allows 'make test_libvpx', etc. some reworking of the makefiles would be
needed to avoid hard coding targets here.
Change-Id: I18982dbf691e7d36ab8bcf5934bab9340687b061
(cherry picked from commit 25085a6ac21fc8e2341b92e2f1f14d5a7fef30c6)
remove some (but not all yet!) tuple mis-use, and revamp the code a lot.
Factorize some common chores into MainTestClass.
Change-Id: Id37b7330eebe80d19b9d12a454f24ff9be6b1116
Set adaptive_rd_thresh to 0 at speed 0. This allows a thorough mode
search, and eliminates a blocking artifact seen in an encoder test.
Borg test:
1. lowres
Overall PSNR: -0.135%; SSIM: -0.293%;
2. hdres
Overall PSNR: -0.122%; SSIM: -0.208%;
Encoder speed tests: 2% - 6% slower.
Change-Id: Ie7601cb8824df8f6f2ae0b2942bd938600f76990
Added a new expt rect-tx to be used in conjunction with ext-tx.
[rect-tx is a temporary config flag and will eventually be
merged into ext-tx once it works correctly with all other
experiments].
Added 4x8 and 8x4 tranforms for use initially with rectangular
sub8x8 y blocks as part of this experiment.
There is about a -0.2% BDRATE improvement on lowres, others pending.
When var-tx is on rectangular transforms are currently not used.
That will be enabled in a subsequent patch.
Change-Id: Iaf3f88ede2740ffe6a0ffb1ef5fc01a16cd0283a
- HBD encoder speed improvement (SSE4.1):
Enable CONFIG_VP9_HIGHBITDEPTH, on Xeon E5-2680,
50 frames, park_joy_1080p, 12-bit,
Encoding time reduces from 4846481 to 4177471 (ms)
- Add unit test to verify bit-exact and EOB calculation
Change-Id: I08e8ef3549ddad5ab36d86e78557df3b288537ea
Currently nothing is implemented to compute GM parameters, this
just adds the capability to send them in the bitstream if they
were computed. Still need to implement the reconstruction
based on the parameters in reconinter.
Change-Id: I72aea3c6a9de9f5a40f96da76c82b54a52781fe2
ARF with zero strength temporal filter can be reused by setting the
show_existing_frame = 1, and in this case, there is no need to
refresh the reference frame buffer. However, we used the flag
"refresh_golden_frame" as the identifier for the starting point of a gf
group.
A new flags "is_arf_filter_off" is used to record if the filter with
strengrh zero is used.
Change-Id: I25971a760f6e1638d5147fe30488c48125512b1a
Keep track of the best and second best full pixel motion vector
candidates, and do subpel search around both of them.
Compression improvement:
lowres 0.22% midres 0.23% hdres 0.18%
No noticeable encoding speed changes observed on lowres test clips.
Change-Id: I5f4df2a03d1db061cfdfdba6138b27e9ea91f089
This commit bring all up-to-date changes from master that are
applicable to nextgenv2. Due to the remove VP10 code in master,
we had to cherry pick the following commits to get those changes:
Add default flags for arm64/armv8 builds
Allows building simple targets with sane default flags.
For example, using the Android arm64 toolchain from the NDK:
https://developer.android.com/ndk/guides/standalone_toolchain.html
./build/tools/make-standalone-toolchain.sh --arch=arm64 \
--platform=android-24 --install-dir=/tmp/arm64
CROSS=/tmp/arm64/bin/aarch64-linux-android- \
~/libvpx/configure --target=arm64-linux-gcc --disable-multithread
BUG=webm:1143
vpx_lpf_horizontal_4_sse2: Remove dead load.
Change-Id: I51026c52baa1f0881fcd5b68e1fdf08a2dc0916e
Fail early when android target does not include --sdk-path
Change-Id: I07e7e63476a2e32e3aae123abdee8b7bbbdc6a8c
configure: clean up var style and set_all usage
Use quotes whenever possible and {} always for variables.
Replace multiple set_all calls with *able_feature().
Conflicts:
build/make/configure.sh
vp9-svc: Remove some unneeded code/comment.
datarate_test,DatarateTestLarge: normalize bits type
quiets a msvc warning:
conversion from 'const int64_t' to 'size_t', possible loss of data
mips added p6600 cpu support
Removed -funroll-loops
psnr.c: use int64_t for sum of differences
Since the values can be negative.
*.asm: normalize label format
add a trailing ':', though it's optional with the tools we support, it's
more common to use it to mark a label. this also quiets the
orphan-labels warning with nasm/yasm.
BUG=b/29583530
Prevent negative variance
Due to rounding, hbd variance may become negative. This commit put in
check and clamp of negative values to 0.
configure: remove old visual studio support (<2010)
BUG=b/29583530
Conflicts:
configure
configure: restore vs_version variable
inadvertently lost in the final patchset of:
078dff7 configure: remove old visual studio support (<2010)
this prevents an empty CONFIG_VS_VERSION and avoids make failure
Require x86inc.asm
Force enable x86inc.asm when building for x86. Previously there were
compatibility issues so a flag was added to simplify disabling this
code.
The known issues have been resolved and x86inc.asm is the preferred
abstraction layer (over x86_abi_support.asm).
