Do mvp clamping in full-pixel precision instead of 1/8-pixel
precision to avoid error caused by right shifting operation.
Also, further fixed the motion vector limit calculation in change:
b7480454706a6b15bf091e659cd6227ab373c1a6
Change-Id: Ied88a4f7ddfb0476eb9f7afc6ceeddbf209fffd7
Separate simple filter with reduced no. of parameters.
MB filter level picking based on precalculated table. Level table updated for
each frame. Inside and edge limits precalculated and updated just when
sharpness changes. HEV threshhold is constant.
ARM targets use scalars and others vectors.
Change works only with --target=generic-gnu
All other targets have to be updated!
Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
Allow the encoder to inform the application that the encoded frame will not
be used as a reference.
Change-Id: I90e41962325ef73d44da03327deb340d6f7f4860
Motion vector limits are calculated using right shifts, which
could give wrong results for negative numbers. James Berry's
test on one clip showed encoder produced some artifacts. This
change fixed that.
Change-Id: I035fc02280b10455b7f6eb388f7c2e33b796b018
In this commit I have added an experimental function
that tests prediction quality either side of a central position
to calculate a suggested boost number for an ARF frame.
The function is passed an offset from the current position and
a number of frames to search forwards and backwards.
It returns a forward, backward and compound boost number.
The new code can be deactivated using #define NEW_BOOST 0
In its current default state the code searches forwards and backwards
from the proposed position of the next alt ref.
The the old code used a boost number calculated by scanning forward
from the previous GF up to the proposed alt ref frame position.
I have also added some code to try and prevent placement of a gf/arf
where there is a brief flash.
Change-Id: I98af789a5181148659f10dd5dd2ff2d4250cd51c
There were many instances in the code of vp8_coef_tokens and
vp8_coef_tokens-1, which was a preprocessor macro despite the naming
convention. Replace these with MAX_ENTROPY_TOKENS and ENTROPY_NODES,
respectively.
Change-Id: I72c4f6c7634c94e1fa066cd511471e5592c748da
With this commit frames can be received partition-by-partition
from the encoder and passed partition-by-partition to the
decoder.
At the encoder-side this makes it easier to split encoded
frames at partition boundaries, useful when packetizing
frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled,
several VPX_CODEC_CX_FRAME_PKT packets will be returned
from vpx_codec_get_cx_data(), containing one partition
each. The partition_id (starting at 0) specifies the decoding
order of the partitions. All partitions but the last has
the VPX_FRAME_IS_FRAGMENT flag set.
At the decoder this opens up the possibility of decoding partition
N even though partition N-1 was lost (given that independent
partitioning has been enabled in the encoder) if more info
about the missing parts of the stream is available through
external signaling.
Each partition is passed to the decoder through the
vpx_codec_decode() function, with the data pointer pointing
to the start of the partition, and with data_sz equal to the
size of the partition. Missing partitions can be signaled to
the decoder by setting data != NULL and data_sz = 0. When
all partitions have been given to the decoder "end of data"
should be signaled by calling vpx_codec_decode() with
data = NULL and data_sz = 0.
The first partition is the first partition according to the
VP8 bitstream + the uncompressed data chunk + DCT address
offsets if multiple residual partitions are used.
Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
Adding support in the encoder for generating
independent residual partitions by forcing
equal probabilities over the prev coef entropy
contexts.
Change-Id: I402f5c353255f3ca20eae2620af739f6a498cd21
I got this idea from Pascal (Thanks). Before encoding a macroblock,
copy it to a 16x16 buffer, and then read source data from there
instead. This will help keep the source data in cache, and help
with the performance.
Change-Id: Id05f4cb601299150511d59dcba0ae62c49b5b757
This reverts commit 212f6183739d448ad5fa2ccf1b4edd30829b2806.
Further testing shows that the overshoot accumulation/damping is too
aggressive on some clips. Allowing the accumulated overshoot to
decay and limiting to damping to golden frames shows some promise.
