Applies an upper limit on burst bitrate for any
frame. This is to insure that typical encodes for YT
do not produce frames that are so large that they
risk stalling HW implementations. Such frames
could also cause playback problems in SW.
For now the limit is set at 250 bits per MB for 1080P
and larger (with the 1080P limit used for smaller frames).
Setting maxQ, constant quality mode or targeting a
very high bandwidth will have precedence over this limit.
Change-Id: Ie6f776c38b06ac7cec043d034085f4b79ee46a38
To reduce pulsing we now allow an arf just before forced key frames
and at the end of a clip or section (which may be stitched to
another clip or section). However, this does not make sense for
key frames arising from real scene cuts.
Change from original patch reflects other recent changes in regard
to alignment of gf/arf and kf groups.
Change-Id: I074a91d1207e9b3e28085af982f6718aa599775f
Fix miss alignment of the frames contributing to the
error score and bit allocation for gf/arf groups.
Initial results slightly +.
Change-Id: Ie508bdcfdac52e592d48e1f13e01b3551b523deb
Some cleanups on frames_to_key, frames_since_key.
Also removes the unused fixed_q parameters in vp9.
Change-Id: If8743a32c71de30a8d17136477b53d607a7acda8
This patch sets frame types correctly in the new
vp9_get_second_pass_params() function called prior
to encode_frame_to_data_rate() function, so that the
latter function can just work with what is passed to
it. This will allow multiple vp9_get_second_pass_params()
to be created for various encode strategies without
messing with the core encode function.
There is no difference in derf and yt. stdhd/hd are pending.
Change-Id: I70dfb97e9f497e9cee04052e0e8e0c2892eab0c3
In two pass encodes bits are allocated to each frame
according to a modified error score for the frame as a
fraction of the modified error score for the clip or section.
Previously a minimum rate per frame was reserved and
subtracted from the bits allocatable by the two pass code.
The vbr max section rate was enforced by clipping the
actual number of bits allocated.
In this patch the min and max vbr rates are enforced
instead by clipping the modified error scores for each frame
rather than the number of bits allocated.
Small gains for all test sets (psnr and SSIM) ranging from
~ +0.05 for YT psnr up to ~ +0.25 for Std-hd SSIM.
Change-Id: Iae27d70bdd3944e3f0cceaf225bad2e8802833de
Various cleanups and streamlining of interfaces as precursor
to further advancements in rate control.
Pre-encode parameter setting for different use cases:
One-pass, first of 2-pass, second of 2-pass, and Svc
are separated out.
There is no change in output with this change.
Change-Id: Ied8ca7d84d610993776aa30ef263fe20452e0e3e
Take account of the fact that the overlay frame is usually
very cheap so distribute target bits among the other frames.
Change-Id: I120685122e8cbbe75da8d07d02932f7877059867
This will hurt metrics in some cases (particularly for static
clips at low data rates where there is extra overhead, but it
helps smooth transitions around forced key frames between
stitched kf sections.
Change-Id: I7e1026ae0de6c77bba863061e115136d7f283cc0
Slightly reduces the mean tendency to undershoot target
rate in vbr, especially when using the memory less mode
and when recodes are disabled.
The effect is primarily at low q.
Change-Id: I59a593b99522cc7da31b4134d1c8a65f5b7b7c53
Various cleanups and refactoring.
Removes feedback of active worst qaulity and uses last_q
instead to make the interface cleaner. Active worst quality
is now decided only once for a frame being coded in the
beginning based on last_q and other stats. Also, adds other
cleaups on last_q to store also the last_q for altref frames,
and reduces the altref interval a little.
The output does change a little.
derfraw300: +0.224% (global psnr)
stdhdraw250: +0.442% (global psnr)
Change-Id: Ie634cdc032697044c472dd0fe79c109b3e7f9767
Clean up and simplification of both estimate_max_q
variants and only call once per clip/section.
This leads to a more constrained range of Q values
across a clip / section.
Average gains across all 4 test sets:-
PSNR ~0.5% SSIM ~0.3%
Change-Id: If77d5f7bb50939a464e117724f4da5b001c62d70
Removed an adaptive rate correction factor that was having
a negative impact on quality in many clips. This factor
was influencing the Q range available to each frame
independently of the bits allocated to each.
