generic-library/vpx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9bf3bc9a72
vpx/vp8/decoder/onyxd_if.c

614 lines
16 KiB
C
Raw Normal View History

Initial WebM release
2010-05-18 17:58:33 +02:00
/*
Use WebM in copyright notice for consistency Changes 'The VP8 project' to 'The WebM project', for consistency with other webmproject.org repositories. Fixes issue #97. Change-Id: I37c13ed5fbdb9d334ceef71c6350e9febed9bbba
2010-09-09 14:16:39 +02:00
* Copyright (c) 2010 The WebM project authors. All Rights Reserved.
Initial WebM release
2010-05-18 17:58:33 +02:00
*
cosmetics: trim trailing whitespace When the license headers were updated, they accidentally contained trailing whitespace, so unfortunately we have to touch all the files again. Change-Id: I236c05fade06589e417179c0444cb39b09e4200d
2010-06-18 18:39:21 +02:00
* Use of this source code is governed by a BSD-style license
LICENSE: update with latest text Change-Id: Ieebea089095d9073b3a94932791099f614ce120c
2010-06-04 22:19:40 +02:00
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
cosmetics: trim trailing whitespace When the license headers were updated, they accidentally contained trailing whitespace, so unfortunately we have to touch all the files again. Change-Id: I236c05fade06589e417179c0444cb39b09e4200d
2010-06-18 18:39:21 +02:00
* in the file PATENTS. All contributing project authors may
LICENSE: update with latest text Change-Id: Ieebea089095d9073b3a94932791099f614ce120c
2010-06-04 22:19:40 +02:00
* be found in the AUTHORS file in the root of the source tree.
Initial WebM release
2010-05-18 17:58:33 +02:00
*/
Fix relative include paths Allow compiling without adding vp8/{common,encoder,decoder} to the include paths. Change-Id: Ifeb5dac351cdfadcd659736f5158b315a0030b6c
2011-02-10 20:41:38 +01:00
#include "vp8/common/onyxc_int.h"
Initial WebM release
2010-05-18 17:58:33 +02:00
#if CONFIG_POSTPROC
Fix relative include paths Allow compiling without adding vp8/{common,encoder,decoder} to the include paths. Change-Id: Ifeb5dac351cdfadcd659736f5158b315a0030b6c
2011-02-10 20:41:38 +01:00
#include "vp8/common/postproc.h"
Initial WebM release
2010-05-18 17:58:33 +02:00
#endif
Fix relative include paths Allow compiling without adding vp8/{common,encoder,decoder} to the include paths. Change-Id: Ifeb5dac351cdfadcd659736f5158b315a0030b6c
2011-02-10 20:41:38 +01:00
#include "vp8/common/onyxd.h"
Initial WebM release
2010-05-18 17:58:33 +02:00
#include "onyxd_int.h"
#include "vpx_mem/vpx_mem.h"
Fix relative include paths Allow compiling without adding vp8/{common,encoder,decoder} to the include paths. Change-Id: Ifeb5dac351cdfadcd659736f5158b315a0030b6c
2011-02-10 20:41:38 +01:00
#include "vp8/common/alloccommon.h"
Initial WebM release
2010-05-18 17:58:33 +02:00
#include "vpx_scale/yv12extend.h"
Fix relative include paths Allow compiling without adding vp8/{common,encoder,decoder} to the include paths. Change-Id: Ifeb5dac351cdfadcd659736f5158b315a0030b6c
2011-02-10 20:41:38 +01:00
#include "vp8/common/loopfilter.h"
#include "vp8/common/swapyv12buffer.h"
#include "vp8/common/g_common.h"
#include "vp8/common/threading.h"
Initial WebM release
2010-05-18 17:58:33 +02:00
#include "decoderthreading.h"
#include <stdio.h>
Bugfix in vp8dx_set_reference The fb_idx_ref_cnt book-keeping was in error. Added an assert to prevent future errors in the reference count vector. Also fixed a pointer syntax error. Change-Id: I563081090c78702d82199e407df4ecc93da6f349
2011-06-01 21:41:12 +02:00
#include <assert.h>
Moved gf_active code to encoder only The gf_active code is only used by the encoder, so it was moved from common and decoder. Change-Id: Iada15acd5b2b33ff70c34668ca87d4cfd0d05025
2010-08-11 17:02:31 +02:00
Fix relative include paths Allow compiling without adding vp8/{common,encoder,decoder} to the include paths. Change-Id: Ifeb5dac351cdfadcd659736f5158b315a0030b6c
2011-02-10 20:41:38 +01:00
#include "vp8/common/quant_common.h"
Initial WebM release
2010-05-18 17:58:33 +02:00
#include "vpx_scale/vpxscale.h"
Fix relative include paths Allow compiling without adding vp8/{common,encoder,decoder} to the include paths. Change-Id: Ifeb5dac351cdfadcd659736f5158b315a0030b6c
2011-02-10 20:41:38 +01:00
#include "vp8/common/systemdependent.h"
Initial WebM release
2010-05-18 17:58:33 +02:00
#include "vpx_ports/vpx_timer.h"
framework for assembly version of the detokenizer adds a compile time option: --enable-arm-asm-detok which pulls in vp8/decoder/arm/detokenize.asm currently about break even speed wise, but changes are pending to the fill code (branch and load 3 bytes versus conditionally always load one) and the error handling. Currently it doesn't handle zero runs or overrunning the buffer. this is really just so i don't have to rebase my changes all the time to run benchmarks - now just need to replace one file! Change-Id: I56d0e2354dc0ca3811bffd0e88fe1f952fa6c797
2010-08-12 15:05:37 +02:00
#include "detokenize.h"
Adding error-concealment to the decoder. The error-concealer is plugged in after any motion vectors have been decoded. It tries to estimate any missing motion vectors from the motion vectors of the previous frame. Intra blocks with missing residual are replaced with inter blocks with estimated motion vectors. This feature was developed in a separate sandbox (sandbox/holmer/error-concealment). Change-Id: I5c8917b031078d79dbafd90f6006680e84a23412
2011-05-02 15:30:51 +02:00
#if CONFIG_ERROR_CONCEALMENT
#include "error_concealment.h"
#endif
Add runtime CPU detection support for ARM. The primary goal is to allow a binary to be built which supports NEON, but can fall back to non-NEON routines, since some Android devices do not have NEON, even if they are otherwise ARMv7 (e.g., Tegra). The configure-generated flags HAVE_ARMV7, etc., are used to decide which versions of each function to build, and when CONFIG_RUNTIME_CPU_DETECT is enabled, the correct version is chosen at run time. In order for this to work, the CFLAGS must be set to something appropriate (e.g., without -mfpu=neon for ARMv7, and with appropriate -march and -mcpu for even earlier configurations), or the native C code will not be able to run. The ASFLAGS must remain set for the most advanced instruction set required at build time, since the ARM assembler will refuse to emit them otherwise. I have not attempted to make any changes to configure to do this automatically. Doing so will probably require the addition of new configure options. Many of the hooks for RTCD on ARM were already there, but a lot of the code had bit-rotted, and a good deal of the ARM-specific code is not integrated into the RTCD structs at all. I did not try to resolve the latter, merely to add the minimal amount of protection around them to allow RTCD to work. Those functions that were called based on an ifdef at the calling site were expanded to check the RTCD flags at that site, but they should be added to an RTCD struct somewhere in the future. The functions invoked with global function pointers still are, but these should be moved into an RTCD struct for thread safety (I believe every platform currently supported has atomic pointer stores, but this is not guaranteed). The encoder's boolhuff functions did not even have _c and armv7 suffixes, and the correct version was resolved at link time. The token packing functions did have appropriate suffixes, but the version was selected with a define, with no associated RTCD struct. However, for both of these, the only armv7 instruction they actually used was rbit, and this was completely superfluous, so I reworked them to avoid it. The only non-ARMv4 instruction remaining in them is clz, which is ARMv5 (not even ARMv5TE is required). Considering that there are no ARM-specific configs which are not at least ARMv5TE, I did not try to detect these at runtime, and simply enable them for ARMv5 and above. Finally, the NEON register saving code was completely non-reentrant, since it saved the registers to a global, static variable. I moved the storage for this onto the stack. A single binary built with this code was tested on an ARM11 (ARMv6) and a Cortex A8 (ARMv7 w/NEON), for both the encoder and decoder, and produced identical output, while using the correct accelerated functions on each. I did not test on any earlier processors. Change-Id: I45cbd63a614f4554c3b325c45d46c0806f009eaa
2010-10-21 00:39:11 +02:00
#if ARCH_ARM
#include "vpx_ports/arm.h"
#endif
Initial WebM release
2010-05-18 17:58:33 +02:00
extern void vp8_init_loop_filter(VP8_COMMON *cm);
extern void vp8cx_init_de_quantizer(VP8D_COMP *pbi);
Fixing bug in VP8_SET_REFERENCE decoder control command In vp8dx_set_reference, the new reference image is written to an unused reference frame buffer. Change-Id: I9e4f2cef5a011094bb7ce7b2719cbfe096a773e8
2011-05-23 13:47:33 +02:00
static int get_free_fb (VP8_COMMON *cm);
static void ref_cnt_fb (int *buf, int *idx, int new_idx);
Initial WebM release
2010-05-18 17:58:33 +02:00
void vp8dx_initialize()
{
static int init_done = 0;
if (!init_done)
{
vp8_initialize_common();
vp8_scale_machine_specific_config();
init_done = 1;
}
}
VP8D_PTR vp8dx_create_decompressor(VP8D_CONFIG *oxcf)
{
VP8D_COMP *pbi = vpx_memalign(32, sizeof(VP8D_COMP));
if (!pbi)
return NULL;
vpx_memset(pbi, 0, sizeof(VP8D_COMP));
if (setjmp(pbi->common.error.jmp))
{
pbi->common.error.setjmp = 0;
vp8dx_remove_decompressor(pbi);
return 0;
}
pbi->common.error.setjmp = 1;
vp8dx_initialize();
vp8_create_common(&pbi->common);
vp8_dmachine_specific_config(pbi);
pbi->common.current_video_frame = 0;
pbi->ready_for_new_data = 1;
Put more code under #if CONFIG_MULTITHREAD. Change-Id: Icf4b692099d7d249fe3553852b1022b027b28e4b
2011-02-05 06:29:25 +01:00
#if CONFIG_MULTITHREAD
Initial WebM release
2010-05-18 17:58:33 +02:00
pbi->max_threads = oxcf->max_threads;
vp8_decoder_create_threads(pbi);
Put more code under #if CONFIG_MULTITHREAD. Change-Id: Icf4b692099d7d249fe3553852b1022b027b28e4b
2011-02-05 06:29:25 +01:00
#endif
Initial WebM release
2010-05-18 17:58:33 +02:00
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-28 01:04:02 +02:00
/* vp8cx_init_de_quantizer() is first called here. Add check in frame_init_dequantizer() to avoid
* unnecessary calling of vp8cx_init_de_quantizer() for every frame.
