A bug in Microsoft compiler was found in the function
vp9_filter_block1d16_v8_avx2 and a workaround applied.
the bug occur when there was 4 consecutive maddubs + min + adds
intrinsic instructions.
Change-Id: I83499faeb70971e650e5663fd2490360ddb1a51b
An overflow issue could potentially happen in the second round 1-D
transform of the SSSE3 full inverse 16x16 2D-DCT. This commit fixes
this issue.
Change-Id: Ia19e4888fda1cc929a28a5f89a5beec612d628dc
This commit enables SSSE3 implementation of the inverse 2D-DCT
with only first 10 coefficients non-zero. It reduces the runtime
of SSE2 version from 745 cycles to 538 cycles, i.e., 27% speed-up.
Change-Id: I18ba4128859b09c704a6ee361d69a86c09fe8dfe
The subpixel SSSE3 was fixed in this patch:
https://gerrit.chromium.org/gerrit/#/c/70283/
So the equivalent AVX2 is fixed accordingly.
Change-Id: Ieebbc1949c99d34b12b8b47692df71aca5001f3a
This commit enables the SSSE3 implementation of full inverse 16x16
2D-DCT. The unit runtime goes down from 1642 cycles to 1519 cycles,
about 7% speed-up.
Change-Id: I14d2fdf9da1fb4ed1e5db7ce24f77a1bfc8ea90d
In 8-tap filtering, to guarantee the intermediate results fit in
16 bits, the order of accumulating the products needs to be done
correctly, and the largest product should be added last. This
patch fixed the problem using the method in commit "Correct ssse3
8/16-pixel wide sub-pixel filter calculation".
Change-Id: I79d0ad60c057b15011ece84cda9648eee0809423
As mismatchs were found between the intrinsic version and c only. The
commit temporarily revert to use the matching assembly version to
allow further investigation.
Change-Id: I08436c47d4888b562c0eac8e8856d90a831442df
This did the same correction as the one in commit "Correct ssse3
8/16-pixel wide sub-pixel filter calculation" to avoid saturation
during filtering.
Change-Id: Ife9aa3f62daf9114eb24fe38f7baa3c3f361b2d6
Renames all x86_64 specific assembly files to consistently
end in _x86_64.asm. This will be useful for build systems to
handle these files differently.
All new 64-bit specific assembly files should use the new
naming convention.
Change-Id: I36c89584967c82ffc4088b1b5044ac15d2bb7536
The scanning order has the first 12 coefficients of the 8x8 2D-DCT
sitting in the top left 4x4 block. Hence the partial inverse 8x8
2D-DCT allows to handle cases with eob below 12.
The overall runtime of the inverse 8x8 2D-DCT unit is reduced from
166 cycles (using SSE2) to 150 cycles (using SSSE3).
Change-Id: I4514f9748042809ac84df4c14382c00f313f1cd2
This commit enables ssse3 assembly implementation of the 8x8
inverse 2D-DCT with only first 10 coefficients non-zero. The
average runtime for this unit goes down from 198 cycles to 129
cycles (34.8% faster).
Change-Id: Ie7fa4386f6d3a2fe0d47a2eb26fc2a6bbc592ac7
This commit enables SSSE3 version full inverse 8x8 2D-DCT and
reconstruction. It makes the runtime of vp9_idct8x8_64_add down
from 256 cycles (SSE2) to 246 cycles.
Change-Id: I0600feac894d6a443a3c9d18daf34156d4e225c3
This patch fixed the uninitialized read errors in Issue 748:
"dr memory VP9 encode errors". In vp9_convolve_avg_sse2,
when width is 4, pavgb reads 8 bytes from dst buffer that is
out of range. An error is reported although the data is not
actually used later. This issue was resolved by preventing
uninitialized reads.
Change-Id: I109a54910aa47139cb13119de86f2062cff207df
The macosx release of clang v5.0 identifies itself as:
Apple LLVM version 5.0 (clang-500.2.79) (based on LLVM 3.3svn)
This version of clang uses the older _mm_broadcastsi128_si256, like
v3.3, as given away in the LLVM svn version above.
