These functions are now used by the encoder.
This is WIP with the goal of creating a common idct/add for
the encoder and decoder. A boost of 1.8% was seen for
the HD rt test clip used.
[Tero] Added needed changes to ARM side.
Change-Id: Ibbb8000be09034203d7adffc457d3c3f8b06a5bf
While doing motion search on a macroblock, we usually call
vp8_find_near_mvs once per reference frame. Actually, for
different reference frames, the only difference in calculating
these near_mvs is they may have different sign_bias, which
causes a sign change in resulting near_mvs. In this change, we
only do find_near_mvs for the first reference frame. For other
reference frames, only need to adjust the near_mvs according to
that reference frame's sign_bias value.
Change-Id: I661394b49c6ad79fed7d0f2eb2be239b9c56f149
The example encoder down-samples the input video frames a number of
times with a down-sampling factor, and then encodes and outputs
bitstreams with different resolutions.
Support arbitrary down-sampling factor, and down-sampling factor
can be different for each encoding level.
For example, the encoder can be tested as follows.
1. Configure with multi-resolution encoding enabled:
../libvpx/configure --target=x86-linux-gcc --disable-codecs
--enable-vp8 --enable-runtime_cpu_detect --enable-debug
--disable-install-docs --enable-error-concealment
--enable-multi-res-encoding
2. Run make
3. Encode:
If input video is 1280x720, run:
./vp8_multi_resolution_encoder 1280 720 input.yuv 1.ivf 2.ivf 3.ivf 1
(output: 1.ivf(1280x720); 2.ivf(640x360); 3.ivf(320x180).
The last parameter is set to 1/0 to show/not show PSNR.)
4. Decode:
./simple_decoder 1.ivf 1.yuv
./simple_decoder 2.ivf 2.yuv
./simple_decoder 3.ivf 3.yuv
5. View video:
mplayer 1.yuv -demuxer rawvideo -rawvideo w=1280:h=720 -loop 0 -fps 30
mplayer 2.yuv -demuxer rawvideo -rawvideo w=640:h=360 -loop 0 -fps 30
mplayer 3.yuv -demuxer rawvideo -rawvideo w=320:h=180 -loop 0 -fps 30
The encoding parameters can be modified in vp8_multi_resolution_encoder.c,
for example, target bitrate, frame rate...
Modified API. John helped a lot with that. Thanks!
Change-Id: I03be9a51167eddf94399f92d269599fb3f3d54f5
There was an implicit reference frame test order (typically LAST,
GOLD, ARF) in the mode selection logic, but this doesn't provide the
expected results when some reference frames are disabled. For
instance, in real-time mode, the speed selection logic often disables
the ARF modes. So if the user disables the LAST and GOLD frames, the
encoder was always choosing INTRA, when in reality searching the ARF
in this case has the same speed penalty as searching LAST would have
had.
Instead, introduce the notion of a reference frame search order. This
patch preserves the former priorities, so if a frame is disabled, the
other frames bump up a slot to take its place. This patch lays the
groundwork for doing something smarter in the frame test order, for
example considering temporal distance or looking at the frames used by
nearby blocks.
Change-Id: I1199149f8662a408537c653d2c021c7f1d29a700
Patch set 2: 64 bit build fix
Patch set 3: 64 bit crash fix
[Tero]
Patch set 4: Updated ARMv6 and NEON assembly.
Added also minor NEON optimizations to subtract
functions.
Patch set 5: x86 stride bug fix
Change-Id: I1fcca93e90c89b89ddc204e1c18f208682675c15
The calculated frame_rate is a state variable in the codec, and
shouldn't be maintained in the configuration struct. Move it to the
main part of cpi so that it isn't clobbered when the configuration
struct is updated. The initial framerate estimate is moved from the
vp8_cx_iface.c wrapper into the body of init_config() in onyx_if.c, so
that it is only called once and not reset on every call to
vp8_change_config().