*/
Initial WebM release
2010-05-18 17:58:33 +02:00
vp8cx_init_de_quantizer(pbi);
fix sharpness bug and clean up sharpness was not recalculated in vp8cx_pick_filter_level_fast remove last_filter_type. all values are calculated, don't need to update the lfi data when it changes. always use cm->sharpness_level. the extra indirection was annoying. don't track last frame_type or sharpness_level manually. frame type only matters for motion search and sharpness_level is taken care of in frame_init move function declarations to their proper header Change-Id: I7ef037bd4bf8cf5e37d2d36bd03b5e22a2ad91db
2011-07-20 21:53:42 +02:00
vp8_loop_filter_init(&pbi->common);
Initial WebM release
2010-05-18 17:58:33 +02:00
pbi->common.error.setjmp = 0;
Adding error-concealment to the decoder. The error-concealer is plugged in after any motion vectors have been decoded. It tries to estimate any missing motion vectors from the motion vectors of the previous frame. Intra blocks with missing residual are replaced with inter blocks with estimated motion vectors. This feature was developed in a separate sandbox (sandbox/holmer/error-concealment). Change-Id: I5c8917b031078d79dbafd90f6006680e84a23412
2011-05-02 15:30:51 +02:00
#if CONFIG_ERROR_CONCEALMENT
pbi->ec_enabled = oxcf->error_concealment;
#else
pbi->ec_enabled = 0;
#endif
Disable error concealment until first key frame is decoded When error concealment is enabled the first key frame must be successfully received before error concealment is activated. Error concealment will be activated when the delta following delta frame is received. Also fixed a couple of bugs related to error tracking in multi-threading. And avoiding decoding corrupt residual when we have multiple non-resilient partitions. Change-Id: I45c4bb296e2f05f57624aef500a874faf431a60d
2011-08-08 10:56:20 +02:00
/* Error concealment is activated after a key frame has been
* decoded without errors when error concealment is enabled.
*/
pbi->ec_active = 0;
pbi->decoded_key_frame = 0;
Adding error-concealment to the decoder. The error-concealer is plugged in after any motion vectors have been decoded. It tries to estimate any missing motion vectors from the motion vectors of the previous frame. Intra blocks with missing residual are replaced with inter blocks with estimated motion vectors. This feature was developed in a separate sandbox (sandbox/holmer/error-concealment). Change-Id: I5c8917b031078d79dbafd90f6006680e84a23412
2011-05-02 15:30:51 +02:00
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
pbi->input_partition = oxcf->input_partition;
Disable error concealment until first key frame is decoded When error concealment is enabled the first key frame must be successfully received before error concealment is activated. Error concealment will be activated when the delta following delta frame is received. Also fixed a couple of bugs related to error tracking in multi-threading. And avoiding decoding corrupt residual when we have multiple non-resilient partitions. Change-Id: I45c4bb296e2f05f57624aef500a874faf431a60d
2011-08-08 10:56:20 +02:00
/* Independent partitions is activated when a frame updates the
* token probability table to have equal probabilities over the
* PREV_COEF context.
*/
pbi->independent_partitions = 0;
Initial WebM release
2010-05-18 17:58:33 +02:00
return (VP8D_PTR) pbi;
}
void vp8dx_remove_decompressor(VP8D_PTR ptr)
{
VP8D_COMP *pbi = (VP8D_COMP *) ptr;
if (!pbi)
return;
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 20:08:52 +02:00
#if CONFIG_MULTITHREAD
if (pbi->b_multithreaded_rd)
vp8mt_de_alloc_temp_buffers(pbi, pbi->common.mb_rows);
Initial WebM release
2010-05-18 17:58:33 +02:00
vp8_decoder_remove_threads(pbi);
Adding error-concealment to the decoder. The error-concealer is plugged in after any motion vectors have been decoded. It tries to estimate any missing motion vectors from the motion vectors of the previous frame. Intra blocks with missing residual are replaced with inter blocks with estimated motion vectors. This feature was developed in a separate sandbox (sandbox/holmer/error-concealment). Change-Id: I5c8917b031078d79dbafd90f6006680e84a23412
2011-05-02 15:30:51 +02:00
#endif
#if CONFIG_ERROR_CONCEALMENT
vp8_de_alloc_overlap_lists(pbi);
Put more code under #if CONFIG_MULTITHREAD. Change-Id: Icf4b692099d7d249fe3553852b1022b027b28e4b
2011-02-05 06:29:25 +01:00
#endif
Initial WebM release
2010-05-18 17:58:33 +02:00
vp8_remove_common(&pbi->common);
fix corrupt frame leak If setup_token_decoder reported an internal error the memory allocated there would not be freed in the resulting call to _remove_decompressor. Change-Id: Ib459de222d76b1910d6f449cdcd01663447dbdf6
2011-06-14 02:29:49 +02:00
vpx_free(pbi->mbc);
Initial WebM release
2010-05-18 17:58:33 +02:00
vpx_free(pbi);
}
get/set reference buffer dimension check added vp8_yv12_copy_frame_ptr() expects same size buffers which was not previously gaurenteed. Using an improperly allocated buffer would cause a crash before. Change-Id: I904982313ce9352474f80de842013dcd89f48685
2011-06-22 18:41:17 +02:00
vpx_codec_err_t vp8dx_get_reference(VP8D_PTR ptr, VP8_REFFRAME ref_frame_flag, YV12_BUFFER_CONFIG *sd)
Initial WebM release
2010-05-18 17:58:33 +02:00
{
VP8D_COMP *pbi = (VP8D_COMP *) ptr;
VP8_COMMON *cm = &pbi->common;
Swap alt/gold/new/last frame buffer ptrs instead of copying. At the end of the decode, frame buffers were being copied. The frames are not updated after the copy, they are just for reference on later frames. This change allows multiple references to the same frame buffer instead of copying it. Changes needed to be made to the encoder to handle this. The encoder is still doing frame buffer copies in similar places where pointer reference could be done. Change-Id: I7c38be4d23979cc49b5f17241ca3a78703803e66
2010-07-22 14:07:32 +02:00
int ref_fb_idx;
Initial WebM release
2010-05-18 17:58:33 +02:00
if (ref_frame_flag == VP8_LAST_FLAG)
Swap alt/gold/new/last frame buffer ptrs instead of copying. At the end of the decode, frame buffers were being copied. The frames are not updated after the copy, they are just for reference on later frames. This change allows multiple references to the same frame buffer instead of copying it. Changes needed to be made to the encoder to handle this. The encoder is still doing frame buffer copies in similar places where pointer reference could be done. Change-Id: I7c38be4d23979cc49b5f17241ca3a78703803e66
2010-07-22 14:07:32 +02:00
ref_fb_idx = cm->lst_fb_idx;
Initial WebM release
2010-05-18 17:58:33 +02:00
else if (ref_frame_flag == VP8_GOLD_FLAG)
Swap alt/gold/new/last frame buffer ptrs instead of copying. At the end of the decode, frame buffers were being copied. The frames are not updated after the copy, they are just for reference on later frames. This change allows multiple references to the same frame buffer instead of copying it. Changes needed to be made to the encoder to handle this. The encoder is still doing frame buffer copies in similar places where pointer reference could be done. Change-Id: I7c38be4d23979cc49b5f17241ca3a78703803e66
2010-07-22 14:07:32 +02:00
ref_fb_idx = cm->gld_fb_idx;
Initial WebM release
2010-05-18 17:58:33 +02:00
else if (ref_frame_flag == VP8_ALT_FLAG)
Swap alt/gold/new/last frame buffer ptrs instead of copying. At the end of the decode, frame buffers were being copied. The frames are not updated after the copy, they are just for reference on later frames. This change allows multiple references to the same frame buffer instead of copying it. Changes needed to be made to the encoder to handle this. The encoder is still doing frame buffer copies in similar places where pointer reference could be done. Change-Id: I7c38be4d23979cc49b5f17241ca3a78703803e66
2010-07-22 14:07:32 +02:00
ref_fb_idx = cm->alt_fb_idx;
get/set reference buffer dimension check added vp8_yv12_copy_frame_ptr() expects same size buffers which was not previously gaurenteed. Using an improperly allocated buffer would cause a crash before. Change-Id: I904982313ce9352474f80de842013dcd89f48685
2011-06-22 18:41:17 +02:00
else{
vpx_internal_error(&pbi->common.error, VPX_CODEC_ERROR,
"Invalid reference frame");
return pbi->common.error.error_code;
}
Initial WebM release
2010-05-18 17:58:33 +02:00
get/set reference buffer dimension check added vp8_yv12_copy_frame_ptr() expects same size buffers which was not previously gaurenteed. Using an improperly allocated buffer would cause a crash before. Change-Id: I904982313ce9352474f80de842013dcd89f48685
2011-06-22 18:41:17 +02:00
if(cm->yv12_fb[ref_fb_idx].y_height != sd->y_height ||
cm->yv12_fb[ref_fb_idx].y_width != sd->y_width ||
cm->yv12_fb[ref_fb_idx].uv_height != sd->uv_height ||
cm->yv12_fb[ref_fb_idx].uv_width != sd->uv_width){
vpx_internal_error(&pbi->common.error, VPX_CODEC_ERROR,
"Incorrect buffer dimensions");
}
else
vp8_yv12_copy_frame_ptr(&cm->yv12_fb[ref_fb_idx], sd);
Swap alt/gold/new/last frame buffer ptrs instead of copying. At the end of the decode, frame buffers were being copied. The frames are not updated after the copy, they are just for reference on later frames. This change allows multiple references to the same frame buffer instead of copying it. Changes needed to be made to the encoder to handle this. The encoder is still doing frame buffer copies in similar places where pointer reference could be done. Change-Id: I7c38be4d23979cc49b5f17241ca3a78703803e66
2010-07-22 14:07:32 +02:00
get/set reference buffer dimension check added vp8_yv12_copy_frame_ptr() expects same size buffers which was not previously gaurenteed. Using an improperly allocated buffer would cause a crash before. Change-Id: I904982313ce9352474f80de842013dcd89f48685
2011-06-22 18:41:17 +02:00
return pbi->common.error.error_code;
Initial WebM release
2010-05-18 17:58:33 +02:00
}
Increase static linkage, remove unused functions A large number of functions were defined with external linkage, even though they were only used from within one file. This patch changes their linkage to static and removes the vp8_ prefix from their names, which should make it more obvious to the reader that the function is contained within the current translation unit. Functions that were not referenced were removed. These symbols were identified by: $ nm -A libvpx.a | sort -k3 | uniq -c -f2 | grep ' [A-Z] ' \ | sort | grep '^ *1 ' Change-Id: I59609f58ab65312012c047036ae1e0634f795779