BUG=b:29583530
convolve_test: fix byte offsets in hbd build
CONVERT_TO_BYTEPTR(x) was corrected in:
003a9d2 Port metric computation changes from nextgenv2
to use the more common (x) within the expansion. offsets should occur
after converting the pointer to the desired type.
+ factorized some common expressions
Conflicts:
test/convolve_test.cc
vpx_dsp: remove x86inc.asm distinction
BUG=b:29583530
Conflicts:
vpx_dsp/vpx_dsp.mk
vpx_dsp/vpx_dsp_rtcd_defs.pl
vpx_dsp/x86/highbd_variance_sse2.c
vpx_dsp/x86/variance_sse2.c
test: remove x86inc.asm distinction
BUG=b:29583530
Conflicts:
test/vp9_subtract_test.cc
configure: remove x86inc.asm distinction
BUG=b:29583530
Change-Id: I59a1192142e89a6a36b906f65a491a734e603617
Update vpx subpixel 1d filter ssse3 asm
Speed test shows the new vertical filters have degradation on Celeron
Chromebook. Added "X86_SUBPIX_VFILTER_PREFER_SLOW_CELERON" to control
the vertical filters activated code. Now just simply active the code
without degradation on Celeron. Later there should be 2 set of vertical
filters ssse3 functions, and let jump table to choose based on CPU type.
improve vpx_filter_block1d* based on replace paddsw+psrlw to pmulhrsw
Make set_reference control API work in VP9
Moved the API patch from NextGenv2. An example was included.
To try it, for example, run the following command:
$ examples/vpx_cx_set_ref vp9 352 288 in.yuv out.ivf 4 30
Conflicts:
examples.mk
examples/vpx_cx_set_ref.c
test/cx_set_ref.sh
vp9/decoder/vp9_decoder.c
deblock filter : moved from vp8 code branch
The deblocking filters used in vp8 have been moved to vpx_dsp for
use by both vp8 and vp9.
vpx_thread.[hc]: update webp source reference
+ drop the blob hash, the updated reference will be updated in the
commit message
BUG=b/29583578
vpx_thread: use native windows cond var if available
BUG=b/29583578
original webp change:
commit 110ad5835ecd66995d0e7f66dca1b90dea595f5a
Author: James Zern <jzern@google.com>
Date: Mon Nov 23 19:49:58 2015 -0800
thread: use native windows cond var if available
Vista / Server 2008 and up. no speed difference observed.
100644 blob 4fc372b7bc6980a9ed3618c8cce5b67ed7b0f412 src/utils/thread.c
100644 blob 840831185502d42a3246e4b7ff870121c8064791 src/utils/thread.h
vpx_thread: use InitializeCriticalSectionEx if available
BUG=b/29583578
original webp change:
commit 63fadc9ffacc77d4617526a50c696d21d558a70b
Author: James Zern <jzern@google.com>
Date: Mon Nov 23 20:38:46 2015 -0800
thread: use InitializeCriticalSectionEx if available
Windows Vista / Server 2008 and up
100644 blob f84207d89b3a6bb98bfe8f3fa55cad72dfd061ff src/utils/thread.c
100644 blob 840831185502d42a3246e4b7ff870121c8064791 src/utils/thread.h
vpx_thread: use WaitForSingleObjectEx if available
BUG=b/29583578
original webp change:
commit 0fd0e12bfe83f16ce4f1c038b251ccbc13c62ac2
Author: James Zern <jzern@google.com>
Date: Mon Nov 23 20:40:26 2015 -0800
thread: use WaitForSingleObjectEx if available
Windows XP and up
100644 blob d58f74e5523dbc985fc531cf5f0833f1e9157cf0 src/utils/thread.c
100644 blob 840831185502d42a3246e4b7ff870121c8064791 src/utils/thread.h
vpx_thread: use CreateThread for windows phone
BUG=b/29583578
original webp change:
commit d2afe974f9d751de144ef09d31255aea13b442c0
Author: James Zern <jzern@google.com>
Date: Mon Nov 23 20:41:26 2015 -0800
thread: use CreateThread for windows phone
_beginthreadex is unavailable for winrt/uwp
Change-Id: Ie7412a568278ac67f0047f1764e2521193d74d4d
100644 blob 93f7622797f05f6acc1126e8296c481d276e4047 src/utils/thread.c
100644 blob 840831185502d42a3246e4b7ff870121c8064791 src/utils/thread.h
vp9_postproc.c missing extern.
BUG=webm:1256
deblock: missing const on extern const.
postproc - move filling of noise buffer to vpx_dsp.
Fix encoder crashes for odd size input
clean-up vp9_intrapred_test
remove tuple and overkill VP9IntraPredBase class.
postproc: noise style fixes.
gtest-all.cc: quiet an unused variable warning
under windows / mingw builds
vp9_intrapred_test: follow-up cleanup
address few comments from ce050afaf3e288895c3bee4160336e2d2133b6ea
Change-Id: I3eece7efa9335f4210303993ef6c1857ad5c29c8
Use regular extended zero bin quantizer for both inter and intra
modes in the first pass. This doesn't affect lowres and midres
significantly, but would bring back 0.9% coding gains for hdres.
Change-Id: Ifa5977fa7b141fc5be595c0f3a4fc81a93f6606f
