generic-library/vpx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
vpx/vp8/decoder/threading.c

1016 lines
41 KiB
C
Raw Normal View History

Initial WebM release
2010-05-18 11:58:33 -04:00
/*
Use WebM in copyright notice for consistency Changes 'The VP8 project' to 'The WebM project', for consistency with other webmproject.org repositories. Fixes issue #97. Change-Id: I37c13ed5fbdb9d334ceef71c6350e9febed9bbba
2010-09-09 08:16:39 -04:00
* Copyright (c) 2010 The WebM project authors. All Rights Reserved.
Initial WebM release
2010-05-18 11:58:33 -04:00
*
Remove secondary mv clamping from decode stage This patch removes the secondary MV clamping from the MV decoder. This behavior was consistent with limits placed on non-split MVs by the reference encoder, but was inconsistent with the MVs generated in the split case. The purpose of this secondary clamping was only to prevent crashes on invalid data. It was not intended to be a behaviour an encoder could or should rely on. Instead of doing additional clamping in a way that changes the entropy context, the secondary clamp is removed and the border handling is made implmentation specific. With respect to the spec, the border is treated as essentially infinite, limited only by the clamping performed on the near/nearest reference and the maximum encodable magnitude of the residual MV. This does not affect any currently produced streams. Change-Id: I68d35a2fbb51570d6569eab4ad233961405230a3
2010-06-09 11:29:20 -04:00
* Use of this source code is governed by a BSD-style license
LICENSE: update with latest text Change-Id: Ieebea089095d9073b3a94932791099f614ce120c
2010-06-04 16:19:40 -04:00
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
Remove secondary mv clamping from decode stage This patch removes the secondary MV clamping from the MV decoder. This behavior was consistent with limits placed on non-split MVs by the reference encoder, but was inconsistent with the MVs generated in the split case. The purpose of this secondary clamping was only to prevent crashes on invalid data. It was not intended to be a behaviour an encoder could or should rely on. Instead of doing additional clamping in a way that changes the entropy context, the secondary clamp is removed and the border handling is made implmentation specific. With respect to the spec, the border is treated as essentially infinite, limited only by the clamping performed on the near/nearest reference and the maximum encodable magnitude of the residual MV. This does not affect any currently produced streams. Change-Id: I68d35a2fbb51570d6569eab4ad233961405230a3
2010-06-09 11:29:20 -04:00
* in the file PATENTS. All contributing project authors may
LICENSE: update with latest text Change-Id: Ieebea089095d9073b3a94932791099f614ce120c
2010-06-04 16:19:40 -04:00
* be found in the AUTHORS file in the root of the source tree.
Initial WebM release
2010-05-18 11:58:33 -04:00
*/
New RTCD implementation This is a proof of concept RTCD implementation to replace the current system of nested includes, prototypes, INVOKE macros, etc. Currently only the decoder specific functions are implemented in the new system. Additional functions will be added in subsequent commits. Overview: RTCD "functions" are implemented as either a global function pointer or a macro (when only one eligible specialization available). Functions which have RTCD specializations are listed using a simple DSL identifying the function's base name, its prototype, and the architecture extensions that specializations are available for. Advantages over the old system: - No INVOKE macros. A call to an RTCD function looks like an ordinary function call. - No need to pass vtables around. - If there is only one eligible function to call, the function is called directly, rather than indirecting through a function pointer. - Supports the notion of "required" extensions, so in combination with the above, on x86_64 if the best function available is sse2 or lower it will be called directly, since all x86_64 platforms implement sse2. - Elides all references to functions which will never be called, which could reduce binary size. For example if sse2 is required and there are both mmx and sse2 implementations of a certain function, the code will have no link time references to the mmx code. - Significantly easier to add a new function, just one file to edit. Disadvantages: - Requires global writable data (though this is not a new requirement) - 1 new generated source file. Change-Id: Iae6edab65315f79c168485c96872641c5aa09d55
2011-08-19 14:06:00 -04:00
#include "vpx_config.h"
#include "vpx_rtcd.h"
Adds "armvX-none-rvct" targets Adds following targets to configure script to support RVCT compilation without operating system support (for Profiler or bare metal images). - armv5te-none-rvct - armv6-none-rvct - armv7-none-rvct To strip OS specific parts from the code "os_support"-config was added to script and CONFIG_OS_SUPPORT flag is used in the code to exclude OS specific parts such as OS specific includes and function calls for timers and threads etc. This was done to enable RVCT compilation for profiling purposes or running the image on bare metal target with Lauterbach. Removed separate AREA directives for READONLY data in armv6 and neon assembly files to fix the RVCT compilation. Otherwise "ldr <reg>, =label" syntax would have been needed to prevent linker errors. This syntax is not supported by older gnu assemblers. Change-Id: I14f4c68529e8c27397502fbc3010a54e505ddb43
2011-01-24 11:21:40 +02:00
#if !defined(WIN32) && CONFIG_OS_SUPPORT == 1
Initial WebM release
2010-05-18 11:58:33 -04:00
# include <unistd.h>
#endif
#include "onyxd_int.h"
#include "vpx_mem/vpx_mem.h"
Fix relative include paths Allow compiling without adding vp8/{common,encoder,decoder} to the include paths. Change-Id: Ifeb5dac351cdfadcd659736f5158b315a0030b6c
2011-02-10 14:41:38 -05:00
#include "vp8/common/threading.h"
Initial WebM release
2010-05-18 11:58:33 -04:00
Fix relative include paths Allow compiling without adding vp8/{common,encoder,decoder} to the include paths. Change-Id: Ifeb5dac351cdfadcd659736f5158b315a0030b6c
2011-02-10 14:41:38 -05:00
#include "vp8/common/loopfilter.h"
#include "vp8/common/extend.h"
Initial WebM release
2010-05-18 11:58:33 -04:00
#include "vpx_ports/vpx_timer.h"
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
#include "detokenize.h"
Fix relative include paths Allow compiling without adding vp8/{common,encoder,decoder} to the include paths. Change-Id: Ifeb5dac351cdfadcd659736f5158b315a0030b6c
2011-02-10 14:41:38 -05:00
#include "vp8/common/reconinter.h"
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
#include "reconintra_mt.h"
Adding support for error concealment in multi-threaded decoding Also includes a couple of error concealment bug fixes: - the segment_id wasn't properly initialized when missing - when interpolating and no neighbors are found, set to zero - clear the qcoef buffer when concealing an MB Change-Id: Id79c876b41d78b559a2241e9cd0fd2cae6198f49
2011-06-16 11:44:50 +02:00
#if CONFIG_ERROR_CONCEALMENT
#include "error_concealment.h"
#endif
Initial WebM release
2010-05-18 11:58:33 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
extern void mb_init_dequantizer(VP8D_COMP *pbi, MACROBLOCKD *xd);
Initial WebM release
2010-05-18 11:58:33 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
#if CONFIG_RUNTIME_CPU_DETECT
#define RTCD_VTABLE(x) (&(pbi)->common.rtcd.x)
#else
#define RTCD_VTABLE(x) NULL
#endif
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
Increase static linkage, remove unused functions A large number of functions were defined with external linkage, even though they were only used from within one file. This patch changes their linkage to static and removes the vp8_ prefix from their names, which should make it more obvious to the reader that the function is contained within the current translation unit. Functions that were not referenced were removed. These symbols were identified by: $ nm -A libvpx.a | sort -k3 | uniq -c -f2 | grep ' [A-Z] ' \ | sort | grep '^ *1 ' Change-Id: I59609f58ab65312012c047036ae1e0634f795779
2011-03-17 17:07:59 -04:00
static void setup_decoding_thread_data(VP8D_COMP *pbi, MACROBLOCKD *xd, MB_ROW_DEC *mbrd, int count)
Initial WebM release
2010-05-18 11:58:33 -04:00
{
VP8_COMMON *const pc = & pbi->common;
Reduced the size of Y1Dequant and friends to [128][2] This patch removes the local copies of the dequantize constants and implements John's idea as described in "Make a local copy of the dequantized data" commit. Change-Id: Ic6b7d681f00bf63263f71ff1e39ab2f80729e8b2
2012-01-04 11:56:50 -05:00
int i;
Initial WebM release
2010-05-18 11:58:33 -04:00
for (i = 0; i < count; i++)
{
MACROBLOCKD *mbd = &mbrd[i].mbd;
#if CONFIG_RUNTIME_CPU_DETECT
mbd->rtcd = xd->rtcd;
#endif
mbd->subpixel_predict = xd->subpixel_predict;
mbd->subpixel_predict8x4 = xd->subpixel_predict8x4;
mbd->subpixel_predict8x8 = xd->subpixel_predict8x8;
mbd->subpixel_predict16x16 = xd->subpixel_predict16x16;
mbd->mode_info_context = pc->mi + pc->mode_info_stride * (i + 1);
mbd->mode_info_stride = pc->mode_info_stride;
mbd->frame_type = pc->frame_type;
mbd->frames_since_golden = pc->frames_since_golden;
mbd->frames_till_alt_ref_frame = pc->frames_till_alt_ref_frame;
Swap alt/gold/new/last frame buffer ptrs instead of copying. At the end of the decode, frame buffers were being copied. The frames are not updated after the copy, they are just for reference on later frames. This change allows multiple references to the same frame buffer instead of copying it. Changes needed to be made to the encoder to handle this. The encoder is still doing frame buffer copies in similar places where pointer reference could be done. Change-Id: I7c38be4d23979cc49b5f17241ca3a78703803e66
2010-07-22 08:07:32 -04:00
mbd->pre = pc->yv12_fb[pc->lst_fb_idx];
mbd->dst = pc->yv12_fb[pc->new_fb_idx];
Initial WebM release
2010-05-18 11:58:33 -04:00
vp8_setup_block_dptrs(mbd);
vp8_build_block_doffsets(mbd);
mbd->segmentation_enabled = xd->segmentation_enabled;
mbd->mb_segement_abs_delta = xd->mb_segement_abs_delta;
vpx_memcpy(mbd->segment_feature_data, xd->segment_feature_data, sizeof(xd->segment_feature_data));
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/*signed char ref_lf_deltas[MAX_REF_LF_DELTAS];*/
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
vpx_memcpy(mbd->ref_lf_deltas, xd->ref_lf_deltas, sizeof(xd->ref_lf_deltas));
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/*signed char mode_lf_deltas[MAX_MODE_LF_DELTAS];*/
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
vpx_memcpy(mbd->mode_lf_deltas, xd->mode_lf_deltas, sizeof(xd->mode_lf_deltas));
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/*unsigned char mode_ref_lf_delta_enabled;
unsigned char mode_ref_lf_delta_update;*/
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
mbd->mode_ref_lf_delta_enabled = xd->mode_ref_lf_delta_enabled;
mbd->mode_ref_lf_delta_update = xd->mode_ref_lf_delta_update;
Initial WebM release
2010-05-18 11:58:33 -04:00
mbd->current_bc = &pbi->bc2;
Reduced the size of Y1Dequant and friends to [128][2] This patch removes the local copies of the dequantize constants and implements John's idea as described in "Make a local copy of the dequantized data" commit. Change-Id: Ic6b7d681f00bf63263f71ff1e39ab2f80729e8b2