2011-03-17 22:07:59 +01:00
get/set reference buffer dimension check added vp8_yv12_copy_frame_ptr() expects same size buffers which was not previously gaurenteed. Using an improperly allocated buffer would cause a crash before. Change-Id: I904982313ce9352474f80de842013dcd89f48685
2011-06-22 18:41:17 +02:00
vpx_codec_err_t vp8dx_set_reference(VP8D_PTR ptr, VP8_REFFRAME ref_frame_flag, YV12_BUFFER_CONFIG *sd)
Initial WebM release
2010-05-18 17:58:33 +02:00
{
VP8D_COMP *pbi = (VP8D_COMP *) ptr;
VP8_COMMON *cm = &pbi->common;
Fixing bug in VP8_SET_REFERENCE decoder control command In vp8dx_set_reference, the new reference image is written to an unused reference frame buffer. Change-Id: I9e4f2cef5a011094bb7ce7b2719cbfe096a773e8
2011-05-23 13:47:33 +02:00
int *ref_fb_ptr = NULL;
int free_fb;
Initial WebM release
2010-05-18 17:58:33 +02:00
if (ref_frame_flag == VP8_LAST_FLAG)
Bugfix in vp8dx_set_reference The fb_idx_ref_cnt book-keeping was in error. Added an assert to prevent future errors in the reference count vector. Also fixed a pointer syntax error. Change-Id: I563081090c78702d82199e407df4ecc93da6f349
2011-06-01 21:41:12 +02:00
ref_fb_ptr = &cm->lst_fb_idx;
Initial WebM release
2010-05-18 17:58:33 +02:00
else if (ref_frame_flag == VP8_GOLD_FLAG)
Bugfix in vp8dx_set_reference The fb_idx_ref_cnt book-keeping was in error. Added an assert to prevent future errors in the reference count vector. Also fixed a pointer syntax error. Change-Id: I563081090c78702d82199e407df4ecc93da6f349
2011-06-01 21:41:12 +02:00
ref_fb_ptr = &cm->gld_fb_idx;
Initial WebM release
2010-05-18 17:58:33 +02:00
else if (ref_frame_flag == VP8_ALT_FLAG)
Bugfix in vp8dx_set_reference The fb_idx_ref_cnt book-keeping was in error. Added an assert to prevent future errors in the reference count vector. Also fixed a pointer syntax error. Change-Id: I563081090c78702d82199e407df4ecc93da6f349
2011-06-01 21:41:12 +02:00
ref_fb_ptr = &cm->alt_fb_idx;
get/set reference buffer dimension check added vp8_yv12_copy_frame_ptr() expects same size buffers which was not previously gaurenteed. Using an improperly allocated buffer would cause a crash before. Change-Id: I904982313ce9352474f80de842013dcd89f48685
2011-06-22 18:41:17 +02:00
else{
vpx_internal_error(&pbi->common.error, VPX_CODEC_ERROR,
"Invalid reference frame");
return pbi->common.error.error_code;
}
Fixing bug in VP8_SET_REFERENCE decoder control command In vp8dx_set_reference, the new reference image is written to an unused reference frame buffer. Change-Id: I9e4f2cef5a011094bb7ce7b2719cbfe096a773e8
2011-05-23 13:47:33 +02:00
get/set reference buffer dimension check added vp8_yv12_copy_frame_ptr() expects same size buffers which was not previously gaurenteed. Using an improperly allocated buffer would cause a crash before. Change-Id: I904982313ce9352474f80de842013dcd89f48685
2011-06-22 18:41:17 +02:00
if(cm->yv12_fb[*ref_fb_ptr].y_height != sd->y_height ||
cm->yv12_fb[*ref_fb_ptr].y_width != sd->y_width ||
cm->yv12_fb[*ref_fb_ptr].uv_height != sd->uv_height ||
cm->yv12_fb[*ref_fb_ptr].uv_width != sd->uv_width){
vpx_internal_error(&pbi->common.error, VPX_CODEC_ERROR,
"Incorrect buffer dimensions");
}
else{
/* Find an empty frame buffer. */
free_fb = get_free_fb(cm);
/* Decrease fb_idx_ref_cnt since it will be increased again in
* ref_cnt_fb() below. */
cm->fb_idx_ref_cnt[free_fb]--;
/* Manage the reference counters and copy image. */
ref_cnt_fb (cm->fb_idx_ref_cnt, ref_fb_ptr, free_fb);
vp8_yv12_copy_frame_ptr(sd, &cm->yv12_fb[*ref_fb_ptr]);
}
Swap alt/gold/new/last frame buffer ptrs instead of copying. At the end of the decode, frame buffers were being copied. The frames are not updated after the copy, they are just for reference on later frames. This change allows multiple references to the same frame buffer instead of copying it. Changes needed to be made to the encoder to handle this. The encoder is still doing frame buffer copies in similar places where pointer reference could be done. Change-Id: I7c38be4d23979cc49b5f17241ca3a78703803e66
2010-07-22 14:07:32 +02:00
get/set reference buffer dimension check added vp8_yv12_copy_frame_ptr() expects same size buffers which was not previously gaurenteed. Using an improperly allocated buffer would cause a crash before. Change-Id: I904982313ce9352474f80de842013dcd89f48685
2011-06-22 18:41:17 +02:00
return pbi->common.error.error_code;
Initial WebM release
2010-05-18 17:58:33 +02:00
}
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-28 01:04:02 +02:00
/*For ARM NEON, d8-d15 are callee-saved registers, and need to be saved by us.*/
Initial WebM release
2010-05-18 17:58:33 +02:00
#if HAVE_ARMV7
cosmetics: consistently use [u]int64_t Removes mixed usage of (unsigned) long long and INT64. Fixes Issue #208. Change-Id: I220d3ed5ce4bb1280cd38bb3715f208ce23cf83a
2011-07-26 03:44:59 +02:00
extern void vp8_push_neon(int64_t *store);
extern void vp8_pop_neon(int64_t *store);
Initial WebM release
2010-05-18 17:58:33 +02:00
#endif
Swap alt/gold/new/last frame buffer ptrs instead of copying. At the end of the decode, frame buffers were being copied. The frames are not updated after the copy, they are just for reference on later frames. This change allows multiple references to the same frame buffer instead of copying it. Changes needed to be made to the encoder to handle this. The encoder is still doing frame buffer copies in similar places where pointer reference could be done. Change-Id: I7c38be4d23979cc49b5f17241ca3a78703803e66
2010-07-22 14:07:32 +02:00
static int get_free_fb (VP8_COMMON *cm)
{
int i;
for (i = 0; i < NUM_YV12_BUFFERS; i++)
if (cm->fb_idx_ref_cnt[i] == 0)
break;
Bugfix in vp8dx_set_reference The fb_idx_ref_cnt book-keeping was in error. Added an assert to prevent future errors in the reference count vector. Also fixed a pointer syntax error. Change-Id: I563081090c78702d82199e407df4ecc93da6f349
2011-06-01 21:41:12 +02:00
assert(i < NUM_YV12_BUFFERS);
Swap alt/gold/new/last frame buffer ptrs instead of copying. At the end of the decode, frame buffers were being copied. The frames are not updated after the copy, they are just for reference on later frames. This change allows multiple references to the same frame buffer instead of copying it. Changes needed to be made to the encoder to handle this. The encoder is still doing frame buffer copies in similar places where pointer reference could be done. Change-Id: I7c38be4d23979cc49b5f17241ca3a78703803e66
2010-07-22 14:07:32 +02:00
cm->fb_idx_ref_cnt[i] = 1;
return i;
}
static void ref_cnt_fb (int *buf, int *idx, int new_idx)
{
if (buf[*idx] > 0)
buf[*idx]--;
*idx = new_idx;
buf[new_idx]++;
}
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-28 01:04:02 +02:00
/* If any buffer copy / swapping is signalled it should be done here. */
Swap alt/gold/new/last frame buffer ptrs instead of copying. At the end of the decode, frame buffers were being copied. The frames are not updated after the copy, they are just for reference on later frames. This change allows multiple references to the same frame buffer instead of copying it. Changes needed to be made to the encoder to handle this. The encoder is still doing frame buffer copies in similar places where pointer reference could be done. Change-Id: I7c38be4d23979cc49b5f17241ca3a78703803e66
2010-07-22 14:07:32 +02:00
static int swap_frame_buffers (VP8_COMMON *cm)
{
fix last frame buffer copy logic regression Commit 0ce3901 introduced a change in the frame buffer copy logic where the NEW frame could be copied to the ARF or GF buffer through the copy_buffer_to_{arf,gf}==1 flags, if the LAST frame was not being refreshed. This is not correct. The intent of the copy_buffer_to_{arf,gf}==1 flag is to copy the LAST buffer. To copy the NEW buffer, the refresh_{alt_ref,golden}_frame flag should be used. The original buffer copy logic is fairly convoluted. For example: if (cm->refresh_last_frame) { vp8_swap_yv12_buffer(&cm->last_frame, &cm->new_frame); cm->frame_to_show = &cm->last_frame; } else { cm->frame_to_show = &cm->new_frame; } ... if (cm->copy_buffer_to_arf) { if (cm->copy_buffer_to_arf == 1) { if (cm->refresh_last_frame) vp8_yv12_copy_frame_ptr(&cm->new_frame, &cm->alt_ref_frame); else vp8_yv12_copy_frame_ptr(&cm->last_frame, &cm->alt_ref_frame); } else if (cm->copy_buffer_to_arf == 2) vp8_yv12_copy_frame_ptr(&cm->golden_frame, &cm->alt_ref_frame); } Effectively, if refresh_last_frame, then new and last are swapped, so when "new" is copied to ARF, it's equivalent to copying LAST to ARF. If not refresh_last_frame, then LAST is copied to ARF. So LAST is copied to ARF in both cases. Commit 0ce3901 removed the first buffer swap but kept the refresh_last_frame?new:last behavior, changing the sense since the first swap wasn't done to the more readable refresh_last_frame?last:new, but this logic is not correct when !refresh_last_frame. This commit restores the correct behavior from v0.9.1 and prior. This case is missing from the test vector set. Change-Id: I8369fc13a37ae882e31a8a104da808a08bc8428f
2011-01-06 19:07:39 +01:00
int err = 0;
Swap alt/gold/new/last frame buffer ptrs instead of copying. At the end of the decode, frame buffers were being copied. The frames are not updated after the copy, they are just for reference on later frames. This change allows multiple references to the same frame buffer instead of copying it. Changes needed to be made to the encoder to handle this. The encoder is still doing frame buffer copies in similar places where pointer reference could be done. Change-Id: I7c38be4d23979cc49b5f17241ca3a78703803e66
2010-07-22 14:07:32 +02:00
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-28 01:04:02 +02:00
/* The alternate reference frame or golden frame can be updated
* using the new, last, or golden/alt ref frame. If it
* is updated using the newly decoded frame it is a refresh.
* An update using the last or golden/alt ref frame is a copy.
