vpx/vp9/encoder/vp9_encodeframe.c

3955 lines
145 KiB
C
Raw Normal View History

2010-05-18 17:58:33 +02:00
/*
* Copyright (c) 2010 The WebM project authors. All Rights Reserved.
2010-05-18 17:58:33 +02:00
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
2010-05-18 17:58:33 +02:00
*/
#include <limits.h>
#include <math.h>
#include <stdio.h>
#include "./vp9_rtcd.h"
#include "./vpx_config.h"
#include "vpx_ports/vpx_timer.h"
#include "vp9/common/vp9_common.h"
#include "vp9/common/vp9_entropy.h"
#include "vp9/common/vp9_entropymode.h"
#include "vp9/common/vp9_idct.h"
#include "vp9/common/vp9_mvref_common.h"
#include "vp9/common/vp9_pred_common.h"
#include "vp9/common/vp9_quant_common.h"
#include "vp9/common/vp9_reconintra.h"
#include "vp9/common/vp9_reconinter.h"
#include "vp9/common/vp9_seg_common.h"
#include "vp9/common/vp9_systemdependent.h"
#include "vp9/common/vp9_tile_common.h"
#include "vp9/encoder/vp9_aq_complexity.h"
#include "vp9/encoder/vp9_aq_cyclicrefresh.h"
#include "vp9/encoder/vp9_aq_variance.h"
#include "vp9/encoder/vp9_encodeframe.h"
#include "vp9/encoder/vp9_encodemb.h"
#include "vp9/encoder/vp9_encodemv.h"
#include "vp9/encoder/vp9_ethread.h"
#include "vp9/encoder/vp9_extend.h"
#include "vp9/encoder/vp9_pickmode.h"
#include "vp9/encoder/vp9_rd.h"
#include "vp9/encoder/vp9_rdopt.h"
#include "vp9/encoder/vp9_segmentation.h"
#include "vp9/encoder/vp9_tokenize.h"
#define GF_ZEROMV_ZBIN_BOOST 0
#define LF_ZEROMV_ZBIN_BOOST 0
#define MV_ZBIN_BOOST 0
#define SPLIT_MV_ZBIN_BOOST 0
#define INTRA_ZBIN_BOOST 0
static void encode_superblock(VP9_COMP *cpi, ThreadData * td,
TOKENEXTRA **t, int output_enabled,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
int mi_row, int mi_col, BLOCK_SIZE bsize,
PICK_MODE_CONTEXT *ctx);
// Motion vector component magnitude threshold for defining fast motion.
#define FAST_MOTION_MV_THRESH 24
// This is used as a reference when computing the source variance for the
// purposes of activity masking.
// Eventually this should be replaced by custom no-reference routines,
// which will be faster.
static const uint8_t VP9_VAR_OFFS[64] = {
128, 128, 128, 128, 128, 128, 128, 128,
128, 128, 128, 128, 128, 128, 128, 128,
128, 128, 128, 128, 128, 128, 128, 128,
128, 128, 128, 128, 128, 128, 128, 128,
128, 128, 128, 128, 128, 128, 128, 128,
128, 128, 128, 128, 128, 128, 128, 128,
128, 128, 128, 128, 128, 128, 128, 128,
128, 128, 128, 128, 128, 128, 128, 128
};
#if CONFIG_VP9_HIGHBITDEPTH
static const uint16_t VP9_HIGH_VAR_OFFS_8[64] = {
128, 128, 128, 128, 128, 128, 128, 128,
128, 128, 128, 128, 128, 128, 128, 128,
128, 128, 128, 128, 128, 128, 128, 128,
128, 128, 128, 128, 128, 128, 128, 128,
128, 128, 128, 128, 128, 128, 128, 128,
128, 128, 128, 128, 128, 128, 128, 128,
128, 128, 128, 128, 128, 128, 128, 128,
128, 128, 128, 128, 128, 128, 128, 128
};
static const uint16_t VP9_HIGH_VAR_OFFS_10[64] = {
128*4, 128*4, 128*4, 128*4, 128*4, 128*4, 128*4, 128*4,
128*4, 128*4, 128*4, 128*4, 128*4, 128*4, 128*4, 128*4,
128*4, 128*4, 128*4, 128*4, 128*4, 128*4, 128*4, 128*4,
128*4, 128*4, 128*4, 128*4, 128*4, 128*4, 128*4, 128*4,
128*4, 128*4, 128*4, 128*4, 128*4, 128*4, 128*4, 128*4,
128*4, 128*4, 128*4, 128*4, 128*4, 128*4, 128*4, 128*4,
128*4, 128*4, 128*4, 128*4, 128*4, 128*4, 128*4, 128*4,
128*4, 128*4, 128*4, 128*4, 128*4, 128*4, 128*4, 128*4
};
static const uint16_t VP9_HIGH_VAR_OFFS_12[64] = {
128*16, 128*16, 128*16, 128*16, 128*16, 128*16, 128*16, 128*16,
128*16, 128*16, 128*16, 128*16, 128*16, 128*16, 128*16, 128*16,
128*16, 128*16, 128*16, 128*16, 128*16, 128*16, 128*16, 128*16,
128*16, 128*16, 128*16, 128*16, 128*16, 128*16, 128*16, 128*16,
128*16, 128*16, 128*16, 128*16, 128*16, 128*16, 128*16, 128*16,
128*16, 128*16, 128*16, 128*16, 128*16, 128*16, 128*16, 128*16,
128*16, 128*16, 128*16, 128*16, 128*16, 128*16, 128*16, 128*16,
128*16, 128*16, 128*16, 128*16, 128*16, 128*16, 128*16, 128*16
};
#endif // CONFIG_VP9_HIGHBITDEPTH
static unsigned int get_sby_perpixel_variance(VP9_COMP *cpi,
const struct buf_2d *ref,
BLOCK_SIZE bs) {
unsigned int sse;
const unsigned int var = cpi->fn_ptr[bs].vf(ref->buf, ref->stride,
VP9_VAR_OFFS, 0, &sse);
return ROUND_POWER_OF_TWO(var, num_pels_log2_lookup[bs]);
}
#if CONFIG_VP9_HIGHBITDEPTH
static unsigned int high_get_sby_perpixel_variance(
VP9_COMP *cpi, const struct buf_2d *ref, BLOCK_SIZE bs, int bd) {
unsigned int var, sse;
switch (bd) {
case 10:
var = cpi->fn_ptr[bs].vf(ref->buf, ref->stride,
CONVERT_TO_BYTEPTR(VP9_HIGH_VAR_OFFS_10),
0, &sse);
break;
case 12:
var = cpi->fn_ptr[bs].vf(ref->buf, ref->stride,
CONVERT_TO_BYTEPTR(VP9_HIGH_VAR_OFFS_12),
0, &sse);
break;
case 8:
default:
var = cpi->fn_ptr[bs].vf(ref->buf, ref->stride,
CONVERT_TO_BYTEPTR(VP9_HIGH_VAR_OFFS_8),
0, &sse);
break;
}
return ROUND_POWER_OF_TWO(var, num_pels_log2_lookup[bs]);
}
#endif // CONFIG_VP9_HIGHBITDEPTH
static unsigned int get_sby_perpixel_diff_variance(VP9_COMP *cpi,
const struct buf_2d *ref,
int mi_row, int mi_col,
BLOCK_SIZE bs) {
const YV12_BUFFER_CONFIG *last = get_ref_frame_buffer(cpi, LAST_FRAME);
const uint8_t* last_y = &last->y_buffer[mi_row * MI_SIZE * last->y_stride +
mi_col * MI_SIZE];
unsigned int sse;
const unsigned int var = cpi->fn_ptr[bs].vf(ref->buf, ref->stride,
last_y, last->y_stride, &sse);
return ROUND_POWER_OF_TWO(var, num_pels_log2_lookup[bs]);
}
static BLOCK_SIZE get_rd_var_based_fixed_partition(VP9_COMP *cpi, MACROBLOCK *x,
int mi_row,
int mi_col) {
unsigned int var = get_sby_perpixel_diff_variance(cpi, &x->plane[0].src,
mi_row, mi_col,
BLOCK_64X64);
if (var < 8)
return BLOCK_64X64;
else if (var < 128)
return BLOCK_32X32;
else if (var < 2048)
return BLOCK_16X16;
else
return BLOCK_8X8;
}
static BLOCK_SIZE get_nonrd_var_based_fixed_partition(VP9_COMP *cpi,
MACROBLOCK *x,
int mi_row,
int mi_col) {
unsigned int var = get_sby_perpixel_diff_variance(cpi, &x->plane[0].src,
mi_row, mi_col,
BLOCK_64X64);
if (var < 4)
return BLOCK_64X64;
else if (var < 10)
return BLOCK_32X32;
else
return BLOCK_16X16;
}
// Lighter version of set_offsets that only sets the mode info
// pointers.
static INLINE void set_modeinfo_offsets(VP9_COMMON *const cm,
MACROBLOCKD *const xd,
int mi_row,
int mi_col) {
const int idx_str = xd->mi_stride * mi_row + mi_col;
xd->mi = cm->mi + idx_str;
xd->mi[0].src_mi = &xd->mi[0];
}
static void set_offsets(VP9_COMP *cpi, const TileInfo *const tile,
MACROBLOCK *const x, int mi_row, int mi_col,
BLOCK_SIZE bsize) {
VP9_COMMON *const cm = &cpi->common;
MACROBLOCKD *const xd = &x->e_mbd;
MB_MODE_INFO *mbmi;
const int mi_width = num_8x8_blocks_wide_lookup[bsize];
const int mi_height = num_8x8_blocks_high_lookup[bsize];
const struct segmentation *const seg = &cm->seg;
set_skip_context(xd, mi_row, mi_col);
set_modeinfo_offsets(cm, xd, mi_row, mi_col);
mbmi = &xd->mi[0].src_mi->mbmi;
// Set up destination pointers.
vp9_setup_dst_planes(xd->plane, get_frame_new_buffer(cm), mi_row, mi_col);
// Set up limit values for MV components.
// Mv beyond the range do not produce new/different prediction block.
x->mv_row_min = -(((mi_row + mi_height) * MI_SIZE) + VP9_INTERP_EXTEND);
x->mv_col_min = -(((mi_col + mi_width) * MI_SIZE) + VP9_INTERP_EXTEND);
x->mv_row_max = (cm->mi_rows - mi_row) * MI_SIZE + VP9_INTERP_EXTEND;
x->mv_col_max = (cm->mi_cols - mi_col) * MI_SIZE + VP9_INTERP_EXTEND;
// Set up distance of MB to edge of frame in 1/8th pel units.
assert(!(mi_col & (mi_width - 1)) && !(mi_row & (mi_height - 1)));
set_mi_row_col(xd, tile, mi_row, mi_height, mi_col, mi_width,
cm->mi_rows, cm->mi_cols);
// Set up source buffers.
vp9_setup_src_planes(x, cpi->Source, mi_row, mi_col);
// R/D setup.
x->rddiv = cpi->rd.RDDIV;
x->rdmult = cpi->rd.RDMULT;
// Setup segment ID.
if (seg->enabled) {
if (cpi->oxcf.aq_mode != VARIANCE_AQ) {
const uint8_t *const map = seg->update_map ? cpi->segmentation_map
: cm->last_frame_seg_map;
mbmi->segment_id = vp9_get_segment_id(cm, map, bsize, mi_row, mi_col);
}
vp9_init_plane_quantizers(cpi, x);
x->encode_breakout = cpi->segment_encode_breakout[mbmi->segment_id];
} else {
mbmi->segment_id = 0;
x->encode_breakout = cpi->encode_breakout;
}
}
static void duplicate_mode_info_in_sb(VP9_COMMON *cm, MACROBLOCKD *xd,
int mi_row, int mi_col,
BLOCK_SIZE bsize) {
const int block_width = num_8x8_blocks_wide_lookup[bsize];
const int block_height = num_8x8_blocks_high_lookup[bsize];
int i, j;
for (j = 0; j < block_height; ++j)
for (i = 0; i < block_width; ++i) {
if (mi_row + j < cm->mi_rows && mi_col + i < cm->mi_cols)
xd->mi[j * xd->mi_stride + i].src_mi = &xd->mi[0];
}
}
static void set_block_size(VP9_COMP * const cpi,
MACROBLOCKD *const xd,
int mi_row, int mi_col,
BLOCK_SIZE bsize) {
if (cpi->common.mi_cols > mi_col && cpi->common.mi_rows > mi_row) {
set_modeinfo_offsets(&cpi->common, xd, mi_row, mi_col);
xd->mi[0].src_mi->mbmi.sb_type = bsize;
}
}
typedef struct {
int64_t sum_square_error;
int64_t sum_error;
int count;
int variance;
} var;
typedef struct {
var none;
var horz[2];
var vert[2];
} partition_variance;
typedef struct {
partition_variance part_variances;
var split[4];
} v4x4;
typedef struct {
partition_variance part_variances;
v4x4 split[4];
} v8x8;
typedef struct {
partition_variance part_variances;
v8x8 split[4];
} v16x16;
typedef struct {
partition_variance part_variances;
v16x16 split[4];
} v32x32;
typedef struct {
partition_variance part_variances;
v32x32 split[4];
} v64x64;
typedef struct {
partition_variance *part_variances;
var *split[4];
} variance_node;
typedef enum {
V16X16,
V32X32,
V64X64,
} TREE_LEVEL;
static void tree_to_node(void *data, BLOCK_SIZE bsize, variance_node *node) {
int i;
node->part_variances = NULL;
vpx_memset(node->split, 0, sizeof(node->split));
switch (bsize) {
case BLOCK_64X64: {
v64x64 *vt = (v64x64 *) data;
node->part_variances = &vt->part_variances;
for (i = 0; i < 4; i++)
node->split[i] = &vt->split[i].part_variances.none;
break;
}
case BLOCK_32X32: {
v32x32 *vt = (v32x32 *) data;
node->part_variances = &vt->part_variances;
for (i = 0; i < 4; i++)
node->split[i] = &vt->split[i].part_variances.none;
break;
}
case BLOCK_16X16: {
v16x16 *vt = (v16x16 *) data;
node->part_variances = &vt->part_variances;
for (i = 0; i < 4; i++)
node->split[i] = &vt->split[i].part_variances.none;
break;
}
case BLOCK_8X8: {
v8x8 *vt = (v8x8 *) data;
node->part_variances = &vt->part_variances;
for (i = 0; i < 4; i++)
node->split[i] = &vt->split[i].part_variances.none;
break;
}
case BLOCK_4X4: {
v4x4 *vt = (v4x4 *) data;
node->part_variances = &vt->part_variances;
for (i = 0; i < 4; i++)
node->split[i] = &vt->split[i];
break;
}
default: {
assert(0);
break;
}
}
}
// Set variance values given sum square error, sum error, count.
static void fill_variance(int64_t s2, int64_t s, int c, var *v) {
v->sum_square_error = s2;
v->sum_error = s;
v->count = c;
if (c > 0)
v->variance = (int)(256 *
(v->sum_square_error - v->sum_error * v->sum_error /
v->count) / v->count);
else
v->variance = 0;
}
void sum_2_variances(const var *a, const var *b, var *r) {
fill_variance(a->sum_square_error + b->sum_square_error,
a->sum_error + b->sum_error, a->count + b->count, r);
}
static void fill_variance_tree(void *data, BLOCK_SIZE bsize) {
variance_node node;
tree_to_node(data, bsize, &node);
sum_2_variances(node.split[0], node.split[1], &node.part_variances->horz[0]);
sum_2_variances(node.split[2], node.split[3], &node.part_variances->horz[1]);
sum_2_variances(node.split[0], node.split[2], &node.part_variances->vert[0]);
sum_2_variances(node.split[1], node.split[3], &node.part_variances->vert[1]);
sum_2_variances(&node.part_variances->vert[0], &node.part_variances->vert[1],
&node.part_variances->none);
}
static int set_vt_partitioning(VP9_COMP *cpi,
MACROBLOCKD *const xd,
void *data,
BLOCK_SIZE bsize,
int mi_row,
int mi_col) {
VP9_COMMON * const cm = &cpi->common;
variance_node vt;
const int block_width = num_8x8_blocks_wide_lookup[bsize];
const int block_height = num_8x8_blocks_high_lookup[bsize];
// TODO(marpan): Adjust/tune these thresholds.
const int threshold_multiplier = cm->frame_type == KEY_FRAME ? 80 : 4;
int64_t threshold =
(int64_t)(threshold_multiplier *
vp9_convert_qindex_to_q(cm->base_qindex, cm->bit_depth));
int64_t threshold_bsize_ref = threshold << 6;
int64_t threshold_low = threshold;
BLOCK_SIZE bsize_ref = BLOCK_16X16;
assert(block_height == block_width);
tree_to_node(data, bsize, &vt);
if (cm->frame_type == KEY_FRAME) {
bsize_ref = BLOCK_8X8;
// Choose lower thresholds for key frame variance to favor split.
threshold_bsize_ref = threshold >> 1;
threshold_low = threshold >> 2;
}
// For bsize=bsize_ref (16x16/8x8 for 8x8/4x4 downsampling), select if
// variance is below threshold, otherwise split will be selected.
// No check for vert/horiz split as too few samples for variance.
if (bsize == bsize_ref) {
if (mi_col + block_width / 2 < cm->mi_cols &&
mi_row + block_height / 2 < cm->mi_rows &&
vt.part_variances->none.variance < threshold_bsize_ref) {
set_block_size(cpi, xd, mi_row, mi_col, bsize);
return 1;
}
return 0;
} else if (bsize > bsize_ref) {
// For key frame, for bsize above 32X32, or very high variance, take split.
if (cm->frame_type == KEY_FRAME &&
(bsize > BLOCK_32X32 ||
vt.part_variances->none.variance > (threshold << 2))) {
return 0;
}
// If variance is low, take the bsize (no split).
if (mi_col + block_width / 2 < cm->mi_cols &&
mi_row + block_height / 2 < cm->mi_rows &&
vt.part_variances->none.variance < threshold_low) {
set_block_size(cpi, xd, mi_row, mi_col, bsize);
return 1;
}
// Check vertical split.
if (mi_row + block_height / 2 < cm->mi_rows &&
vt.part_variances->vert[0].variance < threshold_low &&
vt.part_variances->vert[1].variance < threshold_low) {
BLOCK_SIZE subsize = get_subsize(bsize, PARTITION_VERT);
set_block_size(cpi, xd, mi_row, mi_col, subsize);
set_block_size(cpi, xd, mi_row, mi_col + block_width / 2, subsize);
return 1;
}
// Check horizontal split.
if (mi_col + block_width / 2 < cm->mi_cols &&
vt.part_variances->horz[0].variance < threshold_low &&
vt.part_variances->horz[1].variance < threshold_low) {
BLOCK_SIZE subsize = get_subsize(bsize, PARTITION_HORZ);
set_block_size(cpi, xd, mi_row, mi_col, subsize);
set_block_size(cpi, xd, mi_row + block_height / 2, mi_col, subsize);
return 1;
}
return 0;
}
return 0;
}
// This function chooses partitioning based on the variance between source and
// reconstructed last, where variance is computed for downsampled inputs.
