generic-library/vpx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
fbbd3e1832
vpx/vp8/common/entropymode.h

90 lines
3.5 KiB
C
Raw Normal View History

Initial WebM release
2010-05-18 17:58:33 +02:00
/*
Use WebM in copyright notice for consistency Changes 'The VP8 project' to 'The WebM project', for consistency with other webmproject.org repositories. Fixes issue #97. Change-Id: I37c13ed5fbdb9d334ceef71c6350e9febed9bbba
2010-09-09 14:16:39 +02:00
* Copyright (c) 2010 The WebM project authors. All Rights Reserved.
Initial WebM release
2010-05-18 17:58:33 +02:00
*
cosmetics: trim trailing whitespace When the license headers were updated, they accidentally contained trailing whitespace, so unfortunately we have to touch all the files again. Change-Id: I236c05fade06589e417179c0444cb39b09e4200d
2010-06-18 18:39:21 +02:00
* Use of this source code is governed by a BSD-style license
LICENSE: update with latest text Change-Id: Ieebea089095d9073b3a94932791099f614ce120c
2010-06-04 22:19:40 +02:00
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
cosmetics: trim trailing whitespace When the license headers were updated, they accidentally contained trailing whitespace, so unfortunately we have to touch all the files again. Change-Id: I236c05fade06589e417179c0444cb39b09e4200d
2010-06-18 18:39:21 +02:00
* in the file PATENTS. All contributing project authors may
LICENSE: update with latest text Change-Id: Ieebea089095d9073b3a94932791099f614ce120c
2010-06-04 22:19:40 +02:00
* be found in the AUTHORS file in the root of the source tree.
Initial WebM release
2010-05-18 17:58:33 +02:00
*/
#ifndef __INC_ENTROPYMODE_H
#define __INC_ENTROPYMODE_H
Adds support for switchable interpolation filters. Allows for swtiching/setting interpolation filters at the MB level. A frame level flag indicates whether to use a specifc filter for the entire frame or to signal the interpolation filter for each MB. When switchable filters are used, the encoder chooses between 8-tap and 8-tap sharp filters. The code currently has options to explore other variations as well, which will be cleaned up subsequently. One issue with the framework is that encoding is slow. I tried to do some tricks to speed things up but it is still slow. Decoding speed should not be affected since the number of filter taps remain unchanged. With the current version, we are up 0.5% on derf on average but some videos city/mobile improve by close to 4 and 2% respectively. If we did a full-search by turning the SEARCH_BEST_FILTER flag on, the results are somewhat better. The framework can be combined with filtered prediction, and I seek feedback regarding that. Rebased. Change-Id: I8f632cb2c111e76284140a2bd480945d6d42b77a
2012-07-18 22:43:01 +02:00
#include "blockd.h"
Initial WebM release
2010-05-18 17:58:33 +02:00
#include "treecoder.h"
Adds support for switchable interpolation filters. Allows for swtiching/setting interpolation filters at the MB level. A frame level flag indicates whether to use a specifc filter for the entire frame or to signal the interpolation filter for each MB. When switchable filters are used, the encoder chooses between 8-tap and 8-tap sharp filters. The code currently has options to explore other variations as well, which will be cleaned up subsequently. One issue with the framework is that encoding is slow. I tried to do some tricks to speed things up but it is still slow. Decoding speed should not be affected since the number of filter taps remain unchanged. With the current version, we are up 0.5% on derf on average but some videos city/mobile improve by close to 4 and 2% respectively. If we did a full-search by turning the SEARCH_BEST_FILTER flag on, the results are somewhat better. The framework can be combined with filtered prediction, and I seek feedback regarding that. Rebased. Change-Id: I8f632cb2c111e76284140a2bd480945d6d42b77a
2012-07-18 22:43:01 +02:00
#define SUBMVREF_COUNT 5
#define VP8_NUMMBSPLITS 4
Initial WebM release
2010-05-18 17:58:33 +02:00
typedef const int vp8_mbsplit[16];
extern vp8_mbsplit vp8_mbsplits [VP8_NUMMBSPLITS];
extern const int vp8_mbsplit_count [VP8_NUMMBSPLITS]; /* # of subsets */
