Allows building the library with the gcc -pedantic option, for improved
portabilty. In particular, this commit removes usage of C99/C++ style
single-line comments and dynamic struct initializers. This is a
continuation of the work done in commit 97b766a46, which removed most
of these warnings for decode only builds.
Change-Id: Id453d9c1d9f44cc0381b10c3869fabb0184d5966
aligned buffers improve performace. this change brings vpxenc &
vp8_scalable_patterns in line with the other examples.
Change-Id: I4cf9f3e4728b901161905dd7ccb092e774ffb15f
Rather than using the static default maximum keyframe spacing
provided by vpx_codec_enc_config_default() set the default
value to 5 times the frame rate. Five seconds is too long for
live streaming applications, but is a compromise between seek
efficiency and giving the encoder freedom to choose keyframe
locations.
The five second value is from James Zern's suggestion in
http://article.gmane.org/gmane.comp.multimedia.webm.user/2945
Change-Id: Ib7274dc248589c433c06e68ca07232e97f7ce17f
Propagate debug setting to the EBML struct. When writing the application
name, this allows us to strip the version code and keep the output
metadata static.
Change-Id: I8e06c6abd743bedbff5af6242bbdae5d55754538
When we do 2-pass encoding, elapsed time is accumulated through
whole 2-pass process, which gives incorrect time and fps results
for second pass. This change fixed that by resetting the time
accumulator for second pass.
Change-Id: Ie6cbf0d0e66e6874e7071305e253c6267529cf20
Produce the token partitions on-the-fly, while processing each MB.
Context is updated at the beginning of each frame based on the
previoud frame's counters. Optimally encoder outputs partitions in
separate buffers. For frame based output, partitions are concatenated
internally.
Limitations:
- enabled just in combination with realtime-only mode
- number of encoding threads has to be equal or less than the
number of token partitions. For this reason, by default the encoder
will do 8 token partitions.
- vpxenc supports partition output (-P) just in combination with
IVF output format (--ivf)
Performance:
- Realtime encoder can be up to 13% faster (ARM) depending on the number
of threads and bitrate settings. Constant gain over the 5-16 speed
range.
- Token buffer reduced from one frame to 8 MBs
Quality:
- quality is affected by the delayed context updates. This again
dependents on input material, speed and bitrate settings. For VC
style input the loss seen is up to 0.2dB. If error-resilient=2
mode is used than the effect of this change is negligible.
Example:
./configure --enable-realtime-only --enable-onthefly-bitpacking
./vpxenc --rt --end-usage=1 --fps=30000/1000 -w 640 -h 480
--target-bitrate=1000 --token-parts=3 --static-thresh=2000
--ivf -P -t 4 -o strm.ivf tanya_640x480.yuv
Change-Id: I127295cb85b835fc287e1c0201a67e378d025d76
Add the ability to specify multiple output streams on the command line.
Streams are delimited by --, and most parameters inherit from previous
streams.
In this implementation, resizing streams is still not supported. It
does not make use of the new multistream support in the encoder either.
Two pass support runs all streams independently, though it's
theoretically possible that we could combine firstpass runs in the
future. The logic required for this is too tricky to do as part of this
initial implementation. This is mostly an effort to get the parameter
passing and independent streams working from the application's
perspective, and a later commit will add the rescaling and
multiresolution support.
Change-Id: Ibf18c2355f54189fc91952c734c899e5c072b3e0
dynamicly assign ARG_CTRL_CNT_MAX and
add check to make sure argument instance
doesnt already exist before creating a duplicate
Change-Id: I4f78a9c5346cda8e812cd89c077afe8996493508
To avoid a dependency on vpx_version.h, call the vpx_codec_version_str()
function and build up the string manually.
Change-Id: Ie650e9b8f2aaaffaa31da5e9ef3b566b972321b4
Since this is the only ABI incompatible change since the last release,
convert it to use the control interface instead. The member of the
configuration struct is replaced with the VP8E_SET_MAX_INTRA_BITRATE_PCT
control.
More significant API changes were expected to be forthcoming when this
control was first introduced, and while they continue to be expected,
it's not worth breaking compatibility for only this change.
Change-Id: I799d8dbe24c8bc9c241e0b7743b2b64f81327d59
Using small values for --buf-sz= in command line causes
floating point exception due to division by zero.
