Currently this only supports thumb2.
This involves rewriting certain instructions that can't be expressed
in thumb2 into equivalent instruction sequences. The regexps for
rewriting are currently written pretty narrowly, only covering the
exact cases currently encountered in the code base.
No IT instructions are added (since that would require more logic than
plain regexps), so using the thumb mode requires enabling
-mimplicit-it=always/thumb.
Change-Id: I1f676ad1d351381f02bcf00105102aa8dd7ae364
When using 'always_inline' 'inline' should be specified as well.
Thanks to Digit for identifying this:
https://chromiumcodereview.appspot.com/14820003/
Change-Id: If1647fac91b85ecabe6d3cd04290d5c08c5a11ea
The support for detecting hardfp toolchains in af9dd50e is a
step in the right direction, but that particular switch case
isn't executed at all if the toolchain variable is set.
This fixes cross building from x86 ubuntu to armhf ubuntu,
in configurations such as
"CROSS=arm-linux-gnueabihf- ./configure --target=armv7-linux-gcc".
Change-Id: I6f141361e40374fbab564f9196d90e598fe9a0f6
Conflicts:
vp9/common/vp9_findnearmv.c
vp9/common/vp9_rtcd_defs.sh
vp9/decoder/vp9_decodframe.c
vp9/decoder/x86/vp9_dequantize_sse2.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_common.mk
Resolve file name changes in favor of master. Resolve rdopt changes in
favor of experimental, preserving the newer experiments.
Change-Id: If51ed8f457470281c7b20a5c1a2f4ce2cf76c20f
Add the config directory to the rtcd generation script. libvpx is
configured in the jni directory but ndk-build is intended to be run from
the next directory up. Currently it needs to be run from the jni
directory but this is being looked in to.
Add a trailing slash to allow the variable to be empty.
Reduce offset generation to the files which are actually used.
Change-Id: Ia84fac37e8998ba647423d0ee45fc66a891ce10c
Pick up VP8 encryption, quantization changes, and some fixes to vpxenc
Conflicts:
test/decode_test_driver.cc
test/decode_test_driver.h
test/encode_test_driver.cc
vp8/vp8cx.mk
vpxdec.c
vpxenc.c
Change-Id: I9fbcc64808ead47e22f1f22501965cc7f0c4791c
sse4_1 code used uint16_t for returning sad, but that
won't work for 32x32 or 64x64. This code fixes the
assembly for those and also reenables sse4_1 on linux
Change-Id: I5ce7288d581db870a148e5f7c5092826f59edd81
Move SSE4 detection below compiler configuration. Otherwise ${CC} may
not be populated.
We are specifically interested in -msse4.1. Narrow detection code.
Change-Id: I0ffac49e91b3fdb2aceb6eb6b90dc1c10b159111
Remove an extra level of escaping around the $@ variable to get valid output.
Prior to this change, modifying header files did not trigger a rebuild of
sources dependent on them.
Change-Id: I93ecc60371b705b64dc8a2583a5d31126fe3f851
ndk-build is intended to be launched from the application directory,
not the jni directory. Clarify the path in the comments.
Change-Id: Ie0faa89a13d967088a4fd2fd1c647962a9c04217
First attempt at avoiding all the compile-time environment detection for
cases where you can generate the environments statically, as when the
real build is being performed by another build system.
Change-Id: Ie3cf95d71d6c5169900f31e263b84bc123cdf73f
This is enabled by default in the main configure.sh, but apparently
is supposed to be disabled if the hardware doesn't support it.
Unaligned reads is only supported on armv6 and newer.
Change-Id: Ie1412e36a14036bbb4fe7b89aa36a178f35b2228
Update the fmt_deps function to use a new sed expression to convert the
object file name generated by the compiler into the path-transformed
name of the .o and .d files.
Prior to this patch, changing a header file would not trigger an
incremental build.
