Declared the bmi in MODE_INFO as a union instead of B_MODE_INFO.
This reduced the memory footprint by 518,400 bytes for 1080
resolutions. The decoder performance improved by ~4% for the
clip used and the encoder showed very small improvements. (0.5%)
This reduction was first mentioned to me by John K. and in a
later discussion by Yaowu.
This is WIP.
Change-Id: I8e175fdbc46d28c35277302a04bee4540efc8d29
The error-concealer is plugged in after any motion vectors have been
decoded. It tries to estimate any missing motion vectors from the
motion vectors of the previous frame. Intra blocks with missing
residual are replaced with inter blocks with estimated motion vectors.
This feature was developed in a separate sandbox
(sandbox/holmer/error-concealment).
Change-Id: I5c8917b031078d79dbafd90f6006680e84a23412
rvct 4.1 was complaining about vstmia.16, store multiple expects 64 data type.
optimized the implementation.
Change-Id: I0701052cabd685c375637bbc3796ff6d88f5972c
The compiler produces better assembly when using int_mv
for assignments. The compiler shifts and ors the two 16bit
values when assigning MV.
Change-Id: I52ce4bc2bfbfaf3f1151204b2f21e1e0654f960f
global values were being referenced, but the GOT was not being set up.
as the GOT is only required for PIC, this issue wasn't caught in the
default configuration.
Change-Id: I8006e53776139362a76f2c80cf9d0f8458602b2f
http://code.google.com/p/webm/issues/detail?id=328
The existing emulation of posix semaphores on Windows uses SetEvent()
and WaitForSingleObject(), which implements a binary semaphore, not a
counting semaphore as implemented by posix. This causes deadlock when
used with the expected posix semantics. Instead, this patch uses the
CreateSemaphore() and ReleaseSemaphore() calls (introduced in Windows
2000) which have the expected behavior.
This patch also reverts commit eb16f00, which split a semaphore that
was being used with counting semantics into two binary semaphores.
That commit is unnecessary with corrected emulation.
Change-Id: If400771536a27af4b0c3a31aa4c4e9ced89ce6a0
Renamed configure option "enable-psnr" to "enable-internal-stats" to
better reflect the purpose of the option and eliminate the confusion
reported in http://code.google.com/p/webm/issues/detail?id=35
Change-Id: If72df6fdb9f1e33dab1329240ba4d8911d2f1f7a
the decision to run the regular or simple loopfilter is made outside the
function and managed with pointers
stop tracking the option in two places. use filter_type exclusively
Change-Id: I39d7b5d1352885efc632c0a94aaf56b72cc2fe15
The dc_diff flag is used to skip loopfiltering. Instead
of setting this flag in the decoder/encoder, we now check
for this condition in the loopfilter.
Change-Id: Ie2b9cdf9e0f4e8b932bbd36e0878c05bffd28931
Code cleanup. The build inter predictor functions are
redundantly checking the mode_info_context for either
INTRA_FRAME or SPLITMV.
Change-Id: I4d58c3a5192a4c2cec5c24ab1caf608bf13aebfb
Golden and ALT reference buffers were refreshed by copying from
the new buffer. Replaced this by index manipulation.
Also moved all the reference frame updates to one function for
easier tracking.
Change-Id: Icd3e534e7e2c8c5567168d222e6a64a96aae24a1
the win64 abi requires saving and restoring xmm6:xmm15. currently
SAVE_XMM and RESTORE XMM only allow for saving xmm6:xmm7. allow
specifying the highest register used and if the stack is unaligned.
Change-Id: Ica5699622ffe3346d3a486f48eef0206c51cf867
Went through the code and fixed it. Verified on Windows.
Where possible, remove dependencies on xmm[67]
Current code relies on pushing rbp to the stack to get 16 byte
alignment. This broke when rbp wasn't pushed
(vp8/encoder/x86/sad_sse3.asm). Work around this by using unaligned
memory accesses. Revisit this and the offsets in
vp8/encoder/x86/sad_sse3.asm in another change to SAVE_XMM.
Change-Id: I5f940994d3ebfd977c3d68446cef20fd78b07877
This is reported by m...@hesotech.de (see issue 312):
"The decoder causes an access violation
when you decode the first frame, then make a pause of about
60 seconds and then decode further frames. But only if
vpx_codec_dec_cfg_t.threads> 1.
This is caused by a timeout of WaitForSingleObject.
