This speed feature will skip searching the directional intra prediction
modes D63, D117, D27, D153 if the best intra mode so far is not one of
the diagonal, horizontal or vertical directions closest to the respective
directions being tested. In other words, this implements a sort of
binary search in the angular domain.
Speedup: about 9-10%
Results: -0.05% only on derfraw300.
Change-Id: I413584c41f2a3e8dabfbdeb40718c8fc4b1d63a2
(1) Refines the modeling function and uses that to add some speed
features. Specifically, intead of using a flag use_largest_txfm as
a speed feature, an enum tx_size_search_method is used, of which
two of the types are USE_FULL_RD and USE_LARGESTALL. Two other
new types are added:
USE_LARGESTINTRA (use largest only for intra)
USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for
inter)
(2) Another change is that the framework for deciding transform type
is simplified to use a heuristic count based method rather than
an rd based method using txfm_cache. In practice the new method
is found to work just as well - with derf only -0.01 down.
The new method is more compatible with the new framework where
certain rd costs are based on full rd and certain others are
based on modeled rd or are not computed. In this patch the existing
rd based method is still kept for use in the USE_FULL_RD mode.
In the other modes, the count based method is used.
However the recommendation is to remove it eventually since the
benefit is limited, and will remove a lot of complications in
the code
(3) Finally a bug is fixed with the existing use_largest_txfm speed feature
that causes mismatches when the lossless mode and 4x4 WH transform is
forced.
Results on derf:
USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction
USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a
pretty good compromise)
USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction
(currently the benefit of modeling is limited for txfm size selection,
but keeping this enum as a placeholder) .
USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing
use_largest_txfm speed feature).
Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
Added a speed feature in speed 1 to disable splitmv for HD (>=720)
clips. Test result on stdhd set: 0.3% psnr loss and 0.07% ssim
loss. Encoding speedup is 36%.
(For reference: The test result on derf set showed 2% psnr loss
and 1.6% ssim loss. Encoding speedup is 34%. SPLITMV should be
enabled for small resolution videos.)
Change-Id: I54f72b94f506c6d404b47c42e71acaa5374d6ee6
This cl converts use partition from last frame to do the following:
if part is none,horz, vert -> try split
if part != none and one of the children is not split - try none
Change-Id: I5b6c659e35f3ac9f11c051b92ba98af6d7e8aa87
Signed-off-by: Jim Bankoski <jimbankoski@google.com>
Total encoding time for first 50 frames of bus (speed 0) @ 1500kbps
goes 2min34.8 to 2min14.4, i.e. a 10.4% overall speedup. The code is
x86-64 only, it needs some minor modifications to be 32bit compatible,
because it uses 15 xmm registers, whereas 32bit only has 8.
Change-Id: I2df53770c2e850813ffa713e1a91b45b0082b904
Added a speed feature that focuses only on thresholds
for new motion modes.
Moved sf->comp_inter_joint_search_thresh into speed
1. This has ~+0.4% impact on quality at speed 0 as
our quality reference baseline.
Slight adjustment to baseline thresholds.
Change-Id: I7ebf104f1fe29af77ed4837b2e84be065621bbe5
Adding CHECK_MEM_ERROR macro to vp9_common.h and removing two duplicated
ones from vp9_onyx_int.h and vp9_onyxd_int.h.
Change-Id: I916afec61b3019f18193135dac7c35ed0f89b8b6
This commit replaces zrun_zbin_boost, a method of biasing non-zero
coefficients following runs of zero-coefficients to be rounded towards
zero, with an explicit skip-block choice in the RD loop.
The logic is basically that if individual coefficients should be rounded
towards zero (from a RD point of view), the trellis/optimize loop should
take care of it. If whole blocks should be zero (from a RD point of
view), a single RD check is much more efficient than a complete
serialization of the quantization loop.
Quality change: derf +0.5% psnr, +1.6% ssim; yt +0.6% psnr, +1.1% ssim.
SIMD for quantize will follow in a separate patch. Results for other
test sets pending.
Change-Id: Ife5fa641163ac5150ac428011e87188f1937c1f4
This commit change the partition search order to allow checking of
rectangular partition to be done after square partitions. It also
added a speed feature to skip rectangular partition check when
NONE is better than SPLIT in RD sense.