Change-Id: I07f498a1d134577b89a72e3f1143c737b31a0636
this commit changed the asm file compiling in MSVC to use individually
customized build command line with object filename specified for each
input file. This allows object filenames prefixed with path name, and
avoid name collision in link time
Change-Id: I996098643dcadc393af57035a04bef3877f45424
Rather than building an object file directory heirarchy matching the
source tree's layout, rename the object files so that the object
file name contains the path in the source file tree. The intent here
is to allow two files in different parts of the source tree to have
the same name and still not collide when put into an ar archive.
Change-Id: Id627737dc95ffc65b738501215f34a995148c5a2
This change converts push to stmdb and pop to ldmia. In addition word boundaries
are obeyed using \b avoiding substituion where not appropriate.
Patch provided by ihf@chromium.org.
TEST=Used on many Daisy assembly files.
BUG=None.
Change-Id: Ie5b197b158edd0467294551d0b640c8db6530d95
On Ubuntu 12.04, we got the following warning message:
<command-line>:0:0: warning: "_FORTIFY_SOURCE" redefined
[enabled by default]
<built-in>:0:0: note: this is the location of the previous definition
This was already fixed in VP8 configure file. Did the same change in
experimental branch to stop this warning.
Change-Id: Id162e5fd8841585ae806df6560b2f7536ea307c0
The current parsing logic of the dumpmachine tuple lacks any arm
cases which means tgt_isa never gets set, so for all arm targets,
we get detected as generic-gnu. Add some basic arm checks here
so the automatic detection logic works.
Change-Id: Ie5e98142876025c6708604236bc519c0bdb09319
Latest version of all scripts/makefile but rtcd_defs.sh is empty, all
existing functions are still selected using the old/current way.
Change-Id: Ib92946a48a31d6c8d1d7359eca524bc1d3e66174
This allows building on MountainLion as the 10.6 SDK has been
removed from the latest Xcode version (4.4 4F250). Also fix
all warnings for that build.
Change-Id: Ib70bca4a25295f13595f0d10ea9f0229631de5a4
Fixed the quantifier that optionally matches a quote before the
filename. This was originally reported in the homebrew project[1].
Note that this fix is different than patch posted there, as there are
some platforms that don't have the quote, so it needs to be included
in the expression optionally.
[1]: https://github.com/mxcl/homebrew/issues/12567#issuecomment-6434000
Change-Id: Ibf2ed93ce169d80932e877f942dc4eeb03867f8b
The commit introduces a make target 'testdata' that downloads the
required test data from the WebM project website. The data will also
be downloaded if invoking `make test` but is not a strict requirement
for only building the test executable.
The download directory is taken from the LIBVPX_TEST_DATA_PATH
environment variable, or may be specified as part of the make command.
If unset, it defaults to the current directory. It's expected that
most developers will want to set this environment variable to a place
outside their source/build trees, to avoid having to download the data
more than once.
To add test data file:
1) add a line to test/test.mk:
LIBVPX_TEST_DATA-yes += foo-bar-file.y4m
2) add its sha1sum to the test/test-data.sha1 file in the following
format:
528cc88c821e5f5b133c2b40f9c8e3f22eaacc4c foo-bar-file.y4m
3) upload the file to the website
$ gsutil cp foo-bar-file.y4m gs://downloads.webmproject.org/test_data/libvpx
This implementation will check the integrity of the test data
automatically if the `sha1sum` executable is available.
Change-Id: If6910fe304bb3f5cdcc5cb9e5f9afa5be74720d2
Soft enable runtime cpu detect for armv7-android target, so that it
can be disabled and remove dependency on 'cpufeatures' lib.
Change the arm_cpu_caps implementation selection such that 'no rtcd' takes
precedence over system type.
Switch to use -mtune instead of -mcpu. NDK was complaining about
-mcpu=cortex-a8 conflicting with -march=armv7-a, not sure why.
Add a linker flag to fix some cortex-a8 bug, as suggested by NDK Dev
Guide.
