VP9_COMMON is the right place to segmentatation struct because it has
global segmentation parameters, not something specific to macroblock
processing.
Change-Id: Ib9ada0c06c253996eb3b5f6cccf6a323fbbba708
This commit unifies the rate-distortion cost calculation process of
luma and chroma components. It allows early termination to be enabled
later in the rd search loop of chroma components, in consistent with
luma pixels.
Change-Id: I2e52a7c6496176bf2a5e3ef338d34ceb8aad9b3d
The macro block mode info context originally contained an
entry for each 16x16 macroblock. In VP9 each entry refers
to an 8x8 region not a macro block, so the naming is misleading.
This first stage clean up changes the names of 3 entries in the
structure to remove the mb_ prefix.
TODO clean up the nomenclature more widely in respect of
mbmi and bmi.
Change-Id: Ia7305c6d0cb805dfe8cdc98dad21338f502e49c6
Enable SSE2 implementation of high precision 32x32 forward DCT. The
intermediate stacks are of 32-bits. The run-time goes down from
32126 cycles to 13442 cycles.
Change-Id: Ib5ccafe3176c65bd6f2dbdef790bd47bbc880e56
'skippable' can remain unset and negatively affect later decisions
address one aspect of issue #599
Change-Id: Iffdf0ac2e49ac481c27dc27c87fa546d4167bb28
Adds a new subpel motion estimation function that uses a 2-level
tree-structured decision tree to eliminate redundant computations.
It searches fewer points than iterative search (which can search
the same point multiple times) but has the same quality roughly.
This is made the default setting at speeds 0 and 1, while at
speed 2 and above only a 1-level search is used.
Also includes various cleanups for consistency and redundancy removal.
Results:
derf: +0.012% psnr
stdhd: +0.09% psnr
Speedup of about 2-3%
Change-Id: Iedde4866f5475586dea0f0ba4cb7428fba24eee9
Removing the old one bsize_from_dim_lookup. Now we have a way to determine
block size for plane using its subsampling values (ss_size_lookup). And
then we can find the number of pixels in the block (num_pels_log2_lookup).
Change-Id: I6fc981da2ae093de81741d3d78eaefed11015db9
Removes some unused code and speed features, and organizes the
interfaces for fractional mv step functions for use in new speed
features to come.
In the process a new speed feature - number of iterations per
step during the subpel search - is exposed.
No change when this parameter is set as the original value of 3.
Results:
subpel_iters_per_step = 3: baseline
subpel_iters_per_step = 2: psnr -0.067%, 1% speedup
subpel_iters_per_step = 1: psnr -0.331%, 3-4% speedup
Change-Id: I2eba8a21f6461be8caf56af04a5337257a5693a8
Adds a few pattern searches to achieve various tradeoffs
between motion estimation complexity and performance.
The search framework is unified across these searches so that a
common pattern search function is used for all. Besides it will
be easier to experiment with various patterns or combinations
thereof at different scales in the future.
The new pattern search is multi-scale and is capable of using
different patterns at different scales.
The new hex search uses 8 points at the smallest scale
and 6 points at other scales.
Two other pattern searches - big-diamond and square are
also added. Big diamond uses 4 points at the smallest scale and
8 points in diamond shape at the larger scales.
Square is very similar conceptually to the default n-step search
but is somewhat faster since it keeps only one survivor across
all scales.
Psnr/speed-up results on derf300:
hex: -1.6% psnr%, 6-8% speed-up
big-diamond: -0.96% psnr, 4-5% speedup
square: -0.93% psnr, 4-5% speedup
Change-Id: I02a7ef5193f762601e0994e2c99399a3535a43d2
There was no benefit having this function. For example, inside
read_switchable_filter_type switchable filter context was calculated twice.
Change-Id: I79cd5bf95cbc0f6d8bf91a2e32289e01b18dcff1
Adds a speed feature to skip all intra modes other than
DC_PRED if the source variance is small. This feature is
made part of speed 1 and up.
Results on derf300: psnr -0.07%, speedup about 1-2%
Also uses the source variance to fine-tune the early
termination criteria when FLAG_EARLY_TERMINATE is on.
This feature is made part of speed 2 and up.
