vpx/vp8/decoder/decodframe.c

1480 lines
48 KiB
C
Raw Normal View History

2010-05-18 17:58:33 +02:00
/*
* Copyright (c) 2010 The WebM project authors. All Rights Reserved.
2010-05-18 17:58:33 +02:00
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
2010-05-18 17:58:33 +02:00
*/
#include "onyxd_int.h"
#include "vp8/common/header.h"
#include "vp8/common/reconintra.h"
#include "vp8/common/reconintra4x4.h"
#include "vp8/common/recon.h"
#include "vp8/common/reconinter.h"
2010-05-18 17:58:33 +02:00
#include "dequantize.h"
#include "detokenize.h"
#include "vp8/common/invtrans.h"
#include "vp8/common/alloccommon.h"
#include "vp8/common/entropymode.h"
#include "vp8/common/quant_common.h"
#include "vpx_scale/vpxscale.h"
#include "vpx_scale/yv12extend.h"
#include "vp8/common/setupintrarecon.h"
2010-05-18 17:58:33 +02:00
#include "decodemv.h"
#include "vp8/common/extend.h"
#include "vp8/common/modecont.h"
2010-05-18 17:58:33 +02:00
#include "vpx_mem/vpx_mem.h"
#include "vp8/common/idct.h"
2010-05-18 17:58:33 +02:00
#include "dequantize.h"
#include "dboolhuff.h"
2011-10-05 12:26:00 +02:00
#include "vp8/common/seg_common.h"
2010-05-18 17:58:33 +02:00
#include <assert.h>
#include <stdio.h>
#ifdef DEC_DEBUG
int dec_debug = 0;
#endif
2010-05-18 17:58:33 +02:00
void vp8cx_init_de_quantizer(VP8D_COMP *pbi)
{
int i;
int Q;
VP8_COMMON *const pc = & pbi->common;
for (Q = 0; Q < QINDEX_RANGE; Q++)
{
pc->Y1dequant[Q][0] = (short)vp8_dc_quant(Q, pc->y1dc_delta_q);
pc->Y2dequant[Q][0] = (short)vp8_dc2quant(Q, pc->y2dc_delta_q);
pc->UVdequant[Q][0] = (short)vp8_dc_uv_quant(Q, pc->uvdc_delta_q);
2010-05-18 17:58:33 +02:00
/* all the ac values = ; */
2010-05-18 17:58:33 +02:00
for (i = 1; i < 16; i++)
{
int rc = vp8_default_zig_zag1d[i];
pc->Y1dequant[Q][rc] = (short)vp8_ac_yquant(Q);
pc->Y2dequant[Q][rc] = (short)vp8_ac2quant(Q, pc->y2ac_delta_q);
pc->UVdequant[Q][rc] = (short)vp8_ac_uv_quant(Q, pc->uvac_delta_q);
2010-05-18 17:58:33 +02:00
}
}
}
void mb_init_dequantizer(VP8D_COMP *pbi, MACROBLOCKD *xd)
2010-05-18 17:58:33 +02:00
{
int i;
int QIndex;
VP8_COMMON *const pc = & pbi->common;
int segment_id = xd->mode_info_context->mbmi.segment_id;
2010-05-18 17:58:33 +02:00
// Set the Q baseline allowing for any segment level adjustment
2011-10-05 12:26:00 +02:00
if ( segfeature_active( xd, segment_id, SEG_LVL_ALT_Q ) )
2010-05-18 17:58:33 +02:00
{
/* Abs Value */
2010-05-18 17:58:33 +02:00
if (xd->mb_segement_abs_delta == SEGMENT_ABSDATA)
QIndex = get_segdata( xd, segment_id, SEG_LVL_ALT_Q );
2010-05-18 17:58:33 +02:00
/* Delta Value */
2010-05-18 17:58:33 +02:00
else
{
QIndex = pc->base_qindex +
get_segdata( xd, segment_id, SEG_LVL_ALT_Q );
QIndex = (QIndex >= 0) ? ((QIndex <= MAXQ) ? QIndex : MAXQ) : 0; /* Clamp to valid range */
2010-05-18 17:58:33 +02:00
}
}
else
QIndex = pc->base_qindex;
/* Set up the block level dequant pointers */
2010-05-18 17:58:33 +02:00
for (i = 0; i < 16; i++)
{
xd->block[i].dequant = pc->Y1dequant[QIndex];
}
for (i = 16; i < 24; i++)
{
xd->block[i].dequant = pc->UVdequant[QIndex];
}
xd->block[24].dequant = pc->Y2dequant[QIndex];
}
#if CONFIG_RUNTIME_CPU_DETECT
#define RTCD_VTABLE(x) (&(pbi)->common.rtcd.x)
#else
#define RTCD_VTABLE(x) NULL
#endif
/* skip_recon_mb() is Modified: Instead of writing the result to predictor buffer and then copying it
* to dst buffer, we can write the result directly to dst buffer. This eliminates unnecessary copy.
*/
2010-05-18 17:58:33 +02:00
static void skip_recon_mb(VP8D_COMP *pbi, MACROBLOCKD *xd)
{
if (xd->mode_info_context->mbmi.ref_frame == INTRA_FRAME)
2010-05-18 17:58:33 +02:00
{
RECON_INVOKE(&pbi->common.rtcd.recon, build_intra_predictors_mbuv_s)(xd);
RECON_INVOKE(&pbi->common.rtcd.recon,
build_intra_predictors_mby_s)(xd);
2010-05-18 17:58:33 +02:00
}
else
{
vp8_build_inter16x16_predictors_mb(xd, xd->dst.y_buffer,
xd->dst.u_buffer, xd->dst.v_buffer,
xd->dst.y_stride, xd->dst.uv_stride);
if (xd->mode_info_context->mbmi.second_ref_frame)
{
vp8_build_2nd_inter16x16_predictors_mb(xd, xd->dst.y_buffer,
xd->dst.u_buffer, xd->dst.v_buffer,
xd->dst.y_stride, xd->dst.uv_stride);
}
}
#ifdef DEC_DEBUG
if (dec_debug) {
int i, j;
printf("Generating predictors\n");
for (i=0;i<16;i++) {
for (j=0;j<16;j++) printf("%3d ", xd->dst.y_buffer[i*xd->dst.y_stride+j]);
printf("\n");
}
}
#endif
2010-05-18 17:58:33 +02:00
}
extern const int vp8_i8x8_block[4];
static void decode_macroblock(VP8D_COMP *pbi, MACROBLOCKD *xd,
unsigned int mb_idx)
2010-05-18 17:58:33 +02:00
{
int eobtotal = 0;
int throw_residual = 0;
MB_PREDICTION_MODE mode;
int i;
#if CONFIG_T8X8
Improved coding using 8x8 transform In summary, this commit encompasses a series of changes in attempt to improve the 8x8 transform based coding to help overall compression quality, please refer to the detailed commit history below for what are the rationale underly the series of changes: a. A frame level flag to indicate if 8x8 transform is used at all. b. 8x8 transform is not used for key frames and small image size. c. On inter coded frame, macroblocks using modes B_PRED, SPLIT_MV and I8X8_PRED are forced to using 4x4 transform based coding, the rest uses 8x8 transform based coding. d. Encoder and decoder has the same assumption on the relationship between prediction modes and transform size, therefore no signaling is encoded in bitstream. e. Mode decision process now calculate the rate and distortion scores using their respective transforms. Overall test results: 1. HD set http://www.corp.google.com/~yaowu/no_crawl/t8x8/HD_t8x8_20120206.html (avg psnr: 3.09% glb psnr: 3.22%, ssim: 3.90%) 2. Cif set: http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif_t8x8_20120206.html (avg psnr: -0.03%, glb psnr: -0.02%, ssim: -0.04%) It should be noted here, as 8x8 transform coding itself is disabled for cif size clips, the 0.03% loss is purely from the 1 bit/frame flag overhead on if 8x8 transform is used or not for the frame. ---patch history for future reference--- Patch 1: this commit tries to select transform size based on macroblock prediction mode. If the size of a prediction mode is 16x16, then the macroblock is forced to use 8x8 transform. If the prediction mode is B_PRED, SPLITMV or I8X8_PRED, then the macroblock is forced to use 4x4 transform. Tests on the following HD clips showed mixed results: (all hd clips only used first 100 frames in the test) http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8.html http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8_log.html while the results are mixed and overall negative, it is interesting to see 8x8 helped a few of the clips. Patch 2: this patch tries to hard-wire selection of transform size based on prediction modes without using segmentation to signal the transform size. encoder and decoder both takes the same assumption that all macroblocks use 8x8 transform except when prediciton mode is B_PRED, I8X8_PRED or SPLITMV. Test results are as follows: http://www.corp.google.com/~yaowu/no_crawl/t8x8/cifmodebase8x8_0125.html http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8_0125log.html Interestingly, by