Removing tile_rows and tile_columns from VP9Common, removing redundant
constants MIN_TILE_WIDTH and MAX_TILE_WIDTH, changing signature of
vp9_get_tile_n_bits.
Change-Id: I8ff3104a38179b2c6900df965c144c1d6f602267
Making implementation of vp9_set_pred_flag_{seg_id, mbskip} consistent
with vp9_get_segment_id without using confusing sub(a, b) macro. Passing
mi_row and mi_col to functions explicitly instead of replying on
mb_to_right_edge and mb_to_bottom_edge.
Change-Id: I54c1087dd2ba9036f8ba7eb165b073e807d00435
This is a short term optimization till we work out a decoder
implementation requiring no frame border extension.
Change-Id: I02d15bfde4d926b50a4e58b393d8c4062d1be70f
Cycle times:
4x4: 151 to 131 cycles (15% faster)
8x8: 334 to 306 cycles (9% faster)
16x16: 1401 to 1368 cycles (2.5% faster)
32x32: 7403 to 7367 cycles (0.5% faster)
Total encode time of first 50 frames of bus @ 1500kbps (speed 0)
goes from 1min39.2 to 1min38.6, i.e. a 0.67% overall speedup.
Change-Id: I799a49460e5e3fcab01725564dd49c629bfe935f
Also inline some of the block calculations to assist the compiler to
not do silly things like calculating the same offset (or converting
between raster/transform block offset or block, mi and pixel unit)
many, many, many times.
Cycle times:
4x4: 584 -> 505 cycles (16% faster)
8x8: 1651 -> 1560 cycles (6% faster)
16x16: 7897 -> 7704 cycles (2.5% faster)
32x32: 16096 -> 15852 cycles (1.5% faster)
Overall, this saves about 0.5 seconds (1min49.8 -> 1min49.3) on the
first 50 frames of bus (speed 0) @ 1500kbps, i.e. 0.5% overall.
Change-Id: If3dd62453f8e2ab9d4ee616bc4ea956fb8874b80
Skip the inverse transform and reconstruction of inter-mode coded
blocks in the rate-distortion optimization loop, when skip_encode_sb
feature is turned on. This provides about 1% speed-up at speed 0,
and 1.5% speed-up at speed 1. No performance change in both settings.
Change-Id: I2932718bf4d007163702b61b16b6ff100cf9d007
This speed feature allows the encoder to largely remove the spatial
dependency between blocks inside a 64x64 superblock, thereby removing
the need to repeatedly encode superblocks per partition type in the
rate-distortion optimization loop.
A major challenge lies in the intra modes tested in the rate-distortion
optimization loop. The subsequent blocks do not have access to the
reconstructed boundary pixels without the intermediate coding steps.
This was resolved by using the original pixels for intra prediction
in the rd loop, followed by an appropriately designed distortion
modeling on the quantization parameters. Experiments also suggested
that the performance impact is more discernible at lower bit-rate/psnr
settings. Hence a quantizer dependent threshold is applied to deactivate
skip of block coding.
For bus_cif at 2000 kbps,
speed 0: runtime 269854ms -> 237774ms (12% speed-up) at 0.05dB
performance loss.
speed 1: runtime 65312ms -> 61536ms, (7% speed-up) at 0.04dB
performance loss.
This operation is currently turned on in settings of speed 1.
Change-Id: Ib689741dfff8dd38365d8c1b92860a3e176f56ec
this was never fleshed out in the context of VP8, for which it was
added. for VP9 it has no meaning.
Change-Id: Iba2ecc026d9e947067b96690245d337e51e26eff
Implements some of the helper functions more efficiently with
lookups rathers than branches. Modeling function is consolidated
to reduce some computations.
Also merged the two enums BLOCK_SIZE_TYPES and BlockSize into
one because there is no need to keep them separate (even though
the semantics are a little different).
No bitstream or output change.
About 0.5% speedup
Change-Id: I7d71a66e8031ddb340744dc493f22976052b8f9f
For some reason iOS builds take a really long time to sort this
function out.
It's not used anywhere so remove it.
Change-Id: Ia5c8513a0d9c7eb32641cca58ca1c1113e2dd9f4
Adding segmentation struct to vp9_seg_common.h. Struct members are from
macroblockd and VP9Common structs. Moving segmentation related constants
and enums to vp9_seg_common.h.
Change-Id: I23fabc33f11a359249f5f80d161daf569d02ec03
The function encode_block is called only by inter-prediction modes,
hence removing the transform type branching there.
