vpx/vp8/decoder/dequantize.c

540 lines
12 KiB
C
Raw Normal View History

2010-05-18 17:58:33 +02:00
/*
* Copyright (c) 2010 The WebM project authors. All Rights Reserved.
2010-05-18 17:58:33 +02:00
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
2010-05-18 17:58:33 +02:00
*/
#include "vpx_ports/config.h"
#include "dequantize.h"
#include "vp8/common/idct.h"
2010-05-18 17:58:33 +02:00
#include "vpx_mem/vpx_mem.h"
#include "onyxd_int.h"
2010-05-18 17:58:33 +02:00
extern void vp8_short_idct4x4llm_c(short *input, short *output, int pitch);
2010-05-18 17:58:33 +02:00
extern void vp8_short_idct4x4llm_1_c(short *input, short *output, int pitch);
extern void vp8_short_idct8x8_c(short *input, short *output, int pitch);
extern void vp8_short_idct8x8_1_c(short *input, short *output, int pitch);
2010-05-18 17:58:33 +02:00
Add lossless compression mode. This commit adds lossless compression capability to the experimental branch. The lossless experiment can be enabled using --enable-lossless in configure. When the experiment is enabled, the encoder will use lossless compression mode by command line option --lossless, and the decoder automatically recognizes a losslessly encoded clip and decodes accordingly. To achieve the lossless coding, this commit has changed the following: 1. To encode at lossless mode, encoder forces the use of unit quantizer, i.e, Q 0, where effective quantization is 1. Encoder also disables the usage of 8x8 transform and allows only 4x4 transform; 2. At Q 0, the first order 4x4 DCT/IDCT have been switched over to a pair of forward and inverse Walsh-Hadamard Transform (http://goo.gl/EIsfy), with proper scaling applied to match the range of the original 4x4 DCT/IDCT pair; 3. At Q 0, the second order remains to use the previous walsh-hadamard transform pair. However, to maintain the reversibility in second order transform at Q 0, scaling down is applied to first order DC coefficients prior to forward transform, and scaling up is applied to the second order output prior to quantization. Symmetric upscaling and downscaling are added around inverse second order transform; 4. At lossless mode, encoder also disables a number of minor features to ensure no loss is introduced, these features includes: a. Trellis quantization optimization b. Loop filtering c. Aggressive zero-binning, rounding and zero-bin boosting d. Mode based zero-bin boosting Lossless coding test was performed on all clips within the derf set, to verify that the commit has achieved lossless compression for all clips. The average compression ratio is around 2.57 to 1. (http://goo.gl/dEShs) Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
2012-06-14 04:03:31 +02:00
#if CONFIG_LOSSLESS
extern void vp8_short_inv_walsh4x4_x8_c(short *input, short *output, int pitch);
extern void vp8_short_inv_walsh4x4_1_x8_c(short *input, short *output, int pitch);
#endif
#ifdef DEC_DEBUG
extern int dec_debug;
#endif
2010-05-18 17:58:33 +02:00
void vp8_dequantize_b_c(BLOCKD *d) {
int i;
short *DQ = d->dqcoeff;
short *Q = d->qcoeff;
short *DQC = d->dequant;
2010-05-18 17:58:33 +02:00
for (i = 0; i < 16; i++) {
DQ[i] = Q[i] * DQC[i];
}
2010-05-18 17:58:33 +02:00
}
void vp8_ht_dequant_idct_add_c(TX_TYPE tx_type, short *input, short *dq,
unsigned char *pred, unsigned char *dest,
int pitch, int stride) {
short output[16];
short *diff_ptr = output;
int r, c;
int i;
for (i = 0; i < 16; i++) {
input[i] = dq[i] * input[i];
}
vp8_ihtllm_c(input, output, 4 << 1, tx_type, 4);
vpx_memset(input, 0, 32);
for (r = 0; r < 4; r++) {
for (c = 0; c < 4; c++) {
int a = diff_ptr[c] + pred[c];
if (a < 0)
a = 0;
if (a > 255)
a = 255;
dest[c] = (unsigned char) a;
}
dest += stride;
diff_ptr += 4;
pred += pitch;
}
}
void vp8_ht_dequant_idct_add_8x8_c(TX_TYPE tx_type, short *input, short *dq,
unsigned char *pred, unsigned char *dest,
int pitch, int stride) {
short output[64];
short *diff_ptr = output;
int b, r, c;
int i;
unsigned char *origdest = dest;
unsigned char *origpred = pred;
input[0] = dq[0] * input[0];
for (i = 1; i < 64; i++) {
input[i] = dq[1] * input[i];
}
vp8_ihtllm_c(input, output, 16, tx_type, 8);
vpx_memset(input, 0, 128);
for (b = 0; b < 4; b++) {
for (r = 0; r < 4; r++) {
for (c = 0; c < 4; c++) {
int a = diff_ptr[c] + pred[c];
if (a < 0)
a = 0;
if (a > 255)
a = 255;
dest[c] = (unsigned char) a;
}
dest += stride;
diff_ptr += 8;
pred += pitch;
}
// shift buffer pointers to next 4x4 block in the submacroblock
diff_ptr = output + (b + 1) / 2 * 4 * 8 + ((b + 1) % 2) * 4;
dest = origdest + (b + 1) / 2 * 4 * stride + ((b + 1) % 2) * 4;
pred = origpred + (b + 1) / 2 * 4 * pitch + ((b + 1) % 2) * 4;
}
}
void vp8_dequant_idct_add_c(short *input, short *dq, unsigned char *pred,
unsigned char *dest, int pitch, int stride) {
short output[16];
short *diff_ptr = output;
int r, c;
int i;
2010-05-18 17:58:33 +02:00
for (i = 0; i < 16; i++) {
input[i] = dq[i] * input[i];
}
/* the idct halves ( >> 1) the pitch */
vp8_short_idct4x4llm_c(input, output, 4 << 1);
vpx_memset(input, 0, 32);
for (r = 0; r < 4; r++) {
for (c = 0; c < 4; c++) {
int a = diff_ptr[c] + pred[c];
if (a < 0)
a = 0;
if (a > 255)
a = 255;
dest[c] = (unsigned char) a;
}
dest += stride;
diff_ptr += 4;
pred += pitch;
}
2010-05-18 17:58:33 +02:00
}
void vp8_dequant_dc_idct_add_c(short *input, short *dq, unsigned char *pred,
unsigned char *dest, int pitch, int stride,
int Dc) {
int i;
short output[16];
short *diff_ptr = output;
int r, c;
2010-05-18 17:58:33 +02:00
input[0] = (short)Dc;
for (i = 1; i < 16; i++) {
input[i] = dq[i] * input[i];
}
/* the idct halves ( >> 1) the pitch */
vp8_short_idct4x4llm_c(input, output, 4 << 1);
vpx_memset(input, 0, 32);
for (r = 0; r < 4; r++) {
for (c = 0; c < 4; c++) {