2012-01-04 11:56:50 -05:00
vpx_memcpy(mbd->dequant_y1_dc, xd->dequant_y1_dc, sizeof(xd->dequant_y1_dc));
vpx_memcpy(mbd->dequant_y1, xd->dequant_y1, sizeof(xd->dequant_y1));
vpx_memcpy(mbd->dequant_y2, xd->dequant_y2, sizeof(xd->dequant_y2));
vpx_memcpy(mbd->dequant_uv, xd->dequant_uv, sizeof(xd->dequant_uv));
Removed bmi copy to/from BLOCKD for SPLITMV and B_PRED modes. Modified code to use the bmi found in mode_info_context instead of BLOCKD. On the decode side, the uvmvs are calculated only when required, instead of every macroblock. This is WIP. (bmi should eventually be removed from BLOCKD) Small performance gains noticed for RT encodes and decodes.(VGA) Change-Id: I2ed7f0fd5ca733655df684aa82da575c77a973e7
2011-08-24 14:42:26 -04:00
mbd->fullpixel_mask = 0xffffffff;
if(pc->full_pixel)
mbd->fullpixel_mask = 0xfffffff8;
Initial WebM release
2010-05-18 11:58:33 -04:00
}
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
for (i=0; i< pc->mb_rows; i++)
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
pbi->mt_current_mb_col[i]=-1;
Initial WebM release
2010-05-18 11:58:33 -04:00
}
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
Increase static linkage, remove unused functions A large number of functions were defined with external linkage, even though they were only used from within one file. This patch changes their linkage to static and removes the vp8_ prefix from their names, which should make it more obvious to the reader that the function is contained within the current translation unit. Functions that were not referenced were removed. These symbols were identified by: $ nm -A libvpx.a | sort -k3 | uniq -c -f2 | grep ' [A-Z] ' \ | sort | grep '^ *1 ' Change-Id: I59609f58ab65312012c047036ae1e0634f795779
2011-03-17 17:07:59 -04:00
static void decode_macroblock(VP8D_COMP *pbi, MACROBLOCKD *xd, int mb_row, int mb_col)
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
{
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
int eobtotal = 0;
Disable error concealment until first key frame is decoded When error concealment is enabled the first key frame must be successfully received before error concealment is activated. Error concealment will be activated when the delta following delta frame is received. Also fixed a couple of bugs related to error tracking in multi-threading. And avoiding decoding corrupt residual when we have multiple non-resilient partitions. Change-Id: I45c4bb296e2f05f57624aef500a874faf431a60d
2011-08-08 10:56:20 +02:00
int throw_residual = 0;
clamp_mvs() using the wrong motion vector information In the "Removed bmi copy to/from BLOCKD" commit, the copy to the bmi in BLOCKD was eliminated. The clamp_mvs() used the bmi in BLOCKD, which now contains incorrect values. This patch fixes this problem. Change-Id: I8eca1eaf4015052b0b63e90876f7ad321aba7cff
2011-09-16 11:03:53 -04:00
int i;
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if (xd->mode_info_context->mbmi.mb_skip_coeff)
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
{
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
vp8_reset_mb_tokens_context(xd);
}
Fix necessary for input partitions iface to match the RTP profile These changes fixes a glitch between the RTP profile and the input partitions interface. Since there's no way for the user to know the actual number of partitions, the decoder have to read the multi_token_paritition bits also when input partitions mode is enabled. Included are also a couple of fixes for issues with independent partitions and uninitialized memory reads. Change-Id: I6f93b15287d291169ed681898ed3fbcc5dc81837
2011-09-06 14:34:36 +02:00
else if (!vp8dx_bool_error(xd->current_bc))
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
{
eobtotal = vp8_decode_mb_tokens(pbi, xd);
}
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
Removed dc_diff from MB_MODE_INFO The dc_diff flag is used to skip loopfiltering. Instead of setting this flag in the decoder/encoder, we now check for this condition in the loopfilter. Change-Id: Ie2b9cdf9e0f4e8b932bbd36e0878c05bffd28931
2011-04-21 14:38:36 -04:00
eobtotal |= (xd->mode_info_context->mbmi.mode == B_PRED ||
xd->mode_info_context->mbmi.mode == SPLITMV);
Disable error concealment until first key frame is decoded When error concealment is enabled the first key frame must be successfully received before error concealment is activated. Error concealment will be activated when the delta following delta frame is received. Also fixed a couple of bugs related to error tracking in multi-threading. And avoiding decoding corrupt residual when we have multiple non-resilient partitions. Change-Id: I45c4bb296e2f05f57624aef500a874faf431a60d
2011-08-08 10:56:20 +02:00
if (!eobtotal && !vp8dx_bool_error(xd->current_bc))
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
{
Test vector mismatch fix Fixed test vector mismatch that was introduced in the "Removed dc_diff from MB_MODE_INFO" (Ie2b9cdf9e0f4e8b932bbd36e0878c05bffd28931) Change-Id: I98fa509b418e757b5cdc4baa71202f4168dc14ec
2011-04-26 09:37:19 -04:00
/* Special case: Force the loopfilter to skip when eobtotal and
* mb_skip_coeff are zero.
* */
xd->mode_info_context->mbmi.mb_skip_coeff = 1;
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/*mt_skip_recon_mb(pbi, xd, mb_row, mb_col);*/
Consolidated build inter predictors Code cleanup. Change-Id: Ic8b0167851116c64ddf08e8a3d302fb09ab61146
2011-04-28 10:53:59 -04:00
if (xd->mode_info_context->mbmi.ref_frame == INTRA_FRAME)
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
{
vp8mt_build_intra_predictors_mbuv_s(pbi, xd, mb_row, mb_col);
vp8mt_build_intra_predictors_mby_s(pbi, xd, mb_row, mb_col);
}
else
{
Consolidated build inter predictors Code cleanup. Change-Id: Ic8b0167851116c64ddf08e8a3d302fb09ab61146
2011-04-28 10:53:59 -04:00
vp8_build_inter16x16_predictors_mb(xd, xd->dst.y_buffer,
xd->dst.u_buffer, xd->dst.v_buffer,
xd->dst.y_stride, xd->dst.uv_stride);
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
}
return;
}
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if (xd->segmentation_enabled)
mb_init_dequantizer(pbi, xd);
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* do prediction */
Remove redundant check for KEY_FRAME in multithreaded decoder For Intra blocks is enough to check ref_frame == INTRA_FRAME. Change-Id: I3e2d3064c7642658a9e14011a4627de58878e366
2011-06-13 15:13:10 +03:00
if (xd->mode_info_context->mbmi.ref_frame == INTRA_FRAME)
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
{
Remove usage of predict buffer for decode Instead of using the predict buffer, the decoder now writes the predictor into the recon buffer. For blocks with eob=0, unnecessary idcts can be eliminated. This gave a performance boost of ~1.8% for the HD clips used. Tero: Added needed changes to ARM side and scheduled some assembly code to prevent interlocks. Patch Set 6: Merged (I1bcdca7a95aacc3a181b9faa6b10e3a71ee24df3) into this commit because of similarities in the idct functions. Patch Set 7: EC bug fix. Change-Id: Ie31d90b5d3522e1108163f2ac491e455e3f955e6
2011-10-18 12:06:50 -04:00
vp8mt_build_intra_predictors_mbuv_s(pbi, xd, mb_row, mb_col);
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if (xd->mode_info_context->mbmi.mode != B_PRED)
{
Remove usage of predict buffer for decode Instead of using the predict buffer, the decoder now writes the predictor into the recon buffer. For blocks with eob=0, unnecessary idcts can be eliminated. This gave a performance boost of ~1.8% for the HD clips used. Tero: Added needed changes to ARM side and scheduled some assembly code to prevent interlocks. Patch Set 6: Merged (I1bcdca7a95aacc3a181b9faa6b10e3a71ee24df3) into this commit because of similarities in the idct functions. Patch Set 7: EC bug fix. Change-Id: Ie31d90b5d3522e1108163f2ac491e455e3f955e6
2011-10-18 12:06:50 -04:00
vp8mt_build_intra_predictors_mby_s(pbi, xd, mb_row, mb_col);
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
} else {
vp8mt_intra_prediction_down_copy(pbi, xd, mb_row, mb_col);
}
}
else
{
vp8_build_inter_predictors_mb(xd);
}
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
Disable error concealment until first key frame is decoded When error concealment is enabled the first key frame must be successfully received before error concealment is activated. Error concealment will be activated when the delta following delta frame is received. Also fixed a couple of bugs related to error tracking in multi-threading. And avoiding decoding corrupt residual when we have multiple non-resilient partitions. Change-Id: I45c4bb296e2f05f57624aef500a874faf431a60d
2011-08-08 10:56:20 +02:00
/* When we have independent partitions we can apply residual even
* though other partitions within the frame are corrupt.
*/
throw_residual = (!pbi->independent_partitions &&
pbi->frame_corrupt_residual);
throw_residual = (throw_residual || vp8dx_bool_error(xd->current_bc));
Adding support for error concealment in multi-threaded decoding Also includes a couple of error concealment bug fixes: - the segment_id wasn't properly initialized when missing - when interpolating and no neighbors are found, set to zero - clear the qcoef buffer when concealing an MB Change-Id: Id79c876b41d78b559a2241e9cd0fd2cae6198f49
2011-06-16 11:44:50 +02:00
#if CONFIG_ERROR_CONCEALMENT
Disable error concealment until first key frame is decoded When error concealment is enabled the first key frame must be successfully received before error concealment is activated. Error concealment will be activated when the delta following delta frame is received. Also fixed a couple of bugs related to error tracking in multi-threading. And avoiding decoding corrupt residual when we have multiple non-resilient partitions. Change-Id: I45c4bb296e2f05f57624aef500a874faf431a60d
2011-08-08 10:56:20 +02:00
if (pbi->ec_active &&
Adding support for error concealment in multi-threaded decoding Also includes a couple of error concealment bug fixes: - the segment_id wasn't properly initialized when missing - when interpolating and no neighbors are found, set to zero - clear the qcoef buffer when concealing an MB Change-Id: Id79c876b41d78b559a2241e9cd0fd2cae6198f49
2011-06-16 11:44:50 +02:00
(mb_row * pbi->common.mb_cols + mb_col >= pbi->mvs_corrupt_from_mb ||
Fix necessary for input partitions iface to match the RTP profile These changes fixes a glitch between the RTP profile and the input partitions interface. Since there's no way for the user to know the actual number of partitions, the decoder have to read the multi_token_paritition bits also when input partitions mode is enabled. Included are also a couple of fixes for issues with independent partitions and uninitialized memory reads. Change-Id: I6f93b15287d291169ed681898ed3fbcc5dc81837
2011-09-06 14:34:36 +02:00
throw_residual))
Adding support for error concealment in multi-threaded decoding Also includes a couple of error concealment bug fixes: - the segment_id wasn't properly initialized when missing - when interpolating and no neighbors are found, set to zero - clear the qcoef buffer when concealing an MB Change-Id: Id79c876b41d78b559a2241e9cd0fd2cae6198f49
2011-06-16 11:44:50 +02:00
{
/* MB with corrupt residuals or corrupt mode/motion vectors.
* Better to use the predictor as reconstruction.