Change-Id: I34a3172e28ce2388835efd0f8781922211bff857
This patch is in experimental but was not merged into master.
This patch swaps ptrs instead of copying and uses the
last show_frame flag instead of setting the entire buffer
to zero.
Change-Id: Ia0950466c8ba301a2a5bf917ff3d07bc1a2c2311
With sf->auto_mv_step_size on it is questionable
whether sf->reduce_first_step_size is worthwhile.
At speed 2 it was not having a big impact.
Even at speed 2 sf->optimize_coefficients = 0 is not
having a big speed imapct so for now I have moved it
down into a higher speed setting.
Change-Id: I8a54de76d486ad37aabce76474889da2768b14c1
This commit fixed the mis-use of the tx_type for inverse transform
in intra4x4 rate-distortion optimization loop. It improves the
overall coding performance.
Change-Id: I7fe9953175b74890357dbcee33c138573766e980
Adds a speed feature to eliminate full-rd computation if the modeled
rd or rd based on a different parameter in the same mode is already
a lot larger than the best rd yet.
Specifically, only search the sharp and smooth filters if the modeled
rd cost based on the regular filter is within a certain factor of the
best rd cost so far. Also, skip full-rd computation of non splitmv
inter modes if the modeled rd cost based on pred error is within the
same factor of the best rd cost so far.
Also adds some enhancements in the rd search for splitmv mode to
speed things up by early breakouts. Negligible impact on performance.
Resuts on derfraw300:
psnr: -0.013% with the splitmv enhancements, -0.24% with the rd
breakout feature on.
speedup: 6% with splitmv enhancements, 20% with also residual breakout
(tested on football sequence at 600 Kbps)
Change-Id: I37abc308ea9f110c1679ce649b6a7e73ab1ad5fc
This commit enables 16x16 ADST/DCT forward hybrid transform using SSE2
operations. It reduces the runtime from 5433 cycles to 1621 cycles, at
no compression performance loss.
Change-Id: I75fd7f1984e9e28846af459f810ff0d6ae125230
Encode time of first 50 frames of bus (speed 0) @ 1500kbps goes from
2min4.9 to 2min3.1, i.e. a 1.4% speedup overall.
Change-Id: I9b25e87974430cb942caa276410bb2eda815bd83
This probably has a mildly negative impact on performance, but will
(in future commits - or possibly merged with this one) allow SIMD
implementations of individual intra prediction functions. We may
perhaps want to consider having separate functions per txfm-size
also (i.e. 4x4, 8x8, 16x16 and 32x32 intra prediction functions for
each intra prediction mode), but I haven't played much with that
yet.
Change-Id: Ie739985eee0a3fcbb7aed29ee6910fdb653ea269
The resulting reconstruction is never used, thus it just wastes CPU
cycles. Reduces encode time of first 50 frames of bus (speed 0) @
1500kbps from 2min2.0 to 2min1.2, i.e. a 0.65% overall speedup.
Change-Id: I74755ca3aadc21e2be220f486259060bd4088c45
Changes cost_mv_ref() into doing a LUT into pre-calculated cost
arrays instead. Encode time of first 50 frames of bus (speed 0)
@ 1500kbps goes from 2min11.6 to 2min10.9, i.e. 0.5% faster overall.
Change-Id: If186e92c34c201b29cbbc058785a15c9c09e433a
First 50 frames of bus @ 1500kbps (speed 0) goes from 2min12.6 to
2min11.6, i.e. 0.75% overall speedup.
Change-Id: I67054f8146e82a02b6457c51a1c8627a937e5e1e
Encode time of first 50 frames of bus (speed 0) @ 1500kbps goes from
2min4.9 to 2min3.1, i.e. a 1.4% speedup overall.
Change-Id: Ibe8b08d159797504c5d0c5122de1b6da3b6595e0
Overall, on all test sets, this gains about +0.2% on all metrics.
City is a clip where this really hurts (-1.0% on all metrics), I'm
not quite sure why yet. Maybe interesting to look into in the future.
Change-Id: I6f0eecb20e72f0194633270d30bf00d76d9eae78
Skips mode searches for intra and compound inter modes depending
on the best mode so far and the reference frames. The various
heuristics to be used are selected by bits from a flag. The
previous direction based intra mode search pruning is also absorbed
in this framework.