// Currently 8x8 downsampling is used for delta frames, 4x4 for key frames.
static void choose_partitioning(VP9_COMP *cpi,
const TileInfo *const tile,
MACROBLOCK *x,
int mi_row, int mi_col) {
VP9_COMMON * const cm = &cpi->common;
MACROBLOCKD *xd = &x->e_mbd;
int i, j, k, m;
v64x64 vt;
uint8_t *s;
const uint8_t *d;
int sp;
int dp;
int pixels_wide = 64, pixels_high = 64;
const YV12_BUFFER_CONFIG *yv12 = get_ref_frame_buffer(cpi, LAST_FRAME);
const struct scale_factors *const sf = &cm->frame_refs[LAST_FRAME - 1].sf;
vp9_clear_system_state();
set_offsets(cpi, tile, x, mi_row, mi_col, BLOCK_64X64);
if (xd->mb_to_right_edge < 0)
pixels_wide += (xd->mb_to_right_edge >> 3);
if (xd->mb_to_bottom_edge < 0)
pixels_high += (xd->mb_to_bottom_edge >> 3);
s = x->plane[0].src.buf;
sp = x->plane[0].src.stride;
if (cm->frame_type != KEY_FRAME) {
vp9_setup_pre_planes(xd, 0, yv12, mi_row, mi_col, sf);
xd->mi[0].src_mi->mbmi.ref_frame[0] = LAST_FRAME;
xd->mi[0].src_mi->mbmi.sb_type = BLOCK_64X64;
xd->mi[0].src_mi->mbmi.mv[0].as_int = 0;
vp9_build_inter_predictors_sby(xd, mi_row, mi_col, BLOCK_64X64);
d = xd->plane[0].dst.buf;
dp = xd->plane[0].dst.stride;
} else {
d = VP9_VAR_OFFS;
dp = 0;
#if CONFIG_VP9_HIGHBITDEPTH
if (xd->cur_buf->flags & YV12_FLAG_HIGHBITDEPTH) {
switch (xd->bd) {
case 10:
d = CONVERT_TO_BYTEPTR(VP9_HIGH_VAR_OFFS_10);
break;
case 12:
d = CONVERT_TO_BYTEPTR(VP9_HIGH_VAR_OFFS_12);
break;
case 8:
default:
d = CONVERT_TO_BYTEPTR(VP9_HIGH_VAR_OFFS_8);
break;
}
}
#endif // CONFIG_VP9_HIGHBITDEPTH
}
// Fill in the entire tree of 8x8 variances for splits.
for (i = 0; i < 4; i++) {
const int x32_idx = ((i & 1) << 5);
const int y32_idx = ((i >> 1) << 5);
for (j = 0; j < 4; j++) {
const int x16_idx = x32_idx + ((j & 1) << 4);
const int y16_idx = y32_idx + ((j >> 1) << 4);
v16x16 *vst = &vt.split[i].split[j];
for (k = 0; k < 4; k++) {
int x8_idx = x16_idx + ((k & 1) << 3);
int y8_idx = y16_idx + ((k >> 1) << 3);
if (cm->frame_type != KEY_FRAME) {
unsigned int sse = 0;
int sum = 0;
if (x8_idx < pixels_wide && y8_idx < pixels_high) {
int s_avg, d_avg;
#if CONFIG_VP9_HIGHBITDEPTH
if (xd->cur_buf->flags & YV12_FLAG_HIGHBITDEPTH) {
s_avg = vp9_highbd_avg_8x8(s + y8_idx * sp + x8_idx, sp);
d_avg = vp9_highbd_avg_8x8(d + y8_idx * dp + x8_idx, dp);
} else {
s_avg = vp9_avg_8x8(s + y8_idx * sp + x8_idx, sp);
d_avg = vp9_avg_8x8(d + y8_idx * dp + x8_idx, dp);
}
#else
s_avg = vp9_avg_8x8(s + y8_idx * sp + x8_idx, sp);
d_avg = vp9_avg_8x8(d + y8_idx * dp + x8_idx, dp);
#endif
sum = s_avg - d_avg;
sse = sum * sum;
}
// If variance is based on 8x8 downsampling, we stop here and have
// one sample for 8x8 block (so use 1 for count in fill_variance),
// which of course means variance = 0 for 8x8 block.
fill_variance(sse, sum, 1, &vst->split[k].part_variances.none);
} else {
// For key frame, go down to 4x4.
v8x8 *vst2 = &vst->split[k];
for (m = 0; m < 4; m++) {
int x4_idx = x8_idx + ((m & 1) << 2);
int y4_idx = y8_idx + ((m >> 1) << 2);
unsigned int sse = 0;
int sum = 0;
if (x4_idx < pixels_wide && y4_idx < pixels_high) {
int s_avg = vp9_avg_4x4(s + y4_idx * sp + x4_idx, sp);
// For key frame, reference is set to 128.
sum = s_avg - 128;
sse = sum * sum;
}
// If variance is based on 4x4 downsampling, we stop here and have
// one sample for 4x4 block (so use 1 for count in fill_variance),
// which of course means variance = 0 for 4x4 block.
fill_variance(sse, sum, 1, &vst2->split[m].part_variances.none);
}
}
}
}
}
// Fill the rest of the variance tree by summing split partition values.
for (i = 0; i < 4; i++) {
for (j = 0; j < 4; j++) {
if (cm->frame_type == KEY_FRAME) {
for (m = 0; m < 4; m++) {
fill_variance_tree(&vt.split[i].split[j].split[m], BLOCK_8X8);
}
}
fill_variance_tree(&vt.split[i].split[j], BLOCK_16X16);
}
fill_variance_tree(&vt.split[i], BLOCK_32X32);
}
fill_variance_tree(&vt, BLOCK_64X64);
// Now go through the entire structure, splitting every block size until
// we get to one that's got a variance lower than our threshold.
if ( mi_col + 8 > cm->mi_cols || mi_row + 8 > cm->mi_rows ||
!set_vt_partitioning(cpi, xd, &vt, BLOCK_64X64, mi_row, mi_col)) {
for (i = 0; i < 4; ++i) {
const int x32_idx = ((i & 1) << 2);
const int y32_idx = ((i >> 1) << 2);
if (!set_vt_partitioning(cpi, xd, &vt.split[i], BLOCK_32X32,
(mi_row + y32_idx), (mi_col + x32_idx))) {
for (j = 0; j < 4; ++j) {
const int x16_idx = ((j & 1) << 1);
const int y16_idx = ((j >> 1) << 1);
// Note: If 8x8 downsampling is used for variance calculation we
// cannot really select block size 8x8 (or even 8x16/16x8), since we
// don't have sufficient samples for variance. So on delta frames,
// 8x8 partition is only set if variance of the 16x16 block is very
// high. For key frames, 4x4 downsampling is used, so we can better
// select 8x16/16x8 and 8x8. 4x4 partition can potentially be set
// used here too, but for now 4x4 is not allowed.
if (!set_vt_partitioning(cpi, xd, &vt.split[i].split[j],
BLOCK_16X16,
mi_row + y32_idx + y16_idx,
mi_col + x32_idx + x16_idx)) {
for (k = 0; k < 4; ++k) {
const int x8_idx = (k & 1);
const int y8_idx = (k >> 1);
// TODO(marpan): Allow for setting 4x4 partition on key frame.
/*
if (cm->frame_type == KEY_FRAME) {
if (!set_vt_partitioning(cpi, xd,
&vt.split[i].split[j].split[k],
BLOCK_8X8,
mi_row + y32_idx + y16_idx + y8_idx,
mi_col + x32_idx + x16_idx + x8_idx)) {
set_block_size(cpi, xd,
(mi_row + y32_idx + y16_idx + y8_idx),
(mi_col + x32_idx + x16_idx + x8_idx),
BLOCK_4X4);
}
} else {
*/
set_block_size(cpi, xd,
(mi_row + y32_idx + y16_idx + y8_idx),
(mi_col + x32_idx + x16_idx + x8_idx),
BLOCK_8X8);
// }
}
}
}
}
}
}
}
static void update_state(VP9_COMP *cpi, ThreadData *td,
PICK_MODE_CONTEXT *ctx,
int mi_row, int mi_col, BLOCK_SIZE bsize,
int output_enabled) {
int i, x_idx, y;
VP9_COMMON *const cm = &cpi->common;
RD_COUNTS *const rdc = &td->rd_counts;
MACROBLOCK *const x = &td->mb;
MACROBLOCKD *const xd = &x->e_mbd;
struct macroblock_plane *const p = x->plane;
struct macroblockd_plane *const pd = xd->plane;
MODE_INFO *mi = &ctx->mic;
MB_MODE_INFO *const mbmi = &xd->mi[0].src_mi->mbmi;
MODE_INFO *mi_addr = &xd->mi[0];
const struct segmentation *const seg = &cm->seg;
const int bw = num_8x8_blocks_wide_lookup[mi->mbmi.sb_type];
const int bh = num_8x8_blocks_high_lookup[mi->mbmi.sb_type];
const int x_mis = MIN(bw, cm->mi_cols - mi_col);
const int y_mis = MIN(bh, cm->mi_rows - mi_row);
MV_REF *const frame_mvs =
cm->cur_frame->mvs + mi_row * cm->mi_cols + mi_col;
int w, h;
const int mis = cm->mi_stride;
const int mi_width = num_8x8_blocks_wide_lookup[bsize];
const int mi_height = num_8x8_blocks_high_lookup[bsize];
int max_plane;
assert(mi->mbmi.sb_type == bsize);
*mi_addr = *mi;
mi_addr->src_mi = mi_addr;
// If segmentation in use
if (seg->enabled && output_enabled) {
// For in frame complexity AQ copy the segment id from the segment map.
if (cpi->oxcf.aq_mode == COMPLEXITY_AQ) {
const uint8_t *const map = seg->update_map ? cpi->segmentation_map
: cm->last_frame_seg_map;
mi_addr->mbmi.segment_id =
vp9_get_segment_id(cm, map, bsize, mi_row, mi_col);
}
// Else for cyclic refresh mode update the segment map, set the segment id
// and then update the quantizer.
if (cpi->oxcf.aq_mode == CYCLIC_REFRESH_AQ) {
vp9_cyclic_refresh_update_segment(cpi, &xd->mi[0].src_mi->mbmi,
mi_row, mi_col, bsize, 1, ctx->rate);
}
}
max_plane = is_inter_block(mbmi) ? MAX_MB_PLANE : 1;
for (i = 0; i < max_plane; ++i) {
p[i].coeff = ctx->coeff_pbuf[i][1];
p[i].qcoeff = ctx->qcoeff_pbuf[i][1];
pd[i].dqcoeff = ctx->dqcoeff_pbuf[i][1];
p[i].eobs = ctx->eobs_pbuf[i][1];
}
for (i = max_plane; i < MAX_MB_PLANE; ++i) {
p[i].coeff = ctx->coeff_pbuf[i][2];
p[i].qcoeff = ctx->qcoeff_pbuf[i][2];
pd[i].dqcoeff = ctx->dqcoeff_pbuf[i][2];
p[i].eobs = ctx->eobs_pbuf[i][2];
}
// Restore the coding context of the MB to that that was in place
// when the mode was picked for it
for (y = 0; y < mi_height; y++)
for (x_idx = 0; x_idx < mi_width; x_idx++)
if ((xd->mb_to_right_edge >> (3 + MI_SIZE_LOG2)) + mi_width > x_idx
&& (xd->mb_to_bottom_edge >> (3 + MI_SIZE_LOG2)) + mi_height > y) {
xd->mi[x_idx + y * mis].src_mi = mi_addr;
}
if (cpi->oxcf.aq_mode)
vp9_init_plane_quantizers(cpi, x);
// FIXME(rbultje) I'm pretty sure this should go to the end of this block
// (i.e. after the output_enabled)
if (bsize < BLOCK_32X32) {
if (bsize < BLOCK_16X16)
ctx->tx_rd_diff[ALLOW_16X16] = ctx->tx_rd_diff[ALLOW_8X8];
ctx->tx_rd_diff[ALLOW_32X32] = ctx->tx_rd_diff[ALLOW_16X16];
}
if (is_inter_block(mbmi) && mbmi->sb_type < BLOCK_8X8) {
mbmi->mv[0].as_int = mi->bmi[3].as_mv[0].as_int;
mbmi->mv[1].as_int = mi->bmi[3].as_mv[1].as_int;
}
x->skip = ctx->skip;
vpx_memcpy(x->zcoeff_blk[mbmi->tx_size], ctx->zcoeff_blk,
sizeof(uint8_t) * ctx->num_4x4_blk);
if (!output_enabled)
return;
if (!vp9_segfeature_active(&cm->seg, mbmi->segment_id, SEG_LVL_SKIP)) {
for (i = 0; i < TX_MODES; i++)
rdc->tx_select_diff[i] += ctx->tx_rd_diff[i];
}
#if CONFIG_INTERNAL_STATS
if (frame_is_intra_only(cm)) {
static const int kf_mode_index[] = {
THR_DC /*DC_PRED*/,
THR_V_PRED /*V_PRED*/,
THR_H_PRED /*H_PRED*/,
THR_D45_PRED /*D45_PRED*/,
THR_D135_PRED /*D135_PRED*/,
THR_D117_PRED /*D117_PRED*/,
THR_D153_PRED /*D153_PRED*/,
THR_D207_PRED /*D207_PRED*/,
THR_D63_PRED /*D63_PRED*/,
THR_TM /*TM_PRED*/,
};
++cpi->mode_chosen_counts[kf_mode_index[mbmi->mode]];
} else {
// Note how often each mode chosen as best
++cpi->mode_chosen_counts[ctx->best_mode_index];
}
#endif
if (!frame_is_intra_only(cm)) {
if (is_inter_block(mbmi)) {
vp9_update_mv_count(td);
if (cm->interp_filter == SWITCHABLE) {
const int ctx = vp9_get_pred_context_switchable_interp(xd);
++td->counts->switchable_interp[ctx][mbmi->interp_filter];
}
}
rdc->comp_pred_diff[SINGLE_REFERENCE] += ctx->single_pred_diff;
rdc->comp_pred_diff[COMPOUND_REFERENCE] += ctx->comp_pred_diff;
rdc->comp_pred_diff[REFERENCE_MODE_SELECT] += ctx->hybrid_pred_diff;
for (i = 0; i < SWITCHABLE_FILTER_CONTEXTS; ++i)
rdc->filter_diff[i] += ctx->best_filter_diff[i];
}
for (h = 0; h < y_mis; ++h) {
MV_REF *const frame_mv = frame_mvs + h * cm->mi_cols;
for (w = 0; w < x_mis; ++w) {
MV_REF *const mv = frame_mv + w;
mv->ref_frame[0] = mi->src_mi->mbmi.ref_frame[0];
mv->ref_frame[1] = mi->src_mi->mbmi.ref_frame[1];
mv->mv[0].as_int = mi->src_mi->mbmi.mv[0].as_int;
mv->mv[1].as_int = mi->src_mi->mbmi.mv[1].as_int;
}
}
}
void vp9_setup_src_planes(MACROBLOCK *x, const YV12_BUFFER_CONFIG *src,
int mi_row, int mi_col) {
uint8_t *const buffers[3] = {src->y_buffer, src->u_buffer, src->v_buffer };
const int strides[3] = {src->y_stride, src->uv_stride, src->uv_stride };
int i;
// Set current frame pointer.
x->e_mbd.cur_buf = src;
for (i = 0; i < MAX_MB_PLANE; i++)
setup_pred_plane(&x->plane[i].src, buffers[i], strides[i], mi_row, mi_col,
NULL, x->e_mbd.plane[i].subsampling_x,
x->e_mbd.plane[i].subsampling_y);
}
static void set_mode_info_seg_skip(MACROBLOCK *x, TX_MODE tx_mode,
RD_COST *rd_cost, BLOCK_SIZE bsize) {
MACROBLOCKD *const xd = &x->e_mbd;
MB_MODE_INFO *const mbmi = &xd->mi[0].src_mi->mbmi;
INTERP_FILTER filter_ref;
if (xd->up_available)
filter_ref = xd->mi[-xd->mi_stride].src_mi->mbmi.interp_filter;
else if (xd->left_available)
filter_ref = xd->mi[-1].src_mi->mbmi.interp_filter;
else
filter_ref = EIGHTTAP;
mbmi->sb_type = bsize;
mbmi->mode = ZEROMV;
mbmi->tx_size = MIN(max_txsize_lookup[bsize],
tx_mode_to_biggest_tx_size[tx_mode]);
mbmi->skip = 1;
mbmi->uv_mode = DC_PRED;
mbmi->ref_frame[0] = LAST_FRAME;
mbmi->ref_frame[1] = NONE;
mbmi->mv[0].as_int = 0;
mbmi->interp_filter = filter_ref;
xd->mi[0].src_mi->bmi[0].as_mv[0].as_int = 0;
x->skip = 1;
vp9_rd_cost_init(rd_cost);
}
static void rd_pick_sb_modes(VP9_COMP *cpi,
TileDataEnc *tile_data,
MACROBLOCK *const x,
int mi_row, int mi_col, RD_COST *rd_cost,
BLOCK_SIZE bsize, PICK_MODE_CONTEXT *ctx,
int64_t best_rd) {
VP9_COMMON *const cm = &cpi->common;
TileInfo *const tile_info = &tile_data->tile_info;
MACROBLOCKD *const xd = &x->e_mbd;
MB_MODE_INFO *mbmi;
struct macroblock_plane *const p = x->plane;
struct macroblockd_plane *const pd = xd->plane;
const AQ_MODE aq_mode = cpi->oxcf.aq_mode;
int i, orig_rdmult;
vp9_clear_system_state();
// Use the lower precision, but faster, 32x32 fdct for mode selection.
x->use_lp32x32fdct = 1;
set_offsets(cpi, tile_info, x, mi_row, mi_col, bsize);
mbmi = &xd->mi[0].src_mi->mbmi;
mbmi->sb_type = bsize;
for (i = 0; i < MAX_MB_PLANE; ++i) {
p[i].coeff = ctx->coeff_pbuf[i][0];
p[i].qcoeff = ctx->qcoeff_pbuf[i][0];
pd[i].dqcoeff = ctx->dqcoeff_pbuf[i][0];
p[i].eobs = ctx->eobs_pbuf[i][0];
}
ctx->is_coded = 0;
2014-08-15 02:25:21 +02:00
ctx->skippable = 0;
ctx->pred_pixel_ready = 0;
x->skip_recode = 0;
// Set to zero to make sure we do not use the previous encoded frame stats
mbmi->skip = 0;
#if CONFIG_VP9_HIGHBITDEPTH
if (xd->cur_buf->flags & YV12_FLAG_HIGHBITDEPTH) {
x->source_variance =
high_get_sby_perpixel_variance(cpi, &x->plane[0].src, bsize, xd->bd);
} else {
x->source_variance =
get_sby_perpixel_variance(cpi, &x->plane[0].src, bsize);
}
#else
x->source_variance = get_sby_perpixel_variance(cpi, &x->plane[0].src, bsize);
#endif // CONFIG_VP9_HIGHBITDEPTH
// Save rdmult before it might be changed, so it can be restored later.
orig_rdmult = x->rdmult;
if (aq_mode == VARIANCE_AQ) {
const int energy = bsize <= BLOCK_16X16 ? x->mb_energy
: vp9_block_energy(cpi, x, bsize);
int segment_qindex;
if (cm->frame_type == KEY_FRAME ||
cpi->refresh_alt_ref_frame ||
(cpi->refresh_golden_frame && !cpi->rc.is_src_frame_alt_ref)) {
mbmi->segment_id = vp9_vaq_segment_id(energy);
} else {
const uint8_t *const map = cm->seg.update_map ? cpi->segmentation_map
: cm->last_frame_seg_map;
mbmi->segment_id = vp9_get_segment_id(cm, map, bsize, mi_row, mi_col);
}
vp9_init_plane_quantizers(cpi, x);
vp9_clear_system_state();
segment_qindex = vp9_get_qindex(&cm->seg, mbmi->segment_id,
cm->base_qindex);
x->rdmult = vp9_compute_rd_mult(cpi, segment_qindex + cm->y_dc_delta_q);
} else if (aq_mode == COMPLEXITY_AQ) {
const int mi_offset = mi_row * cm->mi_cols + mi_col;
unsigned char complexity = cpi->complexity_map[mi_offset];
const int is_edge = (mi_row <= 1) || (mi_row >= (cm->mi_rows - 2)) ||
(mi_col <= 1) || (mi_col >= (cm->mi_cols - 2));
if (!is_edge && (complexity > 128))
x->rdmult += ((x->rdmult * (complexity - 128)) / 256);
} else if (aq_mode == CYCLIC_REFRESH_AQ) {
const uint8_t *const map = cm->seg.update_map ? cpi->segmentation_map
: cm->last_frame_seg_map;
// If segment 1, use rdmult for that segment.
if (vp9_get_segment_id(cm, map, bsize, mi_row, mi_col))
x->rdmult = vp9_cyclic_refresh_get_rdmult(cpi->cyclic_refresh);
}
// Find best coding mode & reconstruct the MB so it is available
// as a predictor for MBs that follow in the SB
if (frame_is_intra_only(cm)) {
vp9_rd_pick_intra_mode_sb(cpi, x, rd_cost, bsize, ctx, best_rd);
} else {
if (bsize >= BLOCK_8X8) {
if (vp9_segfeature_active(&cm->seg, mbmi->segment_id, SEG_LVL_SKIP))
vp9_rd_pick_inter_mode_sb_seg_skip(cpi, tile_data, x, rd_cost, bsize,
ctx, best_rd);
else
vp9_rd_pick_inter_mode_sb(cpi, tile_data, x, mi_row, mi_col,
rd_cost, bsize, ctx, best_rd);
} else {
vp9_rd_pick_inter_mode_sub8x8(cpi, tile_data, x, mi_row, mi_col,
rd_cost, bsize, ctx, best_rd);
}
}
x->rdmult = orig_rdmult;
// TODO(jingning) The rate-distortion optimization flow needs to be
// refactored to provide proper exit/return handle.
if (rd_cost->rate == INT_MAX)
rd_cost->rdcost = INT64_MAX;
ctx->rate = rd_cost->rate;
ctx->dist = rd_cost->dist;
}
static void update_stats(VP9_COMMON *cm, ThreadData *td) {
const MACROBLOCK *x = &td->mb;
const MACROBLOCKD *const xd = &x->e_mbd;
const MODE_INFO *const mi = xd->mi[0].src_mi;
const MB_MODE_INFO *const mbmi = &mi->mbmi;
if (!frame_is_intra_only(cm)) {
const int seg_ref_active = vp9_segfeature_active(&cm->seg, mbmi->segment_id,
SEG_LVL_REF_FRAME);
if (!seg_ref_active) {
FRAME_COUNTS *const counts = td->counts;
const int inter_block = is_inter_block(mbmi);
counts->intra_inter[vp9_get_intra_inter_context(xd)][inter_block]++;
// If the segment reference feature is enabled we have only a single
// reference frame allowed for the segment so exclude it from
// the reference frame counts used to work out probabilities.