removing the overhead or coding the segmentation, the results on this limited HD set have turn positive on average. Patch 3: this patch disabled the usage of 8x8 transform on key frames, and kept the logic from patch 2 for inter frames only. test results on HD set turned decidedly positive with 8x8 transform enabled on inter frame with 16x16 prediction modes: (avg psnr: .81% glb psnr: .82 ssim: .55%) http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdintermode8x8_0125.html results on cif set still negative overall Patch 4: continued from last patch, but now in mode decision process, the rate and distortion estimates are computed based on 8x8 transform results for MBs with modes associated with 8x8 transform. This patch also fixed a problem related to segment based eob coding when 8x8 transform is used. The patch significantly improved the results on HD clips: http://www.corp.google.com/~yaowu/no_crawl/t8x8/hd8x8RDintermode.html (avg psnr: 2.70% glb psnr: 2.76% ssim: 3.34%) results on cif also improved, though they are still negative compared to baseline that uses 4x4 transform only: http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif8x8RDintermode.html (avg psnr: -.78% glb psnr: -.86% ssim: -.19%) Patch 5: This patch does 3 things: a. a bunch of decoder bug fixes, encodings and decodings were verified to have matched recon buffer on a number of encodes on cif size mobile and hd version of _pedestrian. b. the patch further improved the rate distortion calculation of MBS that use 8x8 transform. This provided some further gain on compression. c. the patch also got the experimental work SEG_LVL_EOB to work with 8x8 transformed macroblock, test results indicates it improves the cif set but hurt the HD set slightly. Tests results on HD clips: http://www.corp.google.com/~yaowu/no_crawl/t8x8/HD_t8x8_20120201.html (avg psnr: 3.19% glb psnr: 3.30% ssim: 3.93%) Test results on cif clips: http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif_t8x8_20120201.html (avg psnr: -.47% glb psnr: -.51% ssim: +.28%) Patch 6: Added a frame level flag to indicate if 8x8 transform is allowed at all. temporarily the decision is based on frame size, can be optimized later one. This get the cif results to basically unchanged, with one bit per frame overhead on both cif and hd clips. Patch 8: Rebase and Merge to head by PGW. Fixed some suspect 4s that look like hey should be 64s in regard to segmented EOB. Perhaps #defines would be bette. Bulit and tested without T8x8 enabled and produces unchanged output. Patch 9: Corrected misalligned code/decode of "txfm_mode" bit. Limited testing for correct encode and decode with T8x8 configured on derf clips. Change-Id: I156e1405d25f81579d579dff8ab9af53944ec49c
2012-02-10 01:12:23 +01:00
int tx_type;
if( pbi->common.txfm_mode==ONLY_4X4 )
{
xd->mode_info_context->mbmi.txfm_size = TX_4X4;
}
else if( pbi->common.txfm_mode == ALLOW_8X8 )
{
if( xd->mode_info_context->mbmi.mode ==B_PRED
||xd->mode_info_context->mbmi.mode ==I8X8_PRED
||xd->mode_info_context->mbmi.mode ==SPLITMV)
xd->mode_info_context->mbmi.txfm_size = TX_4X4;
else
xd->mode_info_context->mbmi.txfm_size = TX_8X8;
}
tx_type = xd->mode_info_context->mbmi.txfm_size;
#endif
if (xd->mode_info_context->mbmi.mb_skip_coeff)
{
vp8_reset_mb_tokens_context(xd);
}
else if (!vp8dx_bool_error(xd->current_bc))
{
#if CONFIG_T8X8
for(i = 0; i < 25; i++)
{
xd->block[i].eob = 0;
xd->eobs[i] = 0;
}
if ( tx_type == TX_8X8 )
{
eobtotal = vp8_decode_mb_tokens_8x8(pbi, xd);
}
else
#endif
eobtotal = vp8_decode_mb_tokens(pbi, xd);
#ifdef DEC_DEBUG
if (dec_debug) {
printf("\nTokens (%d)\n", eobtotal);
for (i =0; i<400; i++) {
printf("%3d ", xd->qcoeff[i]);
if (i%16 == 15) printf("\n");
}
printf("\n");
}
#endif
}
mode = xd->mode_info_context->mbmi.mode;
if (eobtotal == 0 && mode != B_PRED && mode != SPLITMV
&& mode != I8X8_PRED
&&!vp8dx_bool_error(xd->current_bc)
)
{
/* Special case: Force the loopfilter to skip when eobtotal and
* mb_skip_coeff are zero.
* */
xd->mode_info_context->mbmi.mb_skip_coeff = 1;
skip_recon_mb(pbi, xd);
return;
}
#ifdef DEC_DEBUG
if (dec_debug) {
int i, j;
printf("Generating predictors\n");
for (i=0;i<16;i++) {
for (j=0;j<16;j++) printf("%3d ", xd->dst.y_buffer[i*xd->dst.y_stride+j]);
printf("\n");
}
}
#endif
if (xd->segmentation_enabled)
mb_init_dequantizer(pbi, xd);
/* do prediction */
if (xd->mode_info_context->mbmi.ref_frame == INTRA_FRAME)
2010-05-18 17:58:33 +02:00
{
if(mode != I8X8_PRED)
{
RECON_INVOKE(&pbi->common.rtcd.recon, build_intra_predictors_mbuv)(xd);
if (mode != B_PRED)
{
RECON_INVOKE(&pbi->common.rtcd.recon,
build_intra_predictors_mby)(xd);
} else {
#if !CONFIG_SUPERBLOCKS
vp8_intra_prediction_down_copy(xd);
#endif
}
}
2010-05-18 17:58:33 +02:00
}
else
{
vp8_build_inter_predictors_mb(xd);
}
/* When we have independent partitions we can apply residual even
* though other partitions within the frame are corrupt.
*/
throw_residual = (!pbi->independent_partitions &&
pbi->frame_corrupt_residual);
throw_residual = (throw_residual || vp8dx_bool_error(xd->current_bc));
/* dequantization and idct */
if (mode == I8X8_PRED)
{
for (i = 0; i < 4; i++)
{
int ib = vp8_i8x8_block[i];
const int iblock[4]={0,1,4,5};
int j;
int i8x8mode;
BLOCKD *b;
b = &xd->block[ib];
i8x8mode= b->bmi.as_mode;
RECON_INVOKE(RTCD_VTABLE(recon), intra8x8_predict)
(b, i8x8mode, b->predictor);
for(j = 0; j < 4; j++)
{
b = &xd->block[ib+iblock[j]];
if (xd->eobs[ib+iblock[j]] > 1)
{
DEQUANT_INVOKE(&pbi->dequant, idct_add)
(b->qcoeff, b->dequant, b->predictor,
*(b->base_dst) + b->dst, 16, b->dst_stride);
}
else
{
IDCT_INVOKE(RTCD_VTABLE(idct), idct1_scalar_add)
(b->qcoeff[0] * b->dequant[0], b->predictor,
*(b->base_dst) + b->dst, 16, b->dst_stride);
((int *)b->qcoeff)[0] = 0;
}
}
b = &xd->block[16+i];
RECON_INVOKE(RTCD_VTABLE(recon), intra_uv4x4_predict)
(b, i8x8mode, b->predictor);
DEQUANT_INVOKE(&pbi->dequant, idct_add)
(b->qcoeff, b->dequant, b->predictor,
*(b->base_dst) + b->dst, 8, b->dst_stride);
b = &xd->block[20+i];
RECON_INVOKE(RTCD_VTABLE(recon), intra_uv4x4_predict)
(b, i8x8mode, b->predictor);
DEQUANT_INVOKE(&pbi->dequant, idct_add)
(b->qcoeff, b->dequant, b->predictor,
*(b->base_dst) + b->dst, 8, b->dst_stride);
}
}
else if (mode == B_PRED)
2010-05-18 17:58:33 +02:00
{
for (i = 0; i < 16; i++)
2010-05-18 17:58:33 +02:00
{
BLOCKD *b = &xd->block[i];
int b_mode = xd->mode_info_context->bmi[i].as_mode;
RECON_INVOKE(RTCD_VTABLE(recon), intra4x4_predict)
(b, b_mode, b->predictor);
2010-05-18 17:58:33 +02:00
if (xd->eobs[i] > 1)
2010-05-18 17:58:33 +02:00
{
DEQUANT_INVOKE(&pbi->dequant, idct_add)
(b->qcoeff, b->dequant, b->predictor,
*(b->base_dst) + b->dst, 16, b->dst_stride);
2010-05-18 17:58:33 +02:00
}
else
{
IDCT_INVOKE(RTCD_VTABLE(idct), idct1_scalar_add)
(b->qcoeff[0] * b->dequant[0], b->predictor,
*(b->base_dst) + b->dst, 16, b->dst_stride);
2010-05-18 17:58:33 +02:00
((int *)b->qcoeff)[0] = 0;
}
}
}
else if (mode == SPLITMV)
2010-05-18 17:58:33 +02:00
{
DEQUANT_INVOKE (&pbi->dequant, idct_add_y_block)
(xd->qcoeff, xd->block[0].dequant,
xd->predictor, xd->dst.y_buffer,