Results on derf300: psnr -0.52%, speedup about 5-7%
Change-Id: I59e38aa836557cfa5405ae706fc64815cbfe4232
This changeset allows to remove vp9_switchable_interp and
vp9_switchable_interp_map arrays and make code much clear. Actually we
still have to use these mapping but only inside read_interp_filter_type and
write_interp_filter_type functions.
Change-Id: I4026c6f8c4acefba6c81421b7bacbaa52cc45f50
Removing assign_and_clamp_mv function, making implementation of clamp_mv
and clamp_mv2 more clear and consistent.
Change-Id: Iecd08e1c1bf0379f8314ebe01811f8253f4ade58
The function name rd_pick_intra4x4mby_modes is confusing, so
I changed it to rd_pick_intra_sub_8x8_y_modes to better
reflect what the function does. Also added const qualifiers
to some of the input parameters and removed camel-case.
Change-Id: I23d53d4c7af5d79ed8a471acd59a09bbb47add39
This allows us to increment the position at the band-level only as
we go from one band to the next; more importantly, that allows us to
use an add instead of multiply instruction, and omit the instruction
altogether if the band doesn't change from one coef to the next, thus
being slightly faster (probably more noticeable on systems where a
multiply is expensive, like arm).
Change-Id: I4343fe35b9f9a47fa00b217bdcbf5f91ff96c381
Used 3 * standard_deviation in internal threshold calculation
instead of fit curve. This actually approached the algorithm
better.
For comparison, similar tests were done:
The overall psnr loss is less than before.
1. derf set:
when static-thresh = 1, psnr loss is 0.329%;
when static-thresh = 500, psnr loss is 0.970%;
2. stdhd set:
when static-thresh = 1, psnr loss is 0.922%;
when static-thresh = 500, psnr loss is 1.307%;
Similar speedup is achieved. For example,
clip bitrate static-thresh psnr time
akiyo(cif) 500 0 48.952 5.077s(50f)
akiyo 500 500 48.866 4.169s(50f)
parkjoy(1080p) 4000 0 30.388 78.20s(30f)
parkjoy 4000 500 30.367 70.85s(30f)
sunflower(1080p) 4000 0 44.402 74.55s(30f)
sunflower 4000 500 44.414 68.69s(30f)
Change-Id: Ic78833642ce1911dbbd1cb6c899a2d7e2dfcc1f3
This option exists in VP8, and it was rewritten in VP9 to support
skipping on different partition levels. After prediction is done,
we can check if the residuals in the partition block will be all
quantized to 0. If this is true, the skip flag is set, and only
prediction data are needed in reconstruction. Based on DCT's energy
conservation property, the skipping check can be estimated in
spatial domain.
The prediction error is calculated and compared to a threshold.
The threshold is determined by the dequant values, and also
adjusted by partition sizes. To be precise, the DC and AC parts
for Y, U, and V planes are checked to decide skipping or not.
Test showed that
1. derf set:
when static-thresh = 1, psnr loss is 0.666%;
when static-thresh = 500, psnr loss is 1.162%;
2. stdhd set:
when static-thresh = 1, psnr loss is 1.249%;
when static-thresh = 500, psnr loss is 1.668%;
For different clips, encoding speedup range is between several
percentage and 20+% when static-thresh <= 500. For example,
clip bitrate static-thresh psnr time
akiyo(cif) 500 0 48.923 5.635s(50f)
akiyo 500 500 48.863 4.402s(50f)
parkjoy(1080p) 4000 0 30.380 77.54s(30f)
parkjoy 4000 500 30.384 69.59s(30f)
sunflower(1080p) 4000 0 44.461 85.2s(30f)
sunflower 4000 500 44.418 78.1s(30f)
Higher static-thresh values give larger speedup with larger
quality loss.
Change-Id: I857031ceb466ff314ab580ac5ec5d18542203c53
Removing unused constants, macros, and function declarations. Using
ROUND_POWER_OF_TWO macro, vp9_zero, vp9_copy where possible. Moving
#include from *.h to *.c. Merging for loops for motion vectors.
Change-Id: Ic3bf841764a2bb177128bb3a6d7aa8f68229cd13
Simplified the code that extracts and uses the motion
vectors for the 4 sub-partitions in rd_pick_partition.
