Set adaptive_row_thresh_mt = 1 at speed >= 7,
for svc when multi-threading is used with row-mt.
This allow the adaptive_rd_thresh feature to be used
in the nonrd-pickmode.
~1-2% speedup for SVC encoding with small quality
loss (< 0.6%) on RTC set.
Change-Id: Iab9878dff117bccdaef3e4d0645165db9808cdfc
Note this change will trigger the different C version on SSSE3 and
generate different scaled output.
Its speed is 2x compared with the version calling vpx_scaled_2d_ssse3().
Change-Id: I17fff122cd0a5ac8aa451d84daa606582da8e194
Small inncrease the sad_thresh1, avoids some false
detection of possible scene changes within lag.
Small improvement in few clips on ytlive, otherwise neutral change.
Change-Id: Ia79b53bb657bbce65a7aac7d20666b6373d5af8b
Expose the threshold for setting key frame on cut,
and increase it for speed 5.
Also small adjustment to min_thresh.
No change in overall metrics or fps.
Small quality improvement and lower encode time on scene cuts.
Change-Id: I36e06ff3b26b6c29aede39c23fce454525fc9026
The initial allocation of bits in the two pass code to each frame
should be within the min max limits on the command line. However,
when forming an ARF group the cost of the ARF is shared by frames
in that group such that the residual bits for a frame could drop below
the min value. This change prevents the minimum being re-applied
after the cost of the ARF has been deducted as this may otherwise
cause low rate sections to overshoot their target.
Test runs comparing to a baseline run with min and max section pct
0-2000% vs one closer to the YT use case (50-150%) suggest that
this fix not only results in better rate control but also gives a better
rd outcome.
For example the HD set vs 0-2000% baseline (opsnr, ssim).
Old code (50-150): +0.751, +1.099
New code(50-150): +0.241, -0.009
Change-Id: I715da7b130bf53ba8aa609532aa9e18b84f5e2ef
For 1 pass vbr: use higher threshold on avg_sad
and force key frame under scene cut detection if
above the threshold. Allow it for speed >= 6 for now,
since it does not use the full nonrd_pickmode partition
(as in speed 5).
Improves quality somewhat on scene cut frames.
Neutral on overall metrics and fps for speed 6 on
ytlive set.
Change-Id: I12626f7627419ca14f9d0d249df86c7104438162
Change to the bit allocation within a GF/ARF group.
Normal VBR and CQ mode allocate bits to a GF/ARF group based of the mean
complexity score of the frames in that group but then share bits evenly between
the "normal" frames in that group regardless of the individual frame complexity
scores (with the exception of the middle and last frames).
This patch alters the behavior for the experimental "Corpus VBR" mode such that
the allocation is always based on the individual complexity scores.
Change-Id: I5045a143eadeb452302886cc5ccffd0906b75708
This patch makes further changes to support an experimental
corpus wide VBR mode that uses a corpus complexity
number as the midpoint of the distribution used to allocate bits
within a clip, rather than some average error score derived from the
clip itself.
At the moment the midpoint number is hard wired for testing and
the mode is enabled or disabled through a #ifdef. Ultimately this
would need to be controlled by command line parameters.
Change-Id: I9383b76ac9fc646eb35a5d2c5b7d8bc645bfa873
This reverts commit 9311ef18b4.
Reason for revert:
Notice small regression in some clips.
Will revisit in another change.
Original change's description:
> Speed >=5 real-time: add TM intra mode for high_source_sad.
>
> Small/neutral change in metrics or speed for ytlive.
> Some improvement in quality on frames with big content change.
>
> Change-Id: Ib3b0703a5f28ea6710e90324436e27598ab7384d
TBR=marpan@google.com,builds@webmproject.org,jianj@google.com
Change-Id: I9d8ec5195bb05ddf329d325699355185affb9b13
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
For 1 pass vbr: increase min_thresh slightly, and also add
condition on golden/arf update for using full nonrd_pick_partition.
Reduces possible false detection for scene cut detection.
Neutral/small change in metrics or speed for speed 5.
Change-Id: I388f4d9a56e3cc763e0148338c1bc0381e58ad76
Small/neutral change in metrics or speed for ytlive.
Some improvement in quality on frames with big content change.
Change-Id: Ib3b0703a5f28ea6710e90324436e27598ab7384d
Lower SAD threshold to select non_rd pickmode partition
at superblock level more often.
Small gain in metrics, small/negligible decrease in speed.
