Compare the estimated rate and distortion to the thresholds scaled
according to the operating block size and determine if further
split partition search will be run. The compression performance of
speed -5 is changed by -0.074%. The encoding speed is 10% - 15%
faster.
vidyo1 720p
16545 b/f, 40.492 dB, 11475 ms -> 16535 b/f, 40.486 dB, 10100 ms
nik720p
16624 b/f, 36.310 dB, 10071 ms -> 16617 b/f, 36.313 dB, 8346 ms
Change-Id: Ic9197ab5761279ae55d2fb7813b2af0e0db497b8
This commit replaces the use of copy_partitioning with
choose_partitioning based on the sse of subsamped pixels, which
provides significantly better coding performance and runs at
similar speed, as compared to copy_partitioning. It improves rtc
speed 5 coding performance by 3%.
Change-Id: I52d3682a12dce0147f5e52383a594fc242ca3228
- Some fixes to surface fit.
- Returns variance function as cost rather than sad in the
pattern search and diamond search functions. Only
vp9_pattern_search_sad function used in bigdia search
uses sad as integer 1-away costs.
- Deploys SUBPEL_TREE_PRUNED_MORE for speed 4+.
Results:
derf [Speed 3]: About +0.036% in coding efficiency without any
discernible speed loss.
derf [Speed 4]: About 2-3% faster at -0.199% loss in coding efficiency.
derf [Speed 5]: About 3-4% faster at -0.149% loss in coding efficiency.
Change-Id: I8462f94f6adb46966ca964f2bd0400977357fd63
In model_rd_for_sb function, the spatial domain SSE and variance
are checked to see if transform coefficients are quantized to 0.
Besides that, this patch adds another set of thresholds that are
much more strict. These thresholds are used to conduct a partition
block level check to measure if all its TX blocks are skippable
for YUV planes. If it is true, x->skip is set for this partition
block, and thus its mode search is terminated.
This speeds up the encoding at very low prediction error case,
such as screen sharing application. This patch covers what
rd_encode_breakout_test() does, so that function is removed.
Borg test at speed 3 shows:
For stdhd set, psnr: +0.008%, ssim: +0.014%;
For derf set, psnr: +0.018%, ssim: +0.025%.
No noticeable speed change.
Change-Id: I4e5f15cf10016a282a68e35175ff854b28195944
The concept:
There's too much noise in source pixels for variance and at low bitrate
the reconstructed looks nothing like the source so we have problems
getting good partitionings with either. This skirts the issue by using
a box blur scaled down version for variance calculations. To compare
against source_var_ moved keyframe to be rd based like source_var.
Change-Id: Ie3babdbfadae324b7b5a76bea192893af27f0624
This commit enables the encoder to skip split partition search if
the bigger block size has all non-zero quantized coefficients in low
frequency area and the total rate cost is below a certain threshold.
It logarithmatically scales the rate threshold according to the
current block size. For speed 3, the compression performance loss:
derf -0.093%
stdhd -0.066%
Local experiments show 4% - 20% encoding speed-up for speed 3.
blue_sky_1080p, 1500 kbps
51051 b/f, 35.891 dB, 67236 ms ->
50554 b/f, 35.857 dB, 59270 ms (12% speed-up)
old_town_cross_720p, 1500 kbps
14431 b/f, 36.249 dB, 57687 ms ->
14108 b/f, 36.172 dB, 46586 ms (19% speed-up)
pedestrian_area_1080p, 1500 kbps
50812 b/f, 40.124 dB, 100439 ms ->
50755 b/f, 40.118 dB, 96549 ms (4% speed-up)
mobile_calendar_720p, 1000 kbps
10352 b/f, 35.055 dB, 51837 ms ->
10172 b/f, 35.003 dB, 44076 ms (15% speed-up)
Change-Id: I412e34db49060775b3b89ba1738522317c3239c8
One is a more aggressive version of the pruned subpel tree
search where only a single halfpel candidate is searched.
