vpx/vp9/encoder/vp9_encoder.c

4986 lines
177 KiB
C
Raw Normal View History

2010-05-18 17:58:33 +02:00
/*
* Copyright (c) 2010 The WebM project authors. All Rights Reserved.
2010-05-18 17:58:33 +02:00
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
2010-05-18 17:58:33 +02:00
*/
#include <math.h>
#include <stdio.h>
#include <limits.h>
#include "./vp9_rtcd.h"
#include "./vpx_config.h"
#include "./vpx_dsp_rtcd.h"
#include "./vpx_scale_rtcd.h"
#include "vpx_dsp/psnr.h"
#include "vpx_dsp/vpx_dsp_common.h"
#include "vpx_dsp/vpx_filter.h"
#if CONFIG_INTERNAL_STATS
#include "vpx_dsp/ssim.h"
#endif
#include "vpx_ports/mem.h"
#include "vpx_ports/system_state.h"
#include "vpx_ports/vpx_timer.h"
2010-05-18 17:58:33 +02:00
#include "vp9/common/vp9_alloccommon.h"
#include "vp9/common/vp9_filter.h"
#include "vp9/common/vp9_idct.h"
#if CONFIG_VP9_POSTPROC
#include "vp9/common/vp9_postproc.h"
#endif
#include "vp9/common/vp9_reconinter.h"
#include "vp9/common/vp9_reconintra.h"
#include "vp9/common/vp9_tile_common.h"
#include "vp9/encoder/vp9_alt_ref_aq.h"
#include "vp9/encoder/vp9_aq_360.h"
#include "vp9/encoder/vp9_aq_complexity.h"
#include "vp9/encoder/vp9_aq_cyclicrefresh.h"
#include "vp9/encoder/vp9_aq_variance.h"
#include "vp9/encoder/vp9_bitstream.h"
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
#include "vp9/encoder/vp9_context_tree.h"
#include "vp9/encoder/vp9_encodeframe.h"
#include "vp9/encoder/vp9_encodemv.h"
#include "vp9/encoder/vp9_encoder.h"
#include "vp9/encoder/vp9_extend.h"
#include "vp9/encoder/vp9_ethread.h"
#include "vp9/encoder/vp9_firstpass.h"
#include "vp9/encoder/vp9_mbgraph.h"
#include "vp9/encoder/vp9_noise_estimate.h"
#include "vp9/encoder/vp9_picklpf.h"
#include "vp9/encoder/vp9_ratectrl.h"
#include "vp9/encoder/vp9_rd.h"
#include "vp9/encoder/vp9_resize.h"
#include "vp9/encoder/vp9_segmentation.h"
#include "vp9/encoder/vp9_skin_detection.h"
#include "vp9/encoder/vp9_speed_features.h"
#include "vp9/encoder/vp9_svc_layercontext.h"
#include "vp9/encoder/vp9_temporal_filter.h"
#define AM_SEGMENT_ID_INACTIVE 7
#define AM_SEGMENT_ID_ACTIVE 0
#define ALTREF_HIGH_PRECISION_MV 1 // Whether to use high precision mv
// for altref computation.
#define HIGH_PRECISION_MV_QTHRESH 200 // Q threshold for high precision
// mv. Choose a very high value for
// now so that HIGH_PRECISION is always
// chosen.
// #define OUTPUT_YUV_REC
2010-05-18 17:58:33 +02:00
#ifdef OUTPUT_YUV_DENOISED
FILE *yuv_denoised_file = NULL;
#endif
#ifdef OUTPUT_YUV_SKINMAP
FILE *yuv_skinmap_file = NULL;
#endif
#ifdef OUTPUT_YUV_REC
FILE *yuv_rec_file;
#endif
2010-05-18 17:58:33 +02:00
#if 0
FILE *framepsnr;
FILE *kf_list;
2010-05-18 17:58:33 +02:00
FILE *keyfile;
#endif
#ifdef ENABLE_KF_DENOISE
// Test condition for spatial denoise of source.
static int is_spatial_denoise_enabled(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
const VP9EncoderConfig *const oxcf = &cpi->oxcf;
return (oxcf->pass != 1) && !is_lossless_requested(&cpi->oxcf) &&
frame_is_intra_only(cm);
}
#endif
// Test for whether to calculate metrics for the frame.
static int is_psnr_calc_enabled(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
const VP9EncoderConfig *const oxcf = &cpi->oxcf;
return cpi->b_calculate_psnr && (oxcf->pass != 1) && cm->show_frame;
}
/* clang-format off */
static const Vp9LevelSpec vp9_level_defs[VP9_LEVELS] = {
{ LEVEL_1, 829440, 36864, 200, 400, 2, 1, 4, 8 },
{ LEVEL_1_1, 2764800, 73728, 800, 1000, 2, 1, 4, 8 },
{ LEVEL_2, 4608000, 122880, 1800, 1500, 2, 1, 4, 8 },
{ LEVEL_2_1, 9216000, 245760, 3600, 2800, 2, 2, 4, 8 },
{ LEVEL_3, 20736000, 552960, 7200, 6000, 2, 4, 4, 8 },
{ LEVEL_3_1, 36864000, 983040, 12000, 10000, 2, 4, 4, 8 },
{ LEVEL_4, 83558400, 2228224, 18000, 16000, 4, 4, 4, 8 },
{ LEVEL_4_1, 160432128, 2228224, 30000, 18000, 4, 4, 5, 6 },
{ LEVEL_5, 311951360, 8912896, 60000, 36000, 6, 8, 6, 4 },
{ LEVEL_5_1, 588251136, 8912896, 120000, 46000, 8, 8, 10, 4 },
// TODO(huisu): update max_cpb_size for level 5_2 ~ 6_2 when
// they are finalized (currently TBD).