Average results with DISABLE_RC_LONG_TERM_MEM.
derf +0.199, -0.059.
yt +3.957, +3.798
std hd +1.577, +2.140
yt hd +4.127, +4.513
Average results without DISABLE_RC_LONG_TERM_MEM
derf -0.628, -0.665
yt +3.432, +3.015
std hd -0.105, +0.153
yt hd +3.432, +3.015
Change-Id: I45bab6b606f49a442e7b27a6d631f3ffd843bbce
Includes various cleanups.
Streamlines the interfaces so that all rate control state
updates happen in the vp9_rc_postencode_update() function.
This will hopefully make it easier to support multiple
rate control schemes.
Removes some unnecessary code, which in rare cases can casue
a difference in the constrained quality mode output, but
other than that there is no bitstream change yet.
Change-Id: I3198cc37249932feea1e3691c0b2650e7b0c22fc
In the decoder we don't need to save eobs, we can pass eob as an argument.
That's why removing eob arrays from VP9Decompressor and TileWorkerData,
and moving eob pointer from macroblockd_plane to macroblock_plane.
Change-Id: I8eb919acc837acfb3abdd8319af63d1bbca8217a
We only need qcoeff buffers in the encoder. Reducing TileWorkerData struct
and VP9Decompressor struct sizes by 24K.
Change-Id: Id148868461f7ffa3d3dd634b371503ae9c57e207
Moves all rate control variables to a separate structure,
removes some currently unused variables,
moves some rate control functions to vp9_ratectrl.c,
and splits the encode_frame_to_data_rate function.
Change-Id: I4ed54c24764b3b6de2dd676484f01473724ab52b
Since they used in encoder only. This commit also re-order includes
for the files that include vp9_extend.h
Change-Id: I929fc113f2135d3198cd1fc6a17434e5a2f8a459
Explicitly constrain the upper limit of motion search range (in the
unit of full pixel) to be [-1023, +1023]. It is intended to control
the effective motion search range for 4K sequences.
Change-Id: I645539c70885eec0f155781f439d97d333336e88
Overall change (using dual buffer scheme for superblocks of both inter
and intra modes) reduces speed 2 runtime:
bluesky_1080p at 6000kbps: 263553ms -> 257441ms
riverbed_1080p at 8000kbps: 233230ms -> 225308ms.
Change-Id: Idf8d70f768a4b0d97b2a8506372c57b7b4022119
Allocate memory space of dual buffer sets that store the coeff, qcoeff,
dqcoeff, and eobs. Connect the pointers of macroblock_plane and
macroblockd_plane to the actual buffer in use accordingly.
Change-Id: I2f0b5f482ca879fae39095013eaf8901db20a5a4
replaces use of cur_tile_mi_(row|col)_(start|end) by VP9_COMMON, making
it less stateful and more reusable for parallel tile decoding
Change-Id: I1df09382b4567a0e5f4434825d47c79afe2399be
The only case where they were intentionally pointing to different
structures was in mbgraph, and this didn't have the expected behavior
because both of these pointers are used interchangeably through the code
Change-Id: I979251782f90885fe962305bcc845bc05907f80c
This should be similar to what x264 does with --aq-mode 1.
It works well with clips like parkjoy and touhou
(http://x264.nl/developers/Dark_Shikari/LosslessTouhou.mkv).
At low bitrates, the segmentation signaling overhead may negate the
benefits of this feature.
(PGW) Default changed to feature OFF to allow provisional merge.
Change-Id: I938abf9bb487e1d4ad3b0264ea03d9826275c70b
Use b_mode_info to store the inter prediction mode of sub8x8 block,
in replacement of the use of partition_info. Remove redundant buffer
update for partition_info. For bus_cif at 2000 kbps, this seem to make
speed 0 about 1% faster.
Change-Id: Id1b3be45e75a24fb4b42335ac480c23e440978f6
Both first pass and mbgraph search use block size 16x16 for motion
estimation. This commit put a limit of motion vector range. The
effective range allows the entire 16x16 with required subpel
interpolation input to be completely outside image border, but
not any further away from image border.
Change-Id: Id70a5ed08be49e70959f064859d72adc7d775d08
Adds modeled functions to decide the qp for altref frames in constant q
mode similar to other functions in use in bitrate mode.
Also turns on the constrained quality mode (end-usage=2) option which
was turned off before. Basic testing shows the mode works in principle,
to cap bitrate to the target-bitrate specified, while allowing lower
bitrate depending on the cq-level specified. The mode will need to be
improved over time.