Examples:
Configure for armv7+neon:
./configure --target=armv7-android-gcc \
--sdk-path=/path/to/android/ndk \
--disable-runtime-cpu-detect \
--enable-realtime-only \
--disable-unit-tests
...armv7 w/o neon:
./configure --target=armv7-android-gcc \
--sdk-path=/path/to/android/ndk \
--disable-runtime-cpu-detect \
--enable-realtime-only \
--disable-neon \
--cpu=cortex-a9 \
--disable-unit-tests
Change-Id: I37e2c0592745208979deec38f7658378d4bd6cfa
Avoid a pthreads dependency via pthread_once() when compiled with
--disable-multithread.
In addition, this synchronization is disabled for Win32 as well, even
though we can be sure that the required primatives exist, so that the
requirements on the application when built with --disable-multithread
are consistent across platforms.
Users using libvpx built with --disable-multithread in a multithreaded
context should provide their own synchronization. Updated the
documentation to vpx_codec_enc_init_ver() and vpx_codec_dec_init_ver()
to note this requirement. Moved the RTCD initialization call to match
this description, as previously it didn't happen until the first
frame.
Change-Id: Id576f6bce2758362188278d3085051c218a56d4a
The change in assembly offset files to define values as const int broke
Windows build, because the variables are stored in .rdata section instead
of .data section.
This CL changes the integer peeking from .data to .rdata.
Change-Id: I87e465ddcc78d39ec29f3720ea7df0ab807d5512
* changes:
Add initial keyframe tests
Move all tests to test/ directory
Enable unit tests by default
Build unit tests monolithically
configure: initial support for CXX, CXXFLAGS variables
Use CXX rather than assuming g++ to invoke the compiler. Also introduce
separate CXXFLAGS, as certain CFLAGS we enable by default cause warnings
with g++.
Change-Id: Ia2f40ef27c93e45c971d070cc58bdcde9da2ac7c
Allow CHOST to override the gcc -dumpmachine output. This allows to
use the target autodetection code when cross compiling by setting the
CHOST variable.
On Gentoo, we would like to support easy cross-compilation, and for
libvpx this would basically mean copying the code in
build/make/configure.sh to setup the right --target option. It seems a
lot easier to let it guess by itself.
Another option I considered was using CROSS-gcc instead but this would
not work for our multilib setups: They use gcc -m32 to build 32bits
binaries and gcc -m32 -dumpmachine will output the 64bits version,
which would then make libvpx wrongly believe it is building for a
64bits architecture.
Change-Id: I05a19be402228f749e23be7473ca53ae74fd2186
These values can be overridden with some poorly documented and
overloaded options: --libc and --sdk-path
../libvpx/configure --target=armv7-darwin-gcc --sdk-path=/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer --libc=/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS5.1.sdk/
So for someone who still wants to build with the iOS 5 SDK, the last
part of the path should be iPhoneOS5.0.sdk
Change-Id: Ibe93d96ae828c619700dc3222983aa4c30456b88
Failed to build on Linux (as described in Android.mk) with NDK r7b.
Set vpx_rtcd.h dependency after libvpx sources are added to
LOCAL_SRC_FILES so that vpx_rtcd.h is generated before any libvpx file
is touched.
Change-Id: Ibe19d485ca9f679dc084044df0e3fb14587c4d3e
When using 'make dist' after --disable-vp8[encoder|decoder] it would
fail to recognize the option. This would only occur when also specifying
--enable-install-docs and --enable-install-srcs but not
--enable-codec-srcs
Including vpx/ fixes builds with --enable-codec-srcs
vpx_timer.h is also required for vpxenc.c
Change-Id: Ie3e28b2f7ec7ee6d5961d3843f9eab869f79c35b
Newer XCodes have moved the SDK path from /Developer/SDKs
Use a suggestion from jorgenisaksson@gmail.com to locate it
osx_sdk_dir is not required to be set. Apple now offers a set
command line tools which do not require this. isysroot is also
not required in newer versions of XCode so only set it when we
are confident in the location.
There remain issues with the iOS configure steps which will be
addressed later
Change-Id: I4f5d7e35175d0dea84faaa6bfb52a0153c72f84b
Built in echo in 'sh' on OS X does not support -n (exclude trailing
newline). It's not necessary so just leave it off. Fixes issue 390.