if (inter_block) {
const MV_REFERENCE_FRAME ref0 = mbmi->ref_frame[0];
if (cm->reference_mode == REFERENCE_MODE_SELECT)
counts->comp_inter[vp9_get_reference_mode_context(cm, xd)]
[has_second_ref(mbmi)]++;
if (has_second_ref(mbmi)) {
counts->comp_ref[vp9_get_pred_context_comp_ref_p(cm, xd)]
[ref0 == GOLDEN_FRAME]++;
} else {
counts->single_ref[vp9_get_pred_context_single_ref_p1(xd)][0]
[ref0 != LAST_FRAME]++;
if (ref0 != LAST_FRAME)
counts->single_ref[vp9_get_pred_context_single_ref_p2(xd)][1]
[ref0 != GOLDEN_FRAME]++;
}
}
}
}
}
2010-05-18 17:58:33 +02:00
static void restore_context(MACROBLOCK *const x, int mi_row, int mi_col,
ENTROPY_CONTEXT a[16 * MAX_MB_PLANE],
ENTROPY_CONTEXT l[16 * MAX_MB_PLANE],
PARTITION_CONTEXT sa[8], PARTITION_CONTEXT sl[8],
BLOCK_SIZE bsize) {
MACROBLOCKD *const xd = &x->e_mbd;
int p;
const int num_4x4_blocks_wide = num_4x4_blocks_wide_lookup[bsize];
const int num_4x4_blocks_high = num_4x4_blocks_high_lookup[bsize];
int mi_width = num_8x8_blocks_wide_lookup[bsize];
int mi_height = num_8x8_blocks_high_lookup[bsize];
for (p = 0; p < MAX_MB_PLANE; p++) {
vpx_memcpy(
xd->above_context[p] + ((mi_col * 2) >> xd->plane[p].subsampling_x),
a + num_4x4_blocks_wide * p,
(sizeof(ENTROPY_CONTEXT) * num_4x4_blocks_wide) >>
xd->plane[p].subsampling_x);
vpx_memcpy(
xd->left_context[p]
+ ((mi_row & MI_MASK) * 2 >> xd->plane[p].subsampling_y),
l + num_4x4_blocks_high * p,
(sizeof(ENTROPY_CONTEXT) * num_4x4_blocks_high) >>
xd->plane[p].subsampling_y);
}
vpx_memcpy(xd->above_seg_context + mi_col, sa,
sizeof(*xd->above_seg_context) * mi_width);
vpx_memcpy(xd->left_seg_context + (mi_row & MI_MASK), sl,
sizeof(xd->left_seg_context[0]) * mi_height);
}
static void save_context(MACROBLOCK *const x, int mi_row, int mi_col,
ENTROPY_CONTEXT a[16 * MAX_MB_PLANE],
ENTROPY_CONTEXT l[16 * MAX_MB_PLANE],
PARTITION_CONTEXT sa[8], PARTITION_CONTEXT sl[8],
BLOCK_SIZE bsize) {
const MACROBLOCKD *const xd = &x->e_mbd;
int p;
const int num_4x4_blocks_wide = num_4x4_blocks_wide_lookup[bsize];
const int num_4x4_blocks_high = num_4x4_blocks_high_lookup[bsize];
int mi_width = num_8x8_blocks_wide_lookup[bsize];
int mi_height = num_8x8_blocks_high_lookup[bsize];
// buffer the above/left context information of the block in search.
for (p = 0; p < MAX_MB_PLANE; ++p) {
vpx_memcpy(
a + num_4x4_blocks_wide * p,
xd->above_context[p] + (mi_col * 2 >> xd->plane[p].subsampling_x),
(sizeof(ENTROPY_CONTEXT) * num_4x4_blocks_wide) >>
xd->plane[p].subsampling_x);
vpx_memcpy(
l + num_4x4_blocks_high * p,
xd->left_context[p]
+ ((mi_row & MI_MASK) * 2 >> xd->plane[p].subsampling_y),
(sizeof(ENTROPY_CONTEXT) * num_4x4_blocks_high) >>
xd->plane[p].subsampling_y);
}
vpx_memcpy(sa, xd->above_seg_context + mi_col,
sizeof(*xd->above_seg_context) * mi_width);
vpx_memcpy(sl, xd->left_seg_context + (mi_row & MI_MASK),
sizeof(xd->left_seg_context[0]) * mi_height);
}
static void encode_b(VP9_COMP *cpi, const TileInfo *const tile,
ThreadData *td,
TOKENEXTRA **tp, int mi_row, int mi_col,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
int output_enabled, BLOCK_SIZE bsize,
PICK_MODE_CONTEXT *ctx) {
MACROBLOCK *const x = &td->mb;
set_offsets(cpi, tile, x, mi_row, mi_col, bsize);
update_state(cpi, td, ctx, mi_row, mi_col, bsize, output_enabled);
encode_superblock(cpi, td, tp, output_enabled, mi_row, mi_col, bsize, ctx);
2010-05-18 17:58:33 +02:00
if (output_enabled) {
update_stats(&cpi->common, td);
(*tp)->token = EOSB_TOKEN;
(*tp)++;
}
}
static void encode_sb(VP9_COMP *cpi, ThreadData *td,
const TileInfo *const tile,
TOKENEXTRA **tp, int mi_row, int mi_col,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
int output_enabled, BLOCK_SIZE bsize,
PC_TREE *pc_tree) {
VP9_COMMON *const cm = &cpi->common;
MACROBLOCK *const x = &td->mb;
MACROBLOCKD *const xd = &x->e_mbd;
const int bsl = b_width_log2_lookup[bsize], hbs = (1 << bsl) / 4;
int ctx;
PARTITION_TYPE partition;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
BLOCK_SIZE subsize = bsize;
if (mi_row >= cm->mi_rows || mi_col >= cm->mi_cols)
return;
if (bsize >= BLOCK_8X8) {
ctx = partition_plane_context(xd, mi_row, mi_col, bsize);
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
subsize = get_subsize(bsize, pc_tree->partitioning);
} else {
ctx = 0;
subsize = BLOCK_4X4;
}
partition = partition_lookup[bsl][subsize];
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
if (output_enabled && bsize != BLOCK_4X4)
td->counts->partition[ctx][partition]++;
switch (partition) {
case PARTITION_NONE:
encode_b(cpi, tile, td, tp, mi_row, mi_col, output_enabled, subsize,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
&pc_tree->none);
break;
case PARTITION_VERT:
encode_b(cpi, tile, td, tp, mi_row, mi_col, output_enabled, subsize,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
&pc_tree->vertical[0]);
if (mi_col + hbs < cm->mi_cols && bsize > BLOCK_8X8) {
encode_b(cpi, tile, td, tp, mi_row, mi_col + hbs, output_enabled,
subsize, &pc_tree->vertical[1]);
}
break;
case PARTITION_HORZ:
encode_b(cpi, tile, td, tp, mi_row, mi_col, output_enabled, subsize,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
&pc_tree->horizontal[0]);
if (mi_row + hbs < cm->mi_rows && bsize > BLOCK_8X8) {
encode_b(cpi, tile, td, tp, mi_row + hbs, mi_col, output_enabled,
subsize, &pc_tree->horizontal[1]);
}
break;
case PARTITION_SPLIT:
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
if (bsize == BLOCK_8X8) {
encode_b(cpi, tile, td, tp, mi_row, mi_col, output_enabled, subsize,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->leaf_split[0]);
} else {
encode_sb(cpi, td, tile, tp, mi_row, mi_col, output_enabled, subsize,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->split[0]);
encode_sb(cpi, td, tile, tp, mi_row, mi_col + hbs, output_enabled,
subsize, pc_tree->split[1]);
encode_sb(cpi, td, tile, tp, mi_row + hbs, mi_col, output_enabled,
subsize, pc_tree->split[2]);
encode_sb(cpi, td, tile, tp, mi_row + hbs, mi_col + hbs, output_enabled,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
subsize, pc_tree->split[3]);
}
break;
default:
assert(0 && "Invalid partition type.");
break;
}
if (partition != PARTITION_SPLIT || bsize == BLOCK_8X8)
update_partition_context(xd, mi_row, mi_col, subsize, bsize);
}
2010-05-18 17:58:33 +02:00
// Check to see if the given partition size is allowed for a specified number
// of 8x8 block rows and columns remaining in the image.
// If not then return the largest allowed partition size
static BLOCK_SIZE find_partition_size(BLOCK_SIZE bsize,
int rows_left, int cols_left,
int *bh, int *bw) {
if (rows_left <= 0 || cols_left <= 0) {
return MIN(bsize, BLOCK_8X8);
} else {
for (; bsize > 0; bsize -= 3) {
*bh = num_8x8_blocks_high_lookup[bsize];
*bw = num_8x8_blocks_wide_lookup[bsize];
if ((*bh <= rows_left) && (*bw <= cols_left)) {
break;
}
}
}
return bsize;
}
static void set_partial_b64x64_partition(MODE_INFO *mi, int mis,
int bh_in, int bw_in, int row8x8_remaining, int col8x8_remaining,
BLOCK_SIZE bsize, MODE_INFO *mi_8x8) {
int bh = bh_in;
int r, c;
for (r = 0; r < MI_BLOCK_SIZE; r += bh) {
int bw = bw_in;
for (c = 0; c < MI_BLOCK_SIZE; c += bw) {
const int index = r * mis + c;
mi_8x8[index].src_mi = mi + index;
mi_8x8[index].src_mi->mbmi.sb_type = find_partition_size(bsize,
row8x8_remaining - r, col8x8_remaining - c, &bh, &bw);
}
}
}
// This function attempts to set all mode info entries in a given SB64
// to the same block partition size.
// However, at the bottom and right borders of the image the requested size
// may not be allowed in which case this code attempts to choose the largest
// allowable partition.
static void set_fixed_partitioning(VP9_COMP *cpi, const TileInfo *const tile,
MODE_INFO *mi_8x8, int mi_row, int mi_col,
BLOCK_SIZE bsize) {
VP9_COMMON *const cm = &cpi->common;
const int mis = cm->mi_stride;
const int row8x8_remaining = tile->mi_row_end - mi_row;
const int col8x8_remaining = tile->mi_col_end - mi_col;
int block_row, block_col;
MODE_INFO *mi_upper_left = cm->mi + mi_row * mis + mi_col;
int bh = num_8x8_blocks_high_lookup[bsize];
int bw = num_8x8_blocks_wide_lookup[bsize];
assert((row8x8_remaining > 0) && (col8x8_remaining > 0));
// Apply the requested partition size to the SB64 if it is all "in image"
if ((col8x8_remaining >= MI_BLOCK_SIZE) &&
(row8x8_remaining >= MI_BLOCK_SIZE)) {
for (block_row = 0; block_row < MI_BLOCK_SIZE; block_row += bh) {
for (block_col = 0; block_col < MI_BLOCK_SIZE; block_col += bw) {
int index = block_row * mis + block_col;
mi_8x8[index].src_mi = mi_upper_left + index;
mi_8x8[index].src_mi->mbmi.sb_type = bsize;
}
}
} else {
// Else this is a partial SB64.
set_partial_b64x64_partition(mi_upper_left, mis, bh, bw, row8x8_remaining,
col8x8_remaining, bsize, mi_8x8);
}
}
const struct {
int row;
int col;
} coord_lookup[16] = {
// 32x32 index = 0
{0, 0}, {0, 2}, {2, 0}, {2, 2},
// 32x32 index = 1
{0, 4}, {0, 6}, {2, 4}, {2, 6},
// 32x32 index = 2
{4, 0}, {4, 2}, {6, 0}, {6, 2},
// 32x32 index = 3
{4, 4}, {4, 6}, {6, 4}, {6, 6},
};
static void set_source_var_based_partition(VP9_COMP *cpi,
const TileInfo *const tile,
MACROBLOCK *const x,
MODE_INFO *mi_8x8,
int mi_row, int mi_col) {
VP9_COMMON *const cm = &cpi->common;
const int mis = cm->mi_stride;
const int row8x8_remaining = tile->mi_row_end - mi_row;
const int col8x8_remaining = tile->mi_col_end - mi_col;
MODE_INFO *mi_upper_left = cm->mi + mi_row * mis + mi_col;
vp9_setup_src_planes(x, cpi->Source, mi_row, mi_col);
assert((row8x8_remaining > 0) && (col8x8_remaining > 0));
// In-image SB64
if ((col8x8_remaining >= MI_BLOCK_SIZE) &&
(row8x8_remaining >= MI_BLOCK_SIZE)) {
int i, j;
int index;
diff d32[4];
const int offset = (mi_row >> 1) * cm->mb_cols + (mi_col >> 1);
int is_larger_better = 0;
int use32x32 = 0;
unsigned int thr = cpi->source_var_thresh;
vpx_memset(d32, 0, 4 * sizeof(diff));
for (i = 0; i < 4; i++) {
diff *d16[4];
for (j = 0; j < 4; j++) {
int b_mi_row = coord_lookup[i * 4 + j].row;
int b_mi_col = coord_lookup[i * 4 + j].col;
int boffset = b_mi_row / 2 * cm->mb_cols +
b_mi_col / 2;
d16[j] = cpi->source_diff_var + offset + boffset;
index = b_mi_row * mis + b_mi_col;
mi_8x8[index].src_mi = mi_upper_left + index;
mi_8x8[index].src_mi->mbmi.sb_type = BLOCK_16X16;
// TODO(yunqingwang): If d16[j].var is very large, use 8x8 partition
// size to further improve quality.
}
is_larger_better = (d16[0]->var < thr) && (d16[1]->var < thr) &&
(d16[2]->var < thr) && (d16[3]->var < thr);
// Use 32x32 partition
if (is_larger_better) {
use32x32 += 1;
for (j = 0; j < 4; j++) {
d32[i].sse += d16[j]->sse;
d32[i].sum += d16[j]->sum;
}
d32[i].var = d32[i].sse - (((int64_t)d32[i].sum * d32[i].sum) >> 10);
index = coord_lookup[i*4].row * mis + coord_lookup[i*4].col;
mi_8x8[index].src_mi = mi_upper_left + index;
mi_8x8[index].src_mi->mbmi.sb_type = BLOCK_32X32;
}
}
if (use32x32 == 4) {
thr <<= 1;
is_larger_better = (d32[0].var < thr) && (d32[1].var < thr) &&
(d32[2].var < thr) && (d32[3].var < thr);
// Use 64x64 partition
if (is_larger_better) {
mi_8x8[0].src_mi = mi_upper_left;
mi_8x8[0].src_mi->mbmi.sb_type = BLOCK_64X64;
}
}
} else { // partial in-image SB64
int bh = num_8x8_blocks_high_lookup[BLOCK_16X16];
int bw = num_8x8_blocks_wide_lookup[BLOCK_16X16];
set_partial_b64x64_partition(mi_upper_left, mis, bh, bw,
row8x8_remaining, col8x8_remaining, BLOCK_16X16, mi_8x8);
}
}
static void update_state_rt(VP9_COMP *cpi, ThreadData *td,
PICK_MODE_CONTEXT *ctx,
int mi_row, int mi_col, int bsize) {
VP9_COMMON *const cm = &cpi->common;
MACROBLOCK *const x = &td->mb;
MACROBLOCKD *const xd = &x->e_mbd;
MODE_INFO *const mi = xd->mi[0].src_mi;
MB_MODE_INFO *const mbmi = &xd->mi[0].src_mi->mbmi;
const struct segmentation *const seg = &cm->seg;
const int bw = num_8x8_blocks_wide_lookup[mi->mbmi.sb_type];
const int bh = num_8x8_blocks_high_lookup[mi->mbmi.sb_type];
const int x_mis = MIN(bw, cm->mi_cols - mi_col);
const int y_mis = MIN(bh, cm->mi_rows - mi_row);
MV_REF *const frame_mvs =
cm->cur_frame->mvs + mi_row * cm->mi_cols + mi_col;
int w, h;
*(xd->mi[0].src_mi) = ctx->mic;
xd->mi[0].src_mi = &xd->mi[0];
if (seg->enabled && cpi->oxcf.aq_mode) {
// For in frame complexity AQ or variance AQ, copy segment_id from
// segmentation_map.
if (cpi->oxcf.aq_mode == COMPLEXITY_AQ ||
cpi->oxcf.aq_mode == VARIANCE_AQ ) {
const uint8_t *const map = seg->update_map ? cpi->segmentation_map
: cm->last_frame_seg_map;
mbmi->segment_id = vp9_get_segment_id(cm, map, bsize, mi_row, mi_col);
} else {
// Setting segmentation map for cyclic_refresh
vp9_cyclic_refresh_update_segment(cpi, mbmi, mi_row, mi_col, bsize, 1,
ctx->rate);
}
vp9_init_plane_quantizers(cpi, x);
}
if (is_inter_block(mbmi)) {
vp9_update_mv_count(td);
if (cm->interp_filter == SWITCHABLE) {
const int pred_ctx = vp9_get_pred_context_switchable_interp(xd);
++td->counts->switchable_interp[pred_ctx][mbmi->interp_filter];
}
}
for (h = 0; h < y_mis; ++h) {
MV_REF *const frame_mv = frame_mvs + h * cm->mi_cols;
for (w = 0; w < x_mis; ++w) {
MV_REF *const mv = frame_mv + w;
mv->ref_frame[0] = mi->src_mi->mbmi.ref_frame[0];
mv->ref_frame[1] = mi->src_mi->mbmi.ref_frame[1];
mv->mv[0].as_int = mi->src_mi->mbmi.mv[0].as_int;
mv->mv[1].as_int = mi->src_mi->mbmi.mv[1].as_int;
}
}
x->skip = ctx->skip;
x->skip_txfm[0] = mbmi->segment_id ? 0 : ctx->skip_txfm[0];
}
static void encode_b_rt(VP9_COMP *cpi, ThreadData *td,
const TileInfo *const tile,
TOKENEXTRA **tp, int mi_row, int mi_col,
int output_enabled, BLOCK_SIZE bsize,
PICK_MODE_CONTEXT *ctx) {
MACROBLOCK *const x = &td->mb;
set_offsets(cpi, tile, x, mi_row, mi_col, bsize);
update_state_rt(cpi, td, ctx, mi_row, mi_col, bsize);
#if CONFIG_VP9_TEMPORAL_DENOISING
if (cpi->oxcf.noise_sensitivity > 0 && output_enabled) {
vp9_denoiser_denoise(&cpi->denoiser, x, mi_row, mi_col,
MAX(BLOCK_8X8, bsize), ctx);
}
#endif
encode_superblock(cpi, td, tp, output_enabled, mi_row, mi_col, bsize, ctx);
update_stats(&cpi->common, td);
(*tp)->token = EOSB_TOKEN;
(*tp)++;
}
static void encode_sb_rt(VP9_COMP *cpi, ThreadData *td,
const TileInfo *const tile,
TOKENEXTRA **tp, int mi_row, int mi_col,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
int output_enabled, BLOCK_SIZE bsize,
PC_TREE *pc_tree) {
VP9_COMMON *const cm = &cpi->common;
MACROBLOCK *const x = &td->mb;
MACROBLOCKD *const xd = &x->e_mbd;
const int bsl = b_width_log2_lookup[bsize], hbs = (1 << bsl) / 4;
int ctx;
PARTITION_TYPE partition;
BLOCK_SIZE subsize;
if (mi_row >= cm->mi_rows || mi_col >= cm->mi_cols)
return;
if (bsize >= BLOCK_8X8) {
const int idx_str = xd->mi_stride * mi_row + mi_col;
MODE_INFO *mi_8x8 = cm->mi[idx_str].src_mi;
ctx = partition_plane_context(xd, mi_row, mi_col, bsize);
subsize = mi_8x8[0].src_mi->mbmi.sb_type;
} else {
ctx = 0;
subsize = BLOCK_4X4;
}
partition = partition_lookup[bsl][subsize];
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
if (output_enabled && bsize != BLOCK_4X4)
td->counts->partition[ctx][partition]++;
switch (partition) {
case PARTITION_NONE:
encode_b_rt(cpi, td, tile, tp, mi_row, mi_col, output_enabled, subsize,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
&pc_tree->none);
break;
case PARTITION_VERT:
encode_b_rt(cpi, td, tile, tp, mi_row, mi_col, output_enabled, subsize,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
&pc_tree->vertical[0]);
if (mi_col + hbs < cm->mi_cols && bsize > BLOCK_8X8) {
encode_b_rt(cpi, td, tile, tp, mi_row, mi_col + hbs, output_enabled,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
subsize, &pc_tree->vertical[1]);
}
break;
case PARTITION_HORZ:
encode_b_rt(cpi, td, tile, tp, mi_row, mi_col, output_enabled, subsize,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
&pc_tree->horizontal[0]);
if (mi_row + hbs < cm->mi_rows && bsize > BLOCK_8X8) {
encode_b_rt(cpi, td, tile, tp, mi_row + hbs, mi_col, output_enabled,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
subsize, &pc_tree->horizontal[1]);
}
break;
case PARTITION_SPLIT:
subsize = get_subsize(bsize, PARTITION_SPLIT);
encode_sb_rt(cpi, td, tile, tp, mi_row, mi_col, output_enabled, subsize,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->split[0]);
encode_sb_rt(cpi, td, tile, tp, mi_row, mi_col + hbs, output_enabled,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
subsize, pc_tree->split[1]);
encode_sb_rt(cpi, td, tile, tp, mi_row + hbs, mi_col, output_enabled,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
subsize, pc_tree->split[2]);
encode_sb_rt(cpi, td, tile, tp, mi_row + hbs, mi_col + hbs,
output_enabled, subsize, pc_tree->split[3]);
break;
default:
assert(0 && "Invalid partition type.");
break;
}
if (partition != PARTITION_SPLIT || bsize == BLOCK_8X8)
update_partition_context(xd, mi_row, mi_col, subsize, bsize);
}
static void rd_use_partition(VP9_COMP *cpi,
ThreadData *td,
TileDataEnc *tile_data,
MODE_INFO *mi_8x8, TOKENEXTRA **tp,
int mi_row, int mi_col,
BLOCK_SIZE bsize,
int *rate, int64_t *dist,
int do_recon, PC_TREE *pc_tree) {
VP9_COMMON *const cm = &cpi->common;
TileInfo *const tile_info = &tile_data->tile_info;
MACROBLOCK *const x = &td->mb;
MACROBLOCKD *const xd = &x->e_mbd;
const int mis = cm->mi_stride;
const int bsl = b_width_log2_lookup[bsize];
const int mi_step = num_4x4_blocks_wide_lookup[bsize] / 2;
const int bss = (1 << bsl) / 4;
int i, pl;
PARTITION_TYPE partition = PARTITION_NONE;
BLOCK_SIZE subsize;
ENTROPY_CONTEXT l[16 * MAX_MB_PLANE], a[16 * MAX_MB_PLANE];
PARTITION_CONTEXT sl[8], sa[8];
RD_COST last_part_rdc, none_rdc, chosen_rdc;
BLOCK_SIZE sub_subsize = BLOCK_4X4;
int splits_below = 0;
BLOCK_SIZE bs_type = mi_8x8[0].src_mi->mbmi.sb_type;
int do_partition_search = 1;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
PICK_MODE_CONTEXT *ctx = &pc_tree->none;
if (mi_row >= cm->mi_rows || mi_col >= cm->mi_cols)
return;
assert(num_4x4_blocks_wide_lookup[bsize] ==
num_4x4_blocks_high_lookup[bsize]);
vp9_rd_cost_reset(&last_part_rdc);
vp9_rd_cost_reset(&none_rdc);
vp9_rd_cost_reset(&chosen_rdc);
partition = partition_lookup[bsl][bs_type];
subsize = get_subsize(bsize, partition);
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->partitioning = partition;
save_context(x, mi_row, mi_col, a, l, sa, sl, bsize);
if (bsize == BLOCK_16X16 && cpi->oxcf.aq_mode) {
set_offsets(cpi, tile_info, x, mi_row, mi_col, bsize);
x->mb_energy = vp9_block_energy(cpi, x, bsize);
}
if (do_partition_search &&
cpi->sf.partition_search_type == SEARCH_PARTITION &&
cpi->sf.adjust_partitioning_from_last_frame) {
// Check if any of the sub blocks are further split.