*/
Swap alt/gold/new/last frame buffer ptrs instead of copying. At the end of the decode, frame buffers were being copied. The frames are not updated after the copy, they are just for reference on later frames. This change allows multiple references to the same frame buffer instead of copying it. Changes needed to be made to the encoder to handle this. The encoder is still doing frame buffer copies in similar places where pointer reference could be done. Change-Id: I7c38be4d23979cc49b5f17241ca3a78703803e66
2010-07-22 14:07:32 +02:00
if (cm->copy_buffer_to_arf)
{
int new_fb = 0;
if (cm->copy_buffer_to_arf == 1)
fix last frame buffer copy logic regression Commit 0ce3901 introduced a change in the frame buffer copy logic where the NEW frame could be copied to the ARF or GF buffer through the copy_buffer_to_{arf,gf}==1 flags, if the LAST frame was not being refreshed. This is not correct. The intent of the copy_buffer_to_{arf,gf}==1 flag is to copy the LAST buffer. To copy the NEW buffer, the refresh_{alt_ref,golden}_frame flag should be used. The original buffer copy logic is fairly convoluted. For example: if (cm->refresh_last_frame) { vp8_swap_yv12_buffer(&cm->last_frame, &cm->new_frame); cm->frame_to_show = &cm->last_frame; } else { cm->frame_to_show = &cm->new_frame; } ... if (cm->copy_buffer_to_arf) { if (cm->copy_buffer_to_arf == 1) { if (cm->refresh_last_frame) vp8_yv12_copy_frame_ptr(&cm->new_frame, &cm->alt_ref_frame); else vp8_yv12_copy_frame_ptr(&cm->last_frame, &cm->alt_ref_frame); } else if (cm->copy_buffer_to_arf == 2) vp8_yv12_copy_frame_ptr(&cm->golden_frame, &cm->alt_ref_frame); } Effectively, if refresh_last_frame, then new and last are swapped, so when "new" is copied to ARF, it's equivalent to copying LAST to ARF. If not refresh_last_frame, then LAST is copied to ARF. So LAST is copied to ARF in both cases. Commit 0ce3901 removed the first buffer swap but kept the refresh_last_frame?new:last behavior, changing the sense since the first swap wasn't done to the more readable refresh_last_frame?last:new, but this logic is not correct when !refresh_last_frame. This commit restores the correct behavior from v0.9.1 and prior. This case is missing from the test vector set. Change-Id: I8369fc13a37ae882e31a8a104da808a08bc8428f
2011-01-06 19:07:39 +01:00
new_fb = cm->lst_fb_idx;
Swap alt/gold/new/last frame buffer ptrs instead of copying. At the end of the decode, frame buffers were being copied. The frames are not updated after the copy, they are just for reference on later frames. This change allows multiple references to the same frame buffer instead of copying it. Changes needed to be made to the encoder to handle this. The encoder is still doing frame buffer copies in similar places where pointer reference could be done. Change-Id: I7c38be4d23979cc49b5f17241ca3a78703803e66
2010-07-22 14:07:32 +02:00
else if (cm->copy_buffer_to_arf == 2)
new_fb = cm->gld_fb_idx;
else
err = -1;
ref_cnt_fb (cm->fb_idx_ref_cnt, &cm->alt_fb_idx, new_fb);
}
if (cm->copy_buffer_to_gf)
{
int new_fb = 0;
if (cm->copy_buffer_to_gf == 1)
fix last frame buffer copy logic regression Commit 0ce3901 introduced a change in the frame buffer copy logic where the NEW frame could be copied to the ARF or GF buffer through the copy_buffer_to_{arf,gf}==1 flags, if the LAST frame was not being refreshed. This is not correct. The intent of the copy_buffer_to_{arf,gf}==1 flag is to copy the LAST buffer. To copy the NEW buffer, the refresh_{alt_ref,golden}_frame flag should be used. The original buffer copy logic is fairly convoluted. For example: if (cm->refresh_last_frame) { vp8_swap_yv12_buffer(&cm->last_frame, &cm->new_frame); cm->frame_to_show = &cm->last_frame; } else { cm->frame_to_show = &cm->new_frame; } ... if (cm->copy_buffer_to_arf) { if (cm->copy_buffer_to_arf == 1) { if (cm->refresh_last_frame) vp8_yv12_copy_frame_ptr(&cm->new_frame, &cm->alt_ref_frame); else vp8_yv12_copy_frame_ptr(&cm->last_frame, &cm->alt_ref_frame); } else if (cm->copy_buffer_to_arf == 2) vp8_yv12_copy_frame_ptr(&cm->golden_frame, &cm->alt_ref_frame); } Effectively, if refresh_last_frame, then new and last are swapped, so when "new" is copied to ARF, it's equivalent to copying LAST to ARF. If not refresh_last_frame, then LAST is copied to ARF. So LAST is copied to ARF in both cases. Commit 0ce3901 removed the first buffer swap but kept the refresh_last_frame?new:last behavior, changing the sense since the first swap wasn't done to the more readable refresh_last_frame?last:new, but this logic is not correct when !refresh_last_frame. This commit restores the correct behavior from v0.9.1 and prior. This case is missing from the test vector set. Change-Id: I8369fc13a37ae882e31a8a104da808a08bc8428f
2011-01-06 19:07:39 +01:00
new_fb = cm->lst_fb_idx;
Swap alt/gold/new/last frame buffer ptrs instead of copying. At the end of the decode, frame buffers were being copied. The frames are not updated after the copy, they are just for reference on later frames. This change allows multiple references to the same frame buffer instead of copying it. Changes needed to be made to the encoder to handle this. The encoder is still doing frame buffer copies in similar places where pointer reference could be done. Change-Id: I7c38be4d23979cc49b5f17241ca3a78703803e66
2010-07-22 14:07:32 +02:00
else if (cm->copy_buffer_to_gf == 2)
new_fb = cm->alt_fb_idx;
else
err = -1;
ref_cnt_fb (cm->fb_idx_ref_cnt, &cm->gld_fb_idx, new_fb);
}
if (cm->refresh_golden_frame)
ref_cnt_fb (cm->fb_idx_ref_cnt, &cm->gld_fb_idx, cm->new_fb_idx);
if (cm->refresh_alt_ref_frame)
ref_cnt_fb (cm->fb_idx_ref_cnt, &cm->alt_fb_idx, cm->new_fb_idx);
if (cm->refresh_last_frame)
{
ref_cnt_fb (cm->fb_idx_ref_cnt, &cm->lst_fb_idx, cm->new_fb_idx);
cm->frame_to_show = &cm->yv12_fb[cm->lst_fb_idx];
}
else
cm->frame_to_show = &cm->yv12_fb[cm->new_fb_idx];
cm->fb_idx_ref_cnt[cm->new_fb_idx]--;
return err;
}
cosmetics: consistently use [u]int64_t Removes mixed usage of (unsigned) long long and INT64. Fixes Issue #208. Change-Id: I220d3ed5ce4bb1280cd38bb3715f208ce23cf83a
2011-07-26 03:44:59 +02:00
int vp8dx_receive_compressed_data(VP8D_PTR ptr, unsigned long size, const unsigned char *source, int64_t time_stamp)
Initial WebM release
2010-05-18 17:58:33 +02:00
{
Add runtime CPU detection support for ARM. The primary goal is to allow a binary to be built which supports NEON, but can fall back to non-NEON routines, since some Android devices do not have NEON, even if they are otherwise ARMv7 (e.g., Tegra). The configure-generated flags HAVE_ARMV7, etc., are used to decide which versions of each function to build, and when CONFIG_RUNTIME_CPU_DETECT is enabled, the correct version is chosen at run time. In order for this to work, the CFLAGS must be set to something appropriate (e.g., without -mfpu=neon for ARMv7, and with appropriate -march and -mcpu for even earlier configurations), or the native C code will not be able to run. The ASFLAGS must remain set for the most advanced instruction set required at build time, since the ARM assembler will refuse to emit them otherwise. I have not attempted to make any changes to configure to do this automatically. Doing so will probably require the addition of new configure options. Many of the hooks for RTCD on ARM were already there, but a lot of the code had bit-rotted, and a good deal of the ARM-specific code is not integrated into the RTCD structs at all. I did not try to resolve the latter, merely to add the minimal amount of protection around them to allow RTCD to work. Those functions that were called based on an ifdef at the calling site were expanded to check the RTCD flags at that site, but they should be added to an RTCD struct somewhere in the future. The functions invoked with global function pointers still are, but these should be moved into an RTCD struct for thread safety (I believe every platform currently supported has atomic pointer stores, but this is not guaranteed). The encoder's boolhuff functions did not even have _c and armv7 suffixes, and the correct version was resolved at link time. The token packing functions did have appropriate suffixes, but the version was selected with a define, with no associated RTCD struct. However, for both of these, the only armv7 instruction they actually used was rbit, and this was completely superfluous, so I reworked them to avoid it. The only non-ARMv4 instruction remaining in them is clz, which is ARMv5 (not even ARMv5TE is required). Considering that there are no ARM-specific configs which are not at least ARMv5TE, I did not try to detect these at runtime, and simply enable them for ARMv5 and above. Finally, the NEON register saving code was completely non-reentrant, since it saved the registers to a global, static variable. I moved the storage for this onto the stack. A single binary built with this code was tested on an ARM11 (ARMv6) and a Cortex A8 (ARMv7 w/NEON), for both the encoder and decoder, and produced identical output, while using the correct accelerated functions on each. I did not test on any earlier processors. Change-Id: I45cbd63a614f4554c3b325c45d46c0806f009eaa
2010-10-21 00:39:11 +02:00
#if HAVE_ARMV7
cosmetics: consistently use [u]int64_t Removes mixed usage of (unsigned) long long and INT64. Fixes Issue #208. Change-Id: I220d3ed5ce4bb1280cd38bb3715f208ce23cf83a
2011-07-26 03:44:59 +02:00
int64_t dx_store_reg[8];
Add runtime CPU detection support for ARM. The primary goal is to allow a binary to be built which supports NEON, but can fall back to non-NEON routines, since some Android devices do not have NEON, even if they are otherwise ARMv7 (e.g., Tegra). The configure-generated flags HAVE_ARMV7, etc., are used to decide which versions of each function to build, and when CONFIG_RUNTIME_CPU_DETECT is enabled, the correct version is chosen at run time. In order for this to work, the CFLAGS must be set to something appropriate (e.g., without -mfpu=neon for ARMv7, and with appropriate -march and -mcpu for even earlier configurations), or the native C code will not be able to run. The ASFLAGS must remain set for the most advanced instruction set required at build time, since the ARM assembler will refuse to emit them otherwise. I have not attempted to make any changes to configure to do this automatically. Doing so will probably require the addition of new configure options. Many of the hooks for RTCD on ARM were already there, but a lot of the code had bit-rotted, and a good deal of the ARM-specific code is not integrated into the RTCD structs at all. I did not try to resolve the latter, merely to add the minimal amount of protection around them to allow RTCD to work. Those functions that were called based on an ifdef at the calling site were expanded to check the RTCD flags at that site, but they should be added to an RTCD struct somewhere in the future. The functions invoked with global function pointers still are, but these should be moved into an RTCD struct for thread safety (I believe every platform currently supported has atomic pointer stores, but this is not guaranteed). The encoder's boolhuff functions did not even have _c and armv7 suffixes, and the correct version was resolved at link time. The token packing functions did have appropriate suffixes, but the version was selected with a define, with no associated RTCD struct. However, for both of these, the only armv7 instruction they actually used was rbit, and this was completely superfluous, so I reworked them to avoid it. The only non-ARMv4 instruction remaining in them is clz, which is ARMv5 (not even ARMv5TE is required). Considering that there are no ARM-specific configs which are not at least ARMv5TE, I did not try to detect these at runtime, and simply enable them for ARMv5 and above. Finally, the NEON register saving code was completely non-reentrant, since it saved the registers to a global, static variable. I moved the storage for this onto the stack. A single binary built with this code was tested on an ARM11 (ARMv6) and a Cortex A8 (ARMv7 w/NEON), for both the encoder and decoder, and produced identical output, while using the correct accelerated functions on each. I did not test on any earlier processors. Change-Id: I45cbd63a614f4554c3b325c45d46c0806f009eaa
2010-10-21 00:39:11 +02:00
#endif
Initial WebM release
2010-05-18 17:58:33 +02:00
VP8D_COMP *pbi = (VP8D_COMP *) ptr;
VP8_COMMON *cm = &pbi->common;
int retcode = 0;
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-28 01:04:02 +02:00
/*if(pbi->ready_for_new_data == 0)
return -1;*/
Initial WebM release
2010-05-18 17:58:33 +02:00
if (ptr == 0)
{
return -1;
}
pbi->common.error.error_code = VPX_CODEC_OK;
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
if (pbi->input_partition && !(source == NULL && size == 0))
Implement error tracking in the decoder A new vpx_codec_control called VP8D_GET_FRAME_CORRUPTED. The output from the function is non-zero if the last decoded frame contains corruption due to packet losses. The decoder is also modified to accept encoded frames of zero length. A zero length frame indicates to the decoder that one or more frames have been completely lost. This will mark the last decoded reference buffer as corrupted. The data pointer can be NULL if the length is zero. Change-Id: Ic5902c785a281c6e05329deea958554b7a6c75ce
2010-12-16 16:46:31 +01:00
{
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
/* Store a pointer to this partition and return. We haven't
* received the complete frame yet, so we will wait with decoding.
