This minor tweak makes segment 0 neutral and used by
key frames and also extends beyond 4 segments.
Change-Id: Ife4744602aba66ac9432746db3113cc5cd88a482
Also some further simplification following removal
of top node code.
There is an issue in regards to the shared file vp8cx.h
in regard to the roi_map as this interface assumes that
there are only 4 segments. I have left the value here as
4 for now meaning that the roi_map interface is broken
for VP9.
Note that this change would have been easier if I hadn't
had to search for hard wire instances of the number 4
and <= 3.
Change-Id: Ia8b6deea4be4dbd20deb1656e689dd43a5f190e8
Remove top node optimization.
The improvement this gives is not sufficient to justify
the extra complexity.
Change-Id: I2bb4a12a50ffd52cacfa4a3e8acbb2e522066905
Quantizers can vary per plane, but not per block. Move these values to
the per-plane part of MACROBLOCK.
Change-Id: I320a55e38b7b28b29aec751a4aca5ccd0c9b9326
This commit moves the coeff storage from the MACROBLOCK struct to its
per-plane part. The next commit will remove the coeff member from the
BLOCK structure so that it is consistently accessed per-plane.
Also refactors vp9_sb_block_error_c and vp9_sb_uv_block_error_c to be
variable subsampling aware.
Change-Id: I18c30f87f27c3a012119b6c1970d5fa499804455
This commit enables rectangular block prediction of compound
inter-intra mode. It combines the mb/sb32/sb64 prediction functions
into a unified version with configurable block width and height.
This fixes the enc/dec mismatch of the codebase when
comp-interintra-pred is enabled.
Change-Id: I1d0db2f1f184007802df04fcd12b9dadb3189ff0
Clean Windows build warnings:
warning C4028: formal parameter <N> different from declaration
This was fixed independently in master and experimental but the fixes
were in opposite directions. One added const to the declaration and the
other removed it from the implementation.
Also update the variable names. This doesn't modify the data so call it
ref, matching the functions in the vicinity, rather than dst.
Change-Id: I2ffc6b4a874cb98c26487b909d20a5e099b5582c
Fix warning on windows: signed/unsigned mismatch on lines 415, 454
Comparison was between size_t data_sz >= int index_sz on 415 and
unsigned int data_sz >= int index_sz on 454. Both might be changed to
size_t but that would be tracing and replacing all comparisons is
outside the scope of this change.
In the rest of these two functions ensure unsigned values are used
consistently.
Change-Id: I922b399ceca612a92f44b9d1d331c1c6bae9d768
Also use explicitely named enum values in sb_type comparisons, rather
than relying on absolute integer values, because enum values may
change in the future.
Change-Id: I72d42971a98157af93413a25ac2c7e6f9b369cec
First in a series of commits making certain MACROBLOCK members
addressable per-plane. This commit also refactors the block subtraction
functions vp9_subtract_b, vp9_subtract_sby_c, etc to be
loops-over-planes and variable subsampling aware.
Change-Id: I371d092b914ae0a495dfd852ea1a3d2467be6ec3
This version of speed 1 only disables modes at higher resolution that
had distortions >2x the best mode we found...
The hope is that this could be a replacement for speed 0 ...
Change-Id: I7421f1016b8958314469da84c4dccddf25390720
Mostly for cleanup purposes. Now we should be able to rework
the encoder/decoder to use a common idct/add function.
Change-Id: I1597cc59812f362ecec0a3493b6101a6cc6fa7ff
This fixes an intermittent mismatch issue cause by moving
the lossless mode decoding bit to after the loop filter
setup information. We need to ensure that the lossless bit
is decoded prior to loop filter setup.
Change-Id: I3faa3fff8e1013b7405dac91268350e059ed121e
Adds an experiment that codes an end-of-orientation symbol
for every eligible zero encountered in scan order.
This cleans out various other sub-experiments that were part
of the origiinal patch, which will be later included if found
useful.
Results are slightly positive on all sets (0.1 - 0.2% range).
Change-Id: I57765c605fefc7fb9d1b57f1b356843602abefaf
Removes the redundant dst pointers from vp9_build_inter_predictors_sb{y,uv}
and the remaining mb specific functions.
Change-Id: I7b6bf439d9394b85ea79b4fe61a3ffc1025720da
Wherever there are real pixels available before falling back to use
assumed values 127 and 129.
This also make DC_PRED for i4x4 consistent with DC_PRED for larger
blocks.
Change-Id: I54372924826118da023f402c802ac6ce0caa70c3
First in a series of commits moving the framebuffers pointers to
per-plane data, so that they can be indexed numerically rather than
by name.
