Remove the dependency on postproc.c for the encoder in general, the only
unchecked need for it is when CONFIG_PSNR is enabled. All other cases
are already wrapped in CONFIG_POSTPROC. In the CONFIG_PSNR case the file
will still be included.
Additionally, when VP8_SET_POSTPROC is used with the encoder when post
processing has been disabled an error will be returned.
This addresses issue #153.
Change-Id: Ia6dfe20167f7077734a6058cbd1d794550346089
There was an extremely rare deadlock that happened when one thread
was waiting to start the loop filter on frame n while the other
threads were starting to work on frame n+1.
Change-Id: Icc94f728b3b6663405435640d9a2996735ba19ef
These changes improve the behaviour of the code with
forced key frames sent in by a calling application.
The sizing of the frames is still suboptimal for two pass in
particular but the behaviour is much better than it was.
Change-Id: I35fae610c67688ccc69d11f385e87dfc884e65a1
The main reason for the change was to reduce cycles in the token
decoder. (~1.5% gain for 32 bit) This layout should be more
cache friendly.
As a result of this change, the encoder had to be updated.
Change-Id: Id5e804169d8889da0378b3a519ac04dabd28c837
Note: dixie uses a similar layout
The memory being zeroed in vp8_update_mode_info_border() was just
allocated with calloc, and so the entire function is actually
redundant, but it should be made correct in case someone expects
it to actually work in the future.
Change-Id: If7a84e489157ab34ab77ec6e2fe034fb71cf8c79
The timebase was being set to the value in the Y4M file on each
pass, but only doubled to account for the altref placement on
the first past.
This avoids reseting it on the second pass.
Change-Id: Ie342639bad1ffe9c2214fbbaaded72cfed835b42
--cpu was already implemented for most of our embedded
platforms, this just extends it to x86. Corner case for
Atom processor as it doesn't respond to the --march=
option under icc.
Change-Id: I2d57a7a6e9d0b55c0059e9bc46cfc9bf9468c185
did a test compile with clang and got rid of some warnings that have
been annoying me for a while:
vp8/decoder/detokenize.c: In function 'vp8_init_detokenizer':
vp8/decoder/detokenize.c:121: warning: assignment discards qualifiers from pointer target type
vp8/decoder/detokenize.c:122: warning: assignment discards qualifiers from pointer target type
vp8/decoder/detokenize.c:123: warning: assignment from incompatible pointer type
vp8/decoder/detokenize.c:124: warning: assignment discards qualifiers from pointer target type
vp8/decoder/detokenize.c:125: warning: assignment discards qualifiers from pointer target type
vp8/decoder/detokenize.c:128: warning: assignment discards qualifiers from pointer target type
vp8/decoder/detokenize.c:129: warning: assignment discards qualifiers from pointer target type
vp8/decoder/detokenize.c:130: warning: assignment discards qualifiers from pointer target type
vp8/decoder/detokenize.c:131: warning: assignment discards qualifiers from pointer target type
Change-Id: I78ddab176fe47cbeed30379709dc7bab01c0c2e4
Moving the eob structure allows for a non-struct based
function to handle decoding an entire mb of
idct/dequant/recon data. This allows for SIMD functions
to idct/dequant/recon multiple blocks at once.
SSE2 implementation gives 3% gain on Atom.
Change-Id: I8a8f3efd546ea4e0535f517d94f347cfb737c9c2
The external API exposes the RC initial/optimal/full buffer level in
milliseconds, but this value was truncated internally to seconds. This
patch allows the use of the full precision during the conversion from
time to bits.
Change-Id: If8dd2a87614c05747f81432cbe75dd9e6ed2f04e
move some things around, reorder some instructions
constant 0 is used several times. load it once per call in horiz,
once per loop in vert.
separate saturating instructions to avoid stalls.
just use one usub8 call to set GE flags, rather than uqsub8 followed by
usub8 w/ 0
document some stalls for further consideration
Change-Id: Ic3877e0ddbe314bb8a17fd5db73501a7d64570ec
test cases were causing a crash because the count was being read
incorrectly. after fixing that, noticed that the output was not
matching. fixed that.