{ LEVEL_5_2, 1176502272, 8912896, 180000, 0, 8, 8, 10, 4 },
{ LEVEL_6, 1176502272, 35651584, 180000, 0, 8, 16, 10, 4 },
{ LEVEL_6_1, 2353004544u, 35651584, 240000, 0, 8, 16, 10, 4 },
{ LEVEL_6_2, 4706009088u, 35651584, 480000, 0, 8, 16, 10, 4 },
};
/* clang-format on */
static INLINE void Scale2Ratio(VPX_SCALING mode, int *hr, int *hs) {
switch (mode) {
case NORMAL:
*hr = 1;
*hs = 1;
break;
case FOURFIVE:
*hr = 4;
*hs = 5;
break;
case THREEFIVE:
*hr = 3;
*hs = 5;
break;
case ONETWO:
*hr = 1;
*hs = 2;
break;
default:
*hr = 1;
*hs = 1;
assert(0);
break;
}
}
// Mark all inactive blocks as active. Other segmentation features may be set
// so memset cannot be used, instead only inactive blocks should be reset.
static void suppress_active_map(VP9_COMP *cpi) {
unsigned char *const seg_map = cpi->segmentation_map;
if (cpi->active_map.enabled || cpi->active_map.update) {
const int rows = cpi->common.mi_rows;
const int cols = cpi->common.mi_cols;
int i;
for (i = 0; i < rows * cols; ++i)
if (seg_map[i] == AM_SEGMENT_ID_INACTIVE)
seg_map[i] = AM_SEGMENT_ID_ACTIVE;
}
}
static void apply_active_map(VP9_COMP *cpi) {
struct segmentation *const seg = &cpi->common.seg;
unsigned char *const seg_map = cpi->segmentation_map;
const unsigned char *const active_map = cpi->active_map.map;
int i;
assert(AM_SEGMENT_ID_ACTIVE == CR_SEGMENT_ID_BASE);
if (frame_is_intra_only(&cpi->common)) {
cpi->active_map.enabled = 0;
cpi->active_map.update = 1;
}
if (cpi->active_map.update) {
if (cpi->active_map.enabled) {
for (i = 0; i < cpi->common.mi_rows * cpi->common.mi_cols; ++i)
if (seg_map[i] == AM_SEGMENT_ID_ACTIVE) seg_map[i] = active_map[i];
vp9_enable_segmentation(seg);
vp9_enable_segfeature(seg, AM_SEGMENT_ID_INACTIVE, SEG_LVL_SKIP);
vp9_enable_segfeature(seg, AM_SEGMENT_ID_INACTIVE, SEG_LVL_ALT_LF);
// Setting the data to -MAX_LOOP_FILTER will result in the computed loop
// filter level being zero regardless of the value of seg->abs_delta.
vp9_set_segdata(seg, AM_SEGMENT_ID_INACTIVE, SEG_LVL_ALT_LF,
-MAX_LOOP_FILTER);
} else {
vp9_disable_segfeature(seg, AM_SEGMENT_ID_INACTIVE, SEG_LVL_SKIP);
vp9_disable_segfeature(seg, AM_SEGMENT_ID_INACTIVE, SEG_LVL_ALT_LF);
if (seg->enabled) {
seg->update_data = 1;
seg->update_map = 1;
}
}
cpi->active_map.update = 0;
}
}
static void init_level_info(Vp9LevelInfo *level_info) {
Vp9LevelStats *const level_stats = &level_info->level_stats;
Vp9LevelSpec *const level_spec = &level_info->level_spec;
memset(level_stats, 0, sizeof(*level_stats));
memset(level_spec, 0, sizeof(*level_spec));
level_spec->level = LEVEL_UNKNOWN;
level_spec->min_altref_distance = INT_MAX;
}
VP9_LEVEL vp9_get_level(const Vp9LevelSpec *const level_spec) {
int i;
const Vp9LevelSpec *this_level;
vpx_clear_system_state();
for (i = 0; i < VP9_LEVELS; ++i) {
this_level = &vp9_level_defs[i];
if ((double)level_spec->max_luma_sample_rate * (1 + SAMPLE_RATE_GRACE_P) >
(double)this_level->max_luma_sample_rate ||
level_spec->max_luma_picture_size > this_level->max_luma_picture_size ||
level_spec->average_bitrate > this_level->average_bitrate ||
level_spec->max_cpb_size > this_level->max_cpb_size ||
level_spec->compression_ratio < this_level->compression_ratio ||
level_spec->max_col_tiles > this_level->max_col_tiles ||
level_spec->min_altref_distance < this_level->min_altref_distance ||
level_spec->max_ref_frame_buffers > this_level->max_ref_frame_buffers)
continue;
break;
}
return (i == VP9_LEVELS) ? LEVEL_UNKNOWN : vp9_level_defs[i].level;
}
int vp9_set_active_map(VP9_COMP *cpi, unsigned char *new_map_16x16, int rows,
int cols) {
if (rows == cpi->common.mb_rows && cols == cpi->common.mb_cols) {
unsigned char *const active_map_8x8 = cpi->active_map.map;
const int mi_rows = cpi->common.mi_rows;
const int mi_cols = cpi->common.mi_cols;
