In this experiment, an obmc inter prediction mode is enabled for
>= 8X8 inter blocks. When the obmc flag is on, the regular block-
based motion compensation will be refined by using predictors of
the above and left blocks.
Fixed some compatibility issues with vp9_highbitdepth, supertx,
ref_mv, and ext_interp.
Coding gain (%) on derflr/hevcmr/hevchd
OBMC:
1.047/1.022/0.708
OBMC + SUPERTX:
1.652/1.616/1.137
SUPERTX:
0.862/0.779/0.630
Change-Id: I5d8d3c4729c6d3ccb03ec7034563107893103b7f
Setting FIXED_TX_TYPE as 1 makes the encoder skip tx_type search,
about twice as fast.
This speed feature is off by defualt; we can turn it on when we
want to quickly test new ideas.
Change-Id: Ieab5807d17fcd54fce3e8ae2f59a18b42eb79408
This commit enables entropy coding for dynamic reference motion
vector modes. The probability model is contexted on the ranking
categories of the reference motion vector candidates.
Change-Id: I09b58d98a409d63ec1a407331e29f8945b7ef17d
This commit enables the dynamic reference motion vector coding mode
for the compound inter blocks.
Change-Id: Ibe78fd8de6989db392cd67a9d81a69d680345ba1
BD-rate performance improvement (on top of ext-intra):
derflr 0.22%
hevclr 0.36%
hevcmr 0.48%
hevchr 0.37%
stdhd 0.19%
Average speed impact on some derf clips is about 40% slower (on
top of ext-intra). Speed improvment is a to-do.
Change-Id: I8fe3fe8c5e4f60d0462778adbcc15c84dfbe7a25
This commit generalizes dynamic reference motion vector coding mode
to support multiple candidate modes in the rate-distortion
optimization scheme and to support the selection in the bit-stream
syntax. The maximum number of modes allowed is currently limited to
4. The syntax elements for the dynamic reference motion vector
modes are using binary codes. The scheme supports single reference
frame.
It improves the compression performance
derf 0.135%
hevcmr 0.098%
Change-Id: Id053d6ce76e8365e52727bd0d12d28ce3de2e0e8
This commit allows an adaptive motion vector referencing mode
approach. It checks the available reference motion vector candidate
list and decides the amount of motion vector referencing modes. The
current implementation assumes simple binary coding for the syntax.
The compression performance is improved by
derf 0.11%
hevcmr 0.38%
stdhd 0.09%
hevchr 0.23%
The coding gains due to the new reference motion vector system are
derf 1.0%
hevcmr 1.7%
stdhd 1.4%
hevchr 1.3%
Change-Id: Idf932fc373546fe59c8741f1b933ff656e8dbc3f
The loop filter relies on inter_tx_size in MB_MODE_INFO being set
properly when VAR_TX is enabled. Supertx coded blocks did not set this
previously at all, and the differing garbage values eventually resulted
in in a YUV mismatch between encoder and decoder after loop filtering.
This patch fixes this by setting inter_tx_size to the proper supertx
size in both the encoder and the decoder. This should also mean that
loop filtering is done at the proper transform boundaries, even when
supertx or vartx is being used.
Change-Id: I41a564cd6d34ce4a8313ad4efa89d905f5ead731
Fixes some of the issues introduced by a merge from master.
derflr: -0.893% BDRATE
hevcmr: -1.667% BDRATE
Change-Id: I4c5b40ec63a6f19521191d3c730af87db3c4bc00
Combinations of different mv modes for two reference frames
are allowed in compound inter modes. 9 options are enabled,
including NEAREST_NEARESTMV, NEAREST_NEARMV, NEAR_NEARESTMV,
NEAREST_NEWMV, NEW_NEARESTMV, NEAR_NEWMV, NEW_NEARMV, ZERO_ZEROMV,
and NEW_NEWMV.
This experiment is mostly deported from the nextgen branch.
It is made compatible with other experiments
Coding gain of EXT_INTER(derflr/hevcmr/hevchd): 0.533%/0.728%/0.639%
Change-Id: Id47e97284e6481b186870afbad33204b7a33dbb0
NEW2MV is enabled, representing a new motion vector predicted from
NEARMV. It is mostly ported from nextgen, where it was named
NEW_INTER.
A few fixes are done for sub8x8 RDO to correct some misused
mv references in the original patch.
A 'bug-fix' for encoding complexity is done, reducing the additional
encoding time from 50% to 20%. In sub8x8 case, the old patch
did motion search for every interpolation filter (vp9 only
searches once). This fix also slightly improves the coding gain.
This experiment has been made compatible with REF_MV and EXT_REFS.
Coding gain (derflr/hevcmr/hevchd): 0.267%/0.542%/0.257%
Change-Id: I9a94c5f292e7454492a877f65072e8aedba087d4
This commit considers the case where a single reference motion
vector pair is found in the candidate list. It treats this pair
as the effective motion vector for nearestmv mode. This improves
the coding performance by 0.06% for stdhd sets.