*/
Disable error concealment until first key frame is decoded When error concealment is enabled the first key frame must be successfully received before error concealment is activated. Error concealment will be activated when the delta following delta frame is received. Also fixed a couple of bugs related to error tracking in multi-threading. And avoiding decoding corrupt residual when we have multiple non-resilient partitions. Change-Id: I45c4bb296e2f05f57624aef500a874faf431a60d
2011-08-08 10:56:20 +02:00
pbi->frame_corrupt_residual = 1;
Adding support for error concealment in multi-threaded decoding Also includes a couple of error concealment bug fixes: - the segment_id wasn't properly initialized when missing - when interpolating and no neighbors are found, set to zero - clear the qcoef buffer when concealing an MB Change-Id: Id79c876b41d78b559a2241e9cd0fd2cae6198f49
2011-06-16 11:44:50 +02:00
vpx_memset(xd->qcoeff, 0, sizeof(xd->qcoeff));
vp8_conceal_corrupt_mb(xd);
return;
}
#endif
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* dequantization and idct */
Modified the inverse walsh to output directly to the dqcoeff or qcoeff buffer. The encoder would populate the dc coeffs of the y blocks as a separate stage (recon_dcblock) and the decoder would use a special version of the idct. This change eliminates the extra copy and reduces the code footprint. [Tero] Added needed changes to armv6 and NEON assembly. Change-Id: I83202ffdbaf83f6e5dd69f4ba2519fcf0b13b3ba
2011-11-17 12:54:42 -05:00
if (xd->mode_info_context->mbmi.mode == B_PRED)
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
{
Reduced the size of Y1Dequant and friends to [128][2] This patch removes the local copies of the dequantize constants and implements John's idea as described in "Make a local copy of the dequantized data" commit. Change-Id: Ic6b7d681f00bf63263f71ff1e39ab2f80729e8b2
2012-01-04 11:56:50 -05:00
short *DQC = xd->dequant_y1;
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
for (i = 0; i < 16; i++)
{
BLOCKD *b = &xd->block[i];
Removed bmi copy to/from BLOCKD for SPLITMV and B_PRED modes. Modified code to use the bmi found in mode_info_context instead of BLOCKD. On the decode side, the uvmvs are calculated only when required, instead of every macroblock. This is WIP. (bmi should eventually be removed from BLOCKD) Small performance gains noticed for RT encodes and decodes.(VGA) Change-Id: I2ed7f0fd5ca733655df684aa82da575c77a973e7
2011-08-24 14:42:26 -04:00
int b_mode = xd->mode_info_context->bmi[i].as_mode;
Removed B_MODE_INFO Declared the bmi in BLOCKD as a union instead of B_MODE_INFO. Then removed B_MODE_INFO completely. Change-Id: Ieb7469899e265892c66f7aeac87b7f2bf38e7a67
2011-06-02 13:46:41 -04:00
Remove usage of predict buffer for decode Instead of using the predict buffer, the decoder now writes the predictor into the recon buffer. For blocks with eob=0, unnecessary idcts can be eliminated. This gave a performance boost of ~1.8% for the HD clips used. Tero: Added needed changes to ARM side and scheduled some assembly code to prevent interlocks. Patch Set 6: Merged (I1bcdca7a95aacc3a181b9faa6b10e3a71ee24df3) into this commit because of similarities in the idct functions. Patch Set 7: EC bug fix. Change-Id: Ie31d90b5d3522e1108163f2ac491e455e3f955e6
2011-10-18 12:06:50 -04:00
vp8mt_predict_intra4x4(pbi, xd, b_mode, *(b->base_dst) + b->dst,
b->dst_stride, mb_row, mb_col, i);
Removed B_MODE_INFO Declared the bmi in BLOCKD as a union instead of B_MODE_INFO. Then removed B_MODE_INFO completely. Change-Id: Ieb7469899e265892c66f7aeac87b7f2bf38e7a67
2011-06-02 13:46:41 -04:00
Modified the inverse walsh to output directly to the dqcoeff or qcoeff buffer. The encoder would populate the dc coeffs of the y blocks as a separate stage (recon_dcblock) and the decoder would use a special version of the idct. This change eliminates the extra copy and reduces the code footprint. [Tero] Added needed changes to armv6 and NEON assembly. Change-Id: I83202ffdbaf83f6e5dd69f4ba2519fcf0b13b3ba
2011-11-17 12:54:42 -05:00
if (xd->eobs[i] )
{
if (xd->eobs[i] > 1)
{
New RTCD implementation This is a proof of concept RTCD implementation to replace the current system of nested includes, prototypes, INVOKE macros, etc. Currently only the decoder specific functions are implemented in the new system. Additional functions will be added in subsequent commits. Overview: RTCD "functions" are implemented as either a global function pointer or a macro (when only one eligible specialization available). Functions which have RTCD specializations are listed using a simple DSL identifying the function's base name, its prototype, and the architecture extensions that specializations are available for. Advantages over the old system: - No INVOKE macros. A call to an RTCD function looks like an ordinary function call. - No need to pass vtables around. - If there is only one eligible function to call, the function is called directly, rather than indirecting through a function pointer. - Supports the notion of "required" extensions, so in combination with the above, on x86_64 if the best function available is sse2 or lower it will be called directly, since all x86_64 platforms implement sse2. - Elides all references to functions which will never be called, which could reduce binary size. For example if sse2 is required and there are both mmx and sse2 implementations of a certain function, the code will have no link time references to the mmx code. - Significantly easier to add a new function, just one file to edit. Disadvantages: - Requires global writable data (though this is not a new requirement) - 1 new generated source file. Change-Id: Iae6edab65315f79c168485c96872641c5aa09d55
2011-08-19 14:06:00 -04:00
vp8_dequant_idct_add
Reduced the size of Y1Dequant and friends to [128][2] This patch removes the local copies of the dequantize constants and implements John's idea as described in "Make a local copy of the dequantized data" commit. Change-Id: Ic6b7d681f00bf63263f71ff1e39ab2f80729e8b2
2012-01-04 11:56:50 -05:00
(b->qcoeff, DQC,
Modified the inverse walsh to output directly to the dqcoeff or qcoeff buffer. The encoder would populate the dc coeffs of the y blocks as a separate stage (recon_dcblock) and the decoder would use a special version of the idct. This change eliminates the extra copy and reduces the code footprint. [Tero] Added needed changes to armv6 and NEON assembly. Change-Id: I83202ffdbaf83f6e5dd69f4ba2519fcf0b13b3ba
2011-11-17 12:54:42 -05:00
*(b->base_dst) + b->dst, b->dst_stride);
}
else
{
IDCT_INVOKE(RTCD_VTABLE(idct), idct1_scalar_add)
Reduced the size of Y1Dequant and friends to [128][2] This patch removes the local copies of the dequantize constants and implements John's idea as described in "Make a local copy of the dequantized data" commit. Change-Id: Ic6b7d681f00bf63263f71ff1e39ab2f80729e8b2
2012-01-04 11:56:50 -05:00
(b->qcoeff[0] * DQC[0],
Modified the inverse walsh to output directly to the dqcoeff or qcoeff buffer. The encoder would populate the dc coeffs of the y blocks as a separate stage (recon_dcblock) and the decoder would use a special version of the idct. This change eliminates the extra copy and reduces the code footprint. [Tero] Added needed changes to armv6 and NEON assembly. Change-Id: I83202ffdbaf83f6e5dd69f4ba2519fcf0b13b3ba
2011-11-17 12:54:42 -05:00
*(b->base_dst) + b->dst, b->dst_stride,
*(b->base_dst) + b->dst, b->dst_stride);
((int *)b->qcoeff)[0] = 0;
}
}
}
}
else
{
Reduced the size of Y1Dequant and friends to [128][2] This patch removes the local copies of the dequantize constants and implements John's idea as described in "Make a local copy of the dequantized data" commit. Change-Id: Ic6b7d681f00bf63263f71ff1e39ab2f80729e8b2
2012-01-04 11:56:50 -05:00
short *DQC = xd->dequant_y1;
Modified the inverse walsh to output directly to the dqcoeff or qcoeff buffer. The encoder would populate the dc coeffs of the y blocks as a separate stage (recon_dcblock) and the decoder would use a special version of the idct. This change eliminates the extra copy and reduces the code footprint. [Tero] Added needed changes to armv6 and NEON assembly. Change-Id: I83202ffdbaf83f6e5dd69f4ba2519fcf0b13b3ba
2011-11-17 12:54:42 -05:00
if (xd->mode_info_context->mbmi.mode != SPLITMV)
{
BLOCKD *b = &xd->block[24];
/* do 2nd order transform on the dc block */
if (xd->eobs[24] > 1)
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
{
New RTCD implementation This is a proof of concept RTCD implementation to replace the current system of nested includes, prototypes, INVOKE macros, etc. Currently only the decoder specific functions are implemented in the new system. Additional functions will be added in subsequent commits. Overview: RTCD "functions" are implemented as either a global function pointer or a macro (when only one eligible specialization available). Functions which have RTCD specializations are listed using a simple DSL identifying the function's base name, its prototype, and the architecture extensions that specializations are available for. Advantages over the old system: - No INVOKE macros. A call to an RTCD function looks like an ordinary function call. - No need to pass vtables around. - If there is only one eligible function to call, the function is called directly, rather than indirecting through a function pointer. - Supports the notion of "required" extensions, so in combination with the above, on x86_64 if the best function available is sse2 or lower it will be called directly, since all x86_64 platforms implement sse2. - Elides all references to functions which will never be called, which could reduce binary size. For example if sse2 is required and there are both mmx and sse2 implementations of a certain function, the code will have no link time references to the mmx code. - Significantly easier to add a new function, just one file to edit. Disadvantages: - Requires global writable data (though this is not a new requirement) - 1 new generated source file. Change-Id: Iae6edab65315f79c168485c96872641c5aa09d55
2011-08-19 14:06:00 -04:00
vp8_dequantize_b(b, xd->dequant_y2);
Modified the inverse walsh to output directly to the dqcoeff or qcoeff buffer. The encoder would populate the dc coeffs of the y blocks as a separate stage (recon_dcblock) and the decoder would use a special version of the idct. This change eliminates the extra copy and reduces the code footprint. [Tero] Added needed changes to armv6 and NEON assembly. Change-Id: I83202ffdbaf83f6e5dd69f4ba2519fcf0b13b3ba
2011-11-17 12:54:42 -05:00
IDCT_INVOKE(RTCD_VTABLE(idct), iwalsh16)(&b->dqcoeff[0],
xd->qcoeff);
((int *)b->qcoeff)[0] = 0;
((int *)b->qcoeff)[1] = 0;
((int *)b->qcoeff)[2] = 0;
((int *)b->qcoeff)[3] = 0;
((int *)b->qcoeff)[4] = 0;
((int *)b->qcoeff)[5] = 0;
((int *)b->qcoeff)[6] = 0;
((int *)b->qcoeff)[7] = 0;
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
}
else
{
Reduced the size of Y1Dequant and friends to [128][2] This patch removes the local copies of the dequantize constants and implements John's idea as described in "Make a local copy of the dequantized data" commit. Change-Id: Ic6b7d681f00bf63263f71ff1e39ab2f80729e8b2
2012-01-04 11:56:50 -05:00
b->dqcoeff[0] = b->qcoeff[0] * xd->dequant_y2[0];
Modified the inverse walsh to output directly to the dqcoeff or qcoeff buffer. The encoder would populate the dc coeffs of the y blocks as a separate stage (recon_dcblock) and the decoder would use a special version of the idct. This change eliminates the extra copy and reduces the code footprint. [Tero] Added needed changes to armv6 and NEON assembly. Change-Id: I83202ffdbaf83f6e5dd69f4ba2519fcf0b13b3ba
2011-11-17 12:54:42 -05:00
IDCT_INVOKE(RTCD_VTABLE(idct), iwalsh1)(&b->dqcoeff[0], xd->qcoeff);
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
((int *)b->qcoeff)[0] = 0;
}
Modified the inverse walsh to output directly to the dqcoeff or qcoeff buffer. The encoder would populate the dc coeffs of the y blocks as a separate stage (recon_dcblock) and the decoder would use a special version of the idct. This change eliminates the extra copy and reduces the code footprint. [Tero] Added needed changes to armv6 and NEON assembly. Change-Id: I83202ffdbaf83f6e5dd69f4ba2519fcf0b13b3ba
2011-11-17 12:54:42 -05:00
/* override the dc dequant constant */
Reduced the size of Y1Dequant and friends to [128][2] This patch removes the local copies of the dequantize constants and implements John's idea as described in "Make a local copy of the dequantized data" commit. Change-Id: Ic6b7d681f00bf63263f71ff1e39ab2f80729e8b2
2012-01-04 11:56:50 -05:00
DQC = xd->dequant_y1_dc;
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
}
Modified the inverse walsh to output directly to the dqcoeff or qcoeff buffer. The encoder would populate the dc coeffs of the y blocks as a separate stage (recon_dcblock) and the decoder would use a special version of the idct. This change eliminates the extra copy and reduces the code footprint. [Tero] Added needed changes to armv6 and NEON assembly. Change-Id: I83202ffdbaf83f6e5dd69f4ba2519fcf0b13b3ba