The search candidate is based on a surface fit result.
The other is a method to obtain the subpel position at one
shot based on the same surface fit.
The methods have not been deployed in any speed setting yet.
Change-Id: I34fef3f2e34f11396c9d1ba97f4be8c4ffca62d3
This patch re-enabled the feature in Pengchong's patch
(commit 1286126073). Originally, it
was turned on while use_lastframe_partitioning > 0(not used anymore).
Now it was added as a feature, and turned on while speed >= 2.
As described in the original patch, this feature helps speed up the
slideshows in YouTube.
Change-Id: I1b0f18d65da1ee1c8d1e117dabba910c5207c471
The rd_thresholds are adaptively changed based on best mode tested.
It was only changed for the same block size, this commit makes the
adaptation for similar block sizes too. The commit also made minor
adjustment and code cleanups.
The impact on encoding time for _ped:
118089 ms -> 111927 ms
The impact on compression:
derf: -0.339%
stdhd: -0.303%
Change-Id: I8817fed1102350497f2ec631849e43f753878e5d
Adds code to return an integer cost list for NSTEP search. Then
uses it for pruned subpel search in speed 3.
derf: -0.06%
Speed on mobcal 720p increaes from 10.28 fps to 10.65 fps.
[Subject to further testing].
Change-Id: Ib591382d25b2c11bcaba9d3a27a93a9d1ab27a96
Improves function to return sad of integer pels by reusing integer
pels already visited in the smallest scale.
Turns on BIGDIA search for speed 4. Also, turns on the
first version of the pruned subpel search at this speed.
derf: -0.32% (speed 4)
Speed seems to improve by at least 5% but subject to verification.
Change-Id: Iaec8eaffd61d6237ac029e6a2a1b0a88b2a35271
The speed feature that skips compound inter prediction modes was
subsumed by other speed features and effectively was not in use.
This commit removes it.
Change-Id: I22b0c71a8ddd15d93b25d86fa63a1dce2ba6a1a9
This commit refactor the rate-distortion optimization search for
regular block sizes to remove the speed feature dependency on mode
search order.
Change-Id: Ied033ee484c2957e17baa7b6450b720fe7dd0e7d
The use of use_lastframe_partitioning is totally removed in good-
quality encoding. Its usage in real-time encoding needs to be
evaluated to see if it can be removed too.
The Borg tests at speed 4 showed:
stdhd set: 0.220% psnr gain, 0.166% ssim gain;
derf set: 0.329% psnr gain, 0.476% ssim gain.
Speed test on selected clips showed 1.54% speedup.(Worst case:
pedestrian_area_1080p25.y4m, speed loss: 1.5%)
Change-Id: I1c844d329b0b5678558439b887297c1be7ddab00
The speedup in rd_pick_partition() function makes it possible
to drop use_lastframe_partitioning feature. By doing that, we
achieve good PSNR gain with small speed loss. Also, this makes
encoding loop less complicated. The code cleanup patch will
follow.
Borg tests showed:
1. At speed 2,
stdhd set: 0.201% PSNR gain, 0.133% SSIM gain;
derf set: 0.262% PSNR gain, 0.276% SSIM gain.
2. At speed 3,
stdhd set: 0.139% PSNR gain, 0.109% SSIM gain;
derf set: 0.447% PSNR gain, 0.442% SSIM gain.
The average speed loss over selected test clips is within 1%
with the worst case of 4%.
Change-Id: Icfd2ded7869372b585a6972855d933b3d0280d90
From 3 to 2, which seems to be slightly positive on compression for
all test sets, also reduces encoding time by 2%-5%, varying on the
test clips.
Change-Id: If045417bd27311700c919b4a335eff0dc1130ae0
This commit allows encoder to skip intra coding mode test, when
the known inter residual is less than the source variance. It
reduces the runtime of speed 3 for test clips:
bus cif 1000 kbps: 8587 ms -> 8260 ms, 3.8% speed-up
pedestrian 1080p 2000 kbps: 161381 ms -> 155241 ms, 3.7% speed-up.