Change-Id: I9ce12f456b52912933e05c18c3841a78c26155d2
This commit allows the codec to add motion vector pairs into
the candidate list. It further improves the compression performance
by 0.1% across derf, hevcmr, stdhd, and hevchr sets without adding
encode/decode time.
Change-Id: I88d36da25a2a89bb506d411844af667081eba98b
The nominal tx_type for a given mode is used as a context
to encode the actual tx_type for intra.
Results:
derflr: -0.241% BDRATE
hevcmr: -0.366% BDRATE
Change-Id: Icfe7b0a58d79bc6497a06e3441779afec6e01e21
It allows the codec to account for certain corner cases when
processing inter prediction mode entropy coding.
Change-Id: Ied451f4fff26ba579f6556554b8381ff2ccd0003
Various additional changes were made to make the experiment
compatible with misc_fixes.
derflr: +0.979%
hevcmr: +0.865%
Speed-wise with --enable-supertx the encoder is only about 10%
slower than without. Decoding impact is about 30% slowdown.
Note this does not work with ext-tx or var-tx yet. That is
a TODO.
Change-Id: If25af4241a7a9efbd28f58eda3c4f044c7a7ef4b
This commit allows the codec to analyze the reference motion vector
candidate list and adaptively reduce the size of inter prediction
mode set.
Change-Id: Ied6a403843b860d66f26ed485c1825c05c71bdfc
This commit re-works the entropy coding scheme of the motion
compensated prediction modes. It allows more flexible hyperplane
partition for precise classification.
Change-Id: Iba5035c76691946cf1386b6c495e399c3d9c8fc5
This commit adds top-right corner and collocated block into the
reference motion vector candidate check list.
Change-Id: I892a4c7fb04ddda44e0f9dfe769471252d40c42b
This commit ports the motion vector stack from motion field
analyzer to the encoding and decoding pipeline.
Change-Id: Ie283c1e1a15b4c17a1c7c175ce322bf053bb7840
Under the experiment of EXT_REFS: LAST2_FRAME, LAST3_FRAME, and
LAST4_FRAME.
Coding efficiency: derflr +1.601%; hevchr +1.895%
Speed: Encoder slowed down by ~75%
Change-Id: Ifeee5f049c2c1f7cb29bc897622ef88897082ecf
Remove MISC_FIXES flags except for the changes on MV precision, which
has a 0.1% performance drop.
On derflr, the impact is -0.012%.
Change-Id: I0a74e5a212dd0cb827192a318c92a714c9681e45
Adds a new interpolation experiment.
Improves entropy coding to send the filter type only if
the motion vectors have subpel components.
Adds one new 8-tap smooth filter, and tweaks the others.
derflr: +0.695%
hevcmr: +0.305%
About 5% encode slowdown. No visible impact for decoding.
Also makes the interpolation framework flexible to support both
strictly interpolating filters as well as non-interpolating
filters that filter integer offsets. This is mainly for
further experimentation and if not found useful the code will
be removed.
Change-Id: I8db9cde56ca916be771fe54a130d608bf10786e6
Currently there are two parts in this experiment: extra directional intra
prediction modes and the filter intra modes migrated from the nextgen branch.
Several macros are defined in "blockd.h" to provide controls of the experiment
settings. Setting "DR_ONLY" as 1 (default is 0) means we only use directional
modes, and skip the filter-intra modes; "EXT_INTRA_ANGLES" (default is 128)
defines the number of different angles we want to support; setting
"ANGLE_FAST_SEARCH" as 1 (default is 1) means we use fast sub-optimal search
for the best prediction angle, instead of exhaustive search. The fast search
is about 6 times faster than the exhaustive search, while preserving about
60% of the coding gains.
With extra directional prediction modes (fast search), we observe the following
code gains (number in parentheses is for all-key-frame setting):
derflr +0.42% (+1.79%)
hevclr +0.78% (+2.19%)
hevcmr +1.20% (+3.49%)
stdhd +0.56%
Speed-wise, about 110% slower for key frames, and 30% slower overall.
The gains of filter intra modes mostly add up with the gains of directional
modes. The overall coding gain of this experiment:
derflr +0.94%
hevclr +1.46%
hevcmr +1.94%
stdhd +1.58%
Change-Id: Ida9ad00cdb33aff422d06eb42b4f4e5f25df8a2a
If a block has all coefficients quantized to zero, the codec will
assume that it uses largest transform block size.
Change-Id: Icd4e8e7cdc4b6af6974f87169e50b040ebfe9020
Allows inter and intra tx_types to have different sets of
transforms for different tx_size/sb_type combinations.
Change-Id: Ic0ac1daef7a9fb15c4210271e4d04cd36e5cec8e
Properly update the transform type counts in key frame coding at
decoder. It fixes an enc/dec mismatch issue when both ext-tx and
misc-fixes are turned on.
Change-Id: I1e40a77c8d8157d5ff254b072ce474d8dfbaa3ae
This commit properly resets the recursive transform block partition
array in the settings of using largest transform block size at frame
header level. It fixes one of the unit test failure related to the use
of frame level fixed transform block size with 440 color format.
Change-Id: I6750f323e2c2510c080ffc3af82ce2041f4f60b8
