Add a test vector to show the cases where segmentation map is preserved
from frome to frame as outlined in the inquiry in issue 761.
Change-Id: I630c6aba27d0d0b109cc7fd7c6fcd008222a0cf3
The concept:
There's too much noise in source pixels for variance and at low bitrate
the reconstructed looks nothing like the source so we have problems
getting good partitionings with either. This skirts the issue by using
a box blur scaled down version for variance calculations. To compare
against source_var_ moved keyframe to be rd based like source_var.
Change-Id: Ie3babdbfadae324b7b5a76bea192893af27f0624
This SSE2 is based on VP8 denoiser's SSE2 code. In VP8, there are
only 16x16 blocks in denoiser, while in VP9, there are 13 different
block sizes.
By adding this SSE2 code, the improvement of encoder speed is around
20%(using C code vs using SSE2 code), vary for different clips.
The unit test for VP9 denoiser is to confirm that the SSE2 code is
bit-exact with the C code. The unit test covers all block size.
Change-Id: Ic8d8ac26db4ea40a5f146b5678a065af07eaaa3d
Incorporates the WRAPLOW macro into the non-highbitdepth transforms
to aid hardware verification between a software C model and an
intended hardware implementation though the use of the configure
options: --enable-experimental --enable-emulate-hardware.
Note that to avoid further discrepancies between the sse/sse2
implementations of the transforms and the C implementation, when the
emulate hardware option is invoked, we also disable sse/sse2/etc.
Also incudes some minor cleanups/renaming etc.
Change-Id: Ib864d8493313927d429cce402982f1c8e45b3287
vpx_svc_parameters_t contains id, resolution and min/max qp for each spatial layer.
In this change we will use extra config to send min/max qp and scaling factors, then calculate layer resolution inside encoder.
Change-Id: Ib673303266605fe803c3b067284aae5f7a25514a
In many tests in VP8, the denoiser is disabled. By adding this
conditional comilation macro, the unit test will not be included
when denoiser is not enabled.
Change-Id: I6edec85c996acca22aacd11161c52408be2660a3
1. This is to align with the ffmpeg implementation
2. Remove APIs for setting quantizers and scale-factors
Change-Id: I6e238d71db790a9fb3254baaeb61e2a5aac58f48
Libvpx was memseting every external frame buffer before decode. This
was to work around a valgrind issue in our C loop filter. Most of
the time this was not needed and we have noticed some significant
performance loss on some platforms. Now we require the application to
zero out the buffers if it is using external frame buffers.
Change-Id: I7330d00a315e65137ed30edd5f813e8929b76242
Adds various high bitdepth transform functions and tests.
Much of the changes are related to using typedefs tran_low_t
and tran_high_t for the final transform cofficients and intermediate
stages of the transform computation respectively rather than fixed
types int16_t/int. When vp9_highbitdepth configure flag is off,
these map tp int16_t/int32_t, but when the flag is on, they map
to int32_t/int64_t to make space for needed extra precision.
Change-Id: I3c56de79e15b904d6f655b62ffae170729befdd8
If optimizations use more than one cpu feature, allow
specifying them so that '--disable-X' still works
https://code.google.com/p/webm/issues/detail?id=854
Change-Id: I3108ea37b397371a2be84dd5f2380b304db23f18
1. svc_encodeframe.c will not handle frame or stats packets anymore.
The app will process them.
2. Remove APIs that related to these packets.
Change-Id: Id0d7f8b458dc09c6f77064c0878fd4e572db001b
don't bother decoding any further after receiving an earlier decode
error until a key/intra-only frame is encountered.
Change-Id: I381917b70d7a9e6f8d6de42e3d181bb113a4cec4
allocations within vp9_alloc_context_buffers() rely on mi_rows/mi_cols
individually, use those to determine whether to realloc rather than
stride and stride * rows. this fixes a crash with some fuzzed files for
invalid accesses into last_frame_seg_map and above_context.
Change-Id: I7b9f40dcf170d443890f3bd2acd285507943c7d4
proceeding using a corrupt (incompletely decoded) frame reference may
lead to incorrect assumptions about allocation sizes leading to a crash.
Change-Id: I76e74f2e1be127c2e2c7e1174bb3307497dfd23d
Calling Reset(int) method instead of overloaded operator()(int).
Adding underscore at the end of class member name.
Change-Id: I01934e7bc056d4b594e5d05d693328febd34ac3c
vp8_build_intra_predictors_mbuv_s().
This patch replaces the assembly version with an intrinsic
version.
On a Nexus 7, vpxenc (in realtime mode, speed -12)
reported a performance improvement of ~2.6%.
Change-Id: I9ef65bad929450c0215253fdae1c16c8b4a8f26f
Adds config parameter vp9_highbitdepth, to support highbitdepth profiles.
Also includes most vpx level high bit-depth functions. However
encode/decode in the highbitdepth profiles will not work until
the rest of the code is in place.
Change-Id: I34c53b253c38873611057a6cbc89a1361b8985a6
It's built based on current spatial svc code.
We only support one spatial two temporal layers at this time.
Change-Id: I1fdc8584354b910331e626bfae60473b3b701ba1
store the number of allocated rows in VP9LfSync, the calculated values
can not be relied on when dealing with corrupt material.
Change-Id: I13b8bcec9738c299a71df726772ab7ac05511e5b
attempting to decode a frame after the previous frame failed has the
potential of interrupting an earlier loop filter task
Change-Id: I6f2b1ddcdf5b89c3e2ee8caf5289dada2a087d66
if the first frame was corrupt and loop filter not called, the next call
would assume the necessary allocations had been done and segfault when
accessing a NULL pointer
Change-Id: Ib6ef505e5c594e6f0fe65ab0700172bcf06b92a6
We can use one frame context for each layer so that we don't have
to reset the probs every frame. But we can't use prev_mi since we
may drop enhancement layers. So we have to generate a non vp9
compatible bitstream and modify it in the player.