Change-Id: Iaf698ef7ee3aef9edd59015e1ae065dd359b17d9
Adding plane type check condition because it was always used outside of
get_tx_type_{4x4, 8x8, 16x16}.
Change-Id: I02f0bbfee8063474865bd903eb25b54d26e07230
Although local copies of the mode member variables
(mode, ref_frame) were made, they were not used in
all places. Also, made a local copy of the
second_ref_frame member.
Change-Id: I84d8c822e5cb3d8a02fc3de8a4037ca3fea8bfad
Prevents doing duplicate IDCTs; encoding of first 50 frames of bus
(speed 0) @ 1500kbps goes from 1min4.0 to 1min3.5, i.e. 0.87% faster
overall.
Change-Id: I2df39e29ed9d5ea5e7d2704a34940ba622832ddd
Encoding time of first 50 frames of bus (speed 0) @ 1500kbps goes from
1min5.4 to 1min4.0, i.e. 2.2% faster overall.
Change-Id: I8c32f2aff9a649ce7dd49d910dc5ba16b99c3bc6
All filters are interpolating now, so we don't need this array, all
values from this array are evaluated to true.
Change-Id: I9af6d8219ae0eb984063cd15e4e2296374ae4961
many structures use bw and bh and they have different meanings. This cl attempts
to start this clean up and remove unneccessary 2 step look up log and then
shift operations...
also removed partition type multiple operation code in bitstream.c.
Change-Id: I7e03e552bdfc0939738e430862e3073d30fdd5db
Moving common encoder/decoder code to update_tx_counts. Also renaming
vp9_get_pred_probs_tx_size to get_tx_probs2 and adding get_tx_probs to
call vp9_get_pred_context_tx_size inside read_selected_tx_size only once
(twice before).
Change-Id: Ia50247f3893de88ef8e9041b0d44be44a40aaa4d
Stack the rate-distortion statistics in the sub8x8 rd loop. This allows
the encoder to skip the forward transform, quantization, and coeff cost
estimation, in the sub8x8 rd optimization search, if the motion
vector(s) are of integer pixel value, and have been tested in the
previous prediction filter type rd loops of the same block.
This gives about 2% speed-up for bus_cif at 2000 kpbs, for speed 0.
Its efficacy depends how frequently the motion search will select an
integer motion vector.
Change-Id: Iee15d4283ad4adea05522c1d40b198b127e6dd97
Mode search order in rd loop changed to better reflect
observed hit counts.
Also some adjustment of the baseline mode rd thresholds
to reflect the order change and observed frequencies.
Change-Id: I47a131cc83e11551df8add6d6d8d413d78d3a63c
This commit allows the encoder to skip a few buffer update steps in
rd_pick_best_mbsegmentation, when early breakout has been triggered
in the rd_check_segment_txsize. It provides about 1% speed-up for
bus_cif at 2000 kbps, in the settings of speed 0.
Change-Id: Ica034f10a24dec572b397d8389a2b81020ebc0b9
This patch modifies the auto_mv_step_size speed feature to
use a combination of the maximum magnitude mv from the last
inter frame, and the maximum magnitude mv for the two reference
mvs with the same reference. For arf frames, the max mav step
for the resolution is used.
The bounds therefore are slightly tighter. The feature is made
a speed 1 feature.
Rebased.
Results (when this feature is turned on over speed 0):
derfraw300: -0.046% psnr, about 5+% speedup
(tested on football: goes from 4m30.760s to 4m17.410s).
Change-Id: If492797a61b0b4b3e58c0b8f86afb880165fc9f6
Renaming vp9_sb_mv_ref_tree to vp9_inter_mode_tree, and
vp9_sb_mv_ref_encoding_array to vp9_inter_mode_encodings.
Change-Id: I0e91fbf81350d3ec5a2599064c74089b5d06133a
This prevents a duplicate memcpy of a 128-byte struct every time
set_scale_factors() is called (which is a lot), thus leading to a
decrease from 3.7 MB to 1.85 MB of struct copying per 64x64 block
RD/partition loop.
Overall, this decreases encoding time of the first 50 frames of bus
@ 1500kbps (speed 0) from 1min5.9 to 1min4.9, i.e. about a 1.5%
overall speedup. We can likely get more gains by removing the copy
of the other struct (and replacing it with an indexing) as well.
