decoding the same invalid keyframe twice would result in a crash as the
second time through the decoder would be assumed to have been
initialized as there was no resolution change. in this case the
resolution was itself invalid (0x6), but vp8_peek_si() was only failing
in the case of 0x0.
invalid-vp80-00-comprehensive-018.ivf.2kf_0x6.ivf tests this case by
duplicating the first keyframe and additionally adds a valid one to
ensure decoding can resume without error.
BUG=b/30593765
Change-Id: If0859035908b7870d67a7f3f646b5a080252eb6d
this fixes a crash in vp9_dec_setup_mi() via
vp9_init_context_buffers() should decoding continue and the decoder
resyncs on a smaller frame
BUG=b/30593752
Change-Id: I9ce8d94abe89bcd058697e8bd8599690e61bd380
WebM files will adjust the display width and height according to the
input pixel aspect ratio. The default pixel aspect ratio is 1:1.
BUG=https://code.google.com/p/webm/issues/detail?id=1005
Change-Id: I23e0a601b7259fa9513cb86110c41b8437769808
niklas_1280_720_30.y4m 60 frames @ 30fps
only a small number of frames are being used; this reduces the test data
download size in non-perf-test cases by >500M.
retain niklas_1280_720_30.yuv for encode+decode perf tests
Change-Id: I56b3433104acd462f952a9554280de5a3ec0b6d2
cm->frame_bufs[].idx values were made consistent in:
61c5e94 Use -1 consistently as invalid buffer idx
update the initialization in swap_frame_buffers() to match.
additionally:
- remove some shadowed variables in the former and marked them volatile
Change-Id: Ie3f9636c405bd822112bb56bd22d28024ae98909
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls.
Current frame parallel decode will only speed up the decoding for frame
parallel encoded videos. For non frame parallel encoded videos, frame
parallel decode is slower than serial decode due to lack of loopfilter
worker thread.
There are still some known issues that need to be addressed. For example:
decode frame parallel videos with segmentation enabled is not right sometimes.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
This reverts commit a18da9760a.
Change-Id: I361442ffec1586d036ea2e0ee97ce4f077585f02
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls. VP9 frame parallel decode is >30% faster than serial
decode with tile parallel threading which will makes devices play 1080P
VP9 videos more easily.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
Change-Id: Ib92eb35851c172d0624970e312ed515054e5ca64
A flush bug is discovered during putting frame parallel decoder
into Android. This test will expose that bug.
Change-Id: Ia047f27972f4da0471649f79f1f91e7695297473
This patch was to fix the vpxdec fuzzing3 test failure. When an
error occurs, setjmp() is invoked, which calls the decoder
removing routine. In multiple thread situation, other threads
could try to access the frame context memory that is already
deallocated, thus causing a segfault.
An invalid unit test was added for this issue.
Change-Id: Ida7442154f3d89759483f0f4fe0324041fffb952
Covers all profiles and input formats. The tests check if the
encode succeeds and if the psnr is sane.
Change-Id: I195a5330debf92562846121819b6eaf961e27c01
Add a test vector to show the cases where segmentation map is preserved
from frome to frame as outlined in the inquiry in issue 761.
Change-Id: I630c6aba27d0d0b109cc7fd7c6fcd008222a0cf3
don't bother decoding any further after receiving an earlier decode
error until a key/intra-only frame is encountered.
Change-Id: I381917b70d7a9e6f8d6de42e3d181bb113a4cec4
allocations within vp9_alloc_context_buffers() rely on mi_rows/mi_cols
individually, use those to determine whether to realloc rather than
stride and stride * rows. this fixes a crash with some fuzzed files for
invalid accesses into last_frame_seg_map and above_context.
Change-Id: I7b9f40dcf170d443890f3bd2acd285507943c7d4
proceeding using a corrupt (incompletely decoded) frame reference may
lead to incorrect assumptions about allocation sizes leading to a crash.