The compression performance is down by
derf -0.36%
stdhd -0.25%
Change-Id: I75ce1e035b4da2153cb1ac14111d1a07c05a735d
In the partition search, the encoder checks all possible
partitionings in the superblock's partition search tree.
This patch proposed a set of criteria for partition search
early termination, which effectively decided whether or
not to terminate the search in current branch based on the
"skippable" result of the quantized transform coefficients.
The "skippable" information was gathered during the
partition mode search, and no overhead calculations were
introduced.
This patch gives significant encoding speed gains without
sacrificing the quality.
Borg test results:
1. At speed 1,
stdhd set: psnr: +0.074%, ssim: +0.093%;
derf set: psnr: -0.024%, ssim: +0.011%;
2. At speed 2,
stdhd set: psnr: +0.033%, ssim: +0.100%;
derf set: psnr: -0.062%, ssim: +0.003%;
3. At speed 3,
stdhd set: psnr: +0.060%, ssim: +0.190%;
derf set: psnr: -0.064%, ssim: -0.002%;
4. At speed 4,
stdhd set: psnr: +0.070%, ssim: +0.143%;
derf set: psnr: -0.104%, ssim: +0.039%;
The speedup ranges from several percent to 60+%.
speed1 speed2 speed3 speed4
(1080p, 100f):
old_town_cross: 48.2% 23.9% 20.8% 16.5%
park_joy: 11.4% 17.8% 29.4% 18.2%
pedestrian_area: 10.7% 4.0% 4.2% 2.4%
(720p, 200f):
mobcal: 68.1% 36.3% 34.4% 17.7%
parkrun: 15.8% 24.2% 37.1% 16.8%
shields: 45.1% 32.8% 30.1% 9.6%
(cif, 300f)
bus: 3.7% 10.4% 14.0% 7.9%
deadline: 13.6% 14.8% 12.6% 10.9%
mobile: 5.3% 11.5% 14.7% 10.7%
Change-Id: I246c38fb952ad762ce5e365711235b605f470a66
Updates the vp9_pattern_search function to return integer one-away
neighbors' sad values, for subsequent use in speeding up the
sub-pel search. Also, removes code for the do_refine option
which is not being used currently.
Updates the integer and subpel functions to pass in a 5-element
sad list for output or input.
A new pruned sub-pel search algorithm is implemented that uses
the sad returned from the integer pel search. But it is not
deployed yet.
Change-Id: Ifa9f5ad024b5b660570366d2bd900343e1891520
This commit addes a new strategy to reduce the search for optimal
interpolation filter type. The encoder counts and store how many each
filter type is selected and used for each of the reference frames.
A filter type that is rarely used for all three reference frames is
masked out to avoid computation.
The impact on compression is neglectible:
-0.02% on derf
+0.02% on stdhd
Encoding time is seen to reduce by 2~3%.
Change-Id: Ibafa92291b51185de40da513716222db4b230383
In the full-rd transform size search, we go through all transform
sizes to choose the one with best rd score. In this patch, an
early termination is added to stop the search once we see that the
smaller size won't give better rd score than the larger size. Also,
the search starts from largest transform size, then goes down to
smallest size.
A speed feature tx_size_search_breakout is added, which is turned off
at speed 0, and on for other speeds. The transform size search is
turned on at speed 1.
Borg test results:
1. At speed 1,
derf set: psnr gain: 0.618%, ssim gain: 0.377%;
stdhd set: psnr gain: 0.594%, ssim gain: 0.162%;
No noticeable speed change.
3. At speed 2,
derf set: psnr loss: 0.157%, ssim loss: 0.175%;
stdhd set: psnr loss: 0.090%, ssim loss: 0.101%;
speed gain: ~4%.
Change-Id: I22535cd2017b5e54f2a62bb6a38231aea4268b3f
This commit enables the encoder to record the location of the
center frame to generate alter reference frame. It then allows to
skip checking prediction modes of other reference frame types when
it comes to encode this frame.