Specifically the flags and their impact are:
1) FLAG_SKIP_INTRA_BESTINTER (skip intra mode search for oblique
directional modes and TM_PRED if the best so far is
an inter mode)
derfraw300: -0.15%, 10% speedup
2) FLAG_SKIP_INTRA_DIRMISMATCH (skip D27, D63, D117 and D153
mode search if the best so far is not one of the closest
hor/vert/diagonal directions.
derfraw300: -0.05%, about 9% speedup
3) FLAG_SKIP_COMP_BESTINTRA (skip compound prediction mode
search if the best so far is an intra mode)
derfraw300: -0.06%, about 7-8% speedup
4) FLAG_SKIP_COMP_REFMISMATCH (skip compound prediction search
if the best single ref inter mode does not have the same ref
as one of the two references being tested in the compound mode)
derfraw300: -0.56%, about 10% speedup
Change-Id: I1a736cd29b36325489e7af9f32698d6394b2c495
This commit allows encoder to detect the cumulative rate-distortion
cost per transformed block inside a partition. If the cumulative
rd cost is already above the best rd value, it terminates the rest
operations and continue to next prediction mode test.
It reduces the runtime of bus at target bit-rate 2000 from 308 second
to 266 second, i.e., about 13% speed-up at no performance penalty.
Change-Id: I5f15a3d8955d97031d5653006027866a00654e7a
sf->unused_mode_skip_lvl. Tests modes as normal for all
sizes at or below the given level. At larger sizes it skips
all modes that were not chosen at any smaller size.
Hence setting BLOCK_SIZE_SB64X64 is in effect off.
Setting BLOCK_SIZE_AB4X4 will only consider modes that
were chosen for one or more 4x4 blocks at larger sizes.
sf->reference_masking.
Do a test encode of the NONE partition at one size and create
a reference frame mask based on the best rd choice. In the
full search only allow this reference frame.
Currently it is testing 64x64 and repeats this in the full search.
This does not work well with Jim's Partition code just now and
is disabled by default.
Change-Id: I8f8c52d2ef4a0c08100150b0ea4155d1aaab93dd
This commit adds a speed feature where only squared partition are
evaluated in partition picking. Enable this feature in cpu-used 2
reduces encoding time by ~30%.
loss of compression:
-0.9% on cif set
-1.23% on stdhd
Change-Id: Ia6fad11210f0b78365abb889f9245604513be5b9
If none of the 16 coefficients that we quantize per loop iteration
are larger than the zbin, directly skip to the next round of coeffs,
rather than doing a full quantize loop that will eventually result
in 16 zeroes. This incurs a jump cost, but saves a lot of other work.
32x32 quant goes from 1349 -> 1184 cycles. The same approach yielded
no significantly positive results for smaller transforms, so is not
used there (8x8: 103 -> 101 cycles; 16x16: 302 -> 306 cycles).
Change-Id: I8fca17dc2543fc8eed1dbcd5100145e3c3a9b647
This speed feature will skip searching the directional intra prediction
modes D63, D117, D27, D153 if the best intra mode so far is not one of
the diagonal, horizontal or vertical directions closest to the respective
directions being tested. In other words, this implements a sort of
binary search in the angular domain.
Speedup: about 9-10%
Results: -0.05% only on derfraw300.
Change-Id: I413584c41f2a3e8dabfbdeb40718c8fc4b1d63a2
(1) Refines the modeling function and uses that to add some speed
features. Specifically, intead of using a flag use_largest_txfm as
a speed feature, an enum tx_size_search_method is used, of which
two of the types are USE_FULL_RD and USE_LARGESTALL. Two other
new types are added:
USE_LARGESTINTRA (use largest only for intra)
USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for
inter)
(2) Another change is that the framework for deciding transform type
is simplified to use a heuristic count based method rather than
an rd based method using txfm_cache. In practice the new method
is found to work just as well - with derf only -0.01 down.
The new method is more compatible with the new framework where
certain rd costs are based on full rd and certain others are
based on modeled rd or are not computed. In this patch the existing
rd based method is still kept for use in the USE_FULL_RD mode.
In the other modes, the count based method is used.
However the recommendation is to remove it eventually since the
benefit is limited, and will remove a lot of complications in
the code
(3) Finally a bug is fixed with the existing use_largest_txfm speed feature
that causes mismatches when the lossless mode and 4x4 WH transform is
forced.
Results on derf:
USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction
USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a
pretty good compromise)
USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction
(currently the benefit of modeling is limited for txfm size selection,
but keeping this enum as a placeholder) .
USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing
use_largest_txfm speed feature).
Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
Uses mapping tables instead of complicated modulo/division
operations for prob mapping for forward updates.
No bit-stream or output change.
Change-Id: Ifd9ce8ac1437835c305c94f64c18273c7a68f546
Added a speed feature in speed 1 to disable splitmv for HD (>=720)
clips. Test result on stdhd set: 0.3% psnr loss and 0.07% ssim
loss. Encoding speedup is 36%.