When I change the definition of VPXINFINITE to INFINITE(0xFFFFFFFF),
the problem is solved."
Reproduced the crash and verified the changes on Windows platform.
This brings the behavior inline with the other platforms using sem_wait().
Change-Id: I27b32f90bce05846ef2684b50f7a88f292299da1
vp8_filter_block1d16_h4_ssse3 was never called
because UNSHADOW_ARGS moves the stack by 'mov rsp, rbp', the issue was
masked. however, if/when win64 used those registers for persistant data,
issues could/will arise.
Change-Id: I56d6effca0aeba1f86082689771cb10145d39651
This patch cleans up the source buffer storage and copy mechanism to
allow access through a standard push/pop/peek interface. This approach
also avoids an extra copy in the case where the source is not a
multiple of 16, fixing issue #102.
Change-Id: I05808c39f5743625cb4c7af54cc841b9b10fdbd9
This patch changes the rc_undershoot_pct and rc_overshoot_pct controls
to set the "aggressiveness" of rate adaptation, by limiting the
amount of difference between the target buffer level and the actual
buffer level which is applied to the target frame rate for this frame.
This patch was initially provided by arosenberg at logitech.com as
an attachment to issue #270. It was modified to separate these controls
from the other unrelated modifications in that patch, as well as to
use the pre-existing variables rather than introducing new ones.
Change-Id: Id542e3f5667dd92d857d5eabf29878f2fd730a62
MV sad cost error is only used in full-pixel motion search,
which only need full-pixel resolution instead of quarter-pixel
resolution. This change reduced mvsadcost table size, and
removed unneccessary pamameter passing since this table is
constant once it is generated.
Change-Id: I9f931e55f6abc3c99011321f1dfb2f3562e6f6b0
Detect the number of available cores and limit the thread allocation
accordingly. On decoder side limit the number of threads to the max
number of token partition.
Core detetction works on Windows and
Posix platforms, which define _SC_NPROCESSORS_ONLN or _SC_NPROC_ONLN.
Change-Id: I76cbe37c18d3b8035e508b7a1795577674efc078
A large number of functions were defined with external linkage, even
though they were only used from within one file. This patch changes
their linkage to static and removes the vp8_ prefix from their names,
which should make it more obvious to the reader that the function is
contained within the current translation unit. Functions that were
not referenced were removed.
These symbols were identified by:
$ nm -A libvpx.a | sort -k3 | uniq -c -f2 | grep ' [A-Z] ' \
| sort | grep '^ *1 '
Change-Id: I59609f58ab65312012c047036ae1e0634f795779
Fixes implicit declaration warning for 'mach_task_self'. This change
is an update to Change I9991dedd1ccfddc092eca86705ecbc3b764b799d,
which fixed this issue for the decoder but not the encoder.
Change-Id: I9df033e81f9520c4f975b7a7cf6c643d12e87c96
The vp8_build_intra_predictors_mby and vp8_build_intra_predictors_mby_s
functions had global function pointers rather than using the RTCD
framework. This can show up as a potential data race with tools such as
helgrind. See https://bugzilla.mozilla.org/show_bug.cgi?id=640935
for an example.
Change-Id: I29c407f828ac2bddfc039f852f138de5de888534
make reference version of bilinear_filters short.
use reference versions of bilinear_filters and sub_pel_filters when
possible.
recognize that Width was being passed into
filter_block2d_bil_first_pass multiple times. ARM version had already
fixed this. propegate to C.
change references to src_pixels_per_line to src_pitch and standardize on
src/dst (instead of input/output).
recognize that first_pass is only run in the verticle and second_pass
only horizontal. ARM version had already fixed this. propegate to C
Change-Id: I292d376d239a9a7ca37ec2bf03cc0720606983e2
it's difficult to mux the *_offsets.c files because of header conflicts.
make three instead, name them consistently and partititon the contents
to allow building them as required.
Change-Id: I8f9768c09279f934f44b6c5b0ec363f7943bb796
common/arm/vpx_asm_offsets moves up a level. prepare for muxing with
encoder/arm/vpx_vp8_enc_asm_offsets
Change-Id: I89a04a5235447e66571995c9d9b4b6edcb038e24
Adds following targets to configure script to support RVCT compilation
without operating system support (for Profiler or bare metal images).