Change-Id: I8d9a3d1283330d1ee297d07e9d78d1f2875f2465
Added ARM optimized intra 4x4 prediction
- 2x faster on Profiler compared to C-code compiled with -O3
- Function interface changed a little to improve BLOCKD structure
access
Change-Id: I9bc2b723155943fe0cf03dd9ca5f1760f7a81f54
vp8cx_mb_init_quantizer() needs to be called at least once to get
all values calculated. This change added one check to decide if
we could skip initialization or not.
Change-Id: I3f65eb548be57580a61444328336bc18c25c085b
Changed 'int eob' to 'char *eob' in BLOCKD so that both encoder and
decoder will use eobs[25] array from MACROBLOCKD structure. In future,
this will enable use of the decoder side IDCT in the encoder.
Change-Id: I6e1c011628cb8864fd4a0b80f0279ce16a5ca978
Instead of using the predict buffer, the decoder now writes
the predictor into the recon buffer. For blocks with eob=0,
unnecessary idcts can be eliminated. This gave a performance
boost of ~1.8% for the HD clips used.
Tero: Added needed changes to ARM side and scheduled some
assembly code to prevent interlocks.
Patch Set 6: Merged (I1bcdca7a95aacc3a181b9faa6b10e3a71ee24df3)
into this commit because of similarities in the idct
functions.
Patch Set 7: EC bug fix.
Change-Id: Ie31d90b5d3522e1108163f2ac491e455e3f955e6
for SPLITMV and B_PRED modes. Modified code to use the bmi
found in mode_info_context instead of BLOCKD. On the decode
side, the uvmvs are calculated only when required, instead of
every macroblock. This is WIP. (bmi should eventually be
removed from BLOCKD)
Small performance gains noticed for RT encodes and decodes.(VGA)
Change-Id: I2ed7f0fd5ca733655df684aa82da575c77a973e7
This change implemented same idea in change "Preload reference area
to an intermediate buffer in sub-pixel motion search." The changes
were made to vp8_find_best_sub_pixel_step() and vp8_find_best_half
_pixel_step() functions which are called when speed >= 5. Test
result (using tulip clip):
1. On Core2 Quad machine(Linux)
rt mode, speed (-5 ~ -8), encoding speed gain: 2% ~ 3%
rt mode, speed (-9 ~ -11), encoding speed gain: 1% ~ 2%
rt mode, speed (-12 ~ -14), no noticeable encoding speed gain
2. On Xeon machine(Linux)
Test on speed (-5 ~ -14) didn't show noticeable speed change.
Change-Id: I21bec2d6e7fbe541fcc0f4c0366bbdf3e2076aa2
There were some situations that the start motion vectors were
out of range. This fix adjusted range checks to make sure they
are checked and clamped.
Change-Id: Ife83b7fed0882bba6d1fa559b6e63c054fd5065d
Do mvp clamping in full-pixel precision instead of 1/8-pixel
precision to avoid error caused by right shifting operation.
Also, further fixed the motion vector limit calculation in change:
b748045470
Change-Id: Ied88a4f7ddfb0476eb9f7afc6ceeddbf209fffd7
Motion vector limits are calculated using right shifts, which
could give wrong results for negative numbers. James Berry's
test on one clip showed encoder produced some artifacts. This
change fixed that.
Change-Id: I035fc02280b10455b7f6eb388f7c2e33b796b018
There were many instances in the code of vp8_coef_tokens and
vp8_coef_tokens-1, which was a preprocessor macro despite the naming
convention. Replace these with MAX_ENTROPY_TOKENS and ENTROPY_NODES,
respectively.
Change-Id: I72c4f6c7634c94e1fa066cd511471e5592c748da
I got this idea from Pascal (Thanks). Before encoding a macroblock,
copy it to a 16x16 buffer, and then read source data from there
instead. This will help keep the source data in cache, and help
with the performance.
Change-Id: Id05f4cb601299150511d59dcba0ae62c49b5b757
RDMULT/RDDIV defines a bit worth of distortion in term of sum squared
difference. This has also been used as errorperbit in subpixel motion
search, where the distortions computed as variance of the difference.
