1. block types
There are only three types of blocks for 8x8 transformed MBs, i.e. Y
block with DC does not exist for 8x8 transformed MBs as all MB using
8x8 transform have 2nd order haar transform. This commit introduced
a new macro BLOCK_TYPES_8X8 to reflect such fact.
2. context counters
This commit also fixed the mixed of context_counters between 4x4 and
8x8 transformed MBs. The mixed use of the counters leads me to think
the existing the context probabilities were not properly generated
from 8x8 transformed MBs.
3. redundant collecting in recoding
The commit also corrected the code that accumulates entropy stats by
making sure stats only collected for final packing, not during the
recode loop
Change-Id: I029f09f8f60bd0c3240cc392ff5c6d05435e322c
This commit merge the QI mode experiment. As the experiment affects
the encoding of intra coding modes on key frame only, the overall
effect of the experiment on encoding tests is insignificant.
Change-Id: I9e4e3933adface88867ad429cee3986e529c511d
The commit merges the UVINTRA experiment and removed the related
macros. The overall effect of the experiment is a small gain (.1%
on derf)
Change-Id: Ia34b3312fb9b5b34c9ba111bf0fa78c6f78ac80b
Some code re-factored / moved to allow the main
pack operation inside the recode loop so that the
size estimate is accurate.
Deletion of some redundant code relating to one pass.
Aproximate improvement over March 27 code base:
Derf 0.0%, YT 0.5%, YThd 0.3% Std_hd 0.25%
Change-Id: Id2d071794ab44f0b52935f6fcdb5733d09a6bb86
Various refactoring to make the subpel motion compensation
filters switchable by a frame level field.
Two types of 8-tap filters are supported in addition to the existing
bilinar and sixtap filters. One is the default 8-tap and the
other has a sharper cut-off for use with frames with substantial
edge content.
Patch 2: Added a preliminary strategy for filter selection based on
edginess detecton. Also includes some filter changes.
Change-Id: I866085bda5ae143cfdf2ec88157feaabdf7bd63a
This is the first patch for refactoring of the code related to
high-precision mv, so that 1/4 and 1/8 pel motion vectors can
co-exist in the same bit-stream by use of a frame level flag.
The current patch works fine for only use of 1/4th and
only use of 1/8th pel mv, but there are some issues with the
mode switching in between. Subsequent patches on this change Id
will fix the remaining issues.
Patch 2: Adds fixes to make sure that multiple mv precisions can
co-exist in the bit-stream. Frame level switching has been tested
to work correctly.
Patch 3: Fixes lines exceeding 80 char
Patch 4:
http://www.corp.google.com/~debargha/vp8_results/enhinterp.html
Results on derf after ssse3 bugfix, compared to everything
enabled but the 8-tap, 1/8-subpel and 1/16-subpel uv. Overall the
gains are about 3% now. Hopefully there are no more bugs lingering.
Apparently the sse3 bug affected the quartel subpel results more than
the eighth pel ones (which is understandabale because one bad predictor
due to the bug, matters less if there are a lot more subpel options
available as in the 1/8 subpel case).
The results in the 4th column correspond to the current settings.
The first two columns correspond to two settings of adaptive switching
of the 1/4 or 1/8 subpel mode based on initial Q estimate. These
do not work as good as just using 1/8 all the time yet.
Change-Id: I3ef392ad338329f4d68a85257a49f2b14f3af472
For the experimental branch we are trying to slim the codebase
down removing features such as threading for now which complicate
the process of development and testing.
Change-Id: I657c0246aef4d1fa8c8ffc6a1adfeee45bce8e24
In summary, this commit encompasses a series of changes in attempt to
improve the 8x8 transform based coding to help overall compression
quality, please refer to the detailed commit history below for what
are the rationale underly the series of changes:
a. A frame level flag to indicate if 8x8 transform is used at all.
b. 8x8 transform is not used for key frames and small image size.
c. On inter coded frame, macroblocks using modes B_PRED, SPLIT_MV
and I8X8_PRED are forced to using 4x4 transform based coding, the
rest uses 8x8 transform based coding.
d. Encoder and decoder has the same assumption on the relationship
between prediction modes and transform size, therefore no signaling
is encoded in bitstream.
e. Mode decision process now calculate the rate and distortion scores
using their respective transforms.
