both the encode and decode perf tests require niklas_1280_720_30.yuv
broken since:
28eebf3 Merge "tests: add a shorter 720p test clip"
7839d03 tests: add a shorter 720p test clip
Change-Id: I51ebbf7261832e25d8f2c1da5c7df5c2e47f748e
+ add a helper function to reduce the duplication
this is a bit clearer when the environment variable is set, but the
directory is missing
Change-Id: I08f9b56122b5741bb40a5f795f7f82f5b49f1047
niklas_1280_720_30.y4m 60 frames @ 30fps
only a small number of frames are being used; this reduces the test data
download size in non-perf-test cases by >500M.
retain niklas_1280_720_30.yuv for encode+decode perf tests
Change-Id: I56b3433104acd462f952a9554280de5a3ec0b6d2
Modified the thresholds of deciding whether or not to skip
the transforms in model_rd_for_sb_y(). Used zbin[] instead
of dequant[] to be more precise. Also, modified the checking
coditions.
Rtc set borg test results (at speed 6) showed:
average PSNR gain: 0.138%, overall PSNR gain: 0.158%,
and SSIM gain: 0.177%.
The data rate test was modified slightly as suggested by
Marco.
Change-Id: Ieaf633ab77f4838cb3c45cf69065b29d55f8ae6c
There is a corner case that when a frame is corrupted, the following
inter frame decode worker will miss the previous failure. To solve
this problem, a need_resync flag needs to be added to master thread
to keep control of that.
Change-Id: Iea9309b2562e7b59a83dd6b720607410286c90a6
use VP[89]_INSTANTIATE_TEST_CASE case when possible to disable the tests if
the codec is unavailable.
broken since:
be6aead Try again to merge branch 'frame-parallel' into master branch.
Change-Id: I8d81c5ba3b951f82be94bfaed6be194e4289baec
cm->frame_bufs[].idx values were made consistent in:
61c5e94 Use -1 consistently as invalid buffer idx
update the initialization in swap_frame_buffers() to match.
additionally:
- remove some shadowed variables in the former and marked them volatile
Change-Id: Ie3f9636c405bd822112bb56bd22d28024ae98909
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls.
Current frame parallel decode will only speed up the decoding for frame
parallel encoded videos. For non frame parallel encoded videos, frame
parallel decode is slower than serial decode due to lack of loopfilter
worker thread.
There are still some known issues that need to be addressed. For example:
decode frame parallel videos with segmentation enabled is not right sometimes.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
This reverts commit a18da9760a.
Change-Id: I361442ffec1586d036ea2e0ee97ce4f077585f02
On Nexus 7 speed -6 saw ~18% increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
BUG=https://code.google.com/p/webm/issues/detail?id=908
Change-Id: I70ccdea0326750552ed946fb004507d6efe02d5c
On Nexus 7 speed -6 saw ~15% increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
BUG=https://code.google.com/p/webm/issues/detail?id=908
Change-Id: I4b2006b644c488f42bf06d8a22ef0e6120a96bf9
On Nexus 7 speed -6 saw ~30% increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
BUG=https://code.google.com/p/webm/issues/detail?id=908
Change-Id: Id12af7d1883243c23e6692e898aea82299633d58
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls. VP9 frame parallel decode is >30% faster than serial
decode with tile parallel threading which will makes devices play 1080P
VP9 videos more easily.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
Change-Id: Ib92eb35851c172d0624970e312ed515054e5ca64
On Nexus 7 speed -5, -6, -7, and -8 saw about a 1% increase
in perf for 480p. Speeds -5, -6, -7, and -8 saw about a 1.5%
increase in perf for 720p.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
Change-Id: Ibf17ebfd952a6aec941719bd8306df8ec4574bee
This commit adds encoder side control for vp9 to set color space info
in the output compressed bitstream.
It also amends the "vp9_encoder_params_get_to_decoder" test to verify
the correct color space information is passed from the encoder end to
decoder end.
Change-Id: Ibf5fba2edcb2a8dc37557f6fae5c7816efa52650
On Nexus 7 speed -5, -6, -7, and -8 saw about a 15% increase
in perf for 480p. Speeds -5, -6, -7, and -8 saw about a 10%
increase in perf for 720p.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
Change-Id: I2fa5315845e3021c9a6e2ea47e52e68b398d8334
This commit added a field to vpx_image_t for indicating color space,
the field is also added to YUV_BUFFER_CONFIG. This allows the color
space information pass through the decoder from input stream to the
output buffer.