- armv5te-none-rvct
- armv6-none-rvct
- armv7-none-rvct
To strip OS specific parts from the code "os_support"-config was added
to script and CONFIG_OS_SUPPORT flag is used in the code to exclude OS
specific parts such as OS specific includes and function calls for
timers and threads etc. This was done to enable RVCT compilation for
profiling purposes or running the image on bare metal target with
Lauterbach.
Removed separate AREA directives for READONLY data in armv6 and neon
assembly files to fix the RVCT compilation. Otherwise
"ldr <reg>, =label" syntax would have been needed to prevent linker
errors. This syntax is not supported by older gnu assemblers.
Change-Id: I14f4c68529e8c27397502fbc3010a54e505ddb43
Prior to this change, VP8 min quantizer is 4, which caps the
highest quality around 51DB. This experimental change extends
the min quantizer to 1, removes the cap and allows the highest
quality to be around ~73DB, consistent with the fdct/idct round trip
error. To test this change, at configure time use options:
--enable-experimental --enable-extend_qrange
The following is a brief log of changes in each of the patch sets
patch set 1:
In this commit, the quantization/dequantization constants are kept
unchanged, instead scaling factor 4 is rolled into fdct/idct.
Fixed Q0 encoding tests on mobile:
Before: 9560.567kbps Overall PSNR:50.255DB VPXSSIM:98.288
Now: 18035.774kbps Overall PSNR:73.022DB VPXSSIM:99.991
patch set 2:
regenerated dc/ac quantizer lookup tables based on the scaling
factor rolled in the fdct/idct. Also slightly extended the range
towards the high quantizer end.
patch set 3:
slightly tweaked the quantizer tables and generated bits_per_mb
table based on Paul's suggestions.
patch set 4:
fix a typo in idct, re-calculated tables relating active max Q
to active min Q
patch set 5:
added rdmult lookup table based on Q
patch set 6:
fix rdmult scale: dct coefficient has scaled up by 4
patch set 7:
make transform coefficients to be within 16bits
patch set 8:
normalize 2nd order quantizers
patch set 9:
fix mis-spellings
patch set 10:
change the configure script and macros to allow experimental code
to be enabled at configure time with --enable-extend_qrange
patch set 11:
rebase for merge
Change-Id: Ib50641ddd44aba2a52ed890222c309faa31cc59c
A new vpx_codec_control called VP8D_GET_FRAME_CORRUPTED. The output
from the function is non-zero if the last decoded frame contains
corruption due to packet losses.
The decoder is also modified to accept encoded frames of zero length.
A zero length frame indicates to the decoder that one or more frames
have been completely lost. This will mark the last decoded reference
buffer as corrupted. The data pointer can be NULL if the length is
zero.
Change-Id: Ic5902c785a281c6e05329deea958554b7a6c75ce
The merge includes hooks to for CQ mode and other code
changes merged from the test branch.
CQ mode attempts to maintain a more stable quantizer within a clip
whilst also trying to adhere to a guidline maximum bitrate.
The existing target data rate parameter is used to specify the
guideline maximum bitrate.
A new parameter allows the user to specify a target CQ level.
For normal (non kf/gf/arf) frames, the quantizer will not drop BELOW the
user specified value (0-63). However, in some cases the encoder may
choose to impose a target CQ that is above that specified by the user,
if it estimates that consistent use of the target value is not compatible
with guideline maximum bitrate.
Change-Id: I2221f9eecae8cc3c431d36caf83503941b25e4c1
Scott pointed out that last_frame_type only gets updated while
loopfilter exists. Since last_frame_type is also needed in
motion search now, it needs to be updated every frame.
Change-Id: I9203532fd67361588d4024628d9ddb8e391ad912
Add a new encoder control, VP8E_SET_TUNING, to allow the application
to inform the encoder that the material will benefit from certain
tuning. Expose this control as the --tune option to vpxenc. The args
helper is expanded to support enumerated arguments by name or value.
Two tunings are provided by this patch, PSNR (default) and SSIM.
Activity masking is made dependent on setting --tune=ssim, as the
current implementation hurts speed (10%) and PSNR (2.7% avg,
10% peak) too much for it to be a default yet.
Change-Id: I110d969381c4805347ff5a0ffaf1a14ca1965257
Per John's previous change, shrink TOKENEXTRA from 20 to 8 bytes
original: b7b1e6fb
reverted: 41f4458a
Also drop unused field from vp8_extra_bit_struct
Update ARM ASM to deal with this change. In particular, Extra is signed
and needs to be sign-extended when loaded.