2011-11-17 12:54:42 -05:00
New RTCD implementation This is a proof of concept RTCD implementation to replace the current system of nested includes, prototypes, INVOKE macros, etc. Currently only the decoder specific functions are implemented in the new system. Additional functions will be added in subsequent commits. Overview: RTCD "functions" are implemented as either a global function pointer or a macro (when only one eligible specialization available). Functions which have RTCD specializations are listed using a simple DSL identifying the function's base name, its prototype, and the architecture extensions that specializations are available for. Advantages over the old system: - No INVOKE macros. A call to an RTCD function looks like an ordinary function call. - No need to pass vtables around. - If there is only one eligible function to call, the function is called directly, rather than indirecting through a function pointer. - Supports the notion of "required" extensions, so in combination with the above, on x86_64 if the best function available is sse2 or lower it will be called directly, since all x86_64 platforms implement sse2. - Elides all references to functions which will never be called, which could reduce binary size. For example if sse2 is required and there are both mmx and sse2 implementations of a certain function, the code will have no link time references to the mmx code. - Significantly easier to add a new function, just one file to edit. Disadvantages: - Requires global writable data (though this is not a new requirement) - 1 new generated source file. Change-Id: Iae6edab65315f79c168485c96872641c5aa09d55
2011-08-19 14:06:00 -04:00
vp8_dequant_idct_add_y_block
Modified the inverse walsh to output directly to the dqcoeff or qcoeff buffer. The encoder would populate the dc coeffs of the y blocks as a separate stage (recon_dcblock) and the decoder would use a special version of the idct. This change eliminates the extra copy and reduces the code footprint. [Tero] Added needed changes to armv6 and NEON assembly. Change-Id: I83202ffdbaf83f6e5dd69f4ba2519fcf0b13b3ba
2011-11-17 12:54:42 -05:00
(xd->qcoeff, DQC,
Remove usage of predict buffer for decode Instead of using the predict buffer, the decoder now writes the predictor into the recon buffer. For blocks with eob=0, unnecessary idcts can be eliminated. This gave a performance boost of ~1.8% for the HD clips used. Tero: Added needed changes to ARM side and scheduled some assembly code to prevent interlocks. Patch Set 6: Merged (I1bcdca7a95aacc3a181b9faa6b10e3a71ee24df3) into this commit because of similarities in the idct functions. Patch Set 7: EC bug fix. Change-Id: Ie31d90b5d3522e1108163f2ac491e455e3f955e6
2011-10-18 12:06:50 -04:00
xd->dst.y_buffer,
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
xd->dst.y_stride, xd->eobs);
}
New RTCD implementation This is a proof of concept RTCD implementation to replace the current system of nested includes, prototypes, INVOKE macros, etc. Currently only the decoder specific functions are implemented in the new system. Additional functions will be added in subsequent commits. Overview: RTCD "functions" are implemented as either a global function pointer or a macro (when only one eligible specialization available). Functions which have RTCD specializations are listed using a simple DSL identifying the function's base name, its prototype, and the architecture extensions that specializations are available for. Advantages over the old system: - No INVOKE macros. A call to an RTCD function looks like an ordinary function call. - No need to pass vtables around. - If there is only one eligible function to call, the function is called directly, rather than indirecting through a function pointer. - Supports the notion of "required" extensions, so in combination with the above, on x86_64 if the best function available is sse2 or lower it will be called directly, since all x86_64 platforms implement sse2. - Elides all references to functions which will never be called, which could reduce binary size. For example if sse2 is required and there are both mmx and sse2 implementations of a certain function, the code will have no link time references to the mmx code. - Significantly easier to add a new function, just one file to edit. Disadvantages: - Requires global writable data (though this is not a new requirement) - 1 new generated source file. Change-Id: Iae6edab65315f79c168485c96872641c5aa09d55
2011-08-19 14:06:00 -04:00
vp8_dequant_idct_add_uv_block
Reduced the size of Y1Dequant and friends to [128][2] This patch removes the local copies of the dequantize constants and implements John's idea as described in "Make a local copy of the dequantized data" commit. Change-Id: Ic6b7d681f00bf63263f71ff1e39ab2f80729e8b2
2012-01-04 11:56:50 -05:00
(xd->qcoeff+16*16, xd->dequant_uv,
Remove usage of predict buffer for decode Instead of using the predict buffer, the decoder now writes the predictor into the recon buffer. For blocks with eob=0, unnecessary idcts can be eliminated. This gave a performance boost of ~1.8% for the HD clips used. Tero: Added needed changes to ARM side and scheduled some assembly code to prevent interlocks. Patch Set 6: Merged (I1bcdca7a95aacc3a181b9faa6b10e3a71ee24df3) into this commit because of similarities in the idct functions. Patch Set 7: EC bug fix. Change-Id: Ie31d90b5d3522e1108163f2ac491e455e3f955e6
2011-10-18 12:06:50 -04:00
xd->dst.u_buffer, xd->dst.v_buffer,
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
xd->dst.uv_stride, xd->eobs+16);
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
}
Initial WebM release
2010-05-18 11:58:33 -04:00
Increase static linkage, remove unused functions A large number of functions were defined with external linkage, even though they were only used from within one file. This patch changes their linkage to static and removes the vp8_ prefix from their names, which should make it more obvious to the reader that the function is contained within the current translation unit. Functions that were not referenced were removed. These symbols were identified by: $ nm -A libvpx.a | sort -k3 | uniq -c -f2 | grep ' [A-Z] ' \ | sort | grep '^ *1 ' Change-Id: I59609f58ab65312012c047036ae1e0634f795779
2011-03-17 17:07:59 -04:00
static THREAD_FUNCTION thread_decoding_proc(void *p_data)
Initial WebM release
2010-05-18 11:58:33 -04:00
{
int ithread = ((DECODETHREAD_DATA *)p_data)->ithread;
VP8D_COMP *pbi = (VP8D_COMP *)(((DECODETHREAD_DATA *)p_data)->ptr1);
MB_ROW_DEC *mbrd = (MB_ROW_DEC *)(((DECODETHREAD_DATA *)p_data)->ptr2);
Changed above and left context data layout The main reason for the change was to reduce cycles in the token decoder. (~1.5% gain for 32 bit) This layout should be more cache friendly. As a result of this change, the encoder had to be updated. Change-Id: Id5e804169d8889da0378b3a519ac04dabd28c837 Note: dixie uses a similar layout
2010-08-31 10:49:57 -04:00
ENTROPY_CONTEXT_PLANES mb_row_left_context;
Initial WebM release
2010-05-18 11:58:33 -04:00
while (1)
{
if (pbi->b_multithreaded_rd == 0)
break;
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/*if(WaitForSingleObject(pbi->h_event_start_decoding[ithread], INFINITE) == WAIT_OBJECT_0)*/
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
if (sem_wait(&pbi->h_event_start_decoding[ithread]) == 0)
Initial WebM release
2010-05-18 11:58:33 -04:00
{
if (pbi->b_multithreaded_rd == 0)
break;
else
{
VP8_COMMON *pc = &pbi->common;
MACROBLOCKD *xd = &mbrd->mbd;
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
int mb_row;
int num_part = 1 << pbi->common.multi_token_partition;
Initial WebM release
2010-05-18 11:58:33 -04:00
volatile int *last_row_current_mb_col;
Adjust multi-thread sync ranges according to image sizes In multi-threaded decoder, set different sync ranges for different video resolutions. Change-Id: Iea48fd36f51919e0152c8ed3b1f10e1b723c0ca7
2010-09-23 13:53:09 -04:00
int nsync = pbi->sync_range;
Initial WebM release
2010-05-18 11:58:33 -04:00
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
for (mb_row = ithread+1; mb_row < pc->mb_rows; mb_row += (pbi->decoding_thread_count + 1))
Initial WebM release
2010-05-18 11:58:33 -04:00
{
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
int i;
int recon_yoffset, recon_uvoffset;
int mb_col;
int ref_fb_idx = pc->lst_fb_idx;
int dst_fb_idx = pc->new_fb_idx;
int recon_y_stride = pc->yv12_fb[ref_fb_idx].y_stride;
int recon_uv_stride = pc->yv12_fb[ref_fb_idx].uv_stride;
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
int filter_level;
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
loop_filter_info_n *lfi_n = &pc->lf_info;
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
pbi->mb_row_di[ithread].mb_row = mb_row;
pbi->mb_row_di[ithread].mbd.current_bc = &pbi->mbc[mb_row%num_part];
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
last_row_current_mb_col = &pbi->mt_current_mb_col[mb_row -1];
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
recon_yoffset = mb_row * recon_y_stride * 16;
recon_uvoffset = mb_row * recon_uv_stride * 8;
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* reset above block coeffs */
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
Changed above and left context data layout The main reason for the change was to reduce cycles in the token decoder. (~1.5% gain for 32 bit) This layout should be more cache friendly. As a result of this change, the encoder had to be updated. Change-Id: Id5e804169d8889da0378b3a519ac04dabd28c837 Note: dixie uses a similar layout
2010-08-31 10:49:57 -04:00
xd->above_context = pc->above_context;
xd->left_context = &mb_row_left_context;
vpx_memset(&mb_row_left_context, 0, sizeof(mb_row_left_context));
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
xd->up_available = (mb_row != 0);
xd->mb_to_top_edge = -((mb_row * 16)) << 3;
xd->mb_to_bottom_edge = ((pc->mb_rows - 1 - mb_row) * 16) << 3;
for (mb_col = 0; mb_col < pc->mb_cols; mb_col++)
Initial WebM release
2010-05-18 11:58:33 -04:00
{
Adjust multi-thread sync ranges according to image sizes In multi-threaded decoder, set different sync ranges for different video resolutions. Change-Id: Iea48fd36f51919e0152c8ed3b1f10e1b723c0ca7
2010-09-23 13:53:09 -04:00
if ((mb_col & (nsync-1)) == 0)
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
{
Adjust multi-thread sync ranges according to image sizes In multi-threaded decoder, set different sync ranges for different video resolutions. Change-Id: Iea48fd36f51919e0152c8ed3b1f10e1b723c0ca7
2010-09-23 13:53:09 -04:00
while (mb_col > (*last_row_current_mb_col - nsync) && *last_row_current_mb_col != pc->mb_cols - 1)
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
{
x86_pause_hint();
thread_sleep(0);
}
}
Initial WebM release
2010-05-18 11:58:33 -04:00
Adding support for error concealment in multi-threaded decoding Also includes a couple of error concealment bug fixes: - the segment_id wasn't properly initialized when missing - when interpolating and no neighbors are found, set to zero - clear the qcoef buffer when concealing an MB Change-Id: Id79c876b41d78b559a2241e9cd0fd2cae6198f49
2011-06-16 11:44:50 +02:00
/* Distance of MB to the various image edges.
* These are specified to 8th pel as they are always
* compared to values that are in 1/8th pel units.
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
*/
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
xd->mb_to_left_edge = -((mb_col * 16) << 3);
xd->mb_to_right_edge = ((pc->mb_cols - 1 - mb_col) * 16) << 3;
Initial WebM release
2010-05-18 11:58:33 -04:00
Adding support for error concealment in multi-threaded decoding Also includes a couple of error concealment bug fixes: - the segment_id wasn't properly initialized when missing - when interpolating and no neighbors are found, set to zero - clear the qcoef buffer when concealing an MB Change-Id: Id79c876b41d78b559a2241e9cd0fd2cae6198f49
2011-06-16 11:44:50 +02:00
#if CONFIG_ERROR_CONCEALMENT
{
Disable error concealment until first key frame is decoded When error concealment is enabled the first key frame must be successfully received before error concealment is activated. Error concealment will be activated when the delta following delta frame is received. Also fixed a couple of bugs related to error tracking in multi-threading. And avoiding decoding corrupt residual when we have multiple non-resilient partitions. Change-Id: I45c4bb296e2f05f57624aef500a874faf431a60d
2011-08-08 10:56:20 +02:00
int corrupt_residual =
(!pbi->independent_partitions &&
pbi->frame_corrupt_residual) ||
vp8dx_bool_error(xd->current_bc);
if (pbi->ec_active &&
(xd->mode_info_context->mbmi.ref_frame ==
INTRA_FRAME) &&
corrupt_residual)
{
/* We have an intra block with corrupt
* coefficients, better to conceal with an inter
* block.
* Interpolate MVs from neighboring MBs
*
* Note that for the first mb with corrupt
* residual in a frame, we might not discover
* that before decoding the residual. That
* happens after this check, and therefore no
* inter concealment will be done.