Change-Id: I6e0d60fd4d51e6375c384eb7321776564df21775
For 1080 material, this buffer is currently 2,270,928 bytes. This patch swaps
ptrs instead of copying and uses the last show_frame flag instead of setting
the entire buffer to zero. For the test clip used, the decoder improved by up
to 1%.
Change-Id: I686825712ad56043e09ada9808dc489f875a6ce0
Remove the unnecessary _s_ from their names, and add a new
vp9_recon_sb() that calls the y and uv variants.
Change-Id: I7ffaa5ff5605a8472cac2a53de8cf889353039a6
Similar to the prior change that removed the rounding from non-SPLITMV
modes. Improves quality by a similar amount (Additional +0.087% on derf)
Change-Id: I39d80b4a3037a3aa7e285eb2320346ddaf646f52
Further simplification of mvref search to return
only the top two candidates. Distance weights removed
as the test order reflects distance anyway.
Change-Id: I0518cab7280258fec2058670add4f853fab7b855
As we are no longer able to sort the candidate
mvrefs in both encoder and decode and given
that the cost of explicit signalling has proved
prohibitive, it no longer makes sense to find more
than 2 candidates.
This patch:
Modifies and simplifies add_candidate_mv()
Removes the forced addition of a 0 vector in the
MAX_MV_REF_CANDIDATES-1 position (in preparation
to reducing MAX_MV_REF_CANDIDATES to 2).
Re-orders the addition of candidates slightly.
This actually gives small gains (circa 0.2% on std-hd)
A subsequent patch will remove NEW_MVREF experiment,
reduce MAX_MV_REF_CANDIDATES to 2 and remove distance
weights as these are implicit now in the order.
Change-Id: I3dbe1a6f8a1a18b3c108257069c22a1141a207a4
Adjustments take heavier account of the frame near a kf
in deciding boost and limit the total number that can contribute.
Also adjusted the minq calculations such that in most cases we
generate a smaller key frame.
Modified the code that accounts for how static the sequence is and
added some adjustment based on image size. This is still very
crude but smaller images tend to behave better with a larger
delta between KF Q and other frames than larger image formats.
Changes give sizable gains in overall PSNR on all the test sets but the
biggest gains (~3%) were on the std-hd set.
The gains were smaller for SSIM but still significant.
Average PSNR results are mixed because this metric can very easily
be altered by having a very good / lossless coding of one or two frames.
Some of the YT and YT-HD clips in particular have blank lead ins and
allowing lossless coding of these appears to make a big difference to
average PSNR but it reality does not help much at all.
Change-Id: I6bfe485a1d330b47c783832f1717c95c535464ec
Consider the previous behavior for the MV 1 3/8 (11/8 pel). In the
existing code, the fractional part of the MV is considered separately,
and rounded is applied, giving a result of 6/8. Rounding is not required
in this case, as we're increasing the precision from a q3 to a q4, and
the correct value 11/16 can be represented exactly.
Slight gain observed (+.033 average on derf)
Change-Id: I320e160e8b12f1dd66aa0ce7966b5088870fe9f8
This commit converts the luma versions of vp9_build_inter_predictors_sb
to use a common function. Update the convolution functions to support
block sizes larger than 16x16, and add a foreach_predicted_block walker.
Next step will be to calculate the UV motion vector and implement SBUV,
then fold in vp9_build_inter16x16_predictors_mb and SPLITMV.
At the 16x16, 32x32, and 64x64 levels implemented in this commit, each
plane is predicted with only a single call to vp9_build_inter_predictor.
This is not yet called for SPLITMV. If the notion of SPLITMV/I8X8/I4X4
goes away, then the prediction block walker can go away, since we'll
always predict the whole bsize in a single step. Implemented using a
block walker at this stage for SPLITMV, as a 4x4 "prediction block size"
within the BLOCK_SIZE_MB16X16 macroblock. It would also support other
rectangular sizes too, if the blocks smaller than 16x16 remain
implemented as a SPLITMV-like thing. Just using 4x4 for now.
There's also a potential to combine with the foreach_transformed_block
walker if the logic for calculating the size of the subsampled
transform is made more straightforward, perhaps as a consequence of
supporing smaller macroblocks than 16x16. Will watch what happens there.
Change-Id: Iddd9973398542216601b630c628b9b7fdee33fe2
Use in-place buffers (dst of MACROBLOCKD) for macroblock prediction.
This makes the macroblock buffer handling consistent with those of
superblock. Remove predictor buffer MACROBLOCKD.