Change-Id: I76e74f2e1be127c2e2c7e1174bb3307497dfd23d
store the number of allocated rows in VP9LfSync, the calculated values
can not be relied on when dealing with corrupt material.
Change-Id: I13b8bcec9738c299a71df726772ab7ac05511e5b
attempting to decode a frame after the previous frame failed has the
potential of interrupting an earlier loop filter task
Change-Id: I6f2b1ddcdf5b89c3e2ee8caf5289dada2a087d66
if the first frame was corrupt and loop filter not called, the next call
would assume the necessary allocations had been done and segfault when
accessing a NULL pointer
Change-Id: Ib6ef505e5c594e6f0fe65ab0700172bcf06b92a6
The issue was introduced by commit g9f37d14 with adding explicit
restrictions on reference-frame scale factors. The restriction
is checked against aligned-by-8 frame dimensions, not against
original ones. So, for example, frame of 35×35 actually can refer
to frame of 70×70, but the new check won't allow this. It will
compare 35 vs 72 (not 70), so 2x downscale limit will be exceeded.
Change-Id: Ic663693034440f64ac8312cbff9e1e773a921060
Separates HBD profile int two profiles (2 and 3) consistent with the
highbitdepth branch. This patch is ported from the original highbitdepth
branch patch: https://gerrit.chromium.org/gerrit/#/c/70460/
Two of the invalid file tests needed to be updated.
Change-Id: I6a4acd2f7a60b1fb4cbcc8e0dad4eab4248431e3
The issue was introduced by commit g7c43fb6. If current frame
is repeated from existing-ref pool, frame buffer ref counter
is not decreased, so buffer isn't released. Decoder fails being
unable to allocate new frame buffer at some point.
Added a test vector to verify that the condition will not
recur later. Test vector was generated by the code in this patch:
https://gerrit.chromium.org/gerrit/#/c/70862/
Change-Id: I8af96eb5b9670176e01a281d2e18bd458712cf78
Also fix bugs related with corrupted frame handling.
Return VPX_CODEC_CORRUPT_FRAME when getting corrupted
block.
Change-Id: I7207ccc7c68c4df2b40b561315d16e49ccf7ff41
This patch fixes bug 633:
https://code.google.com/p/webm/issues/detail?id=633
The first decoded frame does not have to be a keyframe,
it could be an inter-frame that is coded intra-only.
This patch fixes the handling of intra-only frames.
A test vector has also been added that encodes 3
intra-only frames at the start of the clip. The
test vector was generated using the code in the
following patch:
https://gerrit.chromium.org/gerrit/#/c/70680/
Change-Id: Ib40b1dbf91aae2bc047e23c626eaef09d1860147
The y4m extension used is the same as the one used in ffmpeg/x264.
The patch is adapted from the highbitdepth branch.
Also adds unit tests for y4m header parsing and md5 check
of the raw frame data, as well as y4m writing.
[build fix for Mac/VS by not using tuples with strings]
Change-Id: I40897ee37d289e4b6cea6fedc67047d692b8cb46
The y4m extension used is the same as the one used in ffmpeg/x264.
The patch is adapted from the highbitdepth branch.
Also adds unit tests for y4m header parsing and md5 check
of the raw frame data, as well as y4m writing.
Change-Id: Ie2794daf6dbafd2f128464f9b9da520fc54c0dd6
This patch checks that a decoder never tries to reference frame that's
outside the range of 2x to 1/16th the size of this frame. Any attempt
to do so causes a failure.
Change-Id: I5c98fa7bb95ac4f29146f29dd92b62fe96164e4c
the max is 6. there are assumptions throughout the decode regarding
this; fixes a crash with a fuzzed bitstream
$ zzuf -s 5861 -r 0.01:0.05 -b 6- \
< vp90-2-00-quantizer-00.webm.ivf \
| dd of=invalid-vp90-2-00-quantizer-00.webm.ivf.s5861_r01-05_b6-.ivf \
bs=1 count=81883
Change-Id: I6af41bb34252e88bc156a4c27c80d505d45f5642