*/
vp8_interpolate_motion(xd,
mb_row, mb_col,
pc->mb_rows, pc->mb_cols,
pc->mode_info_stride);
}
Adding support for error concealment in multi-threaded decoding Also includes a couple of error concealment bug fixes: - the segment_id wasn't properly initialized when missing - when interpolating and no neighbors are found, set to zero - clear the qcoef buffer when concealing an MB Change-Id: Id79c876b41d78b559a2241e9cd0fd2cae6198f49
2011-06-16 11:44:50 +02:00
}
#endif
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
xd->dst.y_buffer = pc->yv12_fb[dst_fb_idx].y_buffer + recon_yoffset;
xd->dst.u_buffer = pc->yv12_fb[dst_fb_idx].u_buffer + recon_uvoffset;
xd->dst.v_buffer = pc->yv12_fb[dst_fb_idx].v_buffer + recon_uvoffset;
Initial WebM release
2010-05-18 11:58:33 -04:00
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
xd->left_available = (mb_col != 0);
Swap alt/gold/new/last frame buffer ptrs instead of copying. At the end of the decode, frame buffers were being copied. The frames are not updated after the copy, they are just for reference on later frames. This change allows multiple references to the same frame buffer instead of copying it. Changes needed to be made to the encoder to handle this. The encoder is still doing frame buffer copies in similar places where pointer reference could be done. Change-Id: I7c38be4d23979cc49b5f17241ca3a78703803e66
2010-07-22 08:07:32 -04:00
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* Select the appropriate reference frame for this MB */
Removed unnecessary MB_MODE_INFO copies These copies occurred for each macroblock in the encoder and decoder. Thetemp MB_MODE_INFO mbmi was removed from MACROBLOCKD. As a result, a large number compile errors had to be fixed. Change-Id: I4cf0ffae3ce244f6db04a4c217d52dd256382cf3
2010-08-12 16:25:43 -04:00
if (xd->mode_info_context->mbmi.ref_frame == LAST_FRAME)
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
ref_fb_idx = pc->lst_fb_idx;
Removed unnecessary MB_MODE_INFO copies These copies occurred for each macroblock in the encoder and decoder. Thetemp MB_MODE_INFO mbmi was removed from MACROBLOCKD. As a result, a large number compile errors had to be fixed. Change-Id: I4cf0ffae3ce244f6db04a4c217d52dd256382cf3
2010-08-12 16:25:43 -04:00
else if (xd->mode_info_context->mbmi.ref_frame == GOLDEN_FRAME)
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
ref_fb_idx = pc->gld_fb_idx;
else
ref_fb_idx = pc->alt_fb_idx;
Initial WebM release
2010-05-18 11:58:33 -04:00
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
xd->pre.y_buffer = pc->yv12_fb[ref_fb_idx].y_buffer + recon_yoffset;
xd->pre.u_buffer = pc->yv12_fb[ref_fb_idx].u_buffer + recon_uvoffset;
xd->pre.v_buffer = pc->yv12_fb[ref_fb_idx].v_buffer + recon_uvoffset;
Initial WebM release
2010-05-18 11:58:33 -04:00
Disable error concealment until first key frame is decoded When error concealment is enabled the first key frame must be successfully received before error concealment is activated. Error concealment will be activated when the delta following delta frame is received. Also fixed a couple of bugs related to error tracking in multi-threading. And avoiding decoding corrupt residual when we have multiple non-resilient partitions. Change-Id: I45c4bb296e2f05f57624aef500a874faf431a60d
2011-08-08 10:56:20 +02:00
if (xd->mode_info_context->mbmi.ref_frame !=
INTRA_FRAME)
{
/* propagate errors from reference frames */
xd->corrupted |= pc->yv12_fb[ref_fb_idx].corrupted;
}
Increase static linkage, remove unused functions A large number of functions were defined with external linkage, even though they were only used from within one file. This patch changes their linkage to static and removes the vp8_ prefix from their names, which should make it more obvious to the reader that the function is contained within the current translation unit. Functions that were not referenced were removed. These symbols were identified by: $ nm -A libvpx.a | sort -k3 | uniq -c -f2 | grep ' [A-Z] ' \ | sort | grep '^ *1 ' Change-Id: I59609f58ab65312012c047036ae1e0634f795779
2011-03-17 17:07:59 -04:00
decode_macroblock(pbi, xd, mb_row, mb_col);
Initial WebM release
2010-05-18 11:58:33 -04:00
Disable error concealment until first key frame is decoded When error concealment is enabled the first key frame must be successfully received before error concealment is activated. Error concealment will be activated when the delta following delta frame is received. Also fixed a couple of bugs related to error tracking in multi-threading. And avoiding decoding corrupt residual when we have multiple non-resilient partitions. Change-Id: I45c4bb296e2f05f57624aef500a874faf431a60d
2011-08-08 10:56:20 +02:00
/* check if the boolean decoder has suffered an error */
xd->corrupted |= vp8dx_bool_error(xd->current_bc);
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if (pbi->common.filter_level)
{
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
int skip_lf = (xd->mode_info_context->mbmi.mode != B_PRED &&
xd->mode_info_context->mbmi.mode != SPLITMV &&
xd->mode_info_context->mbmi.mb_skip_coeff);
const int mode_index = lfi_n->mode_lf_lut[xd->mode_info_context->mbmi.mode];
const int seg = xd->mode_info_context->mbmi.segment_id;
const int ref_frame = xd->mode_info_context->mbmi.ref_frame;
filter_level = lfi_n->lvl[seg][ref_frame][mode_index];
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if( mb_row != pc->mb_rows-1 )
{
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* Save decoded MB last row data for next-row decoding */
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
vpx_memcpy((pbi->mt_yabove_row[mb_row + 1] + 32 + mb_col*16), (xd->dst.y_buffer + 15 * recon_y_stride), 16);
vpx_memcpy((pbi->mt_uabove_row[mb_row + 1] + 16 + mb_col*8), (xd->dst.u_buffer + 7 * recon_uv_stride), 8);
vpx_memcpy((pbi->mt_vabove_row[mb_row + 1] + 16 + mb_col*8), (xd->dst.v_buffer + 7 * recon_uv_stride), 8);
}
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* save left_col for next MB decoding */
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if(mb_col != pc->mb_cols-1)
{
MODE_INFO *next = xd->mode_info_context +1;
Remove redundant check for KEY_FRAME in multithreaded decoder For Intra blocks is enough to check ref_frame == INTRA_FRAME. Change-Id: I3e2d3064c7642658a9e14011a4627de58878e366
2011-06-13 15:13:10 +03:00
if (next->mbmi.ref_frame == INTRA_FRAME)
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
{
for (i = 0; i < 16; i++)
pbi->mt_yleft_col[mb_row][i] = xd->dst.y_buffer [i* recon_y_stride + 15];
for (i = 0; i < 8; i++)
{
pbi->mt_uleft_col[mb_row][i] = xd->dst.u_buffer [i* recon_uv_stride + 7];
pbi->mt_vleft_col[mb_row][i] = xd->dst.v_buffer [i* recon_uv_stride + 7];
}
}
}
Fix an unused variable warning. Move the update of the loopfilter info to the same block where it is used. GCC 4.5 is not able trace the initialization of the local filter_info across the other calls between the two conditionals on pbi->common and issues an uninitialized variable warning. Change-Id: Ie4487b3714a096b3fb21608f6b0c74e745e3c6fc
2011-03-08 14:51:23 -08:00
/* loopfilter on this macroblock. */
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if (filter_level)
{
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
if(pc->filter_type == NORMAL_LOOPFILTER)
{
loop_filter_info lfi;
FRAME_TYPE frame_type = pc->frame_type;
const int hev_index = lfi_n->hev_thr_lut[frame_type][filter_level];
lfi.mblim = lfi_n->mblim[filter_level];
lfi.blim = lfi_n->blim[filter_level];
lfi.lim = lfi_n->lim[filter_level];
lfi.hev_thr = lfi_n->hev_thr[hev_index];
if (mb_col > 0)
RTCD: add loopfilter functions This commit continues the process of converting to the new RTCD system. Change-Id: Ic8a4047d72ff3a54ec98977dd90e70c13213db71
2012-01-12 16:15:42 -08:00
vp8_loop_filter_mbv
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
(xd->dst.y_buffer, xd->dst.u_buffer, xd->dst.v_buffer, recon_y_stride, recon_uv_stride, &lfi);
if (!skip_lf)
RTCD: add loopfilter functions This commit continues the process of converting to the new RTCD system. Change-Id: Ic8a4047d72ff3a54ec98977dd90e70c13213db71
2012-01-12 16:15:42 -08:00
vp8_loop_filter_bv
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
(xd->dst.y_buffer, xd->dst.u_buffer, xd->dst.v_buffer, recon_y_stride, recon_uv_stride, &lfi);
/* don't apply across umv border */
if (mb_row > 0)
RTCD: add loopfilter functions This commit continues the process of converting to the new RTCD system. Change-Id: Ic8a4047d72ff3a54ec98977dd90e70c13213db71
2012-01-12 16:15:42 -08:00
vp8_loop_filter_mbh
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
(xd->dst.y_buffer, xd->dst.u_buffer, xd->dst.v_buffer, recon_y_stride, recon_uv_stride, &lfi);
if (!skip_lf)
RTCD: add loopfilter functions This commit continues the process of converting to the new RTCD system. Change-Id: Ic8a4047d72ff3a54ec98977dd90e70c13213db71
2012-01-12 16:15:42 -08:00
vp8_loop_filter_bh
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
(xd->dst.y_buffer, xd->dst.u_buffer, xd->dst.v_buffer, recon_y_stride, recon_uv_stride, &lfi);
}
else
{
if (mb_col > 0)
RTCD: add loopfilter functions This commit continues the process of converting to the new RTCD system. Change-Id: Ic8a4047d72ff3a54ec98977dd90e70c13213db71
2012-01-12 16:15:42 -08:00
vp8_loop_filter_simple_mbv
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
(xd->dst.y_buffer, recon_y_stride, lfi_n->mblim[filter_level]);
if (!skip_lf)
RTCD: add loopfilter functions This commit continues the process of converting to the new RTCD system. Change-Id: Ic8a4047d72ff3a54ec98977dd90e70c13213db71
2012-01-12 16:15:42 -08:00
vp8_loop_filter_simple_bv
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
(xd->dst.y_buffer, recon_y_stride, lfi_n->blim[filter_level]);
/* don't apply across umv border */
if (mb_row > 0)
RTCD: add loopfilter functions This commit continues the process of converting to the new RTCD system. Change-Id: Ic8a4047d72ff3a54ec98977dd90e70c13213db71
2012-01-12 16:15:42 -08:00
vp8_loop_filter_simple_mbh
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
(xd->dst.y_buffer, recon_y_stride, lfi_n->mblim[filter_level]);
if (!skip_lf)
RTCD: add loopfilter functions This commit continues the process of converting to the new RTCD system. Change-Id: Ic8a4047d72ff3a54ec98977dd90e70c13213db71
2012-01-12 16:15:42 -08:00
vp8_loop_filter_simple_bh
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
(xd->dst.y_buffer, recon_y_stride, lfi_n->blim[filter_level]);
}
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
}
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
}
Initial WebM release
2010-05-18 11:58:33 -04:00
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
recon_yoffset += 16;
recon_uvoffset += 8;
Initial WebM release
2010-05-18 11:58:33 -04:00
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
++xd->mode_info_context; /* next mb */
Initial WebM release
2010-05-18 11:58:33 -04:00
Changed above and left context data layout The main reason for the change was to reduce cycles in the token decoder. (~1.5% gain for 32 bit) This layout should be more cache friendly. As a result of this change, the encoder had to be updated. Change-Id: Id5e804169d8889da0378b3a519ac04dabd28c837 Note: dixie uses a similar layout
2010-08-31 10:49:57 -04:00
xd->above_context++;
Initial WebM release
2010-05-18 11:58:33 -04:00
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/*pbi->mb_row_di[ithread].current_mb_col = mb_col;*/
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