Restyle code Approximate the Google style guide[1] so that that there's a written document to follow and tools to check compliance[2]. [1]: http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml [2]: http://google-styleguide.googlecode.com/svn/trunk/cpplint/cpplint.py Change-Id: Idf40e3d8dddcc72150f6af127b13e5dab838685f
2012-07-14 00:21:29 +02:00
extern const vp8_prob vp8_mbsplit_probs [VP8_NUMMBSPLITS - 1];
Initial WebM release
2010-05-18 17:58:33 +02:00
Change common vp8_ public symbol prefixes to vp9_. Change-Id: Ic5a5f60e1ff9d9ccae4174160d36529466eeb509
2012-10-31 00:25:53 +01:00
extern int vp9_mv_cont(const int_mv *l, const int_mv *a);
Continued adaptive entropy coding Incorporates mv_ref, mbsplit and second_mv into the adaptive entropy framework. The mv_ref framework has been modified from before. Adds some clean-ups and fixes. Results with the adaptive entropy experiment are currently up by +1.93% on derf; +2.33% std-hd and +1.87% yt-hd. Fixed a nasty intermittent bug. Change-Id: I4b1ac9f9483b48432597595195bfec05f31d1e39
2012-06-20 14:07:24 +02:00
Restyle code Approximate the Google style guide[1] so that that there's a written document to follow and tools to check compliance[2]. [1]: http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml [2]: http://google-styleguide.googlecode.com/svn/trunk/cpplint/cpplint.py Change-Id: Idf40e3d8dddcc72150f6af127b13e5dab838685f
2012-07-14 00:21:29 +02:00
extern const vp8_prob vp8_sub_mv_ref_prob [VP8_SUBMVREFS - 1];
extern const vp8_prob vp8_sub_mv_ref_prob2 [SUBMVREF_COUNT][VP8_SUBMVREFS - 1];
Initial WebM release
2010-05-18 17:58:33 +02:00
extern const unsigned int vp8_kf_default_bmode_counts [VP8_BINTRAMODES] [VP8_BINTRAMODES] [VP8_BINTRAMODES];
extern const vp8_tree_index vp8_bmode_tree[];
extern const vp8_tree_index vp8_ymode_tree[];
extern const vp8_tree_index vp8_kf_ymode_tree[];
extern const vp8_tree_index vp8_uv_mode_tree[];
Superblock coding. This commit adds a pick_sb_mode() function which selects the best 32x32 superblock coding mode. Then it selects the best per-MB modes, compares the two and encodes that in the bitstream. The bitstream coding is rather simplistic right now. At the SB level, we code a bit to indicate whether this block uses SB-coding (32x32 prediction) or MB-coding (anything else), and then we follow with the actual modes. This could and should be modified in the future, but is omitted from this commit because it will likely involve reorganizing much more code rather than just adding SB coding, so it's better to let that be judged on its own merits. Gains on derf: about even, YT/HD: +0.75%, STD/HD: +1.5%. Change-Id: Iae313a7cbd8f75b3c66d04a68b991cb096eaaba6
2012-08-20 23:43:34 +02:00
#define vp8_sb_ymode_tree vp8_uv_mode_tree
add 8x8 intra prediction modes Patch 1 to Patch 3 is an initial implementation of 8x8 intra prediction modes, here are with the following assumptions: a. 8x8 has 4 prediction modes DC, H, V and TM b. UV 4x4 block use the same mode as corresponding 8x8 area c. i8x8 modes are enabled for key frame only for now Patch 4: d. removed debug code from previous patches Patch 5: e. added stats code to collect entropy stats and further cleaned up Patch 6: f. changed mode stats code to collect finer stats of modes Patch 7: g. normalized i8x8 modes distribution to total at 256 (8bits). Patch 8: h. fixed a bug in decoder and removed debug printf output. Patch 9: i. more cleanups to address paul's comment Patch 10: j. messy rebase/merges to bring the commit up to date. Tests on HD clips encoded with all key frame showing consistent gain on all clips and all metrics:~0.5%(psnr) and 0.6%(ssim): http://www.corp.google.com/~yaowu/no_crawl/i8x8hd_allkey_fixedq.html To build and test, configure with: --enable-experimental --enable-i8x8 Change-Id: I9813fe07ae48cab5fdb5d904bca022514ad01e7f
2011-08-05 01:30:27 +02:00
extern const vp8_tree_index vp8_i8x8_mode_tree[];
Initial WebM release
2010-05-18 17:58:33 +02:00
extern const vp8_tree_index vp8_mbsplit_tree[];
extern const vp8_tree_index vp8_mv_ref_tree[];
Superblock coding. This commit adds a pick_sb_mode() function which selects the best 32x32 superblock coding mode. Then it selects the best per-MB modes, compares the two and encodes that in the bitstream. The bitstream coding is rather simplistic right now. At the SB level, we code a bit to indicate whether this block uses SB-coding (32x32 prediction) or MB-coding (anything else), and then we follow with the actual modes. This could and should be modified in the future, but is omitted from this commit because it will likely involve reorganizing much more code rather than just adding SB coding, so it's better to let that be judged on its own merits. Gains on derf: about even, YT/HD: +0.75%, STD/HD: +1.5%. Change-Id: Iae313a7cbd8f75b3c66d04a68b991cb096eaaba6