The commit also updated compare_img() function with added verification
of matching color space to ensure the color space information to be
correctly passed from encode to decoder in compressed vp9 streams.
Change-Id: I412776ec83defd8a09d76759aeb057b8fa690371
Add optimized Neon functions of:
vp9_variance32x64
vp9_variance64x32
vp9_variance64x64
On Nexus 7 speed -5 and -6 saw about a 4% increase in perf.
Speeds -7 and -8 saw about a 6% increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
Change-Id: I5a81f13c9897eb927fa39662530f5524a0f768fa
The denoiser sensitivity level should be set to 1 starting from
key frame. The internal function of denoiser should make the
temporal denoising operations cut off in key frame coding.
Change-Id: Id3e704a73e98e4ea801284a2cbbab2ea9c371d23
VP9FrameSizeTestsLarge.OneByOneVideo has been causing a failure in
jenkins libvpx__unit_tests-valgrind_long for "using of uninitialized
memory", the root cause was that the input image for this test was
not initialized with proper size, therefore plan U and V were not
initialized at all.
This commit fixes the size initialization, and resolves the issue.
Change-Id: Ic4dd1542b7bb0cb260a1e0aeeb505db21ae5edc8
This allows us to track decode speed for new encodes so that we catch
problems like an encode change that makes decode really slow.
Change-Id: I7210196415c4e53d455e9c81246d9fb324913a06
Encode the files with 1, 2, and 4 threads.
Explicitly turn on error resilient and frame parallel
decoding and turn off altref frames.
Change-Id: I02b66f72b7d35c666c3ba685b33015508e440209
The unit tests for VP9 multi-threaded encoder are added, which
carry out tests for all three modes(i.e. kTwoPassGood, kOnePassGood
and kRealTime), and speeds ranging from 1 to 8. A 1280x720 test
clip is used, which is encoded into multiple tiles. The number of
threads is num_of_tiles.
Change-Id: I04419eeca145ad841c9c527603668239a82e7fbd
The encoder initialization is called in EncodeFrame(). Therefore,
in the unit tests, the set control is done when video->frame() is 1.
This didn't cause problem since current tests mainly test lag_frame
> 0 case, or no encoding option that needs to allocate memory before
1st frame is used. If use lag_frame = 0 and encoding multiple tiles,
the unit tests crash. The issue is fixed by doing the initialization
before encoding frames.
Change-Id: I43102048f88448bcf27e9c60e0ec06c176b02e5c
Add vp9_iht8x8_add_neon.c
- vp9_iht8x8_64_add_neon
The assembly did not previously implement tx_type 0
BUG=716
Change-Id: Icfc99dd24f3d59047f9184a7d0c761ba7e3de934
Signed-off-by: James Yu <james.yu@linaro.org>
Add vp9_iht4x4_add_neon.c
- vp9_iht4x4_16_add_neon
The assembly did not previously implement tx_type 0
BUG=715
Change-Id: I60034d1568de034edba45c5cdd13f3d87dbc73b6
Signed-off-by: James Yu <james.yu@linaro.org>
Fails to compile. Bad calls to vp9_alloc_frame_buffer
and vp9_realloc_frame_buffer in postproc.c
This reverts commit 399823b6f5.
Change-Id: I29f0e173f8e185d3a303cfdb17813e1eccb51e3a
Add support for setting byte alignment on the Y, U, and V plane of the
reference buffers. The byte alignment must be a power of 2, from 32 to
1024. A value of 0 sets legacy alignment.
Change-Id: I7c1399622f7aa68e123646369216b32047dda73d
Assembly tests should clear system state, as we have no
expectation of proper system state in between test runs..
Change-Id: I0f591996c1f17ef2a5a8572a6b445f757223a144
This allows us to track decode speed for new encodes so that we catch
problems like an encode change that makes decode really slow.
Change-Id: I92251a8b1f710b241f66e1042413df1b71b76038
Adds decoder config as a changeable parameter to unit tests, and
changes end to end test to use commonly used parameters to enable
base test of tiles encoding and frame parallel decoding.
Change-Id: I5d23a6857303b4d68b92b15c3f2f04a1bcb4c2bb
the gtest implementation used only returns values between 0 and 2^31-1
+ temporarily disable some tests in fdct8x8_test which misbehave with the
new range
Change-Id: I45381076f0bea3317cc6728305890e4fd2f2facd
the gtest implementation used only returns values between 0 and 2^31-1
+ temporarily disable some tests in lpf_8_test which misbehave with the
new range
Change-Id: I8a026680c4b8c12dc14d4f24c33edb2315963114