Overall test results:
1. HD set
http://www.corp.google.com/~yaowu/no_crawl/t8x8/HD_t8x8_20120206.html
(avg psnr: 3.09% glb psnr: 3.22%, ssim: 3.90%)
2. Cif set:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif_t8x8_20120206.html
(avg psnr: -0.03%, glb psnr: -0.02%, ssim: -0.04%)
It should be noted here, as 8x8 transform coding itself is disabled
for cif size clips, the 0.03% loss is purely from the 1 bit/frame
flag overhead on if 8x8 transform is used or not for the frame.
---patch history for future reference---
Patch 1:
this commit tries to select transform size based on macroblock
prediction mode. If the size of a prediction mode is 16x16, then
the macroblock is forced to use 8x8 transform. If the prediction
mode is B_PRED, SPLITMV or I8X8_PRED, then the macroblock is forced
to use 4x4 transform. Tests on the following HD clips showed mixed
results: (all hd clips only used first 100 frames in the test)
http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8.htmlhttp://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8_log.html
while the results are mixed and overall negative, it is interesting to
see 8x8 helped a few of the clips.
Patch 2:
this patch tries to hard-wire selection of transform size based on
prediction modes without using segmentation to signal the transform size.
encoder and decoder both takes the same assumption that all macroblocks
use 8x8 transform except when prediciton mode is B_PRED, I8X8_PRED or
SPLITMV. Test results are as follows:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/cifmodebase8x8_0125.htmlhttp://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8_0125log.html
Interestingly, by removing the overhead or coding the segmentation, the
results on this limited HD set have turn positive on average.
Patch 3:
this patch disabled the usage of 8x8 transform on key frames, and kept the
logic from patch 2 for inter frames only. test results on HD set turned
decidedly positive with 8x8 transform enabled on inter frame with 16x16
prediction modes: (avg psnr: .81% glb psnr: .82 ssim: .55%)
http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdintermode8x8_0125.html
results on cif set still negative overall
Patch 4:
continued from last patch, but now in mode decision process, the rate and
distortion estimates are computed based on 8x8 transform results for MBs
with modes associated with 8x8 transform. This patch also fixed a problem
related to segment based eob coding when 8x8 transform is used. The patch
significantly improved the results on HD clips:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/hd8x8RDintermode.html
(avg psnr: 2.70% glb psnr: 2.76% ssim: 3.34%)
results on cif also improved, though they are still negative compared to
baseline that uses 4x4 transform only:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif8x8RDintermode.html
(avg psnr: -.78% glb psnr: -.86% ssim: -.19%)
Patch 5:
This patch does 3 things:
a. a bunch of decoder bug fixes, encodings and decodings were verified
to have matched recon buffer on a number of encodes on cif size mobile and
hd version of _pedestrian.
b. the patch further improved the rate distortion calculation of MBS that
use 8x8 transform. This provided some further gain on compression.
c. the patch also got the experimental work SEG_LVL_EOB to work with 8x8
transformed macroblock, test results indicates it improves the cif set
but hurt the HD set slightly.
Tests results on HD clips:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/HD_t8x8_20120201.html
(avg psnr: 3.19% glb psnr: 3.30% ssim: 3.93%)
Test results on cif clips:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif_t8x8_20120201.html
(avg psnr: -.47% glb psnr: -.51% ssim: +.28%)
Patch 6:
Added a frame level flag to indicate if 8x8 transform is allowed at all.
temporarily the decision is based on frame size, can be optimized later
one. This get the cif results to basically unchanged, with one bit per
frame overhead on both cif and hd clips.