cpi->active_map.update = 1;
if (new_map_16x16) {
int r, c;
for (r = 0; r < mi_rows; ++r) {
for (c = 0; c < mi_cols; ++c) {
active_map_8x8[r * mi_cols + c] =
new_map_16x16[(r >> 1) * cols + (c >> 1)]
? AM_SEGMENT_ID_ACTIVE
: AM_SEGMENT_ID_INACTIVE;
}
}
cpi->active_map.enabled = 1;
} else {
cpi->active_map.enabled = 0;
}
return 0;
} else {
return -1;
}
}
int vp9_get_active_map(VP9_COMP *cpi, unsigned char *new_map_16x16, int rows,
int cols) {
if (rows == cpi->common.mb_rows && cols == cpi->common.mb_cols &&
new_map_16x16) {
unsigned char *const seg_map_8x8 = cpi->segmentation_map;
const int mi_rows = cpi->common.mi_rows;
const int mi_cols = cpi->common.mi_cols;
memset(new_map_16x16, !cpi->active_map.enabled, rows * cols);
if (cpi->active_map.enabled) {
int r, c;
for (r = 0; r < mi_rows; ++r) {
for (c = 0; c < mi_cols; ++c) {
// Cyclic refresh segments are considered active despite not having
// AM_SEGMENT_ID_ACTIVE
new_map_16x16[(r >> 1) * cols + (c >> 1)] |=
seg_map_8x8[r * mi_cols + c] != AM_SEGMENT_ID_INACTIVE;
}
}
}
return 0;
} else {
return -1;
}
}
void vp9_set_high_precision_mv(VP9_COMP *cpi, int allow_high_precision_mv) {
MACROBLOCK *const mb = &cpi->td.mb;
cpi->common.allow_high_precision_mv = allow_high_precision_mv;
if (cpi->common.allow_high_precision_mv) {
mb->mvcost = mb->nmvcost_hp;
mb->mvsadcost = mb->nmvsadcost_hp;
} else {
mb->mvcost = mb->nmvcost;
mb->mvsadcost = mb->nmvsadcost;
}
}
static void setup_frame(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
// Set up entropy context depending on frame type. The decoder mandates
// the use of the default context, index 0, for keyframes and inter
// frames where the error_resilient_mode or intra_only flag is set. For
// other inter-frames the encoder currently uses only two contexts;
// context 1 for ALTREF frames and context 0 for the others.
if (frame_is_intra_only(cm) || cm->error_resilient_mode) {
vp9_setup_past_independence(cm);
} else {
if (!cpi->use_svc) cm->frame_context_idx = cpi->refresh_alt_ref_frame;
}
if (cm->frame_type == KEY_FRAME) {
if (!is_two_pass_svc(cpi)) cpi->refresh_golden_frame = 1;
cpi->refresh_alt_ref_frame = 1;
vp9_zero(cpi->interp_filter_selected);
} else {
*cm->fc = cm->frame_contexts[cm->frame_context_idx];
vp9_zero(cpi->interp_filter_selected[0]);
}
}
static void vp9_enc_setup_mi(VP9_COMMON *cm) {
int i;
cm->mi = cm->mip + cm->mi_stride + 1;
memset(cm->mip, 0, cm->mi_stride * (cm->mi_rows + 1) * sizeof(*cm->mip));
cm->prev_mi = cm->prev_mip + cm->mi_stride + 1;
// Clear top border row
memset(cm->prev_mip, 0, sizeof(*cm->prev_mip) * cm->mi_stride);
// Clear left border column
for (i = 1; i < cm->mi_rows + 1; ++i)
memset(&cm->prev_mip[i * cm->mi_stride], 0, sizeof(*cm->prev_mip));
cm->mi_grid_visible = cm->mi_grid_base + cm->mi_stride + 1;
cm->prev_mi_grid_visible = cm->prev_mi_grid_base + cm->mi_stride + 1;
memset(cm->mi_grid_base, 0,
cm->mi_stride * (cm->mi_rows + 1) * sizeof(*cm->mi_grid_base));
}
static int vp9_enc_alloc_mi(VP9_COMMON *cm, int mi_size) {
cm->mip = vpx_calloc(mi_size, sizeof(*cm->mip));
if (!cm->mip) return 1;
cm->prev_mip = vpx_calloc(mi_size, sizeof(*cm->prev_mip));
if (!cm->prev_mip) return 1;
cm->mi_alloc_size = mi_size;
cm->mi_grid_base = (MODE_INFO **)vpx_calloc(mi_size, sizeof(MODE_INFO *));
if (!cm->mi_grid_base) return 1;
cm->prev_mi_grid_base =
(MODE_INFO **)vpx_calloc(mi_size, sizeof(MODE_INFO *));
if (!cm->prev_mi_grid_base) return 1;
return 0;
}
static void vp9_enc_free_mi(VP9_COMMON *cm) {
vpx_free(cm->mip);
cm->mip = NULL;
vpx_free(cm->prev_mip);
cm->prev_mip = NULL;
vpx_free(cm->mi_grid_base);
cm->mi_grid_base = NULL;
vpx_free(cm->prev_mi_grid_base);
cm->prev_mi_grid_base = NULL;
}
static void vp9_swap_mi_and_prev_mi(VP9_COMMON *cm) {
// Current mip will be the prev_mip for the next frame.