if (partition == PARTITION_SPLIT && subsize > BLOCK_8X8) {
sub_subsize = get_subsize(subsize, PARTITION_SPLIT);
splits_below = 1;
for (i = 0; i < 4; i++) {
int jj = i >> 1, ii = i & 0x01;
MODE_INFO *this_mi = mi_8x8[jj * bss * mis + ii * bss].src_mi;
if (this_mi && this_mi->mbmi.sb_type >= sub_subsize) {
splits_below = 0;
}
}
}
// If partition is not none try none unless each of the 4 splits are split
// even further..
if (partition != PARTITION_NONE && !splits_below &&
mi_row + (mi_step >> 1) < cm->mi_rows &&
mi_col + (mi_step >> 1) < cm->mi_cols) {
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->partitioning = PARTITION_NONE;
rd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col, &none_rdc, bsize,
ctx, INT64_MAX);
pl = partition_plane_context(xd, mi_row, mi_col, bsize);
if (none_rdc.rate < INT_MAX) {
none_rdc.rate += cpi->partition_cost[pl][PARTITION_NONE];
none_rdc.rdcost = RDCOST(x->rdmult, x->rddiv, none_rdc.rate,
none_rdc.dist);
}
restore_context(x, mi_row, mi_col, a, l, sa, sl, bsize);
mi_8x8[0].src_mi->mbmi.sb_type = bs_type;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->partitioning = partition;
}
}
switch (partition) {
case PARTITION_NONE:
rd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col, &last_part_rdc,
bsize, ctx, INT64_MAX);
break;
case PARTITION_HORZ:
rd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col, &last_part_rdc,
subsize, &pc_tree->horizontal[0],
INT64_MAX);
if (last_part_rdc.rate != INT_MAX &&
bsize >= BLOCK_8X8 && mi_row + (mi_step >> 1) < cm->mi_rows) {
RD_COST tmp_rdc;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
PICK_MODE_CONTEXT *ctx = &pc_tree->horizontal[0];
vp9_rd_cost_init(&tmp_rdc);
update_state(cpi, td, ctx, mi_row, mi_col, subsize, 0);
encode_superblock(cpi, td, tp, 0, mi_row, mi_col, subsize, ctx);
rd_pick_sb_modes(cpi, tile_data, x,
mi_row + (mi_step >> 1), mi_col, &tmp_rdc,
subsize, &pc_tree->horizontal[1], INT64_MAX);
if (tmp_rdc.rate == INT_MAX || tmp_rdc.dist == INT64_MAX) {
vp9_rd_cost_reset(&last_part_rdc);
break;
}
last_part_rdc.rate += tmp_rdc.rate;
last_part_rdc.dist += tmp_rdc.dist;
last_part_rdc.rdcost += tmp_rdc.rdcost;
}
break;
case PARTITION_VERT:
rd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col, &last_part_rdc,
subsize, &pc_tree->vertical[0], INT64_MAX);
if (last_part_rdc.rate != INT_MAX &&
bsize >= BLOCK_8X8 && mi_col + (mi_step >> 1) < cm->mi_cols) {
RD_COST tmp_rdc;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
PICK_MODE_CONTEXT *ctx = &pc_tree->vertical[0];
vp9_rd_cost_init(&tmp_rdc);
update_state(cpi, td, ctx, mi_row, mi_col, subsize, 0);
encode_superblock(cpi, td, tp, 0, mi_row, mi_col, subsize, ctx);
rd_pick_sb_modes(cpi, tile_data, x,
mi_row, mi_col + (mi_step >> 1), &tmp_rdc,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
subsize, &pc_tree->vertical[bsize > BLOCK_8X8],
INT64_MAX);
if (tmp_rdc.rate == INT_MAX || tmp_rdc.dist == INT64_MAX) {
vp9_rd_cost_reset(&last_part_rdc);
break;
}
last_part_rdc.rate += tmp_rdc.rate;
last_part_rdc.dist += tmp_rdc.dist;
last_part_rdc.rdcost += tmp_rdc.rdcost;
}
break;
case PARTITION_SPLIT:
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
if (bsize == BLOCK_8X8) {
rd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col, &last_part_rdc,
subsize, pc_tree->leaf_split[0], INT64_MAX);
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
break;
}
last_part_rdc.rate = 0;
last_part_rdc.dist = 0;
last_part_rdc.rdcost = 0;
for (i = 0; i < 4; i++) {
int x_idx = (i & 1) * (mi_step >> 1);
int y_idx = (i >> 1) * (mi_step >> 1);
int jj = i >> 1, ii = i & 0x01;
RD_COST tmp_rdc;
if ((mi_row + y_idx >= cm->mi_rows) || (mi_col + x_idx >= cm->mi_cols))
continue;
vp9_rd_cost_init(&tmp_rdc);
rd_use_partition(cpi, td, tile_data,
mi_8x8 + jj * bss * mis + ii * bss, tp,
mi_row + y_idx, mi_col + x_idx, subsize,
&tmp_rdc.rate, &tmp_rdc.dist,
i != 3, pc_tree->split[i]);
if (tmp_rdc.rate == INT_MAX || tmp_rdc.dist == INT64_MAX) {
vp9_rd_cost_reset(&last_part_rdc);
break;
}
last_part_rdc.rate += tmp_rdc.rate;
last_part_rdc.dist += tmp_rdc.dist;
}
break;
default:
assert(0);
break;
}
pl = partition_plane_context(xd, mi_row, mi_col, bsize);
if (last_part_rdc.rate < INT_MAX) {
last_part_rdc.rate += cpi->partition_cost[pl][partition];
last_part_rdc.rdcost = RDCOST(x->rdmult, x->rddiv,
last_part_rdc.rate, last_part_rdc.dist);
}
if (do_partition_search
&& cpi->sf.adjust_partitioning_from_last_frame
&& cpi->sf.partition_search_type == SEARCH_PARTITION
&& partition != PARTITION_SPLIT && bsize > BLOCK_8X8
&& (mi_row + mi_step < cm->mi_rows ||
mi_row + (mi_step >> 1) == cm->mi_rows)
&& (mi_col + mi_step < cm->mi_cols ||
mi_col + (mi_step >> 1) == cm->mi_cols)) {
BLOCK_SIZE split_subsize = get_subsize(bsize, PARTITION_SPLIT);
chosen_rdc.rate = 0;
chosen_rdc.dist = 0;
restore_context(x, mi_row, mi_col, a, l, sa, sl, bsize);
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->partitioning = PARTITION_SPLIT;
// Split partition.
for (i = 0; i < 4; i++) {
int x_idx = (i & 1) * (mi_step >> 1);
int y_idx = (i >> 1) * (mi_step >> 1);
RD_COST tmp_rdc;
ENTROPY_CONTEXT l[16 * MAX_MB_PLANE], a[16 * MAX_MB_PLANE];
PARTITION_CONTEXT sl[8], sa[8];
if ((mi_row + y_idx >= cm->mi_rows) || (mi_col + x_idx >= cm->mi_cols))
continue;
save_context(x, mi_row, mi_col, a, l, sa, sl, bsize);
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->split[i]->partitioning = PARTITION_NONE;
rd_pick_sb_modes(cpi, tile_data, x,
mi_row + y_idx, mi_col + x_idx, &tmp_rdc,
split_subsize, &pc_tree->split[i]->none, INT64_MAX);
restore_context(x, mi_row, mi_col, a, l, sa, sl, bsize);
if (tmp_rdc.rate == INT_MAX || tmp_rdc.dist == INT64_MAX) {
vp9_rd_cost_reset(&chosen_rdc);
break;
}
chosen_rdc.rate += tmp_rdc.rate;
chosen_rdc.dist += tmp_rdc.dist;
if (i != 3)
encode_sb(cpi, td, tile_info, tp, mi_row + y_idx, mi_col + x_idx, 0,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
split_subsize, pc_tree->split[i]);
pl = partition_plane_context(xd, mi_row + y_idx, mi_col + x_idx,
split_subsize);
chosen_rdc.rate += cpi->partition_cost[pl][PARTITION_NONE];
}
pl = partition_plane_context(xd, mi_row, mi_col, bsize);
if (chosen_rdc.rate < INT_MAX) {
chosen_rdc.rate += cpi->partition_cost[pl][PARTITION_SPLIT];
chosen_rdc.rdcost = RDCOST(x->rdmult, x->rddiv,
chosen_rdc.rate, chosen_rdc.dist);
}
}
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
// If last_part is better set the partitioning to that.
if (last_part_rdc.rdcost < chosen_rdc.rdcost) {
mi_8x8[0].src_mi->mbmi.sb_type = bsize;
if (bsize >= BLOCK_8X8)
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->partitioning = partition;
chosen_rdc = last_part_rdc;
}
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
// If none was better set the partitioning to that.
if (none_rdc.rdcost < chosen_rdc.rdcost) {
if (bsize >= BLOCK_8X8)
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->partitioning = PARTITION_NONE;
chosen_rdc = none_rdc;
}
restore_context(x, mi_row, mi_col, a, l, sa, sl, bsize);
// We must have chosen a partitioning and encoding or we'll fail later on.
// No other opportunities for success.
if (bsize == BLOCK_64X64)
assert(chosen_rdc.rate < INT_MAX && chosen_rdc.dist < INT64_MAX);
if (do_recon) {
int output_enabled = (bsize == BLOCK_64X64);
// Check the projected output rate for this SB against it's target
// and and if necessary apply a Q delta using segmentation to get
// closer to the target.
if ((cpi->oxcf.aq_mode == COMPLEXITY_AQ) && cm->seg.update_map) {
vp9_select_in_frame_q_segment(cpi, x, bsize, mi_row, mi_col,
output_enabled, chosen_rdc.rate);
}
encode_sb(cpi, td, tile_info, tp, mi_row, mi_col, output_enabled, bsize,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree);
}
*rate = chosen_rdc.rate;
*dist = chosen_rdc.dist;
}
static const BLOCK_SIZE min_partition_size[BLOCK_SIZES] = {
BLOCK_4X4, BLOCK_4X4, BLOCK_4X4,
BLOCK_4X4, BLOCK_4X4, BLOCK_4X4,
BLOCK_8X8, BLOCK_8X8, BLOCK_8X8,
BLOCK_16X16, BLOCK_16X16, BLOCK_16X16,
BLOCK_16X16
};
static const BLOCK_SIZE max_partition_size[BLOCK_SIZES] = {
BLOCK_8X8, BLOCK_16X16, BLOCK_16X16,
BLOCK_16X16, BLOCK_32X32, BLOCK_32X32,
BLOCK_32X32, BLOCK_64X64, BLOCK_64X64,
BLOCK_64X64, BLOCK_64X64, BLOCK_64X64,
BLOCK_64X64
};
// Look at all the mode_info entries for blocks that are part of this
// partition and find the min and max values for sb_type.
// At the moment this is designed to work on a 64x64 SB but could be
// adjusted to use a size parameter.
//
// The min and max are assumed to have been initialized prior to calling this
// function so repeat calls can accumulate a min and max of more than one sb64.
static void get_sb_partition_size_range(MACROBLOCKD *xd, MODE_INFO *mi_8x8,
BLOCK_SIZE *min_block_size,
BLOCK_SIZE *max_block_size,
int bs_hist[BLOCK_SIZES]) {
int sb_width_in_blocks = MI_BLOCK_SIZE;
int sb_height_in_blocks = MI_BLOCK_SIZE;
int i, j;
int index = 0;
// Check the sb_type for each block that belongs to this region.
for (i = 0; i < sb_height_in_blocks; ++i) {
for (j = 0; j < sb_width_in_blocks; ++j) {
MODE_INFO *mi = mi_8x8[index+j].src_mi;
BLOCK_SIZE sb_type = mi ? mi->mbmi.sb_type : 0;
bs_hist[sb_type]++;
*min_block_size = MIN(*min_block_size, sb_type);
*max_block_size = MAX(*max_block_size, sb_type);
}
index += xd->mi_stride;
}
}
// Next square block size less or equal than current block size.
static const BLOCK_SIZE next_square_size[BLOCK_SIZES] = {
BLOCK_4X4, BLOCK_4X4, BLOCK_4X4,
BLOCK_8X8, BLOCK_8X8, BLOCK_8X8,
BLOCK_16X16, BLOCK_16X16, BLOCK_16X16,
BLOCK_32X32, BLOCK_32X32, BLOCK_32X32,
BLOCK_64X64
};
// Look at neighboring blocks and set a min and max partition size based on
// what they chose.
static void rd_auto_partition_range(VP9_COMP *cpi, const TileInfo *const tile,
MACROBLOCKD *const xd,
int mi_row, int mi_col,
BLOCK_SIZE *min_block_size,
BLOCK_SIZE *max_block_size) {
VP9_COMMON *const cm = &cpi->common;
MODE_INFO *mi = xd->mi[0].src_mi;
const int left_in_image = xd->left_available && mi[-1].src_mi;
const int above_in_image = xd->up_available && mi[-xd->mi_stride].src_mi;
const int row8x8_remaining = tile->mi_row_end - mi_row;
const int col8x8_remaining = tile->mi_col_end - mi_col;
int bh, bw;
BLOCK_SIZE min_size = BLOCK_4X4;
BLOCK_SIZE max_size = BLOCK_64X64;
int i = 0;
int bs_hist[BLOCK_SIZES] = {0};
// Trap case where we do not have a prediction.
if (left_in_image || above_in_image || cm->frame_type != KEY_FRAME) {
// Default "min to max" and "max to min"
min_size = BLOCK_64X64;
max_size = BLOCK_4X4;
// NOTE: each call to get_sb_partition_size_range() uses the previous
// passed in values for min and max as a starting point.
// Find the min and max partition used in previous frame at this location
if (cm->frame_type != KEY_FRAME) {
MODE_INFO *prev_mi =
cm->prev_mip + cm->mi_stride + 1 + mi_row * xd->mi_stride + mi_col;
get_sb_partition_size_range(xd, prev_mi, &min_size, &max_size, bs_hist);
}
// Find the min and max partition sizes used in the left SB64
if (left_in_image) {
MODE_INFO *left_sb64_mi = mi[-MI_BLOCK_SIZE].src_mi;
get_sb_partition_size_range(xd, left_sb64_mi, &min_size, &max_size,
bs_hist);
}
// Find the min and max partition sizes used in the above SB64.
if (above_in_image) {
MODE_INFO *above_sb64_mi = mi[-xd->mi_stride * MI_BLOCK_SIZE].src_mi;
get_sb_partition_size_range(xd, above_sb64_mi, &min_size, &max_size,
bs_hist);
}
// adjust observed min and max
if (cpi->sf.auto_min_max_partition_size == RELAXED_NEIGHBORING_MIN_MAX) {
min_size = min_partition_size[min_size];
max_size = max_partition_size[max_size];
} else if (cpi->sf.auto_min_max_partition_size ==
CONSTRAIN_NEIGHBORING_MIN_MAX) {
// adjust the search range based on the histogram of the observed
// partition sizes from left, above the previous co-located blocks
int sum = 0;
int first_moment = 0;
int second_moment = 0;
int var_unnormalized = 0;
for (i = 0; i < BLOCK_SIZES; i++) {
sum += bs_hist[i];
first_moment += bs_hist[i] * i;
second_moment += bs_hist[i] * i * i;
}
// if variance is small enough,
// adjust the range around its mean size, which gives a tighter range
var_unnormalized = second_moment - first_moment * first_moment / sum;
if (var_unnormalized <= 4 * sum) {
int mean = first_moment / sum;
min_size = min_partition_size[mean];
max_size = max_partition_size[mean];
} else {
min_size = min_partition_size[min_size];
max_size = max_partition_size[max_size];
}
}
}
// Check border cases where max and min from neighbors may not be legal.
max_size = find_partition_size(max_size,
row8x8_remaining, col8x8_remaining,
&bh, &bw);
min_size = MIN(min_size, max_size);
// When use_square_partition_only is true, make sure at least one square
// partition is allowed by selecting the next smaller square size as
// *min_block_size.
if (cpi->sf.use_square_partition_only &&
next_square_size[max_size] < min_size) {
min_size = next_square_size[max_size];
}
*min_block_size = min_size;
*max_block_size = max_size;
}
static void auto_partition_range(VP9_COMP *cpi, const TileInfo *const tile,
MACROBLOCKD *const xd,
int mi_row, int mi_col,
BLOCK_SIZE *min_block_size,
BLOCK_SIZE *max_block_size) {
VP9_COMMON *const cm = &cpi->common;
MODE_INFO *mi_8x8 = xd->mi;
const int left_in_image = xd->left_available && mi_8x8[-1].src_mi;
const int above_in_image = xd->up_available &&
mi_8x8[-xd->mi_stride].src_mi;
int row8x8_remaining = tile->mi_row_end - mi_row;
int col8x8_remaining = tile->mi_col_end - mi_col;
int bh, bw;
BLOCK_SIZE min_size = BLOCK_32X32;
BLOCK_SIZE max_size = BLOCK_8X8;
int bsl = mi_width_log2_lookup[BLOCK_64X64];
const int search_range_ctrl = (((mi_row + mi_col) >> bsl) +
get_chessboard_index(cm->current_video_frame)) & 0x1;
// Trap case where we do not have a prediction.
if (search_range_ctrl &&
(left_in_image || above_in_image || cm->frame_type != KEY_FRAME)) {
int block;
MODE_INFO *mi;
BLOCK_SIZE sb_type;
// Find the min and max partition sizes used in the left SB64.
if (left_in_image) {
MODE_INFO *cur_mi;
mi = mi_8x8[-1].src_mi;
for (block = 0; block < MI_BLOCK_SIZE; ++block) {
cur_mi = mi[block * xd->mi_stride].src_mi;
sb_type = cur_mi ? cur_mi->mbmi.sb_type : 0;
min_size = MIN(min_size, sb_type);
max_size = MAX(max_size, sb_type);
}
}
// Find the min and max partition sizes used in the above SB64.
