Also fixes a valgrind error when optimizations are disabled.
Done in preparation for the work on the extended coding unit size
experiment.
Change-Id: Ib074c5a02c94ebed7dd61ff0465d26fa89834545
These changes have been made in preparation for the work on the
extended coding unit size experiment.
Change-Id: I83f289812426bb9aba6c4a5fedd2b0e0a4fe17cb
Under the experiment of CONFIG_LAST4_REF. On derflr testset, using
highbitdepth (HBD), in average PSNR,
(1) LAST2+LAST3+LAST4 obtained +0.361% against LAST2+LAST3;
(2) LAST2+LAST3+LAST4 obtained +1.567% against baesline.
Change-Id: Ic8b14272de6a569df2b54418fa72b505e1ed3aad
Under experiment CONFIG_LAST3_REF, which can only be turned on when
the experiment of CONFIG_MULTI_REF is on, i.e. LAST3_FRAME can only
be used when LAST2_FRAME is used. CONFIG_LAST3_REF would most likely
be combined with CONFIG_MULTI_REF once the performance improvement
is further confirmed.
On the testset of derflr, using Average PSNR metrics, with HighBitDepth
(HBD) on:
(1) LAST2 HBD obtained +0.579% against base HBD;
(2) LAST2 + LAST3 HBD obtained +0.591% against LAST2 HBD;
(3) LAST2 + LAST3 HBD obtained +1.173% against base HBD.
Change-Id: I1aa2b2e2d2c9834e5f8e61bf2d8818c7b1516669
Under the experiment CONFIG_MULTI_REF. Current version shows
LAST2 vs base in nextgen on the testset of derflr:
(1) 8-bit: Average PSNR +0.53%
(worst: students_cif: -0.247%; best: mobile_cif: 1.902%)
(2) 12-bit HBD: Average PSNR +0.63%
(worst: pamphlet_cif: -0.213%, best: mobile_cif: 2.101%)
More tuning on the reference frame context design and default
probs are being conducted. This version does not guarantee to
work with other experiments in nextgen. A separate CL will address
the working with all other experiments.
Change-Id: I7f40d2522517afc26ca389c995bad56989587f65
Adds an additional transform in the ext_tx experiment that
is a 2d DST1-DST1 combination.
To enable use --enable-ext-tx --enable-dst1.
This needs to be later extended to combine DST1 with DCT
or ADST.
Change-Id: I6d29f1b778ef8294bcfb6a512a78fc5eda20723b
Framework for alternate transforms for inter 32x32 and larger based
on dwt-dct hybrid is implemented.
Further experiments are to be condcuted with different
variations of hybrid dct/dwt or plain dwt, as well as super-resolution
mode.
Change-Id: I9a2bf49ba317e7668002cf1499211d7da6fa14ad
The basic idea is to use a pixel’s neighboring colors as
context to predict its own color. Up to 4 neighbors are
considered here: left, left-above, above, right-above.
To reduce the number of contexts, the combination of any
4 (or less) colors are mapped to a reduced number of
patterns. For example, 1111, 2222, 3333, … , can be mapped
to the same pattern: AAAA. SImilarly, 1122, 1133, 2233, …,
can be mapped to the pattern AABB. In this way, the total
number of color contexts is reduced to 16.
This almost doubles the gain of palette coding on screen
content videos.
on screen_content
--enable-palette +14.2%
--enable-palette --enable-tx-skip +21.2%
on derflr
--enable-palette +0.12%
with all other experiments +6.16%
Change-Id: I560306dae216f2ac11a9214968c2ad2319fa1718
Also make changes to transmit palette-enabled flag using
neighbor blocks as context.
on screen_content
--enable-palette +7.35%
on derflr
with all other experiments +6.05%
Change-Id: Id6c2f726d21913d54a3f86ecfea474a4044c27f6
This commit adds encoder side control for vp9 to set color space info
in the output compressed bitstream.
It also amends the "vp9_encoder_params_get_to_decoder" test to verify
the correct color space information is passed from the encoder end to
decoder end.
Change-Id: Ibf5fba2edcb2a8dc37557f6fae5c7816efa52650
(cherry picked from commit e94b415c3479129944a69fafbeacf550fb9237b7)
Added palette coding option for Y channel only, key frame only.
Palette colors are obtained with k-means clustering algorithm.
Run-length coding is used to compress the color indices.