MODE_INFO **temp_base = cm->prev_mi_grid_base;
MODE_INFO *temp = cm->prev_mip;
cm->prev_mip = cm->mip;
cm->mip = temp;
// Update the upper left visible macroblock ptrs.
cm->mi = cm->mip + cm->mi_stride + 1;
cm->prev_mi = cm->prev_mip + cm->mi_stride + 1;
cm->prev_mi_grid_base = cm->mi_grid_base;
cm->mi_grid_base = temp_base;
cm->mi_grid_visible = cm->mi_grid_base + cm->mi_stride + 1;
cm->prev_mi_grid_visible = cm->prev_mi_grid_base + cm->mi_stride + 1;
}
void vp9_initialize_enc(void) {
static volatile int init_done = 0;
if (!init_done) {
vp9_rtcd();
vpx_dsp_rtcd();
vpx_scale_rtcd();
vp9_init_intra_predictors();
vp9_init_me_luts();
vp9_rc_init_minq_luts();
vp9_entropy_mv_init();
vp9_temporal_filter_init();
init_done = 1;
}
2010-05-18 17:58:33 +02:00
}
static void dealloc_compressor_data(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
int i;
vpx_free(cpi->mbmi_ext_base);
cpi->mbmi_ext_base = NULL;
vpx_free(cpi->tile_data);
cpi->tile_data = NULL;
vpx_free(cpi->segmentation_map);
cpi->segmentation_map = NULL;
vpx_free(cpi->coding_context.last_frame_seg_map_copy);
cpi->coding_context.last_frame_seg_map_copy = NULL;
2010-05-18 17:58:33 +02:00
vpx_free(cpi->nmvcosts[0]);
vpx_free(cpi->nmvcosts[1]);
cpi->nmvcosts[0] = NULL;
cpi->nmvcosts[1] = NULL;
vpx_free(cpi->nmvcosts_hp[0]);
vpx_free(cpi->nmvcosts_hp[1]);
cpi->nmvcosts_hp[0] = NULL;
cpi->nmvcosts_hp[1] = NULL;
vpx_free(cpi->nmvsadcosts[0]);
vpx_free(cpi->nmvsadcosts[1]);
cpi->nmvsadcosts[0] = NULL;
cpi->nmvsadcosts[1] = NULL;
vpx_free(cpi->nmvsadcosts_hp[0]);
vpx_free(cpi->nmvsadcosts_hp[1]);
cpi->nmvsadcosts_hp[0] = NULL;
cpi->nmvsadcosts_hp[1] = NULL;
vp9_cyclic_refresh_free(cpi->cyclic_refresh);
cpi->cyclic_refresh = NULL;
vpx_free(cpi->active_map.map);
cpi->active_map.map = NULL;
vpx_free(cpi->consec_zero_mv);
cpi->consec_zero_mv = NULL;
vp9_free_ref_frame_buffers(cm->buffer_pool);
#if CONFIG_VP9_POSTPROC
vp9_free_postproc_buffers(cm);
#endif
vp9_free_context_buffers(cm);
2010-05-18 17:58:33 +02:00
vpx_free_frame_buffer(&cpi->last_frame_uf);
vpx_free_frame_buffer(&cpi->scaled_source);
vpx_free_frame_buffer(&cpi->scaled_last_source);
vpx_free_frame_buffer(&cpi->alt_ref_buffer);
#ifdef ENABLE_KF_DENOISE
vpx_free_frame_buffer(&cpi->raw_unscaled_source);
vpx_free_frame_buffer(&cpi->raw_scaled_source);
#endif
vp9_lookahead_destroy(cpi->lookahead);
2010-05-18 17:58:33 +02:00
vpx_free(cpi->tile_tok[0][0]);
cpi->tile_tok[0][0] = 0;
2010-05-18 17:58:33 +02:00
vp9_free_pc_tree(&cpi->td);
add a context tree structure to encoder This patch sets up a quad_tree structure (pc_tree) for holding all of pick_mode_context data we use at any square block size during encoding or picking modes. That includes contexts for 2 horizontal and 2 vertical splits, one none, and pointers to 4 sub pc_tree nodes corresponding to split. It also includes a pointer to the current chosen partitioning. This replaces code that held an index for every level in the pick modes array including: sb_index, mb_index, b_index, ab_index. These were used as stateful indexes that pointed to the current pick mode contexts you had at each level stored in the following arrays array ab4x4_context[][][], sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][], sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][], sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[], sb64_context and the partitioning that had been stored in the following: b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning. Prior to this patch before doing an encode you had to set the appropriate index for your block size ( switch statement), update it ( up to 3 lookups for the index array value) and then make your call into a recursive function at which point you'd have to call get_context which then had to do a switch statement based on the blocksize, and then up to 3 lookups based upon the block size to find the context to use. With the new code the context for the block size is passed around directly avoiding the extraneous switch statements and multi dimensional array look ups that were listed above. At any level in the search all of the contexts are local to the pc_tree you are working on (in?). In addition in most places code that used to call sub functions and then check if the block size was 4x4 and index was > 0 and return now don't preferring instead to call the right none function on the inside. Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
