This removes an unnecessary restriction that causes
a problem (noticed by AWG) when the forced key frame
interval is set to a very small value, such as 10. In this case
we were being forced to code minimal length GF groups.
Change-Id: I76ef5861a09638ff51f61fea02359554184ada53
Allow min and maxQ to creep when the undershoot
or overshoot exceeds thresholds controlled by the
command line under_shoot_pct and over_shoot_pct
values.
Default is 100%,100% which ~disables adaptation.
Derf results for example undershoot% / overshoot%:-
Head:- Mean abs (%rate error) = 14.4%
This check in:-
25%/25% - Mean abs (%rate error) = 6.7%
PSNR hit -1% SSIM -0.1%
5% / 5% - Mean abs (%rate error) = 2.2%
PSNR hit -3.3% SSIM - 1.1%
Most of the remaining error and most of the quality hit is
at extreme data rates. The adaptation code still has an
exception for material that is in effect static so that we
don't over adjust and over spend on YT slide show type
content.
(Rebase of If25a2449a415449c150acff23df713e9598d64c9
to resolve a auto-merge error)
Change-Id: Iec4e1613ef0d067454751d8220edb7058dfbd816
Allow min and maxQ to creep when the undershoot
or overshoot exceeds thresholds controlled by the
command line under_shoot_pct and over_shoot_pct
values.
Default is 100%,100% which ~disables adaptation.
Derf results for example undershoot% / overshoot%:-
Head:- Mean abs (%rate error) = 14.4%
This check in:-
25%/25% - Mean abs (%rate error) = 6.7%
PSNR hit -1% SSIM -0.1%
5% / 5% - Mean abs (%rate error) = 2.2%
PSNR hit -3.3% SSIM - 1.1%
Most of the remaining error and most of the quality hit is
at extreme data rates. The adaptation code still has an
exception for material that is in effect static so that we
don't over adjust and over spend on YT slide show type
content.
Change-Id: If25a2449a415449c150acff23df713e9598d64c9
Adjustments to the GF interval choice and minimum boost.
Adjustment to the calculation of 2 pass worst q.
Compared to 09/29 head there is metrics hit on derf of
(-0.123%,-0.191%)
Compared to the September 29 head and a baseline on
September 18 baseline the accuracy of the VBR rate control
measured on the derf set is as follows:-
Mean error % / Mean abs(error %)
Sept 18 baseline (-7.0% / 14.76%)
Sept 29 head (-15.7%, 19.8%)
This check in (-1.5% / 14.4%)
The mean undershoot is reduced slightly but the
worst case overshoot on e.g. harbour/highway is
increased. This will be addressed in a later patch.
Change-Id: Iffd9b0ab7432a131c98fbaaa82d1e5b40be72b58
Substantial restructuring of the way we estimate
the rate of decay in prediction quality and determine
the arf interval and amount of boost used.
Also other changes to support moving to a lower first pass
Q which exposes some new features and allows us to better
distinguish genuinely static blocks from low motion or noisy
blocks.
Net gains now visible on all the test sets with std-hd PSNR up
1.87%. There are still some bad outlier cases but most of these
are low motion or slide show type content where the metrics
are already high at any given rate. The best + case is up by
more than 10%.
Change-Id: I18e25170053bdf3188f493ff8062f48a74515815
It's built based on current spatial svc code.
We only support one spatial two temporal layers at this time.
Change-Id: I1fdc8584354b910331e626bfae60473b3b701ba1
We had a very complicated way to initialize cpi->pass from
cfg->g_pass:
switch (cfg->g_pass) {
case VPX_RC_ONE_PASS:
oxcf->mode = ONE_PASS_GOOD;
break;
case VPX_RC_FIRST_PASS:
oxcf->mode = TWO_PASS_FIRST;
break;
case VPX_RC_LAST_PASS:
oxcf->mode = TWO_PASS_SECOND_BEST;
break;
}
cpi->pass = get_pass(oxcf->mode).
Now pass is moved to VP9EncoderConfig and initialization is simple:
switch (cfg->g_pass) {
case VPX_RC_ONE_PASS:
oxcf->pass = 0;
break;
case VPX_RC_FIRST_PASS:
oxcf->pass = 1;
break;
case VPX_RC_LAST_PASS:
oxcf->pass = 2;
break;
}
Change-Id: I8f582203a4575f5e39b071598484a8ad2b72e0d9
1. Remove last reference flag for first frame upper layers in one pass mode.
2. Disable refresh golden frame flag for key frames.
Change-Id: I44ac1bd2c795169e4fbfdd078ea79a1d33a204d6
All changes are for spatial svc only.
1. Enable encoding hidden frames in each layer and use alt reference idex to reference the hidden frame in each layer
2. Use golden reference idx for spatial reference
3. For those layers that don't have hidden frames (caused by lack of frame buffers), reference a hidden frame in lower layers
4. Add "auto-alt-refs" in svc options
Change-Id: Idf27d1fd2fb5f3ffd9e86d2119235e3dad36c178
Add indirection to the section of buffer indices.
This is to help simplify things in the future if we
have other codec features that switch indices.
Limit the max GF interval for static sections to fit
the gf_group structures.
Change-Id: I38310daaf23fd906004c0e8ee3e99e15570f84cb
This patch implements a mechanism for inserting a second
arf at the mid position of arf groups.
It is currently disabled by default using the flag multi_arf_enabled.
Results are currently down somewhat in initial testing if
multi-arf is enabled. Most of the loss is attributable to the
fact that code to preserve the previous golden frame
(in the arf buffer) in cases where we are coding an overlay
frame, is currently disabled in the multi-arf case.
Change-Id: I1d777318ca09f147db2e8c86d7315fe86168c865
If we are already saving a lot in bits from the target (maximum)
bitrate in the constrained quality mode, allow the quantizer
to go lower than the cq level. This hopefully will solve issues
with getting too low a bitrate and consequently poor quality for
certain videos in cq mode.
Change-Id: I1c4e8b0171fcf58f95198b3add85eea5f3c8f19f
Allow slightly larger minq-maxq range for P frames. This improves
the compression performance of speed -5 for rtc set by 2.7% in psnr.
Change-Id: I438653d52d0fe51111509c6092e2334bac2de0cf
tx_mode supercedes whatever mechanism is used to push for 16x16
allowing for the use of the 4x4 transform.
Change-Id: I6c3f05ab9fe52050e40cc6303de9334653763289
Merged minq tables for arf and gf cases.
These tables were almost the same and for
VBR the arf table was not used at all.
Change-Id: Ie3c87e91dab613cf06f6945ac1ace0e0e4213d34
Small adjustment to the active Q range calculations.
These changes should slightly extend the available Q range
for KF/GF/ARF and narrow it for other frames.
The results for this change in isolation are broadly positive
for SSIM and average PSNR and slightly up but mixed for opsnr.
derf +0.293% opsnr, +1.286% SSIM
std-hd + 0.528% opsnr, + 1.746% SSIM
yt +0.056% opsnr, +0.457% SSIM
yt-hd -0.147% opsnr, + 0.226% SSIM
Change-Id: If065280342027ecc5d44b49fc1d440dfef041002
This member of VP9_COMP seemed unnecessary since it
only shadowed VP9EncoderConfig.key_freq that is
accessible through VP9_COMP.
Change-Id: Ib751bb1cf1b0b3c50a2a527d7c34f6829dd6fee3
The end_useage parameter is confusingly named since it
now actually defines the rate control method used.
Change-Id: I98912caabfe556b7af0b939a645d1336409e4d71