Build include guard using 'symbol' so that it is more likely to be
unique.
Change-Id: I4bc6aa1fc5e02228f71c200214b5ee4a16d56b83
This is a proof of concept RTCD implementation to replace the current
system of nested includes, prototypes, INVOKE macros, etc. Currently
only the decoder specific functions are implemented in the new system.
Additional functions will be added in subsequent commits.
Overview:
RTCD "functions" are implemented as either a global function pointer
or a macro (when only one eligible specialization available).
Functions which have RTCD specializations are listed using a simple
DSL identifying the function's base name, its prototype, and the
architecture extensions that specializations are available for.
Advantages over the old system:
- No INVOKE macros. A call to an RTCD function looks like an ordinary
function call.
- No need to pass vtables around.
- If there is only one eligible function to call, the function is
called directly, rather than indirecting through a function pointer.
- Supports the notion of "required" extensions, so in combination with
the above, on x86_64 if the best function available is sse2 or lower
it will be called directly, since all x86_64 platforms implement
sse2.
- Elides all references to functions which will never be called, which
could reduce binary size. For example if sse2 is required and there
are both mmx and sse2 implementations of a certain function, the
code will have no link time references to the mmx code.
- Significantly easier to add a new function, just one file to edit.
Disadvantages:
- Requires global writable data (though this is not a new requirement)
- 1 new generated source file.
Change-Id: Iae6edab65315f79c168485c96872641c5aa09d55
A processor with ARMv7 instructions does not
necessarily have NEON dsp extensions. This CL
has the added side effect of allowing the ability
to enable/disable the dsp extensions cleanly.
Change-Id: Ie1e879b8fe131885bc3d4138a0acc9ffe73a36df
Android.mk file for using the Android NDK build
system to compile. Adds option for SDK path to
use the compiler that comes with android for testing
compiler compliance.
Change-Id: I5fd17cb76e3ed631758d3f392e62ae1a050d0d10
Current android ndk compiler does not recognize
strings for attributes. Numerical equivalents
can be found in the "ARM IHI 0045C" document.
Change-Id: I72de85b8949dc0ae5212af604fff1d5a91a828ea
The conversion script was incorrectly matching
CONFIG_POSTPROC[_VISUALIZER] and generating an
incorrect vpx_config.asm
Match both PROC and ENDP on word boundaries
Change-Id: Ic2788c3b522d4ee0afc5223b72e1b09fb52645be
'all' is the conventional target for building everything in the
makefile, but the child make was expecting all-$(target), for debugging
reasons that I don't recall exactly. Restore the expected behavior.
Change-Id: Ifbb03610b55be679ce7c5e210b7a69a156bb76b9
This adds the magic .note.GNU-stack section at the end of each ARM
asm file (when built with gas), indicating that a non-executable
stack is allowed.
Without this section, the linker will assume the object requires an
executable stack by default, forcing an executable stack for the
entire program.
Change-Id: Ie86de6a449b52d392b9e5e0479833ed8c508ee65
Replace =1 with =true for yasm tool element. This aids in upgrading
e.g., vs9 project files to vs10.
build/x86-msvs/yasm.xml generated during conversion will require the
Separator attribute to be removed for the build to complete
successfully.
Change-Id: If75c4f9a925529740048882003e9d766c5ac4f0c
- Updated -linux-rvct targets to support RVDS 4.0 and later.
- Changed optimization flag to -Otime because -O3 ruined performance
for RVCT linux targets.
- Added support for --enable-small for RVCT
- RVCT created library should be able to link with GCC
- Supports building shared linux libraries
Change-Id: Ic62589950d86c3420fd4d908b8efb870806d1233
vp8_fast_quantize_b_neon function updated and further optimized.
- match current C implementation of fast quantizer
- updated to use asm_enc_offsets for structure members
- updated ads2gas scripts to handle alignment issues
Change-Id: I5cbad9c460ad8ddb35d2970a8684cc620711c56d
Always use CFLAGS/LDFLAGS that point to headers and libvpx.a inside our
build tree before ones from the environment, which could reference
headers or libs outside the build tree.