(For reference: The test result on derf set showed 2% psnr loss
and 1.6% ssim loss. Encoding speedup is 34%. SPLITMV should be
enabled for small resolution videos.)
Change-Id: I54f72b94f506c6d404b47c42e71acaa5374d6ee6
Compute the rate-distortion cost per transformed block, and cumulate
the cost through all blocks inside a partition. This allows encoder
to detect if the cumulative rd cost is already above the best rd cost,
thereby enabling early termination in the rate-distortion optimization
search.
Change-Id: I0a856367a9a7b6dd0b466e7b767f54d5018d09ac
Remove the use of sf->comp_inter_joint_search_thresh
from the baseline speed 0. Approx +0.4% on derf.
Change-Id: Icc14db98909830f40e5ac66130d40e78d2e55c71
This cl converts use partition from last frame to do the following:
if part is none,horz, vert -> try split
if part != none and one of the children is not split - try none
Change-Id: I5b6c659e35f3ac9f11c051b92ba98af6d7e8aa87
Signed-off-by: Jim Bankoski <jimbankoski@google.com>
This should significantly speedup cost_coeffs(). Basically what the
patch does is to make the neighbour arrays padded by one item to
prevent an eob check in get_coef_context(), then it populates each
col/row scan and left/top edge coefficient with two times the same
neighbour - this prevents a single/double context branch in
get_coef_context(). Lastly, it populates neighbour arrays in pixel
order (rather than scan order), so we don't have to dereference the
scantable to get the correct neighbours.
Total encoding time of first 50 frames of bus (speed 0) at 1500kbps
goes from 2min10.1 to 2min5.3, i.e. a 2.6% overall speed increase.
Change-Id: I42bcd2210fd7bec03767ef0e2945a665b851df56
Encode time of bus (speed 0) 50 frames @ 1500kbps goes from 2min14.4 to
2min10.1, i.e. a 2.3% overall speed increase.
Change-Id: I3699580e74ec26c7d24e03681bc47ba25ee1ee87
Total encoding time for first 50 frames of bus (speed 0) @ 1500kbps
goes 2min34.8 to 2min14.4, i.e. a 10.4% overall speedup. The code is
x86-64 only, it needs some minor modifications to be 32bit compatible,
because it uses 15 xmm registers, whereas 32bit only has 8.
Change-Id: I2df53770c2e850813ffa713e1a91b45b0082b904
Added a speed feature that focuses only on thresholds
for new motion modes.
Moved sf->comp_inter_joint_search_thresh into speed
1. This has ~+0.4% impact on quality at speed 0 as
our quality reference baseline.
Slight adjustment to baseline thresholds.
Change-Id: I7ebf104f1fe29af77ed4837b2e84be065621bbe5
This commit enables SSE2 4x4 foward hybrid transform. The runtime
goes from 249 cycles down to 74 cycles. Overall around 2% speed-up
at no compression performance change.
Change-Id: Iad4d526346e05c7be896466c05500711bb763660
Makes cost_coeffs() a lot faster:
4x4: 236 -> 181 cycles
8x8: 888 -> 588 cycles
16x16: 3550 -> 2483 cycles
32x32: 17392 -> 12010 cycles
Total encode time of first 50 frames of bus (speed 0) @ 1500kbps goes
from 2min51.6 to 2min43.9, i.e. 4.7% overall speedup.
Change-Id: I16b8d595946393c8dc661599550b3f37f5718896
Adding CHECK_MEM_ERROR macro to vp9_common.h and removing two duplicated
ones from vp9_onyx_int.h and vp9_onyxd_int.h.
Change-Id: I916afec61b3019f18193135dac7c35ed0f89b8b6
Cycle timings for first 3 frames of bus (speed 0) at 1500kbps:
4x4: 298 -> 234 cycles
8x8: 1227 -> 878 cycles
16x16: 23426 -> 18134 cycles
32x32: 4906 -> 3664 cycles
Total encode time of first 50 frames of bus @ 1500kbps (speed 0) goes
from 3min0.7 to 2min51.6 seconds, i.e. 5.3% faster.
Change-Id: I68a0e1b530b0563b84a67342cca4b45146077e95
This commit replaces zrun_zbin_boost, a method of biasing non-zero
coefficients following runs of zero-coefficients to be rounded towards
zero, with an explicit skip-block choice in the RD loop.