Change-Id: Ibfe2d44db922993a78ebc9a4a1087d9625de48ae
As reported in issue 331, vpxenc encoded incorrect webm file header
on big endian machines. This change fixed that.
Change-Id: I31924ebd476a87f3e88b9b5424540bf781d2b86f
For clips that are near 60fps and have a lot of alt refs, it's possible
that the ring buffer holding the previous frames sizes/pts could wrap
around, leading to a division by zero.
In addition to checking for this condition in the ring buffer loop,
the buffer size is made dependent on the actual frame rate in use,
rather than defaulting to 60, which should improve accuracy at frame
rates >= ~60.
Change-Id: If5a04d6e847316dc5f7504f25c01164cf9332be8
Add the --rate-hist=n option, which displays a histogram with n
buckets for the rate over the --buf-sz window.
Change-Id: I2807b5a1525c7972e9ba40839b37e92b23ceffaf
Add the --q-hist=n option, which displays a histogram with n buckets for
the quantizer selected on each frame.
Change-Id: I59b020c26b0acae0b938685081d9932bd98df5c9
Create a new input parameter to allow specifying
the packed frame stereo 3d format. A default value
of mono will be written in the absence of user
specified input
Change-Id: I576d9952ab5d7e2076fbf1b282016a9a1baaa103
Identified as a possible cause of issue #308, the code was silently
ignoring realloc failures, which would lead to corruption, memory
leaks, and likely a crash. The best we can do in this case is die
gracefully.
Change-Id: Ie5f6a853d367015be5b9712bd742778f3baeefd9
Map an enum to the --end-usage values, so you can specify
--end-usage=cq instead of --end-usage=2. The numerical values still
work for historical scripts, etc, but this is more user friendly.
Change-Id: I445ecd9638f801f5924a71eabf449bee293cdd34
Cast size_t to (unsigned long) and print it with the %lu format
string, which is more portable than C99's explict %zu for size_t.
This truncates on Windows x64 but otherwise works on 32 and 64 bit
platforms. In practice the stats file is unlikely to be so large.
Change-Id: I0432b3acf85fc6ba4ad50640942e1ca4614b21cb
Adds following targets to configure script to support RVCT compilation
without operating system support (for Profiler or bare metal images).
- armv5te-none-rvct
- armv6-none-rvct
- armv7-none-rvct
To strip OS specific parts from the code "os_support"-config was added
to script and CONFIG_OS_SUPPORT flag is used in the code to exclude OS
specific parts such as OS specific includes and function calls for
timers and threads etc. This was done to enable RVCT compilation for
profiling purposes or running the image on bare metal target with
Lauterbach.
Removed separate AREA directives for READONLY data in armv6 and neon
assembly files to fix the RVCT compilation. Otherwise
"ldr <reg>, =label" syntax would have been needed to prevent linker
errors. This syntax is not supported by older gnu assemblers.
Change-Id: I14f4c68529e8c27397502fbc3010a54e505ddb43
The merge includes hooks to for CQ mode and other code
changes merged from the test branch.
CQ mode attempts to maintain a more stable quantizer within a clip
whilst also trying to adhere to a guidline maximum bitrate.
The existing target data rate parameter is used to specify the
guideline maximum bitrate.
A new parameter allows the user to specify a target CQ level.
For normal (non kf/gf/arf) frames, the quantizer will not drop BELOW the
user specified value (0-63). However, in some cases the encoder may
choose to impose a target CQ that is above that specified by the user,
if it estimates that consistent use of the target value is not compatible
with guideline maximum bitrate.
Change-Id: I2221f9eecae8cc3c431d36caf83503941b25e4c1
stats_close() was not freeing memory for
single pass runs. It now takes in arg_passes
to determine when it should free memory.
Change-Id: I6623b7e30b76f9bf2e16008490f9b20484d03f31
Add a new encoder control, VP8E_SET_TUNING, to allow the application
to inform the encoder that the material will benefit from certain
tuning. Expose this control as the --tune option to vpxenc. The args
helper is expanded to support enumerated arguments by name or value.
Two tunings are provided by this patch, PSNR (default) and SSIM.
Activity masking is made dependent on setting --tune=ssim, as the
current implementation hurts speed (10%) and PSNR (2.7% avg,
10% peak) too much for it to be a default yet.
Change-Id: I110d969381c4805347ff5a0ffaf1a14ca1965257