if (above_in_image) {
mi = mi_8x8[-xd->mi_stride * MI_BLOCK_SIZE].src_mi;
for (block = 0; block < MI_BLOCK_SIZE; ++block) {
sb_type = mi[block].src_mi ? mi[block].src_mi->mbmi.sb_type : 0;
min_size = MIN(min_size, sb_type);
max_size = MAX(max_size, sb_type);
}
}
min_size = min_partition_size[min_size];
max_size = find_partition_size(max_size, row8x8_remaining, col8x8_remaining,
&bh, &bw);
min_size = MIN(min_size, max_size);
min_size = MAX(min_size, BLOCK_8X8);
max_size = MIN(max_size, BLOCK_32X32);
} else {
min_size = BLOCK_8X8;
max_size = BLOCK_32X32;
}
*min_block_size = min_size;
*max_block_size = max_size;
}
// TODO(jingning) refactor functions setting partition search range
static void set_partition_range(VP9_COMMON *cm, MACROBLOCKD *xd,
int mi_row, int mi_col, BLOCK_SIZE bsize,
BLOCK_SIZE *min_bs, BLOCK_SIZE *max_bs) {
int mi_width = num_8x8_blocks_wide_lookup[bsize];
int mi_height = num_8x8_blocks_high_lookup[bsize];
int idx, idy;
MODE_INFO *mi;
const int idx_str = cm->mi_stride * mi_row + mi_col;
MODE_INFO *prev_mi = (cm->prev_mip + cm->mi_stride + 1 + idx_str)->src_mi;
BLOCK_SIZE bs, min_size, max_size;
min_size = BLOCK_64X64;
max_size = BLOCK_4X4;
if (prev_mi) {
for (idy = 0; idy < mi_height; ++idy) {
for (idx = 0; idx < mi_width; ++idx) {
mi = prev_mi[idy * cm->mi_stride + idx].src_mi;
bs = mi ? mi->mbmi.sb_type : bsize;
min_size = MIN(min_size, bs);
max_size = MAX(max_size, bs);
}
}
}
if (xd->left_available) {
for (idy = 0; idy < mi_height; ++idy) {
mi = xd->mi[idy * cm->mi_stride - 1].src_mi;
bs = mi ? mi->mbmi.sb_type : bsize;
min_size = MIN(min_size, bs);
max_size = MAX(max_size, bs);
}
}
if (xd->up_available) {
for (idx = 0; idx < mi_width; ++idx) {
mi = xd->mi[idx - cm->mi_stride].src_mi;
bs = mi ? mi->mbmi.sb_type : bsize;
min_size = MIN(min_size, bs);
max_size = MAX(max_size, bs);
}
}
if (min_size == max_size) {
min_size = min_partition_size[min_size];
max_size = max_partition_size[max_size];
}
*min_bs = min_size;
*max_bs = max_size;
}
static INLINE void store_pred_mv(MACROBLOCK *x, PICK_MODE_CONTEXT *ctx) {
vpx_memcpy(ctx->pred_mv, x->pred_mv, sizeof(x->pred_mv));
}
static INLINE void load_pred_mv(MACROBLOCK *x, PICK_MODE_CONTEXT *ctx) {
vpx_memcpy(x->pred_mv, ctx->pred_mv, sizeof(x->pred_mv));
}
#if CONFIG_FP_MB_STATS
const int num_16x16_blocks_wide_lookup[BLOCK_SIZES] =
{1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 4, 4};
const int num_16x16_blocks_high_lookup[BLOCK_SIZES] =
{1, 1, 1, 1, 1, 1, 1, 2, 1, 2, 4, 2, 4};
const int qindex_skip_threshold_lookup[BLOCK_SIZES] =
{0, 10, 10, 30, 40, 40, 60, 80, 80, 90, 100, 100, 120};
const int qindex_split_threshold_lookup[BLOCK_SIZES] =
{0, 3, 3, 7, 15, 15, 30, 40, 40, 60, 80, 80, 120};
const int complexity_16x16_blocks_threshold[BLOCK_SIZES] =
{1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 4, 4, 6};
typedef enum {
MV_ZERO = 0,
MV_LEFT = 1,
MV_UP = 2,
MV_RIGHT = 3,
MV_DOWN = 4,
MV_INVALID
} MOTION_DIRECTION;
static INLINE MOTION_DIRECTION get_motion_direction_fp(uint8_t fp_byte) {
if (fp_byte & FPMB_MOTION_ZERO_MASK) {
return MV_ZERO;
} else if (fp_byte & FPMB_MOTION_LEFT_MASK) {
return MV_LEFT;
} else if (fp_byte & FPMB_MOTION_RIGHT_MASK) {
return MV_RIGHT;
} else if (fp_byte & FPMB_MOTION_UP_MASK) {
return MV_UP;
} else {
return MV_DOWN;
}
}
static INLINE int get_motion_inconsistency(MOTION_DIRECTION this_mv,
MOTION_DIRECTION that_mv) {
if (this_mv == that_mv) {
return 0;
} else {
return abs(this_mv - that_mv) == 2 ? 2 : 1;
}
}
#endif
// TODO(jingning,jimbankoski,rbultje): properly skip partition types that are
// unlikely to be selected depending on previous rate-distortion optimization
// results, for encoding speed-up.
static void rd_pick_partition(VP9_COMP *cpi, ThreadData *td,
TileDataEnc *tile_data,
TOKENEXTRA **tp, int mi_row, int mi_col,
BLOCK_SIZE bsize, RD_COST *rd_cost,
int64_t best_rd, PC_TREE *pc_tree) {
VP9_COMMON *const cm = &cpi->common;
TileInfo *const tile_info = &tile_data->tile_info;
MACROBLOCK *const x = &td->mb;
MACROBLOCKD *const xd = &x->e_mbd;
const int mi_step = num_8x8_blocks_wide_lookup[bsize] / 2;
ENTROPY_CONTEXT l[16 * MAX_MB_PLANE], a[16 * MAX_MB_PLANE];
PARTITION_CONTEXT sl[8], sa[8];
TOKENEXTRA *tp_orig = *tp;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
PICK_MODE_CONTEXT *ctx = &pc_tree->none;
int i, pl;
BLOCK_SIZE subsize;
RD_COST this_rdc, sum_rdc, best_rdc;
int do_split = bsize >= BLOCK_8X8;
int do_rect = 1;
// Override skipping rectangular partition operations for edge blocks
const int force_horz_split = (mi_row + mi_step >= cm->mi_rows);
const int force_vert_split = (mi_col + mi_step >= cm->mi_cols);
const int xss = x->e_mbd.plane[1].subsampling_x;
const int yss = x->e_mbd.plane[1].subsampling_y;
BLOCK_SIZE min_size = x->min_partition_size;
BLOCK_SIZE max_size = x->max_partition_size;
#if CONFIG_FP_MB_STATS
unsigned int src_diff_var = UINT_MAX;
int none_complexity = 0;
#endif
int partition_none_allowed = !force_horz_split && !force_vert_split;
int partition_horz_allowed = !force_vert_split && yss <= xss &&
bsize >= BLOCK_8X8;
int partition_vert_allowed = !force_horz_split && xss <= yss &&
bsize >= BLOCK_8X8;
(void) *tp_orig;
assert(num_8x8_blocks_wide_lookup[bsize] ==
num_8x8_blocks_high_lookup[bsize]);
vp9_rd_cost_init(&this_rdc);
vp9_rd_cost_init(&sum_rdc);
vp9_rd_cost_reset(&best_rdc);
best_rdc.rdcost = best_rd;
set_offsets(cpi, tile_info, x, mi_row, mi_col, bsize);
if (bsize == BLOCK_16X16 && cpi->oxcf.aq_mode)
x->mb_energy = vp9_block_energy(cpi, x, bsize);
if (cpi->sf.cb_partition_search && bsize == BLOCK_16X16) {
int cb_partition_search_ctrl = ((pc_tree->index == 0 || pc_tree->index == 3)
+ get_chessboard_index(cm->current_video_frame)) & 0x1;
if (cb_partition_search_ctrl && bsize > min_size && bsize < max_size)
set_partition_range(cm, xd, mi_row, mi_col, bsize, &min_size, &max_size);
}
// Determine partition types in search according to the speed features.
// The threshold set here has to be of square block size.
if (cpi->sf.auto_min_max_partition_size) {
partition_none_allowed &= (bsize <= max_size && bsize >= min_size);
partition_horz_allowed &= ((bsize <= max_size && bsize > min_size) ||
force_horz_split);
partition_vert_allowed &= ((bsize <= max_size && bsize > min_size) ||
force_vert_split);
do_split &= bsize > min_size;
}
if (cpi->sf.use_square_partition_only) {
partition_horz_allowed &= force_horz_split;
partition_vert_allowed &= force_vert_split;
}
save_context(x, mi_row, mi_col, a, l, sa, sl, bsize);
#if CONFIG_FP_MB_STATS
if (cpi->use_fp_mb_stats) {
set_offsets(cpi, tile_info, x, mi_row, mi_col, bsize);
src_diff_var = get_sby_perpixel_diff_variance(cpi, &x->plane[0].src,
mi_row, mi_col, bsize);
}
#endif
#if CONFIG_FP_MB_STATS
// Decide whether we shall split directly and skip searching NONE by using
// the first pass block statistics
if (cpi->use_fp_mb_stats && bsize >= BLOCK_32X32 && do_split &&
partition_none_allowed && src_diff_var > 4 &&
cm->base_qindex < qindex_split_threshold_lookup[bsize]) {
int mb_row = mi_row >> 1;
int mb_col = mi_col >> 1;
int mb_row_end =
MIN(mb_row + num_16x16_blocks_high_lookup[bsize], cm->mb_rows);
int mb_col_end =
MIN(mb_col + num_16x16_blocks_wide_lookup[bsize], cm->mb_cols);
int r, c;
// compute a complexity measure, basically measure inconsistency of motion
// vectors obtained from the first pass in the current block
for (r = mb_row; r < mb_row_end ; r++) {
for (c = mb_col; c < mb_col_end; c++) {
const int mb_index = r * cm->mb_cols + c;
MOTION_DIRECTION this_mv;
MOTION_DIRECTION right_mv;
MOTION_DIRECTION bottom_mv;
this_mv =
get_motion_direction_fp(cpi->twopass.this_frame_mb_stats[mb_index]);
// to its right
if (c != mb_col_end - 1) {
right_mv = get_motion_direction_fp(
cpi->twopass.this_frame_mb_stats[mb_index + 1]);
none_complexity += get_motion_inconsistency(this_mv, right_mv);
}
// to its bottom
if (r != mb_row_end - 1) {
bottom_mv = get_motion_direction_fp(
cpi->twopass.this_frame_mb_stats[mb_index + cm->mb_cols]);
none_complexity += get_motion_inconsistency(this_mv, bottom_mv);
}
// do not count its left and top neighbors to avoid double counting
}
}
if (none_complexity > complexity_16x16_blocks_threshold[bsize]) {
partition_none_allowed = 0;
}
}
#endif
// PARTITION_NONE
if (partition_none_allowed) {
rd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col,
&this_rdc, bsize, ctx, best_rdc.rdcost);
if (this_rdc.rate != INT_MAX) {
if (bsize >= BLOCK_8X8) {
pl = partition_plane_context(xd, mi_row, mi_col, bsize);
this_rdc.rate += cpi->partition_cost[pl][PARTITION_NONE];
this_rdc.rdcost = RDCOST(x->rdmult, x->rddiv,
this_rdc.rate, this_rdc.dist);
}
if (this_rdc.rdcost < best_rdc.rdcost) {
2014-08-15 02:25:21 +02:00
int64_t dist_breakout_thr = cpi->sf.partition_search_breakout_dist_thr;
int rate_breakout_thr = cpi->sf.partition_search_breakout_rate_thr;
best_rdc = this_rdc;
if (bsize >= BLOCK_8X8)
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->partitioning = PARTITION_NONE;
2014-08-15 02:25:21 +02:00
// Adjust dist breakout threshold according to the partition size.
dist_breakout_thr >>= 8 - (b_width_log2_lookup[bsize] +
b_height_log2_lookup[bsize]);
rate_breakout_thr *= num_pels_log2_lookup[bsize];
2014-08-15 02:25:21 +02:00
// If all y, u, v transform blocks in this partition are skippable, and
// the dist & rate are within the thresholds, the partition search is
// terminated for current branch of the partition search tree.
// The dist & rate thresholds are set to 0 at speed 0 to disable the
// early termination at that speed.
if (!x->e_mbd.lossless &&
(ctx->skippable && best_rdc.dist < dist_breakout_thr &&
best_rdc.rate < rate_breakout_thr)) {
do_split = 0;
do_rect = 0;
}
#if CONFIG_FP_MB_STATS
// Check if every 16x16 first pass block statistics has zero
// motion and the corresponding first pass residue is small enough.
// If that is the case, check the difference variance between the
// current frame and the last frame. If the variance is small enough,
// stop further splitting in RD optimization
if (cpi->use_fp_mb_stats && do_split != 0 &&
cm->base_qindex > qindex_skip_threshold_lookup[bsize]) {
int mb_row = mi_row >> 1;
int mb_col = mi_col >> 1;
int mb_row_end =
MIN(mb_row + num_16x16_blocks_high_lookup[bsize], cm->mb_rows);
int mb_col_end =
MIN(mb_col + num_16x16_blocks_wide_lookup[bsize], cm->mb_cols);
int r, c;
int skip = 1;
for (r = mb_row; r < mb_row_end; r++) {
for (c = mb_col; c < mb_col_end; c++) {
const int mb_index = r * cm->mb_cols + c;
if (!(cpi->twopass.this_frame_mb_stats[mb_index] &
FPMB_MOTION_ZERO_MASK) ||
!(cpi->twopass.this_frame_mb_stats[mb_index] &
FPMB_ERROR_SMALL_MASK)) {
skip = 0;
break;
}
}
if (skip == 0) {
break;
}
}
if (skip) {
if (src_diff_var == UINT_MAX) {
set_offsets(cpi, tile_info, x, mi_row, mi_col, bsize);
src_diff_var = get_sby_perpixel_diff_variance(
cpi, &x->plane[0].src, mi_row, mi_col, bsize);
}
if (src_diff_var < 8) {
do_split = 0;
do_rect = 0;
}
}
}
#endif
}
}
restore_context(x, mi_row, mi_col, a, l, sa, sl, bsize);
}
// store estimated motion vector
if (cpi->sf.adaptive_motion_search)
store_pred_mv(x, ctx);
// PARTITION_SPLIT
// TODO(jingning): use the motion vectors given by the above search as
// the starting point of motion search in the following partition type check.
if (do_split) {
subsize = get_subsize(bsize, PARTITION_SPLIT);
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
if (bsize == BLOCK_8X8) {
i = 4;
if (cpi->sf.adaptive_pred_interp_filter && partition_none_allowed)
pc_tree->leaf_split[0]->pred_interp_filter =
ctx->mic.mbmi.interp_filter;
rd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col, &sum_rdc, subsize,
pc_tree->leaf_split[0], best_rdc.rdcost);
if (sum_rdc.rate == INT_MAX)
sum_rdc.rdcost = INT64_MAX;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
} else {
for (i = 0; i < 4 && sum_rdc.rdcost < best_rdc.rdcost; ++i) {
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
const int x_idx = (i & 1) * mi_step;
const int y_idx = (i >> 1) * mi_step;
if (mi_row + y_idx >= cm->mi_rows || mi_col + x_idx >= cm->mi_cols)
continue;
if (cpi->sf.adaptive_motion_search)
load_pred_mv(x, ctx);
pc_tree->split[i]->index = i;
rd_pick_partition(cpi, td, tile_data, tp,
mi_row + y_idx, mi_col + x_idx,
subsize, &this_rdc,
best_rdc.rdcost - sum_rdc.rdcost, pc_tree->split[i]);
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
if (this_rdc.rate == INT_MAX) {
sum_rdc.rdcost = INT64_MAX;
break;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
} else {
sum_rdc.rate += this_rdc.rate;
sum_rdc.dist += this_rdc.dist;
sum_rdc.rdcost += this_rdc.rdcost;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
}
}
}
if (sum_rdc.rdcost < best_rdc.rdcost && i == 4) {
pl = partition_plane_context(xd, mi_row, mi_col, bsize);
sum_rdc.rate += cpi->partition_cost[pl][PARTITION_SPLIT];
sum_rdc.rdcost = RDCOST(x->rdmult, x->rddiv,
sum_rdc.rate, sum_rdc.dist);
if (sum_rdc.rdcost < best_rdc.rdcost) {
best_rdc = sum_rdc;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->partitioning = PARTITION_SPLIT;
}
} else {
// skip rectangular partition test when larger block size
// gives better rd cost
if (cpi->sf.less_rectangular_check)
do_rect &= !partition_none_allowed;
}
restore_context(x, mi_row, mi_col, a, l, sa, sl, bsize);
}
// PARTITION_HORZ
if (partition_horz_allowed && do_rect) {
subsize = get_subsize(bsize, PARTITION_HORZ);
if (cpi->sf.adaptive_motion_search)
load_pred_mv(x, ctx);
if (cpi->sf.adaptive_pred_interp_filter && bsize == BLOCK_8X8 &&
partition_none_allowed)
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->horizontal[0].pred_interp_filter =
ctx->mic.mbmi.interp_filter;
rd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col, &sum_rdc, subsize,
&pc_tree->horizontal[0], best_rdc.rdcost);
if (sum_rdc.rdcost < best_rdc.rdcost && mi_row + mi_step < cm->mi_rows &&
bsize > BLOCK_8X8) {
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
PICK_MODE_CONTEXT *ctx = &pc_tree->horizontal[0];
update_state(cpi, td, ctx, mi_row, mi_col, subsize, 0);
encode_superblock(cpi, td, tp, 0, mi_row, mi_col, subsize, ctx);
if (cpi->sf.adaptive_motion_search)
load_pred_mv(x, ctx);
if (cpi->sf.adaptive_pred_interp_filter && bsize == BLOCK_8X8 &&
partition_none_allowed)
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->horizontal[1].pred_interp_filter =
ctx->mic.mbmi.interp_filter;
rd_pick_sb_modes(cpi, tile_data, x, mi_row + mi_step, mi_col,
&this_rdc, subsize, &pc_tree->horizontal[1],
best_rdc.rdcost - sum_rdc.rdcost);
if (this_rdc.rate == INT_MAX) {
sum_rdc.rdcost = INT64_MAX;
} else {
sum_rdc.rate += this_rdc.rate;
sum_rdc.dist += this_rdc.dist;
sum_rdc.rdcost += this_rdc.rdcost;
}
}
if (sum_rdc.rdcost < best_rdc.rdcost) {
pl = partition_plane_context(xd, mi_row, mi_col, bsize);
sum_rdc.rate += cpi->partition_cost[pl][PARTITION_HORZ];
sum_rdc.rdcost = RDCOST(x->rdmult, x->rddiv, sum_rdc.rate, sum_rdc.dist);
if (sum_rdc.rdcost < best_rdc.rdcost) {
best_rdc = sum_rdc;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->partitioning = PARTITION_HORZ;
}
}
restore_context(x, mi_row, mi_col, a, l, sa, sl, bsize);
}
// PARTITION_VERT
if (partition_vert_allowed && do_rect) {
subsize = get_subsize(bsize, PARTITION_VERT);
if (cpi->sf.adaptive_motion_search)
load_pred_mv(x, ctx);
if (cpi->sf.adaptive_pred_interp_filter && bsize == BLOCK_8X8 &&
partition_none_allowed)
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->vertical[0].pred_interp_filter =
ctx->mic.mbmi.interp_filter;
rd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col, &sum_rdc, subsize,
&pc_tree->vertical[0], best_rdc.rdcost);
if (sum_rdc.rdcost < best_rdc.rdcost && mi_col + mi_step < cm->mi_cols &&
bsize > BLOCK_8X8) {
update_state(cpi, td, &pc_tree->vertical[0], mi_row, mi_col, subsize, 0);
encode_superblock(cpi, td, tp, 0, mi_row, mi_col, subsize,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
&pc_tree->vertical[0]);
if (cpi->sf.adaptive_motion_search)
load_pred_mv(x, ctx);
if (cpi->sf.adaptive_pred_interp_filter && bsize == BLOCK_8X8 &&
partition_none_allowed)
pc_tree->vertical[1].pred_interp_filter =
ctx->mic.mbmi.interp_filter;
rd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col + mi_step,
&this_rdc, subsize,
&pc_tree->vertical[1], best_rdc.rdcost - sum_rdc.rdcost);
if (this_rdc.rate == INT_MAX) {
sum_rdc.rdcost = INT64_MAX;
} else {
sum_rdc.rate += this_rdc.rate;
sum_rdc.dist += this_rdc.dist;
sum_rdc.rdcost += this_rdc.rdcost;
}
}
if (sum_rdc.rdcost < best_rdc.rdcost) {
pl = partition_plane_context(xd, mi_row, mi_col, bsize);
sum_rdc.rate += cpi->partition_cost[pl][PARTITION_VERT];
sum_rdc.rdcost = RDCOST(x->rdmult, x->rddiv,
sum_rdc.rate, sum_rdc.dist);
if (sum_rdc.rdcost < best_rdc.rdcost) {
best_rdc = sum_rdc;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->partitioning = PARTITION_VERT;
}
}
restore_context(x, mi_row, mi_col, a, l, sa, sl, bsize);
}
// TODO(jbb): This code added so that we avoid static analysis
// warning related to the fact that best_rd isn't used after this
// point. This code should be refactored so that the duplicate
// checks occur in some sub function and thus are used...