The logic is basically that if individual coefficients should be rounded
towards zero (from a RD point of view), the trellis/optimize loop should
take care of it. If whole blocks should be zero (from a RD point of
view), a single RD check is much more efficient than a complete
serialization of the quantization loop.
Quality change: derf +0.5% psnr, +1.6% ssim; yt +0.6% psnr, +1.1% ssim.
SIMD for quantize will follow in a separate patch. Results for other
test sets pending.
Change-Id: Ife5fa641163ac5150ac428011e87188f1937c1f4
This commit change the partition search order to allow checking of
rectangular partition to be done after square partitions. It also
added a speed feature to skip rectangular partition check when
NONE is better than SPLIT in RD sense.
This feature roughly speed up encoder by 1.5X with loss on compression
-0.91% on cif set
-0.56% on stdhd set
Change-Id: I0d2d06993041aa9ea9073fcc39c54f73a127dfa4
Using vp9_set_pred_flag function instead of custom code, adding
decode_tokens function which is now called from decode_atom,
decode_sb_intra, and decode_sb.
Change-Id: Ie163a7106c0241099da9c5fe03069bd71f9d9ff8
Encoding time of first 50 frames of bus @ 1500kbps (speed 0) goes from
3min15.0 to 3min10.9, i.e. 2.1% faster overall.
Change-Id: If592ee99be09bcd34a7c8498347f44e7305e982c
This commit enables configurable reference buffer pointer for intra
predictor. This allows later removal of spatial dependency between
blocks inside a 64x64 superblock in the rate-distortion optimization
loop.
Change-Id: I02418c2077efe19adc86e046a6b49364a980f5b1
Also tweaks to other features and experiments with
what is on and off at different speed settings.
Change-Id: I3e1d0be0d195216bf17c2ac5df67f34ce0b306b2
The aligned array in parameter list caused win32 build to report
c2719 error. This commit fixed the issue by make the parameter
type a pointer instead of an array.
Change-Id: I4ed654ce4eba2db4995d9cdc136c68e9a6acc992
Each frame we reset all adaptive thresholds to MAX
rather than base. As modes are picked their thresholds
drop down.
Change-Id: Ia37f03a73003c2d9bfcda57edea07205e9a0e5e8
Renamed cpi->sf.first_step to cpi->sf.reduce_first_step_size
and changed its meaning such that it is a delta applied to
reduce the default first step size (>> x) in the motion search
rather than an absolute value.
The default first step size is already changed according to the image
dimensions (smaller for smaller images). cpi->sf.reduce_first_step_size
now applies a further correction from the default.
Change-Id: Ia94e08bc24c67b604831f980909af7e982fcd16d
The part where we align it by 8 or 16 is an implementation detail that
shouldn't matter to the outside world.
Change-Id: I9edd6f08b51b31c839c0ea91f767640bccb08d53
Makes first 50 frames of bus @ 1500kbps encode from 3min22.7 to 3min18.2,
i.e. 2.3% faster. In addition, use the sub_pixel_avg functions to calc
the variance of the averaging predictor. This is slightly suboptimal
because the function is subpixel-position-aware, but it will (at least
for the SSE2 version) not actually use a bilinear filter for a full-pixel
position, thus leading to approximately the same performance compared to
if we implemented an actual average-aware full-pixel variance function.
That gains another 0.3 seconds (i.e. encode time goes to 3min17.4), thus
leading to a total gain of 2.7%.
Change-Id: I3f059d2b04243921868cfed2568d4fa65d7b5acd
This commit enables 8x8 DCT and hybrid transform unit tests. It
also tunes the forward hybrid transform rounding opertions for
more precise round-trip performance.
Change-Id: If05c1ce59d75d641b9c6c91527d02d3a6ef498c3
This commit makes use of the butterfly structure to enable the sse2
version implementation of 8x8 ADST/DCT hybrid transform coding.
The runtime of hybrid transform module goes down from 1170 cycles
to 245 cycles. Overall speed-up around 1.5%.
Change-Id: Ic808ffd21ece8a9d0410d8c0243d7b6c28ac3b3f
Change vp9_block_error() to return a 64bit error variable, change all
callers to expect a 64bit return value (this will prevent overflows,
which we basically don't check for at all right now). Remove duplicate
block_error() function, which fixed that through truncation. Remove
old (incompatible) mmx/sse2 block_error SIMD versions and replace with
a new one that returns a 64bit value.
Encoding time of first 50 frames of bus @ 1500kbps goes from 3min29 to
3min23, i.e. a 3% overall speedup.
Change-Id: Ib71ac5508b5ee8a80f1753cd85d72df1629abe68
