buffer_level in VP8_COMP and starting_buffer_level, optimal_buffer_level
and maximum_buffer_size in VP8_CONFIG changed from int to int64_t
to avoid potential crash issues for larger target bit rates.
Change-Id: I0d5ab6c8a44c2fef51f30cd8df4bb4b739c5df26
Previous entropy probs need to be saved (and restored) only when
current updates are not propagated.
Change-Id: Ie6ee0543066e30874e56258be0a6b7d2dd2fdb2b
When 8x8 transform is enabled, the decoder does an extra reconstruct
on MBs that are coded using 8x8. This commit fixed the logic around
the decoding of mb encoded with 8x8 transform.
Change-Id: I6926557c9ef00eecb375f62946f7e140c660bf6f
Uninitialized data could be written to the first pass file when no
motion vectors are present in the frame.
Also fix a number of compiler warnings.
Change-Id: Icc9f53b6d33da9de4563d86d9fd591910473ea90
Proof of concept test code that encodes mode and reference
frame data at the segment level.
Decode-able bit stream but some issues not yet resolved.
As it this helps a little on a couple of clips but hurts on most as
the basis for segmentation is unsound.
To build and test, configure with
--enable-experimental --enable-segfeatures
Change-Id: I22a60774f69273523fb152db8c31f4b10b07c7f4
The data processed by the loopfilter overlaps. At the block level, this
results in some redundant transforms. Grouping the filtering allows for
a single 16x16 transpose (and inversion) instead of three 16x8 transposes
(and three more inversions).
This implementation is x86_64 only. We retain the previous
implementation for x86.
Improvements are obviously material dependant, but it seems to be ~%1 in
tests here.
Change-Id: I467b7ec3655be98fb5f1a94b5d145e5e5a660007
vp8_find_near_mvs() is being called on all possible reference frames
but the data computed may be used if the loop exits early, which can
be due to x->skip beign set to 1.
Optimize this by call vp8_find_near_mvs() laziy only if it is going
to be used and not computed yet.
Change-Id: Iccdbd4c962a670c9f2c99b8aca8096042ca5dc98
Changes to the selection of Q limits for two pass
and two pass CQ mode.
Allowance made for Mode and motion vector costs.
Some refactoring of common code.
For Derf and YT sets CQ mode average improvement
circa 1% (SSIM and Global PSNR).
Some increased tendency to undershoot even when
user CQ not reached.
Patch2: Removed some test code accidentally merged.
Change-Id: Icf74d13af77437c08602571dc7a97e747cce5066
Sync with loopfilter thread just at the beginning of next frame encoding.
This returns control to application faster and allows a better multicore scaling.
When PSNR packets are generated the final filtered frame is needed imediatly
so we cannot delay the sync.
Change-Id: I288d97b5e331d41d6f5bb49d97986fa12ac6f066
Make sure that this header is listed as one of the sources, so that it
will be installed if necessary.
Change-Id: I2427e494488126b179151dc21043c1e2c8ba5991
- Removed fast_fdct4x4_neon and fast_fdct8x4_neon
- Uses now short_fdct4x4 and short_fdct8x4
- Gives ~1-2% speed-up on Cortex-A8/A9
Change-Id: Ib62f2cb2080ae719f8fa1d518a3a5e71278a41ec
Rd and Rm registers should be different in 'mul'. This register
combination results in unpredictable behaviour. GCC will give
a warning and RVCT an error in this case.
Restriction applies only to armv5 targets and not for armv6 and above.
Change-Id: I378d17c51e1f16a6820814fbed43e115aaabb03e
These changes fixes a glitch between the RTP profile and the input
partitions interface. Since there's no way for the user to know the
actual number of partitions, the decoder have to read the
multi_token_paritition bits also when input partitions mode is
enabled.
Included are also a couple of fixes for issues with independent
partitions and uninitialized memory reads.
Change-Id: I6f93b15287d291169ed681898ed3fbcc5dc81837
- Updated walsh transform to match C
(based on Change Id24f3392)
- Changed fast_fdct4x4 and 8x4 to short_fdct4x4 and 8x4
correspondingly
Change-Id: I704e862f40e315b0a79997633c7bd9c347166a8e
Modified original patch If2f07220885c4c3a0cae0dace34ea0e36124f001
according to comments. Scheduled code a little bit to prevent some
interlocks.
Change-Id: I338f02b881098782f82af63d97f042b85e63e902
This commit added a 3 bit index to the bitstream, the index is used to
look into the intra mode coding entropy context table. The commit uses
the mode stats to calculate the cost of transmitting modes using 8
possible entropy distributions, and selects the distribution that
provides the lowest cost to do the actual mode coding.
Initial test show this provides additional .2%~.3% gain over quantizer
adaptive intra mode coding. So the adaptive intra mode coding provides
a total of .5%(psnr) to .6% gain(ssim) combined for all-key-encoding
To build and test, configure with
--enable-experimental --enable-qimode
Change-Id: I7c41cd8bfb352bc1fe7c5da1848a58faea5ed74a
make intra mode coding entropy distribution adaptive to baseQindex, an
encoding test on hd clips with all key frame shows universal gain on
all clips in both .2%(psnr) and (ssim).3%.
To build and test, configure with
--enable-experimental --enable-qimode
Change-Id: Iaa69241b984d4fdd8baa6d77ee78c0140f5ac00a
Patch 1 to Patch 3 is an initial implementation of 8x8 intra prediction
modes, here are with the following assumptions:
a. 8x8 has 4 prediction modes DC, H, V and TM
b. UV 4x4 block use the same mode as corresponding 8x8 area
c. i8x8 modes are enabled for key frame only for now
Patch 4:
d. removed debug code from previous patches
Patch 5:
e. added stats code to collect entropy stats and further cleaned up
Patch 6:
f. changed mode stats code to collect finer stats of modes
Patch 7:
g. normalized i8x8 modes distribution to total at 256 (8bits).
Patch 8:
h. fixed a bug in decoder and removed debug printf output.
Patch 9:
i. more cleanups to address paul's comment
Patch 10:
j. messy rebase/merges to bring the commit up to date.
Tests on HD clips encoded with all key frame showing consistent gain
on all clips and all metrics:~0.5%(psnr) and 0.6%(ssim):
http://www.corp.google.com/~yaowu/no_crawl/i8x8hd_allkey_fixedq.html
To build and test, configure with:
--enable-experimental --enable-i8x8
Change-Id: I9813fe07ae48cab5fdb5d904bca022514ad01e7f
In the "Removed bmi copy to/from BLOCKD" commit, the copy
to the bmi in BLOCKD was eliminated. The clamp_mvs() used
the bmi in BLOCKD, which now contains incorrect values. This
patch fixes this problem.
Change-Id: I8eca1eaf4015052b0b63e90876f7ad321aba7cff
Code all the features for one segment (grouped together)
then all for the next etc. etc. rather than grouping the
data by feature.
Change-Id: I2a65193b3a70aca78f92e855e35d8969d857b6dd
This data structure is now [Segment ID][Features]
rather than [Features][Segment_ID]
I propose as a separate modification to make the experimental
bit stream reflect this such that all the features for a segment
are coded together.
Change-Id: I581e4e3ca2033bdbdef3d9300977a8202f55b4fb
Some basic plumbing added for a range of segment level features.
MB_LVL_* changed to SEG_LVL_* to better reflect meaning.
Change-Id: Iac96da36990aa0e40afc0d86e990df337fd0c50b
