This commit considers the case where a single reference motion
vector pair is found in the candidate list. It treats this pair
as the effective motion vector for nearestmv mode. This improves
the coding performance by 0.06% for stdhd sets.
Change-Id: I9ce12f456b52912933e05c18c3841a78c26155d2
This commit allows the codec to add motion vector pairs into
the candidate list. It further improves the compression performance
by 0.1% across derf, hevcmr, stdhd, and hevchr sets without adding
encode/decode time.
Change-Id: I88d36da25a2a89bb506d411844af667081eba98b
The nominal tx_type for a given mode is used as a context
to encode the actual tx_type for intra.
Results:
derflr: -0.241% BDRATE
hevcmr: -0.366% BDRATE
Change-Id: Icfe7b0a58d79bc6497a06e3441779afec6e01e21
It allows the codec to account for certain corner cases when
processing inter prediction mode entropy coding.
Change-Id: Ied451f4fff26ba579f6556554b8381ff2ccd0003
Various additional changes were made to make the experiment
compatible with misc_fixes.
derflr: +0.979%
hevcmr: +0.865%
Speed-wise with --enable-supertx the encoder is only about 10%
slower than without. Decoding impact is about 30% slowdown.
Note this does not work with ext-tx or var-tx yet. That is
a TODO.
Change-Id: If25af4241a7a9efbd28f58eda3c4f044c7a7ef4b
For the experiment of EXT_REFS, removed the previous special handling
on the new last 3 references, i.e. LAST2_FRAME, LAST3_FRAME, and
LAST4_FRAME, at the decoder, so that these new last references are
treated the same way as the other 3 references (LAST_FRAME,
GOLDEN_FRAME, and ALTREF_FRAME). Encoder changes have been made
accordingly to realize this flexibility.
Change-Id: Ic6546f9443b4377bb7e7b101bfa3e70a8b8d1c65
The culprit is on the decode side xd->lossless[i] setup was in wrong
location where segment features are not yet decoded.
Also on the encoder side, transform mode was not set consistently
between when tx_mode is selected and how tx_mode is enforced in
tx size selection.
Change-Id: I4c4c32188fda7530cadab9b46d4201f33f7ceca3
This commit allows the codec to analyze the reference motion vector
candidate list and adaptively reduce the size of inter prediction
mode set.
Change-Id: Ied6a403843b860d66f26ed485c1825c05c71bdfc
This commit re-works the entropy coding scheme of the motion
compensated prediction modes. It allows more flexible hyperplane
partition for precise classification.
Change-Id: Iba5035c76691946cf1386b6c495e399c3d9c8fc5
This change has been imported from VP9 and
alters the nature and use of exhaustive motion search.
Firstly any exhaustive search is preceded by a normal step search.
The exhaustive search is only carried out if the distortion resulting
from the step search is above a threshold value.
Secondly the simple +/- 64 exhaustive search is replaced by a
multi stage mesh based search where each stage has a range
and step/interval size. Subsequent stages use the best position from
the previous stage as the center of the search but use a reduced range
and interval size.
For example:
stage 1: Range +/- 64 interval 4
stage 2: Range +/- 32 interval 2
stage 3: Range +/- 15 interval 1
This process, especially when it follows on from a normal step
search, has shown itself to be almost as effective as a full range
exhaustive search with step 1 but greatly lowers the computational
complexity such that it can be used in some cases for speeds 0-2.
This patch also removes a double exhaustive search for sub 8x8 blocks
which also contained a bug (the two searches used different distortion
metrics).
For best quality in my test animation sequence this patch has almost
no impact on quality but improves encode speed by more than 5X.
Restricted use in good quality speeds 0-2 yields significant quality gains
on the animation test of 0.2 - 0.5 db with only a small impact on encode
speed. On most natural video clips, however, where the step search
is performing well, the quality gain and speed impact are small.
Change-Id: Iac24152ae239f42a246f39ee5f00fe62d193cb98
1) Add facade to quantize b/fp/dc version so that their interface
are the same.