This fixes issue 307.
Change-Id: I34d176b8c21098f6da5ea71f0147d3c49283cc45
This patch changes the release configuration of MS VS projects to
explicitly use two compiler options "Maximize Speed (/O2)" and
"Favor fast code(/Ot)".
Change-Id: I0bf8343d9ca195851332b91ec69c69ee4e31ce2a
According to the docs, this should have been enabled, but
the disassembled output shows otherwise. This improved
the encode/decode performance.
Change-Id: I45ad7e6d299b89ac3166d7ef7da75b74994344c6
update for the latest version of the ios sdk. adding
usr/lib/system fixes a missing libcache.dylib issue
make isysroot path more DRY
Change-Id: Ib748ef3dac3cac2e4848fbffa1e9a0112eac826b
cygwin doesn't support _sopen. drop down to the lowest common
denominator and merge main for all platforms. this also opens the door
for supporting multiple object formats with a single binary.
Change-Id: I7cd45091639d447434e6d5db2e19cfc9988f8630
Detect the number of available cores and limit the thread allocation
accordingly. On decoder side limit the number of threads to the max
number of token partition.
Core detetction works on Windows and
Posix platforms, which define _SC_NPROCESSORS_ONLN or _SC_NPROC_ONLN.
Change-Id: I76cbe37c18d3b8035e508b7a1795577674efc078
remove helper function and avoid shadowing all the arguments to the
stack on 64bit systems
when running with --good --cpu-used=0:
~2% on linux x86 and x86_64
~2% on win32 x86 msys and visual studio
more on darwin10 x86_64
significantly more on
x86_64-win64-vs9
Change-Id: Ib7be12edf511fbf2922f191afd5b33b19a0c4ae6
obj_int_extract was unconditionally skipping the first character in the
symbol. make sure it's actually an '_' first
Change-Id: Icfe527eb8a0028faeabaa1dcedf8cd8f51c92754
Enable extraction of assembly offsets from compiled examples in MSVS.
This will allow us to remove some stub functions from x86 assembly since
we will be able to reliably determine structure offsets at compile time.
see ARM code for examples:
vp8/encoder/arm/armv5te/
vpx_scale/arm/neon/
Change-Id: I1852dc6b56ede0bf1dddb5552196222a7c6a902f
failed to find headers in the source directory
output to stdout instead of a hardcoded file
MinGW doesn't support _sopen_s
_fstat catches non-existant files
Change-Id: I24e0aacc6f6f26e6bcfc25f9ee7821aa3c8cc7e7
add visual studio 9 to --help
remove cpp, cxx, hpp, hxx files from filter
add the ability to target project names. this will be necessary to
enable obj_int_extract
Change-Id: I407583320d8b67a0df40c07221838c42678792f7
AMD64 only implies SSE2, not SSE3. There aren't any known cases where
icc was generating SSE3 instructions since all the vectorizable code
is already in handwritten asm, so this fix is included mostly for
correctness. Fixes issue #259.
Change-Id: I993335a4740b68b559035305fb52ca725a6beaff
common/arm/vpx_asm_offsets moves up a level. prepare for muxing with
encoder/arm/vpx_vp8_enc_asm_offsets
Change-Id: I89a04a5235447e66571995c9d9b4b6edcb038e24
Adds following targets to configure script to support RVCT compilation
without operating system support (for Profiler or bare metal images).
- armv5te-none-rvct
- armv6-none-rvct
- armv7-none-rvct
To strip OS specific parts from the code "os_support"-config was added
to script and CONFIG_OS_SUPPORT flag is used in the code to exclude OS
specific parts such as OS specific includes and function calls for
timers and threads etc. This was done to enable RVCT compilation for
profiling purposes or running the image on bare metal target with
Lauterbach.
Removed separate AREA directives for READONLY data in armv6 and neon
assembly files to fix the RVCT compilation. Otherwise
"ldr <reg>, =label" syntax would have been needed to prevent linker
errors. This syntax is not supported by older gnu assemblers.