int a = diff_ptr[c] + pred[c];
if (a < 0)
a = 0;
if (a > 255)
a = 255;
dest[c] = (unsigned char) a;
}
dest += stride;
diff_ptr += 4;
pred += pitch;
}
2010-05-18 17:58:33 +02:00
}
Add lossless compression mode. This commit adds lossless compression capability to the experimental branch. The lossless experiment can be enabled using --enable-lossless in configure. When the experiment is enabled, the encoder will use lossless compression mode by command line option --lossless, and the decoder automatically recognizes a losslessly encoded clip and decodes accordingly. To achieve the lossless coding, this commit has changed the following: 1. To encode at lossless mode, encoder forces the use of unit quantizer, i.e, Q 0, where effective quantization is 1. Encoder also disables the usage of 8x8 transform and allows only 4x4 transform; 2. At Q 0, the first order 4x4 DCT/IDCT have been switched over to a pair of forward and inverse Walsh-Hadamard Transform (http://goo.gl/EIsfy), with proper scaling applied to match the range of the original 4x4 DCT/IDCT pair; 3. At Q 0, the second order remains to use the previous walsh-hadamard transform pair. However, to maintain the reversibility in second order transform at Q 0, scaling down is applied to first order DC coefficients prior to forward transform, and scaling up is applied to the second order output prior to quantization. Symmetric upscaling and downscaling are added around inverse second order transform; 4. At lossless mode, encoder also disables a number of minor features to ensure no loss is introduced, these features includes: a. Trellis quantization optimization b. Loop filtering c. Aggressive zero-binning, rounding and zero-bin boosting d. Mode based zero-bin boosting Lossless coding test was performed on all clips within the derf set, to verify that the commit has achieved lossless compression for all clips. The average compression ratio is around 2.57 to 1. (http://goo.gl/dEShs) Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
2012-06-14 04:03:31 +02:00
#if CONFIG_LOSSLESS
void vp8_dequant_idct_add_lossless_c(short *input, short *dq, unsigned char *pred,
unsigned char *dest, int pitch, int stride) {
short output[16];
short *diff_ptr = output;
int r, c;
int i;
Add lossless compression mode. This commit adds lossless compression capability to the experimental branch. The lossless experiment can be enabled using --enable-lossless in configure. When the experiment is enabled, the encoder will use lossless compression mode by command line option --lossless, and the decoder automatically recognizes a losslessly encoded clip and decodes accordingly. To achieve the lossless coding, this commit has changed the following: 1. To encode at lossless mode, encoder forces the use of unit quantizer, i.e, Q 0, where effective quantization is 1. Encoder also disables the usage of 8x8 transform and allows only 4x4 transform; 2. At Q 0, the first order 4x4 DCT/IDCT have been switched over to a pair of forward and inverse Walsh-Hadamard Transform (http://goo.gl/EIsfy), with proper scaling applied to match the range of the original 4x4 DCT/IDCT pair; 3. At Q 0, the second order remains to use the previous walsh-hadamard transform pair. However, to maintain the reversibility in second order transform at Q 0, scaling down is applied to first order DC coefficients prior to forward transform, and scaling up is applied to the second order output prior to quantization. Symmetric upscaling and downscaling are added around inverse second order transform; 4. At lossless mode, encoder also disables a number of minor features to ensure no loss is introduced, these features includes: a. Trellis quantization optimization b. Loop filtering c. Aggressive zero-binning, rounding and zero-bin boosting d. Mode based zero-bin boosting Lossless coding test was performed on all clips within the derf set, to verify that the commit has achieved lossless compression for all clips. The average compression ratio is around 2.57 to 1. (http://goo.gl/dEShs) Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
2012-06-14 04:03:31 +02:00
for (i = 0; i < 16; i++) {
input[i] = dq[i] * input[i];
}
Add lossless compression mode. This commit adds lossless compression capability to the experimental branch. The lossless experiment can be enabled using --enable-lossless in configure. When the experiment is enabled, the encoder will use lossless compression mode by command line option --lossless, and the decoder automatically recognizes a losslessly encoded clip and decodes accordingly. To achieve the lossless coding, this commit has changed the following: 1. To encode at lossless mode, encoder forces the use of unit quantizer, i.e, Q 0, where effective quantization is 1. Encoder also disables the usage of 8x8 transform and allows only 4x4 transform; 2. At Q 0, the first order 4x4 DCT/IDCT have been switched over to a pair of forward and inverse Walsh-Hadamard Transform (http://goo.gl/EIsfy), with proper scaling applied to match the range of the original 4x4 DCT/IDCT pair; 3. At Q 0, the second order remains to use the previous walsh-hadamard transform pair. However, to maintain the reversibility in second order transform at Q 0, scaling down is applied to first order DC coefficients prior to forward transform, and scaling up is applied to the second order output prior to quantization. Symmetric upscaling and downscaling are added around inverse second order transform; 4. At lossless mode, encoder also disables a number of minor features to ensure no loss is introduced, these features includes: a. Trellis quantization optimization b. Loop filtering c. Aggressive zero-binning, rounding and zero-bin boosting d. Mode based zero-bin boosting Lossless coding test was performed on all clips within the derf set, to verify that the commit has achieved lossless compression for all clips. The average compression ratio is around 2.57 to 1. (http://goo.gl/dEShs) Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