(void) best_rd;
*rd_cost = best_rdc;
if (best_rdc.rate < INT_MAX && best_rdc.dist < INT64_MAX &&
pc_tree->index != 3) {
int output_enabled = (bsize == BLOCK_64X64);
// Check the projected output rate for this SB against it's target
// and and if necessary apply a Q delta using segmentation to get
// closer to the target.
if ((cpi->oxcf.aq_mode == COMPLEXITY_AQ) && cm->seg.update_map)
vp9_select_in_frame_q_segment(cpi, x, bsize, mi_row, mi_col,
output_enabled, best_rdc.rate);
encode_sb(cpi, td, tile_info, tp, mi_row, mi_col, output_enabled,
bsize, pc_tree);
}
if (bsize == BLOCK_64X64) {
assert(tp_orig < *tp);
assert(best_rdc.rate < INT_MAX);
assert(best_rdc.dist < INT64_MAX);
} else {
assert(tp_orig == *tp);
}
}
static void encode_rd_sb_row(VP9_COMP *cpi,
ThreadData *td,
TileDataEnc *tile_data,
int mi_row,
TOKENEXTRA **tp) {
VP9_COMMON *const cm = &cpi->common;
TileInfo *const tile_info = &tile_data->tile_info;
MACROBLOCK *const x = &td->mb;
MACROBLOCKD *const xd = &x->e_mbd;
SPEED_FEATURES *const sf = &cpi->sf;
int mi_col;
// Initialize the left context for the new SB row
vpx_memset(&xd->left_context, 0, sizeof(xd->left_context));
vpx_memset(xd->left_seg_context, 0, sizeof(xd->left_seg_context));
// Code each SB in the row
for (mi_col = tile_info->mi_col_start; mi_col < tile_info->mi_col_end;
mi_col += MI_BLOCK_SIZE) {
int dummy_rate;
int64_t dummy_dist;
RD_COST dummy_rdc;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
int i;
const int idx_str = cm->mi_stride * mi_row + mi_col;
MODE_INFO *mi = cm->mi + idx_str;
if (sf->adaptive_pred_interp_filter) {
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
for (i = 0; i < 64; ++i)
td->leaf_tree[i].pred_interp_filter = SWITCHABLE;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
for (i = 0; i < 64; ++i) {
td->pc_tree[i].vertical[0].pred_interp_filter = SWITCHABLE;
td->pc_tree[i].vertical[1].pred_interp_filter = SWITCHABLE;
td->pc_tree[i].horizontal[0].pred_interp_filter = SWITCHABLE;
td->pc_tree[i].horizontal[1].pred_interp_filter = SWITCHABLE;
}
}
vp9_zero(x->pred_mv);
td->pc_root->index = 0;
x->source_variance = UINT_MAX;
if (sf->partition_search_type == FIXED_PARTITION) {
set_offsets(cpi, tile_info, x, mi_row, mi_col, BLOCK_64X64);
set_fixed_partitioning(cpi, tile_info, mi, mi_row, mi_col,
sf->always_this_block_size);
rd_use_partition(cpi, td, tile_data, mi, tp, mi_row, mi_col,
BLOCK_64X64, &dummy_rate, &dummy_dist, 1, td->pc_root);
} else if (cpi->partition_search_skippable_frame) {
BLOCK_SIZE bsize;
set_offsets(cpi, tile_info, x, mi_row, mi_col, BLOCK_64X64);
bsize = get_rd_var_based_fixed_partition(cpi, x, mi_row, mi_col);
set_fixed_partitioning(cpi, tile_info, mi, mi_row, mi_col, bsize);
rd_use_partition(cpi, td, tile_data, mi, tp, mi_row, mi_col,
BLOCK_64X64, &dummy_rate, &dummy_dist, 1, td->pc_root);
} else if (sf->partition_search_type == VAR_BASED_PARTITION &&
cm->frame_type != KEY_FRAME) {
choose_partitioning(cpi, tile_info, x, mi_row, mi_col);
rd_use_partition(cpi, td, tile_data, mi, tp, mi_row, mi_col,
BLOCK_64X64, &dummy_rate, &dummy_dist, 1, td->pc_root);
} else {
// If required set upper and lower partition size limits
if (sf->auto_min_max_partition_size) {
set_offsets(cpi, tile_info, x, mi_row, mi_col, BLOCK_64X64);
rd_auto_partition_range(cpi, tile_info, xd, mi_row, mi_col,
&x->min_partition_size,
&x->max_partition_size);
}
rd_pick_partition(cpi, td, tile_data, tp, mi_row, mi_col, BLOCK_64X64,
&dummy_rdc, INT64_MAX, td->pc_root);
}
}
}
static void init_encode_frame_mb_context(VP9_COMP *cpi) {
MACROBLOCK *const x = &cpi->td.mb;
VP9_COMMON *const cm = &cpi->common;
MACROBLOCKD *const xd = &x->e_mbd;
const int aligned_mi_cols = mi_cols_aligned_to_sb(cm->mi_cols);
// Copy data over into macro block data structures.
vp9_setup_src_planes(x, cpi->Source, 0, 0);
vp9_setup_block_planes(&x->e_mbd, cm->subsampling_x, cm->subsampling_y);
// Note: this memset assumes above_context[0], [1] and [2]
// are allocated as part of the same buffer.
vpx_memset(xd->above_context[0], 0,
sizeof(*xd->above_context[0]) *
2 * aligned_mi_cols * MAX_MB_PLANE);
vpx_memset(xd->above_seg_context, 0,
sizeof(*xd->above_seg_context) * aligned_mi_cols);
}
static int check_dual_ref_flags(VP9_COMP *cpi) {
const int ref_flags = cpi->ref_frame_flags;
if (vp9_segfeature_active(&cpi->common.seg, 1, SEG_LVL_REF_FRAME)) {
return 0;
} else {
return (!!(ref_flags & VP9_GOLD_FLAG) + !!(ref_flags & VP9_LAST_FLAG)
+ !!(ref_flags & VP9_ALT_FLAG)) >= 2;
}
}
static void reset_skip_tx_size(VP9_COMMON *cm, TX_SIZE max_tx_size) {
int mi_row, mi_col;
const int mis = cm->mi_stride;
MODE_INFO *mi_ptr = cm->mi;
for (mi_row = 0; mi_row < cm->mi_rows; ++mi_row, mi_ptr += mis) {
for (mi_col = 0; mi_col < cm->mi_cols; ++mi_col) {
if (mi_ptr[mi_col].src_mi->mbmi.tx_size > max_tx_size)
mi_ptr[mi_col].src_mi->mbmi.tx_size = max_tx_size;
}
}
}
static MV_REFERENCE_FRAME get_frame_type(const VP9_COMP *cpi) {
if (frame_is_intra_only(&cpi->common))
return INTRA_FRAME;
else if (cpi->rc.is_src_frame_alt_ref && cpi->refresh_golden_frame)
return ALTREF_FRAME;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
else if (cpi->refresh_golden_frame || cpi->refresh_alt_ref_frame)
return GOLDEN_FRAME;
else
return LAST_FRAME;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
}
static TX_MODE select_tx_mode(const VP9_COMP *cpi, MACROBLOCKD *const xd) {
if (xd->lossless)
return ONLY_4X4;
if (cpi->sf.tx_size_search_method == USE_LARGESTALL)
return ALLOW_32X32;
else if (cpi->sf.tx_size_search_method == USE_FULL_RD||
cpi->sf.tx_size_search_method == USE_TX_8X8)
return TX_MODE_SELECT;
else
return cpi->common.tx_mode;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
}
static void hybrid_intra_mode_search(VP9_COMP *cpi, MACROBLOCK *const x,
RD_COST *rd_cost, BLOCK_SIZE bsize,
PICK_MODE_CONTEXT *ctx) {
if (bsize < BLOCK_16X16)
vp9_rd_pick_intra_mode_sb(cpi, x, rd_cost, bsize, ctx, INT64_MAX);
else
vp9_pick_intra_mode(cpi, x, rd_cost, bsize, ctx);
}
static void nonrd_pick_sb_modes(VP9_COMP *cpi,
TileDataEnc *tile_data, MACROBLOCK *const x,
int mi_row, int mi_col, RD_COST *rd_cost,
BLOCK_SIZE bsize, PICK_MODE_CONTEXT *ctx) {
VP9_COMMON *const cm = &cpi->common;
TileInfo *const tile_info = &tile_data->tile_info;
MACROBLOCKD *const xd = &x->e_mbd;
MB_MODE_INFO *mbmi;
set_offsets(cpi, tile_info, x, mi_row, mi_col, bsize);
mbmi = &xd->mi[0].src_mi->mbmi;
mbmi->sb_type = bsize;
if (cpi->oxcf.aq_mode == CYCLIC_REFRESH_AQ && cm->seg.enabled)
if (mbmi->segment_id)
x->rdmult = vp9_cyclic_refresh_get_rdmult(cpi->cyclic_refresh);
if (cm->frame_type == KEY_FRAME)
hybrid_intra_mode_search(cpi, x, rd_cost, bsize, ctx);
else if (vp9_segfeature_active(&cm->seg, mbmi->segment_id, SEG_LVL_SKIP))
set_mode_info_seg_skip(x, cm->tx_mode, rd_cost, bsize);
else
vp9_pick_inter_mode(cpi, x, tile_data, mi_row, mi_col,
rd_cost, bsize, ctx);
duplicate_mode_info_in_sb(cm, xd, mi_row, mi_col, bsize);
if (rd_cost->rate == INT_MAX)
vp9_rd_cost_reset(rd_cost);
ctx->rate = rd_cost->rate;
ctx->dist = rd_cost->dist;
}
static void fill_mode_info_sb(VP9_COMMON *cm, MACROBLOCK *x,
int mi_row, int mi_col,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
BLOCK_SIZE bsize, BLOCK_SIZE subsize,
PC_TREE *pc_tree) {
MACROBLOCKD *xd = &x->e_mbd;
int bsl = b_width_log2_lookup[bsize], hbs = (1 << bsl) / 4;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
PARTITION_TYPE partition = pc_tree->partitioning;
assert(bsize >= BLOCK_8X8);
if (mi_row >= cm->mi_rows || mi_col >= cm->mi_cols)
return;
switch (partition) {
case PARTITION_NONE:
set_modeinfo_offsets(cm, xd, mi_row, mi_col);
*(xd->mi[0].src_mi) = pc_tree->none.mic;
duplicate_mode_info_in_sb(cm, xd, mi_row, mi_col, bsize);
break;
case PARTITION_VERT:
set_modeinfo_offsets(cm, xd, mi_row, mi_col);
*(xd->mi[0].src_mi) = pc_tree->vertical[0].mic;
duplicate_mode_info_in_sb(cm, xd, mi_row, mi_col, bsize);
if (mi_col + hbs < cm->mi_cols) {
set_modeinfo_offsets(cm, xd, mi_row, mi_col + hbs);
*(xd->mi[0].src_mi) = pc_tree->vertical[1].mic;
duplicate_mode_info_in_sb(cm, xd, mi_row, mi_col + hbs, bsize);
}
break;
case PARTITION_HORZ:
set_modeinfo_offsets(cm, xd, mi_row, mi_col);
*(xd->mi[0].src_mi) = pc_tree->horizontal[0].mic;
duplicate_mode_info_in_sb(cm, xd, mi_row, mi_col, bsize);
if (mi_row + hbs < cm->mi_rows) {
set_modeinfo_offsets(cm, xd, mi_row + hbs, mi_col);
*(xd->mi[0].src_mi) = pc_tree->horizontal[1].mic;
duplicate_mode_info_in_sb(cm, xd, mi_row + hbs, mi_col, bsize);
}
break;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
case PARTITION_SPLIT: {
BLOCK_SIZE subsubsize = get_subsize(subsize, PARTITION_SPLIT);
fill_mode_info_sb(cm, x, mi_row, mi_col, subsize,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
subsubsize, pc_tree->split[0]);
fill_mode_info_sb(cm, x, mi_row, mi_col + hbs, subsize,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
subsubsize, pc_tree->split[1]);
fill_mode_info_sb(cm, x, mi_row + hbs, mi_col, subsize,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
subsubsize, pc_tree->split[2]);
fill_mode_info_sb(cm, x, mi_row + hbs, mi_col + hbs, subsize,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
subsubsize, pc_tree->split[3]);
break;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
}
default:
break;
}
}
// Reset the prediction pixel ready flag recursively.
static void pred_pixel_ready_reset(PC_TREE *pc_tree, BLOCK_SIZE bsize) {
pc_tree->none.pred_pixel_ready = 0;
pc_tree->horizontal[0].pred_pixel_ready = 0;
pc_tree->horizontal[1].pred_pixel_ready = 0;
pc_tree->vertical[0].pred_pixel_ready = 0;
pc_tree->vertical[1].pred_pixel_ready = 0;
if (bsize > BLOCK_8X8) {
BLOCK_SIZE subsize = get_subsize(bsize, PARTITION_SPLIT);
int i;
for (i = 0; i < 4; ++i)
pred_pixel_ready_reset(pc_tree->split[i], subsize);
}
}
static void nonrd_pick_partition(VP9_COMP *cpi, ThreadData *td,
TileDataEnc *tile_data,
TOKENEXTRA **tp, int mi_row,
int mi_col, BLOCK_SIZE bsize, RD_COST *rd_cost,
int do_recon, int64_t best_rd,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
PC_TREE *pc_tree) {
const SPEED_FEATURES *const sf = &cpi->sf;
const VP9EncoderConfig *const oxcf = &cpi->oxcf;
VP9_COMMON *const cm = &cpi->common;
TileInfo *const tile_info = &tile_data->tile_info;
MACROBLOCK *const x = &td->mb;
MACROBLOCKD *const xd = &x->e_mbd;
const int ms = num_8x8_blocks_wide_lookup[bsize] / 2;
TOKENEXTRA *tp_orig = *tp;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
PICK_MODE_CONTEXT *ctx = &pc_tree->none;
int i;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
BLOCK_SIZE subsize = bsize;
RD_COST this_rdc, sum_rdc, best_rdc;
int do_split = bsize >= BLOCK_8X8;
int do_rect = 1;
// Override skipping rectangular partition operations for edge blocks
const int force_horz_split = (mi_row + ms >= cm->mi_rows);
const int force_vert_split = (mi_col + ms >= cm->mi_cols);
const int xss = x->e_mbd.plane[1].subsampling_x;
const int yss = x->e_mbd.plane[1].subsampling_y;
int partition_none_allowed = !force_horz_split && !force_vert_split;
int partition_horz_allowed = !force_vert_split && yss <= xss &&
bsize >= BLOCK_8X8;
int partition_vert_allowed = !force_horz_split && xss <= yss &&
bsize >= BLOCK_8X8;
(void) *tp_orig;
assert(num_8x8_blocks_wide_lookup[bsize] ==
num_8x8_blocks_high_lookup[bsize]);
vp9_rd_cost_init(&sum_rdc);
vp9_rd_cost_reset(&best_rdc);
best_rdc.rdcost = best_rd;
// Determine partition types in search according to the speed features.
// The threshold set here has to be of square block size.
if (sf->auto_min_max_partition_size) {
partition_none_allowed &= (bsize <= x->max_partition_size &&
bsize >= x->min_partition_size);
partition_horz_allowed &= ((bsize <= x->max_partition_size &&
bsize > x->min_partition_size) ||
force_horz_split);
partition_vert_allowed &= ((bsize <= x->max_partition_size &&
bsize > x->min_partition_size) ||
force_vert_split);
do_split &= bsize > x->min_partition_size;
}
if (sf->use_square_partition_only) {
partition_horz_allowed &= force_horz_split;
partition_vert_allowed &= force_vert_split;
}
ctx->pred_pixel_ready = !(partition_vert_allowed ||
partition_horz_allowed ||
do_split);
// PARTITION_NONE
if (partition_none_allowed) {
nonrd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col,
&this_rdc, bsize, ctx);
ctx->mic.mbmi = xd->mi[0].src_mi->mbmi;
ctx->skip_txfm[0] = x->skip_txfm[0];
ctx->skip = x->skip;
if (this_rdc.rate != INT_MAX) {
int pl = partition_plane_context(xd, mi_row, mi_col, bsize);
this_rdc.rate += cpi->partition_cost[pl][PARTITION_NONE];
this_rdc.rdcost = RDCOST(x->rdmult, x->rddiv,
this_rdc.rate, this_rdc.dist);
if (this_rdc.rdcost < best_rdc.rdcost) {
int64_t dist_breakout_thr = sf->partition_search_breakout_dist_thr;
int64_t rate_breakout_thr = sf->partition_search_breakout_rate_thr;
dist_breakout_thr >>= 8 - (b_width_log2_lookup[bsize] +
b_height_log2_lookup[bsize]);
rate_breakout_thr *= num_pels_log2_lookup[bsize];
best_rdc = this_rdc;
if (bsize >= BLOCK_8X8)
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->partitioning = PARTITION_NONE;
if (!x->e_mbd.lossless &&
this_rdc.rate < rate_breakout_thr &&
this_rdc.dist < dist_breakout_thr) {
do_split = 0;
do_rect = 0;
}
}
}
}
// store estimated motion vector
store_pred_mv(x, ctx);
// PARTITION_SPLIT
if (do_split) {
int pl = partition_plane_context(xd, mi_row, mi_col, bsize);
sum_rdc.rate += cpi->partition_cost[pl][PARTITION_SPLIT];
sum_rdc.rdcost = RDCOST(x->rdmult, x->rddiv, sum_rdc.rate, sum_rdc.dist);
subsize = get_subsize(bsize, PARTITION_SPLIT);
for (i = 0; i < 4 && sum_rdc.rdcost < best_rdc.rdcost; ++i) {
const int x_idx = (i & 1) * ms;
const int y_idx = (i >> 1) * ms;
if (mi_row + y_idx >= cm->mi_rows || mi_col + x_idx >= cm->mi_cols)
continue;
load_pred_mv(x, ctx);
nonrd_pick_partition(cpi, td, tile_data, tp,
mi_row + y_idx, mi_col + x_idx,
subsize, &this_rdc, 0,
best_rdc.rdcost - sum_rdc.rdcost, pc_tree->split[i]);
if (this_rdc.rate == INT_MAX) {
vp9_rd_cost_reset(&sum_rdc);
} else {
sum_rdc.rate += this_rdc.rate;
sum_rdc.dist += this_rdc.dist;
sum_rdc.rdcost += this_rdc.rdcost;
}
}
if (sum_rdc.rdcost < best_rdc.rdcost) {
best_rdc = sum_rdc;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->partitioning = PARTITION_SPLIT;
} else {
// skip rectangular partition test when larger block size
// gives better rd cost
if (sf->less_rectangular_check)
do_rect &= !partition_none_allowed;
}
}
// PARTITION_HORZ
if (partition_horz_allowed && do_rect) {
subsize = get_subsize(bsize, PARTITION_HORZ);
if (sf->adaptive_motion_search)
load_pred_mv(x, ctx);
pc_tree->horizontal[0].pred_pixel_ready = 1;
nonrd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col, &sum_rdc, subsize,
&pc_tree->horizontal[0]);
pc_tree->horizontal[0].mic.mbmi = xd->mi[0].src_mi->mbmi;
pc_tree->horizontal[0].skip_txfm[0] = x->skip_txfm[0];
pc_tree->horizontal[0].skip = x->skip;
if (sum_rdc.rdcost < best_rdc.rdcost && mi_row + ms < cm->mi_rows) {
load_pred_mv(x, ctx);
pc_tree->horizontal[1].pred_pixel_ready = 1;
nonrd_pick_sb_modes(cpi, tile_data, x, mi_row + ms, mi_col,
&this_rdc, subsize,
&pc_tree->horizontal[1]);
pc_tree->horizontal[1].mic.mbmi = xd->mi[0].src_mi->mbmi;
pc_tree->horizontal[1].skip_txfm[0] = x->skip_txfm[0];
pc_tree->horizontal[1].skip = x->skip;
if (this_rdc.rate == INT_MAX) {
vp9_rd_cost_reset(&sum_rdc);
} else {
int pl = partition_plane_context(xd, mi_row, mi_col, bsize);
this_rdc.rate += cpi->partition_cost[pl][PARTITION_HORZ];
sum_rdc.rate += this_rdc.rate;
sum_rdc.dist += this_rdc.dist;
sum_rdc.rdcost = RDCOST(x->rdmult, x->rddiv,
sum_rdc.rate, sum_rdc.dist);
}
}
if (sum_rdc.rdcost < best_rdc.rdcost) {
best_rdc = sum_rdc;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->partitioning = PARTITION_HORZ;
} else {
pred_pixel_ready_reset(pc_tree, bsize);
}
}
// PARTITION_VERT
if (partition_vert_allowed && do_rect) {
subsize = get_subsize(bsize, PARTITION_VERT);
if (sf->adaptive_motion_search)
load_pred_mv(x, ctx);
pc_tree->vertical[0].pred_pixel_ready = 1;
nonrd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col, &sum_rdc, subsize,
&pc_tree->vertical[0]);
pc_tree->vertical[0].mic.mbmi = xd->mi[0].src_mi->mbmi;
pc_tree->vertical[0].skip_txfm[0] = x->skip_txfm[0];
pc_tree->vertical[0].skip = x->skip;
if (sum_rdc.rdcost < best_rdc.rdcost && mi_col + ms < cm->mi_cols) {
load_pred_mv(x, ctx);
pc_tree->vertical[1].pred_pixel_ready = 1;
nonrd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col + ms,
&this_rdc, subsize,
&pc_tree->vertical[1]);
pc_tree->vertical[1].mic.mbmi = xd->mi[0].src_mi->mbmi;
pc_tree->vertical[1].skip_txfm[0] = x->skip_txfm[0];
pc_tree->vertical[1].skip = x->skip;
if (this_rdc.rate == INT_MAX) {
vp9_rd_cost_reset(&sum_rdc);
} else {
int pl = partition_plane_context(xd, mi_row, mi_col, bsize);
sum_rdc.rate += cpi->partition_cost[pl][PARTITION_VERT];
sum_rdc.rate += this_rdc.rate;
sum_rdc.dist += this_rdc.dist;
sum_rdc.rdcost = RDCOST(x->rdmult, x->rddiv,
sum_rdc.rate, sum_rdc.dist);
}
}
if (sum_rdc.rdcost < best_rdc.rdcost) {
best_rdc = sum_rdc;
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->partitioning = PARTITION_VERT;
} else {
pred_pixel_ready_reset(pc_tree, bsize);
}
}
*rd_cost = best_rdc;
if (best_rdc.rate == INT_MAX) {
vp9_rd_cost_reset(rd_cost);
return;
}
// update mode info array
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
subsize = get_subsize(bsize, pc_tree->partitioning);
fill_mode_info_sb(cm, x, mi_row, mi_col, bsize, subsize,
pc_tree);
if (best_rdc.rate < INT_MAX && best_rdc.dist < INT64_MAX && do_recon) {
int output_enabled = (bsize == BLOCK_64X64);
// Check the projected output rate for this SB against it's target
// and and if necessary apply a Q delta using segmentation to get
// closer to the target.