Patch 8:
Rebase and Merge to head by PGW.
Fixed some suspect 4s that look like hey should be 64s in regard
to segmented EOB. Perhaps #defines would be bette.
Bulit and tested without T8x8 enabled and produces unchanged
output.
Patch 9:
Corrected misalligned code/decode of "txfm_mode" bit.
Limited testing for correct encode and decode with
T8x8 configured on derf clips.
Change-Id: I156e1405d25f81579d579dff8ab9af53944ec49c
Merged in most of the current common prediction changes
that were under the #if CONFIG_COMPRED option.
Change-Id: If4e6f61dbe7b86dd449f6effbe93b5eb7e893885
Further changes to make experiments with the context
used for coding the dual pred flag easier.
Current best performing method tested on derf is a two
element context based on reference frame. I also tried
various combinations of mode and reference frame as
shown in commented out case using up to 6 contexts.
Derf +0.26 overall psnr +0.15% ssim vs original method.
Change-Id: I64c21ddec0abbb27feaaeaa1da2e9f164ebaca03
This commit merges the NEWNEAR experiment such that it
is effectively always on.
The fact that there were changes in the threading code again
highlights the need to strip out such features during the
bitstream development phase as trying to maintain this code
(especially as it is not being tested) slows the development cycle.
Change-Id: I8b34950a1333231ced9928aa11cd6d6459984b65
Trial of a modified prediction function that ranks each possible
reference frame based on a combination of local usage and
frame level probability. The code is a bit cleaner and simpler.
In direct comparison with old unpredicted method with segment level
coding turned off for mode,ref & EOB the prediction gives a gain on derf
of around 0.4%. There is some further gain from bug fixes over earlier code.
With segment coding on the prediction method is slightly -ve on some very
easy clips (at low rates) due to slightly higher overheads, but better on harder
clips. Overall neutral on derf in direct comparison on latest code base, but
compared to earlier code without bug fixes about +0.7% overall psnr
+0.3% SSIM.
Change-Id: I5b8474658b208134d352d24f6517f25795490789
This function adds the common prediction modules, some data structures
and a config option but does not use them.
It also corrects a bug in clearing down the MODE_INFO border and introduces
a new element that indicates if an entry corresponds to an "in image" macro block
or is part of the border.
Change-Id: Ib69eec0876173ebe9d1de9df9537d0b2447702e0
This commit extends the number of Q steps to 256 from 128.
The q_trans[] array has been altered to distribute available Q index values
(using the current 64 steps available as input parameters) evenly across the
available range. This is coupled with the fact that each Q step where possible
now equates to a fixed % change in the quantizer. This may want refinement
later especially in terms of the granularity at the high quality end but is a
reasonable starting point.
Change-Id: I2aaa6874fa10ce05c958dd182947ce39f6f1eecb
Added code to support 256 index steps instead of 128 but disabled for now.
Replace hard wired table vp8cx_base_skip_false_prob[128]
Observed Qindex problem with setting minimum loop filter value.
(Experiment code using real Q in place but for now just returning 0. This has a big
beneficial effect on some clips, particularly waterfall which shows 5% ssim gain)
Change-Id: I2f7117de8adc1797164c106aa13effc900a1467e
Previously, Y-adaptive UV intra coding only enabled on key frames in
UVINTRA experiment. This commit enabled the same coding for inter
frames, so the encoding of UV intra modes are consistent cross all
frame types. Tests on derf set showed a very small overall gain around
.04%:
http://www.corp.google.com/~yaowu/no_crawl/interUVintra.html
The gain looks to be reasonable given inta coded MBs is only a
small portion of MBs in inter frames.