2012-06-14 04:03:31 +02:00
vp8_short_inv_walsh4x4_x8_c(input, output, 4 << 1);
Add lossless compression mode. This commit adds lossless compression capability to the experimental branch. The lossless experiment can be enabled using --enable-lossless in configure. When the experiment is enabled, the encoder will use lossless compression mode by command line option --lossless, and the decoder automatically recognizes a losslessly encoded clip and decodes accordingly. To achieve the lossless coding, this commit has changed the following: 1. To encode at lossless mode, encoder forces the use of unit quantizer, i.e, Q 0, where effective quantization is 1. Encoder also disables the usage of 8x8 transform and allows only 4x4 transform; 2. At Q 0, the first order 4x4 DCT/IDCT have been switched over to a pair of forward and inverse Walsh-Hadamard Transform (http://goo.gl/EIsfy), with proper scaling applied to match the range of the original 4x4 DCT/IDCT pair; 3. At Q 0, the second order remains to use the previous walsh-hadamard transform pair. However, to maintain the reversibility in second order transform at Q 0, scaling down is applied to first order DC coefficients prior to forward transform, and scaling up is applied to the second order output prior to quantization. Symmetric upscaling and downscaling are added around inverse second order transform; 4. At lossless mode, encoder also disables a number of minor features to ensure no loss is introduced, these features includes: a. Trellis quantization optimization b. Loop filtering c. Aggressive zero-binning, rounding and zero-bin boosting d. Mode based zero-bin boosting Lossless coding test was performed on all clips within the derf set, to verify that the commit has achieved lossless compression for all clips. The average compression ratio is around 2.57 to 1. (http://goo.gl/dEShs) Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
2012-06-14 04:03:31 +02:00
vpx_memset(input, 0, 32);
Add lossless compression mode. This commit adds lossless compression capability to the experimental branch. The lossless experiment can be enabled using --enable-lossless in configure. When the experiment is enabled, the encoder will use lossless compression mode by command line option --lossless, and the decoder automatically recognizes a losslessly encoded clip and decodes accordingly. To achieve the lossless coding, this commit has changed the following: 1. To encode at lossless mode, encoder forces the use of unit quantizer, i.e, Q 0, where effective quantization is 1. Encoder also disables the usage of 8x8 transform and allows only 4x4 transform; 2. At Q 0, the first order 4x4 DCT/IDCT have been switched over to a pair of forward and inverse Walsh-Hadamard Transform (http://goo.gl/EIsfy), with proper scaling applied to match the range of the original 4x4 DCT/IDCT pair; 3. At Q 0, the second order remains to use the previous walsh-hadamard transform pair. However, to maintain the reversibility in second order transform at Q 0, scaling down is applied to first order DC coefficients prior to forward transform, and scaling up is applied to the second order output prior to quantization. Symmetric upscaling and downscaling are added around inverse second order transform; 4. At lossless mode, encoder also disables a number of minor features to ensure no loss is introduced, these features includes: a. Trellis quantization optimization b. Loop filtering c. Aggressive zero-binning, rounding and zero-bin boosting d. Mode based zero-bin boosting Lossless coding test was performed on all clips within the derf set, to verify that the commit has achieved lossless compression for all clips. The average compression ratio is around 2.57 to 1. (http://goo.gl/dEShs) Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
2012-06-14 04:03:31 +02:00
for (r = 0; r < 4; r++) {
for (c = 0; c < 4; c++) {
int a = diff_ptr[c] + pred[c];
Add lossless compression mode. This commit adds lossless compression capability to the experimental branch. The lossless experiment can be enabled using --enable-lossless in configure. When the experiment is enabled, the encoder will use lossless compression mode by command line option --lossless, and the decoder automatically recognizes a losslessly encoded clip and decodes accordingly. To achieve the lossless coding, this commit has changed the following: 1. To encode at lossless mode, encoder forces the use of unit quantizer, i.e, Q 0, where effective quantization is 1. Encoder also disables the usage of 8x8 transform and allows only 4x4 transform; 2. At Q 0, the first order 4x4 DCT/IDCT have been switched over to a pair of forward and inverse Walsh-Hadamard Transform (http://goo.gl/EIsfy), with proper scaling applied to match the range of the original 4x4 DCT/IDCT pair; 3. At Q 0, the second order remains to use the previous walsh-hadamard transform pair. However, to maintain the reversibility in second order transform at Q 0, scaling down is applied to first order DC coefficients prior to forward transform, and scaling up is applied to the second order output prior to quantization. Symmetric upscaling and downscaling are added around inverse second order transform; 4. At lossless mode, encoder also disables a number of minor features to ensure no loss is introduced, these features includes: a. Trellis quantization optimization b. Loop filtering c. Aggressive zero-binning, rounding and zero-bin boosting d. Mode based zero-bin boosting Lossless coding test was performed on all clips within the derf set, to verify that the commit has achieved lossless compression for all clips. The average compression ratio is around 2.57 to 1. (http://goo.gl/dEShs) Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