2) Merge vp10_xform_quant b/fp/dc version to one function so that
the code flow in encodemb.c is clear
Change-Id: Ib62d6215438fc2d07f4e7e72393f964832d6746f
Estimate angle histogram using gradient analysis, then skip those
angles that are unlikely to be chosen.
On ext-intra experiment, turning off filter-intra modes:
for all-key-frame setting, computation overhead is reduced
by about 40%, coding gain dropped from +2.08% to +1.96% (derflr);
with kf-max-dist=150, computation overhead is reduced
by about 60%, coding gain dropped from +0.58% to +0.49% (derflr).
Change-Id: I36687410fb10561b8e1a8eebb1528cf17755bd5b
This commit ports the motion vector stack from motion field
analyzer to the encoding and decoding pipeline.
Change-Id: Ie283c1e1a15b4c17a1c7c175ce322bf053bb7840
Under the experiment of EXT_REFS: LAST2_FRAME, LAST3_FRAME, and
LAST4_FRAME.
Coding efficiency: derflr +1.601%; hevchr +1.895%
Speed: Encoder slowed down by ~75%
Change-Id: Ifeee5f049c2c1f7cb29bc897622ef88897082ecf
Remove MISC_FIXES flags except for the changes on MV precision, which
has a 0.1% performance drop.
On derflr, the impact is -0.012%.
Change-Id: I0a74e5a212dd0cb827192a318c92a714c9681e45
Reset the effective range of inter_tx_size, instead of the entire
array in the rate-distortion optimization loop.
Change-Id: Id453fbd6dddfe69f4e451ba8518c083326d5dd53
This commit fixes an encoding failure case triggered when early
termination feature is turned on for transform block size search.
It resolves the corresponding enc/dec mismatch issue.
Change-Id: I2c5b7d8b1efe25fe3810e6ed307f4b1865dede49
Adds a new interpolation experiment.
Improves entropy coding to send the filter type only if
the motion vectors have subpel components.
Adds one new 8-tap smooth filter, and tweaks the others.
derflr: +0.695%
hevcmr: +0.305%
About 5% encode slowdown. No visible impact for decoding.
Also makes the interpolation framework flexible to support both
strictly interpolating filters as well as non-interpolating
filters that filter integer offsets. This is mainly for
further experimentation and if not found useful the code will
be removed.
Change-Id: I8db9cde56ca916be771fe54a130d608bf10786e6
This commit refactors the rate-distortion optimization scheme for
transform block coding. When both ext-tx and var-tx experiments
are turned on, the encoding time for bus_cif at 1000 kbps goes down
from 706377 ms to 666503 ms (5.6% speed-up). The coding statics
remain unchanged.
Change-Id: I20835db573725580aad79c16220f799ce01f2093
Currently there are two parts in this experiment: extra directional intra
prediction modes and the filter intra modes migrated from the nextgen branch.
Several macros are defined in "blockd.h" to provide controls of the experiment
settings. Setting "DR_ONLY" as 1 (default is 0) means we only use directional
modes, and skip the filter-intra modes; "EXT_INTRA_ANGLES" (default is 128)
defines the number of different angles we want to support; setting
"ANGLE_FAST_SEARCH" as 1 (default is 1) means we use fast sub-optimal search
for the best prediction angle, instead of exhaustive search. The fast search
is about 6 times faster than the exhaustive search, while preserving about
60% of the coding gains.
With extra directional prediction modes (fast search), we observe the following
code gains (number in parentheses is for all-key-frame setting):
derflr +0.42% (+1.79%)
hevclr +0.78% (+2.19%)
hevcmr +1.20% (+3.49%)
stdhd +0.56%
Speed-wise, about 110% slower for key frames, and 30% slower overall.
The gains of filter intra modes mostly add up with the gains of directional
modes. The overall coding gain of this experiment:
derflr +0.94%
hevclr +1.46%
hevcmr +1.94%
stdhd +1.58%
Change-Id: Ida9ad00cdb33aff422d06eb42b4f4e5f25df8a2a
