generic-library/vpx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge "avoid resetting framerate during vpx_codec_enc_config_set()"

Browse Source
This commit is contained in:
Johann 2011-11-16 15:32:44 -08:00 committed by Gerrit Code Review
commit 120a464026
6 changed files with 25 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
vp8/common/onyx.h
View File

@ -104,7 +104,7 @@ extern "C"
int Version; // 4 versions of bitstream defined 0 best quality/slowest decode, 3 lowest quality/fastest decode
int Width; // width of data passed to the compressor
int Height; // height of data passed to the compressor
double frame_rate; // set to passed in framerate
struct vpx_rational timebase;
int target_bandwidth; // bandwidth to be used in kilobits per second
int noise_sensitivity; // parameter used for applying pre processing blur: recommendation 0

6
vp8/encoder/firstpass.c
View File

@ -1276,7 +1276,7 @@ void vp8_init_second_pass(VP8_COMP *cpi)
// pass.
vp8_new_frame_rate(cpi, 10000000.0 * cpi->twopass.total_stats->count / cpi->twopass.total_stats->duration);
cpi->output_frame_rate = cpi->oxcf.frame_rate;
cpi->output_frame_rate = cpi->frame_rate;
cpi->twopass.bits_left = (int64_t)(cpi->twopass.total_stats->duration * cpi->oxcf.target_bandwidth / 10000000.0) ;
cpi->twopass.bits_left -= (int64_t)(cpi->twopass.total_stats->duration * two_pass_min_rate / 10000000.0);
@ -3061,7 +3061,7 @@ static void find_next_key_frame(VP8_COMP *cpi, FIRSTPASS_STATS *this_frame)
// Calculate Average bits per frame.
//av_bits_per_frame = cpi->twopass.bits_left/(double)(cpi->twopass.total_stats->count - cpi->common.current_video_frame);
av_bits_per_frame = cpi->oxcf.target_bandwidth / DOUBLE_DIVIDE_CHECK((double)cpi->oxcf.frame_rate);
av_bits_per_frame = cpi->oxcf.target_bandwidth / DOUBLE_DIVIDE_CHECK((double)cpi->frame_rate);
//if ( av_bits_per_frame < 0.0 )
// av_bits_per_frame = 0.0
@ -3123,7 +3123,7 @@ static void find_next_key_frame(VP8_COMP *cpi, FIRSTPASS_STATS *this_frame)
}
else
{
int64_t clip_bits = (int64_t)(cpi->twopass.total_stats->count * cpi->oxcf.target_bandwidth / DOUBLE_DIVIDE_CHECK((double)cpi->oxcf.frame_rate));
int64_t clip_bits = (int64_t)(cpi->twopass.total_stats->count * cpi->oxcf.target_bandwidth / DOUBLE_DIVIDE_CHECK((double)cpi->frame_rate));
int64_t over_spend = cpi->oxcf.starting_buffer_level - cpi->buffer_level;
if ((last_kf_resampled && (kf_q > cpi->worst_quality)) || // If triggered last time the threshold for triggering again is reduced