2012-06-14 04:03:31 +02:00
if (a < 0)
a = 0;
Add lossless compression mode. This commit adds lossless compression capability to the experimental branch. The lossless experiment can be enabled using --enable-lossless in configure. When the experiment is enabled, the encoder will use lossless compression mode by command line option --lossless, and the decoder automatically recognizes a losslessly encoded clip and decodes accordingly. To achieve the lossless coding, this commit has changed the following: 1. To encode at lossless mode, encoder forces the use of unit quantizer, i.e, Q 0, where effective quantization is 1. Encoder also disables the usage of 8x8 transform and allows only 4x4 transform; 2. At Q 0, the first order 4x4 DCT/IDCT have been switched over to a pair of forward and inverse Walsh-Hadamard Transform (http://goo.gl/EIsfy), with proper scaling applied to match the range of the original 4x4 DCT/IDCT pair; 3. At Q 0, the second order remains to use the previous walsh-hadamard transform pair. However, to maintain the reversibility in second order transform at Q 0, scaling down is applied to first order DC coefficients prior to forward transform, and scaling up is applied to the second order output prior to quantization. Symmetric upscaling and downscaling are added around inverse second order transform; 4. At lossless mode, encoder also disables a number of minor features to ensure no loss is introduced, these features includes: a. Trellis quantization optimization b. Loop filtering c. Aggressive zero-binning, rounding and zero-bin boosting d. Mode based zero-bin boosting Lossless coding test was performed on all clips within the derf set, to verify that the commit has achieved lossless compression for all clips. The average compression ratio is around 2.57 to 1. (http://goo.gl/dEShs) Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
2012-06-14 04:03:31 +02:00
if (a > 255)
a = 255;
Add lossless compression mode. This commit adds lossless compression capability to the experimental branch. The lossless experiment can be enabled using --enable-lossless in configure. When the experiment is enabled, the encoder will use lossless compression mode by command line option --lossless, and the decoder automatically recognizes a losslessly encoded clip and decodes accordingly. To achieve the lossless coding, this commit has changed the following: 1. To encode at lossless mode, encoder forces the use of unit quantizer, i.e, Q 0, where effective quantization is 1. Encoder also disables the usage of 8x8 transform and allows only 4x4 transform; 2. At Q 0, the first order 4x4 DCT/IDCT have been switched over to a pair of forward and inverse Walsh-Hadamard Transform (http://goo.gl/EIsfy), with proper scaling applied to match the range of the original 4x4 DCT/IDCT pair; 3. At Q 0, the second order remains to use the previous walsh-hadamard transform pair. However, to maintain the reversibility in second order transform at Q 0, scaling down is applied to first order DC coefficients prior to forward transform, and scaling up is applied to the second order output prior to quantization. Symmetric upscaling and downscaling are added around inverse second order transform; 4. At lossless mode, encoder also disables a number of minor features to ensure no loss is introduced, these features includes: a. Trellis quantization optimization b. Loop filtering c. Aggressive zero-binning, rounding and zero-bin boosting d. Mode based zero-bin boosting Lossless coding test was performed on all clips within the derf set, to verify that the commit has achieved lossless compression for all clips. The average compression ratio is around 2.57 to 1. (http://goo.gl/dEShs) Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
2012-06-14 04:03:31 +02:00
dest[c] = (unsigned char) a;
Add lossless compression mode. This commit adds lossless compression capability to the experimental branch. The lossless experiment can be enabled using --enable-lossless in configure. When the experiment is enabled, the encoder will use lossless compression mode by command line option --lossless, and the decoder automatically recognizes a losslessly encoded clip and decodes accordingly. To achieve the lossless coding, this commit has changed the following: 1. To encode at lossless mode, encoder forces the use of unit quantizer, i.e, Q 0, where effective quantization is 1. Encoder also disables the usage of 8x8 transform and allows only 4x4 transform; 2. At Q 0, the first order 4x4 DCT/IDCT have been switched over to a pair of forward and inverse Walsh-Hadamard Transform (http://goo.gl/EIsfy), with proper scaling applied to match the range of the original 4x4 DCT/IDCT pair; 3. At Q 0, the second order remains to use the previous walsh-hadamard transform pair. However, to maintain the reversibility in second order transform at Q 0, scaling down is applied to first order DC coefficients prior to forward transform, and scaling up is applied to the second order output prior to quantization. Symmetric upscaling and downscaling are added around inverse second order transform; 4. At lossless mode, encoder also disables a number of minor features to ensure no loss is introduced, these features includes: a. Trellis quantization optimization b. Loop filtering c. Aggressive zero-binning, rounding and zero-bin boosting d. Mode based zero-bin boosting Lossless coding test was performed on all clips within the derf set, to verify that the commit has achieved lossless compression for all clips. The average compression ratio is around 2.57 to 1. (http://goo.gl/dEShs) Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