Change-Id: Ibd0ddc058432bc7bb09222d6ce4ef77e93a30b41
This code is unused, as the current preproc implementation uses the
same spatial filter that postproc uses.
Change-Id: Ia06d5664917d67283f279e2480016bebed602ea7
Changed the end of block computation to use pmaxw. Removed
additional pushing and popping of registers that was not needed.
Change-Id: I08cb9b424513cd8a2c7ad8cea53b4e2adc66ef98
In the process of developing new intra prediction modes, tests have
shown removal of the low pass filtering from B_HE_PRED and B_VE_PRED
has an overall minor positive impact in both PSNR and SSIM metric.
Overall difference is about 0.1%. The change shall also have a small
positive impact on speed. Intuitively, this change should also reduce
some of the tendency of "flattening"
Change-Id: I3c43b0daca833c6eff77d00f19c811f9ef9368a3
Extending the value range of tokens allows further experiments on
extending quantizer range. Encoder and decoder were verified to
produce matching reconstructed buffers by tests with forced
quantized value of 1.
Change-Id: I12faf92832867870b6f71ddeafbf643f1040086d
- Used three probability approach for temporal context as follows:
P0 - probability of no change if both above and left not changed
P1 - probability of no change if one of above and left has changed
P2 - probability of no change if both above and left have changed
In addition, a 1 bit/frame has been used to decide whether to use temporal context or to encode directly. The cost of using both the schemes is calculated ahead and the temporal_update flag is set if the cost of using temporal context is lower than encoding the segment ids directly.
This approach has given around 20% reduction in cost of bits needed to encode segmentation ids.
Change-Id: I44a5509599eded215ae5be9554314280d3d35405
Debugging in postproc needs more flags to allow for specific
block types to be turned on or off in the visualizations.
Must be enabled with --enable-postproc-visualizer during
configuration time.
Change-Id: Ia74f357ddc3ad4fb8082afd3a64f62384e4fcb2d
Change color reference frame to blend the macro block edge.
This helps with layering of visualizations.
Add block coloring for intra prediction modes.
Change-Id: Icefe0e189e26719cd6937cebd6727efac0b4d278
Split motion vectors were all being treated as 4x4
blocks. Now correctly handle 16x8, 8x16, 8x8, 4x4
blocks.
Change-Id: Icf345c5e69b5e374e12456877ed7c41213ad88cc
Now draw 16 vectors for SPLITMV mode.
Fixed constrain line to block divide by zero issues.
Blend block was not centering the shaded area correctly.
Change-Id: I1edabd8b4e553aac8d980f7b45c80159e9202434
This eliminates a large set of warnings exposed by the Mozilla build
system (Use of C++ comments in ISO C90 source, commas at the end of
enum lists, a couple incomplete initializers, and signed/unsigned
comparisons).
It also eliminates many (but not all) of the warnings expose by newer
GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite
without checking the return values).
There are a few spurious warnings left on my system:
../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used
uninitialized in this function
gcc seems to be unable to figure out that the value shortcut doesn't
change between the two if blocks that test it here.
../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned
expression >= 0 is always true
../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned
expression >= 0 is always true
This is true, so far as it goes, but it's comparing against an enum, and the C
standard does not mandate that enums be unsigned, so the checks can't be
removed.
Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
Turned down the blending level to make colored blocks obscure
the video less.
Not blending the entire block to give distinction to macro
block edges.
Added configuration so that macro block blending function can
be optimized.
Change to constrain line as to when dx and dy are computed.
Now draw two lines to form an arrow.
Change-Id: Id3ef0fdeeab2949a6664b2c63e2a3e1a89503f6c
This allows multiple post processor debug levels to be overlayed.
i.e. can show colored reference blocks and visual motion vectors.
Change-Id: Ic4a1df438445b9f5780fe73adb3126e803472e53
Post process option to color the block for either the mode
of the macro block, or the frame that the macro block references.
Change-Id: Ie498175497f2d20e3319924d352dc4ddc16f4134
ARM NEON has a platform specific version of vp8_recon16x16mb, though
it's just a stub to extract the various parameters from the
MACROBLOCKD struct and pass them to vp8_recon16x16mb_neon(). Using
that function's prototype directly will be a better long term solution,
but it's quite an invasive change.