xd->dst.y_stride, xd->eobs);
2010-05-18 17:58:33 +02:00
}
else
{
BLOCKD *b = &xd->block[24];
#if CONFIG_T8X8
if( tx_type == TX_8X8 )
{
DEQUANT_INVOKE(&pbi->dequant, block_2x2)(b);
#ifdef DEC_DEBUG
if (dec_debug)
{
int j;
printf("DQcoeff Haar\n");
for (j=0;j<16;j++) {
printf("%d ", b->dqcoeff[j]);
}
printf("\n");
}
#endif
IDCT_INVOKE(RTCD_VTABLE(idct), ihaar2)(&b->dqcoeff[0], b->diff, 8);
((int *)b->qcoeff)[0] = 0;//2nd order block are set to 0 after inverse transform
((int *)b->qcoeff)[1] = 0;
((int *)b->qcoeff)[2] = 0;
((int *)b->qcoeff)[3] = 0;
((int *)b->qcoeff)[4] = 0;
((int *)b->qcoeff)[5] = 0;
((int *)b->qcoeff)[6] = 0;
((int *)b->qcoeff)[7] = 0;
DEQUANT_INVOKE (&pbi->dequant, dc_idct_add_y_block_8x8)
(xd->qcoeff, xd->block[0].dequant,
xd->predictor, xd->dst.y_buffer,
xd->dst.y_stride, xd->eobs, xd->block[24].diff, xd);
}
else
#endif
{
DEQUANT_INVOKE(&pbi->dequant, block)(b);
if (xd->eobs[24] > 1)
{
IDCT_INVOKE(RTCD_VTABLE(idct), iwalsh16)(&b->dqcoeff[0], b->diff);
((int *)b->qcoeff)[0] = 0;
((int *)b->qcoeff)[1] = 0;
((int *)b->qcoeff)[2] = 0;
((int *)b->qcoeff)[3] = 0;
((int *)b->qcoeff)[4] = 0;
((int *)b->qcoeff)[5] = 0;
((int *)b->qcoeff)[6] = 0;
((int *)b->qcoeff)[7] = 0;
}
else
{
IDCT_INVOKE(RTCD_VTABLE(idct), iwalsh1)(&b->dqcoeff[0], b->diff);
((int *)b->qcoeff)[0] = 0;
}
DEQUANT_INVOKE (&pbi->dequant, dc_idct_add_y_block)
(xd->qcoeff, xd->block[0].dequant,
xd->predictor, xd->dst.y_buffer,
xd->dst.y_stride, xd->eobs, xd->block[24].diff);
}
}
#if CONFIG_T8X8
if( tx_type == TX_8X8 )
{
DEQUANT_INVOKE (&pbi->dequant, idct_add_uv_block_8x8)//
(xd->qcoeff+16*16, xd->block[16].dequant,
xd->predictor+16*16, xd->dst.u_buffer, xd->dst.v_buffer,
xd->dst.uv_stride, xd->eobs+16, xd);//
}
else
#endif
if(xd->mode_info_context->mbmi.mode!=I8X8_PRED)
DEQUANT_INVOKE (&pbi->dequant, idct_add_uv_block)
(xd->qcoeff+16*16, xd->block[16].dequant,
xd->predictor+16*16, xd->dst.u_buffer, xd->dst.v_buffer,
xd->dst.uv_stride, xd->eobs+16);
2010-05-18 17:58:33 +02:00
}
2010-05-18 17:58:33 +02:00
2010-05-18 17:58:33 +02:00
static int get_delta_q(vp8_reader *bc, int prev, int *q_update)
{
int ret_val = 0;
if (vp8_read_bit(bc))
{
ret_val = vp8_read_literal(bc, 4);
if (vp8_read_bit(bc))
ret_val = -ret_val;
}
/* Trigger a quantizer update if the delta-q value has changed */
if (ret_val != prev)
*q_update = 1;
return ret_val;
}
#ifdef PACKET_TESTING
#include <stdio.h>
FILE *vpxlog = 0;
#endif
#if CONFIG_SUPERBLOCKS
static void
decode_sb_row(VP8D_COMP *pbi, VP8_COMMON *pc, int mbrow, MACROBLOCKD *xd)
{
int i;
int recon_yoffset, recon_uvoffset;
int mb_row, mb_col;
int ref_fb_idx = pc->lst_fb_idx;
int dst_fb_idx = pc->new_fb_idx;
int recon_y_stride = pc->yv12_fb[ref_fb_idx].y_stride;
int recon_uv_stride = pc->yv12_fb[ref_fb_idx].uv_stride;
int sb_col;
int row_delta[4] = { 0, +1, 0, -1};
int col_delta[4] = {+1, -1, +1, +1};
int sb_cols = (pc->mb_cols + 1)>>1;
ENTROPY_CONTEXT_PLANES left_context[2];
vpx_memset(left_context, 0, sizeof(left_context));
mb_row = mbrow;
mb_col = 0;
for (sb_col=0; sb_col<sb_cols; sb_col++)
{
for ( i=0; i<4; i++ )
{
int dy = row_delta[i];
int dx = col_delta[i];
int offset_extended = dy * xd->mode_info_stride + dx;
if ((mb_row >= pc->mb_rows) || (mb_col >= pc->mb_cols))
{
// Skip on to the next MB
mb_row += dy;
mb_col += dx;
xd->mode_info_context += offset_extended;
continue;
}
// Copy in the appropriate left context
vpx_memcpy (&pc->left_context,
&left_context[(i>>1) & 0x1],
sizeof(ENTROPY_CONTEXT_PLANES));
// reset above block coeffs
xd->above_context = pc->above_context + mb_col;
/* Distance of Mb to the various image edges.
* These are specified to 8th pel as they are always compared to
* values that are in 1/8th pel units
*/
xd->mb_to_top_edge = -((mb_row * 16)) << 3;
xd->mb_to_bottom_edge = ((pc->mb_rows - 1 - mb_row) * 16) << 3;
xd->mb_to_left_edge = -((mb_col * 16) << 3);
xd->mb_to_right_edge = ((pc->mb_cols - 1 - mb_col) * 16) << 3;
xd->up_available = (mb_row != 0);
xd->left_available = (mb_col != 0);
update_blockd_bmi(xd);
recon_yoffset = (mb_row * recon_y_stride * 16) + (mb_col * 16);
recon_uvoffset = (mb_row * recon_uv_stride * 8) + (mb_col * 8);
2010-05-18 17:58:33 +02:00
xd->dst.y_buffer = pc->yv12_fb[dst_fb_idx].y_buffer + recon_yoffset;
xd->dst.u_buffer = pc->yv12_fb[dst_fb_idx].u_buffer + recon_uvoffset;
xd->dst.v_buffer = pc->yv12_fb[dst_fb_idx].v_buffer + recon_uvoffset;
2010-05-18 17:58:33 +02:00
/* Select the appropriate reference frame for this MB */
if (xd->mode_info_context->mbmi.ref_frame == LAST_FRAME)
ref_fb_idx = pc->lst_fb_idx;
else if (xd->mode_info_context->mbmi.ref_frame == GOLDEN_FRAME)
ref_fb_idx = pc->gld_fb_idx;
else
ref_fb_idx = pc->alt_fb_idx;
xd->pre.y_buffer = pc->yv12_fb[ref_fb_idx].y_buffer +recon_yoffset;
xd->pre.u_buffer = pc->yv12_fb[ref_fb_idx].u_buffer +recon_uvoffset;
xd->pre.v_buffer = pc->yv12_fb[ref_fb_idx].v_buffer +recon_uvoffset;
if (xd->mode_info_context->mbmi.second_ref_frame)
{
int second_ref_fb_idx;
/* Select the appropriate reference frame for this MB */
if (xd->mode_info_context->mbmi.second_ref_frame == LAST_FRAME)
second_ref_fb_idx = pc->lst_fb_idx;
else if (xd->mode_info_context->mbmi.second_ref_frame ==
GOLDEN_FRAME)
second_ref_fb_idx = pc->gld_fb_idx;
else
second_ref_fb_idx = pc->alt_fb_idx;
xd->second_pre.y_buffer =
pc->yv12_fb[second_ref_fb_idx].y_buffer + recon_yoffset;
xd->second_pre.u_buffer =
pc->yv12_fb[second_ref_fb_idx].u_buffer + recon_uvoffset;
xd->second_pre.v_buffer =
pc->yv12_fb[second_ref_fb_idx].v_buffer + recon_uvoffset;
}
if (xd->mode_info_context->mbmi.ref_frame != INTRA_FRAME)
{
/* propagate errors from reference frames */
xd->corrupted |= pc->yv12_fb[ref_fb_idx].corrupted;
}
decode_macroblock(pbi, xd, mb_row * pc->mb_cols + mb_col);
/* check if the boolean decoder has suffered an error */
xd->corrupted |= vp8dx_bool_error(xd->current_bc);
// Copy in the appropriate left context
vpx_memcpy (&left_context[(i>>1) & 0x1],
&pc->left_context,
sizeof(ENTROPY_CONTEXT_PLANES));
// skip to next MB
xd->mode_info_context += offset_extended;
mb_row += dy;
mb_col += dx;
}
}
/* skip prediction column */
xd->mode_info_context += 1 - (pc->mb_cols & 0x1) + xd->mode_info_stride;
}
#else
static void
decode_mb_row(VP8D_COMP *pbi, VP8_COMMON *pc, int mb_row, MACROBLOCKD *xd)
2010-05-18 17:58:33 +02:00
{
int recon_yoffset, recon_uvoffset;
int mb_col;
int ref_fb_idx = pc->lst_fb_idx;
int dst_fb_idx = pc->new_fb_idx;
int recon_y_stride = pc->yv12_fb[ref_fb_idx].y_stride;
int recon_uv_stride = pc->yv12_fb[ref_fb_idx].uv_stride;
2010-05-18 17:58:33 +02:00
vpx_memset(&pc->left_context, 0, sizeof(pc->left_context));
2010-05-18 17:58:33 +02:00
recon_yoffset = mb_row * recon_y_stride * 16;
recon_uvoffset = mb_row * recon_uv_stride * 8;
/* reset above block coeffs */
2010-05-18 17:58:33 +02:00
xd->above_context = pc->above_context;
2010-05-18 17:58:33 +02:00
xd->up_available = (mb_row != 0);
xd->mb_to_top_edge = -((mb_row * 16)) << 3;
xd->mb_to_bottom_edge = ((pc->mb_rows - 1 - mb_row) * 16) << 3;
for (mb_col = 0; mb_col < pc->mb_cols; mb_col++)
{
/* Distance of Mb to the various image edges.