2012-08-20 23:43:34 +02:00
extern const vp8_tree_index vp8_sb_mv_ref_tree[];
Initial WebM release
2010-05-18 17:58:33 +02:00
extern const vp8_tree_index vp8_sub_mv_ref_tree[];
extern struct vp8_token_struct vp8_bmode_encodings [VP8_BINTRAMODES];
extern struct vp8_token_struct vp8_ymode_encodings [VP8_YMODES];
Superblock coding. This commit adds a pick_sb_mode() function which selects the best 32x32 superblock coding mode. Then it selects the best per-MB modes, compares the two and encodes that in the bitstream. The bitstream coding is rather simplistic right now. At the SB level, we code a bit to indicate whether this block uses SB-coding (32x32 prediction) or MB-coding (anything else), and then we follow with the actual modes. This could and should be modified in the future, but is omitted from this commit because it will likely involve reorganizing much more code rather than just adding SB coding, so it's better to let that be judged on its own merits. Gains on derf: about even, YT/HD: +0.75%, STD/HD: +1.5%. Change-Id: Iae313a7cbd8f75b3c66d04a68b991cb096eaaba6
2012-08-20 23:43:34 +02:00
extern struct vp8_token_struct vp8_sb_kf_ymode_encodings [VP8_I32X32_MODES];
Initial WebM release
2010-05-18 17:58:33 +02:00
extern struct vp8_token_struct vp8_kf_ymode_encodings [VP8_YMODES];
Superblock coding. This commit adds a pick_sb_mode() function which selects the best 32x32 superblock coding mode. Then it selects the best per-MB modes, compares the two and encodes that in the bitstream. The bitstream coding is rather simplistic right now. At the SB level, we code a bit to indicate whether this block uses SB-coding (32x32 prediction) or MB-coding (anything else), and then we follow with the actual modes. This could and should be modified in the future, but is omitted from this commit because it will likely involve reorganizing much more code rather than just adding SB coding, so it's better to let that be judged on its own merits. Gains on derf: about even, YT/HD: +0.75%, STD/HD: +1.5%. Change-Id: Iae313a7cbd8f75b3c66d04a68b991cb096eaaba6
2012-08-20 23:43:34 +02:00
extern struct vp8_token_struct vp8_i8x8_mode_encodings [VP8_I8X8_MODES];
Initial WebM release
2010-05-18 17:58:33 +02:00
extern struct vp8_token_struct vp8_uv_mode_encodings [VP8_UV_MODES];
extern struct vp8_token_struct vp8_mbsplit_encodings [VP8_NUMMBSPLITS];
/* Inter mode values do not start at zero */
extern struct vp8_token_struct vp8_mv_ref_encoding_array [VP8_MVREFS];
Superblock coding. This commit adds a pick_sb_mode() function which selects the best 32x32 superblock coding mode. Then it selects the best per-MB modes, compares the two and encodes that in the bitstream. The bitstream coding is rather simplistic right now. At the SB level, we code a bit to indicate whether this block uses SB-coding (32x32 prediction) or MB-coding (anything else), and then we follow with the actual modes. This could and should be modified in the future, but is omitted from this commit because it will likely involve reorganizing much more code rather than just adding SB coding, so it's better to let that be judged on its own merits. Gains on derf: about even, YT/HD: +0.75%, STD/HD: +1.5%. Change-Id: Iae313a7cbd8f75b3c66d04a68b991cb096eaaba6
2012-08-20 23:43:34 +02:00
extern struct vp8_token_struct vp8_sb_mv_ref_encoding_array [VP8_MVREFS];
Initial WebM release
2010-05-18 17:58:33 +02:00
extern struct vp8_token_struct vp8_sub_mv_ref_encoding_array [VP8_SUBMVREFS];
Change common vp8_ public symbol prefixes to vp9_. Change-Id: Ic5a5f60e1ff9d9ccae4174160d36529466eeb509
2012-10-31 00:25:53 +01:00
void vp9_entropy_mode_init(void);
Initial WebM release
2010-05-18 17:58:33 +02:00