2012-06-14 04:03:31 +02:00
}
dest += stride;
diff_ptr += 4;
pred += pitch;
}
Add lossless compression mode. This commit adds lossless compression capability to the experimental branch. The lossless experiment can be enabled using --enable-lossless in configure. When the experiment is enabled, the encoder will use lossless compression mode by command line option --lossless, and the decoder automatically recognizes a losslessly encoded clip and decodes accordingly. To achieve the lossless coding, this commit has changed the following: 1. To encode at lossless mode, encoder forces the use of unit quantizer, i.e, Q 0, where effective quantization is 1. Encoder also disables the usage of 8x8 transform and allows only 4x4 transform; 2. At Q 0, the first order 4x4 DCT/IDCT have been switched over to a pair of forward and inverse Walsh-Hadamard Transform (http://goo.gl/EIsfy), with proper scaling applied to match the range of the original 4x4 DCT/IDCT pair; 3. At Q 0, the second order remains to use the previous walsh-hadamard transform pair. However, to maintain the reversibility in second order transform at Q 0, scaling down is applied to first order DC coefficients prior to forward transform, and scaling up is applied to the second order output prior to quantization. Symmetric upscaling and downscaling are added around inverse second order transform; 4. At lossless mode, encoder also disables a number of minor features to ensure no loss is introduced, these features includes: a. Trellis quantization optimization b. Loop filtering c. Aggressive zero-binning, rounding and zero-bin boosting d. Mode based zero-bin boosting Lossless coding test was performed on all clips within the derf set, to verify that the commit has achieved lossless compression for all clips. The average compression ratio is around 2.57 to 1. (http://goo.gl/dEShs) Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
2012-06-14 04:03:31 +02:00
}
void vp8_dequant_dc_idct_add_lossless_c(short *input, short *dq, unsigned char *pred,
unsigned char *dest, int pitch, int stride,
int Dc) {
int i;
short output[16];
short *diff_ptr = output;
int r, c;
Add lossless compression mode. This commit adds lossless compression capability to the experimental branch. The lossless experiment can be enabled using --enable-lossless in configure. When the experiment is enabled, the encoder will use lossless compression mode by command line option --lossless, and the decoder automatically recognizes a losslessly encoded clip and decodes accordingly. To achieve the lossless coding, this commit has changed the following: 1. To encode at lossless mode, encoder forces the use of unit quantizer, i.e, Q 0, where effective quantization is 1. Encoder also disables the usage of 8x8 transform and allows only 4x4 transform; 2. At Q 0, the first order 4x4 DCT/IDCT have been switched over to a pair of forward and inverse Walsh-Hadamard Transform (http://goo.gl/EIsfy), with proper scaling applied to match the range of the original 4x4 DCT/IDCT pair; 3. At Q 0, the second order remains to use the previous walsh-hadamard transform pair. However, to maintain the reversibility in second order transform at Q 0, scaling down is applied to first order DC coefficients prior to forward transform, and scaling up is applied to the second order output prior to quantization. Symmetric upscaling and downscaling are added around inverse second order transform; 4. At lossless mode, encoder also disables a number of minor features to ensure no loss is introduced, these features includes: a. Trellis quantization optimization b. Loop filtering c. Aggressive zero-binning, rounding and zero-bin boosting d. Mode based zero-bin boosting Lossless coding test was performed on all clips within the derf set, to verify that the commit has achieved lossless compression for all clips. The average compression ratio is around 2.57 to 1. (http://goo.gl/dEShs) Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
2012-06-14 04:03:31 +02:00
input[0] = (short)Dc;
Add lossless compression mode. This commit adds lossless compression capability to the experimental branch. The lossless experiment can be enabled using --enable-lossless in configure. When the experiment is enabled, the encoder will use lossless compression mode by command line option --lossless, and the decoder automatically recognizes a losslessly encoded clip and decodes accordingly. To achieve the lossless coding, this commit has changed the following: 1. To encode at lossless mode, encoder forces the use of unit quantizer, i.e, Q 0, where effective quantization is 1. Encoder also disables the usage of 8x8 transform and allows only 4x4 transform; 2. At Q 0, the first order 4x4 DCT/IDCT have been switched over to a pair of forward and inverse Walsh-Hadamard Transform (http://goo.gl/EIsfy), with proper scaling applied to match the range of the original 4x4 DCT/IDCT pair; 3. At Q 0, the second order remains to use the previous walsh-hadamard transform pair. However, to maintain the reversibility in second order transform at Q 0, scaling down is applied to first order DC coefficients prior to forward transform, and scaling up is applied to the second order output prior to quantization. Symmetric upscaling and downscaling are added around inverse second order transform; 4. At lossless mode, encoder also disables a number of minor features to ensure no loss is introduced, these features includes: a. Trellis quantization optimization b. Loop filtering c. Aggressive zero-binning, rounding and zero-bin boosting d. Mode based zero-bin boosting Lossless coding test was performed on all clips within the derf set, to verify that the commit has achieved lossless compression for all clips. The average compression ratio is around 2.57 to 1. (http://goo.gl/dEShs) Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