* These are specified to 8th pel as they are always compared to values
* that are in 1/8th pel units
*/
xd->mb_to_left_edge = -((mb_col * 16) << 3);
xd->mb_to_right_edge = ((pc->mb_cols - 1 - mb_col) * 16) << 3;
update_blockd_bmi(xd);
xd->dst.y_buffer = pc->yv12_fb[dst_fb_idx].y_buffer + recon_yoffset;
xd->dst.u_buffer = pc->yv12_fb[dst_fb_idx].u_buffer + recon_uvoffset;
xd->dst.v_buffer = pc->yv12_fb[dst_fb_idx].v_buffer + recon_uvoffset;
2010-05-18 17:58:33 +02:00
xd->left_available = (mb_col != 0);
/* Select the appropriate reference frame for this MB */
if (xd->mode_info_context->mbmi.ref_frame == LAST_FRAME)
ref_fb_idx = pc->lst_fb_idx;
else if (xd->mode_info_context->mbmi.ref_frame == GOLDEN_FRAME)
ref_fb_idx = pc->gld_fb_idx;
2010-05-18 17:58:33 +02:00
else
ref_fb_idx = pc->alt_fb_idx;
xd->pre.y_buffer = pc->yv12_fb[ref_fb_idx].y_buffer + recon_yoffset;
xd->pre.u_buffer = pc->yv12_fb[ref_fb_idx].u_buffer + recon_uvoffset;
xd->pre.v_buffer = pc->yv12_fb[ref_fb_idx].v_buffer + recon_uvoffset;
2010-05-18 17:58:33 +02:00
if (xd->mode_info_context->mbmi.second_ref_frame)
{
int second_ref_fb_idx;
/* Select the appropriate reference frame for this MB */
if (xd->mode_info_context->mbmi.second_ref_frame == LAST_FRAME)
second_ref_fb_idx = pc->lst_fb_idx;
else if (xd->mode_info_context->mbmi.second_ref_frame == GOLDEN_FRAME)
second_ref_fb_idx = pc->gld_fb_idx;
else
second_ref_fb_idx = pc->alt_fb_idx;
xd->second_pre.y_buffer = pc->yv12_fb[second_ref_fb_idx].y_buffer + recon_yoffset;
xd->second_pre.u_buffer = pc->yv12_fb[second_ref_fb_idx].u_buffer + recon_uvoffset;
xd->second_pre.v_buffer = pc->yv12_fb[second_ref_fb_idx].v_buffer + recon_uvoffset;
}
if (xd->mode_info_context->mbmi.ref_frame != INTRA_FRAME)
{
/* propagate errors from reference frames */
xd->corrupted |= pc->yv12_fb[ref_fb_idx].corrupted;
}
#ifdef DEC_DEBUG
dec_debug = (pc->current_video_frame==1 && mb_row==4 && mb_col==0);
#endif
decode_macroblock(pbi, xd, mb_row * pc->mb_cols + mb_col);
2010-05-18 17:58:33 +02:00
/* check if the boolean decoder has suffered an error */
xd->corrupted |= vp8dx_bool_error(xd->current_bc);
2010-05-18 17:58:33 +02:00
recon_yoffset += 16;
recon_uvoffset += 8;
++xd->mode_info_context; /* next mb */
xd->above_context++;
2010-05-18 17:58:33 +02:00
}
/* adjust to the next row of mbs */
2010-05-18 17:58:33 +02:00
vp8_extend_mb_row(
&pc->yv12_fb[dst_fb_idx],
2010-05-18 17:58:33 +02:00
xd->dst.y_buffer + 16, xd->dst.u_buffer + 8, xd->dst.v_buffer + 8
);
++xd->mode_info_context; /* skip prediction column */
}
#endif // CONFIG_SUPERBLOCKS
2010-05-18 17:58:33 +02:00
static unsigned int read_partition_size(const unsigned char *cx_size)
{
const unsigned int size =
cx_size[0] + (cx_size[1] << 8) + (cx_size[2] << 16);
return size;
}
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
static void setup_token_decoder_partition_input(VP8D_COMP *pbi)
{
vp8_reader *bool_decoder = &pbi->bc2;
int part_idx = 1;
int num_token_partitions;
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
TOKEN_PARTITION multi_token_partition =
(TOKEN_PARTITION)vp8_read_literal(&pbi->bc, 2);
if (!vp8dx_bool_error(&pbi->bc))
pbi->common.multi_token_partition = multi_token_partition;
num_token_partitions = 1 << pbi->common.multi_token_partition;
if (num_token_partitions + 1 > pbi->num_partitions)
vpx_internal_error(&pbi->common.error, VPX_CODEC_CORRUPT_FRAME,
"Partitions missing");
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
assert(vp8dx_bool_error(&pbi->bc) ||
multi_token_partition == pbi->common.multi_token_partition);
if (pbi->num_partitions > 2)
{
CHECK_MEM_ERROR(pbi->mbc, vpx_malloc((pbi->num_partitions - 1) *
sizeof(vp8_reader)));
bool_decoder = pbi->mbc;
}
for (; part_idx < pbi->num_partitions; ++part_idx)
{
if (vp8dx_start_decode(bool_decoder,
pbi->partitions[part_idx],
pbi->partition_sizes[part_idx]))
vpx_internal_error(&pbi->common.error, VPX_CODEC_MEM_ERROR,
"Failed to allocate bool decoder %d",
part_idx);
bool_decoder++;
}
}
2010-05-18 17:58:33 +02:00
static int read_is_valid(const unsigned char *start,
size_t len,
const unsigned char *end)
{
return (start + len > start && start + len <= end);
}
2010-05-18 17:58:33 +02:00
static void setup_token_decoder(VP8D_COMP *pbi,
const unsigned char *cx_data)
{
int num_part;
int i;
VP8_COMMON *pc = &pbi->common;
const unsigned char *user_data_end = pbi->Source + pbi->source_sz;
vp8_reader *bool_decoder;
const unsigned char *partition;
/* Parse number of token partitions to use */
const TOKEN_PARTITION multi_token_partition =
(TOKEN_PARTITION)vp8_read_literal(&pbi->bc, 2);
/* Only update the multi_token_partition field if we are sure the value
* is correct. */
if (!vp8dx_bool_error(&pbi->bc))
pc->multi_token_partition = multi_token_partition;
2010-05-18 17:58:33 +02:00
num_part = 1 << pc->multi_token_partition;
/* Set up pointers to the first partition */
partition = cx_data;
bool_decoder = &pbi->bc2;
if (num_part > 1)
{
CHECK_MEM_ERROR(pbi->mbc, vpx_malloc(num_part * sizeof(vp8_reader)));
bool_decoder = pbi->mbc;
partition += 3 * (num_part - 1);
}
for (i = 0; i < num_part; i++)
{
const unsigned char *partition_size_ptr = cx_data + i * 3;
ptrdiff_t partition_size, bytes_left;
bytes_left = user_data_end - partition;
2010-05-18 17:58:33 +02:00
/* Calculate the length of this partition. The last partition
* size is implicit. If the partition size can't be read, then
* either use the remaining data in the buffer (for EC mode)
* or throw an error.
2010-05-18 17:58:33 +02:00
*/
if (i < num_part - 1)
{
if (read_is_valid(partition_size_ptr, 3, user_data_end))
partition_size = read_partition_size(partition_size_ptr);
else
vpx_internal_error(&pc->error, VPX_CODEC_CORRUPT_FRAME,
"Truncated partition size data");
2010-05-18 17:58:33 +02:00
}
else
partition_size = bytes_left;
/* Validate the calculated partition length. If the buffer
* described by the partition can't be fully read, then restrict
* it to the portion that can be (for EC mode) or throw an error.
*/
if (!read_is_valid(partition, partition_size, user_data_end))
2010-05-18 17:58:33 +02:00
{
vpx_internal_error(&pc->error, VPX_CODEC_CORRUPT_FRAME,
"Truncated packet or corrupt partition "
"%d length", i + 1);
2010-05-18 17:58:33 +02:00
}
if (vp8dx_start_decode(bool_decoder, partition, partition_size))
2010-05-18 17:58:33 +02:00
vpx_internal_error(&pc->error, VPX_CODEC_MEM_ERROR,
"Failed to allocate bool decoder %d", i + 1);
/* Advance to the next partition */
partition += partition_size;
bool_decoder++;
}
}
static void stop_token_decoder(VP8D_COMP *pbi)
{
VP8_COMMON *pc = &pbi->common;
if (pc->multi_token_partition != ONE_PARTITION)
{
2010-05-18 17:58:33 +02:00
vpx_free(pbi->mbc);
pbi->mbc = NULL;
}
2010-05-18 17:58:33 +02:00
}
static void init_frame(VP8D_COMP *pbi)
{
VP8_COMMON *const pc = & pbi->common;
MACROBLOCKD *const xd = & pbi->mb;
if (pc->frame_type == KEY_FRAME)
{
/* Various keyframe initializations */
2010-05-18 17:58:33 +02:00
vpx_memcpy(pc->fc.mvc, vp8_default_mv_context, sizeof(vp8_default_mv_context));
vp8_init_mbmode_probs(pc);
vp8_default_coef_probs(pc);
vp8_kf_default_bmode_probs(pc->kf_bmode_prob);
// Reset the segment feature data to the default stats:
// Features disabled, 0, with delta coding (Default state).