This feature roughly speed up encoder by 1.5X with loss on compression
-0.91% on cif set
-0.56% on stdhd set
Change-Id: I0d2d06993041aa9ea9073fcc39c54f73a127dfa4
This commit enables configurable reference buffer pointer for intra
predictor. This allows later removal of spatial dependency between
blocks inside a 64x64 superblock in the rate-distortion optimization
loop.
Change-Id: I02418c2077efe19adc86e046a6b49364a980f5b1
Also tweaks to other features and experiments with
what is on and off at different speed settings.
Change-Id: I3e1d0be0d195216bf17c2ac5df67f34ce0b306b2
Renamed cpi->sf.first_step to cpi->sf.reduce_first_step_size
and changed its meaning such that it is a delta applied to
reduce the default first step size (>> x) in the motion search
rather than an absolute value.
The default first step size is already changed according to the image
dimensions (smaller for smaller images). cpi->sf.reduce_first_step_size
now applies a further correction from the default.
Change-Id: Ia94e08bc24c67b604831f980909af7e982fcd16d
This uses variance to split partition. Variance is calculated using
nearest mv, always from last ref frame.
Change-Id: Idd015b4a9aa3bc82591759eac239680c07496896
Reduces TX_SIZE contexts to 2 for each kind. The code is
cleaner and there is hardly any performance difference with
more than two contexts.
Results: almost neutral
Change-Id: I17656bd6db76224ae2856adf882504560e7dbaa4
Adds coding of transform size within a frame by use of context
of transform sizes selected in left and above blocks.
Also incorporates code for generating stats.
TODO: generate and incorporate new default stats
Change-Id: I6a7af099f6ad61d448521d9a51167aedaf638ed6
Refactors mbskip coding to be compatible with coding of the rest of
the symbols. Adds forward/backward adaptation and removes a lot of
the legacy code.
Results:
fast50: +1.6%
derfraw300: +0.317%
Change-Id: I395a2976d15af044d3b8ded5acfa45f6f065f980
With the removal of i4X4 and SPLIT_MV modes, the two entries for the
modes are no longer used. This patch remove the coding of the deltas.
Change-Id: Iea4eb500404ebe9706159380a03b8eca542fb4c3
Changes to the coding of transform sizes, along with forward
and backward probability updates.
Results:
derf300: +0.241%
Context based coding of transform sizes will be in a separate
patch.
Change-Id: I97241d60a926f014fee2de21fa4446ca56495756
Code intra/inter, then comp/single, then the ref frame selection.
Use contextualization for all steps. Don't code two past frames
in comp pred mode.
Change-Id: I4639a78cd5cccb283023265dbcc07898c3e7cf95
Split partition probabilities between keyframes and non-keyframes,
since they are fairly different. Also have per-blocksize interframe
y intramode probabilities, since these vary heavily between different
blocksizes.
Lastly, replace default probabilities for partitioning and intra modes
with new ones generated from current codec. Replace counts with actual
probabilities also.
Change-Id: I77ca996e25e4a28e03bdbc542f27a3e64ca1234f
Added structures to support independent rd thresholds
for different block sizes (and set experimental block
size correction factors).
Added structure to to allow dynamic adaptation of thresholds
per mode and per block size basis depending on how often
the mode/block size combination is seen (currently fixed factor).
Removed some unused variables.
TODO
- Adaptation of thresholds based on how often each mode chosen.
- The baseline mode values could also be adjusted based on
the block size (e.g. for a particular intra mode use a low threshold
for 4x4 prediction blocks but a relatively high value for 64x64.
Change-Id: Iddee65ff3324ee309815ae7c1c5a8584720e7568
Adds backward adaptation and differential forward updates of switchable
interpolation filter probabilities. Also adds some cosmetic cleanups
and minor fixes on mv_ref probabilities.
derfraw300: +0.353% (with most coming from switchable interp changes)
Change-Id: Ie2718be73528c945fd0d80cfd63ca2d9cb3032de
Fixes an issue with reducing branch cts in the encoder causing
a drop in performance. The bug was introduced in a previous
clean up patch.
Test: Went back to the offending patch, applied this same fix
to it, and checked that results are identical to the parent
of that patch.
Change-Id: I0bad8e2d930235d0284300fcebf836ceb56f2498
This commit enables iterative motion search for 4x4/4x8/8x4 block
size compound inter-inter prediction.
WIP: borg run testing
Change-Id: I2b318db4a03cdca5a8002b3fa6c0fa89b129288b