Change-Id: I3dceb7e79f71e6fe911b11cc994cf89a869dde7a
This means we only do UV intra mode selection if we find any intra
mode to actually be useful at all; in addition, we only do UV intra
mode selection for the transform sizes that were selected, rather
than all sizes available in this partition.
First 50 frames of bus @ 1500kbps (speed 0) gains about 5% with this
change.
Change-Id: I7b461eb8b803247f57896c5a9505f745b55502b3
The break statement only breaks out of the nested loop, not the
top-level loop, so it doesn't always work as intended. Changing it
to a return statement does what's intended.
Change-Id: I585419823b39a04ec8826b1c8a216099b1728ba7
This could happen during golden overlay frame coding from a previous
alt-ref frame if the special overlay code was triggered.
Change-Id: I3056d0c547cd26903b260ef93c94026e96bd9868
Encoding of first 50 frames of bus (speed 0) @ 1500kbps goes from
1min6.2 to 1min5.9, i.e. 0.5% faster overall.
Change-Id: I59d8a3b2f0a75010fa041d5e2646c8caac5bd683
Encode of first 50 frames of bus @ 1500kbps (speed 0) goes from
1min7.3 to 1min6.2, i.e. 1.7% faster overall.
Change-Id: I19d2deacfbffadd61d32551cee9586757ab4a987
Encode of first 50 frames of bus @ 1500kbps (speed 0) goes from 1min12.8
to 1min7.3, i.e. 8% faster.
Change-Id: Ia22d1c7b687316c553cc60eacae988b24e175b62
About 15% faster for bus (speed 0) first 50 frames @ 1500kbps, which
goes from 1min36 to 1min24. Results become slightly better (+0.2% on
derf/yt, +0.4% on hd), probably because of a bugfix for skipmode in
super_block_yrd(). Overall speed change (on derfraw300) is roughly
-13%. This can probably be improved further by caching best_yrd
between partition searches. Also, we might be able to get more
speedups by always doing PARTITION_NONE before PARTITIONS_SPLIT, not
just at the sb8x8 level.
Change-Id: I83736949ebd5b4a3b400ee688d7661913fefc98b
Current partition checking starts from small sizes, and then goes up
to large sizes. This experiment uses the small partitions' motion
estimation result, which is already available, to speed up the
large partition's motion estimation. We can decide to skip some
patition checkings if they are unlikely choices. We could use the
motion vector(MV) result as current partition's prediction MV, limit
the search range and reference frame.
Current result at speed 1:
psnr loss: 1.19% for stdhd, 0.287% for derf.
speed gain: 14% for sunflower(hd), 11% for akiyo.
Further improvement will be done later.
Change-Id: I5abfd070e9cace2e91e2a0247d1325df313887ab
Use an estimate based on DC_PRED for intra uv cost
within the rd loop then only do a full uv mode analysis
if an intra mode is chosen.
Significant speed gains in some cases. Currently only
enabled for speed 2 pending speed/quality tests.
Change-Id: Ie851a12400d5483bce47ec0e3ccb8516041e91c0
This commit makes the encoder to perform motion search only once
per reference frame type for each 4x4/4x8/8x4 block. For bus_cif
at 2000 kbps, the runtime goes from 253812ms -> 217817ms
(14% speed-up) for speed 0.
Change-Id: I5f17599ccc8cfaf93ccb4f98fcb6008af6d79e92
This speed feature allows the encoder to largely remove the spatial
dependency between blocks inside a 64x64 superblock, thereby removing
the need to repeatedly encode superblocks per partition type in the
rate-distortion optimization loop.
A major challenge lies in the intra modes tested in the rate-distortion
optimization loop. The subsequent blocks do not have access to the
reconstructed boundary pixels without the intermediate coding steps.
This was resolved by using the original pixels for intra prediction
in the rd loop, followed by an appropriately designed distortion
modeling on the quantization parameters. Experiments also suggested
that the performance impact is more discernible at lower bit-rate/psnr
settings. Hence a quantizer dependent threshold is applied to deactivate
skip of block coding.
For bus_cif at 2000 kbps,
speed 0: runtime 269854ms -> 237774ms (12% speed-up) at 0.05dB
performance loss.
speed 1: runtime 65312ms -> 61536ms, (7% speed-up) at 0.04dB
performance loss.
