In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls.
Current frame parallel decode will only speed up the decoding for frame
parallel encoded videos. For non frame parallel encoded videos, frame
parallel decode is slower than serial decode due to lack of loopfilter
worker thread.
There are still some known issues that need to be addressed. For example:
decode frame parallel videos with segmentation enabled is not right sometimes.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
This reverts commit a18da9760a.
Change-Id: I361442ffec1586d036ea2e0ee97ce4f077585f02
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls. VP9 frame parallel decode is >30% faster than serial
decode with tile parallel threading which will makes devices play 1080P
VP9 videos more easily.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
Change-Id: Ib92eb35851c172d0624970e312ed515054e5ca64
This commit enables sub8x8 inter block coding for RTC mode. The
use of sub8x8 blocks can be turned on by allowing
choose_partitioning function to select 4x4/4x8/8x4 block sizes.
Change-Id: Ifbf1fb3888fe4c094fc85158ac3aa89867d8494a
This commit explicitly set the second reference frame type to be
NONE in key frame coding mode. This fixes a subtle dependency of
reference motion vector used by next inter frame on mode_info
reset before key frame coding.
Change-Id: I5ff0359753fdc9992b0bfe889490f7a32d7d5f6a
Where there is very subtle motion, especially when combined
with low spatial complexity, the codec sometimes fails to quickly
pick up the ambient motion field.
Once it has been established though the field propagates well using
Nearest and Near MV.
This patch looks specifically at the case where the Nearest and Near
have not been established as non zero vectors and in this case
discounts the cost of searching for a new vector in the rd code.
This will almost certainly have some implications in terms of encode
speed but it should be possible to mitigate the impact in a subsequent
using first pass stats and the local spatial complexity.
Average results for test sets approximately neutral.
Change-Id: I44a29e20f11f7ab10f8c93ffbdc50183d9801524
These speed-up features for key frame coding are only turned on
in the settings of hybrid non-RD and RD mode decision. It provides
about 20% speed-up to the hybrid key frame coding at the expense
of certain compression performance loss. For vidyo1, the key frame
coding statistics are changed
9838F, 35.020 dB, 61677 us -> 9920F, 34.834 dB, 47556 us
Overall rtc set compression performance is down by -0.257%.
Change-Id: I0025447fda26bb7855e982955642b5f55d71b51f
This patch modified struct VP9_COMP. Created a struct ThreadData
to include data that need to be copied for each thread. In
multiple thread case, one thread processes one tile. all threads
share one copy of VP9_COMP,
(refer to VP9_COMP *cpi in the code)
but each thread has its own copy of ThreadData,
(refer to ThreadData *td in the code).
Therefore, within the scope of encode_tiles(), both cpi and td
need to be passed as function parameters.
In single thread case, the FRAME_COUNTS pointer in ThreadData
points to "counts" in VP9_COMMON.
Change-Id: Ib37908b2d8e2c0f4f9c18f38017df5ce60e8b13e
Similar to mask_filter, the filter_cache in RD_OPT struct can be
moved out, and declared as a local variable since it is only
used in pick_inter_mode functions.
Change-Id: I412b99cca82bade07ac912064ec03dd1de6b2c17
The mask_filter in RD_OPT struct is used to record rd result in
filter decision. It is only used in pick_inter_mode functions,
and is removed from the struct and declared as a local variable.
Change-Id: I3c95c8632ba7241591ce00ef2ef5677b5e297d7b
Modified VP9_COMP struct to include MACROBLOCK *mb. This change
makes it feasible in multi-thread case to allocate a mb for each
thread.
Change-Id: I624d6d1aa9c132362200753e5d90b581b1738d6e
This patch allocated frame contexts outside VP9_COMMON. This allows
multiple threads to share the same copy of frame contexts, and
reduces the overhead. It also guarantees the correct update of
these contexts during bitstream packing. This patch doesn't change
encoding result.
Change-Id: Ic181a2460b891d1d587278a6d02d8057b9dbd353
Using 4 threads, frame parallel decode is ~3x faster than single thread
decode and around 30% faster than tile parallel decode for frame parallel
encoded video on both Android and desktop with 4 threads. Decode speed is
scalable to threads too which means decode could be even faster with more threads.
Change-Id: Ia0a549aaa3e83b5a17b31d8299aa496ea4f21e3e
When early termination is triggered, properly reset the rate cost
to invalid value to avoid potential ioc issue.
Change-Id: I3444390be2e49a34bb02cf8a74c33d5dbd96d88d
This commit fixes an ioc issue that will happen when the cumulative
variables are not in effective use. The fix discards these
redundant additions.
Change-Id: Idbac5bfb989c0cedc5f8a323effce938519b2457
This commit makes a struct that contains rate value, distortion
value, and the rate-distortion cost. The goal is to provide a
better interface for rate-distortion related operation. It is
first used in rd_pick_partition and saves a few RDCOST calculations.
Change-Id: I1a6ab7b35282d3c80195af59b6810e577544691f
- Some fixes to surface fit.
- Returns variance function as cost rather than sad in the
pattern search and diamond search functions. Only
vp9_pattern_search_sad function used in bigdia search
uses sad as integer 1-away costs.
- Deploys SUBPEL_TREE_PRUNED_MORE for speed 4+.
Results:
derf [Speed 3]: About +0.036% in coding efficiency without any
discernible speed loss.
derf [Speed 4]: About 2-3% faster at -0.199% loss in coding efficiency.
derf [Speed 5]: About 3-4% faster at -0.149% loss in coding efficiency.
Change-Id: I8462f94f6adb46966ca964f2bd0400977357fd63
In model_rd_for_sb function, the spatial domain SSE and variance
are checked to see if transform coefficients are quantized to 0.
Besides that, this patch adds another set of thresholds that are
much more strict. These thresholds are used to conduct a partition
block level check to measure if all its TX blocks are skippable
for YUV planes. If it is true, x->skip is set for this partition
block, and thus its mode search is terminated.
This speeds up the encoding at very low prediction error case,
such as screen sharing application. This patch covers what
rd_encode_breakout_test() does, so that function is removed.
Borg test at speed 3 shows:
For stdhd set, psnr: +0.008%, ssim: +0.014%;
For derf set, psnr: +0.018%, ssim: +0.025%.
No noticeable speed change.
Change-Id: I4e5f15cf10016a282a68e35175ff854b28195944
Fixed an encoder crash. Set skip_txfm to 0 for cases that skip_txfm
isn't calculated. Put memcpy of skip_txfm at right place.
Change-Id: Ib3b6afc1b251a85b2a853c8138fb3393f48cfef6