2014-04-17 16:30:55 +02:00
for (i = 0; i < cpi->svc.number_spatial_layers; ++i) {
LAYER_CONTEXT *const lc = &cpi->svc.layer_context[i];
vpx_free(lc->rc_twopass_stats_in.buf);
lc->rc_twopass_stats_in.buf = NULL;
lc->rc_twopass_stats_in.sz = 0;
}
if (cpi->source_diff_var != NULL) {
vpx_free(cpi->source_diff_var);
cpi->source_diff_var = NULL;
}
for (i = 0; i < MAX_LAG_BUFFERS; ++i) {
vpx_free_frame_buffer(&cpi->svc.scaled_frames[i]);
}
memset(&cpi->svc.scaled_frames[0], 0,
MAX_LAG_BUFFERS * sizeof(cpi->svc.scaled_frames[0]));
vpx_free_frame_buffer(&cpi->svc.scaled_temp);
memset(&cpi->svc.scaled_temp, 0, sizeof(cpi->svc.scaled_temp));
vpx_free_frame_buffer(&cpi->svc.empty_frame.img);
memset(&cpi->svc.empty_frame, 0, sizeof(cpi->svc.empty_frame));
vp9_free_svc_cyclic_refresh(cpi);
2010-05-18 17:58:33 +02:00
}
static void save_coding_context(VP9_COMP *cpi) {
CODING_CONTEXT *const cc = &cpi->coding_context;
VP9_COMMON *cm = &cpi->common;
// Stores a snapshot of key state variables which can subsequently be
// restored with a call to vp9_restore_coding_context. These functions are
// intended for use in a re-code loop in vp9_compress_frame where the
// quantizer value is adjusted between loop iterations.
vp9_copy(cc->nmvjointcost, cpi->td.mb.nmvjointcost);
memcpy(cc->nmvcosts[0], cpi->nmvcosts[0],
MV_VALS * sizeof(*cpi->nmvcosts[0]));
memcpy(cc->nmvcosts[1], cpi->nmvcosts[1],
MV_VALS * sizeof(*cpi->nmvcosts[1]));
memcpy(cc->nmvcosts_hp[0], cpi->nmvcosts_hp[0],
MV_VALS * sizeof(*cpi->nmvcosts_hp[0]));
memcpy(cc->nmvcosts_hp[1], cpi->nmvcosts_hp[1],
MV_VALS * sizeof(*cpi->nmvcosts_hp[1]));
vp9_copy(cc->segment_pred_probs, cm->seg.pred_probs);
memcpy(cpi->coding_context.last_frame_seg_map_copy, cm->last_frame_seg_map,
(cm->mi_rows * cm->mi_cols));
vp9_copy(cc->last_ref_lf_deltas, cm->lf.last_ref_deltas);
vp9_copy(cc->last_mode_lf_deltas, cm->lf.last_mode_deltas);
cc->fc = *cm->fc;
}
static void restore_coding_context(VP9_COMP *cpi) {
CODING_CONTEXT *const cc = &cpi->coding_context;
VP9_COMMON *cm = &cpi->common;
// Restore key state variables to the snapshot state stored in the
// previous call to vp9_save_coding_context.
vp9_copy(cpi->td.mb.nmvjointcost, cc->nmvjointcost);
memcpy(cpi->nmvcosts[0], cc->nmvcosts[0], MV_VALS * sizeof(*cc->nmvcosts[0]));
memcpy(cpi->nmvcosts[1], cc->nmvcosts[1], MV_VALS * sizeof(*cc->nmvcosts[1]));
memcpy(cpi->nmvcosts_hp[0], cc->nmvcosts_hp[0],
MV_VALS * sizeof(*cc->nmvcosts_hp[0]));
memcpy(cpi->nmvcosts_hp[1], cc->nmvcosts_hp[1],
MV_VALS * sizeof(*cc->nmvcosts_hp[1]));
vp9_copy(cm->seg.pred_probs, cc->segment_pred_probs);
memcpy(cm->last_frame_seg_map, cpi->coding_context.last_frame_seg_map_copy,
(cm->mi_rows * cm->mi_cols));
vp9_copy(cm->lf.last_ref_deltas, cc->last_ref_lf_deltas);
vp9_copy(cm->lf.last_mode_deltas, cc->last_mode_lf_deltas);
*cm->fc = cc->fc;
}
static void configure_static_seg_features(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
const RATE_CONTROL *const rc = &cpi->rc;
struct segmentation *const seg = &cm->seg;
int high_q = (int)(rc->avg_q > 48.0);
int qi_delta;
// Disable and clear down for KF
if (cm->frame_type == KEY_FRAME) {
// Clear down the global segmentation map
memset(cpi->segmentation_map, 0, cm->mi_rows * cm->mi_cols);
seg->update_map = 0;
seg->update_data = 0;
cpi->static_mb_pct = 0;
// Disable segmentation
vp9_disable_segmentation(seg);
// Clear down the segment features.