Adding error-concealment to the decoder. The error-concealer is plugged in after any motion vectors have been decoded. It tries to estimate any missing motion vectors from the motion vectors of the previous frame. Intra blocks with missing residual are replaced with inter blocks with estimated motion vectors. This feature was developed in a separate sandbox (sandbox/holmer/error-concealment). Change-Id: I5c8917b031078d79dbafd90f6006680e84a23412
2011-05-02 15:30:51 +02:00
*/
Fix necessary for input partitions iface to match the RTP profile These changes fixes a glitch between the RTP profile and the input partitions interface. Since there's no way for the user to know the actual number of partitions, the decoder have to read the multi_token_paritition bits also when input partitions mode is enabled. Included are also a couple of fixes for issues with independent partitions and uninitialized memory reads. Change-Id: I6f93b15287d291169ed681898ed3fbcc5dc81837
2011-09-06 14:34:36 +02:00
assert(pbi->num_partitions < MAX_PARTITIONS);
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
pbi->partitions[pbi->num_partitions] = source;
pbi->partition_sizes[pbi->num_partitions] = size;
pbi->source_sz += size;
pbi->num_partitions++;
Fix necessary for input partitions iface to match the RTP profile These changes fixes a glitch between the RTP profile and the input partitions interface. Since there's no way for the user to know the actual number of partitions, the decoder have to read the multi_token_paritition bits also when input partitions mode is enabled. Included are also a couple of fixes for issues with independent partitions and uninitialized memory reads. Change-Id: I6f93b15287d291169ed681898ed3fbcc5dc81837
2011-09-06 14:34:36 +02:00
if (pbi->num_partitions > (1 << EIGHT_PARTITION) + 1)
Adding error-concealment to the decoder. The error-concealer is plugged in after any motion vectors have been decoded. It tries to estimate any missing motion vectors from the motion vectors of the previous frame. Intra blocks with missing residual are replaced with inter blocks with estimated motion vectors. This feature was developed in a separate sandbox (sandbox/holmer/error-concealment). Change-Id: I5c8917b031078d79dbafd90f6006680e84a23412
2011-05-02 15:30:51 +02:00
{
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
pbi->common.error.error_code = VPX_CODEC_UNSUP_BITSTREAM;
pbi->common.error.setjmp = 0;
Fix necessary for input partitions iface to match the RTP profile These changes fixes a glitch between the RTP profile and the input partitions interface. Since there's no way for the user to know the actual number of partitions, the decoder have to read the multi_token_paritition bits also when input partitions mode is enabled. Included are also a couple of fixes for issues with independent partitions and uninitialized memory reads. Change-Id: I6f93b15287d291169ed681898ed3fbcc5dc81837
2011-09-06 14:34:36 +02:00
pbi->num_partitions = 0;
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
return -1;
Adding error-concealment to the decoder. The error-concealer is plugged in after any motion vectors have been decoded. It tries to estimate any missing motion vectors from the motion vectors of the previous frame. Intra blocks with missing residual are replaced with inter blocks with estimated motion vectors. This feature was developed in a separate sandbox (sandbox/holmer/error-concealment). Change-Id: I5c8917b031078d79dbafd90f6006680e84a23412
2011-05-02 15:30:51 +02:00
}
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
return 0;
Implement error tracking in the decoder A new vpx_codec_control called VP8D_GET_FRAME_CORRUPTED. The output from the function is non-zero if the last decoded frame contains corruption due to packet losses. The decoder is also modified to accept encoded frames of zero length. A zero length frame indicates to the decoder that one or more frames have been completely lost. This will mark the last decoded reference buffer as corrupted. The data pointer can be NULL if the length is zero. Change-Id: Ic5902c785a281c6e05329deea958554b7a6c75ce
2010-12-16 16:46:31 +01:00
}
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
else
{
if (!pbi->input_partition)
{
pbi->Source = source;
pbi->source_sz = size;
}
Fix necessary for input partitions iface to match the RTP profile These changes fixes a glitch between the RTP profile and the input partitions interface. Since there's no way for the user to know the actual number of partitions, the decoder have to read the multi_token_paritition bits also when input partitions mode is enabled. Included are also a couple of fixes for issues with independent partitions and uninitialized memory reads. Change-Id: I6f93b15287d291169ed681898ed3fbcc5dc81837
2011-09-06 14:34:36 +02:00
else
{
assert(pbi->common.multi_token_partition <= EIGHT_PARTITION);
if (pbi->num_partitions == 0)
{
pbi->num_partitions = 1;
pbi->partitions[0] = NULL;
pbi->partition_sizes[0] = 0;
}
while (pbi->num_partitions < (1 << pbi->common.multi_token_partition) + 1)
{
// Reset all missing partitions
pbi->partitions[pbi->num_partitions] =
pbi->partitions[pbi->num_partitions - 1] +
pbi->partition_sizes[pbi->num_partitions - 1];
pbi->partition_sizes[pbi->num_partitions] = 0;
pbi->num_partitions++;
}
}
Implement error tracking in the decoder A new vpx_codec_control called VP8D_GET_FRAME_CORRUPTED. The output from the function is non-zero if the last decoded frame contains corruption due to packet losses. The decoder is also modified to accept encoded frames of zero length. A zero length frame indicates to the decoder that one or more frames have been completely lost. This will mark the last decoded reference buffer as corrupted. The data pointer can be NULL if the length is zero. Change-Id: Ic5902c785a281c6e05329deea958554b7a6c75ce
2010-12-16 16:46:31 +01:00
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
if (pbi->source_sz == 0)
{
/* This is used to signal that we are missing frames.
* We do not know if the missing frame(s) was supposed to update
* any of the reference buffers, but we act conservative and
* mark only the last buffer as corrupted.
*/
cm->yv12_fb[cm->lst_fb_idx].corrupted = 1;
/* If error concealment is disabled we won't signal missing frames to
* the decoder.
*/
Disable error concealment until first key frame is decoded When error concealment is enabled the first key frame must be successfully received before error concealment is activated. Error concealment will be activated when the delta following delta frame is received. Also fixed a couple of bugs related to error tracking in multi-threading. And avoiding decoding corrupt residual when we have multiple non-resilient partitions. Change-Id: I45c4bb296e2f05f57624aef500a874faf431a60d
2011-08-08 10:56:20 +02:00
if (!pbi->ec_active)
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
{
/* Signal that we have no frame to show. */
cm->show_frame = 0;
Disable error concealment until first key frame is decoded When error concealment is enabled the first key frame must be successfully received before error concealment is activated. Error concealment will be activated when the delta following delta frame is received. Also fixed a couple of bugs related to error tracking in multi-threading. And avoiding decoding corrupt residual when we have multiple non-resilient partitions. Change-Id: I45c4bb296e2f05f57624aef500a874faf431a60d
2011-08-08 10:56:20 +02:00
pbi->num_partitions = 0;
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
/* Nothing more to do. */
return 0;
}
}
Implement error tracking in the decoder A new vpx_codec_control called VP8D_GET_FRAME_CORRUPTED. The output from the function is non-zero if the last decoded frame contains corruption due to packet losses. The decoder is also modified to accept encoded frames of zero length. A zero length frame indicates to the decoder that one or more frames have been completely lost. This will mark the last decoded reference buffer as corrupted. The data pointer can be NULL if the length is zero. Change-Id: Ic5902c785a281c6e05329deea958554b7a6c75ce
2010-12-16 16:46:31 +01:00
Add runtime CPU detection support for ARM. The primary goal is to allow a binary to be built which supports NEON, but can fall back to non-NEON routines, since some Android devices do not have NEON, even if they are otherwise ARMv7 (e.g., Tegra). The configure-generated flags HAVE_ARMV7, etc., are used to decide which versions of each function to build, and when CONFIG_RUNTIME_CPU_DETECT is enabled, the correct version is chosen at run time. In order for this to work, the CFLAGS must be set to something appropriate (e.g., without -mfpu=neon for ARMv7, and with appropriate -march and -mcpu for even earlier configurations), or the native C code will not be able to run. The ASFLAGS must remain set for the most advanced instruction set required at build time, since the ARM assembler will refuse to emit them otherwise. I have not attempted to make any changes to configure to do this automatically. Doing so will probably require the addition of new configure options. Many of the hooks for RTCD on ARM were already there, but a lot of the code had bit-rotted, and a good deal of the ARM-specific code is not integrated into the RTCD structs at all. I did not try to resolve the latter, merely to add the minimal amount of protection around them to allow RTCD to work. Those functions that were called based on an ifdef at the calling site were expanded to check the RTCD flags at that site, but they should be added to an RTCD struct somewhere in the future. The functions invoked with global function pointers still are, but these should be moved into an RTCD struct for thread safety (I believe every platform currently supported has atomic pointer stores, but this is not guaranteed). The encoder's boolhuff functions did not even have _c and armv7 suffixes, and the correct version was resolved at link time. The token packing functions did have appropriate suffixes, but the version was selected with a define, with no associated RTCD struct. However, for both of these, the only armv7 instruction they actually used was rbit, and this was completely superfluous, so I reworked them to avoid it. The only non-ARMv4 instruction remaining in them is clz, which is ARMv5 (not even ARMv5TE is required). Considering that there are no ARM-specific configs which are not at least ARMv5TE, I did not try to detect these at runtime, and simply enable them for ARMv5 and above. Finally, the NEON register saving code was completely non-reentrant, since it saved the registers to a global, static variable. I moved the storage for this onto the stack. A single binary built with this code was tested on an ARM11 (ARMv6) and a Cortex A8 (ARMv7 w/NEON), for both the encoder and decoder, and produced identical output, while using the correct accelerated functions on each. I did not test on any earlier processors. Change-Id: I45cbd63a614f4554c3b325c45d46c0806f009eaa
2010-10-21 00:39:11 +02:00
#if HAVE_ARMV7
#if CONFIG_RUNTIME_CPU_DETECT
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
if (cm->rtcd.flags & HAS_NEON)
Add runtime CPU detection support for ARM. The primary goal is to allow a binary to be built which supports NEON, but can fall back to non-NEON routines, since some Android devices do not have NEON, even if they are otherwise ARMv7 (e.g., Tegra). The configure-generated flags HAVE_ARMV7, etc., are used to decide which versions of each function to build, and when CONFIG_RUNTIME_CPU_DETECT is enabled, the correct version is chosen at run time. In order for this to work, the CFLAGS must be set to something appropriate (e.g., without -mfpu=neon for ARMv7, and with appropriate -march and -mcpu for even earlier configurations), or the native C code will not be able to run. The ASFLAGS must remain set for the most advanced instruction set required at build time, since the ARM assembler will refuse to emit them otherwise. I have not attempted to make any changes to configure to do this automatically. Doing so will probably require the addition of new configure options. Many of the hooks for RTCD on ARM were already there, but a lot of the code had bit-rotted, and a good deal of the ARM-specific code is not integrated into the RTCD structs at all. I did not try to resolve the latter, merely to add the minimal amount of protection around them to allow RTCD to work. Those functions that were called based on an ifdef at the calling site were expanded to check the RTCD flags at that site, but they should be added to an RTCD struct somewhere in the future. The functions invoked with global function pointers still are, but these should be moved into an RTCD struct for thread safety (I believe every platform currently supported has atomic pointer stores, but this is not guaranteed). The encoder's boolhuff functions did not even have _c and armv7 suffixes, and the correct version was resolved at link time. The token packing functions did have appropriate suffixes, but the version was selected with a define, with no associated RTCD struct. However, for both of these, the only armv7 instruction they actually used was rbit, and this was completely superfluous, so I reworked them to avoid it. The only non-ARMv4 instruction remaining in them is clz, which is ARMv5 (not even ARMv5TE is required). Considering that there are no ARM-specific configs which are not at least ARMv5TE, I did not try to detect these at runtime, and simply enable them for ARMv5 and above. Finally, the NEON register saving code was completely non-reentrant, since it saved the registers to a global, static variable. I moved the storage for this onto the stack. A single binary built with this code was tested on an ARM11 (ARMv6) and a Cortex A8 (ARMv7 w/NEON), for both the encoder and decoder, and produced identical output, while using the correct accelerated functions on each. I did not test on any earlier processors. Change-Id: I45cbd63a614f4554c3b325c45d46c0806f009eaa