clearall_segfeatures( xd );
2010-05-18 17:58:33 +02:00
xd->mb_segement_abs_delta = SEGMENT_DELTADATA;
/* reset the mode ref deltasa for loop filter */
2010-05-18 17:58:33 +02:00
vpx_memset(xd->ref_lf_deltas, 0, sizeof(xd->ref_lf_deltas));
vpx_memset(xd->mode_lf_deltas, 0, sizeof(xd->mode_lf_deltas));
/* All buffers are implicitly updated on key frames. */
2010-05-18 17:58:33 +02:00
pc->refresh_golden_frame = 1;
pc->refresh_alt_ref_frame = 1;
pc->copy_buffer_to_gf = 0;
pc->copy_buffer_to_arf = 0;
/* Note that Golden and Altref modes cannot be used on a key frame so
* ref_frame_sign_bias[] is undefined and meaningless
*/
2010-05-18 17:58:33 +02:00
pc->ref_frame_sign_bias[GOLDEN_FRAME] = 0;
pc->ref_frame_sign_bias[ALTREF_FRAME] = 0;
vpx_memcpy(&pc->lfc, &pc->fc, sizeof(pc->fc));
vpx_memcpy(&pc->lfc_a, &pc->fc, sizeof(pc->fc));
vp8_init_mode_contexts(&pbi->common);
vpx_memcpy( pbi->common.vp8_mode_contexts,
pbi->common.mode_context,
sizeof(pbi->common.mode_context));
2010-05-18 17:58:33 +02:00
}
else
{
2010-05-18 17:58:33 +02:00
if (!pc->use_bilinear_mc_filter)
pc->mcomp_filter_type = SIXTAP;
else
pc->mcomp_filter_type = BILINEAR;
/* To enable choice of different interploation filters */
2010-05-18 17:58:33 +02:00
if (pc->mcomp_filter_type == SIXTAP)
{
xd->subpixel_predict = SUBPIX_INVOKE(RTCD_VTABLE(subpix), sixtap4x4);
xd->subpixel_predict8x4 = SUBPIX_INVOKE(RTCD_VTABLE(subpix), sixtap8x4);
xd->subpixel_predict8x8 = SUBPIX_INVOKE(RTCD_VTABLE(subpix), sixtap8x8);
xd->subpixel_predict16x16 = SUBPIX_INVOKE(RTCD_VTABLE(subpix), sixtap16x16);
xd->subpixel_predict_avg8x8 = SUBPIX_INVOKE(RTCD_VTABLE(subpix), sixtap_avg8x8);
xd->subpixel_predict_avg16x16 = SUBPIX_INVOKE(RTCD_VTABLE(subpix), sixtap_avg16x16);
2010-05-18 17:58:33 +02:00
}
else
{
xd->subpixel_predict = SUBPIX_INVOKE(RTCD_VTABLE(subpix), bilinear4x4);
xd->subpixel_predict8x4 = SUBPIX_INVOKE(RTCD_VTABLE(subpix), bilinear8x4);
xd->subpixel_predict8x8 = SUBPIX_INVOKE(RTCD_VTABLE(subpix), bilinear8x8);
xd->subpixel_predict16x16 = SUBPIX_INVOKE(RTCD_VTABLE(subpix), bilinear16x16);
xd->subpixel_predict_avg8x8 = SUBPIX_INVOKE(RTCD_VTABLE(subpix), bilinear_avg8x8);
xd->subpixel_predict_avg16x16 = SUBPIX_INVOKE(RTCD_VTABLE(subpix), bilinear_avg16x16);
2010-05-18 17:58:33 +02:00
}
}
xd->left_context = &pc->left_context;
2010-05-18 17:58:33 +02:00
xd->mode_info_context = pc->mi;
xd->frame_type = pc->frame_type;
xd->mode_info_context->mbmi.mode = DC_PRED;
2010-05-18 17:58:33 +02:00
xd->mode_info_stride = pc->mode_info_stride;
xd->corrupted = 0; /* init without corruption */
xd->fullpixel_mask = 0xffffffff;
if(pc->full_pixel)
xd->fullpixel_mask = 0xfffffff8;
2010-05-18 17:58:33 +02:00
}
int vp8_decode_frame(VP8D_COMP *pbi)
{
vp8_reader *const bc = & pbi->bc;
VP8_COMMON *const pc = & pbi->common;
MACROBLOCKD *const xd = & pbi->mb;
const unsigned char *data = (const unsigned char *)pbi->Source;
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
const unsigned char *data_end = data + pbi->source_sz;
ptrdiff_t first_partition_length_in_bytes;
2010-05-18 17:58:33 +02:00
int mb_row;
int i, j, k, l;
int corrupt_tokens = 0;
int prev_independent_partitions = pbi->independent_partitions;
2010-05-18 17:58:33 +02:00
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
if (pbi->input_partition)
{
data = pbi->partitions[0];
data_end = data + pbi->partition_sizes[0];
}
/* start with no corruption of current frame */
xd->corrupted = 0;
pc->yv12_fb[pc->new_fb_idx].corrupted = 0;
if (data_end - data < 3)
2010-05-18 17:58:33 +02:00
{
vpx_internal_error(&pc->error, VPX_CODEC_CORRUPT_FRAME,
"Truncated packet");
}
else
{
pc->frame_type = (FRAME_TYPE)(data[0] & 1);
pc->version = (data[0] >> 1) & 7;
pc->show_frame = (data[0] >> 4) & 1;
first_partition_length_in_bytes =
(data[0] | (data[1] << 8) | (data[2] << 16)) >> 5;
2010-05-18 17:58:33 +02:00
if ((data + first_partition_length_in_bytes > data_end
|| data + first_partition_length_in_bytes < data))
vpx_internal_error(&pc->error, VPX_CODEC_CORRUPT_FRAME,
"Truncated packet or corrupt partition 0 length");
data += 3;
vp8_setup_version(pc);
2010-05-18 17:58:33 +02:00
if (pc->frame_type == KEY_FRAME)
2010-05-18 17:58:33 +02:00
{
const int Width = pc->Width;
const int Height = pc->Height;
/* vet via sync code */
/* When error concealment is enabled we should only check the sync
* code if we have enough bits available
*/
if (data + 3 < data_end)
2010-05-18 17:58:33 +02:00
{
if (data[0] != 0x9d || data[1] != 0x01 || data[2] != 0x2a)
vpx_internal_error(&pc->error, VPX_CODEC_UNSUP_BITSTREAM,
"Invalid frame sync code");
2010-05-18 17:58:33 +02:00
}
/* If error concealment is enabled we should only parse the new size
* if we have enough data. Otherwise we will end up with the wrong
* size.
*/
if (data + 6 < data_end)
2010-05-18 17:58:33 +02:00
{
pc->Width = (data[3] | (data[4] << 8)) & 0x3fff;
pc->horiz_scale = data[4] >> 6;
pc->Height = (data[5] | (data[6] << 8)) & 0x3fff;
pc->vert_scale = data[6] >> 6;
2010-05-18 17:58:33 +02:00
}
data += 7;
if (Width != pc->Width || Height != pc->Height)
{
int prev_mb_rows = pc->mb_rows;
if (pc->Width <= 0)
{
pc->Width = Width;
vpx_internal_error(&pc->error, VPX_CODEC_CORRUPT_FRAME,
"Invalid frame width");
}
if (pc->Height <= 0)
{
pc->Height = Height;
vpx_internal_error(&pc->error, VPX_CODEC_CORRUPT_FRAME,
"Invalid frame height");
}
2010-05-18 17:58:33 +02:00
if (vp8_alloc_frame_buffers(pc, pc->Width, pc->Height))
vpx_internal_error(&pc->error, VPX_CODEC_MEM_ERROR,
"Failed to allocate frame buffers");
}
2010-05-18 17:58:33 +02:00
}
}
if ((!pbi->decoded_key_frame && pc->frame_type != KEY_FRAME) ||
pc->Width == 0 || pc->Height == 0)
2010-05-18 17:58:33 +02:00
{
return -1;
}
init_frame(pbi);
if (vp8dx_start_decode(bc, data, data_end - data))
2010-05-18 17:58:33 +02:00
vpx_internal_error(&pc->error, VPX_CODEC_MEM_ERROR,
"Failed to allocate bool decoder 0");
if (pc->frame_type == KEY_FRAME) {
pc->clr_type = (YUV_TYPE)vp8_read_bit(bc);
pc->clamp_type = (CLAMP_TYPE)vp8_read_bit(bc);
}
/* Is segmentation enabled */
2010-05-18 17:58:33 +02:00
xd->segmentation_enabled = (unsigned char)vp8_read_bit(bc);
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 18:29:54 +01:00
2010-05-18 17:58:33 +02:00
if (xd->segmentation_enabled)
{
// Read whether or not the segmentation map is being explicitly
// updated this frame.
2010-05-18 17:58:33 +02:00
xd->update_mb_segmentation_map = (unsigned char)vp8_read_bit(bc);
// If so what method will be used.
if ( xd->update_mb_segmentation_map )
pc->temporal_update = (unsigned char)vp8_read_bit(bc);
// Is the segment data being updated
2010-05-18 17:58:33 +02:00
xd->update_mb_segmentation_data = (unsigned char)vp8_read_bit(bc);
if (xd->update_mb_segmentation_data)
{
int data;
2010-05-18 17:58:33 +02:00
xd->mb_segement_abs_delta = (unsigned char)vp8_read_bit(bc);
clearall_segfeatures( xd );
// For each segmentation...
for (i = 0; i < MAX_MB_SEGMENTS; i++)
{
// For each of the segments features...
for (j = 0; j < SEG_LVL_MAX; j++)
2010-05-18 17:58:33 +02:00
{
#if CONFIG_FEATUREUPDATES
// feature updated?
if (vp8_read_bit(bc))
{
int active=1;
if ( segfeature_active( xd, i, j ))
active=vp8_read_bit(bc);
// Is the feature enabled
if (active)
{
// Update the feature data and mask
enable_segfeature(xd, i, j);
data = (signed char)vp8_read_literal(
bc, seg_feature_data_bits(j));
// Is the segment data signed..
if ( is_segfeature_signed(j) )
{
if (vp8_read_bit(bc))
data = - data;
}
}
else
data = 0;
set_segdata(xd, i, j, data);
}
#else
// Is the feature enabled
2010-05-18 17:58:33 +02:00
if (vp8_read_bit(bc))
{
// Update the feature data and mask
enable_segfeature(xd, i, j);
2010-05-18 17:58:33 +02:00
data = (signed char)vp8_read_literal(
bc, seg_feature_data_bits(j));
// Is the segment data signed..