Adds support for switchable interpolation filters. Allows for swtiching/setting interpolation filters at the MB level. A frame level flag indicates whether to use a specifc filter for the entire frame or to signal the interpolation filter for each MB. When switchable filters are used, the encoder chooses between 8-tap and 8-tap sharp filters. The code currently has options to explore other variations as well, which will be cleaned up subsequently. One issue with the framework is that encoding is slow. I tried to do some tricks to speed things up but it is still slow. Decoding speed should not be affected since the number of filter taps remain unchanged. With the current version, we are up 0.5% on derf on average but some videos city/mobile improve by close to 4 and 2% respectively. If we did a full-search by turning the SEARCH_BEST_FILTER flag on, the results are somewhat better. The framework can be combined with filtered prediction, and I seek feedback regarding that. Rebased. Change-Id: I8f632cb2c111e76284140a2bd480945d6d42b77a
2012-07-18 22:43:01 +02:00
struct VP8Common;
Change common vp8_ public symbol prefixes to vp9_. Change-Id: Ic5a5f60e1ff9d9ccae4174160d36529466eeb509
2012-10-31 00:25:53 +01:00
void vp9_init_mbmode_probs(struct VP8Common *x);
extern void vp9_init_mode_contexts(struct VP8Common *pc);
extern void vp9_update_mode_context(struct VP8Common *pc);;
extern void vp9_accum_mv_refs(struct VP8Common *pc,
Restyle code Approximate the Google style guide[1] so that that there's a written document to follow and tools to check compliance[2]. [1]: http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml [2]: http://google-styleguide.googlecode.com/svn/trunk/cpplint/cpplint.py Change-Id: Idf40e3d8dddcc72150f6af127b13e5dab838685f
2012-07-14 00:21:29 +02:00
MB_PREDICTION_MODE m,
const int ct[4]);
Revised coding using adaptive mode context to depend on frame type A previous commit 76feb965 made the vp8_mode_context adaptive on a frame frame basis, this commit further made the coding context adaptive to two frame types separately. Tests on derf set showed a further small gain on all metrics: avg psnr 0.10%, glb psnr: 0.11%, ssim: 0.08% http://www.corp.google.com/~yaowu/no_crawl/newNearMode_1209.html Change-Id: I7b3e32ec8729de1903d14a3f1213f1624b78cdee
2011-12-08 20:43:09 +01:00
Change common vp8_ public symbol prefixes to vp9_. Change-Id: Ic5a5f60e1ff9d9ccae4174160d36529466eeb509
2012-10-31 00:25:53 +01:00
void vp9_default_bmode_probs(vp8_prob dest [VP8_BINTRAMODES - 1]);
void vp9_kf_default_bmode_probs(vp8_prob dest [VP8_BINTRAMODES] [VP8_BINTRAMODES] [VP8_BINTRAMODES - 1]);
Initial WebM release
2010-05-18 17:58:33 +02:00
Change common vp8_ public symbol prefixes to vp9_. Change-Id: Ic5a5f60e1ff9d9ccae4174160d36529466eeb509
2012-10-31 00:25:53 +01:00
void vp9_adapt_mode_probs(struct VP8Common *);
Adds support for switchable interpolation filters. Allows for swtiching/setting interpolation filters at the MB level. A frame level flag indicates whether to use a specifc filter for the entire frame or to signal the interpolation filter for each MB. When switchable filters are used, the encoder chooses between 8-tap and 8-tap sharp filters. The code currently has options to explore other variations as well, which will be cleaned up subsequently. One issue with the framework is that encoding is slow. I tried to do some tricks to speed things up but it is still slow. Decoding speed should not be affected since the number of filter taps remain unchanged. With the current version, we are up 0.5% on derf on average but some videos city/mobile improve by close to 4 and 2% respectively. If we did a full-search by turning the SEARCH_BEST_FILTER flag on, the results are somewhat better. The framework can be combined with filtered prediction, and I seek feedback regarding that. Rebased. Change-Id: I8f632cb2c111e76284140a2bd480945d6d42b77a
2012-07-18 22:43:01 +02:00
#define VP8_SWITCHABLE_FILTERS 2 /* number of switchable filters */
extern const INTERPOLATIONFILTERTYPE vp8_switchable_interp
[VP8_SWITCHABLE_FILTERS];
Merging in the Switchable interp experiment There is a macro DEFAULT_INTERP_FILTER defined in encoder/onyx_if.c that is set as EIGHTTAP for now - so SWITCHABLE is not really used. Ideally, this should be SWITCHABLE but that would make the encoder quite a bit slower. We will change the default filter to SWITCHABLE once we find a faster way to search for switchable filters. Change-Id: Iee91832cdc07e6e14108d9b543130fdd12fc9874
2012-10-22 23:43:01 +02:00