2010-10-21 00:39:11 +02:00
#endif
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
{
vp8_push_neon(dx_store_reg);
}
Add runtime CPU detection support for ARM. The primary goal is to allow a binary to be built which supports NEON, but can fall back to non-NEON routines, since some Android devices do not have NEON, even if they are otherwise ARMv7 (e.g., Tegra). The configure-generated flags HAVE_ARMV7, etc., are used to decide which versions of each function to build, and when CONFIG_RUNTIME_CPU_DETECT is enabled, the correct version is chosen at run time. In order for this to work, the CFLAGS must be set to something appropriate (e.g., without -mfpu=neon for ARMv7, and with appropriate -march and -mcpu for even earlier configurations), or the native C code will not be able to run. The ASFLAGS must remain set for the most advanced instruction set required at build time, since the ARM assembler will refuse to emit them otherwise. I have not attempted to make any changes to configure to do this automatically. Doing so will probably require the addition of new configure options. Many of the hooks for RTCD on ARM were already there, but a lot of the code had bit-rotted, and a good deal of the ARM-specific code is not integrated into the RTCD structs at all. I did not try to resolve the latter, merely to add the minimal amount of protection around them to allow RTCD to work. Those functions that were called based on an ifdef at the calling site were expanded to check the RTCD flags at that site, but they should be added to an RTCD struct somewhere in the future. The functions invoked with global function pointers still are, but these should be moved into an RTCD struct for thread safety (I believe every platform currently supported has atomic pointer stores, but this is not guaranteed). The encoder's boolhuff functions did not even have _c and armv7 suffixes, and the correct version was resolved at link time. The token packing functions did have appropriate suffixes, but the version was selected with a define, with no associated RTCD struct. However, for both of these, the only armv7 instruction they actually used was rbit, and this was completely superfluous, so I reworked them to avoid it. The only non-ARMv4 instruction remaining in them is clz, which is ARMv5 (not even ARMv5TE is required). Considering that there are no ARM-specific configs which are not at least ARMv5TE, I did not try to detect these at runtime, and simply enable them for ARMv5 and above. Finally, the NEON register saving code was completely non-reentrant, since it saved the registers to a global, static variable. I moved the storage for this onto the stack. A single binary built with this code was tested on an ARM11 (ARMv6) and a Cortex A8 (ARMv7 w/NEON), for both the encoder and decoder, and produced identical output, while using the correct accelerated functions on each. I did not test on any earlier processors. Change-Id: I45cbd63a614f4554c3b325c45d46c0806f009eaa
2010-10-21 00:39:11 +02:00
#endif
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
cm->new_fb_idx = get_free_fb (cm);
Improve handling of invalid frames. The code was not checking for frame sizes smaller than 3 bytes, and the partition size checks might have failed if the input buffer was within 16MB of the top of the heap. In addition, the reference count on the current frame buffer was not being decremented on error, so after a small number of errors, no new frame buffer could be found and it would run off the list of them. Change-Id: I0c60dba6adb1e2a29df39754f72a56ab6c776b46
2010-10-20 00:40:46 +02:00
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
if (setjmp(pbi->common.error.jmp))
{
Add runtime CPU detection support for ARM. The primary goal is to allow a binary to be built which supports NEON, but can fall back to non-NEON routines, since some Android devices do not have NEON, even if they are otherwise ARMv7 (e.g., Tegra). The configure-generated flags HAVE_ARMV7, etc., are used to decide which versions of each function to build, and when CONFIG_RUNTIME_CPU_DETECT is enabled, the correct version is chosen at run time. In order for this to work, the CFLAGS must be set to something appropriate (e.g., without -mfpu=neon for ARMv7, and with appropriate -march and -mcpu for even earlier configurations), or the native C code will not be able to run. The ASFLAGS must remain set for the most advanced instruction set required at build time, since the ARM assembler will refuse to emit them otherwise. I have not attempted to make any changes to configure to do this automatically. Doing so will probably require the addition of new configure options. Many of the hooks for RTCD on ARM were already there, but a lot of the code had bit-rotted, and a good deal of the ARM-specific code is not integrated into the RTCD structs at all. I did not try to resolve the latter, merely to add the minimal amount of protection around them to allow RTCD to work. Those functions that were called based on an ifdef at the calling site were expanded to check the RTCD flags at that site, but they should be added to an RTCD struct somewhere in the future. The functions invoked with global function pointers still are, but these should be moved into an RTCD struct for thread safety (I believe every platform currently supported has atomic pointer stores, but this is not guaranteed). The encoder's boolhuff functions did not even have _c and armv7 suffixes, and the correct version was resolved at link time. The token packing functions did have appropriate suffixes, but the version was selected with a define, with no associated RTCD struct. However, for both of these, the only armv7 instruction they actually used was rbit, and this was completely superfluous, so I reworked them to avoid it. The only non-ARMv4 instruction remaining in them is clz, which is ARMv5 (not even ARMv5TE is required). Considering that there are no ARM-specific configs which are not at least ARMv5TE, I did not try to detect these at runtime, and simply enable them for ARMv5 and above. Finally, the NEON register saving code was completely non-reentrant, since it saved the registers to a global, static variable. I moved the storage for this onto the stack. A single binary built with this code was tested on an ARM11 (ARMv6) and a Cortex A8 (ARMv7 w/NEON), for both the encoder and decoder, and produced identical output, while using the correct accelerated functions on each. I did not test on any earlier processors. Change-Id: I45cbd63a614f4554c3b325c45d46c0806f009eaa
2010-10-21 00:39:11 +02:00
#if HAVE_ARMV7
#if CONFIG_RUNTIME_CPU_DETECT
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
if (cm->rtcd.flags & HAS_NEON)
Add runtime CPU detection support for ARM. The primary goal is to allow a binary to be built which supports NEON, but can fall back to non-NEON routines, since some Android devices do not have NEON, even if they are otherwise ARMv7 (e.g., Tegra). The configure-generated flags HAVE_ARMV7, etc., are used to decide which versions of each function to build, and when CONFIG_RUNTIME_CPU_DETECT is enabled, the correct version is chosen at run time. In order for this to work, the CFLAGS must be set to something appropriate (e.g., without -mfpu=neon for ARMv7, and with appropriate -march and -mcpu for even earlier configurations), or the native C code will not be able to run. The ASFLAGS must remain set for the most advanced instruction set required at build time, since the ARM assembler will refuse to emit them otherwise. I have not attempted to make any changes to configure to do this automatically. Doing so will probably require the addition of new configure options. Many of the hooks for RTCD on ARM were already there, but a lot of the code had bit-rotted, and a good deal of the ARM-specific code is not integrated into the RTCD structs at all. I did not try to resolve the latter, merely to add the minimal amount of protection around them to allow RTCD to work. Those functions that were called based on an ifdef at the calling site were expanded to check the RTCD flags at that site, but they should be added to an RTCD struct somewhere in the future. The functions invoked with global function pointers still are, but these should be moved into an RTCD struct for thread safety (I believe every platform currently supported has atomic pointer stores, but this is not guaranteed). The encoder's boolhuff functions did not even have _c and armv7 suffixes, and the correct version was resolved at link time. The token packing functions did have appropriate suffixes, but the version was selected with a define, with no associated RTCD struct. However, for both of these, the only armv7 instruction they actually used was rbit, and this was completely superfluous, so I reworked them to avoid it. The only non-ARMv4 instruction remaining in them is clz, which is ARMv5 (not even ARMv5TE is required). Considering that there are no ARM-specific configs which are not at least ARMv5TE, I did not try to detect these at runtime, and simply enable them for ARMv5 and above. Finally, the NEON register saving code was completely non-reentrant, since it saved the registers to a global, static variable. I moved the storage for this onto the stack. A single binary built with this code was tested on an ARM11 (ARMv6) and a Cortex A8 (ARMv7 w/NEON), for both the encoder and decoder, and produced identical output, while using the correct accelerated functions on each. I did not test on any earlier processors. Change-Id: I45cbd63a614f4554c3b325c45d46c0806f009eaa
2010-10-21 00:39:11 +02:00
#endif
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
{
vp8_pop_neon(dx_store_reg);
}
Add runtime CPU detection support for ARM. The primary goal is to allow a binary to be built which supports NEON, but can fall back to non-NEON routines, since some Android devices do not have NEON, even if they are otherwise ARMv7 (e.g., Tegra). The configure-generated flags HAVE_ARMV7, etc., are used to decide which versions of each function to build, and when CONFIG_RUNTIME_CPU_DETECT is enabled, the correct version is chosen at run time. In order for this to work, the CFLAGS must be set to something appropriate (e.g., without -mfpu=neon for ARMv7, and with appropriate -march and -mcpu for even earlier configurations), or the native C code will not be able to run. The ASFLAGS must remain set for the most advanced instruction set required at build time, since the ARM assembler will refuse to emit them otherwise. I have not attempted to make any changes to configure to do this automatically. Doing so will probably require the addition of new configure options. Many of the hooks for RTCD on ARM were already there, but a lot of the code had bit-rotted, and a good deal of the ARM-specific code is not integrated into the RTCD structs at all. I did not try to resolve the latter, merely to add the minimal amount of protection around them to allow RTCD to work. Those functions that were called based on an ifdef at the calling site were expanded to check the RTCD flags at that site, but they should be added to an RTCD struct somewhere in the future. The functions invoked with global function pointers still are, but these should be moved into an RTCD struct for thread safety (I believe every platform currently supported has atomic pointer stores, but this is not guaranteed). The encoder's boolhuff functions did not even have _c and armv7 suffixes, and the correct version was resolved at link time. The token packing functions did have appropriate suffixes, but the version was selected with a define, with no associated RTCD struct. However, for both of these, the only armv7 instruction they actually used was rbit, and this was completely superfluous, so I reworked them to avoid it. The only non-ARMv4 instruction remaining in them is clz, which is ARMv5 (not even ARMv5TE is required). Considering that there are no ARM-specific configs which are not at least ARMv5TE, I did not try to detect these at runtime, and simply enable them for ARMv5 and above. Finally, the NEON register saving code was completely non-reentrant, since it saved the registers to a global, static variable. I moved the storage for this onto the stack. A single binary built with this code was tested on an ARM11 (ARMv6) and a Cortex A8 (ARMv7 w/NEON), for both the encoder and decoder, and produced identical output, while using the correct accelerated functions on each. I did not test on any earlier processors. Change-Id: I45cbd63a614f4554c3b325c45d46c0806f009eaa
2010-10-21 00:39:11 +02:00
#endif
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
pbi->common.error.setjmp = 0;
Implement error tracking in the decoder A new vpx_codec_control called VP8D_GET_FRAME_CORRUPTED. The output from the function is non-zero if the last decoded frame contains corruption due to packet losses. The decoder is also modified to accept encoded frames of zero length. A zero length frame indicates to the decoder that one or more frames have been completely lost. This will mark the last decoded reference buffer as corrupted. The data pointer can be NULL if the length is zero. Change-Id: Ic5902c785a281c6e05329deea958554b7a6c75ce
2010-12-16 16:46:31 +01:00
Disable error concealment until first key frame is decoded When error concealment is enabled the first key frame must be successfully received before error concealment is activated. Error concealment will be activated when the delta following delta frame is received. Also fixed a couple of bugs related to error tracking in multi-threading. And avoiding decoding corrupt residual when we have multiple non-resilient partitions. Change-Id: I45c4bb296e2f05f57624aef500a874faf431a60d
2011-08-08 10:56:20 +02:00
pbi->num_partitions = 0;
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
/* We do not know if the missing frame(s) was supposed to update
* any of the reference buffers, but we act conservative and
* mark only the last buffer as corrupted.