Change-Id: I14f4c68529e8c27397502fbc3010a54e505ddb43
-For targets with external build systems like visual
studio CC is not set so check_add_cflags will fail.
Only call this function if extra_cflags is set.
Change-Id: I3531bad69e9b6a59c5be1b0e8b6053ccccbc332c
Add --extra-cflags as config parameter for user defined extra CFLAGS.
Add -g to asflags when debug enabled for arm targets.
Change-Id: Ibdde7cfdda6736c1c1db45e6466bd08504a51f15
Adds native build configuration for Snow Leopard. Useful when
users configure without arguments on OSX 10.6.
Change-Id: I0bd63912a25bbfb9d4c8d58a781d0f390792429c
Use mpsadbw, and calculate 8 sad at once. Function list:
vp8_sad16x16x8_sse4
vp8_sad16x8x8_sse4
vp8_sad8x16x8_sse4
vp8_sad8x8x8_sse4
vp8_sad4x4x8_sse4
(test clip: tulip)
For best quality mode, this gave encoder a 5% performance boost.
For good quality mode with speed=1, this gave encoder a 3%
performance boost.
Change-Id: I083b5a39d39144f88dcbccbef95da6498e490134
Solaris 10 requires -lposix4 to build successfully on gcc. I only have a
Sparc machine to test with on Solaris 10, but this change leaves
OpenSolaris x86 in a usable state w/ gnu-generic.
I am of the belief that this change should fix Solaris 10 on Sparc, but
will leave other Solaris architectures as is. If someone has an x86
Solaris 10 machine to test on, they may add x86-solaris-gcc to
libvpx/configure and give it a go.
Change-Id: I17a282028bb4d3e9fd8764159f95665160f7b62a
Fix out-of-tree builds using NASM. NASM expects its include paths to
have a trailing slash. These aren't used used when doing in-tree builds
(./configure)
Change-Id: I38d469d15acb1b7e65733a2e5ca8c9d86fa4ad86
yasm has to be preferred as currently nasm produces marginally less
efficient code (longer opcodes). Filed for nasm as:
https://sourceforge.net/tracker/?func=detail&atid=106208&aid=3037462&group_id=6208
OTOH package should be built always the same, no matter which additional
packages are / are not present on the system. As the package should be
built with nasm (as yasm may not be available) we should not use yasm
even if it is possibly available.
nasm >= approx. 2.09 is required for the nasm compilation as the former
versions had a section alignment bug.
Provide nasm compatibility. No binary change by this patch with yasm on
{x86_64,i686}-fedora13-linux-gnu. Few longer opcodes with nasm on
{x86_64,i686}-fedora13-linux-gnu have been checked as safe.
Change-Id: Icb0fe39c64bbcc3bcd7972e392fd03f3273340df
Changes 'The VP8 project' to 'The WebM project', for consistency
with other webmproject.org repositories.
Fixes issue #97.
Change-Id: I37c13ed5fbdb9d334ceef71c6350e9febed9bbba
--cpu was already implemented for most of our embedded
platforms, this just extends it to x86. Corner case for
Atom processor as it doesn't respond to the --march=
option under icc.
Change-Id: I2d57a7a6e9d0b55c0059e9bc46cfc9bf9468c185
Fixes http://code.google.com/p/webm/issues/detail?id=96
The regex which postprocesses the gcc make-deps (-M) output was too
greedy and matching in the dependencies part of the rule rather than
the target only. The patch provided with the issue was not correct, as
it tried to match the .o at the end of the line, which isn't correct
at least for my GCC version. This patch matches word characters
instead of .*
Thanks to raimue and the MacPorts community for isolating this issue.
Change-Id: I28510da2252e03db910c017101d9db12e5945a27
When running configure automatically through the make dist target,
reuse the arguments passed to the original configure command.
Change-Id: I40e5b8384d6485a565b91e6d2356d5bc9c4c5928
The libs.mk file must be installed for the vpx.vcproj file to be
generated. It was being installed, but not in the src/ directory as
expected.