pbi->mt_current_mb_col[mb_row] = mb_col;
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
}
Initial WebM release
2010-05-18 11:58:33 -04:00
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* adjust to the next row of mbs */
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if (pbi->common.filter_level)
{
if(mb_row != pc->mb_rows-1)
{
int lasty = pc->yv12_fb[ref_fb_idx].y_width + VP8BORDERINPIXELS;
int lastuv = (pc->yv12_fb[ref_fb_idx].y_width>>1) + (VP8BORDERINPIXELS>>1);
for (i = 0; i < 4; i++)
{
pbi->mt_yabove_row[mb_row +1][lasty + i] = pbi->mt_yabove_row[mb_row +1][lasty -1];
pbi->mt_uabove_row[mb_row +1][lastuv + i] = pbi->mt_uabove_row[mb_row +1][lastuv -1];
pbi->mt_vabove_row[mb_row +1][lastuv + i] = pbi->mt_vabove_row[mb_row +1][lastuv -1];
}
}
} else
vp8_extend_mb_row(&pc->yv12_fb[dst_fb_idx], xd->dst.y_buffer + 16, xd->dst.u_buffer + 8, xd->dst.v_buffer + 8);
Initial WebM release
2010-05-18 11:58:33 -04:00
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
++xd->mode_info_context; /* skip prediction column */
Initial WebM release
2010-05-18 11:58:33 -04:00
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* since we have multithread */
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
xd->mode_info_context += xd->mode_info_stride * pbi->decoding_thread_count;
Initial WebM release
2010-05-18 11:58:33 -04:00
}
}
}
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* add this to each frame */
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
if ((mbrd->mb_row == pbi->common.mb_rows-1) || ((mbrd->mb_row == pbi->common.mb_rows-2) && (pbi->common.mb_rows % (pbi->decoding_thread_count+1))==1))
{
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/*SetEvent(pbi->h_event_end_decoding);*/
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
sem_post(&pbi->h_event_end_decoding);
}
}
Initial WebM release
2010-05-18 11:58:33 -04:00
return 0 ;
}
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
void vp8_decoder_create_threads(VP8D_COMP *pbi)
Initial WebM release
2010-05-18 11:58:33 -04:00
{
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
int core_count = 0;
int ithread;
Initial WebM release
2010-05-18 11:58:33 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
pbi->b_multithreaded_rd = 0;
pbi->allocated_decoding_thread_count = 0;
Runtime detection of available processor cores. Detect the number of available cores and limit the thread allocation accordingly. On decoder side limit the number of threads to the max number of token partition. Core detetction works on Windows and Posix platforms, which define _SC_NPROCESSORS_ONLN or _SC_NPROC_ONLN. Change-Id: I76cbe37c18d3b8035e508b7a1795577674efc078
2011-03-25 12:53:03 +02:00
/* limit decoding threads to the max number of token partitions */
core_count = (pbi->max_threads > 8) ? 8 : pbi->max_threads;
/* limit decoding threads to the available cores */
if (core_count > pbi->common.processor_core_count)
core_count = pbi->common.processor_core_count;
Initial WebM release
2010-05-18 11:58:33 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if (core_count > 1)
{
pbi->b_multithreaded_rd = 1;
Runtime detection of available processor cores. Detect the number of available cores and limit the thread allocation accordingly. On decoder side limit the number of threads to the max number of token partition. Core detetction works on Windows and Posix platforms, which define _SC_NPROCESSORS_ONLN or _SC_NPROC_ONLN. Change-Id: I76cbe37c18d3b8035e508b7a1795577674efc078
2011-03-25 12:53:03 +02:00
pbi->decoding_thread_count = core_count - 1;
Initial WebM release
2010-05-18 11:58:33 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
CHECK_MEM_ERROR(pbi->h_decoding_thread, vpx_malloc(sizeof(pthread_t) * pbi->decoding_thread_count));
CHECK_MEM_ERROR(pbi->h_event_start_decoding, vpx_malloc(sizeof(sem_t) * pbi->decoding_thread_count));
CHECK_MEM_ERROR(pbi->mb_row_di, vpx_memalign(32, sizeof(MB_ROW_DEC) * pbi->decoding_thread_count));
vpx_memset(pbi->mb_row_di, 0, sizeof(MB_ROW_DEC) * pbi->decoding_thread_count);
CHECK_MEM_ERROR(pbi->de_thread_data, vpx_malloc(sizeof(DECODETHREAD_DATA) * pbi->decoding_thread_count));
Initial WebM release
2010-05-18 11:58:33 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
for (ithread = 0; ithread < pbi->decoding_thread_count; ithread++)
{
sem_init(&pbi->h_event_start_decoding[ithread], 0, 0);
Initial WebM release
2010-05-18 11:58:33 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
pbi->de_thread_data[ithread].ithread = ithread;
pbi->de_thread_data[ithread].ptr1 = (void *)pbi;
pbi->de_thread_data[ithread].ptr2 = (void *) &pbi->mb_row_di[ithread];
Initial WebM release
2010-05-18 11:58:33 -04:00
Increase static linkage, remove unused functions A large number of functions were defined with external linkage, even though they were only used from within one file. This patch changes their linkage to static and removes the vp8_ prefix from their names, which should make it more obvious to the reader that the function is contained within the current translation unit. Functions that were not referenced were removed. These symbols were identified by: $ nm -A libvpx.a | sort -k3 | uniq -c -f2 | grep ' [A-Z] ' \ | sort | grep '^ *1 ' Change-Id: I59609f58ab65312012c047036ae1e0634f795779
2011-03-17 17:07:59 -04:00
pthread_create(&pbi->h_decoding_thread[ithread], 0, thread_decoding_proc, (&pbi->de_thread_data[ithread]));
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
}
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
sem_init(&pbi->h_event_end_decoding, 0, 0);
Initial WebM release
2010-05-18 11:58:33 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
pbi->allocated_decoding_thread_count = pbi->decoding_thread_count;
}
}
Initial WebM release
2010-05-18 11:58:33 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
void vp8mt_de_alloc_temp_buffers(VP8D_COMP *pbi, int mb_rows)
{
int i;
Initial WebM release
2010-05-18 11:58:33 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if (pbi->b_multithreaded_rd)
{
vpx_free(pbi->mt_current_mb_col);
pbi->mt_current_mb_col = NULL ;
Initial WebM release
2010-05-18 11:58:33 -04:00
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* Free above_row buffers. */
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if (pbi->mt_yabove_row)
{
for (i=0; i< mb_rows; i++)
{
vpx_free(pbi->mt_yabove_row[i]);
pbi->mt_yabove_row[i] = NULL ;
}
vpx_free(pbi->mt_yabove_row);
pbi->mt_yabove_row = NULL ;
}
Initial WebM release
2010-05-18 11:58:33 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if (pbi->mt_uabove_row)
{
for (i=0; i< mb_rows; i++)
{
vpx_free(pbi->mt_uabove_row[i]);
pbi->mt_uabove_row[i] = NULL ;
}
vpx_free(pbi->mt_uabove_row);
pbi->mt_uabove_row = NULL ;
}
Initial WebM release
2010-05-18 11:58:33 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if (pbi->mt_vabove_row)
{
for (i=0; i< mb_rows; i++)
{
vpx_free(pbi->mt_vabove_row[i]);
pbi->mt_vabove_row[i] = NULL ;
}
vpx_free(pbi->mt_vabove_row);
pbi->mt_vabove_row = NULL ;
}
Initial WebM release
2010-05-18 11:58:33 -04:00
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* Free left_col buffers. */
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if (pbi->mt_yleft_col)
{
for (i=0; i< mb_rows; i++)
{
vpx_free(pbi->mt_yleft_col[i]);
pbi->mt_yleft_col[i] = NULL ;
}
vpx_free(pbi->mt_yleft_col);
pbi->mt_yleft_col = NULL ;
}
Initial WebM release
2010-05-18 11:58:33 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if (pbi->mt_uleft_col)
{
for (i=0; i< mb_rows; i++)
{
vpx_free(pbi->mt_uleft_col[i]);
pbi->mt_uleft_col[i] = NULL ;
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
}
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
vpx_free(pbi->mt_uleft_col);
pbi->mt_uleft_col = NULL ;
Initial WebM release
2010-05-18 11:58:33 -04:00
}
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if (pbi->mt_vleft_col)
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
{
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
for (i=0; i< mb_rows; i++)
{
vpx_free(pbi->mt_vleft_col[i]);
pbi->mt_vleft_col[i] = NULL ;
}
vpx_free(pbi->mt_vleft_col);
pbi->mt_vleft_col = NULL ;
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
}
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
}
Initial WebM release
2010-05-18 11:58:33 -04:00
}
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
vp8mt_alloc_temp_buffers: make prototype return void This function was never called in a context expecting a return value, the return value was always a constant, and the !CONFIG_MULTITHREAD path didn't have a return statement, which caused a compiler warning. This patch changes the function to return void instead. Fixes issue #231 Change-Id: I9ef7f56e54418b7265026c54fc4ed5660c1418d1
2010-11-17 09:13:54 -05:00
void vp8mt_alloc_temp_buffers(VP8D_COMP *pbi, int width, int prev_mb_rows)
Initial WebM release
2010-05-18 11:58:33 -04:00
{
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
VP8_COMMON *const pc = & pbi->common;
int i;
int uv_width;
Initial WebM release
2010-05-18 11:58:33 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if (pbi->b_multithreaded_rd)
Initial WebM release
2010-05-18 11:58:33 -04:00
{
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
vp8mt_de_alloc_temp_buffers(pbi, prev_mb_rows);
Initial WebM release
2010-05-18 11:58:33 -04:00
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* our internal buffers are always multiples of 16 */
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if ((width & 0xf) != 0)
width += 16 - (width & 0xf);
Initial WebM release
2010-05-18 11:58:33 -04:00
Adjust multi-thread sync ranges according to image sizes In multi-threaded decoder, set different sync ranges for different video resolutions. Change-Id: Iea48fd36f51919e0152c8ed3b1f10e1b723c0ca7
2010-09-23 13:53:09 -04:00
if (width < 640) pbi->sync_range = 1;
else if (width <= 1280) pbi->sync_range = 8;
else if (width <= 2560) pbi->sync_range =16;
else pbi->sync_range = 32;
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
uv_width = width >>1;
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* Allocate an int for each mb row. */
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
CHECK_MEM_ERROR(pbi->mt_current_mb_col, vpx_malloc(sizeof(int) * pc->mb_rows));
Initial WebM release
2010-05-18 11:58:33 -04:00
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* Allocate memory for above_row buffers. */
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
CHECK_MEM_ERROR(pbi->mt_yabove_row, vpx_malloc(sizeof(unsigned char *) * pc->mb_rows));
for (i=0; i< pc->mb_rows; i++)
CHECK_MEM_ERROR(pbi->mt_yabove_row[i], vpx_calloc(sizeof(unsigned char) * (width + (VP8BORDERINPIXELS<<1)), 1));
Initial WebM release
2010-05-18 11:58:33 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
CHECK_MEM_ERROR(pbi->mt_uabove_row, vpx_malloc(sizeof(unsigned char *) * pc->mb_rows));
for (i=0; i< pc->mb_rows; i++)
CHECK_MEM_ERROR(pbi->mt_uabove_row[i], vpx_calloc(sizeof(unsigned char) * (uv_width + VP8BORDERINPIXELS), 1));
Initial WebM release
2010-05-18 11:58:33 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
CHECK_MEM_ERROR(pbi->mt_vabove_row, vpx_malloc(sizeof(unsigned char *) * pc->mb_rows));
for (i=0; i< pc->mb_rows; i++)
CHECK_MEM_ERROR(pbi->mt_vabove_row[i], vpx_calloc(sizeof(unsigned char) * (uv_width + VP8BORDERINPIXELS), 1));
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* Allocate memory for left_col buffers. */
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
CHECK_MEM_ERROR(pbi->mt_yleft_col, vpx_malloc(sizeof(unsigned char *) * pc->mb_rows));