if ( is_segfeature_signed(j) )
{
if (vp8_read_bit(bc))
data = - data;
}
2010-05-18 17:58:33 +02:00
}
else
data = 0;
set_segdata(xd, i, j, data);
#endif
2010-05-18 17:58:33 +02:00
}
}
}
if (xd->update_mb_segmentation_map)
{
// Which macro block level features are enabled
Further work on Segmentation Experiment: This check in includes quite a lot of clean up and refactoring. Most of the analysis and set up for the different coding options for the segment map (currently simple distribution based coding or temporaly predicted coding), has been moved to one location (the function choose_segmap_coding_method() in segmenation.c). This code was previously scattered around in various locations making integration with other experiments and modification / debug more difficult. Currently the functionality is as it was with the exception that the prediction probabilities are now only transmitted when the temporal prediction mode is selected. There is still quite a bit more clean up work that will be possible when the #ifdef is removed. Also at that time I may rename and alter the sense of macroblock based variable "segment_flag" which indicates (1 that the segmnet id is not predicted vs 0 that it is predicted). I also intend to experiment with a spatial prediction mode that can be used when coding a key frame segment map or in cases where temporal prediction does not work well but there is spatial correlation. In a later check in when the ifdefs have gone I may also move the call to choose_segmap_coding_method() to just before where the bitsream is packed (currently it is in vp8_encode_frame()) to further reduce the possibility of clashes with other experiments and prevent it being called on each itteration of the recode loop. Change-Id: I3d4aba2a2826ec21f367678d5b07c1d1c36db168
2011-11-15 12:13:33 +01:00
vpx_memset(xd->mb_segment_tree_probs, 255,
sizeof(xd->mb_segment_tree_probs));
vpx_memset(pc->segment_pred_probs, 255,
sizeof(pc->segment_pred_probs));
Further work on Segmentation Experiment: This check in includes quite a lot of clean up and refactoring. Most of the analysis and set up for the different coding options for the segment map (currently simple distribution based coding or temporaly predicted coding), has been moved to one location (the function choose_segmap_coding_method() in segmenation.c). This code was previously scattered around in various locations making integration with other experiments and modification / debug more difficult. Currently the functionality is as it was with the exception that the prediction probabilities are now only transmitted when the temporal prediction mode is selected. There is still quite a bit more clean up work that will be possible when the #ifdef is removed. Also at that time I may rename and alter the sense of macroblock based variable "segment_flag" which indicates (1 that the segmnet id is not predicted vs 0 that it is predicted). I also intend to experiment with a spatial prediction mode that can be used when coding a key frame segment map or in cases where temporal prediction does not work well but there is spatial correlation. In a later check in when the ifdefs have gone I may also move the call to choose_segmap_coding_method() to just before where the bitsream is packed (currently it is in vp8_encode_frame()) to further reduce the possibility of clashes with other experiments and prevent it being called on each itteration of the recode loop. Change-Id: I3d4aba2a2826ec21f367678d5b07c1d1c36db168
2011-11-15 12:13:33 +01:00
// Read the probs used to decode the segment id for each macro
// block.
2010-05-18 17:58:33 +02:00
for (i = 0; i < MB_FEATURE_TREE_PROBS; i++)
{
Further work on Segmentation Experiment: This check in includes quite a lot of clean up and refactoring. Most of the analysis and set up for the different coding options for the segment map (currently simple distribution based coding or temporaly predicted coding), has been moved to one location (the function choose_segmap_coding_method() in segmenation.c). This code was previously scattered around in various locations making integration with other experiments and modification / debug more difficult. Currently the functionality is as it was with the exception that the prediction probabilities are now only transmitted when the temporal prediction mode is selected. There is still quite a bit more clean up work that will be possible when the #ifdef is removed. Also at that time I may rename and alter the sense of macroblock based variable "segment_flag" which indicates (1 that the segmnet id is not predicted vs 0 that it is predicted). I also intend to experiment with a spatial prediction mode that can be used when coding a key frame segment map or in cases where temporal prediction does not work well but there is spatial correlation. In a later check in when the ifdefs have gone I may also move the call to choose_segmap_coding_method() to just before where the bitsream is packed (currently it is in vp8_encode_frame()) to further reduce the possibility of clashes with other experiments and prevent it being called on each itteration of the recode loop. Change-Id: I3d4aba2a2826ec21f367678d5b07c1d1c36db168
2011-11-15 12:13:33 +01:00
// If not explicitly set value is defaulted to 255 by
//memset above
2010-05-18 17:58:33 +02:00
if (vp8_read_bit(bc))
Further work on Segmentation Experiment: This check in includes quite a lot of clean up and refactoring. Most of the analysis and set up for the different coding options for the segment map (currently simple distribution based coding or temporaly predicted coding), has been moved to one location (the function choose_segmap_coding_method() in segmenation.c). This code was previously scattered around in various locations making integration with other experiments and modification / debug more difficult. Currently the functionality is as it was with the exception that the prediction probabilities are now only transmitted when the temporal prediction mode is selected. There is still quite a bit more clean up work that will be possible when the #ifdef is removed. Also at that time I may rename and alter the sense of macroblock based variable "segment_flag" which indicates (1 that the segmnet id is not predicted vs 0 that it is predicted). I also intend to experiment with a spatial prediction mode that can be used when coding a key frame segment map or in cases where temporal prediction does not work well but there is spatial correlation. In a later check in when the ifdefs have gone I may also move the call to choose_segmap_coding_method() to just before where the bitsream is packed (currently it is in vp8_encode_frame()) to further reduce the possibility of clashes with other experiments and prevent it being called on each itteration of the recode loop. Change-Id: I3d4aba2a2826ec21f367678d5b07c1d1c36db168
2011-11-15 12:13:33 +01:00
xd->mb_segment_tree_probs[i] =
(vp8_prob)vp8_read_literal(bc, 8);
2010-05-18 17:58:33 +02:00
}
Further work on Segmentation Experiment: This check in includes quite a lot of clean up and refactoring. Most of the analysis and set up for the different coding options for the segment map (currently simple distribution based coding or temporaly predicted coding), has been moved to one location (the function choose_segmap_coding_method() in segmenation.c). This code was previously scattered around in various locations making integration with other experiments and modification / debug more difficult. Currently the functionality is as it was with the exception that the prediction probabilities are now only transmitted when the temporal prediction mode is selected. There is still quite a bit more clean up work that will be possible when the #ifdef is removed. Also at that time I may rename and alter the sense of macroblock based variable "segment_flag" which indicates (1 that the segmnet id is not predicted vs 0 that it is predicted). I also intend to experiment with a spatial prediction mode that can be used when coding a key frame segment map or in cases where temporal prediction does not work well but there is spatial correlation. In a later check in when the ifdefs have gone I may also move the call to choose_segmap_coding_method() to just before where the bitsream is packed (currently it is in vp8_encode_frame()) to further reduce the possibility of clashes with other experiments and prevent it being called on each itteration of the recode loop. Change-Id: I3d4aba2a2826ec21f367678d5b07c1d1c36db168
2011-11-15 12:13:33 +01:00
// If predictive coding of segment map is enabled read the
// prediction probabilities.
if ( pc->temporal_update )
Further work on Segmentation Experiment: This check in includes quite a lot of clean up and refactoring. Most of the analysis and set up for the different coding options for the segment map (currently simple distribution based coding or temporaly predicted coding), has been moved to one location (the function choose_segmap_coding_method() in segmenation.c). This code was previously scattered around in various locations making integration with other experiments and modification / debug more difficult. Currently the functionality is as it was with the exception that the prediction probabilities are now only transmitted when the temporal prediction mode is selected. There is still quite a bit more clean up work that will be possible when the #ifdef is removed. Also at that time I may rename and alter the sense of macroblock based variable "segment_flag" which indicates (1 that the segmnet id is not predicted vs 0 that it is predicted). I also intend to experiment with a spatial prediction mode that can be used when coding a key frame segment map or in cases where temporal prediction does not work well but there is spatial correlation. In a later check in when the ifdefs have gone I may also move the call to choose_segmap_coding_method() to just before where the bitsream is packed (currently it is in vp8_encode_frame()) to further reduce the possibility of clashes with other experiments and prevent it being called on each itteration of the recode loop. Change-Id: I3d4aba2a2826ec21f367678d5b07c1d1c36db168
2011-11-15 12:13:33 +01:00
{
// Read the prediction probs needed to decode the segment id
// when predictive coding enabled
for (i = 0; i < PREDICTION_PROBS; i++)
Further work on Segmentation Experiment: This check in includes quite a lot of clean up and refactoring. Most of the analysis and set up for the different coding options for the segment map (currently simple distribution based coding or temporaly predicted coding), has been moved to one location (the function choose_segmap_coding_method() in segmenation.c). This code was previously scattered around in various locations making integration with other experiments and modification / debug more difficult. Currently the functionality is as it was with the exception that the prediction probabilities are now only transmitted when the temporal prediction mode is selected. There is still quite a bit more clean up work that will be possible when the #ifdef is removed. Also at that time I may rename and alter the sense of macroblock based variable "segment_flag" which indicates (1 that the segmnet id is not predicted vs 0 that it is predicted). I also intend to experiment with a spatial prediction mode that can be used when coding a key frame segment map or in cases where temporal prediction does not work well but there is spatial correlation. In a later check in when the ifdefs have gone I may also move the call to choose_segmap_coding_method() to just before where the bitsream is packed (currently it is in vp8_encode_frame()) to further reduce the possibility of clashes with other experiments and prevent it being called on each itteration of the recode loop. Change-Id: I3d4aba2a2826ec21f367678d5b07c1d1c36db168
