the uninitialized read errors in Issue 748:
"dr memory VP9 encode errors". In vp9_convolve_avg_sse2,
when width is 4, pavgb reads 8 bytes from dst buffer that is
out of range. An error is reported although the data is not
actually used later. This issue was resolved by preventing
uninitialized reads.
Change-Id: I109a54910aa47139cb13119de86f2062cff207df
The macosx release of clang v5.0 identifies itself as:
Apple LLVM version 5.0 (clang-500.2.79) (based on LLVM 3.3svn)
This version of clang uses the older _mm_broadcastsi128_si256, like
v3.3, as given away in the LLVM svn version above.
Change-Id: I4d6d59d5454efd57d2ae9e75f5eb7486af7cbd0c
Calculate the difference variance between last source frame and
current source frame. The variance is calculated at 16x16 block
level. The variances are compared to several thresholds to decide
final partition sizes.
An adaptive strategy is implemented to decide using
SOURCE_VAR_BASED_PARTITION or FIXED_PARTITION based on motions
in the video. The switching test is done once every
search_type_check_frequency frames.
The selection of source_var_thresh needs to be investigated
further later.
RTC set Borg test showed 0.424% overall psnr gain, and 0.357%
ssim gain. For clips with large enough static area, the
encoding speedup is around 2% to 15%.
Change-Id: Id7d268f1d8cbca7fb8026aa4a53b3c77459dc156
Adds some high-level hooks for profile 2 before further
progress on the implementation.
According to the definitiion in this patch:
1. Profile 2 only supports 10 or 12 bit color but not 8
2. Profile 2 supports all color sampling modes: 444, 422 and 420,
and alpha plane.
3. Profile 3 is currently undefined.
Please consider the definition carefully and suggest modifications
to the definition as needed.
Change-Id: I5b284fc679e54ac5aee171af72fa7994cfd28995
For very large size video image, the scaling calculation may need use
value beyond the range of int. This commit upgrade the value to 64bit
to make sure the calculation do not wrap around INT_MAX.
The change corrected the decoder behavior.
The bug affects only very large resolution video because the scaling
calculation was sufficient for image size smaller than 2^13.
This resolves issue:
https://code.google.com/p/webm/issues/detail?id=750
Change-Id: I2d2ed303ca6482f31f819f3c07d6d3e98ef3adc5
2 functions were optimized for avx2 by using full 256 bit register
In order to handle 32 elements in parallel instead of only 16 in parallel:
1. vp9_sad32x32x4d
2. vp9_sad64x64x4d
The function level gain is 66% and the user level gain is ~1%.
Change-Id: I4efbb3bc7d8bc03b64b6c98f5cd5c4a9dd3212cb
Fixed dr memory errors reported in Issue 736:
https://code.google.com/p/webm/issues/detail?id=736
All elements in left_col buffer need to be initialized to ensure
the correctness of SIMD operations in x86 optimized code.
Change-Id: I8e7f26ab45cca8099c1f9342bcf852f828bda7e4
clang reports gcc-4.2.1 in e.g., 3.3, 3.4; add a specific clang version
check for _mm256_broadcastsi128_si256
fixes issue #720
Change-Id: I5c8e3c27fdea05d8a5b050e8cb74894b595f4709
significantly speeds up file generation.
the goal of this change is to convert rtcd.sh to perl as directly as
possible to allow for simple comparison. future changes can make it more
perl-like.
---
Linux
[CREATE] vpx_scale_rtcd.h
real 0m0.485s -> 0m0.022s
[CREATE] vp8_rtcd.h
real 0m4.619s -> 0m0.060s
[CREATE] vp9_rtcd.h
real 0m10.102s -> 0m0.087s
Windows
[CREATE] vpx_scale_rtcd.h
real 0m8.360s -> 0m0.080s
[CREATE] vp8_rtcd.h
real 1m8.083s -> 0m0.160s
[CREATE] vp9_rtcd.h
real 2m6.489s -> 0m0.233s
Change-Id: Idfb71188206c91237d6a3c3a81dfe00d103f11ee
The function has evolved over time, now only calls vp9_rtcd(), so this
commit removes the function and changes to call vp9_rtcd() directly.
Change-Id: I8cfa6190daa4b28f6f3d1e11bb3a07f9c95322bf
Optimizing 2 functions to process 32 elements in parallel instead of 16:
1. vp9_sub_pixel_avg_variance64x64
2. vp9_sub_pixel_avg_variance32x32
both of those function were calling vp9_sub_pixel_avg_variance16xh_ssse3
instead of calling that function, it calls vp9_sub_pixel_avg_variance32xh_avx2
that is written in avx2 and process 32 elements in parallel.
