Propose some changes to the speed 2 settings to improve quality.
In particular, turns off the adjust_thresholds_by_speed feature
which improves results by 6%. Also removes the code for
adjust_thresholds_by_speed since it conflicts with the adaptive
rd thresh feature.
Overall, with this change speed 2 is -15.2% from speed 0 settings,
on derf, which is significantly better than -21.6% down before.
Change-Id: I6e90a563470979eb0c258ec32d6183ed7ce9a505
The c code implementation of 32x32 quantization does the zbin check
of all coefficients prior to the quant/dequant loop, hence removing
the redundant zbin check inside the loop. This only affects the
c code version. SSSE3 version does not separate the zbin check out.
Change-Id: Ic197a7d61d0b25fcac3cc092987651378cb56e4e
If the current obtained distortion is very small, which happens
for static image case, we pick the current partition type without
further split checking.
This won't affect regular videos. For static videos, we got 10%~12%
encoding speed gain. PSNR was better for some clips, and worse for
others. Overall it was even.
Change-Id: If787a57bedf46fc595ca4f5ded2b0c0a69e9fdef
Thank Paul for the suggestions. While turning on static-thresh
for static-image videos, a big jump on bitrate was seen. In this
patch, we detected static frames in the video using first-pass
stats. For different cases, disable encode breakout or reduce
encode breakout threshold to limit the skipping.
More modification need be done to break incorrect partition
picking pattern for static frames while skipping happens.
Change-Id: Ia25f47041af0f04e229c70a0185e12b0ffa6047f
A previous speed feature skipped modes not used in earlier
partitions but this not longer worked as intended following
changes to the partition coding order and in conjunction
with some other speed features (Especially speed 2 and above).
This modified mode skip feature sets a mask after the first X
modes have been tested in each partition depending on the
reference frame of the current best case.
This patch also makes some changes to the order modes are
tested to fit better with this skip functionality.
Initial testing suggests speed and rd hit count improvements
of up to 20% at speed 1. Quality results. (derf -1.9%, std hd +0.23%).
Change-Id: Idd8efa656cbc0c28f06d09690984c1f18b1115e1
Sample app: vp9_spatial_scalable_encoder
vpx_codec_control extensions:
VP9E_SET_SVC
VP9E_SET_WIDTH, VP9E_SET_HEIGHT, VP9E_SET_LAYER
VP9E_SET_MIN_Q, VP9E_SET_MAX_Q
expanded buffer size for vp9_convolve
modified setting of initial width in vp9_onyx_if.c so that layer size
can be set prior to initial encode
Default number of layers set to 3 (VPX_SS_DEFAULT_LAYERS)
Number of layers set explicitly in vpx_codec_enc_cfg.ss_number_layers
Change-Id: I2c7a6fe6d665113671337032f7ad032430ac4197
The 16x16 transform unit test suggested that the peak coefficient
value can reach 32639. This could cause potential overflow issue
in the SSSE3 implmentation of 16x16 block quantization. This commit
fixes this issue by replacing addition with saturated addition.
Change-Id: I6d5bb7c5faad4a927be53292324bd2728690717e
Adds a new end-usage option for constant quality encoding in vpx. This
first version implemented for VP9, encodes all regular inter frames
using the quality specified in the --cq-level= option, while encoding
all key frames and golden/altref frames at a quality better than that.
The current performance on derfraw300 is +0.910% up from bitrate control,
but achieved without multiple recode loops per frame.
The decision for qp for each altref/golden/key frame will be improved
in subsequent patches based on better use of stats from the first pass.
Further, the qp for regular inter frames may also be varied around the
provided cq-level.
Change-Id: I6c4a2a68563679d60e0616ebcb11698578615fb3
mode_info_context was stored as a grid of MODE_INFO structs.
The grid now constists of a pointer to a MODE_INFO struct and
a "in the image" flag. The MODE_INFO structs are now stored
as a stream, eliminating unnecessary copies and is a little
more cache friendly.
For the test clips used, the decoder performance improved
by ~4.3% (1080p) and ~9.7% (720p).
Patch Set 2: Re-encoded clips with latest. Now ~1.7% (1080p)
and 5.9% (720p).
Change-Id: I846f29e88610fce2523ca697a9a9ef2a182e9256
The 32x32 forward transform can potentially reach peak coefficient
value close to 32700, while the rounding factor can go upto 610.
This could cause overflow issue in the SSSE3 implementation of 32x32
quantization process.
This commit resolves this issue by replacing the addition operations
with saturated addition operations in 32x32 block quantization.
Change-Id: Id6b98996458e16c5b6241338ca113c332bef6e70
Moves counting of mv branches to where we have a new mv, instead of after
the whole frame is summed.
Change-Id: I945d9f6d9199ba2443fe816c92d5849340d17bbd
Speed 4 fixed partition size. Use fixed size unless it does not
fit inside image, in which case use the largest size that does.
Change-Id: I250f7a80506750dd82ab355721624a1344247223
This commit fixed the potential overflow issue in the SSE2
implementation of 32x32 forward DCT. It resolved the corrupted
coded frames in the border of scenes.
Change-Id: If87eef2d46209269f74ef27e7295b6707fbf56f9
While static-thresh is on, we only need to transmit skip
flag if skip = 1. The cost of skip bit is added to the
total rate cost.
Change-Id: I64e73e482bc297eba22907026298a15fa8cc3920
Added some code to output normalized rd hit count stats.
In effect this approximates to the average number of rd
operations/tests per pixel for the sequence.
The results are not quite accurate and I have not bothered
to account for partial SB64s at frame edges and for key frames
However they do give some idea of the number of modes /
prediction methods being tested for each pixel across the
different partition sizes. This indicates how much scope their
is for further gains either by reducing the number of partitions
examined or the modes per partition through heuristics.
Patch 3 moved place where count incremented so partial rd
tests that are aborted with INT_MAX return are also counted.
Example numbers for first 50 frames of Akiyo.
Speed 0 ~84.4 rd operations / pixel
Speed 1 ~28.8
Speed 2 ~11.9
Change-Id: Ib956e787e12f7fa8b12d3a1a2f6cda19a65a6cb8
The 32x32 quantization process can potentially have the intermediate
stacks over 16-bit range, thereby causing enc/dec mismatch. This commit
fixes this overflow issue in the SSSE3 implementation, as well as the
prototype, of 32x32 quantization.
This fixes issue 607 from webm@googlecode.
Change-Id: I85635e6ca236b90c3dcfc40d449215c7b9caa806
The two arrays are typically initialized to INT64_MAX, if they are not
filled with valid values before the addition, the values can overflow
and lead to wrong results.
Change-Id: I515de22cf3e8f55af4b74bdb2c8eb821a02d3059
Switching from mi_{width, height}_log2 and b_{width, height}_log2 to
num_8x8_blocks_{wide, high} and num_4x4_blocks_{wide, high}. Removing
redundant code, adding const.
Change-Id: Iaab2207590fd24d0b76999071778d1395dc5cd5d