Change-Id: I0f728236b91a604e4ca7e02039adc54d5985c4dc
For 1 pass vbr speed >= 6: when REFERENCE_PARTITION is selected,
avoid doing the full nonrd_pickmode based partition.
No change in overall metrics or speed.
Reduces encode times on scene cuts by 10-20%.
Change-Id: I0310b1610cc1c83793a509e0a9059840e8f18308
For 1 pass vbr mode:
On no-show_frame/ARF: instead of skipping alt_ref_frame
completely in mode testing, allow for checking (0, 0) on alt_ref.
Small gain in metrics, ~0.18%, no change in speed.
Change-Id: I32a3c24faca64ab70dd5091071a0dc301db7dd1e
For 1 pass vbr: when significant content/scene change is detected
(high_source_sad = 1) reduce/turnoff the additional qdelta on the
active_worst_quality. This helps somewhat to reduce the occurrence
of large frame sizes and large encode times.
Allow it only when use_altef_onepass is enabled.
Neutral/no change on metrics.
Change-Id: I1dd97dd2ab892d65f707b841b27a5de300b714ea
For speed 6 real-time mode: use adapt_partition
on ARF frame instead of REFERENCE_PARTITION (which is slower).
This requires enabling compute_source_sad_onepass for no-show_frames.
Speedup of ~3-5% on some clips that heavily use ARF,
small loss (~0.2%) in quality on ytlive set.
Change-Id: Ib50acc97df06458244a6ac55d2bd882c30012536
Speed comparing with the one calling vpx_scaled_2d_neon()
~1.7 x in general
~2.8x for BILINEAR filter
BUG=webm:1419
Change-Id: I8f0a54c2013e61ea086033010f97c19ecf47c7c6
Scale 3x3 block instead of 16x16 block in each loop. Disabled by
default.
Benefits:
1. Reduced number of different phase_scaler from 16 to 3.
Optimization code will be smaller and faster.
2. Maximum phase_scaler drifting will be reduced from 5/16 to 1/24.
(The drifting is 1/(3*16) in each step.)
BUG=webm:1419
Change-Id: I59a1f7496d89a1b090498c935d30cfcf1d0c282b
For real-time mode. Move the switch to fixed partition
for is_src_frame_alt_ref so all speeds may use it
if use_altref_onepass is set.
Improves metrics by ~2% for ytlive set at speed 4
(where use_altref_onepass is currently used).
Change-Id: I033240386598c9dbd0364da89ccbcca64bc663ee
Only has effect when sf->use_altref_onepass is enabled,
as in that case scene detection is skipped for non-show frame
and so high_source_sad does not get reset to 0.
No change in metrics or speed.
Change-Id: I421f066d239341449c18826089e1810b9fc5967f
Add stats for past ARF usage, and use it to disable
ARF usage based on some conditions.
Overall improvement on ytlive set, reduces the regression
on the problem clips for this feature.
Only affects when sf->use_altref_onepass is enabled
(currently off by default).
Change-Id: I66267f227ea132dc86acb730e9882f85bead2cdb
This reverts commit 535b7b915a.
This is actually used in CBR to reset the rate control if high source sad is detected.
Original change's description:
> Remove the speed condition on scene detection in 1 pass code.
>
> Scene detection is used for VBR mode and for screen_content mode.
>
> It was also enabled for CBR mode via the speed condition,
> but currently the analysis in the scene detection is not used
> in CRB mode (similar computations are done locally at superblock level
> when the source_sad feature is enabled).
>
> For 1 pass code.
> No change in behavior. Small speed gain, ~0.5%.
>
> Change-Id: I59991d7ef2af320bea7af4b907596e057affa42f
TBR=marpan@google.com,builds@webmproject.org,jianj@google.com
Change-Id: Ib4e6b02047f75632503e7b0fc870af97fa9291c3
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Scene detection is used for VBR mode and for screen_content mode.
It was also enabled for CBR mode via the speed condition,
but currently the analysis in the scene detection is not used
in CRB mode (similar computations are done locally at superblock level
when the source_sad feature is enabled).
For 1 pass code.
No change in behavior. Small speed gain, ~0.5%.
Change-Id: I59991d7ef2af320bea7af4b907596e057affa42f
* changes:
Remove the unnecessary cast of (int16_t)cospi_{1...31}_64
Remove the unnecessary upcasts of (int)cospi_{1...31}_64
Change cospi_{1...31}_64 from tran_high_t to tran_coef_t