This Optimization gave 80% function level gain and 2% user level gain
Change-Id: Iea694654e1b7612dc6ed11e2626208c2179502c8
different_ref_found is always equal to one (if calculated) because
ref_frame[0] != ref_frame[1] for each mi-block.
Change-Id: Ibd7625b7b29dec2fd3c40edbc3de1169abb78585
for ABSDATA mode, so segment loop filter level always fall in valid
range for both Absolute and delta modes.
Change-Id: If90df3411479533dbdab63f8ae088d2f5dd174a9
The qindex for a segment was not clamped in ABSDATA mode, which may
cause invalid memory access if an ill-formed stream has a negative
value in ABSDATA mode. This commit added clamp to make sure qindex
for a segment always fall into valid range.
Change-Id: I0a74d00f4ef40aec7edaeca1d03c8645e23ab08c
Optimizing 2 functions to process 32 elements in parallel instead of 16:
1. vp9_sub_pixel_variance64x64
2. vp9_sub_pixel_variance32x32
both of those function were calling vp9_sub_pixel_variance16xh_ssse3
instead of calling that function, it calls vp9_sub_pixel_variance32xh_avx2
that is written in avx2 and process 32 elements in parallel.
This Optimization gave 70% function level gain and 2% user level gain
Change-Id: I4f5cb386b346ff6c878a094e1c3b37e418e50bde
Optimizing all SSSE3 assembly for convolution:
1. vp9_filter_block1d4_h8_sse2
2. vp9_filter_block1d8_h8_sse2
3. vp9_filter_block1d16_h8_sse2
4. vp9_filter_block1d4_v8_sse2
5. vp9_filter_block1d8_v8_sse2
6. vp9_filter_block1d16_v8_sse2
my optimization include:
-processing 2x8 elements in one 128 bit register instead of processing
8 elements in one 128 bit register.
-removing unecessary loads.
This optimization gives between 2.4% user level gain for 480p input
and 1.6% user level gain for 720p.
This Optimization is done only for 64 bit
Change-Id: Ic07fce2f9360329b4f2d956efda1480ae958766b
Added support for external frame buffers to libvpx's VP9 decoder.
If the external frame buffer functions are set then libvpx will
call the get function whenever it needs a new frame buffer to
decode a frame into. And it will call the release function
whenever there are no more references to that buffer.
Change-Id: Id2934d005f606af6e052fb6db0d5b7c02f567522
Prior to this commit, both encoder and decoder reset mode/mv info from
previous frame in error resilient mode to ensure bitstreams are able to
decode when there is loss of frame in decoder side. However, this is
not necessary. This commit changed to remove the reset, so encoder can
continue to use mode/mv/partition information from previously encoded
frame without affecting decodeablilty under loss of frame.
Change-Id: I0279f862900dc647fb471ae3389770bb1b9f454f
Two convolve functions were optimized for AVX2:
1. vp9_filter_block1d16_h8
2. vp9_filter_block1d16_v8
vp9_filter_block1d16_v8 was optimized for AVX2 by reducing the number of
loop strides by half, two strides were processed in parallel.
vp9_filter_block1d16_v8 was also optimized in the same way also some of the
loads were being done outside of the loop and by that preventing redundant
loads.
This Optimization gives 43% function level gain and 1.3% user level gain.
Now can be compiled in Windows
Change-Id: I2714124cfb0c14a77d7a0ce126a20db92ffbf92c
This CL changes libvpx to call a function when a frame buffer
is needed for decode. Libvpx will call a release callback when
no other frames reference the frame buffer. This CL adds a
default implementation of the frame buffer callbacks. Currently
only VP9 is supported. A future CL will add support for
applications to supply their own frame buffer callbacks.
Change-Id: I1405a320118f1cdd95f80c670d52b085a62cb10d
This patch adds a buffer-based rate control for temporal layers,
under CBR mode.
Added vpx_temporal_scalable_patters.c encoder for testing temporal
layers, for both vp9 and vp8 (replaces the old vp8_scalable_patterns).
Updated datarate unittest with tests for temporal layer rate-targeting.
Change-Id: I8900a854288b9354d9c697cfeb0243a9fd6790b1
This isn't strictly necessary, but makes the file more consistent
with the other arm assembly source files.