2011-11-15 12:13:33 +01:00
{
// If not explicitly set value is defaulted to 255 by
// memset above
if (vp8_read_bit(bc))
pc->segment_pred_probs[i] =
Further work on Segmentation Experiment: This check in includes quite a lot of clean up and refactoring. Most of the analysis and set up for the different coding options for the segment map (currently simple distribution based coding or temporaly predicted coding), has been moved to one location (the function choose_segmap_coding_method() in segmenation.c). This code was previously scattered around in various locations making integration with other experiments and modification / debug more difficult. Currently the functionality is as it was with the exception that the prediction probabilities are now only transmitted when the temporal prediction mode is selected. There is still quite a bit more clean up work that will be possible when the #ifdef is removed. Also at that time I may rename and alter the sense of macroblock based variable "segment_flag" which indicates (1 that the segmnet id is not predicted vs 0 that it is predicted). I also intend to experiment with a spatial prediction mode that can be used when coding a key frame segment map or in cases where temporal prediction does not work well but there is spatial correlation. In a later check in when the ifdefs have gone I may also move the call to choose_segmap_coding_method() to just before where the bitsream is packed (currently it is in vp8_encode_frame()) to further reduce the possibility of clashes with other experiments and prevent it being called on each itteration of the recode loop. Change-Id: I3d4aba2a2826ec21f367678d5b07c1d1c36db168
2011-11-15 12:13:33 +01:00
(vp8_prob)vp8_read_literal(bc, 8);
}
}
2010-05-18 17:58:33 +02:00
}
}
// Read common prediction model status flag probability updates for the
// reference frame
if ( pc->frame_type == KEY_FRAME )
{
// Set the prediction probabilities to defaults
pc->ref_pred_probs[0] = 120;
pc->ref_pred_probs[1] = 80;
pc->ref_pred_probs[2] = 40;
}
else
{
for (i = 0; i < PREDICTION_PROBS; i++)
{
if ( vp8_read_bit(bc) )
pc->ref_pred_probs[i] = (vp8_prob)vp8_read_literal(bc, 8);
}
}
/* Read the loop filter level and type */
Improved coding using 8x8 transform In summary, this commit encompasses a series of changes in attempt to improve the 8x8 transform based coding to help overall compression quality, please refer to the detailed commit history below for what are the rationale underly the series of changes: a. A frame level flag to indicate if 8x8 transform is used at all. b. 8x8 transform is not used for key frames and small image size. c. On inter coded frame, macroblocks using modes B_PRED, SPLIT_MV and I8X8_PRED are forced to using 4x4 transform based coding, the rest uses 8x8 transform based coding. d. Encoder and decoder has the same assumption on the relationship between prediction modes and transform size, therefore no signaling is encoded in bitstream. e. Mode decision process now calculate the rate and distortion scores using their respective transforms. Overall test results: 1. HD set http://www.corp.google.com/~yaowu/no_crawl/t8x8/HD_t8x8_20120206.html (avg psnr: 3.09% glb psnr: 3.22%, ssim: 3.90%) 2. Cif set: http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif_t8x8_20120206.html (avg psnr: -0.03%, glb psnr: -0.02%, ssim: -0.04%) It should be noted here, as 8x8 transform coding itself is disabled for cif size clips, the 0.03% loss is purely from the 1 bit/frame flag overhead on if 8x8 transform is used or not for the frame. ---patch history for future reference--- Patch 1: this commit tries to select transform size based on macroblock prediction mode. If the size of a prediction mode is 16x16, then the macroblock is forced to use 8x8 transform. If the prediction mode is B_PRED, SPLITMV or I8X8_PRED, then the macroblock is forced to use 4x4 transform. Tests on the following HD clips showed mixed results: (all hd clips only used first 100 frames in the test) http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8.html http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8_log.html while the results are mixed and overall negative, it is interesting to see 8x8 helped a few of the clips. Patch 2: this patch tries to hard-wire selection of transform size based on prediction modes without using segmentation to signal the transform size. encoder and decoder both takes the same assumption that all macroblocks use 8x8 transform except when prediciton mode is B_PRED, I8X8_PRED or SPLITMV. Test results are as follows: http://www.corp.google.com/~yaowu/no_crawl/t8x8/cifmodebase8x8_0125.html http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8_0125log.html Interestingly, by removing the overhead or coding the segmentation, the results on this limited HD set have turn positive on average. Patch 3: this patch disabled the usage of 8x8 transform on key frames, and kept the logic from patch 2 for inter frames only. test results on HD set turned decidedly positive with 8x8 transform enabled on inter frame with 16x16 prediction modes: (avg psnr: .81% glb psnr: .82 ssim: .55%) http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdintermode8x8_0125.html results on cif set still negative overall Patch 4: continued from last patch, but now in mode decision process, the rate and distortion estimates are computed based on 8x8 transform results for MBs with modes associated with 8x8 transform. This patch also fixed a problem related to segment based eob coding when 8x8 transform is used. The patch significantly improved the results on HD clips: http://www.corp.google.com/~yaowu/no_crawl/t8x8/hd8x8RDintermode.html (avg psnr: 2.70% glb psnr: 2.76% ssim: 3.34%) results on cif also improved, though they are still negative compared to baseline that uses 4x4 transform only: http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif8x8RDintermode.html (avg psnr: -.78% glb psnr: -.86% ssim: -.19%) Patch 5: This patch does 3 things: a. a bunch of decoder bug fixes, encodings and decodings were verified to have matched recon buffer on a number of encodes on cif size mobile and hd version of _pedestrian. b. the patch further improved the rate distortion calculation of MBS that use 8x8 transform. This provided some further gain on compression. c. the patch also got the experimental work SEG_LVL_EOB to work with 8x8 transformed macroblock, test results indicates it improves the cif set but hurt the HD set slightly. Tests results on HD clips: http://www.corp.google.com/~yaowu/no_crawl/t8x8/HD_t8x8_20120201.html (avg psnr: 3.19% glb psnr: 3.30% ssim: 3.93%) Test results on cif clips: http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif_t8x8_20120201.html (avg psnr: -.47% glb psnr: -.51% ssim: +.28%) Patch 6: Added a frame level flag to indicate if 8x8 transform is allowed at all. temporarily the decision is based on frame size, can be optimized later one. This get the cif results to basically unchanged, with one bit per frame overhead on both cif and hd clips. Patch 8: Rebase and Merge to head by PGW. Fixed some suspect 4s that look like hey should be 64s in regard to segmented EOB. Perhaps #defines would be bette. Bulit and tested without T8x8 enabled and produces unchanged output. Patch 9: Corrected misalligned code/decode of "txfm_mode" bit. Limited testing for correct encode and decode with T8x8 configured on derf clips. Change-Id: I156e1405d25f81579d579dff8ab9af53944ec49c
2012-02-10 01:12:23 +01:00
#if CONFIG_T8X8
pc->txfm_mode = (TXFM_MODE) vp8_read_bit(bc);
#endif
2010-05-18 17:58:33 +02:00
pc->filter_type = (LOOPFILTERTYPE) vp8_read_bit(bc);
pc->filter_level = vp8_read_literal(bc, 6);
pc->sharpness_level = vp8_read_literal(bc, 3);
/* Read in loop filter deltas applied at the MB level based on mode or ref frame. */
2010-05-18 17:58:33 +02:00
xd->mode_ref_lf_delta_update = 0;
xd->mode_ref_lf_delta_enabled = (unsigned char)vp8_read_bit(bc);
if (xd->mode_ref_lf_delta_enabled)
{
/* Do the deltas need to be updated */
2010-05-18 17:58:33 +02:00
xd->mode_ref_lf_delta_update = (unsigned char)vp8_read_bit(bc);
if (xd->mode_ref_lf_delta_update)
{
/* Send update */
2010-05-18 17:58:33 +02:00
for (i = 0; i < MAX_REF_LF_DELTAS; i++)
{
if (vp8_read_bit(bc))
{
/*sign = vp8_read_bit( bc );*/
2010-05-18 17:58:33 +02:00
xd->ref_lf_deltas[i] = (signed char)vp8_read_literal(bc, 6);
if (vp8_read_bit(bc)) /* Apply sign */
2010-05-18 17:58:33 +02:00
xd->ref_lf_deltas[i] = xd->ref_lf_deltas[i] * -1;
}
}
/* Send update */
2010-05-18 17:58:33 +02:00
for (i = 0; i < MAX_MODE_LF_DELTAS; i++)
{
if (vp8_read_bit(bc))
{
/*sign = vp8_read_bit( bc );*/
2010-05-18 17:58:33 +02:00
xd->mode_lf_deltas[i] = (signed char)vp8_read_literal(bc, 6);
if (vp8_read_bit(bc)) /* Apply sign */
2010-05-18 17:58:33 +02:00
xd->mode_lf_deltas[i] = xd->mode_lf_deltas[i] * -1;
}
}
}
}
New ways of passing encoded data between encoder and decoder. With this commit frames can be received partition-by-partition from the encoder and passed partition-by-partition to the decoder. At the encoder-side this makes it easier to split encoded frames at partition boundaries, useful when packetizing frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled, several VPX_CODEC_CX_FRAME_PKT packets will be returned from vpx_codec_get_cx_data(), containing one partition each. The partition_id (starting at 0) specifies the decoding order of the partitions. All partitions but the last has the VPX_FRAME_IS_FRAGMENT flag set. At the decoder this opens up the possibility of decoding partition N even though partition N-1 was lost (given that independent partitioning has been enabled in the encoder) if more info about the missing parts of the stream is available through external signaling. Each partition is passed to the decoder through the vpx_codec_decode() function, with the data pointer pointing to the start of the partition, and with data_sz equal to the size of the partition. Missing partitions can be signaled to the decoder by setting data != NULL and data_sz = 0. When all partitions have been given to the decoder "end of data" should be signaled by calling vpx_codec_decode() with data = NULL and data_sz = 0. The first partition is the first partition according to the VP8 bitstream + the uncompressed data chunk + DCT address offsets if multiple residual partitions are used. Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
2011-06-13 16:42:27 +02:00
if (pbi->input_partition)
{
setup_token_decoder_partition_input(pbi);
}
else
{
setup_token_decoder(pbi, data + first_partition_length_in_bytes);
}
2010-05-18 17:58:33 +02:00
xd->current_bc = &pbi->bc2;
/* Read the default quantizers. */
2010-05-18 17:58:33 +02:00
{
int Q, q_update;
Q = vp8_read_literal(bc, QINDEX_BITS); /* AC 1st order Q = default */
2010-05-18 17:58:33 +02:00
pc->base_qindex = Q;
q_update = 0;
pc->y1dc_delta_q = get_delta_q(bc, pc->y1dc_delta_q, &q_update);
pc->y2dc_delta_q = get_delta_q(bc, pc->y2dc_delta_q, &q_update);
pc->y2ac_delta_q = get_delta_q(bc, pc->y2ac_delta_q, &q_update);
pc->uvdc_delta_q = get_delta_q(bc, pc->uvdc_delta_q, &q_update);
pc->uvac_delta_q = get_delta_q(bc, pc->uvac_delta_q, &q_update);
if (q_update)
vp8cx_init_de_quantizer(pbi);
/* MB level dequantizer setup */
2010-05-18 17:58:33 +02:00
mb_init_dequantizer(pbi, &pbi->mb);
}
/* Determine if the golden frame or ARF buffer should be updated and how.
* For all non key frames the GF and ARF refresh flags and sign bias
* flags must be set explicitly.