2012-06-14 04:03:31 +02:00
for (i = 1; i < 16; i++) {
input[i] = dq[i] * input[i];
}
Add lossless compression mode. This commit adds lossless compression capability to the experimental branch. The lossless experiment can be enabled using --enable-lossless in configure. When the experiment is enabled, the encoder will use lossless compression mode by command line option --lossless, and the decoder automatically recognizes a losslessly encoded clip and decodes accordingly. To achieve the lossless coding, this commit has changed the following: 1. To encode at lossless mode, encoder forces the use of unit quantizer, i.e, Q 0, where effective quantization is 1. Encoder also disables the usage of 8x8 transform and allows only 4x4 transform; 2. At Q 0, the first order 4x4 DCT/IDCT have been switched over to a pair of forward and inverse Walsh-Hadamard Transform (http://goo.gl/EIsfy), with proper scaling applied to match the range of the original 4x4 DCT/IDCT pair; 3. At Q 0, the second order remains to use the previous walsh-hadamard transform pair. However, to maintain the reversibility in second order transform at Q 0, scaling down is applied to first order DC coefficients prior to forward transform, and scaling up is applied to the second order output prior to quantization. Symmetric upscaling and downscaling are added around inverse second order transform; 4. At lossless mode, encoder also disables a number of minor features to ensure no loss is introduced, these features includes: a. Trellis quantization optimization b. Loop filtering c. Aggressive zero-binning, rounding and zero-bin boosting d. Mode based zero-bin boosting Lossless coding test was performed on all clips within the derf set, to verify that the commit has achieved lossless compression for all clips. The average compression ratio is around 2.57 to 1. (http://goo.gl/dEShs) Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
2012-06-14 04:03:31 +02:00
vp8_short_inv_walsh4x4_x8_c(input, output, 4 << 1);
vpx_memset(input, 0, 32);
Add lossless compression mode. This commit adds lossless compression capability to the experimental branch. The lossless experiment can be enabled using --enable-lossless in configure. When the experiment is enabled, the encoder will use lossless compression mode by command line option --lossless, and the decoder automatically recognizes a losslessly encoded clip and decodes accordingly. To achieve the lossless coding, this commit has changed the following: 1. To encode at lossless mode, encoder forces the use of unit quantizer, i.e, Q 0, where effective quantization is 1. Encoder also disables the usage of 8x8 transform and allows only 4x4 transform; 2. At Q 0, the first order 4x4 DCT/IDCT have been switched over to a pair of forward and inverse Walsh-Hadamard Transform (http://goo.gl/EIsfy), with proper scaling applied to match the range of the original 4x4 DCT/IDCT pair; 3. At Q 0, the second order remains to use the previous walsh-hadamard transform pair. However, to maintain the reversibility in second order transform at Q 0, scaling down is applied to first order DC coefficients prior to forward transform, and scaling up is applied to the second order output prior to quantization. Symmetric upscaling and downscaling are added around inverse second order transform; 4. At lossless mode, encoder also disables a number of minor features to ensure no loss is introduced, these features includes: a. Trellis quantization optimization b. Loop filtering c. Aggressive zero-binning, rounding and zero-bin boosting d. Mode based zero-bin boosting Lossless coding test was performed on all clips within the derf set, to verify that the commit has achieved lossless compression for all clips. The average compression ratio is around 2.57 to 1. (http://goo.gl/dEShs) Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
2012-06-14 04:03:31 +02:00
for (r = 0; r < 4; r++) {
for (c = 0; c < 4; c++) {
int a = diff_ptr[c] + pred[c];
Add lossless compression mode. This commit adds lossless compression capability to the experimental branch. The lossless experiment can be enabled using --enable-lossless in configure. When the experiment is enabled, the encoder will use lossless compression mode by command line option --lossless, and the decoder automatically recognizes a losslessly encoded clip and decodes accordingly. To achieve the lossless coding, this commit has changed the following: 1. To encode at lossless mode, encoder forces the use of unit quantizer, i.e, Q 0, where effective quantization is 1. Encoder also disables the usage of 8x8 transform and allows only 4x4 transform; 2. At Q 0, the first order 4x4 DCT/IDCT have been switched over to a pair of forward and inverse Walsh-Hadamard Transform (http://goo.gl/EIsfy), with proper scaling applied to match the range of the original 4x4 DCT/IDCT pair; 3. At Q 0, the second order remains to use the previous walsh-hadamard transform pair. However, to maintain the reversibility in second order transform at Q 0, scaling down is applied to first order DC coefficients prior to forward transform, and scaling up is applied to the second order output prior to quantization. Symmetric upscaling and downscaling are added around inverse second order transform; 4. At lossless mode, encoder also disables a number of minor features to ensure no loss is introduced, these features includes: a. Trellis quantization optimization b. Loop filtering c. Aggressive zero-binning, rounding and zero-bin boosting d. Mode based zero-bin boosting Lossless coding test was performed on all clips within the derf set, to verify that the commit has achieved lossless compression for all clips. The average compression ratio is around 2.57 to 1. (http://goo.gl/dEShs) Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