1. We need to code all frames as invisible frame to let prev_mi
not to be used. But in the bitstream we need to code the
show_frame flag to 1 so that the publisher will know it's
supposed to be a visible frame.
2. In the player we need to change the show_frame flag to 0 for
all frames. Then add an one byte frame into the super frame
to tell the decoder which layer we want to show.
Change-Id: I75b7304cf31f0ab952f043e33c034495e88f01f3
1. Clean the code for encode frame tests
2. Add encode w/ and w/o alt reference frame test
3. Add encode SNR layers test
4. Add encode multiple layers but decode partial layers test
Change-Id: Ibd2c9bc02525db584a6f931a98405f2d851b3cd6
- Fix nit: make test function definitions match test order.
- Fix nit: use elog instead of echo for env verification error.
Change-Id: I0eec078fc056a5bb2bd88d5833e43de48d77ec08
this test allocates >2GB currently. depending on the order of the test
runs the allocation may fail most regularly with mingw+wine.
Change-Id: Ibee1c18cfbe29a4de6c65075647ec3955d8206c0
- Remove vpxdec and vpxenc from the exclude list.
- vpx{dec,enc}.sh: Updates to support finding their executable when
LIBVPX_BIN_PATH is setup for the examples.
- tools_common.sh: New library function, vpx_tool_path(). Provides
support for finding the exectuables in vpx{dec,enc}.sh.
Change-Id: I730f11cceb44646491a7a7ff58603a4a760129ef
Explicitly makes the fileptr null when close source is called
on a temporary file. This avoids a valgrind error.
Change-Id: I9c364290eeb6842fde946dd9bf817814c7178aaa
check that bitrates increase with cqlevel at global test case teardown,
rather than after each individual test case. this allows the tests to be
run out of order with --gtest_shuffle.
Change-Id: I9e0d4e6a2d920a1f2fe9aee7b7876a3e7eb5d297
'ref_frame_map' is initialized to -1. avoids using an invalid index if
VP9_GET_REFERENCE/VP8_COPY_REFERENCE controls are issued after a decode
error.
Change-Id: I4599762c4d0b07a5943a72bf4a86ccb596cc062a
if the decode of the first frame fails, frame_to_show may not be set.
fixes a crash in vpxdec with corrupt data.
Change-Id: I5ab9476d005778a13fd42a39d05876bb6c90a93c
Reverts to using tmpfile() for non-Windows platforms. On google3
the test directory does not have write permissions, and hence the
Y4mWriteTest fails. This patch fixes the issue.
On Windows, a temporary file is created in the temp directory
that has write permissions.
The tests pass on linux, mingw, and MS visual studio.
Change-Id: Ibada1d80e25d8b8e5b6a9d3d597533674bd9024c
When a valid data pointer is given make sure the size is greater than
zero.
A previous check for vp9 was incorrectly removed in:
7050074 Make the api behavior conform to api spec.
No semantics for valid pointers + 0-sized frames are defined for VPx
codecs, so move the check to vpx_codec_decode(). This avoids an assert
in vp9.
+ add some basic invalid param testing for decoder init/decode/destroy
Change-Id: I99f9cef6076d15874fd72ac973f2685d8a2353c3
- Split vpxenc() into vpxenc() and vpxenc_pipe().
- Drop all but one positional param (the input file) in favor
of passing args directly to vpxenc.
- Add an extra lossless test that explicitly sets min-q and
max-q to 0.
Change-Id: I7d5f7b495f8b9447388c5f459bc9f6de2214caf2
in the sub_pixel_*variance* function the dst is aligned to 16 bytes and not
to 32 bytes - now load unaligned data
Change-Id: I2e0b9745543697efc56fefa32857ea10117af135
A bug in Microsoft compiler was found in the function
vp9_filter_block1d16_v8_avx2 and a workaround applied.
the bug occur when there was 4 consecutive maddubs + min + adds
intrinsic instructions.
Change-Id: I83499faeb70971e650e5663fd2490360ddb1a51b
in the function sad32x32x4d and sad64x64x4d the source is aligned to 16 bytes
and not to 32 bytes - the load is now unaligned.
Change-Id: I922fdba56d0936b5cf72e4503519f185645a168c
When no more data is available, vpx_codec_decode should
be called with NULL as data and 0 as data_sz.
vpx_codec_get_frame iterates over a list of the frames
available for display. The iterator storage should be initialized
to NULL to start the iteration. Iteration is complete when this
function returns NULL.
Also change the unit test to conform to the api spec.
Change-Id: I4b258b309f5df3d37d10c82f01492c0394181c2a
vp9_variance8x8(), and vp9_get8x8var().
On a Nexus 7, vpxenc (in realtime mode, speed -12)
reported a performance improvement of ~1.2%.
Change-Id: I8a66ac2a0f550b407caa27816833bdc563395102
- vp9_spatial_svc_encoder.c no longer supports the -m parameter that
has been used in the example test. Tests using -m have been disabled.
- Added a basic test that appears to work as of commit
3249f26ff8.
- Minor style clean up.
Change-Id: Ic1402fcbbe28e33982c5ea12d1e3349f4069a5bf
- Split vpxdec wrapper function into vpxdec() and vpxdec_pipe().
- Remove hard coded --noblit and --summary arguments from
the wrappers in favor of shifting off the first argument (the
input file) and passing all remaining parameters to vpxdec.
- Add --noblit and --summary args to existing tests, and update the
pipe input test to use vpxdec_pipe().
Change-Id: Ia390a9990eace793058b3603ada733fb878eb78c