vp9_clearall_segfeatures(seg);
} else if (cpi->refresh_alt_ref_frame) {
// If this is an alt ref frame
// Clear down the global segmentation map
memset(cpi->segmentation_map, 0, cm->mi_rows * cm->mi_cols);
seg->update_map = 0;
seg->update_data = 0;
cpi->static_mb_pct = 0;
// Disable segmentation and individual segment features by default
vp9_disable_segmentation(seg);
vp9_clearall_segfeatures(seg);
// Scan frames from current to arf frame.
// This function re-enables segmentation if appropriate.
vp9_update_mbgraph_stats(cpi);
// If segmentation was enabled set those features needed for the
// arf itself.
if (seg->enabled) {
seg->update_map = 1;
seg->update_data = 1;
qi_delta =
vp9_compute_qdelta(rc, rc->avg_q, rc->avg_q * 0.875, cm->bit_depth);
vp9_set_segdata(seg, 1, SEG_LVL_ALT_Q, qi_delta - 2);
vp9_set_segdata(seg, 1, SEG_LVL_ALT_LF, -2);
vp9_enable_segfeature(seg, 1, SEG_LVL_ALT_Q);
vp9_enable_segfeature(seg, 1, SEG_LVL_ALT_LF);
2011-10-05 12:26:00 +02:00
// Where relevant assume segment data is delta data
seg->abs_delta = SEGMENT_DELTADATA;
}
} else if (seg->enabled) {
// All other frames if segmentation has been enabled
// First normal frame in a valid gf or alt ref group
if (rc->frames_since_golden == 0) {
// Set up segment features for normal frames in an arf group
if (rc->source_alt_ref_active) {
seg->update_map = 0;
seg->update_data = 1;
seg->abs_delta = SEGMENT_DELTADATA;
qi_delta =
vp9_compute_qdelta(rc, rc->avg_q, rc->avg_q * 1.125, cm->bit_depth);
vp9_set_segdata(seg, 1, SEG_LVL_ALT_Q, qi_delta + 2);
vp9_enable_segfeature(seg, 1, SEG_LVL_ALT_Q);
vp9_set_segdata(seg, 1, SEG_LVL_ALT_LF, -2);
vp9_enable_segfeature(seg, 1, SEG_LVL_ALT_LF);
// Segment coding disabled for compred testing
if (high_q || (cpi->static_mb_pct == 100)) {
vp9_set_segdata(seg, 1, SEG_LVL_REF_FRAME, ALTREF_FRAME);
vp9_enable_segfeature(seg, 1, SEG_LVL_REF_FRAME);
vp9_enable_segfeature(seg, 1, SEG_LVL_SKIP);
}
} else {
// Disable segmentation and clear down features if alt ref
// is not active for this group
vp9_disable_segmentation(seg);
memset(cpi->segmentation_map, 0, cm->mi_rows * cm->mi_cols);
seg->update_map = 0;
seg->update_data = 0;
vp9_clearall_segfeatures(seg);
}
} else if (rc->is_src_frame_alt_ref) {
// Special case where we are coding over the top of a previous
// alt ref frame.
// Segment coding disabled for compred testing
// Enable ref frame features for segment 0 as well
vp9_enable_segfeature(seg, 0, SEG_LVL_REF_FRAME);
vp9_enable_segfeature(seg, 1, SEG_LVL_REF_FRAME);
// All mbs should use ALTREF_FRAME
vp9_clear_segdata(seg, 0, SEG_LVL_REF_FRAME);
vp9_set_segdata(seg, 0, SEG_LVL_REF_FRAME, ALTREF_FRAME);
vp9_clear_segdata(seg, 1, SEG_LVL_REF_FRAME);
vp9_set_segdata(seg, 1, SEG_LVL_REF_FRAME, ALTREF_FRAME);
// Skip all MBs if high Q (0,0 mv and skip coeffs)
if (high_q) {
vp9_enable_segfeature(seg, 0, SEG_LVL_SKIP);
vp9_enable_segfeature(seg, 1, SEG_LVL_SKIP);
}
// Enable data update
seg->update_data = 1;
} else {
// All other frames.
// No updates.. leave things as they are.
seg->update_map = 0;
seg->update_data = 0;
}
}
}
static void update_reference_segmentation_map(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
MODE_INFO **mi_8x8_ptr = cm->mi_grid_visible;
uint8_t *cache_ptr = cm->last_frame_seg_map;
int row, col;
for (row = 0; row < cm->mi_rows; row++) {
MODE_INFO **mi_8x8 = mi_8x8_ptr;
uint8_t *cache = cache_ptr;
for (col = 0; col < cm->mi_cols; col++, mi_8x8++, cache++)
cache[0] = mi_8x8[0]->segment_id;
mi_8x8_ptr += cm->mi_stride;
cache_ptr += cm->mi_cols;
}
}
static void alloc_raw_frame_buffers(VP9_COMP *cpi) {
VP9_COMMON *cm = &cpi->common;
const VP9EncoderConfig *oxcf = &cpi->oxcf;
if (!cpi->lookahead)
cpi->lookahead = vp9_lookahead_init(oxcf->width, oxcf->height,
cm->subsampling_x, cm->subsampling_y,
#if CONFIG_VP9_HIGHBITDEPTH
cm->use_highbitdepth,
#endif
oxcf->lag_in_frames);
if (!cpi->lookahead)
vpx_internal_error(&cm->error, VPX_CODEC_MEM_ERROR,
"Failed to allocate lag buffers");
2010-05-18 17:58:33 +02:00
// TODO(agrange) Check if ARF is enabled and skip allocation if not.