Also missed include files yasm.rules, quantize_x86.h
Change-Id: Ic1a6f836e953bfc954d6e42a18c102a0114821eb
Add targets x86-win32-vs9 and x86_64-win64-vs9 for support of Visual
Studio 2008-- this removes the need to convert the vs8 projects before
using them within the IDE.
Change-Id: Idb83e2ae701e07d98db1be71638280a493d770a2
The generated project is vpx.vcproj, change vpx_decoder references to
match. Remove .rules file dependency as it will be pulled from the
source tree.
Change-Id: I679db2748b37adae3bafd764dba8575fc3abde72
These are mostly vestigial, it's up to the compiler to decide what
should be inlined, and this collided with certain Windows platform SDKs.
Change-Id: I80dd35de25eda7773156e355b5aef8f7e44e179b
When the license headers were updated, they accidentally contained
trailing whitespace, so unfortunately we have to touch all the files
again.
Change-Id: I236c05fade06589e417179c0444cb39b09e4200d
vs8
- pull yasm.rules [1] into the source tree to avoid need to install
file into VC/VCProjectDefaults
- reference same w/ToolFile & RelativePath
- update arm branch to match
vs7:
- quote source file paths passed to yasm
[1]:
http://www.tortall.net/svn/yasm/trunk/yasm/Mkfiles/vc9/yasm.rules@2271
Change-Id: I52b801496340cd7b1d0023d12afbc04624ecefc3
Using uname fails e.g. on a 64-bit machine with a 32-bit toolchain.
The following gcc -dumpmachine strings have been verified:
* 32-bit Linux gives i486-linux-gnu
* 64-bit Linux gives x86_64-linux-gnu
* Mac OS X 10.5 gives i686-apple-darwin9
* MinGW gives mingw32
*darwin8* and *bsd* can safely be assumed to be correct, but *cygwin*
is a guess.
Change-Id: I6bef2ab5e97cbd3410aa66b0c4f84d2231884b05
This patch adds support for building shared libraries when configured
with the --enable-shared switch.
Building DLLs would require more invasive changes to the sample
utilities than I want to make in this patch, since on Windows you can't
use the address of an imported symbol in a static initializer. The best
way to work around this is proably to build the codec interface mapping
table with an init() function, but dll support is of questionable value
anyway, since most windows users will probably use a media framework
lib like webmdshow, which links this library in staticly.
Change-Id: Iafb48900549b0c6b67f4a05d3b790b2643d026f4
The libvpx build system was influenced by the clever design of the
FFmpeg configure script. Say so in the script header, and provide a
little introduction.
Change-Id: I4d134c77f9032d1dde72b852b444e98676b85326
Support --prefix, --libdir as a conventional way of specifying the default
installation directories. libdir is required to be a subdirectory of prefix
at this time.
Change-Id: If45d9e3129efcde83c05b7766accc9017988e715
Try to select an optimized target based on the host's uname, as this
is the expected behavior of most configure scripts.
Change-Id: I1408ece70c43487902ea6edc6450d6a55abc424a
This renames the vpx_codec/ directory to vpx/, to allow applications
to more consistently reference these includes with the vpx/ prefix.
This allows the includes to be installed in /usr/local/include/vpx
rather than polluting the system includes directory with an
excessive number of includes.
Change-Id: I7b0652a20543d93f38f421c60b0bbccde4d61b4f
Split the 'make install' target into two: install and dist. dist
retains the old make install behavior of building a "distribution"
release, with source files, build system, etc. install does what
one one expects -- installs into a tree in the filesystem, /usr/local
by default.
Change-Id: I0805681ac10f853ef94cdc3aa70981c6bea81b45
Allows the default generic-gnu target, which is selected if no
target is specified, to be build in PIC mode. The generic-gnu target
was not being selected as a gcc target, because it doesn't end in
gcc.
Change-Id: I28a2a420109c34fd87a20911f6455c8d8d5ded75
This doesn't play well with autotools, and the preprocessor magic is
confusing and unhelpful in the vp8-only context.
Change-Id: I2fcb57e6eb7876ecb58509da608dc21f26077ff1
