An intended behavior change disabling exhaustive searches in speed
feature causes VP9/DatarateTestVP9LargeDenoiser.4threads test failure.
Change the threshold to make it pass.
BUG=webm:1429
Change-Id: Ibcbe2314c6b2525799894f5d7204fc8eb4ec2a1e
Add support for everything except block sizes of 4.
Performance is better but numbers will improve again when the variance
optimizations land.
BUG=webm:1423
Change-Id: I92eb4312b20be423fa2fe6fdb18167a604ff4d80
Some of the mixed sizes were missing. They can be implemented trivially
using the existing helper function.
When comparing the previous 16x8 and 8x16 implementations, the helper
function is about 10% faster than the 16x8 version. The 8x16 is very
close, but the existing version appears to be faster.
BUG=webm:1422
Change-Id: Ib0e856083c1893e1bd399373c5fbcd6271a7f004
Approximates division using multiply and shift.
Speeds up both sizes (8x8 and 16x16) by 30 times.
Fix the call sites to use the RTCD function.
Delete sse2 and mips implementation. They were based on a previous
implementation of the filter. It was changed in Dec 2015:
ece4fd5d22
BUG=webm:1378
Change-Id: I0818e767a802966520b5c6e7999584ad13159276
This patch followed allow_exhaustive_searches feature modification and
continued to modify the encoder to achieve the determinism in the row
based multi-threaded encoding. While row-mt = 1 and using multiple
threads, the adaptive feature in encoder was disabled, which gave
BDRate gain(at speed 1, -0.6% ~ -0.7%; at speed 2, -0.46% ~ -0.59%),
but some encoder speed losses(7% ~ 10% at speed 1 and 3% ~ 6% at
speed 2). These speed losses were acceptable considering the speed
gains obtained from row-mt.
Change-Id: I60d87a25346ebc487a864b57d559f560b7e398bb
Re-enable the SVC tests, wrap the non-zero expectation
in GetMismatchFrames around #if CONFIG_VP9_DECODER.
Change-Id: I0e8a2d78b868c32f18fe597540f397d3a1b303b5
Slightly faster, the other dc predictors cannot be faster since
the computation speedup is overwhelmed by the time spent reading
dst to write just the 8x8 part.
Change-Id: I94a0b50500adf8b7b6bb919dbf5c7adf5b9fba66
Replace by CAST_TO_BYTEPTR/SHORTPTR.
The rule is: if a short ptr is casted to a byte ptr, any offset
operation on the byte ptr must be doubled. We do this by casting to
short ptr first, adding offset, then casting back to byte ptr.
BUG=webm:1388
Change-Id: I9e18a73ba45ddae58fc9dae470c0ff34951fe248
Disable the 1 pass CBR SVC tests with temporal_layers > 1.
Issue with the commit 863f860, which will cause encoder/decoder
mismatch due to skipping encoder loopfilter for non-reference frames.
Will re-enable the tests when fixed.
Change-Id: I74918a0045a17976b069c4be63fbeb921974df0d
Modify the frame flags to update the ARF on top layer,
for the tests:
VP9/DatarateTestVP9Large.BasicRateTargeting3TemporalLayers
VP9/DatarateTestVP9Large.BasicRateTargeting3TemporalLayersFrameDropping
This is needed to fix the encode/decoder mismatches caused by 863f860,
and removed in the revert e9b7f98.
Change-Id: I6b9fecfdd17315fc0179e29949338c77636026c0
Buffers on 32 bit x86 builds only guaranteed 8 byte alignment. Fixed
with "AvgPred test: use aligned buffers" and "sad avg: align
intermediate buffer"
Also re-enable asserts on the C version.
BUG=webm:1390
Change-Id: I93081f1b0002a352bb0a3371ac35452417fa8514
This reverts commit 863f860bfc.
This causes encoder / decoder mismatches in various
VP9/DatarateTestVP9Large.BasicRateTargeting3TemporalLayers tests
BUG=webm:1408
Change-Id: Ic200c39d7ed9c0b0247ef562f5d6f7b2625f7e14
Useful for SVC, where the top layer enhancement frames may
not update any reference buffers, as is the case for the
patterns in the 1 pass CBR SVC when #temporal_layers > 1.
~3% encoder speedup for SVC patterns with temporal layers
in 1 pass CBR mode.
Updated the SVC datarate tests for the mismatch frames.
Set the frame-dropper off in some tests with #temporal_layers > 1
so we can correctly set #mismatch frames. Adjusted rate target
threshold for tests where frame-dropper was turned off.
Change-Id: Ia0c142f02100be0fed61cd2049691be9c59d6793
Provides over 15x speedup for width > 8.
Due to smaller loads and shifting for width == 8 it gets about 8x
speedup.
For width == 4 it's only about 4x speedup because there is a lot of
shuffling and shifting to get the data properly situated.
BUG=webm:1390
Change-Id: Ice0b3dbbf007be3d9509786a61e7f35e94bdffa8
To prevent the motion vector out of range bug, added a motion vector unit
test in VP9. In the 4k video encoding, always forced to use extreme motion
vectors and also encouraged to use INTER modes. In the decoding, checked if
the motion vector was valid, and also checked the encoder/decoder mismatch.