if (vpx_realloc_frame_buffer(&cpi->alt_ref_buffer, oxcf->width, oxcf->height,
cm->subsampling_x, cm->subsampling_y,
#if CONFIG_VP9_HIGHBITDEPTH
cm->use_highbitdepth,
#endif
VP9_ENC_BORDER_IN_PIXELS, cm->byte_alignment,
NULL, NULL, NULL))
vpx_internal_error(&cm->error, VPX_CODEC_MEM_ERROR,
"Failed to allocate altref buffer");
2010-05-18 17:58:33 +02:00
}
static void alloc_util_frame_buffers(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
if (vpx_realloc_frame_buffer(&cpi->last_frame_uf, cm->width, cm->height,
cm->subsampling_x, cm->subsampling_y,
#if CONFIG_VP9_HIGHBITDEPTH
cm->use_highbitdepth,
#endif
VP9_ENC_BORDER_IN_PIXELS, cm->byte_alignment,
NULL, NULL, NULL))
vpx_internal_error(&cm->error, VPX_CODEC_MEM_ERROR,
"Failed to allocate last frame buffer");
if (vpx_realloc_frame_buffer(&cpi->scaled_source, cm->width, cm->height,
cm->subsampling_x, cm->subsampling_y,
#if CONFIG_VP9_HIGHBITDEPTH
cm->use_highbitdepth,
#endif
VP9_ENC_BORDER_IN_PIXELS, cm->byte_alignment,
NULL, NULL, NULL))
vpx_internal_error(&cm->error, VPX_CODEC_MEM_ERROR,
"Failed to allocate scaled source buffer");
// For 1 pass cbr: allocate scaled_frame that may be used as an intermediate
// buffer for a 2 stage down-sampling: two stages of 1:2 down-sampling for a
// target of 1/4x1/4.
if (is_one_pass_cbr_svc(cpi) && !cpi->svc.scaled_temp_is_alloc) {
cpi->svc.scaled_temp_is_alloc = 1;
if (vpx_realloc_frame_buffer(
&cpi->svc.scaled_temp, cm->width >> 1, cm->height >> 1,
cm->subsampling_x, cm->subsampling_y,
#if CONFIG_VP9_HIGHBITDEPTH
cm->use_highbitdepth,
#endif
VP9_ENC_BORDER_IN_PIXELS, cm->byte_alignment, NULL, NULL, NULL))
vpx_internal_error(&cpi->common.error, VPX_CODEC_MEM_ERROR,
"Failed to allocate scaled_frame for svc ");
}
if (vpx_realloc_frame_buffer(&cpi->scaled_last_source, cm->width, cm->height,
cm->subsampling_x, cm->subsampling_y,
#if CONFIG_VP9_HIGHBITDEPTH
cm->use_highbitdepth,
#endif
VP9_ENC_BORDER_IN_PIXELS, cm->byte_alignment,
NULL, NULL, NULL))
vpx_internal_error(&cm->error, VPX_CODEC_MEM_ERROR,
"Failed to allocate scaled last source buffer");
#ifdef ENABLE_KF_DENOISE
if (vpx_realloc_frame_buffer(&cpi->raw_unscaled_source, cm->width, cm->height,
cm->subsampling_x, cm->subsampling_y,
#if CONFIG_VP9_HIGHBITDEPTH
cm->use_highbitdepth,
#endif
VP9_ENC_BORDER_IN_PIXELS, cm->byte_alignment,
NULL, NULL, NULL))
vpx_internal_error(&cm->error, VPX_CODEC_MEM_ERROR,
"Failed to allocate unscaled raw source frame buffer");
if (vpx_realloc_frame_buffer(&cpi->raw_scaled_source, cm->width, cm->height,
cm->subsampling_x, cm->subsampling_y,
#if CONFIG_VP9_HIGHBITDEPTH
cm->use_highbitdepth,
#endif
VP9_ENC_BORDER_IN_PIXELS, cm->byte_alignment,
NULL, NULL, NULL))
vpx_internal_error(&cm->error, VPX_CODEC_MEM_ERROR,
"Failed to allocate scaled raw source frame buffer");
#endif
}
static int alloc_context_buffers_ext(VP9_COMP *cpi) {
VP9_COMMON *cm = &cpi->common;
int mi_size = cm->mi_cols * cm->mi_rows;
cpi->mbmi_ext_base = vpx_calloc(mi_size, sizeof(*cpi->mbmi_ext_base));
if (!cpi->mbmi_ext_base) return 1;
return 0;
}
static void alloc_compressor_data(VP9_COMP *cpi) {
VP9_COMMON *cm = &cpi->common;
vp9_alloc_context_buffers(cm, cm->width, cm->height);
alloc_context_buffers_ext(cpi);
vpx_free(cpi->tile_tok[0][0]);
{
unsigned int tokens = get_token_alloc(cm->mb_rows, cm->mb_cols);
CHECK_MEM_ERROR(cm, cpi->tile_tok[0][0],
vpx_calloc(tokens, sizeof(*cpi->tile_tok[0][0])));
}
vp9_setup_pc_tree(&cpi->common, &cpi->td);
}
void vp9_new_framerate(VP9_COMP *cpi, double framerate) {
cpi->framerate = framerate < 0.1 ? 30 : framerate;
vp9_rc_update_framerate(cpi);
}
static void set_tile_limits(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
int min_log2_tile_cols, max_log2_tile_cols;