Change-Id: I04273149e2ade34749e2d09e7edb0c396e1dd620
Some of the ARM functions differed from their generic counterparts
only by unrolling their loops. Since this change may be useful
on other platforms, or might even supercede the looped version
in the generic case, move it back to the generic file.
This code is left under #if ARCH_ARM for now, but it may be worth
considering a different (possibly new) conditional for these. If
it turns out that this should be runtime selectable, these
functions will have to move to the RTCD infrastructure. Don't want
to take that step at this time without more profile data.
Change-Id: I4612fdbc606fbebba4971a690fb743ad184ff15f
These functions were true duplicates of functions present in the
generic code. This fixes some of the link errors when building
with --enable-shared --enable-pic.
Change-Id: Idff26599d510d954e439207883607ad6b74df20c
Postproc level that uses Bresenham's line algorithm
to draw motion vectors onto the postproc buffer.
Change-Id: I34c7daa324f2bdfee71e84fcb1c50b90fa06f6fb
there were four versions for the regular and
macroblock loopfilters:
horizontal [y|uv]
vertical [y|uv]
this moves all the common code into 2 functions:
vp8_loop_filter_neon
vp8_mbloop_filter_neon
this provides no gain in performance. there's a bit
of jitter, but it trends down ~0.25-0.5%. however,
this is a huge gain maintenance. also, there is the
potential to drop some stack usage in the macroblock
loopfilter.
Change-Id: I91506f07d2f449631ff67ad6f1b3f3be63b81a92
The primary goal is to allow a binary to be built which supports
NEON, but can fall back to non-NEON routines, since some Android
devices do not have NEON, even if they are otherwise ARMv7 (e.g.,
Tegra).
The configure-generated flags HAVE_ARMV7, etc., are used to decide
which versions of each function to build, and when
CONFIG_RUNTIME_CPU_DETECT is enabled, the correct version is chosen
at run time.
In order for this to work, the CFLAGS must be set to something
appropriate (e.g., without -mfpu=neon for ARMv7, and with
appropriate -march and -mcpu for even earlier configurations), or
the native C code will not be able to run.
The ASFLAGS must remain set for the most advanced instruction set
required at build time, since the ARM assembler will refuse to emit
them otherwise.
I have not attempted to make any changes to configure to do this
automatically.
Doing so will probably require the addition of new configure options.
Many of the hooks for RTCD on ARM were already there, but a lot of
the code had bit-rotted, and a good deal of the ARM-specific code
is not integrated into the RTCD structs at all.
I did not try to resolve the latter, merely to add the minimal amount
of protection around them to allow RTCD to work.
Those functions that were called based on an ifdef at the calling
site were expanded to check the RTCD flags at that site, but they
should be added to an RTCD struct somewhere in the future.
The functions invoked with global function pointers still are, but
these should be moved into an RTCD struct for thread safety (I
believe every platform currently supported has atomic pointer
stores, but this is not guaranteed).
The encoder's boolhuff functions did not even have _c and armv7
suffixes, and the correct version was resolved at link time.
The token packing functions did have appropriate suffixes, but the
version was selected with a define, with no associated RTCD struct.
However, for both of these, the only armv7 instruction they actually
used was rbit, and this was completely superfluous, so I reworked
them to avoid it.
The only non-ARMv4 instruction remaining in them is clz, which is
ARMv5 (not even ARMv5TE is required).
Considering that there are no ARM-specific configs which are not at
least ARMv5TE, I did not try to detect these at runtime, and simply
enable them for ARMv5 and above.
Finally, the NEON register saving code was completely non-reentrant,
since it saved the registers to a global, static variable.
I moved the storage for this onto the stack.
A single binary built with this code was tested on an ARM11 (ARMv6)
and a Cortex A8 (ARMv7 w/NEON), for both the encoder and decoder,
and produced identical output, while using the correct accelerated
functions on each.
I did not test on any earlier processors.
Change-Id: I45cbd63a614f4554c3b325c45d46c0806f009eaa
Most of the code that actually uses these matrices indexes them as
if they were a single contiguous array, and coverity produces
reports about the resulting accesses that overflow the static
bounds of the first row.
This is perfectly legal in C, but converting them to actual [16]
arrays should eliminate the report, and removes a good deal of
extraneous indexing and address operators from the code.
