Commit Graph

14 Commits

Author SHA1 Message Date
Johann
a7d4d3c550 clean up unused variable warnings
Change-Id: I9467d7a50eac32d8e8f3a2f26db818e47c93c94b
2011-05-09 12:56:20 -04:00
John Koleszar
4226f0ce64 vpxdec: test for frame corruption
This change simply exercises the VP8D_GET_FRAME_CORRUPTED control,
outputting a warning message at the end if the bit was set for any
frames. Should never produce any output for good input.

Change-Id: Idaf6ba8f53660f47763cd563fa1485938580a37d
2011-04-27 12:04:48 -04:00
Tero Rintaluoma
11a222f5d9 Adds "armvX-none-rvct" targets
Adds following targets to configure script to support RVCT compilation
without operating system support (for Profiler or bare metal images).
 - armv5te-none-rvct
 - armv6-none-rvct
 - armv7-none-rvct

To strip OS specific parts from the code "os_support"-config was added
to script and CONFIG_OS_SUPPORT flag is used in the code to exclude OS
specific parts such as OS specific includes and function calls for
timers and threads etc. This was done to enable RVCT compilation for
profiling purposes or running the image on bare metal target with
Lauterbach.

Removed separate AREA directives for READONLY data in armv6 and neon
assembly files to fix the RVCT compilation. Otherwise
"ldr <reg>, =label" syntax would have been needed to prevent linker
errors. This syntax is not supported by older gnu assemblers.

Change-Id: I14f4c68529e8c27397502fbc3010a54e505ddb43
2011-01-28 12:47:39 +02:00
John Koleszar
19255b8fe0 vpxdec: fix use of uninitialized memory for raw files
The sz member of the vpx_codec_stream_info_t structure must be
initialized when passed to vpx_codec_peek_stream_info().

Change-Id: I2d13d287d9639262b932cf44671a595fdf3c38ef
2010-11-23 13:49:40 -05:00
Fritz Koenig
647df00f30 postproc : Re-work posproc calling to allow more flags.
Debugging in postproc needs more flags to allow for specific
block types to be turned on or off in the visualizations.

Must be enabled with --enable-postproc-visualizer during
configuration time.

Change-Id: Ia74f357ddc3ad4fb8082afd3a64f62384e4fcb2d
2010-11-10 14:14:46 -08:00
John Koleszar
bd05d9e480 vpxdec: report parse errors from webm_guess_framerate()
If this function fails silently, the nestegg context is destroyed and
future nestegg calls will segfault.

Change-Id: Ie6a0ea284ab9ddfa97b1843ef8030a953937c8cd
2010-11-04 14:56:48 -04:00
John Koleszar
c377bf0eec fix pipe support on windows
STDIO streams are opened in text mode by default on Windows. This patch
changes the stdin/stdout streams to be in binary mode if they are being
used for I/O from the vpxenc or vpxdec tools.

Fixes issue #216. Thanks to mw AT hesotech.de for the fix.

Change-Id: I34525b3ce2a4a031d5a48d36df4667589372225b
2010-11-02 09:14:24 -04:00
Timothy B. Terriberry
c4d7e5e67e Eliminate more warnings.
This eliminates a large set of warnings exposed by the Mozilla build
 system (Use of C++ comments in ISO C90 source, commas at the end of
 enum lists, a couple incomplete initializers, and signed/unsigned
 comparisons).
It also eliminates many (but not all) of the warnings expose by newer
 GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite
 without checking the return values).
There are a few spurious warnings left on my system:

../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used
 uninitialized in this function
gcc seems to be unable to figure out that the value shortcut doesn't
 change between the two if blocks that test it here.

../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned
 expression >= 0 is always true
../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned
 expression >= 0 is always true
This is true, so far as it goes, but it's comparing against an enum, and the C
 standard does not mandate that enums be unsigned, so the checks can't be
 removed.

Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 18:08:04 -07:00
John Koleszar
24c86055c3 vpxdec: don't require -o with --noblit
Specifiying the output file is meaningless when we're not writing to
it.

Change-Id: I271e1d3ae1994d79f0773747477124600f98ca58
2010-10-27 13:00:30 -04:00
Fritz Koenig
cf127474d8 vpxdec : Change --pp-debug-info to be a bit field.
This allows multiple post processor debug levels to be overlayed.
i.e. can show colored reference blocks and visual motion vectors.

Change-Id: Ic4a1df438445b9f5780fe73adb3126e803472e53
2010-10-27 09:53:37 -07:00
John Koleszar
933d44b818 vpxdec: rework default output parameters
This patch reworks the default behavior of the tool to output Y4M
instead of writing individual raw frames. The relevant controls are
now:
  --yv12, --i420  - These options change the output format to be
                    raw planar data. The output will be Y4M unless
                    one of these options is specified.

  --flipuv        - Swaps the chroma planes. Works with Y4M output.

  -o, --output    - Sets the output filename. Defaults to stdout if
                    not specified. Supports escape character
                    expansion for frame width (%w) height (%h) and
                    sequence number (%1..%9). The --prefix option
                    has been removed in favor of this escape
                    expansion.

Since the output defaults to stdout if -o is not specified, an
error will be thrown if stdout is not connected to a pipe. This
can be overridden by specifying '-o -'.

Change-Id: I94e42c57ca75721fdd57a6129e79bcdb2afe5d4d
2010-10-25 22:32:03 -04:00
John Koleszar
4b578ea6c4 vpxdec: replace --quiet with --verbose
Be quiet by default, to play nicer with scripts.

Change-Id: I68f6c88411fd5487566f268fb73b4e55ae64410c
2010-10-25 22:24:36 -04:00
John Koleszar
5d12e04d16 vpxdec: use the same output for --progress and --summary
Update the timing information in-place for the --progress
option.

Change-Id: I8efea57050db72963c0bc5c994425e7e692d1502
2010-10-25 22:22:40 -04:00
John Koleszar
ea68ee0458 rename ivf{enc,dec} to vpx{enc,dec}
The new WebM output support should be preferred to IVF, but we can't
change the default behavior of the ivf* tools. There are a few other
default behaviors for these tools that are counterintuitive for
historical reasons, and changing the binary name provides the
opportunity to clean those up as well. This patch takes the first
step by renaming the binaries.

Change-Id: I647008ae37cc352dd27ec1da7ed13489e0609b24
2010-10-25 22:12:44 -04:00