if ((oxcf->aq_mode == COMPLEXITY_AQ) && cm->seg.update_map) {
vp9_select_in_frame_q_segment(cpi, x, bsize, mi_row, mi_col,
output_enabled, best_rdc.rate);
}
encode_sb_rt(cpi, td, tile_info, tp, mi_row, mi_col, output_enabled,
bsize, pc_tree);
}
if (bsize == BLOCK_64X64) {
assert(tp_orig < *tp);
assert(best_rdc.rate < INT_MAX);
assert(best_rdc.dist < INT64_MAX);
} else {
assert(tp_orig == *tp);
}
}
static void nonrd_select_partition(VP9_COMP *cpi,
ThreadData *td,
TileDataEnc *tile_data,
MODE_INFO *mi,
TOKENEXTRA **tp,
int mi_row, int mi_col,
BLOCK_SIZE bsize, int output_enabled,
RD_COST *rd_cost, PC_TREE *pc_tree) {
VP9_COMMON *const cm = &cpi->common;
TileInfo *const tile_info = &tile_data->tile_info;
MACROBLOCK *const x = &td->mb;
MACROBLOCKD *const xd = &x->e_mbd;
const int bsl = b_width_log2_lookup[bsize], hbs = (1 << bsl) / 4;
const int mis = cm->mi_stride;
PARTITION_TYPE partition;
BLOCK_SIZE subsize;
RD_COST this_rdc;
vp9_rd_cost_reset(&this_rdc);
if (mi_row >= cm->mi_rows || mi_col >= cm->mi_cols)
return;
subsize = (bsize >= BLOCK_8X8) ? mi[0].src_mi->mbmi.sb_type : BLOCK_4X4;
partition = partition_lookup[bsl][subsize];
if (bsize == BLOCK_32X32 && partition != PARTITION_NONE &&
subsize >= BLOCK_16X16) {
x->max_partition_size = BLOCK_32X32;
x->min_partition_size = BLOCK_8X8;
nonrd_pick_partition(cpi, td, tile_data, tp, mi_row, mi_col, bsize,
rd_cost, 0, INT64_MAX, pc_tree);
} else if (bsize == BLOCK_16X16 && partition != PARTITION_NONE) {
x->max_partition_size = BLOCK_16X16;
x->min_partition_size = BLOCK_8X8;
nonrd_pick_partition(cpi, td, tile_data, tp, mi_row, mi_col, bsize,
rd_cost, 0, INT64_MAX, pc_tree);
} else {
switch (partition) {
case PARTITION_NONE:
pc_tree->none.pred_pixel_ready = 1;
nonrd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col, rd_cost,
subsize, &pc_tree->none);
pc_tree->none.mic.mbmi = xd->mi[0].src_mi->mbmi;
pc_tree->none.skip_txfm[0] = x->skip_txfm[0];
pc_tree->none.skip = x->skip;
break;
case PARTITION_VERT:
pc_tree->vertical[0].pred_pixel_ready = 1;
nonrd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col, rd_cost,
subsize, &pc_tree->vertical[0]);
pc_tree->vertical[0].mic.mbmi = xd->mi[0].src_mi->mbmi;
pc_tree->vertical[0].skip_txfm[0] = x->skip_txfm[0];
pc_tree->vertical[0].skip = x->skip;
if (mi_col + hbs < cm->mi_cols) {
pc_tree->vertical[1].pred_pixel_ready = 1;
nonrd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col + hbs,
&this_rdc, subsize, &pc_tree->vertical[1]);
pc_tree->vertical[1].mic.mbmi = xd->mi[0].src_mi->mbmi;
pc_tree->vertical[1].skip_txfm[0] = x->skip_txfm[0];
pc_tree->vertical[1].skip = x->skip;
if (this_rdc.rate != INT_MAX && this_rdc.dist != INT64_MAX &&
rd_cost->rate != INT_MAX && rd_cost->dist != INT64_MAX) {
rd_cost->rate += this_rdc.rate;
rd_cost->dist += this_rdc.dist;
}
}
break;
case PARTITION_HORZ:
pc_tree->horizontal[0].pred_pixel_ready = 1;
nonrd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col, rd_cost,
subsize, &pc_tree->horizontal[0]);
pc_tree->horizontal[0].mic.mbmi = xd->mi[0].src_mi->mbmi;
pc_tree->horizontal[0].skip_txfm[0] = x->skip_txfm[0];
pc_tree->horizontal[0].skip = x->skip;
if (mi_row + hbs < cm->mi_rows) {
pc_tree->horizontal[1].pred_pixel_ready = 1;
nonrd_pick_sb_modes(cpi, tile_data, x, mi_row + hbs, mi_col,
&this_rdc, subsize, &pc_tree->horizontal[0]);
pc_tree->horizontal[1].mic.mbmi = xd->mi[0].src_mi->mbmi;
pc_tree->horizontal[1].skip_txfm[0] = x->skip_txfm[0];
pc_tree->horizontal[1].skip = x->skip;
if (this_rdc.rate != INT_MAX && this_rdc.dist != INT64_MAX &&
rd_cost->rate != INT_MAX && rd_cost->dist != INT64_MAX) {
rd_cost->rate += this_rdc.rate;
rd_cost->dist += this_rdc.dist;
}
}
break;
case PARTITION_SPLIT:
subsize = get_subsize(bsize, PARTITION_SPLIT);
nonrd_select_partition(cpi, td, tile_data, mi, tp, mi_row, mi_col,
subsize, output_enabled, rd_cost,
pc_tree->split[0]);
nonrd_select_partition(cpi, td, tile_data, mi + hbs, tp,
mi_row, mi_col + hbs, subsize, output_enabled,
&this_rdc, pc_tree->split[1]);
if (this_rdc.rate != INT_MAX && this_rdc.dist != INT64_MAX &&
rd_cost->rate != INT_MAX && rd_cost->dist != INT64_MAX) {
rd_cost->rate += this_rdc.rate;
rd_cost->dist += this_rdc.dist;
}
nonrd_select_partition(cpi, td, tile_data, mi + hbs * mis, tp,
mi_row + hbs, mi_col, subsize, output_enabled,
&this_rdc, pc_tree->split[2]);
if (this_rdc.rate != INT_MAX && this_rdc.dist != INT64_MAX &&
rd_cost->rate != INT_MAX && rd_cost->dist != INT64_MAX) {
rd_cost->rate += this_rdc.rate;
rd_cost->dist += this_rdc.dist;
}
nonrd_select_partition(cpi, td, tile_data, mi + hbs * mis + hbs, tp,
mi_row + hbs, mi_col + hbs, subsize,
output_enabled, &this_rdc, pc_tree->split[3]);
if (this_rdc.rate != INT_MAX && this_rdc.dist != INT64_MAX &&
rd_cost->rate != INT_MAX && rd_cost->dist != INT64_MAX) {
rd_cost->rate += this_rdc.rate;
rd_cost->dist += this_rdc.dist;
}
break;
default:
assert(0 && "Invalid partition type.");
break;
}
}
if (bsize == BLOCK_64X64 && output_enabled)
encode_sb_rt(cpi, td, tile_info, tp, mi_row, mi_col, 1, bsize, pc_tree);
}
static void nonrd_use_partition(VP9_COMP *cpi,
ThreadData *td,
TileDataEnc *tile_data,
MODE_INFO *mi,
TOKENEXTRA **tp,
int mi_row, int mi_col,
BLOCK_SIZE bsize, int output_enabled,
RD_COST *dummy_cost, PC_TREE *pc_tree) {
VP9_COMMON *const cm = &cpi->common;
TileInfo *tile_info = &tile_data->tile_info;
MACROBLOCK *const x = &td->mb;
MACROBLOCKD *const xd = &x->e_mbd;
const int bsl = b_width_log2_lookup[bsize], hbs = (1 << bsl) / 4;
const int mis = cm->mi_stride;
PARTITION_TYPE partition;
BLOCK_SIZE subsize;
if (mi_row >= cm->mi_rows || mi_col >= cm->mi_cols)
return;
subsize = (bsize >= BLOCK_8X8) ? mi[0].src_mi->mbmi.sb_type : BLOCK_4X4;
partition = partition_lookup[bsl][subsize];
if (output_enabled && bsize != BLOCK_4X4) {
int ctx = partition_plane_context(xd, mi_row, mi_col, bsize);
td->counts->partition[ctx][partition]++;
}
switch (partition) {
case PARTITION_NONE:
pc_tree->none.pred_pixel_ready = 1;
nonrd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col, dummy_cost,
subsize, &pc_tree->none);
pc_tree->none.mic.mbmi = xd->mi[0].src_mi->mbmi;
pc_tree->none.skip_txfm[0] = x->skip_txfm[0];
pc_tree->none.skip = x->skip;
encode_b_rt(cpi, td, tile_info, tp, mi_row, mi_col, output_enabled,
subsize, &pc_tree->none);
break;
case PARTITION_VERT:
pc_tree->vertical[0].pred_pixel_ready = 1;
nonrd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col, dummy_cost,
subsize, &pc_tree->vertical[0]);
pc_tree->vertical[0].mic.mbmi = xd->mi[0].src_mi->mbmi;
pc_tree->vertical[0].skip_txfm[0] = x->skip_txfm[0];
pc_tree->vertical[0].skip = x->skip;
encode_b_rt(cpi, td, tile_info, tp, mi_row, mi_col, output_enabled,
subsize, &pc_tree->vertical[0]);
if (mi_col + hbs < cm->mi_cols) {
pc_tree->vertical[1].pred_pixel_ready = 1;
nonrd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col + hbs,
dummy_cost, subsize, &pc_tree->vertical[1]);
pc_tree->vertical[1].mic.mbmi = xd->mi[0].src_mi->mbmi;
pc_tree->vertical[1].skip_txfm[0] = x->skip_txfm[0];
pc_tree->vertical[1].skip = x->skip;
encode_b_rt(cpi, td, tile_info, tp, mi_row, mi_col + hbs,
output_enabled, subsize, &pc_tree->vertical[1]);
}
break;
case PARTITION_HORZ:
pc_tree->horizontal[0].pred_pixel_ready = 1;
nonrd_pick_sb_modes(cpi, tile_data, x, mi_row, mi_col, dummy_cost,
subsize, &pc_tree->horizontal[0]);
pc_tree->horizontal[0].mic.mbmi = xd->mi[0].src_mi->mbmi;
pc_tree->horizontal[0].skip_txfm[0] = x->skip_txfm[0];
pc_tree->horizontal[0].skip = x->skip;
encode_b_rt(cpi, td, tile_info, tp, mi_row, mi_col, output_enabled,
subsize, &pc_tree->horizontal[0]);
if (mi_row + hbs < cm->mi_rows) {
pc_tree->horizontal[1].pred_pixel_ready = 1;
nonrd_pick_sb_modes(cpi, tile_data, x, mi_row + hbs, mi_col,
dummy_cost, subsize, &pc_tree->horizontal[0]);
pc_tree->horizontal[1].mic.mbmi = xd->mi[0].src_mi->mbmi;
pc_tree->horizontal[1].skip_txfm[0] = x->skip_txfm[0];
pc_tree->horizontal[1].skip = x->skip;
encode_b_rt(cpi, td, tile_info, tp, mi_row + hbs, mi_col,
output_enabled, subsize, &pc_tree->horizontal[1]);
}
break;
case PARTITION_SPLIT:
subsize = get_subsize(bsize, PARTITION_SPLIT);
nonrd_use_partition(cpi, td, tile_data, mi, tp, mi_row, mi_col,
subsize, output_enabled, dummy_cost,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
pc_tree->split[0]);
nonrd_use_partition(cpi, td, tile_data, mi + hbs, tp,
mi_row, mi_col + hbs, subsize, output_enabled,
dummy_cost, pc_tree->split[1]);
nonrd_use_partition(cpi, td, tile_data, mi + hbs * mis, tp,
mi_row + hbs, mi_col, subsize, output_enabled,
dummy_cost, pc_tree->split[2]);
nonrd_use_partition(cpi, td, tile_data, mi + hbs * mis + hbs, tp,
mi_row + hbs, mi_col + hbs, subsize, output_enabled,
dummy_cost, pc_tree->split[3]);
break;
default:
assert(0 && "Invalid partition type.");
break;
}
if (partition != PARTITION_SPLIT || bsize == BLOCK_8X8)
update_partition_context(xd, mi_row, mi_col, subsize, bsize);
}
static void encode_nonrd_sb_row(VP9_COMP *cpi,
ThreadData *td,
TileDataEnc *tile_data,
int mi_row,
TOKENEXTRA **tp) {
SPEED_FEATURES *const sf = &cpi->sf;
VP9_COMMON *const cm = &cpi->common;
TileInfo *const tile_info = &tile_data->tile_info;
MACROBLOCK *const x = &td->mb;
MACROBLOCKD *const xd = &x->e_mbd;
int mi_col;
// Initialize the left context for the new SB row
vpx_memset(&xd->left_context, 0, sizeof(xd->left_context));
vpx_memset(xd->left_seg_context, 0, sizeof(xd->left_seg_context));
// Code each SB in the row
for (mi_col = tile_info->mi_col_start; mi_col < tile_info->mi_col_end;
mi_col += MI_BLOCK_SIZE) {
RD_COST dummy_rdc;
const int idx_str = cm->mi_stride * mi_row + mi_col;
MODE_INFO *mi = cm->mi + idx_str;
BLOCK_SIZE bsize;
x->source_variance = UINT_MAX;
vp9_zero(x->pred_mv);
vp9_rd_cost_init(&dummy_rdc);
// Set the partition type of the 64X64 block
switch (sf->partition_search_type) {
case VAR_BASED_PARTITION:
choose_partitioning(cpi, tile_info, x, mi_row, mi_col);
nonrd_use_partition(cpi, td, tile_data, mi, tp, mi_row, mi_col,
BLOCK_64X64, 1, &dummy_rdc, td->pc_root);
break;
case SOURCE_VAR_BASED_PARTITION:
set_source_var_based_partition(cpi, tile_info, x, mi, mi_row, mi_col);
nonrd_use_partition(cpi, td, tile_data, mi, tp, mi_row, mi_col,
BLOCK_64X64, 1, &dummy_rdc, td->pc_root);
break;
case FIXED_PARTITION:
bsize = sf->partition_search_type == FIXED_PARTITION ?
sf->always_this_block_size :
get_nonrd_var_based_fixed_partition(cpi, x, mi_row, mi_col);
set_fixed_partitioning(cpi, tile_info, mi, mi_row, mi_col, bsize);
nonrd_use_partition(cpi, td, tile_data, mi, tp, mi_row, mi_col,
BLOCK_64X64, 1, &dummy_rdc, td->pc_root);
break;
case REFERENCE_PARTITION:
set_offsets(cpi, tile_info, x, mi_row, mi_col, BLOCK_64X64);
if (cpi->oxcf.aq_mode == CYCLIC_REFRESH_AQ && cm->seg.enabled &&
xd->mi[0].src_mi->mbmi.segment_id) {
auto_partition_range(cpi, tile_info, xd, mi_row, mi_col,
&x->min_partition_size,
&x->max_partition_size);
nonrd_pick_partition(cpi, td, tile_data, tp, mi_row, mi_col,
BLOCK_64X64, &dummy_rdc, 1,
INT64_MAX, td->pc_root);
} else {
choose_partitioning(cpi, tile_info, x, mi_row, mi_col);
nonrd_select_partition(cpi, td, tile_data, mi, tp, mi_row, mi_col,
BLOCK_64X64, 1, &dummy_rdc, td->pc_root);
}
break;
default:
assert(0);
break;
}
}
}
// end RTC play code
static int set_var_thresh_from_histogram(VP9_COMP *cpi) {
const SPEED_FEATURES *const sf = &cpi->sf;
const VP9_COMMON *const cm = &cpi->common;
const uint8_t *src = cpi->Source->y_buffer;
const uint8_t *last_src = cpi->Last_Source->y_buffer;
const int src_stride = cpi->Source->y_stride;
const int last_stride = cpi->Last_Source->y_stride;
// Pick cutoff threshold
const int cutoff = (MIN(cm->width, cm->height) >= 720) ?
(cm->MBs * VAR_HIST_LARGE_CUT_OFF / 100) :
(cm->MBs * VAR_HIST_SMALL_CUT_OFF / 100);
DECLARE_ALIGNED_ARRAY(16, int, hist, VAR_HIST_BINS);
diff *var16 = cpi->source_diff_var;
int sum = 0;
int i, j;
vpx_memset(hist, 0, VAR_HIST_BINS * sizeof(hist[0]));
for (i = 0; i < cm->mb_rows; i++) {
for (j = 0; j < cm->mb_cols; j++) {
#if CONFIG_VP9_HIGHBITDEPTH
if (cm->use_highbitdepth) {
switch (cm->bit_depth) {
case VPX_BITS_8:
vp9_highbd_get16x16var(src, src_stride, last_src, last_stride,
&var16->sse, &var16->sum);
break;
case VPX_BITS_10:
vp9_highbd_10_get16x16var(src, src_stride, last_src, last_stride,
&var16->sse, &var16->sum);
break;
case VPX_BITS_12:
vp9_highbd_12_get16x16var(src, src_stride, last_src, last_stride,
&var16->sse, &var16->sum);
break;
default:
assert(0 && "cm->bit_depth should be VPX_BITS_8, VPX_BITS_10"
" or VPX_BITS_12");
return -1;
}
} else {
vp9_get16x16var(src, src_stride, last_src, last_stride,
&var16->sse, &var16->sum);
}
#else
vp9_get16x16var(src, src_stride, last_src, last_stride,
&var16->sse, &var16->sum);
#endif // CONFIG_VP9_HIGHBITDEPTH
var16->var = var16->sse -
(((uint32_t)var16->sum * var16->sum) >> 8);
if (var16->var >= VAR_HIST_MAX_BG_VAR)
hist[VAR_HIST_BINS - 1]++;
else
hist[var16->var / VAR_HIST_FACTOR]++;
src += 16;
last_src += 16;
var16++;
}
src = src - cm->mb_cols * 16 + 16 * src_stride;
last_src = last_src - cm->mb_cols * 16 + 16 * last_stride;
}
cpi->source_var_thresh = 0;
if (hist[VAR_HIST_BINS - 1] < cutoff) {
for (i = 0; i < VAR_HIST_BINS - 1; i++) {
sum += hist[i];
if (sum > cutoff) {
cpi->source_var_thresh = (i + 1) * VAR_HIST_FACTOR;
return 0;
}
}
}
return sf->search_type_check_frequency;
}
static void source_var_based_partition_search_method(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
SPEED_FEATURES *const sf = &cpi->sf;
if (cm->frame_type == KEY_FRAME) {
// For key frame, use SEARCH_PARTITION.