2012-06-14 04:03:31 +02:00
if (a < 0)
a = 0;
Add lossless compression mode. This commit adds lossless compression capability to the experimental branch. The lossless experiment can be enabled using --enable-lossless in configure. When the experiment is enabled, the encoder will use lossless compression mode by command line option --lossless, and the decoder automatically recognizes a losslessly encoded clip and decodes accordingly. To achieve the lossless coding, this commit has changed the following: 1. To encode at lossless mode, encoder forces the use of unit quantizer, i.e, Q 0, where effective quantization is 1. Encoder also disables the usage of 8x8 transform and allows only 4x4 transform; 2. At Q 0, the first order 4x4 DCT/IDCT have been switched over to a pair of forward and inverse Walsh-Hadamard Transform (http://goo.gl/EIsfy), with proper scaling applied to match the range of the original 4x4 DCT/IDCT pair; 3. At Q 0, the second order remains to use the previous walsh-hadamard transform pair. However, to maintain the reversibility in second order transform at Q 0, scaling down is applied to first order DC coefficients prior to forward transform, and scaling up is applied to the second order output prior to quantization. Symmetric upscaling and downscaling are added around inverse second order transform; 4. At lossless mode, encoder also disables a number of minor features to ensure no loss is introduced, these features includes: a. Trellis quantization optimization b. Loop filtering c. Aggressive zero-binning, rounding and zero-bin boosting d. Mode based zero-bin boosting Lossless coding test was performed on all clips within the derf set, to verify that the commit has achieved lossless compression for all clips. The average compression ratio is around 2.57 to 1. (http://goo.gl/dEShs) Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
2012-06-14 04:03:31 +02:00
if (a > 255)
a = 255;
dest[c] = (unsigned char) a;
Add lossless compression mode. This commit adds lossless compression capability to the experimental branch. The lossless experiment can be enabled using --enable-lossless in configure. When the experiment is enabled, the encoder will use lossless compression mode by command line option --lossless, and the decoder automatically recognizes a losslessly encoded clip and decodes accordingly. To achieve the lossless coding, this commit has changed the following: 1. To encode at lossless mode, encoder forces the use of unit quantizer, i.e, Q 0, where effective quantization is 1. Encoder also disables the usage of 8x8 transform and allows only 4x4 transform; 2. At Q 0, the first order 4x4 DCT/IDCT have been switched over to a pair of forward and inverse Walsh-Hadamard Transform (http://goo.gl/EIsfy), with proper scaling applied to match the range of the original 4x4 DCT/IDCT pair; 3. At Q 0, the second order remains to use the previous walsh-hadamard transform pair. However, to maintain the reversibility in second order transform at Q 0, scaling down is applied to first order DC coefficients prior to forward transform, and scaling up is applied to the second order output prior to quantization. Symmetric upscaling and downscaling are added around inverse second order transform; 4. At lossless mode, encoder also disables a number of minor features to ensure no loss is introduced, these features includes: a. Trellis quantization optimization b. Loop filtering c. Aggressive zero-binning, rounding and zero-bin boosting d. Mode based zero-bin boosting Lossless coding test was performed on all clips within the derf set, to verify that the commit has achieved lossless compression for all clips. The average compression ratio is around 2.57 to 1. (http://goo.gl/dEShs) Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
2012-06-14 04:03:31 +02:00
}
dest += stride;
diff_ptr += 4;
pred += pitch;
}
Add lossless compression mode. This commit adds lossless compression capability to the experimental branch. The lossless experiment can be enabled using --enable-lossless in configure. When the experiment is enabled, the encoder will use lossless compression mode by command line option --lossless, and the decoder automatically recognizes a losslessly encoded clip and decodes accordingly. To achieve the lossless coding, this commit has changed the following: 1. To encode at lossless mode, encoder forces the use of unit quantizer, i.e, Q 0, where effective quantization is 1. Encoder also disables the usage of 8x8 transform and allows only 4x4 transform; 2. At Q 0, the first order 4x4 DCT/IDCT have been switched over to a pair of forward and inverse Walsh-Hadamard Transform (http://goo.gl/EIsfy), with proper scaling applied to match the range of the original 4x4 DCT/IDCT pair; 3. At Q 0, the second order remains to use the previous walsh-hadamard transform pair. However, to maintain the reversibility in second order transform at Q 0, scaling down is applied to first order DC coefficients prior to forward transform, and scaling up is applied to the second order output prior to quantization. Symmetric upscaling and downscaling are added around inverse second order transform; 4. At lossless mode, encoder also disables a number of minor features to ensure no loss is introduced, these features includes: a. Trellis quantization optimization b. Loop filtering c. Aggressive zero-binning, rounding and zero-bin boosting d. Mode based zero-bin boosting Lossless coding test was performed on all clips within the derf set, to verify that the commit has achieved lossless compression for all clips. The average compression ratio is around 2.57 to 1. (http://goo.gl/dEShs) Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