*/
2010-05-18 17:58:33 +02:00
if (pc->frame_type != KEY_FRAME)
{
/* Should the GF or ARF be updated from the current frame */
2010-05-18 17:58:33 +02:00
pc->refresh_golden_frame = vp8_read_bit(bc);
pc->refresh_alt_ref_frame = vp8_read_bit(bc);
if(pc->refresh_alt_ref_frame)
{
vpx_memcpy(&pc->fc, &pc->lfc_a, sizeof(pc->fc));
vpx_memcpy( pc->vp8_mode_contexts,
pc->mode_context_a,
sizeof(pc->vp8_mode_contexts));
}
else
{
vpx_memcpy(&pc->fc, &pc->lfc, sizeof(pc->fc));
vpx_memcpy( pc->vp8_mode_contexts,
pc->mode_context,
sizeof(pc->vp8_mode_contexts));
}
/* Buffer to buffer copy flags. */
2010-05-18 17:58:33 +02:00
pc->copy_buffer_to_gf = 0;
if (!pc->refresh_golden_frame)
pc->copy_buffer_to_gf = vp8_read_literal(bc, 2);
pc->copy_buffer_to_arf = 0;
if (!pc->refresh_alt_ref_frame)
pc->copy_buffer_to_arf = vp8_read_literal(bc, 2);
pc->ref_frame_sign_bias[GOLDEN_FRAME] = vp8_read_bit(bc);
pc->ref_frame_sign_bias[ALTREF_FRAME] = vp8_read_bit(bc);
Supporting high precision 1/8-pel motion vectors This is the initial patch for supporting 1/8th pel motion. Currently if we configure with enable-high-precision-mv, all motion vectors would default to 1/8 pel. Encode and decode syncs fine with the current code. In the next phase the code will be refactored so that we can choose the 1/8 pel mode adaptively at a frame/segment/mb level. Derf results: http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html (about 0.83% better than 8-tap interpoaltion) Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V Patch 4: HD results. http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html Seems impressive (unless I am doing something wrong). Patch 5: Added mmx/sse for bilateral filtering, as well as enforced use of c-versions of subpel filters with 8-taps and 1/16th pel; Also redesigned the 8-tap filters to reduce the cut-off in order to introduce a denoising effect. There is a new configure option sixteenth-subpel-uv which will use 1/16 th pel interpolation for uv, if the motion vectors have 1/8 pel accuracy. With the fixes the results are promising on the derf set. The enhanced interpolation option with 8-taps alone gives 3% improvement over thei derf set: http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html Results on high precision mv and on the hd set are to follow. Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in vp8/common/x86/x86_systemdependent.c Patch 7: Cleaning up various debug messages. Patch 8: Merge conflict Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
2012-02-16 18:29:54 +01:00
#if CONFIG_HIGH_PRECISION_MV
/* Is high precision mv allowed */
xd->allow_high_precision_mv = (unsigned char)vp8_read_bit(bc);
#endif
2010-05-18 17:58:33 +02:00
}
pc->refresh_entropy_probs = vp8_read_bit(bc);
if (pc->refresh_entropy_probs == 0)
{
vpx_memcpy(&pc->lfc, &pc->fc, sizeof(pc->fc));
}
pc->refresh_last_frame = pc->frame_type == KEY_FRAME || vp8_read_bit(bc);
if (0)
{
FILE *z = fopen("decodestats.stt", "a");
fprintf(z, "%6d F:%d,G:%d,A:%d,L:%d,Q:%d\n",
pc->current_video_frame,
pc->frame_type,
pc->refresh_golden_frame,
pc->refresh_alt_ref_frame,
pc->refresh_last_frame,
pc->base_qindex);
fclose(z);
}
{
pbi->independent_partitions = 1;
if(vp8_read_bit(bc))
{
/* read coef probability tree */
2010-05-18 17:58:33 +02:00
for (i = 0; i < BLOCK_TYPES; i++)
for (j = 0; j < COEF_BANDS; j++)
for (k = 0; k < PREV_COEF_CONTEXTS; k++)
for (l = 0; l < ENTROPY_NODES; l++)
2010-05-18 17:58:33 +02:00
{
vp8_prob *const p = pc->fc.coef_probs [i][j][k] + l;
if (vp8_read(bc, vp8_coef_update_probs [i][j][k][l]))
{
*p = (vp8_prob)vp8_read_literal(bc, 8);
}
if (k > 0 && *p != pc->fc.coef_probs[i][j][k-1][l])
pbi->independent_partitions = 0;
2010-05-18 17:58:33 +02:00
}
}
2010-05-18 17:58:33 +02:00
}
#if CONFIG_T8X8
if(pbi->common.txfm_mode == ALLOW_8X8 && vp8_read_bit(bc))
{
// read coef probability tree
for (i = 0; i < BLOCK_TYPES; i++)
for (j = 0; j < COEF_BANDS; j++)
for (k = 0; k < PREV_COEF_CONTEXTS; k++)
for (l = 0; l < MAX_ENTROPY_TOKENS - 1; l++)
{
vp8_prob *const p = pc->fc.coef_probs_8x8 [i][j][k] + l;
if (vp8_read(bc, vp8_coef_update_probs_8x8 [i][j][k][l]))
{
*p = (vp8_prob)vp8_read_literal(bc, 8);
}
}
}
#endif
2010-05-18 17:58:33 +02:00
vpx_memcpy(&xd->pre, &pc->yv12_fb[pc->lst_fb_idx], sizeof(YV12_BUFFER_CONFIG));
vpx_memcpy(&xd->dst, &pc->yv12_fb[pc->new_fb_idx], sizeof(YV12_BUFFER_CONFIG));
2010-05-18 17:58:33 +02:00
// Create the segmentation map structure and set to 0
if (!pc->last_frame_seg_map)
CHECK_MEM_ERROR(pc->last_frame_seg_map,
vpx_calloc((pc->mb_rows * pc->mb_cols), 1));
/* set up frame new frame for intra coded blocks */
vp8_setup_intra_recon(&pc->yv12_fb[pc->new_fb_idx]);
2010-05-18 17:58:33 +02:00
vp8_setup_block_dptrs(xd);
vp8_build_block_doffsets(xd);
/* clear out the coeff buffer */
2010-05-18 17:58:33 +02:00
vpx_memset(xd->qcoeff, 0, sizeof(xd->qcoeff));
/* Read the mb_no_coeff_skip flag */
2010-05-18 17:58:33 +02:00
pc->mb_no_coeff_skip = (int)vp8_read_bit(bc);
vp8_decode_mode_mvs(pbi);
if(pbi->common.frame_type != KEY_FRAME)
{
vp8_update_mode_context(&pbi->common);
}
2010-05-18 17:58:33 +02:00
vpx_memset(pc->above_context, 0, sizeof(ENTROPY_CONTEXT_PLANES) * pc->mb_cols);
2010-05-18 17:58:33 +02:00
// Resset the macroblock mode info context to the start of the list
xd->mode_info_context = pc->mi;
2010-05-18 17:58:33 +02:00
{
int ibc = 0;
2010-06-11 16:17:57 +02:00
int num_part = 1 << pc->multi_token_partition;
pbi->frame_corrupt_residual = 0;
2010-05-18 17:58:33 +02:00
#if CONFIG_SUPERBLOCKS
/* Decode a row of super-blocks */
for (mb_row = 0; mb_row < pc->mb_rows; mb_row+=2)
{
if (num_part > 1)
{
xd->current_bc = & pbi->mbc[ibc];
ibc++;
if (ibc == num_part)
ibc = 0;
}
decode_sb_row(pbi, pc, mb_row, xd);
}
#else
/* Decode a row of macro blocks */
2010-05-18 17:58:33 +02:00
for (mb_row = 0; mb_row < pc->mb_rows; mb_row++)
{
if (num_part > 1)
{
xd->current_bc = & pbi->mbc[ibc];
ibc++;
if (ibc == num_part)
ibc = 0;
}
decode_mb_row(pbi, pc, mb_row, xd);
2010-05-18 17:58:33 +02:00
}
#endif /* CONFIG_SUPERBLOCKS */
corrupt_tokens |= xd->corrupted;
2010-05-18 17:58:33 +02:00
}
stop_token_decoder(pbi);
/* Collect information about decoder corruption. */
/* 1. Check first boolean decoder for errors. */
pc->yv12_fb[pc->new_fb_idx].corrupted = vp8dx_bool_error(bc);
/* 2. Check the macroblock information */
pc->yv12_fb[pc->new_fb_idx].corrupted |= corrupt_tokens;
if (!pbi->decoded_key_frame)
{
if (pc->frame_type == KEY_FRAME &&
!pc->yv12_fb[pc->new_fb_idx].corrupted)
pbi->decoded_key_frame = 1;
else
vpx_internal_error(&pbi->common.error, VPX_CODEC_CORRUPT_FRAME,
"A stream must start with a complete key frame");
}
/* vpx_log("Decoder: Frame Decoded, Size Roughly:%d bytes \n",bc->pos+pbi->bc2.pos); */
2010-05-18 17:58:33 +02:00
/* If this was a kf or Gf note the Q used */
2010-06-11 16:17:57 +02:00
if ((pc->frame_type == KEY_FRAME) ||
pc->refresh_golden_frame || pc->refresh_alt_ref_frame)
{
2010-05-18 17:58:33 +02:00
pc->last_kf_gf_q = pc->base_qindex;
2010-06-11 16:17:57 +02:00
}
if(pc->refresh_entropy_probs)
{
if(pc->refresh_alt_ref_frame)
vpx_memcpy(&pc->lfc_a, &pc->fc, sizeof(pc->fc));
else
vpx_memcpy(&pc->lfc, &pc->fc, sizeof(pc->fc));
}
2010-05-18 17:58:33 +02:00
#ifdef PACKET_TESTING
{
FILE *f = fopen("decompressor.VP8", "ab");
unsigned int size = pbi->bc2.pos + pbi->bc.pos + 8;
fwrite((void *) &size, 4, 1, f);
fwrite((void *) pbi->Source, size, 1, f);
fclose(f);
}
#endif
//printf("Frame %d Done\n", frame_count++);
2010-05-18 17:58:33 +02:00
return 0;
}