This operation is currently turned on in settings of speed 1.
Change-Id: Ib689741dfff8dd38365d8c1b92860a3e176f56ec
Implements some of the helper functions more efficiently with
lookups rathers than branches. Modeling function is consolidated
to reduce some computations.
Also merged the two enums BLOCK_SIZE_TYPES and BlockSize into
one because there is no need to keep them separate (even though
the semantics are a little different).
No bitstream or output change.
About 0.5% speedup
Change-Id: I7d71a66e8031ddb340744dc493f22976052b8f9f
Adding segmentation struct to vp9_seg_common.h. Struct members are from
macroblockd and VP9Common structs. Moving segmentation related constants
and enums to vp9_seg_common.h.
Change-Id: I23fabc33f11a359249f5f80d161daf569d02ec03
This commit fixed the mis-use of the tx_type for inverse transform
in intra4x4 rate-distortion optimization loop. It improves the
overall coding performance.
Change-Id: I7fe9953175b74890357dbcee33c138573766e980
Adds a speed feature to eliminate full-rd computation if the modeled
rd or rd based on a different parameter in the same mode is already
a lot larger than the best rd yet.
Specifically, only search the sharp and smooth filters if the modeled
rd cost based on the regular filter is within a certain factor of the
best rd cost so far. Also, skip full-rd computation of non splitmv
inter modes if the modeled rd cost based on pred error is within the
same factor of the best rd cost so far.
Also adds some enhancements in the rd search for splitmv mode to
speed things up by early breakouts. Negligible impact on performance.
Resuts on derfraw300:
psnr: -0.013% with the splitmv enhancements, -0.24% with the rd
breakout feature on.
speedup: 6% with splitmv enhancements, 20% with also residual breakout
(tested on football sequence at 600 Kbps)
Change-Id: I37abc308ea9f110c1679ce649b6a7e73ab1ad5fc
Encode time of first 50 frames of bus (speed 0) @ 1500kbps goes from
2min4.9 to 2min3.1, i.e. a 1.4% speedup overall.
Change-Id: I9b25e87974430cb942caa276410bb2eda815bd83
Changes cost_mv_ref() into doing a LUT into pre-calculated cost
arrays instead. Encode time of first 50 frames of bus (speed 0)
@ 1500kbps goes from 2min11.6 to 2min10.9, i.e. 0.5% faster overall.
Change-Id: If186e92c34c201b29cbbc058785a15c9c09e433a
Encode time of first 50 frames of bus (speed 0) @ 1500kbps goes from
2min4.9 to 2min3.1, i.e. a 1.4% speedup overall.
Change-Id: Ibe8b08d159797504c5d0c5122de1b6da3b6595e0
Overall, on all test sets, this gains about +0.2% on all metrics.
City is a clip where this really hurts (-1.0% on all metrics), I'm
not quite sure why yet. Maybe interesting to look into in the future.
Change-Id: I6f0eecb20e72f0194633270d30bf00d76d9eae78
Skips mode searches for intra and compound inter modes depending
on the best mode so far and the reference frames. The various
heuristics to be used are selected by bits from a flag. The
previous direction based intra mode search pruning is also absorbed
in this framework.
Specifically the flags and their impact are:
1) FLAG_SKIP_INTRA_BESTINTER (skip intra mode search for oblique
directional modes and TM_PRED if the best so far is
an inter mode)
derfraw300: -0.15%, 10% speedup
2) FLAG_SKIP_INTRA_DIRMISMATCH (skip D27, D63, D117 and D153
mode search if the best so far is not one of the closest
hor/vert/diagonal directions.
derfraw300: -0.05%, about 9% speedup
3) FLAG_SKIP_COMP_BESTINTRA (skip compound prediction mode
search if the best so far is an intra mode)
derfraw300: -0.06%, about 7-8% speedup
4) FLAG_SKIP_COMP_REFMISMATCH (skip compound prediction search
if the best single ref inter mode does not have the same ref
as one of the two references being tested in the compound mode)
derfraw300: -0.56%, about 10% speedup
Change-Id: I1a736cd29b36325489e7af9f32698d6394b2c495