Results for constant quality vs bitrate control mode:
derfraw300/fullderfraw: +3.0% at constant quality over bitrate control.
fullstdhdraw: +4.341%
stdhdraw250: +5.361%
Change-Id: If5027c9ec66c8e88d33e47062c6cb84a07b1cda9
mode_info_context was stored as a grid of MODE_INFO structs.
The grid now constists of pointers to MODE_INFO structs. The
MODE_INFO structs are now stored as a stream (decoder only),
eliminating unnecessary copies and is a little more cache
friendly.
Change-Id: I031d376284c6eb98a38ad5595b797f048a6cfc0d
Thank Paul for the suggestions. While turning on static-thresh
for static-image videos, a big jump on bitrate was seen. In this
patch, we detected static frames in the video using first-pass
stats. For different cases, disable encode breakout or reduce
encode breakout threshold to limit the skipping.
More modification need be done to break incorrect partition
picking pattern for static frames while skipping happens.
Change-Id: Ia25f47041af0f04e229c70a0185e12b0ffa6047f
Adds a new end-usage option for constant quality encoding in vpx. This
first version implemented for VP9, encodes all regular inter frames
using the quality specified in the --cq-level= option, while encoding
all key frames and golden/altref frames at a quality better than that.
The current performance on derfraw300 is +0.910% up from bitrate control,
but achieved without multiple recode loops per frame.
The decision for qp for each altref/golden/key frame will be improved
in subsequent patches based on better use of stats from the first pass.
Further, the qp for regular inter frames may also be varied around the
provided cq-level.
Change-Id: I6c4a2a68563679d60e0616ebcb11698578615fb3
mode_info_context was stored as a grid of MODE_INFO structs.
The grid now constists of a pointer to a MODE_INFO struct and
a "in the image" flag. The MODE_INFO structs are now stored
as a stream, eliminating unnecessary copies and is a little
more cache friendly.
For the test clips used, the decoder performance improved
by ~4.3% (1080p) and ~9.7% (720p).
Patch Set 2: Re-encoded clips with latest. Now ~1.7% (1080p)
and 5.9% (720p).
Change-Id: I846f29e88610fce2523ca697a9a9ef2a182e9256
Removing unused constants, macros, and function declarations. Using
ROUND_POWER_OF_TWO macro, vp9_zero, vp9_copy where possible. Moving
#include from *.h to *.c. Merging for loops for motion vectors.
Change-Id: Ic3bf841764a2bb177128bb3a6d7aa8f68229cd13
This prevents a duplicate memcpy of a 128-byte struct every time
set_scale_factors() is called (which is a lot), thus leading to a
decrease from 3.7 MB to 1.85 MB of struct copying per 64x64 block
RD/partition loop.
Overall, this decreases encoding time of the first 50 frames of bus
@ 1500kbps (speed 0) from 1min5.9 to 1min4.9, i.e. about a 1.5%
overall speedup. We can likely get more gains by removing the copy
of the other struct (and replacing it with an indexing) as well.
Change-Id: I3dceb7e79f71e6fe911b11cc994cf89a869dde7a
Implements some of the helper functions more efficiently with
lookups rathers than branches. Modeling function is consolidated
to reduce some computations.
Also merged the two enums BLOCK_SIZE_TYPES and BlockSize into
one because there is no need to keep them separate (even though
the semantics are a little different).
No bitstream or output change.
About 0.5% speedup
Change-Id: I7d71a66e8031ddb340744dc493f22976052b8f9f
Code intra/inter, then comp/single, then the ref frame selection.
Use contextualization for all steps. Don't code two past frames
in comp pred mode.
Change-Id: I4639a78cd5cccb283023265dbcc07898c3e7cf95
It remains as a local define in rdopt.c so we can distinguish between
split and non-split modes in the RD loop, but disappears outside that
scope in the codec.
Change-Id: I98c18fe5ab7e4fbd1d6620ec5695e2ea20513ce9
Adds a subsampling aware border extension function. This may be reworked
soon to support more than 3 planes.
Change-Id: I76b81901ad10bb1e678dd4f0d22740ca6c76c43b
Always initialize the mode_info with sb_type of BLOCK_SIZE_MB16X16
for the first-pass encoding test.
Change-Id: Ic86393eeef981bdd523a5b44cfac3f0b24c068b7