Change-Id: I245c9677d89e0ab3f31991e473764858af35b180
avoid wrapping msvc includes with extern "C"; this breaks some visual
studio builds of the (c++) tests.
Change-Id: Ie8062d55d4f4c049f6cd360a36da6a67607df132
This patch added ssse3 optimization of bilinear sub-pixel filters.
The real time encoder was speeded up by ~1%.
Change-Id: Ie82e98976f411183cb8c61ab8d2ba0276e55a338
The new implementation disagrees when the argument is equal to 2**n but
that is never called in practice and based on how it is used the new
implementation is correct in that case.
Change-Id: Ifbac4ad87d459fe6bd2fd0f400c0340f96617342
Using bilinear filters could speed up the codec in real-time mode.
This patch added sse2 optimizations of bilinear filters that
operate on different-sized blocks.
Tests showed that the real-time encoder was speeded up by 3%.
Change-Id: If99a7ee4385fcc225c3ee7445d962d5752e57c3f
This patch adds a buffer-based rate control for temporal layers,
under CBR mode.
Added vpx_temporal_scalable_patters.c encoder for testing temporal
layers, for both vp9 and vp8 (replaces the old vp8_scalable_patterns).
Updated datarate unittest with tests for temporal layer rate-targeting.
Change-Id: I9cb6cce2494390ae6096ee17774af7fb9308bde7
As pointed out by Dmitry and James, "partial" is a Microsoft-
specific c++ keyword, and it is renamed.
Change-Id: Ia0fc11ceb89e54b3195287f89f7e26edbbe9beb8
Implemented parallel loopfiltering, which uses existing tile-
decoding threads. Each thread works on one row, and when that row
is loopfiltered, it moves to next unattended row. To ensure the
correct filtering order, threads are synchronized and one
superblock is filtered only if the superblocks it depends on are
filtered already.
To reduce synchronization overhead and speed up the decoder, we use
nsync > 1 for high resolution.
Performance tests:
1. on desktop:
8-tile 4k video using 8 threads, speedup: 70% - 80%
4-tile HD video using 4 threads, speedup: ~35%
2. on mobile device(Nexus 7):
4-tile 1080p video using 4 threads, speedup: 18% - 25%
4-tile 1080p video using 2 threads, speedup: 10% - 15%
Change-Id: If54b4a11960dd706c22d5ad145ad94156031f36a
This patch only works if the video is a width and height that are both
a multiple of 32.. It sets every partition to 16x16, and does INTRADC
only on the first frame and ZEROMV on every other frame. It always does
does the largest possible transform, and loop filter level is set to 4.
Was ~20% faster than speed -5 of vp8
Now 20% slower but adds motion search ( every block ), nearest, near
and zeromv
The SVC test was changed because - while this realtime mode produces
bad quality albeit quickly, it isn't obeying all the rules it should
about which frames are available.
Change-Id: I235c0b22573957986d41497dfb84568ec1dec8c7
Encoder's boarder is still 160, while decoder's boarder will be 32.
With on demand and separate boarder buffer for boarder extension.
The decoder's boarder does not need to to 160 anymore.
Change-Id: I93d5aaff15a33a2213e9761eaa37c5f2870747db
This commit deprecates the use of best_mv from encoding and bit-stream
writing stages. It hence removes the definition from MACROBLOCKD.
Change-Id: I8e5302775a2aa4a18900726df407bff881f2dfb1
This commit further optimizes SSE2 operations in the second 1-D
inverse 16x16 DCT, with (<10) non-zero coefficients. The average
runtime of this module goes down from 779 cycles -> 725 cycles.
Change-Id: Iac31b123640d9b1e8f906e770702936b71f0ba7f
Optimizing all SSSE3 assembly for convolution:
1. vp9_filter_block1d4_h8_sse2
2. vp9_filter_block1d8_h8_sse2
3. vp9_filter_block1d16_h8_sse2
4. vp9_filter_block1d4_v8_sse2
5. vp9_filter_block1d8_v8_sse2
6. vp9_filter_block1d16_v8_sse2
my optimization include:
-processing 2x8 elements in one 128 bit register instead of processing
8 elements in one 128 bit register.
-removing unecessary loads.
This optimization gives between 2.4% user level gain for 480p input
and 1.6% user level gain for 720p.
This Optimization done only for 64bit.
Change-Id: Icb586dc0c938b56699864fcee6c52fd43b36b969