24
vp8/encoder/onyx_if.c
View File

@ -1470,8 +1470,8 @@ void vp8_new_frame_rate(VP8_COMP *cpi, double framerate)
if(framerate < .1)
framerate = 30;
cpi->oxcf.frame_rate = framerate;
cpi->output_frame_rate = cpi->oxcf.frame_rate;
cpi->frame_rate = framerate;
cpi->output_frame_rate = framerate;
cpi->per_frame_bandwidth = (int)(cpi->oxcf.target_bandwidth /
cpi->output_frame_rate);
cpi->av_per_frame_bandwidth = cpi->per_frame_bandwidth;
@ -1527,6 +1527,18 @@ static void init_config(VP8_PTR ptr, VP8_CONFIG *oxcf)
cm->version = oxcf->Version;
vp8_setup_version(cm);
/* frame rate is not available on the first frame, as it's derived from
* the observed timestamps. The actual value used here doesn't matter
* too much, as it will adapt quickly. If the reciprocal of the timebase
* seems like a reasonable framerate, then use that as a guess, otherwise
* use 30.
*/
cpi->frame_rate = (double)(oxcf->timebase.den) /
(double)(oxcf->timebase.num);
if (cpi->frame_rate > 180)
cpi->frame_rate = 30;
// change includes all joint functionality
vp8_change_config(ptr, oxcf);
@ -1787,7 +1799,7 @@ void vp8_change_config(VP8_PTR ptr, VP8_CONFIG *oxcf)
cpi->oxcf.target_bandwidth, 1000);
// Set up frame rate and related parameters rate control values.
vp8_new_frame_rate(cpi, cpi->oxcf.frame_rate);
vp8_new_frame_rate(cpi, cpi->frame_rate);
// Set absolute upper and lower quality limits
cpi->worst_quality = cpi->oxcf.worst_allowed_q;
@ -2408,7 +2420,7 @@ void vp8_remove_compressor(VP8_PTR *ptr)
{
extern int count_mb_seg[4];
FILE *f = fopen("modes.stt", "a");
double dr = (double)cpi->oxcf.frame_rate * (double)bytes * (double)8 / (double)count / (double)1000 ;
double dr = (double)cpi->frame_rate * (double)bytes * (double)8 / (double)count / (double)1000 ;
fprintf(f, "intra_mode in Intra Frames:\n");
fprintf(f, "Y: %8d, %8d, %8d, %8d, %8d\n", y_modes[0], y_modes[1], y_modes[2], y_modes[3], y_modes[4]);
fprintf(f, "UV:%8d, %8d, %8d, %8d\n", uv_modes[0], uv_modes[1], uv_modes[2], uv_modes[3]);
@ -4856,7 +4868,7 @@ static void Pass2Encode(VP8_COMP *cpi, unsigned long *size, unsigned char *dest,
{
double two_pass_min_rate = (double)(cpi->oxcf.target_bandwidth
*cpi->oxcf.two_pass_vbrmin_section / 100);
cpi->twopass.bits_left += (int64_t)(two_pass_min_rate / cpi->oxcf.frame_rate);
cpi->twopass.bits_left += (int64_t)(two_pass_min_rate / cpi->frame_rate);
}
}
#endif
@ -5092,7 +5104,7 @@ int vp8_get_compressed_data(VP8_PTR ptr, unsigned int *frame_flags, unsigned lon
if(interval > 10000000.0)
interval = 10000000;
avg_duration = 10000000.0 / cpi->oxcf.frame_rate;
avg_duration = 10000000.0 / cpi->frame_rate;
avg_duration *= (interval - avg_duration + this_duration);
avg_duration /= interval;

1
vp8/encoder/onyx_int.h
View File

@ -418,6 +418,7 @@ typedef struct VP8_COMP
int buffered_mode;
double frame_rate;
int64_t buffer_level;
int bits_off_target;

2
vp8/encoder/rdopt.c
View File

@ -296,7 +296,7 @@ void vp8_initialize_rd_consts(VP8_COMP *cpi, int Qvalue)
void vp8_auto_select_speed(VP8_COMP *cpi)
{
int milliseconds_for_compress = (int)(1000000 / cpi->oxcf.frame_rate);
int milliseconds_for_compress = (int)(1000000 / cpi->frame_rate);
milliseconds_for_compress = milliseconds_for_compress * (16 - cpi->oxcf.cpu_used) / 16;

9
vp8/vp8_cx_iface.c
View File

@ -271,14 +271,7 @@ static vpx_codec_err_t set_vp8e_config(VP8_CONFIG *oxcf,
oxcf->Width = cfg.g_w;
oxcf->Height = cfg.g_h;
/* guess a frame rate if out of whack, use 30 */
oxcf->frame_rate = (double)(cfg.g_timebase.den) /
(double)(cfg.g_timebase.num);
if (oxcf->frame_rate > 180)
{
oxcf->frame_rate = 30;
}
oxcf->timebase = cfg.g_timebase;
oxcf->error_resilient_mode = cfg.g_error_resilient;