Change-Id: Ibda479e2232b3e51f9edf3b355b8640520fdbf23
../libvpx/vp8/encoder/bitstream.c: In function ‘pack_inter_mode_mvs’:
../libvpx/vp8/encoder/bitstream.c:1026: warning: array subscript has type ‘char’
Change-Id: Ic77491e0a172fa1821e5b3e914d0dc41fe87c00f
Filed for nasm as:
https://sourceforge.net/tracker/?func=detail&atid=106208&aid=3081103&group_id=6208
nasm just does not accept any size parameter for movhps:
1.asm:2: error: mismatch in operand sizes
Some parts of libvpx already use MMWORD for movhps and MMWORD is
defined-out so it is compatible both with yasm and nasm.
Provide nasm compatibility. No binary change by this patch with yasm on
{x86_64,i686}-fedora13-linux-gnu.
Change-Id: I4008a317ca87ec07c9ada958fcdc10a0cb589bbc
nasm does not support `label wrt rip', it requires `rel label'. It is
still fully compatible with yasm.
Provide nasm compatibility. No binary change by this patch with yasm on
{x86_64,i686}-fedora13-linux-gnu. Few longer opcodes with nasm on
{x86_64,i686}-fedora13-linux-gnu have been checked as safe.
Change-Id: I488773a4e930a56e43b0cc72d867ee5291215f50
nasm requires the instruction length (movd/movq) to match to its
parameters. I find it more clear to really use 64bit instructions when
we use 64bit registers in the assembly.
Provide nasm compatibility. No binary change by this patch with yasm on
{x86_64,i686}-fedora13-linux-gnu. Few longer opcodes with nasm on
{x86_64,i686}-fedora13-linux-gnu have been checked as safe.
Change-Id: Id9b1a5cdfb1bc05697e523c317a296df43d42a91
Raised by Lei Yang, the Y plane stride was used for UV blocks.
This is clearly a typo. But as the comments in the code suggested
that this port of code has not been used yet, so the typo should
not have created any damage yet.
Change-Id: Iea895edc17469a51c803a8cc6d0fce65a1a7fc2f
Loopfilter deltas are initialized to zero on keyframes in the decoder.
The values then persist from the previous frame unless an update bit
is set in the bitstream. This data is not included in the entropy
data saved by the 'refresh entropy' bit in the bitstream, so it is
effectively an additional contextual element beyond the 3 ref-frames
and the entropy data.
The encoder was treating this delta update bit as update-if-nonzero,
meaning that the value would be refreshed even if it hadn't changed,
and more significantly, if the correct value for the delta changed
to zero, the update wouldn't be sent, and the decoder would preserve
the last (presumably non-zero) value.
This patch updates the encoder to send an update only if the value
has changed from the previously transmitted value. It also forces the
value to be transmitted in error resilient mode, to account for lost
context in the event of lost frames.
Change-Id: I56671d5b42965d0166ac226765dbfce3e5301868
- Scheduling for Atom processors
- Combining of macros to allow for better interleaving
- Change from multiplies to adds for main filter
- Use of movhps/movlps to fill xmm registers without
shifting and orring
Change-Id: I0b3500a5f58abf7085253ec92d64c8a96723040b
The existing code applied a 6-tap filter with 0's on either end.
We're already paying the branch penalty to avoid computing the two
extra columns needed as input to this filter.
We might as well save time computing the filter as well.
This reduces the inner loop from 21 instructions to 16, the number
of loads per iteration from 4 to 1, and the number of multiplies
from 7 to 4.
The gain in overall decoding performance, however, is small (less
than 1%).
This change also means we now valgrind clean on ARMv6, which is
its real purpose.
The errors reported here were valgrind's fault (it does not detect
that 0 times an uninitialized value is initialized), but Julian
Seward says it would slow down valgrind considerably to make such
checks.
Speeding up libvpx rather, even by a small amount, seems a much
better idea if only to enable proper valgrind checking of the
rest of the codec.
Change-Id: Ifb376ea195e086b60f61daf1097d8910c4d8ff16
This function was accessing values below the stack pointer, which
can be corrupted by signal delivery at any time.
Change-Id: I92945b30817562eb0340f289e74c108da72aeaca
previous implementation compared each set of values to limit and then
&'d them together, requiring a compare and & for each value.
this does the accumulation first, requiring only one compare
Change-Id: Ia5e3a1a50e47699c88470b8c41964f92a0dc1323
reconintra_mt.c is only required for building the decoder right now.