The speed 3 runtime is reduced for the test sequences:
bus at CIF 1000 kbps, 9791 ms -> 9446 ms, i.e., 3.5% speed-up,
pedestrian at 1080p 2000 kbps, 184043 ms -> 175730 ms, i.e., 4.5%
speed-up.
No compression performance change observed.
Change-Id: Iacfde3bcc1445964e7a241f239bd6ea11cb94bd1
Add a speed feature to give the tighter partition search
range. Before partition search, calculate the histogram
of the partition sizes of the left, above and previous
co-located blocks of the current block. If the variance of
observed partition sizes is small enough, adjust the search
range around the mean partition size, which will be tigher.
The feature is currently turned on at speed 2. Experiments on
sample youtube clips show on average the runtime is reduced
by 3-7%.
For hard stdhd clips:
park_joy_1080p @ 15000kbps: 509251 ms -> 491953 ms (3.3%)
pedestrian_area_1080p @ 2000kbps: 223941 ms -> 214226 ms (4.3%)
The PSNR performance is changed:
derf: -0.112%
yt: -0.099%
hd: -0.090%
stdhd:-0.102%
Change-Id: Ie205ec5325bf92ec5676c243e30ba9d0adca10f2
At --good and speed 3 or above for resolution less than 720p. This
disables the tests for 64x64 intra prediction modes. Encoding time
reduction is about 1%.
Change-Id: Ib396e3d1417fece416e3f0fee929b128acbb130f
This commit moves the simplified coefficient probability model
and costing update to speed 4, and turns on chessboard pattern
mode search for sub 720p sequences. The overall coding performance
of speed 3 is improved:
derf 0.889%
stdhd 1.744%
The speed 3 runtime for test sequences are improved:
bus cif at 1000 kbps 9823 ms -> 9642 ms
pedestrian 1080p 2000 kbps 189559 ms -> 183284 ms
Change-Id: Iecbc7496a68f31fd49fb09f8dfd97c028d675a5d
This commit allows the encoder to check the above and left neighbor
blocks' reference frames and motion vectors. If they are all
consistent, skip checking the NEARMV and ZEROMV modes. This is
enabled in speed 3. The coding performance is improved:
pedestrian area 1080p at 2000 kbps,
from 74773 b/f, 41.101 dB, 198064 ms
to 74795 b/f, 41.099 dB, 193078 ms
park joy 1080p at 15000 kbps,
from 290727 b/f, 30.640 dB, 609113 ms
to 290558 b/f, 30.630 dB, 592815 ms
Overall compression performance of speed 3 is changed
derf -0.171%
stdhd -0.168%
Change-Id: I8d47dd543a5f90d7a1c583f74035b926b6704b95
At speed 6 the smallest partitioning was 16x16 and biggest
intra block was 8x8, essentially disallowing all intra blocks
which produces ugly artifacts when revealing new video.
Change-Id: I364042d4c64e09be0666ade64aac94d0a1b586cf
We had a very complicated way to initialize cpi->pass from
cfg->g_pass:
switch (cfg->g_pass) {
case VPX_RC_ONE_PASS:
oxcf->mode = ONE_PASS_GOOD;
break;
case VPX_RC_FIRST_PASS:
oxcf->mode = TWO_PASS_FIRST;
break;
case VPX_RC_LAST_PASS:
oxcf->mode = TWO_PASS_SECOND_BEST;
break;
}
cpi->pass = get_pass(oxcf->mode).
Now pass is moved to VP9EncoderConfig and initialization is simple:
switch (cfg->g_pass) {
case VPX_RC_ONE_PASS:
oxcf->pass = 0;
break;
case VPX_RC_FIRST_PASS:
oxcf->pass = 1;
break;
case VPX_RC_LAST_PASS:
oxcf->pass = 2;
break;
}
Change-Id: I8f582203a4575f5e39b071598484a8ad2b72e0d9