The variance of differences is different from sum squared differences
by amount of DC squared. Typically, for inter predicted MBs, this
difference averages around 10% between the two distortion, so this patch
introduces a 110% constant in deriving errorperbit from RDMULT/RDDIV.
Test on CIF set shows small but positive gain on overall PSNR (.03%)
and SSIM (.07%), overall impact on average PSNR is 0.
Change-Id: I95425f922d037b4d96083064a10c7cdd4948ee62
This change is analogous to I0b67dae1f8a74902378da7bdf565e39ab832dda7,
which made the move for the non-RD path.
Change-Id: If63fc1b0cd1eb7f932e710f83ff24d91454f8ed1
While investigating the effect of DC values on SAD and SSE in motion
estimation, a side finding indicates the two table of constants need
be adjusted. The adjustment was done by multiplying old constants by
90% with rounding. Also absorb the 1/2 scaling constant into the two
tables. Refer to change Ifa285c3e for background of the 1/2 factor.
Cif set test showed a very small gain on all metric.
Change-Id: I04333527a823371175dd46cb04a817e5b9a8b752
The encoder defined about 4 set of similar functions to calculate sum,
variance or sse or a combination of them. This commit removed one set
of these functions, get8x8var and get16x16var, where calls to the later
function are replaced with var16x16 by using the fact on a 16x16 MB:
variance == sse - sum*sum/256
Change-Id: I803eabd1fb3ab177780a40338cbd596dffaed267
Declared the bmi in BLOCKD as a union instead of B_MODE_INFO.
Then removed B_MODE_INFO completely.
Change-Id: Ieb7469899e265892c66f7aeac87b7f2bf38e7a67
this commit makes the usage errorperbit and sadperbit consistent for
encoding modes and passes. Removed all different magic weight factors
associated with errorperbit. Now 1/2 is used for both sadperbit16 and
sadperbit4, the /2 operation is merged into initializations of the 2
variables.
Tests on cif set show .23%, 0.18% and 0.19% gain by avg psnr, overall
psnr and ssim respectively.
Change-Id: Ifa285c3e065ce0a5a77addfc9f95aabf54ee270d
sad_per_bit has been used for a number of motion vector search routines
with different magic weights: 1, 1/2 and 1/4. This commit remove these
magic numbers and use 1/2 for all motion search routines, also reformat
a number of source code lines to within 80 column limit.
Test on cif set shows overall effect is neutral on all metrics. <=0.01%
Change-Id: I8a382821fa4cffc9c0acf8e8431435a03df74885
Declared the bmi in MODE_INFO as a union instead of B_MODE_INFO.
This reduced the memory footprint by 518,400 bytes for 1080
resolutions. The decoder performance improved by ~4% for the
clip used and the encoder showed very small improvements. (0.5%)
This reduction was first mentioned to me by John K. and in a
later discussion by Yaowu.
This is WIP.
Change-Id: I8e175fdbc46d28c35277302a04bee4540efc8d29
This patch collects the twopass specific memebers of VP8_COMP into a
dedicated struct. This is a first step towards isolating the two pass
rate control and aids readability by decorating these variables with
the 'twopass.' namespace. This makes it clear to the reader in what
contexts the variable will be valid, and is a hint that a section of
code might be a good candidate to move to firstpass.c in later
refactoring. There likely will be other rate control modes that need
their own specific data as well.
This notation is probably overly verbose in firstpass.c, so an
alternative would be to access this struct through a pointer like
'rc->' instead of 'cpi->firstpass.' in that file. Feel free to make
a review comment to that effect if you prefer.
Change-Id: I0ab8254647cb4b493a77c16b5d236d0d4a94ca4d
The partition_info struct contains info just for SPLITMV,
so it should be used instead of BLOCKD. Eventually, I want
to reduce the size of B_MODE_INFO struct found in BLOCKD, so
this is the first step toward that goal.
Also, since SPLITMV is not supported in vp8_pick_inter_mode(),
the unnecessary mem copies and checks were removed. For rt
encodes, this gave a slight performance improvement.
Change-Id: I5585c98fa9d5acbde1c7e0f452a01d9ecc080574