for (i=0; i< pc->mb_rows; i++)
CHECK_MEM_ERROR(pbi->mt_yleft_col[i], vpx_calloc(sizeof(unsigned char) * 16, 1));
Initial WebM release
2010-05-18 11:58:33 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
CHECK_MEM_ERROR(pbi->mt_uleft_col, vpx_malloc(sizeof(unsigned char *) * pc->mb_rows));
for (i=0; i< pc->mb_rows; i++)
CHECK_MEM_ERROR(pbi->mt_uleft_col[i], vpx_calloc(sizeof(unsigned char) * 8, 1));
CHECK_MEM_ERROR(pbi->mt_vleft_col, vpx_malloc(sizeof(unsigned char *) * pc->mb_rows));
for (i=0; i< pc->mb_rows; i++)
CHECK_MEM_ERROR(pbi->mt_vleft_col[i], vpx_calloc(sizeof(unsigned char) * 8, 1));
}
Initial WebM release
2010-05-18 11:58:33 -04:00
}
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
Initial WebM release
2010-05-18 11:58:33 -04:00
void vp8_decoder_remove_threads(VP8D_COMP *pbi)
{
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* shutdown MB Decoding thread; */
Initial WebM release
2010-05-18 11:58:33 -04:00
if (pbi->b_multithreaded_rd)
{
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
int i;
Initial WebM release
2010-05-18 11:58:33 -04:00
pbi->b_multithreaded_rd = 0;
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* allow all threads to exit */
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
for (i = 0; i < pbi->allocated_decoding_thread_count; i++)
Initial WebM release
2010-05-18 11:58:33 -04:00
{
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
sem_post(&pbi->h_event_start_decoding[i]);
pthread_join(pbi->h_decoding_thread[i], NULL);
Initial WebM release
2010-05-18 11:58:33 -04:00
}
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
for (i = 0; i < pbi->allocated_decoding_thread_count; i++)
{
sem_destroy(&pbi->h_event_start_decoding[i]);
Initial WebM release
2010-05-18 11:58:33 -04:00
}
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
sem_destroy(&pbi->h_event_end_decoding);
Initial WebM release
2010-05-18 11:58:33 -04:00
vpx_free(pbi->h_decoding_thread);
pbi->h_decoding_thread = NULL;
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
vpx_free(pbi->h_event_start_decoding);
pbi->h_event_start_decoding = NULL;
Initial WebM release
2010-05-18 11:58:33 -04:00
vpx_free(pbi->mb_row_di);
pbi->mb_row_di = NULL ;
vpx_free(pbi->de_thread_data);
pbi->de_thread_data = NULL;
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
}
Initial WebM release
2010-05-18 11:58:33 -04:00
}
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
void vp8mt_decode_mb_rows( VP8D_COMP *pbi, MACROBLOCKD *xd)
Initial WebM release
2010-05-18 11:58:33 -04:00
{
int mb_row;
VP8_COMMON *pc = &pbi->common;
int num_part = 1 << pbi->common.multi_token_partition;
Remove unused local variables Removing unused local variables causing compiler warnings in Visual Studio. Change-Id: I0e2096303be1fdbc01428a6e57cca9796bb32c8a
2011-01-11 13:01:24 +01:00
int i;
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
volatile int *last_row_current_mb_col = NULL;
Adjust multi-thread sync ranges according to image sizes In multi-threaded decoder, set different sync ranges for different video resolutions. Change-Id: Iea48fd36f51919e0152c8ed3b1f10e1b723c0ca7
2010-09-23 13:53:09 -04:00
int nsync = pbi->sync_range;
Initial WebM release
2010-05-18 11:58:33 -04:00
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
int filter_level = pc->filter_level;
loop_filter_info_n *lfi_n = &pc->lf_info;
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
if (filter_level)
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
{
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* Set above_row buffer to 127 for decoding first MB row */
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
vpx_memset(pbi->mt_yabove_row[0] + VP8BORDERINPIXELS-1, 127, pc->yv12_fb[pc->lst_fb_idx].y_width + 5);
vpx_memset(pbi->mt_uabove_row[0] + (VP8BORDERINPIXELS>>1)-1, 127, (pc->yv12_fb[pc->lst_fb_idx].y_width>>1) +5);
vpx_memset(pbi->mt_vabove_row[0] + (VP8BORDERINPIXELS>>1)-1, 127, (pc->yv12_fb[pc->lst_fb_idx].y_width>>1) +5);
for (i=1; i<pc->mb_rows; i++)
{
vpx_memset(pbi->mt_yabove_row[i] + VP8BORDERINPIXELS-1, (unsigned char)129, 1);
vpx_memset(pbi->mt_uabove_row[i] + (VP8BORDERINPIXELS>>1)-1, (unsigned char)129, 1);
vpx_memset(pbi->mt_vabove_row[i] + (VP8BORDERINPIXELS>>1)-1, (unsigned char)129, 1);
}
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* Set left_col to 129 initially */
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
for (i=0; i<pc->mb_rows; i++)
{
vpx_memset(pbi->mt_yleft_col[i], (unsigned char)129, 16);
vpx_memset(pbi->mt_uleft_col[i], (unsigned char)129, 8);
vpx_memset(pbi->mt_vleft_col[i], (unsigned char)129, 8);
}
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
/* Initialize the loop filter for this frame. */
fix sharpness bug and clean up sharpness was not recalculated in vp8cx_pick_filter_level_fast remove last_filter_type. all values are calculated, don't need to update the lfi data when it changes. always use cm->sharpness_level. the extra indirection was annoying. don't track last frame_type or sharpness_level manually. frame type only matters for motion search and sharpness_level is taken care of in frame_init move function declarations to their proper header Change-Id: I7ef037bd4bf8cf5e37d2d36bd03b5e22a2ad91db
2011-07-20 15:53:42 -04:00
vp8_loop_filter_frame_init(pc, &pbi->mb, filter_level);
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
}
Increase static linkage, remove unused functions A large number of functions were defined with external linkage, even though they were only used from within one file. This patch changes their linkage to static and removes the vp8_ prefix from their names, which should make it more obvious to the reader that the function is contained within the current translation unit. Functions that were not referenced were removed. These symbols were identified by: $ nm -A libvpx.a | sort -k3 | uniq -c -f2 | grep ' [A-Z] ' \ | sort | grep '^ *1 ' Change-Id: I59609f58ab65312012c047036ae1e0634f795779
2011-03-17 17:07:59 -04:00
setup_decoding_thread_data(pbi, xd, pbi->mb_row_di, pbi->decoding_thread_count);
Initial WebM release
2010-05-18 11:58:33 -04:00
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
for (i = 0; i < pbi->decoding_thread_count; i++)
sem_post(&pbi->h_event_start_decoding[i]);
Initial WebM release
2010-05-18 11:58:33 -04:00
for (mb_row = 0; mb_row < pc->mb_rows; mb_row += (pbi->decoding_thread_count + 1))
{
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
xd->current_bc = &pbi->mbc[mb_row%num_part];
Initial WebM release
2010-05-18 11:58:33 -04:00
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* vp8_decode_mb_row(pbi, pc, mb_row, xd); */
Initial WebM release
2010-05-18 11:58:33 -04:00
{
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
int i;
int recon_yoffset, recon_uvoffset;
int mb_col;
int ref_fb_idx = pc->lst_fb_idx;
int dst_fb_idx = pc->new_fb_idx;
int recon_y_stride = pc->yv12_fb[ref_fb_idx].y_stride;
int recon_uv_stride = pc->yv12_fb[ref_fb_idx].uv_stride;
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* volatile int *last_row_current_mb_col = NULL; */
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
if (mb_row > 0)
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
last_row_current_mb_col = &pbi->mt_current_mb_col[mb_row -1];
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
Changed above and left context data layout The main reason for the change was to reduce cycles in the token decoder. (~1.5% gain for 32 bit) This layout should be more cache friendly. As a result of this change, the encoder had to be updated. Change-Id: Id5e804169d8889da0378b3a519ac04dabd28c837 Note: dixie uses a similar layout
2010-08-31 10:49:57 -04:00
vpx_memset(&pc->left_context, 0, sizeof(pc->left_context));
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
recon_yoffset = mb_row * recon_y_stride * 16;
recon_uvoffset = mb_row * recon_uv_stride * 8;
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* reset above block coeffs */
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
Changed above and left context data layout The main reason for the change was to reduce cycles in the token decoder. (~1.5% gain for 32 bit) This layout should be more cache friendly. As a result of this change, the encoder had to be updated. Change-Id: Id5e804169d8889da0378b3a519ac04dabd28c837 Note: dixie uses a similar layout
2010-08-31 10:49:57 -04:00
xd->above_context = pc->above_context;
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
xd->up_available = (mb_row != 0);
xd->mb_to_top_edge = -((mb_row * 16)) << 3;
xd->mb_to_bottom_edge = ((pc->mb_rows - 1 - mb_row) * 16) << 3;
for (mb_col = 0; mb_col < pc->mb_cols; mb_col++)
{
Adjust multi-thread sync ranges according to image sizes In multi-threaded decoder, set different sync ranges for different video resolutions. Change-Id: Iea48fd36f51919e0152c8ed3b1f10e1b723c0ca7
2010-09-23 13:53:09 -04:00
if ( mb_row > 0 && (mb_col & (nsync-1)) == 0){
while (mb_col > (*last_row_current_mb_col - nsync) && *last_row_current_mb_col != pc->mb_cols - 1)
Replace sleep(0) calls in multi-threaded decoder This is a workaround for gLucid problem. Change-Id: I188a016a07e4c2ea212444c5a6284ff3c48a5caa
2010-08-30 18:16:04 -04:00
{
x86_pause_hint();
thread_sleep(0);
}
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
}
Initial WebM release
2010-05-18 11:58:33 -04:00
Adding support for error concealment in multi-threaded decoding Also includes a couple of error concealment bug fixes: - the segment_id wasn't properly initialized when missing - when interpolating and no neighbors are found, set to zero - clear the qcoef buffer when concealing an MB Change-Id: Id79c876b41d78b559a2241e9cd0fd2cae6198f49
2011-06-16 11:44:50 +02:00
/* Distance of MB to the various image edges.
* These are specified to 8th pel as they are always compared to
* values that are in 1/8th pel units.
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
*/
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
xd->mb_to_left_edge = -((mb_col * 16) << 3);
xd->mb_to_right_edge = ((pc->mb_cols - 1 - mb_col) * 16) << 3;
Adding support for error concealment in multi-threaded decoding Also includes a couple of error concealment bug fixes: - the segment_id wasn't properly initialized when missing - when interpolating and no neighbors are found, set to zero - clear the qcoef buffer when concealing an MB Change-Id: Id79c876b41d78b559a2241e9cd0fd2cae6198f49
2011-06-16 11:44:50 +02:00
#if CONFIG_ERROR_CONCEALMENT
{
Disable error concealment until first key frame is decoded When error concealment is enabled the first key frame must be successfully received before error concealment is activated. Error concealment will be activated when the delta following delta frame is received. Also fixed a couple of bugs related to error tracking in multi-threading. And avoiding decoding corrupt residual when we have multiple non-resilient partitions. Change-Id: I45c4bb296e2f05f57624aef500a874faf431a60d
2011-08-08 10:56:20 +02:00
int corrupt_residual = (!pbi->independent_partitions &&
pbi->frame_corrupt_residual) ||
vp8dx_bool_error(xd->current_bc);
if (pbi->ec_active &&
(xd->mode_info_context->mbmi.ref_frame == INTRA_FRAME) &&
corrupt_residual)
{
/* We have an intra block with corrupt coefficients,
* better to conceal with an inter block. Interpolate
* MVs from neighboring MBs
*
* Note that for the first mb with corrupt residual in a
* frame, we might not discover that before decoding the
* residual. That happens after this check, and
* therefore no inter concealment will be done.