*/
cm->yv12_fb[cm->lst_fb_idx].corrupted = 1;
Initial WebM release
2010-05-18 17:58:33 +02:00
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
if (cm->fb_idx_ref_cnt[cm->new_fb_idx] > 0)
cm->fb_idx_ref_cnt[cm->new_fb_idx]--;
return -1;
}
Initial WebM release
2010-05-18 17:58:33 +02:00
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
pbi->common.error.setjmp = 1;
}
Initial WebM release
2010-05-18 17:58:33 +02:00
retcode = vp8_decode_frame(pbi);
if (retcode < 0)
{
#if HAVE_ARMV7
Add runtime CPU detection support for ARM. The primary goal is to allow a binary to be built which supports NEON, but can fall back to non-NEON routines, since some Android devices do not have NEON, even if they are otherwise ARMv7 (e.g., Tegra). The configure-generated flags HAVE_ARMV7, etc., are used to decide which versions of each function to build, and when CONFIG_RUNTIME_CPU_DETECT is enabled, the correct version is chosen at run time. In order for this to work, the CFLAGS must be set to something appropriate (e.g., without -mfpu=neon for ARMv7, and with appropriate -march and -mcpu for even earlier configurations), or the native C code will not be able to run. The ASFLAGS must remain set for the most advanced instruction set required at build time, since the ARM assembler will refuse to emit them otherwise. I have not attempted to make any changes to configure to do this automatically. Doing so will probably require the addition of new configure options. Many of the hooks for RTCD on ARM were already there, but a lot of the code had bit-rotted, and a good deal of the ARM-specific code is not integrated into the RTCD structs at all. I did not try to resolve the latter, merely to add the minimal amount of protection around them to allow RTCD to work. Those functions that were called based on an ifdef at the calling site were expanded to check the RTCD flags at that site, but they should be added to an RTCD struct somewhere in the future. The functions invoked with global function pointers still are, but these should be moved into an RTCD struct for thread safety (I believe every platform currently supported has atomic pointer stores, but this is not guaranteed). The encoder's boolhuff functions did not even have _c and armv7 suffixes, and the correct version was resolved at link time. The token packing functions did have appropriate suffixes, but the version was selected with a define, with no associated RTCD struct. However, for both of these, the only armv7 instruction they actually used was rbit, and this was completely superfluous, so I reworked them to avoid it. The only non-ARMv4 instruction remaining in them is clz, which is ARMv5 (not even ARMv5TE is required). Considering that there are no ARM-specific configs which are not at least ARMv5TE, I did not try to detect these at runtime, and simply enable them for ARMv5 and above. Finally, the NEON register saving code was completely non-reentrant, since it saved the registers to a global, static variable. I moved the storage for this onto the stack. A single binary built with this code was tested on an ARM11 (ARMv6) and a Cortex A8 (ARMv7 w/NEON), for both the encoder and decoder, and produced identical output, while using the correct accelerated functions on each. I did not test on any earlier processors. Change-Id: I45cbd63a614f4554c3b325c45d46c0806f009eaa
2010-10-21 00:39:11 +02:00
#if CONFIG_RUNTIME_CPU_DETECT
if (cm->rtcd.flags & HAS_NEON)
#endif
{
vp8_pop_neon(dx_store_reg);
}
Initial WebM release
2010-05-18 17:58:33 +02:00
#endif
pbi->common.error.error_code = VPX_CODEC_ERROR;
pbi->common.error.setjmp = 0;
Fix necessary for input partitions iface to match the RTP profile These changes fixes a glitch between the RTP profile and the input partitions interface. Since there's no way for the user to know the actual number of partitions, the decoder have to read the multi_token_paritition bits also when input partitions mode is enabled. Included are also a couple of fixes for issues with independent partitions and uninitialized memory reads. Change-Id: I6f93b15287d291169ed681898ed3fbcc5dc81837
2011-09-06 14:34:36 +02:00
pbi->num_partitions = 0;
Improve handling of invalid frames. The code was not checking for frame sizes smaller than 3 bytes, and the partition size checks might have failed if the input buffer was within 16MB of the top of the heap. In addition, the reference count on the current frame buffer was not being decremented on error, so after a small number of errors, no new frame buffer could be found and it would run off the list of them. Change-Id: I0c60dba6adb1e2a29df39754f72a56ab6c776b46
2010-10-20 00:40:46 +02:00
if (cm->fb_idx_ref_cnt[cm->new_fb_idx] > 0)
cm->fb_idx_ref_cnt[cm->new_fb_idx]--;
Initial WebM release
2010-05-18 17:58:33 +02:00
return retcode;
}
Put more code under #if CONFIG_MULTITHREAD. Change-Id: Icf4b692099d7d249fe3553852b1022b027b28e4b
2011-02-05 06:29:25 +01:00
#if CONFIG_MULTITHREAD
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 20:08:52 +02:00
if (pbi->b_multithreaded_rd && cm->multi_token_partition != ONE_PARTITION)
Initial WebM release
2010-05-18 17:58:33 +02:00
{
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 20:08:52 +02:00
if (swap_frame_buffers (cm))
{
Add runtime CPU detection support for ARM. The primary goal is to allow a binary to be built which supports NEON, but can fall back to non-NEON routines, since some Android devices do not have NEON, even if they are otherwise ARMv7 (e.g., Tegra). The configure-generated flags HAVE_ARMV7, etc., are used to decide which versions of each function to build, and when CONFIG_RUNTIME_CPU_DETECT is enabled, the correct version is chosen at run time. In order for this to work, the CFLAGS must be set to something appropriate (e.g., without -mfpu=neon for ARMv7, and with appropriate -march and -mcpu for even earlier configurations), or the native C code will not be able to run. The ASFLAGS must remain set for the most advanced instruction set required at build time, since the ARM assembler will refuse to emit them otherwise. I have not attempted to make any changes to configure to do this automatically. Doing so will probably require the addition of new configure options. Many of the hooks for RTCD on ARM were already there, but a lot of the code had bit-rotted, and a good deal of the ARM-specific code is not integrated into the RTCD structs at all. I did not try to resolve the latter, merely to add the minimal amount of protection around them to allow RTCD to work. Those functions that were called based on an ifdef at the calling site were expanded to check the RTCD flags at that site, but they should be added to an RTCD struct somewhere in the future. The functions invoked with global function pointers still are, but these should be moved into an RTCD struct for thread safety (I believe every platform currently supported has atomic pointer stores, but this is not guaranteed). The encoder's boolhuff functions did not even have _c and armv7 suffixes, and the correct version was resolved at link time. The token packing functions did have appropriate suffixes, but the version was selected with a define, with no associated RTCD struct. However, for both of these, the only armv7 instruction they actually used was rbit, and this was completely superfluous, so I reworked them to avoid it. The only non-ARMv4 instruction remaining in them is clz, which is ARMv5 (not even ARMv5TE is required). Considering that there are no ARM-specific configs which are not at least ARMv5TE, I did not try to detect these at runtime, and simply enable them for ARMv5 and above. Finally, the NEON register saving code was completely non-reentrant, since it saved the registers to a global, static variable. I moved the storage for this onto the stack. A single binary built with this code was tested on an ARM11 (ARMv6) and a Cortex A8 (ARMv7 w/NEON), for both the encoder and decoder, and produced identical output, while using the correct accelerated functions on each. I did not test on any earlier processors. Change-Id: I45cbd63a614f4554c3b325c45d46c0806f009eaa
2010-10-21 00:39:11 +02:00
#if HAVE_ARMV7
#if CONFIG_RUNTIME_CPU_DETECT
if (cm->rtcd.flags & HAS_NEON)
#endif
{
vp8_pop_neon(dx_store_reg);
}
#endif
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 20:08:52 +02:00
pbi->common.error.error_code = VPX_CODEC_ERROR;
pbi->common.error.setjmp = 0;
Fix necessary for input partitions iface to match the RTP profile These changes fixes a glitch between the RTP profile and the input partitions interface. Since there's no way for the user to know the actual number of partitions, the decoder have to read the multi_token_paritition bits also when input partitions mode is enabled. Included are also a couple of fixes for issues with independent partitions and uninitialized memory reads. Change-Id: I6f93b15287d291169ed681898ed3fbcc5dc81837
2011-09-06 14:34:36 +02:00
pbi->num_partitions = 0;
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 20:08:52 +02:00
return -1;
}
} else
Put more code under #if CONFIG_MULTITHREAD. Change-Id: Icf4b692099d7d249fe3553852b1022b027b28e4b
2011-02-05 06:29:25 +01:00
#endif
Initial WebM release
2010-05-18 17:58:33 +02:00
{
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 20:08:52 +02:00
if (swap_frame_buffers (cm))
{
Add runtime CPU detection support for ARM. The primary goal is to allow a binary to be built which supports NEON, but can fall back to non-NEON routines, since some Android devices do not have NEON, even if they are otherwise ARMv7 (e.g., Tegra). The configure-generated flags HAVE_ARMV7, etc., are used to decide which versions of each function to build, and when CONFIG_RUNTIME_CPU_DETECT is enabled, the correct version is chosen at run time. In order for this to work, the CFLAGS must be set to something appropriate (e.g., without -mfpu=neon for ARMv7, and with appropriate -march and -mcpu for even earlier configurations), or the native C code will not be able to run. The ASFLAGS must remain set for the most advanced instruction set required at build time, since the ARM assembler will refuse to emit them otherwise. I have not attempted to make any changes to configure to do this automatically. Doing so will probably require the addition of new configure options. Many of the hooks for RTCD on ARM were already there, but a lot of the code had bit-rotted, and a good deal of the ARM-specific code is not integrated into the RTCD structs at all. I did not try to resolve the latter, merely to add the minimal amount of protection around them to allow RTCD to work. Those functions that were called based on an ifdef at the calling site were expanded to check the RTCD flags at that site, but they should be added to an RTCD struct somewhere in the future. The functions invoked with global function pointers still are, but these should be moved into an RTCD struct for thread safety (I believe every platform currently supported has atomic pointer stores, but this is not guaranteed). The encoder's boolhuff functions did not even have _c and armv7 suffixes, and the correct version was resolved at link time. The token packing functions did have appropriate suffixes, but the version was selected with a define, with no associated RTCD struct. However, for both of these, the only armv7 instruction they actually used was rbit, and this was completely superfluous, so I reworked them to avoid it. The only non-ARMv4 instruction remaining in them is clz, which is ARMv5 (not even ARMv5TE is required). Considering that there are no ARM-specific configs which are not at least ARMv5TE, I did not try to detect these at runtime, and simply enable them for ARMv5 and above. Finally, the NEON register saving code was completely non-reentrant, since it saved the registers to a global, static variable. I moved the storage for this onto the stack. A single binary built with this code was tested on an ARM11 (ARMv6) and a Cortex A8 (ARMv7 w/NEON), for both the encoder and decoder, and produced identical output, while using the correct accelerated functions on each. I did not test on any earlier processors. Change-Id: I45cbd63a614f4554c3b325c45d46c0806f009eaa