sf->partition_search_type = SEARCH_PARTITION;
} else if (cm->intra_only) {
sf->partition_search_type = FIXED_PARTITION;
} else {
if (cm->last_width != cm->width || cm->last_height != cm->height) {
if (cpi->source_diff_var)
vpx_free(cpi->source_diff_var);
CHECK_MEM_ERROR(cm, cpi->source_diff_var,
vpx_calloc(cm->MBs, sizeof(diff)));
}
if (!cpi->frames_till_next_var_check)
cpi->frames_till_next_var_check = set_var_thresh_from_histogram(cpi);
if (cpi->frames_till_next_var_check > 0) {
sf->partition_search_type = FIXED_PARTITION;
cpi->frames_till_next_var_check--;
}
}
}
static int get_skip_encode_frame(const VP9_COMMON *cm, ThreadData *const td) {
unsigned int intra_count = 0, inter_count = 0;
int j;
for (j = 0; j < INTRA_INTER_CONTEXTS; ++j) {
intra_count += td->counts->intra_inter[j][0];
inter_count += td->counts->intra_inter[j][1];
}
return (intra_count << 2) < inter_count &&
cm->frame_type != KEY_FRAME &&
cm->show_frame;
}
void vp9_init_tile_data(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
const int tile_cols = 1 << cm->log2_tile_cols;
const int tile_rows = 1 << cm->log2_tile_rows;
int tile_col, tile_row;
TOKENEXTRA *pre_tok = cpi->tile_tok[0][0];
int tile_tok = 0;
if (cpi->tile_data == NULL) {
CHECK_MEM_ERROR(cm, cpi->tile_data,
vpx_malloc(tile_cols * tile_rows * sizeof(*cpi->tile_data)));
for (tile_row = 0; tile_row < tile_rows; ++tile_row)
for (tile_col = 0; tile_col < tile_cols; ++tile_col) {
TileDataEnc *tile_data =
&cpi->tile_data[tile_row * tile_cols + tile_col];
int i, j;
for (i = 0; i < BLOCK_SIZES; ++i) {
for (j = 0; j < MAX_MODES; ++j) {
tile_data->thresh_freq_fact[i][j] = 32;
tile_data->mode_map[i][j] = j;
}
}
}
}
for (tile_row = 0; tile_row < tile_rows; ++tile_row) {
for (tile_col = 0; tile_col < tile_cols; ++tile_col) {
TileInfo *tile_info =
&cpi->tile_data[tile_row * tile_cols + tile_col].tile_info;
vp9_tile_init(tile_info, cm, tile_row, tile_col);
cpi->tile_tok[tile_row][tile_col] = pre_tok + tile_tok;
pre_tok = cpi->tile_tok[tile_row][tile_col];
tile_tok = allocated_tokens(*tile_info);
}
}
}
void vp9_encode_tile(VP9_COMP *cpi, ThreadData *td,
int tile_row, int tile_col) {
VP9_COMMON *const cm = &cpi->common;
const int tile_cols = 1 << cm->log2_tile_cols;
TileDataEnc *this_tile =
&cpi->tile_data[tile_row * tile_cols + tile_col];
const TileInfo * const tile_info = &this_tile->tile_info;
TOKENEXTRA *tok = cpi->tile_tok[tile_row][tile_col];
int mi_row;
for (mi_row = tile_info->mi_row_start; mi_row < tile_info->mi_row_end;
mi_row += MI_BLOCK_SIZE) {
if (cpi->sf.use_nonrd_pick_mode)
encode_nonrd_sb_row(cpi, td, this_tile, mi_row, &tok);
else
encode_rd_sb_row(cpi, td, this_tile, mi_row, &tok);
}
cpi->tok_count[tile_row][tile_col] =
(unsigned int)(tok - cpi->tile_tok[tile_row][tile_col]);
assert(tok - cpi->tile_tok[tile_row][tile_col] <=
allocated_tokens(*tile_info));
}
static void encode_tiles(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
const int tile_cols = 1 << cm->log2_tile_cols;
const int tile_rows = 1 << cm->log2_tile_rows;
int tile_col, tile_row;
vp9_init_tile_data(cpi);
for (tile_row = 0; tile_row < tile_rows; ++tile_row)
for (tile_col = 0; tile_col < tile_cols; ++tile_col)
vp9_encode_tile(cpi, &cpi->td, tile_row, tile_col);
}
#if CONFIG_FP_MB_STATS
static int input_fpmb_stats(FIRSTPASS_MB_STATS *firstpass_mb_stats,
VP9_COMMON *cm, uint8_t **this_frame_mb_stats) {
uint8_t *mb_stats_in = firstpass_mb_stats->mb_stats_start +
cm->current_video_frame * cm->MBs * sizeof(uint8_t);
if (mb_stats_in > firstpass_mb_stats->mb_stats_end)
return EOF;
*this_frame_mb_stats = mb_stats_in;
return 1;
}
#endif
static void encode_frame_internal(VP9_COMP *cpi) {
SPEED_FEATURES *const sf = &cpi->sf;
RD_OPT *const rd_opt = &cpi->rd;
ThreadData *const td = &cpi->td;
MACROBLOCK *const x = &td->mb;
VP9_COMMON *const cm = &cpi->common;
MACROBLOCKD *const xd = &x->e_mbd;
RD_COUNTS *const rdc = &cpi->td.rd_counts;
xd->mi = cm->mi;
xd->mi[0].src_mi = &xd->mi[0];
vp9_zero(*td->counts);
vp9_zero(rdc->coef_counts);
vp9_zero(rdc->comp_pred_diff);
vp9_zero(rdc->filter_diff);
vp9_zero(rdc->tx_select_diff);
vp9_zero(rd_opt->tx_select_threshes);
xd->lossless = cm->base_qindex == 0 &&
cm->y_dc_delta_q == 0 &&
cm->uv_dc_delta_q == 0 &&
cm->uv_ac_delta_q == 0;
cm->tx_mode = select_tx_mode(cpi, xd);
if (cm->frame_type == KEY_FRAME &&
cpi->sf.use_nonrd_pick_mode &&
cpi->sf.partition_search_type == VAR_BASED_PARTITION) {
cm->tx_mode = ALLOW_16X16;
}
#if CONFIG_VP9_HIGHBITDEPTH
if (cm->use_highbitdepth)
x->fwd_txm4x4 = xd->lossless ? vp9_highbd_fwht4x4 : vp9_highbd_fdct4x4;
else
x->fwd_txm4x4 = xd->lossless ? vp9_fwht4x4 : vp9_fdct4x4;
x->highbd_itxm_add = xd->lossless ? vp9_highbd_iwht4x4_add :
vp9_highbd_idct4x4_add;
#else
x->fwd_txm4x4 = xd->lossless ? vp9_fwht4x4 : vp9_fdct4x4;
#endif // CONFIG_VP9_HIGHBITDEPTH
x->itxm_add = xd->lossless ? vp9_iwht4x4_add : vp9_idct4x4_add;
if (xd->lossless) {
x->optimize = 0;
cm->lf.filter_level = 0;
cpi->zbin_mode_boost_enabled = 0;
}
vp9_frame_init_quantizer(cpi);
vp9_initialize_rd_consts(cpi);
vp9_initialize_me_consts(cpi, cm->base_qindex);
init_encode_frame_mb_context(cpi);
cm->use_prev_frame_mvs = !cm->error_resilient_mode &&
cm->width == cm->last_width &&
cm->height == cm->last_height &&
!cm->intra_only &&
cm->last_show_frame;
// Special case: set prev_mi to NULL when the previous mode info
// context cannot be used.
cm->prev_mi = cm->use_prev_frame_mvs ?
cm->prev_mip + cm->mi_stride + 1 : NULL;
x->quant_fp = cpi->sf.use_quant_fp;
vp9_zero(x->skip_txfm);
if (sf->use_nonrd_pick_mode) {
// Initialize internal buffer pointers for rtc coding, where non-RD
// mode decision is used and hence no buffer pointer swap needed.
int i;
struct macroblock_plane *const p = x->plane;
struct macroblockd_plane *const pd = xd->plane;
PICK_MODE_CONTEXT *ctx = &cpi->td.pc_root->none;
for (i = 0; i < MAX_MB_PLANE; ++i) {
p[i].coeff = ctx->coeff_pbuf[i][0];
p[i].qcoeff = ctx->qcoeff_pbuf[i][0];
pd[i].dqcoeff = ctx->dqcoeff_pbuf[i][0];
p[i].eobs = ctx->eobs_pbuf[i][0];
}
vp9_zero(x->zcoeff_blk);
if (sf->partition_search_type == SOURCE_VAR_BASED_PARTITION)
source_var_based_partition_search_method(cpi);
}
{
struct vpx_usec_timer emr_timer;
vpx_usec_timer_start(&emr_timer);
#if CONFIG_FP_MB_STATS
if (cpi->use_fp_mb_stats) {
input_fpmb_stats(&cpi->twopass.firstpass_mb_stats, cm,
&cpi->twopass.this_frame_mb_stats);
}
#endif
// If allowed, encoding tiles in parallel with one thread handling one tile.
if (MIN(cpi->oxcf.max_threads, 1 << cm->log2_tile_cols) > 1)
vp9_encode_tiles_mt(cpi);
else
encode_tiles(cpi);
vpx_usec_timer_mark(&emr_timer);
cpi->time_encode_sb_row += vpx_usec_timer_elapsed(&emr_timer);
}
sf->skip_encode_frame = sf->skip_encode_sb ?
get_skip_encode_frame(cm, td) : 0;
#if 0
// Keep record of the total distortion this time around for future use
cpi->last_frame_distortion = cpi->frame_distortion;
#endif
}
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
static INTERP_FILTER get_interp_filter(
const int64_t threshes[SWITCHABLE_FILTER_CONTEXTS], int is_alt_ref) {
if (!is_alt_ref &&
threshes[EIGHTTAP_SMOOTH] > threshes[EIGHTTAP] &&
threshes[EIGHTTAP_SMOOTH] > threshes[EIGHTTAP_SHARP] &&
threshes[EIGHTTAP_SMOOTH] > threshes[SWITCHABLE - 1]) {
return EIGHTTAP_SMOOTH;
} else if (threshes[EIGHTTAP_SHARP] > threshes[EIGHTTAP] &&
threshes[EIGHTTAP_SHARP] > threshes[SWITCHABLE - 1]) {
return EIGHTTAP_SHARP;
} else if (threshes[EIGHTTAP] > threshes[SWITCHABLE - 1]) {
return EIGHTTAP;
} else {
return SWITCHABLE;
}
}
void vp9_encode_frame(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
RD_OPT *const rd_opt = &cpi->rd;
FRAME_COUNTS *counts = cpi->td.counts;
RD_COUNTS *const rdc = &cpi->td.rd_counts;
// In the longer term the encoder should be generalized to match the
// decoder such that we allow compound where one of the 3 buffers has a
// different sign bias and that buffer is then the fixed ref. However, this
// requires further work in the rd loop. For now the only supported encoder
// side behavior is where the ALT ref buffer has opposite sign bias to
// the other two.
if (!frame_is_intra_only(cm)) {
if ((cm->ref_frame_sign_bias[ALTREF_FRAME] ==
cm->ref_frame_sign_bias[GOLDEN_FRAME]) ||
(cm->ref_frame_sign_bias[ALTREF_FRAME] ==
cm->ref_frame_sign_bias[LAST_FRAME])) {
cm->allow_comp_inter_inter = 0;
} else {
cm->allow_comp_inter_inter = 1;
cm->comp_fixed_ref = ALTREF_FRAME;
cm->comp_var_ref[0] = LAST_FRAME;
cm->comp_var_ref[1] = GOLDEN_FRAME;
}
}
if (cpi->sf.frame_parameter_update) {
int i;
// This code does a single RD pass over the whole frame assuming
// either compound, single or hybrid prediction as per whatever has
// worked best for that type of frame in the past.
// It also predicts whether another coding mode would have worked
// better that this coding mode. If that is the case, it remembers
// that for subsequent frames.
// It does the same analysis for transform size selection also.
const MV_REFERENCE_FRAME frame_type = get_frame_type(cpi);
int64_t *const mode_thrs = rd_opt->prediction_type_threshes[frame_type];
int64_t *const filter_thrs = rd_opt->filter_threshes[frame_type];
int *const tx_thrs = rd_opt->tx_select_threshes[frame_type];
const int is_alt_ref = frame_type == ALTREF_FRAME;
/* prediction (compound, single or hybrid) mode selection */
if (is_alt_ref || !cm->allow_comp_inter_inter)
cm->reference_mode = SINGLE_REFERENCE;
else if (mode_thrs[COMPOUND_REFERENCE] > mode_thrs[SINGLE_REFERENCE] &&
mode_thrs[COMPOUND_REFERENCE] >
mode_thrs[REFERENCE_MODE_SELECT] &&
check_dual_ref_flags(cpi) &&
cpi->static_mb_pct == 100)
cm->reference_mode = COMPOUND_REFERENCE;
else if (mode_thrs[SINGLE_REFERENCE] > mode_thrs[REFERENCE_MODE_SELECT])
cm->reference_mode = SINGLE_REFERENCE;
else
cm->reference_mode = REFERENCE_MODE_SELECT;
if (cm->interp_filter == SWITCHABLE)
cm->interp_filter = get_interp_filter(filter_thrs, is_alt_ref);
encode_frame_internal(cpi);
for (i = 0; i < REFERENCE_MODES; ++i)
mode_thrs[i] = (mode_thrs[i] + rdc->comp_pred_diff[i] / cm->MBs) / 2;
for (i = 0; i < SWITCHABLE_FILTER_CONTEXTS; ++i)
filter_thrs[i] = (filter_thrs[i] + rdc->filter_diff[i] / cm->MBs) / 2;
for (i = 0; i < TX_MODES; ++i) {
int64_t pd = rdc->tx_select_diff[i];
if (i == TX_MODE_SELECT)
pd -= RDCOST(cpi->td.mb.rdmult, cpi->td.mb.rddiv, 2048 * (TX_SIZES - 1),
0);
tx_thrs[i] = (tx_thrs[i] + (int)(pd / cm->MBs)) / 2;
}
if (cm->reference_mode == REFERENCE_MODE_SELECT) {
int single_count_zero = 0;
int comp_count_zero = 0;
for (i = 0; i < COMP_INTER_CONTEXTS; i++) {
single_count_zero += counts->comp_inter[i][0];
comp_count_zero += counts->comp_inter[i][1];
}
if (comp_count_zero == 0) {
cm->reference_mode = SINGLE_REFERENCE;
vp9_zero(counts->comp_inter);
} else if (single_count_zero == 0) {
cm->reference_mode = COMPOUND_REFERENCE;
vp9_zero(counts->comp_inter);
}
}
if (cm->tx_mode == TX_MODE_SELECT) {
int count4x4 = 0;
int count8x8_lp = 0, count8x8_8x8p = 0;
int count16x16_16x16p = 0, count16x16_lp = 0;
int count32x32 = 0;
for (i = 0; i < TX_SIZE_CONTEXTS; ++i) {
count4x4 += counts->tx.p32x32[i][TX_4X4];
count4x4 += counts->tx.p16x16[i][TX_4X4];
count4x4 += counts->tx.p8x8[i][TX_4X4];
count8x8_lp += counts->tx.p32x32[i][TX_8X8];
count8x8_lp += counts->tx.p16x16[i][TX_8X8];
count8x8_8x8p += counts->tx.p8x8[i][TX_8X8];
count16x16_16x16p += counts->tx.p16x16[i][TX_16X16];
count16x16_lp += counts->tx.p32x32[i][TX_16X16];
count32x32 += counts->tx.p32x32[i][TX_32X32];
}
if (count4x4 == 0 && count16x16_lp == 0 && count16x16_16x16p == 0 &&
count32x32 == 0) {
cm->tx_mode = ALLOW_8X8;
reset_skip_tx_size(cm, TX_8X8);
} else if (count8x8_8x8p == 0 && count16x16_16x16p == 0 &&
count8x8_lp == 0 && count16x16_lp == 0 && count32x32 == 0) {
cm->tx_mode = ONLY_4X4;
reset_skip_tx_size(cm, TX_4X4);
32x32 transform for superblocks. This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds code all over the place to wrap that in the bitstream/encoder/decoder/RD. Some implementation notes (these probably need careful review): - token range is extended by 1 bit, since the value range out of this transform is [-16384,16383]. - the coefficients coming out of the FDCT are manually scaled back by 1 bit, or else they won't fit in int16_t (they are 17 bits). Because of this, the RD error scoring does not right-shift the MSE score by two (unlike for 4x4/8x8/16x16). - to compensate for this loss in precision, the quantizer is halved also. This is currently a little hacky. - FDCT and IDCT is double-only right now. Needs a fixed-point impl. - There are no default probabilities for the 32x32 transform yet; I'm simply using the 16x16 luma ones. A future commit will add newly generated probabilities for all transforms. - No ADST version. I don't think we'll add one for this level; if an ADST is desired, transform-size selection can scale back to 16x16 or lower, and use an ADST at that level. Additional notes specific to Debargha's DWT/DCT hybrid: - coefficient scale is different for the top/left 16x16 (DCT-over-DWT) block than for the rest (DWT pixel differences) of the block. Therefore, RD error scoring isn't easily scalable between coefficient and pixel domain. Thus, unfortunately, we need to compute the RD distortion in the pixel domain until we figure out how to scale these appropriately. Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
2012-12-07 23:45:05 +01:00
} else if (count8x8_lp == 0 && count16x16_lp == 0 && count4x4 == 0) {
cm->tx_mode = ALLOW_32X32;
32x32 transform for superblocks. This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds code all over the place to wrap that in the bitstream/encoder/decoder/RD. Some implementation notes (these probably need careful review): - token range is extended by 1 bit, since the value range out of this transform is [-16384,16383]. - the coefficients coming out of the FDCT are manually scaled back by 1 bit, or else they won't fit in int16_t (they are 17 bits). Because of this, the RD error scoring does not right-shift the MSE score by two (unlike for 4x4/8x8/16x16). - to compensate for this loss in precision, the quantizer is halved also. This is currently a little hacky. - FDCT and IDCT is double-only right now. Needs a fixed-point impl. - There are no default probabilities for the 32x32 transform yet; I'm simply using the 16x16 luma ones. A future commit will add newly generated probabilities for all transforms. - No ADST version. I don't think we'll add one for this level; if an ADST is desired, transform-size selection can scale back to 16x16 or lower, and use an ADST at that level. Additional notes specific to Debargha's DWT/DCT hybrid: - coefficient scale is different for the top/left 16x16 (DCT-over-DWT) block than for the rest (DWT pixel differences) of the block. Therefore, RD error scoring isn't easily scalable between coefficient and pixel domain. Thus, unfortunately, we need to compute the RD distortion in the pixel domain until we figure out how to scale these appropriately. Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
2012-12-07 23:45:05 +01:00
} else if (count32x32 == 0 && count8x8_lp == 0 && count4x4 == 0) {
cm->tx_mode = ALLOW_16X16;
reset_skip_tx_size(cm, TX_16X16);
}
}
} else {
cm->reference_mode = SINGLE_REFERENCE;
encode_frame_internal(cpi);
}
}
static void sum_intra_stats(FRAME_COUNTS *counts, const MODE_INFO *mi) {
const PREDICTION_MODE y_mode = mi->mbmi.mode;
const PREDICTION_MODE uv_mode = mi->mbmi.uv_mode;
const BLOCK_SIZE bsize = mi->mbmi.sb_type;
if (bsize < BLOCK_8X8) {
int idx, idy;
const int num_4x4_w = num_4x4_blocks_wide_lookup[bsize];
const int num_4x4_h = num_4x4_blocks_high_lookup[bsize];
for (idy = 0; idy < 2; idy += num_4x4_h)
for (idx = 0; idx < 2; idx += num_4x4_w)
++counts->y_mode[0][mi->bmi[idy * 2 + idx].as_mode];
} else {
++counts->y_mode[size_group_lookup[bsize]][y_mode];
}
++counts->uv_mode[y_mode][uv_mode];
2010-05-18 17:58:33 +02:00
}
static int get_zbin_mode_boost(const MB_MODE_INFO *mbmi, int enabled) {
if (enabled) {
if (is_inter_block(mbmi)) {
if (mbmi->mode == ZEROMV) {
return mbmi->ref_frame[0] != LAST_FRAME ? GF_ZEROMV_ZBIN_BOOST
: LF_ZEROMV_ZBIN_BOOST;
} else {
return mbmi->sb_type < BLOCK_8X8 ? SPLIT_MV_ZBIN_BOOST
: MV_ZBIN_BOOST;
}
} else {
return INTRA_ZBIN_BOOST;
}
} else {
return 0;
}
}
static void encode_superblock(VP9_COMP *cpi, ThreadData *td,
TOKENEXTRA **t, int output_enabled,
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
int mi_row, int mi_col, BLOCK_SIZE bsize,
PICK_MODE_CONTEXT *ctx) {
VP9_COMMON *const cm = &cpi->common;
MACROBLOCK *const x = &td->mb;
MACROBLOCKD *const xd = &x->e_mbd;
MODE_INFO *mi_8x8 = xd->mi;
MODE_INFO *mi = mi_8x8;
MB_MODE_INFO *mbmi = &mi->mbmi;
const int seg_skip = vp9_segfeature_active(&cm->seg, mbmi->segment_id,
SEG_LVL_SKIP);
const int mis = cm->mi_stride;
const int mi_width = num_8x8_blocks_wide_lookup[bsize];
const int mi_height = num_8x8_blocks_high_lookup[bsize];
x->skip_recode = !x->select_tx_size && mbmi->sb_type >= BLOCK_8X8 &&
cpi->oxcf.aq_mode != COMPLEXITY_AQ &&
cpi->oxcf.aq_mode != CYCLIC_REFRESH_AQ &&
cpi->sf.allow_skip_recode;
if (!x->skip_recode && !cpi->sf.use_nonrd_pick_mode)
vpx_memset(x->skip_txfm, 0, sizeof(x->skip_txfm));
x->skip_optimize = ctx->is_coded;
ctx->is_coded = 1;
x->use_lp32x32fdct = cpi->sf.use_lp32x32fdct;
x->skip_encode = (!output_enabled && cpi->sf.skip_encode_frame &&
x->q_index < QIDX_SKIP_THRESH);
if (x->skip_encode)
return;
set_ref_ptrs(cm, xd, mbmi->ref_frame[0], mbmi->ref_frame[1]);
// Experimental code. Special case for gf and arf zeromv modes.
// Increase zbin size to suppress noise
cpi->zbin_mode_boost = get_zbin_mode_boost(mbmi,
cpi->zbin_mode_boost_enabled);
vp9_update_zbin_extra(cpi, x);
if (!is_inter_block(mbmi)) {
int plane;
mbmi->skip = 1;
for (plane = 0; plane < MAX_MB_PLANE; ++plane)
vp9_encode_intra_block_plane(x, MAX(bsize, BLOCK_8X8), plane);
if (output_enabled)
sum_intra_stats(td->counts, mi);
vp9_tokenize_sb(cpi, td, t, !output_enabled, MAX(bsize, BLOCK_8X8));
} else {
int ref;
const int is_compound = has_second_ref(mbmi);
for (ref = 0; ref < 1 + is_compound; ++ref) {
YV12_BUFFER_CONFIG *cfg = get_ref_frame_buffer(cpi,
mbmi->ref_frame[ref]);
vp9_setup_pre_planes(xd, ref, cfg, mi_row, mi_col,
&xd->block_refs[ref]->sf);
}
if (!(cpi->sf.reuse_inter_pred_sby && ctx->pred_pixel_ready) || seg_skip)
vp9_build_inter_predictors_sby(xd, mi_row, mi_col, MAX(bsize, BLOCK_8X8));
vp9_build_inter_predictors_sbuv(xd, mi_row, mi_col, MAX(bsize, BLOCK_8X8));
vp9_encode_sb(x, MAX(bsize, BLOCK_8X8));
vp9_tokenize_sb(cpi, td, t, !output_enabled, MAX(bsize, BLOCK_8X8));
}
if (output_enabled) {
if (cm->tx_mode == TX_MODE_SELECT &&
mbmi->sb_type >= BLOCK_8X8 &&
!(is_inter_block(mbmi) && (mbmi->skip || seg_skip))) {
++get_tx_counts(max_txsize_lookup[bsize], vp9_get_tx_size_context(xd),
&td->counts->tx)[mbmi->tx_size];
} else {
int x, y;
TX_SIZE tx_size;
// The new intra coding scheme requires no change of transform size
if (is_inter_block(&mi->mbmi)) {
tx_size = MIN(tx_mode_to_biggest_tx_size[cm->tx_mode],
max_txsize_lookup[bsize]);
} else {
tx_size = (bsize >= BLOCK_8X8) ? mbmi->tx_size : TX_4X4;
}
for (y = 0; y < mi_height; y++)
for (x = 0; x < mi_width; x++)
if (mi_col + x < cm->mi_cols && mi_row + y < cm->mi_rows)
mi_8x8[mis * y + x].src_mi->mbmi.tx_size = tx_size;
}
}
}