But some clips show significant overshoot in the buffer window, so
I think this still needs work.
Change-Id: Ic02a9ca34f55229f9cc04786f4fab54cdc1a3ef5
RDMULT/RDDIV defines a bit worth of distortion in term of sum squared
difference. This has also been used as errorperbit in subpixel motion
search, where the distortions computed as variance of the difference.
The variance of differences is different from sum squared differences
by amount of DC squared. Typically, for inter predicted MBs, this
difference averages around 10% between the two distortion, so this patch
introduces a 110% constant in deriving errorperbit from RDMULT/RDDIV.
Test on CIF set shows small but positive gain on overall PSNR (.03%)
and SSIM (.07%), overall impact on average PSNR is 0.
Change-Id: I95425f922d037b4d96083064a10c7cdd4948ee62
The starting points are always within the limits, and bounds
checking on these points is not needed. For speed < 5, the
encoded result changes a little because different treatment
is taken while starting point equals the bounds.
Change-Id: I09a402d310f51e305a3519f1601b1d17b05c6152
Modify the second-pass code to provide a full golden-frame (GF) bit
allocation boost if the past GF group (GFG) had no alt-ref frame (ARF),
even if the current GFG does contain and ARF.
This mostly has no effect on clips, since switching ARFs on/off between
GFGs is not very common. Has a positive effect on e.g. cheer (+0.45 SSIM
at 600kbps) and football (+0.25 SSIM at 600kbps), particularly at high
bitrates. Has a negative effect (-0.04 SSIM at 300kbps) at pamphlet,
which appears only marginally related to this patch, and crew (-0.1 SSIM
at 700kbps).
Change-Id: I2e32899638b59f857e26efeac18a82e0c0b77089
The BPRED mode selection uses SSE as a distortion metric, but the early
breakout threshold being used was a variance value.
Change-Id: I42d4602fb9b548bf681a36445701fada5e73aff1
firstpass.c contains some rate adjustment code that assures that the
last few frames in a sequence abide by rate limits. If the second-to-
last group of frames contains an alt-ref frame (ARF), the last golden
frame (GF) is zero bytes, and we will thus spend a ridiculously high
number of bits on regular P-frames trying to hit the target rate. This
does slightly enhance the quality of these last few frames, but has
no perceptual value (other than hitting the target rate).
Disabling this code means we consistently (slightly) undershoot the
target rate and consequently do worse on the last few frames of a
clip, which is particularly noticeable for small clips. The quality-
per-bitrate is generally better, ~0.2% better overall on derf-set,
especially on clips such as garden, tennis, foreman at low bitrates.
Has a negative effect on hallmonitor at high bitrates.
Change-Id: I1d63452fef5fee4a0ad2fb2e9af4c9f2e0d86d23
Moved encode_intra function from firstpass.c to encodeintra.c to
prevent linking problem in real-time only build. Also changed name
of the function to vp8_encode_intra because it is not a static.
Change-Id: Ibf3c6c1de3152567347e5fbef47d1d39564620a5
Small decode performance gain (~1%) on keyframes. No
noticeable gains on encode. Also changed pick_intra4x4mby_modes()
to read the above and left block modes for keyframes only.
Change-Id: I1f4885252f5b3e9caf04d4e01e643960f910aba5
Since BPRED will be tested at most once, and SPLITMV is not enabled,
there's nothing to clobber the subblock modes, so there's no need to
save and restore them.
Change-Id: I7c3615b69190c10bd068a44df5488d6e8b85a364
In activity masking, RDO constant RDMULT is adjusted on a per MB basis
adaptive to activity with the MB. errorperbit, which is defined as
RDMULT/RDDIV, is a constant used in motion estimation. Previously, in
activity masking, errorperbit is not changed even when RDMULT is changed.
This commit changed to adjust errorperbit according to the change in
RDMULT.
Test in cif set showed a very small but consistent gain by all quality
metrics (average, overall psnr and ssim) when activity masking is on.
Change-Id: I07ded3e852919ab76757691939fe435328273823