2012-06-14 04:03:31 +02:00
}
#endif
void vp8_dequantize_b_2x2_c(BLOCKD *d) {
int i;
short *DQ = d->dqcoeff;
short *Q = d->qcoeff;
short *DQC = d->dequant;
for (i = 0; i < 16; i++) {
DQ[i] = (short)((Q[i] * DQC[i]));
}
#ifdef DEC_DEBUG
if (dec_debug) {
int j;
printf("Dequantize 2x2\n");
for (j = 0; j < 16; j++) printf("%d ", Q[j]);
printf("\n");
for (j = 0; j < 16; j++) printf("%d ", DQ[j]);
printf("\n");
}
#endif
}
void vp8_dequant_idct_add_8x8_c(short *input, short *dq, unsigned char *pred,
unsigned char *dest, int pitch, int stride) { // , MACROBLOCKD *xd, short blk_idx
short output[64];
short *diff_ptr = output;
int r, c, b;
int i;
unsigned char *origdest = dest;
unsigned char *origpred = pred;
#ifdef DEC_DEBUG
if (dec_debug) {
int j;
printf("Input 8x8\n");
for (j = 0; j < 64; j++) {
printf("%d ", input[j]);
if (j % 8 == 7) printf("\n");
}
}
#endif
input[0] = input[0] * dq[0];
// recover quantizer for 4 4x4 blocks
for (i = 1; i < 64; i++) {
input[i] = input[i] * dq[1];
}
#ifdef DEC_DEBUG
if (dec_debug) {
int j;
printf("Input DQ 8x8\n");
for (j = 0; j < 64; j++) {
printf("%d ", input[j]);
if (j % 8 == 7) printf("\n");
}
}
#endif
// the idct halves ( >> 1) the pitch
vp8_short_idct8x8_c(input, output, 16);
#ifdef DEC_DEBUG
if (dec_debug) {
int j;
printf("Output 8x8\n");
for (j = 0; j < 64; j++) {
printf("%d ", output[j]);
if (j % 8 == 7) printf("\n");
}
}
#endif
vpx_memset(input, 0, 128);// test what should i put here
for (b = 0; b < 4; b++) {
for (r = 0; r < 4; r++) {
for (c = 0; c < 4; c++) {
int a = diff_ptr[c] + pred[c];
if (a < 0)
a = 0;
if (a > 255)
a = 255;
dest[c] = (unsigned char) a;
}
dest += stride;
diff_ptr += 8;
pred += pitch;
}
diff_ptr = output + (b + 1) / 2 * 4 * 8 + (b + 1) % 2 * 4;
dest = origdest + (b + 1) / 2 * 4 * stride + (b + 1) % 2 * 4;
pred = origpred + (b + 1) / 2 * 4 * pitch + (b + 1) % 2 * 4;
}
#ifdef DEC_DEBUG
if (dec_debug) {
int k, j;
printf("Final 8x8\n");
for (j = 0; j < 8; j++) {
for (k = 0; k < 8; k++) {
printf("%d ", origdest[k]);
}
printf("\n");
origdest += stride;
}
}
#endif
}
void vp8_dequant_dc_idct_add_8x8_c(short *input, short *dq, unsigned char *pred,
unsigned char *dest, int pitch, int stride,
int Dc) { // Dc for 1st order T in some rear case
short output[64];
short *diff_ptr = output;
int r, c, b;
int i;
unsigned char *origdest = dest;
unsigned char *origpred = pred;
input[0] = (short)Dc;// Dc is the reconstructed value, do not need dequantization
// dc value is recovered after dequantization, since dc need not quantization
#ifdef DEC_DEBUG
if (dec_debug) {
int j;
printf("Input 8x8\n");
for (j = 0; j < 64; j++) {
printf("%d ", input[j]);
if (j % 8 == 7) printf("\n");
}
}
#endif
for (i = 1; i < 64; i++) {
input[i] = input[i] * dq[1];
}
#ifdef DEC_DEBUG
if (dec_debug) {
int j;
printf("Input DQ 8x8\n");
for (j = 0; j < 64; j++) {
printf("%d ", input[j]);
if (j % 8 == 7) printf("\n");
}
}
#endif
// the idct halves ( >> 1) the pitch
vp8_short_idct8x8_c(input, output, 16);
#ifdef DEC_DEBUG
if (dec_debug) {
int j;
printf("Output 8x8\n");
for (j = 0; j < 64; j++) {
printf("%d ", output[j]);
if (j % 8 == 7) printf("\n");
}
}
#endif
vpx_memset(input, 0, 128);
for (b = 0; b < 4; b++) {
for (r = 0; r < 4; r++) {
for (c = 0; c < 4; c++) {
int a = diff_ptr[c] + pred[c];
if (a < 0)
a = 0;
if (a > 255)
a = 255;
dest[c] = (unsigned char) a;
}
dest += stride;
diff_ptr += 8;
pred += pitch;
}
diff_ptr = output + (b + 1) / 2 * 4 * 8 + (b + 1) % 2 * 4;
dest = origdest + (b + 1) / 2 * 4 * stride + (b + 1) % 2 * 4;
pred = origpred + (b + 1) / 2 * 4 * pitch + (b + 1) % 2 * 4;
}
#ifdef DEC_DEBUG
if (dec_debug) {
int k, j;
printf("Final 8x8\n");
for (j = 0; j < 8; j++) {
for (k = 0; k < 8; k++) {
printf("%d ", origdest[k]);
}
printf("\n");
origdest += stride;
}
}
#endif
}
void vp8_ht_dequant_idct_add_16x16_c(TX_TYPE tx_type, short *input, short *dq,
unsigned char *pred, unsigned char *dest,
int pitch, int stride) {
short output[256];
short *diff_ptr = output;
int r, c, i;
input[0]= input[0] * dq[0];
// recover quantizer for 4 4x4 blocks
for (i = 1; i < 256; i++)
input[i] = input[i] * dq[1];
// inverse hybrid transform
vp8_ihtllm_c(input, output, 32, tx_type, 16);
// the idct halves ( >> 1) the pitch
// vp8_short_idct16x16_c(input, output, 32);
vpx_memset(input, 0, 512);
for (r = 0; r < 16; r++) {
for (c = 0; c < 16; c++) {
int a = diff_ptr[c] + pred[c];
if (a < 0)
a = 0;
else if (a > 255)
a = 255;
dest[c] = (unsigned char) a;
}
dest += stride;
diff_ptr += 16;
pred += pitch;
}
}
void vp8_dequant_idct_add_16x16_c(short *input, short *dq, unsigned char *pred,
unsigned char *dest, int pitch, int stride) {
short output[256];
short *diff_ptr = output;
int r, c, i;
input[0]= input[0] * dq[0];
// recover quantizer for 4 4x4 blocks
for (i = 1; i < 256; i++)
input[i] = input[i] * dq[1];
// the idct halves ( >> 1) the pitch
vp8_short_idct16x16_c(input, output, 32);
vpx_memset(input, 0, 512);
for (r = 0; r < 16; r++) {
for (c = 0; c < 16; c++) {
int a = diff_ptr[c] + pred[c];
if (a < 0)
a = 0;
else if (a > 255)
a = 255;
dest[c] = (unsigned char) a;
}
dest += stride;
diff_ptr += 16;
pred += pitch;
}
}