It could definitely be used for the encoder in the future, but it
currently depends on decoder only data structures. (onyxd_int.h,
VP8D_COMP, etc). Move it from common/ to decoder/ until the
necessary changes to the common multithread code are complete.
This patch is needed to build with --disable-vp8-decoder.
Change-Id: I568c52221a2b309234d269675cba97131ce35c86
Movdqu is more expensive (throughput, uops) than movq. Minimal
impact for newer big cores, but ~2.25% gain on Atom.
Change-Id: I62c80bb1cc01d8a91c350c4c7719462809a4ef7f
Use pmaxub instead of a combination of psubusb/por to
determine if any comparisons go over the limit.
Change-Id: I3f0bd7d2aabe5fee9ba6620508e2b60605abcb82
On each MB, loopfiltering is done right after MB decoding. This
combines two loops in multi-threaded code into one, which reduces
number of synchronizations to half.
The above-row/left-col data are saved in temp buffers for
next-row/next MB decoding.
Tests on 4-core gLucid machine showed 10% decoder performance
gain with threads=4 (tulip clip). Testing on other platforms
isn't done yet.
Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
There is no need to make sure that the lower byte of the
register is 0 because the downshift by 11 overwrites that byte.
Change-Id: I89cbf004b2ff532a2c68e0dc399c45a49cdad5a1
-Updates by making use of spatial correlation.
-Checks if the segment_id is same as above or left context and encodes only the update to the map instead of updating individual segment_ids.
Change-Id: Ib861df97e8aa2b37516219eeddcdbaf552b6a249
Sequentially accessing memory from a low address to a high
address should make it easier for the processor to predict
the cache.
Change-Id: I1921ce996bdd547144fe864fea6435f527f5842d
Changes 'The VP8 project' to 'The WebM project', for consistency
with other webmproject.org repositories.
Fixes issue #97.
Change-Id: I37c13ed5fbdb9d334ceef71c6350e9febed9bbba
Moved partition_bmi and partition_count out of MB_MODE_INFO and
placed into MACROBLOCK. Also reduced the size of other members
of the MB_MODE_INFO struct. For 1080p, the memory was reduced
by 1,209,516 bytes. The decoder performance appeared to improve
by 3% for the clip used.
Note: The main goal for this change is to improve the decoder
performance. The encoder will be revisited at a later date for
further structure cleanup.
Change-Id: I4733621292ee9cc3fffa4046cb3fd4d99bd14613
Remove the dependency on postproc.c for the encoder in general, the only
unchecked need for it is when CONFIG_PSNR is enabled. All other cases
are already wrapped in CONFIG_POSTPROC. In the CONFIG_PSNR case the file
will still be included.
Additionally, when VP8_SET_POSTPROC is used with the encoder when post
processing has been disabled an error will be returned.
This addresses issue #153.
Change-Id: Ia6dfe20167f7077734a6058cbd1d794550346089
The main reason for the change was to reduce cycles in the token
decoder. (~1.5% gain for 32 bit) This layout should be more
cache friendly.
As a result of this change, the encoder had to be updated.
Change-Id: Id5e804169d8889da0378b3a519ac04dabd28c837
Note: dixie uses a similar layout
The memory being zeroed in vp8_update_mode_info_border() was just
allocated with calloc, and so the entire function is actually
redundant, but it should be made correct in case someone expects
it to actually work in the future.
Change-Id: If7a84e489157ab34ab77ec6e2fe034fb71cf8c79
Moving the eob structure allows for a non-struct based
function to handle decoding an entire mb of
idct/dequant/recon data. This allows for SIMD functions
to idct/dequant/recon multiple blocks at once.
SSE2 implementation gives 3% gain on Atom.
Change-Id: I8a8f3efd546ea4e0535f517d94f347cfb737c9c2
move some things around, reorder some instructions
constant 0 is used several times. load it once per call in horiz,
once per loop in vert.
separate saturating instructions to avoid stalls.
just use one usub8 call to set GE flags, rather than uqsub8 followed by
usub8 w/ 0
document some stalls for further consideration
Change-Id: Ic3877e0ddbe314bb8a17fd5db73501a7d64570ec
test cases were causing a crash because the count was being read
incorrectly. after fixing that, noticed that the output was not
matching. fixed that.
Change-Id: Idb0edb887736bd566a3cf6d4aa1a03ea8d20eb27