Change-Id: Ic6fc261923f2c253f4a0c9f8bccf4797557b9e16
A previous commit 76feb965 made the vp8_mode_context adaptive on a frame
frame basis, this commit further made the coding context adaptive to two
frame types separately. Tests on derf set showed a further small gain on
all metrics: avg psnr 0.10%, glb psnr: 0.11%, ssim: 0.08%
http://www.corp.google.com/~yaowu/no_crawl/newNearMode_1209.html
Change-Id: I7b3e32ec8729de1903d14a3f1213f1624b78cdee
This commit removed the macro CONFIG_MULCONTEXT, which was used to
indicate the experiment code for using separate context for altref
and normal frames. This commit made the change fully merged in.
Change-Id: I525f927f68e2365d37b340ef23b836a136a4f70b
This commit removed the macro CONFIG_I8X8, which was used to indicate
the 8x8 intra prediction experiment, made the change fully merged in.
Change-Id: Iafa4443781ce6e83f5591c12ba615a0e92ce0ea0
vp8_mode_contexts[] is an entropy table used to code inter mode
choices. It was a fixed constant table. This commit made the entropy
context adaptive. Tests on derf set showed very good consistent gains
on all metrics: avg psnr .47%, overall psnr .46% and ssim .40%.
http://www.corp.google.com/~yaowu/no_crawl/newModeContext.html
Change-Id: Ia62b14485c948e2b74586118619c5eb2068b43b2
This patch introduces the concept of dual inter16x16 prediction. A
16x16 inter-predicted macroblock can use 2 references instead of 1,
where both references use the same mvmode (new, near/est, zero). In the
case of newmv, this means that two MVs are coded instead of one. The
frame can be encoded in 3 ways: all MBs single-prediction, all MBs dual
prediction, or per-MB single/dual prediction selection ("hybrid"), in
which case a single bit is coded per-MB to indicate whether the MB uses
single or dual inter prediction.
In the future, we can (maybe?) get further gains by mixing this with
Adrian's 32x32 work, per-segment dual prediction settings, or adding
support for dual splitmv/8x8mv inter prediction.
Gain (on derf-set, CQ mode) is ~2.8% (SSIM) or ~3.6% (glb PSNR). Most
gain is at medium/high bitrates, but there's minor gains at low bitrates
also. Output was confirmed to match between encoder and decoder.
Note for optimization people: this patch introduces a 2nd version of
16x16/8x8 sixtap/bilin functions, which does an avg instead of a
store. They may want to look and make sure this is implemented to
their satisfaction so we can optimize it best in the future.
Change-ID: I59dc84b07cbb3ccf073ac0f756d03d294cb19281
This commit added code to keep track of separate entropy contexts for
normal frames and alt ref frames. The underly assumption was that the
two type of frames have different entropy characteristics given they
typically have quite different quantization levels. By keeping entropy
contexts separate, it helps the entropy context distribution to be more
closely adapted to each frame type.
Tests on derf set showed a good and very consistent gain on all clips
on all metrics, avg psnr: 0.89%, overall psnr: 0.84% and ssim 0.93%.
http://www.corp.google.com/~yaowu/no_crawl/mulcontext.html
Change-Id: I15bc9697f6ff7829042911fe0c62930585d7e65d
This commit tries to do UV intra mode coding adaptive to Y intra mode.
Entropy context is defined as conditional PDF of uv intra mode given
the Y mode. All constants are normalized with 256 to be fit in 8 bits.
This provides further coding efficiency beyond the quantizer adaptive
y intra mode coding. Consistent gains were observed on all clips and
all bit rates for HD all key encoding tests.
To test, configure with
--enable-experimental --enable-uvintra
Change-Id: I2d78d73f143127f063e19bd0bac3b68c418d756a
This commit added a 3 bit index to the bitstream, the index is used to
look into the intra mode coding entropy context table. The commit uses
the mode stats to calculate the cost of transmitting modes using 8
possible entropy distributions, and selects the distribution that
provides the lowest cost to do the actual mode coding.