2010-10-21 00:39:11 +02:00
#if HAVE_ARMV7
#if CONFIG_RUNTIME_CPU_DETECT
if (cm->rtcd.flags & HAS_NEON)
#endif
{
vp8_pop_neon(dx_store_reg);
}
#endif
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 20:08:52 +02:00
pbi->common.error.error_code = VPX_CODEC_ERROR;
pbi->common.error.setjmp = 0;
Fix necessary for input partitions iface to match the RTP profile These changes fixes a glitch between the RTP profile and the input partitions interface. Since there's no way for the user to know the actual number of partitions, the decoder have to read the multi_token_paritition bits also when input partitions mode is enabled. Included are also a couple of fixes for issues with independent partitions and uninitialized memory reads. Change-Id: I6f93b15287d291169ed681898ed3fbcc5dc81837
2011-09-06 14:34:36 +02:00
pbi->num_partitions = 0;
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 20:08:52 +02:00
return -1;
}
fix sharpness bug and clean up sharpness was not recalculated in vp8cx_pick_filter_level_fast remove last_filter_type. all values are calculated, don't need to update the lfi data when it changes. always use cm->sharpness_level. the extra indirection was annoying. don't track last frame_type or sharpness_level manually. frame type only matters for motion search and sharpness_level is taken care of in frame_init move function declarations to their proper header Change-Id: I7ef037bd4bf8cf5e37d2d36bd03b5e22a2ad91db
2011-07-20 21:53:42 +02:00
if(cm->filter_level)
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 20:08:52 +02:00
{
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-28 01:04:02 +02:00
/* Apply the loop filter if appropriate. */
fix sharpness bug and clean up sharpness was not recalculated in vp8cx_pick_filter_level_fast remove last_filter_type. all values are calculated, don't need to update the lfi data when it changes. always use cm->sharpness_level. the extra indirection was annoying. don't track last frame_type or sharpness_level manually. frame type only matters for motion search and sharpness_level is taken care of in frame_init move function declarations to their proper header Change-Id: I7ef037bd4bf8cf5e37d2d36bd03b5e22a2ad91db
2011-07-20 21:53:42 +02:00
vp8_loop_filter_frame(cm, &pbi->mb);
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 20:08:52 +02:00
}
vp8_yv12_extend_frame_borders_ptr(cm->frame_to_show);
Update loopfilter frame/filter/sharp info for multithread Change I9fd1a5a4 updated the multithreaded loopfilter to avoid reinitializing several parameteres if they haven't changed from the last frame, but the code to update the last frame's parameters wasn't invoked in the multithreaded case. Change-Id: Ia23d937af625c01dd739608e02d110f742b7e1f2
2010-06-30 16:22:40 +02:00
}
Initial WebM release
2010-05-18 17:58:33 +02:00
vp8_clear_system_state();
Adding error-concealment to the decoder. The error-concealer is plugged in after any motion vectors have been decoded. It tries to estimate any missing motion vectors from the motion vectors of the previous frame. Intra blocks with missing residual are replaced with inter blocks with estimated motion vectors. This feature was developed in a separate sandbox (sandbox/holmer/error-concealment). Change-Id: I5c8917b031078d79dbafd90f6006680e84a23412
2011-05-02 15:30:51 +02:00
#if CONFIG_ERROR_CONCEALMENT
/* swap the mode infos to storage for future error concealment */
if (pbi->ec_enabled && pbi->common.prev_mi)
{
const MODE_INFO* tmp = pbi->common.prev_mi;
int row, col;
pbi->common.prev_mi = pbi->common.mi;
pbi->common.mi = tmp;
/* Propagate the segment_ids to the next frame */
for (row = 0; row < pbi->common.mb_rows; ++row)
{
for (col = 0; col < pbi->common.mb_cols; ++col)
{
const int i = row*pbi->common.mode_info_stride + col;
pbi->common.mi[i].mbmi.segment_id =
pbi->common.prev_mi[i].mbmi.segment_id;
}
}
}
#endif
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-28 01:04:02 +02:00
/*vp8_print_modes_and_motion_vectors( cm->mi, cm->mb_rows,cm->mb_cols, cm->current_video_frame);*/
Initial WebM release
2010-05-18 17:58:33 +02:00
if (cm->show_frame)
cm->current_video_frame++;
pbi->ready_for_new_data = 0;
pbi->last_time_stamp = time_stamp;
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
pbi->num_partitions = 0;
pbi->source_sz = 0;
Initial WebM release
2010-05-18 17:58:33 +02:00
#if 0
{
int i;
cosmetics: consistently use [u]int64_t Removes mixed usage of (unsigned) long long and INT64. Fixes Issue #208. Change-Id: I220d3ed5ce4bb1280cd38bb3715f208ce23cf83a
2011-07-26 03:44:59 +02:00
int64_t earliest_time = pbi->dr[0].time_stamp;
int64_t latest_time = pbi->dr[0].time_stamp;
int64_t time_diff = 0;
Initial WebM release
2010-05-18 17:58:33 +02:00
int bytes = 0;
pbi->dr[pbi->common.current_video_frame&0xf].size = pbi->bc.pos + pbi->bc2.pos + 4;;
pbi->dr[pbi->common.current_video_frame&0xf].time_stamp = time_stamp;
for (i = 0; i < 16; i++)
{
bytes += pbi->dr[i].size;
if (pbi->dr[i].time_stamp < earliest_time)
earliest_time = pbi->dr[i].time_stamp;
if (pbi->dr[i].time_stamp > latest_time)
latest_time = pbi->dr[i].time_stamp;
}
time_diff = latest_time - earliest_time;
if (time_diff > 0)
{
pbi->common.bitrate = 80000.00 * bytes / time_diff ;
pbi->common.framerate = 160000000.00 / time_diff ;
}
}
#endif
#if HAVE_ARMV7
Add runtime CPU detection support for ARM. The primary goal is to allow a binary to be built which supports NEON, but can fall back to non-NEON routines, since some Android devices do not have NEON, even if they are otherwise ARMv7 (e.g., Tegra). The configure-generated flags HAVE_ARMV7, etc., are used to decide which versions of each function to build, and when CONFIG_RUNTIME_CPU_DETECT is enabled, the correct version is chosen at run time. In order for this to work, the CFLAGS must be set to something appropriate (e.g., without -mfpu=neon for ARMv7, and with appropriate -march and -mcpu for even earlier configurations), or the native C code will not be able to run. The ASFLAGS must remain set for the most advanced instruction set required at build time, since the ARM assembler will refuse to emit them otherwise. I have not attempted to make any changes to configure to do this automatically. Doing so will probably require the addition of new configure options. Many of the hooks for RTCD on ARM were already there, but a lot of the code had bit-rotted, and a good deal of the ARM-specific code is not integrated into the RTCD structs at all. I did not try to resolve the latter, merely to add the minimal amount of protection around them to allow RTCD to work. Those functions that were called based on an ifdef at the calling site were expanded to check the RTCD flags at that site, but they should be added to an RTCD struct somewhere in the future. The functions invoked with global function pointers still are, but these should be moved into an RTCD struct for thread safety (I believe every platform currently supported has atomic pointer stores, but this is not guaranteed). The encoder's boolhuff functions did not even have _c and armv7 suffixes, and the correct version was resolved at link time. The token packing functions did have appropriate suffixes, but the version was selected with a define, with no associated RTCD struct. However, for both of these, the only armv7 instruction they actually used was rbit, and this was completely superfluous, so I reworked them to avoid it. The only non-ARMv4 instruction remaining in them is clz, which is ARMv5 (not even ARMv5TE is required). Considering that there are no ARM-specific configs which are not at least ARMv5TE, I did not try to detect these at runtime, and simply enable them for ARMv5 and above. Finally, the NEON register saving code was completely non-reentrant, since it saved the registers to a global, static variable. I moved the storage for this onto the stack. A single binary built with this code was tested on an ARM11 (ARMv6) and a Cortex A8 (ARMv7 w/NEON), for both the encoder and decoder, and produced identical output, while using the correct accelerated functions on each. I did not test on any earlier processors. Change-Id: I45cbd63a614f4554c3b325c45d46c0806f009eaa
2010-10-21 00:39:11 +02:00
#if CONFIG_RUNTIME_CPU_DETECT
if (cm->rtcd.flags & HAS_NEON)
#endif
{
vp8_pop_neon(dx_store_reg);
}
Initial WebM release
2010-05-18 17:58:33 +02:00
#endif
pbi->common.error.setjmp = 0;
return retcode;
}
cosmetics: consistently use [u]int64_t Removes mixed usage of (unsigned) long long and INT64. Fixes Issue #208. Change-Id: I220d3ed5ce4bb1280cd38bb3715f208ce23cf83a
2011-07-26 03:44:59 +02:00
int vp8dx_get_raw_frame(VP8D_PTR ptr, YV12_BUFFER_CONFIG *sd, int64_t *time_stamp, int64_t *time_end_stamp, vp8_ppflags_t *flags)
Initial WebM release
2010-05-18 17:58:33 +02:00
{
int ret = -1;
VP8D_COMP *pbi = (VP8D_COMP *) ptr;
if (pbi->ready_for_new_data == 1)
return ret;
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-28 01:04:02 +02:00
/* ie no raw frame to show!!! */
Initial WebM release
2010-05-18 17:58:33 +02:00
if (pbi->common.show_frame == 0)
return ret;
pbi->ready_for_new_data = 1;
*time_stamp = pbi->last_time_stamp;
*time_end_stamp = 0;
sd->clrtype = pbi->common.clr_type;
#if CONFIG_POSTPROC
postproc : Re-work posproc calling to allow more flags. Debugging in postproc needs more flags to allow for specific block types to be turned on or off in the visualizations. Must be enabled with --enable-postproc-visualizer during configuration time. Change-Id: Ia74f357ddc3ad4fb8082afd3a64f62384e4fcb2d
2010-11-05 00:03:36 +01:00
ret = vp8_post_proc_frame(&pbi->common, sd, flags);
Initial WebM release
2010-05-18 17:58:33 +02:00
#else
if (pbi->common.frame_to_show)
{
*sd = *pbi->common.frame_to_show;
sd->y_width = pbi->common.Width;
sd->y_height = pbi->common.Height;
sd->uv_height = pbi->common.Height / 2;
ret = 0;
}
else
{
ret = -1;
}
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-28 01:04:02 +02:00
#endif /*!CONFIG_POSTPROC*/
Initial WebM release
2010-05-18 17:58:33 +02:00
vp8_clear_system_state();
return ret;
}
Reference in New Issue Copy Permalink