Change-Id: Idb0edb887736bd566a3cf6d4aa1a03ea8d20eb27
The C version of the dequant/idct/add function depends on the C
version of the IDCT, but this isn't compiled in on ARM. Since this
code has asm version, we can just remove this file to eliminate the
link error.
Change-Id: I21de74d89d3765a1db2da27292b20727c53178e9
vp8_update_gf_useage_maps() is only used by the encoder. This patch
fixes the ability to build in decode-only or encode-only
configurations.
Change-Id: I3a5211428e539886ba998e09e8abd747ac55c9aa
adds a compile time option: --enable-arm-asm-detok which pulls in
vp8/decoder/arm/detokenize.asm
currently about break even speed wise, but changes are pending to
the fill code (branch and load 3 bytes versus conditionally always
load one) and the error handling. Currently it doesn't handle zero
runs or overrunning the buffer.
this is really just so i don't have to rebase my changes all the
time to run benchmarks - now just need to replace one file!
Change-Id: I56d0e2354dc0ca3811bffd0e88fe1f952fa6c797
asm_offsets contains some definitions which are no longer used. this
was one of them. v6 build works now
Change-Id: If370cfa8acd145de4fead2d9a11b048fccc090df
These copies occurred for each macroblock in the encoder and decoder.
Thetemp MB_MODE_INFO mbmi was removed from MACROBLOCKD. As a result,
a large number compile errors had to be fixed.
Change-Id: I4cf0ffae3ce244f6db04a4c217d52dd256382cf3
The mv_ref and sub_mv_ref token encodings are indexed from NEARESTMV
and LEFT4X4, respectively, rather than being zero-based like the
other token encodings.
Change-Id: I3699c3f84111209ecfb91097c4b900773e9a3ad5
This patch changes a few numbers in the two constant arrays
for quantizer's zerobin and rounding factors, in general to
make the sum of the two factors for any Q to be 128. While
it might be beneficial to calibrate the two arrays for best
quantizer performance, it is not the purpose of this patch.
Normalizing the two arrays will enable quick optimization
of the current faster quantizer, i.e .zerobin check can be
removed.
Change-Id: If9abfd7929bf4b8e9ecd64a79d817c6728c820bd
Replace the exponential search for optimal rounding during
quantization with a linear Viterbi trellis and enable it
by default when using --best.
Right now this operates on top of the output of the adaptive
zero-bin quantizer in vp8_regular_quantize_b() and gives a small
gain.
It can be tested as a replacement for that quantizer by
enabling the call to vp8_strict_quantize_b(), which uses
normal rounding and no zero bin offset.
Ultimately, the quantizer will have to become a function of lambda
in order to take advantage of activity masking, since there is
limited ability to change the quantization factor itself.
However, currently vp8_strict_quantize_b() plus the trellis
quantizer (which is lambda-dependent) loses to
vp8_regular_quantize_b() alone (which is not) on my test clip.
Patch Set 3:
Fix an issue related to the cost evaluation of successor
states when a coefficient is reduced to zero. With this
issue fixed, now the trellis search almost exactly matches
the exponential search.
Patch Set 2:
Overall, the goal of this patch set is to make "trellis"
search to produce encodings that match the exponential
search version. There are three main differences between
Patch Set 2 and 1:
a. Patch set 1 did not properly account for the scale of
2nd order error, so patch set 2 disable it all together
for 2nd blocks.
b. Patch set 1 was not consistent on when to enable the
the quantization optimization. Patch set 2 restore the
condition to be consistent.
c. Patch set 1 checks quantized level L-1, and L for any
input coefficient was quantized to L. Patch set 2 limits
the candidate coefficient to those that were rounded up
to L. It is worth noting here that a strategy to check
L and L+1 for coefficients that were truncated down to L
might work.
(a and b get trellis quant to basically match the exponential
search on all mid/low rate encodings on cif set, without
a, b, trellis quant can hurt the psnr by 0.2 to .3db at
200kbps for some cif clips)
(c gets trellis quant to match the exponential search
to match at Q0 encoding, without c, trellis quant can be
1.5 to 2db lower for encodings with fixed Q at 0 on most
derf cif clips)
Change-Id: Ib1a043b665d75fbf00cb0257b7c18e90eebab95e