Initial test show this provides additional .2%~.3% gain over quantizer
adaptive intra mode coding. So the adaptive intra mode coding provides
a total of .5%(psnr) to .6% gain(ssim) combined for all-key-encoding
To build and test, configure with
--enable-experimental --enable-qimode
Change-Id: I7c41cd8bfb352bc1fe7c5da1848a58faea5ed74a
make intra mode coding entropy distribution adaptive to baseQindex, an
encoding test on hd clips with all key frame shows universal gain on
all clips in both .2%(psnr) and (ssim).3%.
To build and test, configure with
--enable-experimental --enable-qimode
Change-Id: Iaa69241b984d4fdd8baa6d77ee78c0140f5ac00a
Patch 1 to Patch 3 is an initial implementation of 8x8 intra prediction
modes, here are with the following assumptions:
a. 8x8 has 4 prediction modes DC, H, V and TM
b. UV 4x4 block use the same mode as corresponding 8x8 area
c. i8x8 modes are enabled for key frame only for now
Patch 4:
d. removed debug code from previous patches
Patch 5:
e. added stats code to collect entropy stats and further cleaned up
Patch 6:
f. changed mode stats code to collect finer stats of modes
Patch 7:
g. normalized i8x8 modes distribution to total at 256 (8bits).
Patch 8:
h. fixed a bug in decoder and removed debug printf output.
Patch 9:
i. more cleanups to address paul's comment
Patch 10:
j. messy rebase/merges to bring the commit up to date.
Tests on HD clips encoded with all key frame showing consistent gain
on all clips and all metrics:~0.5%(psnr) and 0.6%(ssim):
http://www.corp.google.com/~yaowu/no_crawl/i8x8hd_allkey_fixedq.html
To build and test, configure with:
--enable-experimental --enable-i8x8
Change-Id: I9813fe07ae48cab5fdb5d904bca022514ad01e7f
sharpness was not recalculated in vp8cx_pick_filter_level_fast
remove last_filter_type. all values are calculated, don't need to update
the lfi data when it changes.
always use cm->sharpness_level. the extra indirection was annoying.
don't track last frame_type or sharpness_level manually. frame type
only matters for motion search and sharpness_level is taken care of in
frame_init
move function declarations to their proper header
Change-Id: I7ef037bd4bf8cf5e37d2d36bd03b5e22a2ad91db
Separate simple filter with reduced no. of parameters.
MB filter level picking based on precalculated table. Level table updated for
each frame. Inside and edge limits precalculated and updated just when
sharpness changes. HEV threshhold is constant.
ARM targets use scalars and others vectors.
Change works only with --target=generic-gnu
All other targets have to be updated!
Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
There were many instances in the code of vp8_coef_tokens and
vp8_coef_tokens-1, which was a preprocessor macro despite the naming
convention. Replace these with MAX_ENTROPY_TOKENS and ENTROPY_NODES,
respectively.
Change-Id: I72c4f6c7634c94e1fa066cd511471e5592c748da
With this commit frames can be received partition-by-partition
from the encoder and passed partition-by-partition to the
decoder.
At the encoder-side this makes it easier to split encoded
frames at partition boundaries, useful when packetizing
frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled,
several VPX_CODEC_CX_FRAME_PKT packets will be returned
from vpx_codec_get_cx_data(), containing one partition
each. The partition_id (starting at 0) specifies the decoding
order of the partitions. All partitions but the last has
the VPX_FRAME_IS_FRAGMENT flag set.
At the decoder this opens up the possibility of decoding partition
N even though partition N-1 was lost (given that independent
partitioning has been enabled in the encoder) if more info
about the missing parts of the stream is available through
external signaling.
Each partition is passed to the decoder through the
vpx_codec_decode() function, with the data pointer pointing
to the start of the partition, and with data_sz equal to the
size of the partition. Missing partitions can be signaled to
the decoder by setting data != NULL and data_sz = 0. When
all partitions have been given to the decoder "end of data"
should be signaled by calling vpx_codec_decode() with
data = NULL and data_sz = 0.
The first partition is the first partition according to the
VP8 bitstream + the uncompressed data chunk + DCT address
offsets if multiple residual partitions are used.
Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