Change-Id: Id1bcd898961097b1e6230c10f0130753a59fc6df
Updates the common convoloution code to support blocks larger than
16x16, and rectangular blocks. This uncovered a bug in the SSSE3
filtering routines due to the order of application of saturation.
This commit fixes that bug, adjusts the unit test to bias its
random values towards the extremes, and adds a test to ensure that
all filters conform to the expected pairwise addition structure.
Change-Id: I81f69668b1de0de5a8ed43f0643845641525c8f0
Moving all the probability updates after frame context selection.
This makes it clean and simple to store all the probs in single
struct that can be sent to hardware codec.
Change-Id: I2ec3de81adbd468d8ef34a914caae80a18c3ef56
List of moved functions: vp9_decode_uniform, vp9_decode_term_subexp,
vo9_inv_recenter_nonneg, vp9_decode_unsigned_max.
Change-Id: Ib518beb90b791690c5c93de17b8bdbf560033b41
Adds RD integration for 32x16, 16x32, 64x32 and 32x64 rectangular blocks.
Derf almost +0.6%, HD a little over +1.0%, STDHD +1.3%.
Change-Id: Id651fdb6a655fdbb5c47009757e63317acfb88a5
Enable recursive partition information coding from SB64X64 down to
MB16X16. The bit-stream syntax is now supporting rectangular block
sizes. It starts from SB64X64 and recursively describes the partition
type of the current block. If the partition type is PARTITION_NONE,
the block is coded as a single unit; if it is PARTITION_HORZ or
PARTITION_VERT, the block is segmented into two independently coded
rectangular units, with no further partition needed; otherwise, the
block is segmented into 4 square blocks. i.e., PARTITION_SPLIT case,
each can be potentially further partitioned.
Forward adaptive probability modeling is used for the partition
information coding, conditioned on the current block size.
Change-Id: I499365fb547839d555498e3bcc0387d8a3587d87
This function is now called from configures the ARNR
filter so it belongs with the other temporal filter
functions.
Change-Id: I64211875918364b5b8edfb97743e573c6def1663
Normalization of the frame boost value was being done
when it reached the value 1028. The intention was to
keep to a range of 10 bits, so it should have been
clipped above 1023.
Change-Id: I0afdddc1d2eb9e7822ec4578903cbe6ec0b33b91
This flag was added to VP8 to allow a mode where MB-level skipping
was not allowed, saving a bit per mb. It was never used in practice,
and hasn't been tested in VP9, so remove it.
Change-Id: Id450ec6904c6d06c1919508e7efc52d05cde5631
tx_type == DCT_DCT check is an implementation detail of iht_add. Also
adding dequant_add_y function with explicit DCT_DCT check inside.
Change-Id: Ia3cb0225601752cdef0ff6f0acd3a09d9dbd8938
In decoder, the scaling calculation, such as (mv * x_num / x_den),
is fairly time-consuming. In this patch, we check if the scaling
happens or not at frame level, and then decide which function to
call to skip scaling calculation when no scaling is needed. Tests
showed a 3% decoder performance gain.
Change-Id: I270901dd0331048e50368cfd51ce273dd82b8733
This is the first CL with vp9_reader changes. All another macro
definitions will be replaced after.
Change-Id: I1c6bd9c9a612ec1663d484d6adb4fb720af54063
Static threshold results slightly up (+0.1% on derf), probably b/c
we now take the filter (sharp/lowpass) into account for the breakout
decision.
Change-Id: I9f597601da434205142afd05f32690e7ba8fd690
This is work-in-progress, it implements multiple ARF
encoding behind an experimental flag.
It adds the ability to insert multiple ARF frames into a
single ARF group. This patch implements the reordering
of the coded frames, and implements a fixed-length coding
pattern. It applies a fixed quantizer strategy based on
where the frame is in the coding sequence.
Further work to modify the rate control strategy is
ongoing and will be submitted via a set of future patches.
In this first step, each ARF group is recursively
bisected and an ARF frame added at that position in the
sequence. The recursion continues until ARF frames are
within MIN_GF_INTERVAL frames.
The code sits behind the "multiple-arf" experimental
flag ("CONFIG_MULTIPLE_ARF"). The experimental flag
"oneshotq" ("CONFIG_ONESHOTQ") also needs to be enabled
for this patch to work correctly.
Change-Id: Ie473b05ebb43ac473c0cfb659b2b8042823085e2
Combine superblock inter predictors into a unified function that
allows configurable block width and height. The inter predictions
of block sizes smaller than 16x16 are handled differently. To be
continued on merging them later.
