If a parent mb is available but is intra coded, then parent_ref_mv is
invalid. Check that the parent is inter coded before trying to access
the parent_ref_mv. Previously the parent_ref_mv was being read from
an uninitialized stack allocation, causing potential OOB reads and
other undefined behavior.
Change-Id: I0c93cd412a19c3a184bcf6decaa145b3a036a6c0
The codec as it stood placed a keyframe one frame after a
real cut scene - and ignored datarate and other considerations.
TODO: Its possible that we should detect a keyframe and recode
the frame ( in certain circumstances) to improve quality.
Change-Id: Ia1fd6d90103f4da4d21ca5ab62897d22e0b888a8
Reset the cyclie refresh mode index in alloc_compressor_data().
This is needed to handle both cases of internal and
external spatial resizing.
Change-Id: I2697e12d45135eae2e8f0d45161811f24722312a
On an internal spatial resize, this mode index was not reset to 0,
and therefore could exceed dimensions of seg_map or cyclic_refresh_map.
Change-Id: I6fe85dbd2765eb0207a9d9f71fda8d8b8c34f075
This should avoid problems with blocks gettings high quality
improvement despite having recently moved:
Change-Id: Ic0af0de2d6577807fa3c553f47b55d547ef36359
Set the seg map to 0 for key frame.
In previous commit on cyclic refresh, the seg map for key frame
was not reset, and instead used the seg map from last frame.
Change-Id: I848eb2face420dfcd2f7daca6f070b9127ca938b
-Increase the amount of mbs to be refreshed.
-Replace the delta qp with a fixed and reduced delta.
-Change to the mb update loop to try to always update same amount of mbs.
Change-Id: I93ac88002fd8dc677d2337f77998ff93f64e4ff9
The denoiser function was modified to reduce the computational
complexity.
1. The denoiser c function modification:
The original implementation calculated pixel's filter_coefficient
based on the pixel value difference between current raw frame and last
denoised raw frame, and stored them in lookup tables. For each pixel c,
find its coefficient using
filter_coefficient[c] = LUT[abs_diff[c]];
and then apply filtering operation for the pixel.
The denoising filter costed about 12% of encoding time when it was
turned on, and half of the time was spent on finding coefficients in
lookup tables. In order to simplify the process, a short cut was taken.
The pixel adjustments vs. pixel diff value were calculated ahead of time.
adjustment = filtered_value - current_raw
= (filter_coefficient * diff + 128) >> 8
The adjustment vs. diff curve becomes flat very quick when diff increases.
This allowed us to use only several levels to get a close approximation
of the curve. Following the denoiser algorithm, the adjustments are
further modified according to how big the motion magnitude is.
2. The sse2 function was rewritten.
This change made denoiser filter function 3x faster, and improved the
encoder performance by 7% ~ 10% with the denoiser on.
Change-Id: I93a4308963b8e80c7307f96ffa8b8c667425bf50
For videos with big static background(such as video conferencing
clips), the mode decision was biased to ZEROMV in order to
obtain a stable background. The percentage of ZEROMV on last
frame was used to predict if there is static area in current frame,
and checking already-encoded neighboring macroblocks' motion
vectors to make sure the local area has low motion.
Change-Id: I05b3241d3a56a0bda88b6681e5646c1c8baf2e57
The current way of counting inter_zz_count doesn't work correctly
in multi-threaded encoding. Calculating it after the frame is
encoded fixed the problem.
Change-Id: Ifcb1972cde950b8cc194f75c6d7b6af09e8b0e65
Loop filter producing wierd artifacts when
repeatedly applied in noisy video. This
mitigates the effect.
Change-Id: If4b1a8543912d186a486f84e11d8b01f7436fa5f
predict_d has become canonical. Remove previous helper function.
Disable ARM assembly pending update.
Change-Id: Idd84ac8a28f9b0221ea97904a77de1e705d06a7d
The sync interval for the multithreaded encoder was considered as not changing
during the encoding. This is not true if picture size is changed.
The encoder could dead-lock because the main thread and the other threads were
using different sync interval.
Change-Id: I75232bbdbc6c02d77f830d870fd8b4e96697c64e
After the picture size was changed to a bigger one, the internal memory was
corrupted and multithreaded encoder was deadlocking.
Memory for last frame's MVs, segmentation map and active map were allocated when
the compressor was created (vp8_create_compressor). Buffers need to be
reallocated when picture size is changed, so, the allocation was moved to
vp8_alloc_compressor_data, which is called every time the picture is resized.
Change-Id: I7ce16b8e69bbf0386d7997df57add155aada2240
The ambient qp and active worse/best qp were reset for every frame
when temporal layers is on. This change removes this reset.
As this affects the target size for forced key frames
(it will actually lower the size somewhat), we increased the
inital boost factor to compensate.
Change-Id: Ie38d95f5c99ab3d447469c49e2177bc3fcc4ad28
SAD returns unsigned values. Make all the declarations the same.
Remove bestsad initialization and check. It is always set to the
result of a SAD call so it will never remain UINT_MAX
Use ja instead of jg to test unsigned comparison instead of signed.
Update test.
Change-Id: I46336ab45f4e60fc37caf20bd36bc5782079c7a5
Precalculated block ptrs do not need updates during encoding.
Set these at init stage.
Moved the allocation of 'mt_current_mb_col' (last encoded MB on each
row) to vp8_alloc_compressor_data(), so that it is correctly
reallocated when frame size is changing.
Change-Id: Idcdaa2d0cf3a7f782b7d888626b7cf22a4ffb5c1
Added drop_frame support in multi-resolution encoder.
If one frame is dropped at a lower-resolution level, the next
upper-resolution level encoder needs to encode that frame
independently without any lower-resolution level motion
information.
Another issue is that if one frame is dropped at some but not all
resolution levels, a frame after that one may use different set
of reference frames at different resolution levels. This reference
frame asynchronization could degrade motion search precision in
upper-resolution level encoding, which uses lower-resolution level
motion result. This change compares the lower-resolution and upper-
resolution level's reference frames. If they are not the same, the
upper-resolution level encoder can not use lower-resolution level
motion result.
Change-Id: I61afa4f313630e75b7cbdd5742e230e8724a988a
xd->subpixel_predict16x16 is called in first pass, but isn't
initialized in first pass, which causes segfault. This patch
fixed that problem.
Change-Id: Ibd2cad4e2d32ea589fc3e0876d60d3079ae836e7
Changes relating to Issue 411
Removed code that was clearing down the segmentation data each
frame.
Added range/parameter checking in vp8_set_roimap(); Return error
if called when cyclic_refresh is enabled.
Correct setup_features() so that it sets or clears the segment update
flags as appropriate.
Change-Id: Ib31ac53006640ddf1ba7b9ec8f8b952e3eff860a
Allows building the library with the gcc -pedantic option, for improved
portabilty. In particular, this commit removes usage of C99/C++ style
single-line comments and dynamic struct initializers. This is a
continuation of the work done in commit 97b766a46, which removed most
of these warnings for decode only builds.
Change-Id: Id453d9c1d9f44cc0381b10c3869fabb0184d5966
Frame dropping decision is made by evaluating both current frame
and next frame's buffer_level. If both buffer_levels are less
than drop_mark, next frame is dropped. When frame dropping is
over, namely, buffer_level becomes normal again, we need to
reset decimation_count to 0.
Change-Id: Iae182612e61e0da367fbd43afdc90738d975d1a3