extern const int vp8_switchable_interp_map[SWITCHABLE + 1];
Adds support for switchable interpolation filters. Allows for swtiching/setting interpolation filters at the MB level. A frame level flag indicates whether to use a specifc filter for the entire frame or to signal the interpolation filter for each MB. When switchable filters are used, the encoder chooses between 8-tap and 8-tap sharp filters. The code currently has options to explore other variations as well, which will be cleaned up subsequently. One issue with the framework is that encoding is slow. I tried to do some tricks to speed things up but it is still slow. Decoding speed should not be affected since the number of filter taps remain unchanged. With the current version, we are up 0.5% on derf on average but some videos city/mobile improve by close to 4 and 2% respectively. If we did a full-search by turning the SEARCH_BEST_FILTER flag on, the results are somewhat better. The framework can be combined with filtered prediction, and I seek feedback regarding that. Rebased. Change-Id: I8f632cb2c111e76284140a2bd480945d6d42b77a
2012-07-18 22:43:01 +02:00
extern const vp8_tree_index vp8_switchable_interp_tree
Merging in the Switchable interp experiment There is a macro DEFAULT_INTERP_FILTER defined in encoder/onyx_if.c that is set as EIGHTTAP for now - so SWITCHABLE is not really used. Ideally, this should be SWITCHABLE but that would make the encoder quite a bit slower. We will change the default filter to SWITCHABLE once we find a faster way to search for switchable filters. Change-Id: Iee91832cdc07e6e14108d9b543130fdd12fc9874
2012-10-22 23:43:01 +02:00
[2*(VP8_SWITCHABLE_FILTERS - 1)];
Adds support for switchable interpolation filters. Allows for swtiching/setting interpolation filters at the MB level. A frame level flag indicates whether to use a specifc filter for the entire frame or to signal the interpolation filter for each MB. When switchable filters are used, the encoder chooses between 8-tap and 8-tap sharp filters. The code currently has options to explore other variations as well, which will be cleaned up subsequently. One issue with the framework is that encoding is slow. I tried to do some tricks to speed things up but it is still slow. Decoding speed should not be affected since the number of filter taps remain unchanged. With the current version, we are up 0.5% on derf on average but some videos city/mobile improve by close to 4 and 2% respectively. If we did a full-search by turning the SEARCH_BEST_FILTER flag on, the results are somewhat better. The framework can be combined with filtered prediction, and I seek feedback regarding that. Rebased. Change-Id: I8f632cb2c111e76284140a2bd480945d6d42b77a
2012-07-18 22:43:01 +02:00
extern struct vp8_token_struct vp8_switchable_interp_encodings
[VP8_SWITCHABLE_FILTERS];
extern const vp8_prob vp8_switchable_interp_prob
Merging in the Switchable interp experiment There is a macro DEFAULT_INTERP_FILTER defined in encoder/onyx_if.c that is set as EIGHTTAP for now - so SWITCHABLE is not really used. Ideally, this should be SWITCHABLE but that would make the encoder quite a bit slower. We will change the default filter to SWITCHABLE once we find a faster way to search for switchable filters. Change-Id: Iee91832cdc07e6e14108d9b543130fdd12fc9874
2012-10-22 23:43:01 +02:00
[VP8_SWITCHABLE_FILTERS + 1][VP8_SWITCHABLE_FILTERS - 1];
Adaptive entropy coding of coefficients, modes, mv. This patch incorporates adaptive entropy coding of coefficient tokens, and mode/mv information based on distributions encountered in a frame. Specifically, there is an initial forward update to the probabilities in the bitstream as before for coding the symbols in the frame, however at the end of decoding each frame, the forward update to the probabilities is reverted and instead the probabilities are updated towards the actual distributions encountered within the frame. The amount of update is weighted by the number of hits within each context. Results on derf/hd/std-hd are all up by 1.6%. On derf, the most of the gains come from coefficients, however for the hd and std-hd sets, the most of the gains come from the mode/mv information updates. Change-Id: I708c0e11fdacafee04940fe7ae159ba6844005fd
2012-06-06 00:25:07 +02:00
#endif
Reference in New Issue Copy Permalink