Change-Id: I14075959dd5e221f00c205c99ca35c1c31ef728e
To match the order of directional intra prediction modes for larger
blocks, also renamed the i4x4 prediction modes to mirror the larger
variants.
Change-Id: I77cea4d0add6c7758460bf9c7a2fe59aca601f0b
The probabilities derived from these statistics are used in bitstream
writing; therefore, we should only do this when we actually decide to
use macroblock coding (over superblock coding). Derf gains +0.15%.
Change-Id: I196814c070a7c79889590658ce10a6eb07454389
The intra predictor supports configurable block sizes. It can handle
intra prediction down to 4x4 sizes, when enabled in BLOCK_SIZE_TYPE.
Change-Id: I7399ec2512393aa98aadda9813ca0c83e19af854
Rename pick_mb_modes to pick_mb_mode, since it now handles only a
single macroblock. This is consistent with pick_sb_mode handling a
single non-macroblock.
Change-Id: I896fdfa06436b2d8c24d6474718cc74420df6b3b
This patch changes the default with the modecoefprob expt
to use mode-based forward updates with one-node pegged
modeling.
The maximum difference with fully trained tables is now
less that 0.1%.
Change-Id: I06b44322e10c6703f93f3c1d48d973b1136a0618
This patch will use the dest buffer instead of the
predictor buffer. This will allow us in future commits
to remove the extra mem copy that occurs in the dequant
functions when eob == 0. We should also be able to remove
extra params that are passed into the dequant functions.
Change-Id: I7241bc1ab797a430418b1f3a95b5476db7455f6a
More specifically, remove vp9_quantize_mb*, vp9_optimize_mb*,
vp9_inverse_transform_mb* and vp9_transform_mb*. Instead, use the
generic _sb* functions that take a size argument, and call them with
BLOCK_SIZE_MB16X16.
Change-Id: I33024afea95d3a23ffbc1df7da426e4645110f29
With these fixed, the codec produces identical results regardless of
what literal values are used for the enum members in BLOCK_SIZE_*.
Change-Id: I26db8e08019b58ba432af1f0950ebe6b0eb4ad8c
Merge various super_block_yrd and super_block_uvrd versions into one
common function that works for all sizes. Make transform size selection
size-agnostic also. This fixes a slight bug in the intra UV superblock
code where it used the wrong transform size for txsz > 8x8, and stores
the txsz selection for superblocks properly (instead of forgetting it).
Lastly, it removes the trellis search that was done for 16x16 intra
predictors, since trellis is relatively expensive and should thus only
be done after RD mode selection.
Gives basically identical results on derf (+0.009%).
Change-Id: If4485c6f0a0fe4038b3172f7a238477c35a6f8d3
The unified dequantization, inverse transform, and adding functions
support rectangular block sizes. Also separate the operations on
luma and chroma components, in the consideration of the txfm_size
for uv components in rectangular block sizes.
Change-Id: I2a13246b2a9086b37d575d346070990d854cc110
The strategy to run fast loop filter picking for encoder speed-up
should be revisited at a later stage.
Change-Id: I3b75e06d767cff41be952a42e63b3292f4eab996
Merge sb32x32 and sb64x64 functions; allow for rectangular sizes. Code
gives identical encoder results before and after. There are a few
macros for rectangular block sizes under the sbsegment experiment; this
experiment is not yet functional and should not yet be used.
Change-Id: I71f93b5d2a1596e99a6f01f29c3f0a456694d728
Restructure the code to avoid the majority of per-block-size
switches, code duplication, etc. All block types (mb/sb32/sb64)
can be handled by the same code.
Change-Id: I4022718d66e31a15a7074e43f3b98cd0a5124ea7
Removing several commented code blocks, using uint32_t and uint8_t types,
removing redundant code.
Change-Id: Ifc5cc9863897925ea2a7cab4f7309ccf28d80bfe
Clamp only the motion vectors inferred from neighboring reference
macroblocks. The motion vectors obtained through motion search in
NEWMV mode are constrained during the search process, which allows
a relatively larger referencing region than the inferred mvs.
Hence further clamping the best mv provided by the motion search may
affect the efficacy of NEWMV mode.
Synchronized the decoding process. The decoded mvs in NEWMV modes
should be guaranteed to fit in the effective range. Put a mv range
clamping function there for security purpose.
This improves the coding performance of high motion sequences, e.g.,
derf set:
foreman 0.233%
husky 0.175%
icd 0.135%
mother_daughter 0.337%
pamphlet 0.561%
stdhd set:
blue_sky 0.408%
city 0.455%
also saw sunflower goes down by -0.469%.
Change-Id: I3fcbba669e56dab779857a8126a91b926e899cb5