*/
vp8_interpolate_motion(xd,
mb_row, mb_col,
pc->mb_rows, pc->mb_cols,
pc->mode_info_stride);
}
Adding support for error concealment in multi-threaded decoding Also includes a couple of error concealment bug fixes: - the segment_id wasn't properly initialized when missing - when interpolating and no neighbors are found, set to zero - clear the qcoef buffer when concealing an MB Change-Id: Id79c876b41d78b559a2241e9cd0fd2cae6198f49
2011-06-16 11:44:50 +02:00
}
#endif
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
xd->dst.y_buffer = pc->yv12_fb[dst_fb_idx].y_buffer + recon_yoffset;
xd->dst.u_buffer = pc->yv12_fb[dst_fb_idx].u_buffer + recon_uvoffset;
xd->dst.v_buffer = pc->yv12_fb[dst_fb_idx].v_buffer + recon_uvoffset;
xd->left_available = (mb_col != 0);
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* Select the appropriate reference frame for this MB */
Removed unnecessary MB_MODE_INFO copies These copies occurred for each macroblock in the encoder and decoder. Thetemp MB_MODE_INFO mbmi was removed from MACROBLOCKD. As a result, a large number compile errors had to be fixed. Change-Id: I4cf0ffae3ce244f6db04a4c217d52dd256382cf3
2010-08-12 16:25:43 -04:00
if (xd->mode_info_context->mbmi.ref_frame == LAST_FRAME)
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
ref_fb_idx = pc->lst_fb_idx;
Removed unnecessary MB_MODE_INFO copies These copies occurred for each macroblock in the encoder and decoder. Thetemp MB_MODE_INFO mbmi was removed from MACROBLOCKD. As a result, a large number compile errors had to be fixed. Change-Id: I4cf0ffae3ce244f6db04a4c217d52dd256382cf3
2010-08-12 16:25:43 -04:00
else if (xd->mode_info_context->mbmi.ref_frame == GOLDEN_FRAME)
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
ref_fb_idx = pc->gld_fb_idx;
else
ref_fb_idx = pc->alt_fb_idx;
xd->pre.y_buffer = pc->yv12_fb[ref_fb_idx].y_buffer + recon_yoffset;
xd->pre.u_buffer = pc->yv12_fb[ref_fb_idx].u_buffer + recon_uvoffset;
xd->pre.v_buffer = pc->yv12_fb[ref_fb_idx].v_buffer + recon_uvoffset;
Implement error tracking in the decoder A new vpx_codec_control called VP8D_GET_FRAME_CORRUPTED. The output from the function is non-zero if the last decoded frame contains corruption due to packet losses. The decoder is also modified to accept encoded frames of zero length. A zero length frame indicates to the decoder that one or more frames have been completely lost. This will mark the last decoded reference buffer as corrupted. The data pointer can be NULL if the length is zero. Change-Id: Ic5902c785a281c6e05329deea958554b7a6c75ce
2010-12-16 16:46:31 +01:00
if (xd->mode_info_context->mbmi.ref_frame != INTRA_FRAME)
{
/* propagate errors from reference frames */
xd->corrupted |= pc->yv12_fb[ref_fb_idx].corrupted;
}
Increase static linkage, remove unused functions A large number of functions were defined with external linkage, even though they were only used from within one file. This patch changes their linkage to static and removes the vp8_ prefix from their names, which should make it more obvious to the reader that the function is contained within the current translation unit. Functions that were not referenced were removed. These symbols were identified by: $ nm -A libvpx.a | sort -k3 | uniq -c -f2 | grep ' [A-Z] ' \ | sort | grep '^ *1 ' Change-Id: I59609f58ab65312012c047036ae1e0634f795779
2011-03-17 17:07:59 -04:00
decode_macroblock(pbi, xd, mb_row, mb_col);
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
Implement error tracking in the decoder A new vpx_codec_control called VP8D_GET_FRAME_CORRUPTED. The output from the function is non-zero if the last decoded frame contains corruption due to packet losses. The decoder is also modified to accept encoded frames of zero length. A zero length frame indicates to the decoder that one or more frames have been completely lost. This will mark the last decoded reference buffer as corrupted. The data pointer can be NULL if the length is zero. Change-Id: Ic5902c785a281c6e05329deea958554b7a6c75ce
2010-12-16 16:46:31 +01:00
/* check if the boolean decoder has suffered an error */
xd->corrupted |= vp8dx_bool_error(xd->current_bc);
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if (pbi->common.filter_level)
{
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
int skip_lf = (xd->mode_info_context->mbmi.mode != B_PRED &&
xd->mode_info_context->mbmi.mode != SPLITMV &&
xd->mode_info_context->mbmi.mb_skip_coeff);
const int mode_index = lfi_n->mode_lf_lut[xd->mode_info_context->mbmi.mode];
const int seg = xd->mode_info_context->mbmi.segment_id;
const int ref_frame = xd->mode_info_context->mbmi.ref_frame;
filter_level = lfi_n->lvl[seg][ref_frame][mode_index];
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* Save decoded MB last row data for next-row decoding */
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if(mb_row != pc->mb_rows-1)
{
vpx_memcpy((pbi->mt_yabove_row[mb_row +1] + 32 + mb_col*16), (xd->dst.y_buffer + 15 * recon_y_stride), 16);
vpx_memcpy((pbi->mt_uabove_row[mb_row +1] + 16 + mb_col*8), (xd->dst.u_buffer + 7 * recon_uv_stride), 8);
vpx_memcpy((pbi->mt_vabove_row[mb_row +1] + 16 + mb_col*8), (xd->dst.v_buffer + 7 * recon_uv_stride), 8);
}
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* save left_col for next MB decoding */
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if(mb_col != pc->mb_cols-1)
{
MODE_INFO *next = xd->mode_info_context +1;
Remove redundant check for KEY_FRAME in multithreaded decoder For Intra blocks is enough to check ref_frame == INTRA_FRAME. Change-Id: I3e2d3064c7642658a9e14011a4627de58878e366
2011-06-13 15:13:10 +03:00
if (next->mbmi.ref_frame == INTRA_FRAME)
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
{
for (i = 0; i < 16; i++)
pbi->mt_yleft_col[mb_row][i] = xd->dst.y_buffer [i* recon_y_stride + 15];
for (i = 0; i < 8; i++)
{
pbi->mt_uleft_col[mb_row][i] = xd->dst.u_buffer [i* recon_uv_stride + 7];
pbi->mt_vleft_col[mb_row][i] = xd->dst.v_buffer [i* recon_uv_stride + 7];
}
}
}
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* loopfilter on this macroblock. */
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if (filter_level)
{
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
if(pc->filter_type == NORMAL_LOOPFILTER)
{
loop_filter_info lfi;
FRAME_TYPE frame_type = pc->frame_type;
const int hev_index = lfi_n->hev_thr_lut[frame_type][filter_level];
lfi.mblim = lfi_n->mblim[filter_level];
lfi.blim = lfi_n->blim[filter_level];
lfi.lim = lfi_n->lim[filter_level];
lfi.hev_thr = lfi_n->hev_thr[hev_index];
if (mb_col > 0)
RTCD: add loopfilter functions This commit continues the process of converting to the new RTCD system. Change-Id: Ic8a4047d72ff3a54ec98977dd90e70c13213db71
2012-01-12 16:15:42 -08:00
vp8_loop_filter_mbv
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
(xd->dst.y_buffer, xd->dst.u_buffer, xd->dst.v_buffer, recon_y_stride, recon_uv_stride, &lfi);
if (!skip_lf)
RTCD: add loopfilter functions This commit continues the process of converting to the new RTCD system. Change-Id: Ic8a4047d72ff3a54ec98977dd90e70c13213db71
2012-01-12 16:15:42 -08:00
vp8_loop_filter_bv
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
(xd->dst.y_buffer, xd->dst.u_buffer, xd->dst.v_buffer, recon_y_stride, recon_uv_stride, &lfi);
/* don't apply across umv border */
if (mb_row > 0)
RTCD: add loopfilter functions This commit continues the process of converting to the new RTCD system. Change-Id: Ic8a4047d72ff3a54ec98977dd90e70c13213db71
2012-01-12 16:15:42 -08:00
vp8_loop_filter_mbh
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
(xd->dst.y_buffer, xd->dst.u_buffer, xd->dst.v_buffer, recon_y_stride, recon_uv_stride, &lfi);
if (!skip_lf)
RTCD: add loopfilter functions This commit continues the process of converting to the new RTCD system. Change-Id: Ic8a4047d72ff3a54ec98977dd90e70c13213db71
2012-01-12 16:15:42 -08:00
vp8_loop_filter_bh
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
(xd->dst.y_buffer, xd->dst.u_buffer, xd->dst.v_buffer, recon_y_stride, recon_uv_stride, &lfi);
}
else
{
if (mb_col > 0)
RTCD: add loopfilter functions This commit continues the process of converting to the new RTCD system. Change-Id: Ic8a4047d72ff3a54ec98977dd90e70c13213db71
2012-01-12 16:15:42 -08:00
vp8_loop_filter_simple_mbv
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
(xd->dst.y_buffer, recon_y_stride, lfi_n->mblim[filter_level]);
if (!skip_lf)
RTCD: add loopfilter functions This commit continues the process of converting to the new RTCD system. Change-Id: Ic8a4047d72ff3a54ec98977dd90e70c13213db71
2012-01-12 16:15:42 -08:00
vp8_loop_filter_simple_bv
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
(xd->dst.y_buffer, recon_y_stride, lfi_n->blim[filter_level]);
/* don't apply across umv border */
if (mb_row > 0)
RTCD: add loopfilter functions This commit continues the process of converting to the new RTCD system. Change-Id: Ic8a4047d72ff3a54ec98977dd90e70c13213db71
2012-01-12 16:15:42 -08:00
vp8_loop_filter_simple_mbh
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
(xd->dst.y_buffer, recon_y_stride, lfi_n->mblim[filter_level]);
if (!skip_lf)
RTCD: add loopfilter functions This commit continues the process of converting to the new RTCD system. Change-Id: Ic8a4047d72ff3a54ec98977dd90e70c13213db71
2012-01-12 16:15:42 -08:00
vp8_loop_filter_simple_bh
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
(xd->dst.y_buffer, recon_y_stride, lfi_n->blim[filter_level]);
}
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
}
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
New loop filter interface Separate simple filter with reduced no. of parameters. MB filter level picking based on precalculated table. Level table updated for each frame. Inside and edge limits precalculated and updated just when sharpness changes. HEV threshhold is constant. ARM targets use scalars and others vectors. Change works only with --target=generic-gnu All other targets have to be updated! Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
2011-06-10 14:10:21 +03:00
}
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
recon_yoffset += 16;
recon_uvoffset += 8;
++xd->mode_info_context; /* next mb */
Changed above and left context data layout The main reason for the change was to reduce cycles in the token decoder. (~1.5% gain for 32 bit) This layout should be more cache friendly. As a result of this change, the encoder had to be updated. Change-Id: Id5e804169d8889da0378b3a519ac04dabd28c837 Note: dixie uses a similar layout
2010-08-31 10:49:57 -04:00
xd->above_context++;
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
pbi->mt_current_mb_col[mb_row] = mb_col;
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
}
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
/* adjust to the next row of mbs */
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
if (pbi->common.filter_level)
{
if(mb_row != pc->mb_rows-1)
{
int lasty = pc->yv12_fb[ref_fb_idx].y_width + VP8BORDERINPIXELS;
int lastuv = (pc->yv12_fb[ref_fb_idx].y_width>>1) + (VP8BORDERINPIXELS>>1);
Initial WebM release
2010-05-18 11:58:33 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
for (i = 0; i < 4; i++)
{
pbi->mt_yabove_row[mb_row +1][lasty + i] = pbi->mt_yabove_row[mb_row +1][lasty -1];
pbi->mt_uabove_row[mb_row +1][lastuv + i] = pbi->mt_uabove_row[mb_row +1][lastuv -1];
pbi->mt_vabove_row[mb_row +1][lastuv + i] = pbi->mt_vabove_row[mb_row +1][lastuv -1];
}
}
}else
vp8_extend_mb_row(&pc->yv12_fb[dst_fb_idx], xd->dst.y_buffer + 16, xd->dst.u_buffer + 8, xd->dst.v_buffer + 8);
Initial WebM release
2010-05-18 11:58:33 -04:00
Restructure multi-threaded decoder On each MB, loopfiltering is done right after MB decoding. This combines two loops in multi-threaded code into one, which reduces number of synchronizations to half. The above-row/left-col data are saved in temp buffers for next-row/next MB decoding. Tests on 4-core gLucid machine showed 10% decoder performance gain with threads=4 (tulip clip). Testing on other platforms isn't done yet. Change-Id: Id18ea7c1e84965dabea65d4c01ca5bc056ddeac9
2010-09-16 14:08:52 -04:00
++xd->mode_info_context; /* skip prediction column */
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
}
Initial WebM release
2010-05-18 11:58:33 -04:00
xd->mode_info_context += xd->mode_info_stride * pbi->decoding_thread_count;
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
}
Eliminate more warnings. This eliminates a large set of warnings exposed by the Mozilla build system (Use of C++ comments in ISO C90 source, commas at the end of enum lists, a couple incomplete initializers, and signed/unsigned comparisons). It also eliminates many (but not all) of the warnings expose by newer GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite without checking the return values). There are a few spurious warnings left on my system: ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used uninitialized in this function gcc seems to be unable to figure out that the value shortcut doesn't change between the two if blocks that test it here. ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned expression >= 0 is always true ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned expression >= 0 is always true This is true, so far as it goes, but it's comparing against an enum, and the C standard does not mandate that enums be unsigned, so the checks can't be removed. Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
2010-10-27 16:04:02 -07:00
sem_wait(&pbi->h_event_end_decoding); /* add back for each frame */
First modification of multi-thread decoder This is the first modification of VP8 multi-thread decoder, which uses same threads to decode macroblocks and then do loopfiltering for each frame. Inspired by Rob Clark, synchronization was done on every 8 macroblocks instead of every macroblock to reduce lock contention. Comparing with the original code, this implementation gave about 15%- 20% performance gain while decoding my test clips on a Core2 Quad platform (Linux). The work is not done yet. Test on other platforms are needed. Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
2010-07-29 16:24:26 -04:00
}
Reference in New Issue Copy Permalink