On screen_content:
--enable-palette + 5.75%
--enable-palette --enable-tx_skip +15.04% (was 13.3%)
On derflr:
--enable-palette - 0.03%
with all the other expriments + 5.95% (was 5.98%)
Change-Id: I6d1cf45c889be764d14083170fdf14a424bd31b5
Extends the ext-tx experiment to include all 9 DST/DCT
variants.
Results with ext_tx experiment:
derflr: +1.338 derflr (improved from 1.12)
Change-Id: I24b5564f96bce6ccaa13d88ca6cb9d0c57000597
Extends the ext-tx experiment to include regular and flipped
DST variants. A total of 9 transforms are thus possible for
each inter block with transform size <= 16x16.
In this patch currently only the four ADST_ADST variants
(flipped or non-flipped in both dimensions) are enabled
for inter blocks.
The gain with the ext-tx experiment grows to +1.12 on derflr.
Further experiments are underway.
Change-Id: Ia2ed19a334face6135b064748f727fdc9db278ec
Preliminary 64x64 transform implementation.
Includes all code changes.
All mismatches resolved.
Coding results for derf and stdhd are within noise. stdhd is slightly
higher, derf is slightly lower.
To be further refined.
Change-Id: I091c183f62b156d23ed6f648202eb96c82e69b4b
Adds config parameter vp9_highbitdepth, to support highbitdepth profiles.
Also includes most vpx level high bit-depth functions. However
encode/decode in the highbitdepth profiles will not work until
the rest of the code is in place.
Change-Id: I34c53b253c38873611057a6cbc89a1361b8985a6
Specifies the bit-depth, color sampling and colorspace
for intra only frames for profiles > 0
Also adds checks to ensure that profile 1 and 3 are
exclusively used for non 420 streams.
Change-Id: Icfb15fa1acccbce8f757c78fa8a2f60591360745
Separates HBD profile int two profiles (2 and 3) consistent with the
highbitdepth branch. This patch is ported from the original highbitdepth
branch patch: https://gerrit.chromium.org/gerrit/#/c/70460/
Two of the invalid file tests needed to be updated.
Change-Id: I6a4acd2f7a60b1fb4cbcc8e0dad4eab4248431e3
Adds some high-level hooks for profile 2 before further
progress on the implementation.
According to the definitiion in this patch:
1. Profile 2 only supports 10 or 12 bit color but not 8
2. Profile 2 supports all color sampling modes: 444, 422 and 420,
and alpha plane.
3. Profile 3 is currently undefined.
Please consider the definition carefully and suggest modifications
to the definition as needed.
Change-Id: I5b284fc679e54ac5aee171af72fa7994cfd28995
Renames for consistency with other constants:
NUM_FRAME_TYPES -> FRAME_TYPES
NUM_PARTITION_CONTEXTS -> PARTITION_CONTEXTS
Change-Id: I3db30acb2868eb0a424237c831087b2e264ec47f
Previous change c4048dbd limits the mv search range assuming max block
size of 64x64, this commit change the search range using actual block
size instead.
Change-Id: Ibe07ab02b62bf64bd9f8675d2b997af20a2c7e11
As the pixel values beyond image border are duplicates of pixels
on edge, the change limits the mv search range, any mv beyond
the limits no longer produce new/different prediction values
as entire block with pixels used for subpel interpolation are
outside image border.
Change-Id: I4c6fdf06e33c1cef1489f5470ce0fb4e5e01fb79
Removing the old one bsize_from_dim_lookup. Now we have a way to determine
block size for plane using its subsampling values (ss_size_lookup). And
then we can find the number of pixels in the block (num_pels_log2_lookup).
Change-Id: I6fc981da2ae093de81741d3d78eaefed11015db9
many structures use bw and bh and they have different meanings. This cl attempts
to start this clean up and remove unneccessary 2 step look up log and then
shift operations...
also removed partition type multiple operation code in bitstream.c.
Change-Id: I7e03e552bdfc0939738e430862e3073d30fdd5db
Implements some of the helper functions more efficiently with
lookups rathers than branches. Modeling function is consolidated
to reduce some computations.
Also merged the two enums BLOCK_SIZE_TYPES and BlockSize into
one because there is no need to keep them separate (even though
the semantics are a little different).
No bitstream or output change.
About 0.5% speedup
Change-Id: I7d71a66e8031ddb340744dc493f22976052b8f9f