The tests showed that this unit test could reveal the issue we saw before.
Change-Id: I0a880bd847dad8a13f7fd2012faf6868b02fa3b4
Make the source_sad feature work properly for cases of VBR or
screen_content with SVC.
Added unittest for SVC with screen-content on.
Change-Id: Iba5254fd8833fb11da521e00cc1317ec81d3f89b
Change tests to reflect use. Input sizes will be 8 or 16 (but not
necessarily square).
filter_weight is capped at 2 and filter_strength at 6
Speed test, disabled by default.
Change-Id: Idfde9d6c4b7d93aaf0e641b0f4862c15e2a2af7a
Enable row-mt for SVC for real-time mode, speed >=5.
Add the controls to the sample encoders, but keep it off for now.
Add the control and enable it for the 1 pass CBR unittests.
For speed 7, 3 layer SVC, 2 threads, row-mt enabled gives about ~5% speedup.
Change-Id: Ie8e77323c17263e3e7a7b9858aec12a3a93ec0c1
When eob is less than or equal to 135 for high-bitdepth 32x32 idct,
call this function.
BUG=webm:1301
Change-Id: I8a5864f5c076e449c984e602946547a7b09c9fe6
This may fix the time out failure of valgrind tests in nightly
since more coverages were added on row-mt.
Change-Id: Id9414e66d1a266602c7495243d9f5cb69e17ccdc
Moves the def from vpx_encoder.h -> vpx_codec.h. The defined value
is changed as part of this move.
Adds the value to decoder capabilities when CONFIG_VP9_HIGHBITDEPTH.
Change-Id: I7d61fc821cda29f1e32bb9b2b9ffd3d83966e419
new_mt is a very generic name that will get obsolete soon enough.
Since this is exposed as a codec control, renaming it to row_mt to
signify row level paralellism. Also renaming the ETHREAD_BIT_MATCH
codec control to ROW_MT_BIT_EXACT.
Change-Id: Ic7872d78bb3b12fb4cf92ba028ec8e08eb3a9558
Re-organized the encoder threading tests and grouped tests into
4 parts. Added PSNR checking test to make sure the PSNR variation
is within a small range.
BUG=webm:1376
Change-Id: I09edb990236a87a4d2b2b0e1ceaf6c6435a35eff
vp9_highbd_block_error_8bit_c was a very simple wrapper around
vp9_block_error_c. The SSE2 implemention was practically identical to
the non-HBD one. It was missing some minor improvements which only
went into the original version.
In quick speed tests, the AVX implementation showed minimal
improvement over SSE2 when it does not detect overflow. However, when
overflow is detected the function is run a second time. The
OperationCheck test seems to trigger this case and reverses any
speed benefits by running ~60% slower. AVX2 on the other hand is
always 30-40% faster.
Change-Id: I9fcb9afbcb560f234c7ae1b13ddb69eca3988ba1
The output needs to be aligned. Input is read with 'movq' not 'movqda'
so it is not expected to be aligned.
Change-Id: Ibd48a84c1785917a6a97c3689a05322abba486b4
Modified the code to facilitate bit-match tests in first pass
Added unit-tests to test the row based multi-threading behavior for bit-exactness
Change-Id: Ieaf6a8f935bb1075597e0a3b52d9989c8546d7df
When eob is less than or equal to 38 for high-bitdepth 16x16 idct,
call this function.
BUG=webm:1301
Change-Id: I09167f89d29c401f9c36710b0fd2d02644052060
While the new-mt mode is enabled(namely, allowing to use row-based
multi-threading in encoder), several speed features that adaptively
adjust encoding parameters during encoding would cause mismatch
between single-thread encoded bitstream and multi-thread encoded
bitstream. This patch provides a set_control API to disable these
features, so that the bit match bitstream is obtained in the unit
test.
Change-Id: Ie9868bafdfe196296d1dd29e0dca517f6a9a4d60
The RunQuantCheck() test on it exposes 16-bit overflow in stage 7 of
pass 2. Change to use saturating add/sub for both
vpx_idct16x16_38_add_neon() and vpx_idct16x16_256_add_neon() for high
bitdepth.
Change-Id: Ibf4c107a887553a52852cc582e28d38a5a5a2712
Fixed the following issue.
..\test\vp9_ethread_test.cc(69): warning C4805: '|=' : unsafe mix of type 'bool' and type 'int' in operation [C:\src\buildbot\test-libvpx\tests\dveCPjwhBE\.build-x86_64-win64-vs10\test_libvpx.vcxproj]
..\test\vp9_ethread_test.cc(69): warning C4800: 'int' : forcing value to bool 'true' or 'false' (performance warning) [C:\src\buildbot\test-libvpx\tests\dveCPjwhBE\.build-x86_64-win64-vs10\test_libvpx.vcxproj]
Change-Id: I37f897cf12a0b7500d2fcbac9e4615f08a83fdb4