Change-Id: I4d6d59d5454efd57d2ae9e75f5eb7486af7cbd0c
clang reports gcc-4.2.1 in e.g., 3.3, 3.4; add a specific clang version
check for _mm256_broadcastsi128_si256
fixes issue #720
Change-Id: I5c8e3c27fdea05d8a5b050e8cb74894b595f4709
Optimizing all SSSE3 assembly for convolution:
1. vp9_filter_block1d4_h8_sse2
2. vp9_filter_block1d8_h8_sse2
3. vp9_filter_block1d16_h8_sse2
4. vp9_filter_block1d4_v8_sse2
5. vp9_filter_block1d8_v8_sse2
6. vp9_filter_block1d16_v8_sse2
my optimization include:
-processing 2x8 elements in one 128 bit register instead of processing
8 elements in one 128 bit register.
-removing unecessary loads.
This optimization gives between 2.4% user level gain for 480p input
and 1.6% user level gain for 720p.
This Optimization is done only for 64 bit
Change-Id: Ic07fce2f9360329b4f2d956efda1480ae958766b
Two convolve functions were optimized for AVX2:
1. vp9_filter_block1d16_h8
2. vp9_filter_block1d16_v8
vp9_filter_block1d16_v8 was optimized for AVX2 by reducing the number of
loop strides by half, two strides were processed in parallel.
vp9_filter_block1d16_v8 was also optimized in the same way also some of the
loads were being done outside of the loop and by that preventing redundant
loads.
This Optimization gives 43% function level gain and 1.3% user level gain.
Now can be compiled in Windows
Change-Id: I2714124cfb0c14a77d7a0ce126a20db92ffbf92c
This patch added ssse3 optimization of bilinear sub-pixel filters.
The real time encoder was speeded up by ~1%.
Change-Id: Ie82e98976f411183cb8c61ab8d2ba0276e55a338
Using bilinear filters could speed up the codec in real-time mode.
This patch added sse2 optimizations of bilinear filters that
operate on different-sized blocks.
Tests showed that the real-time encoder was speeded up by 3%.
Change-Id: If99a7ee4385fcc225c3ee7445d962d5752e57c3f
This commit further optimizes SSE2 operations in the second 1-D
inverse 16x16 DCT, with (<10) non-zero coefficients. The average
runtime of this module goes down from 779 cycles -> 725 cycles.
Change-Id: Iac31b123640d9b1e8f906e770702936b71f0ba7f
Optimizing all SSSE3 assembly for convolution:
1. vp9_filter_block1d4_h8_sse2
2. vp9_filter_block1d8_h8_sse2
3. vp9_filter_block1d16_h8_sse2
4. vp9_filter_block1d4_v8_sse2
5. vp9_filter_block1d8_v8_sse2
6. vp9_filter_block1d16_v8_sse2
my optimization include:
-processing 2x8 elements in one 128 bit register instead of processing
8 elements in one 128 bit register.
-removing unecessary loads.
This optimization gives between 2.4% user level gain for 480p input
and 1.6% user level gain for 720p.
This Optimization done only for 64bit.
Change-Id: Icb586dc0c938b56699864fcee6c52fd43b36b969
This commit is the first patch optimizing SSE2 implementation of inverse
16x16 DCT with <10 non-zero coefficients. It focused on the first 1-D (row)
transformation. It exploits the fact that only top-left 4x4 block contains
non-zero coefficients, in a 2-D inverse 16x16 DCT with <10 coeffients.
The average runtime of idct16x16_10 unit is reduced from
883 cycles -> 779 cycles (12% faster).
For pedestrian_area_1080p 300 frames at 4000 kbps, the speed 2 runtime goes
down from 310651 ms -> 305910 ms. The decoding speed goes up from
80.37 fps -> 80.87 fps.
Change-Id: Ic6f3ac5a637a76c07ba73ddaafe318a699fea645
This commit adds input/output ports for IDCT8_1D macro function to
provide more flexibility in variable use. It allows to skip several
buffer swap operations.
Change-Id: I21f3450509537322293043b3281bfd3949868677
This commit merges the initial buffer swap operations in idct8_1d_sse2
into the array transpose step, hence reducing number of instructions
therein.
Change-Id: I219f6f50813390d2ec3ee37eecf2a4a2b44ae479