vp9_get_tile_n_bits(cm->mi_cols, &min_log2_tile_cols, &max_log2_tile_cols);
if (is_two_pass_svc(cpi) && (cpi->svc.encode_empty_frame_state == ENCODING ||
cpi->svc.number_spatial_layers > 1)) {
cm->log2_tile_cols = 0;
cm->log2_tile_rows = 0;
} else {
cm->log2_tile_cols =
clamp(cpi->oxcf.tile_columns, min_log2_tile_cols, max_log2_tile_cols);
cm->log2_tile_rows = cpi->oxcf.tile_rows;
}
}
static void update_frame_size(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
MACROBLOCKD *const xd = &cpi->td.mb.e_mbd;
vp9_set_mb_mi(cm, cm->width, cm->height);
vp9_init_context_buffers(cm);
vp9_init_macroblockd(cm, xd, NULL);
cpi->td.mb.mbmi_ext_base = cpi->mbmi_ext_base;
memset(cpi->mbmi_ext_base, 0,
cm->mi_rows * cm->mi_cols * sizeof(*cpi->mbmi_ext_base));
set_tile_limits(cpi);
if (is_two_pass_svc(cpi)) {
if (vpx_realloc_frame_buffer(&cpi->alt_ref_buffer, cm->width, cm->height,
cm->subsampling_x, cm->subsampling_y,
#if CONFIG_VP9_HIGHBITDEPTH
cm->use_highbitdepth,
#endif
VP9_ENC_BORDER_IN_PIXELS, cm->byte_alignment,
NULL, NULL, NULL))
vpx_internal_error(&cm->error, VPX_CODEC_MEM_ERROR,
"Failed to reallocate alt_ref_buffer");
}
}
static void init_buffer_indices(VP9_COMP *cpi) {
cpi->lst_fb_idx = 0;
cpi->gld_fb_idx = 1;
cpi->alt_fb_idx = 2;
}
static void init_config(struct VP9_COMP *cpi, VP9EncoderConfig *oxcf) {
[WIP] Add column-based tiling. This patch adds column-based tiling. The idea is to make each tile independently decodable (after reading the common frame header) and also independendly encodable (minus within-frame cost adjustments in the RD loop) to speed-up hardware & software en/decoders if they used multi-threading. Column-based tiling has the added advantage (over other tiling methods) that it minimizes realtime use-case latency, since all threads can start encoding data as soon as the first SB-row worth of data is available to the encoder. There is some test code that does random tile ordering in the decoder, to confirm that each tile is indeed independently decodable from other tiles in the same frame. At tile edges, all contexts assume default values (i.e. 0, 0 motion vector, no coefficients, DC intra4x4 mode), and motion vector search and ordering do not cross tiles in the same frame. t log Tile independence is not maintained between frames ATM, i.e. tile 0 of frame 1 is free to use motion vectors that point into any tile of frame 0. We support 1 (i.e. no tiling), 2 or 4 column-tiles. The loopfilter crosses tile boundaries. I discussed this briefly with Aki and he says that's OK. An in-loop loopfilter would need to do some sync between tile threads, but that shouldn't be a big issue. Resuls: with tiling disabled, we go up slightly because of improved edge use in the intra4x4 prediction. With 2 tiles, we lose about ~1% on derf, ~0.35% on HD and ~0.55% on STD/HD. With 4 tiles, we lose another ~1.5% on derf ~0.77% on HD and ~0.85% on STD/HD. Most of this loss is concentrated in the low-bitrate end of clips, and most of it is because of the loss of edges at tile boundaries and the resulting loss of intra predictors. TODO: - more tiles (perhaps allow row-based tiling also, and max. 8 tiles)? - maybe optionally (for EC purposes), motion vectors themselves should not cross tile edges, or we should emulate such borders as if they were off-frame, to limit error propagation to within one tile only. This doesn't have to be the default behaviour but could be an optional bitstream flag. Change-Id: I5951c3a0742a767b20bc9fb5af685d9892c2c96f
2013-02-01 18:35:28 +01:00
VP9_COMMON *const cm = &cpi->common;
2010-05-18 17:58:33 +02:00
cpi->oxcf = *oxcf;
cpi->framerate = oxcf->init_framerate;
cm->profile = oxcf->profile;
cm->bit_depth = oxcf->bit_depth;
#if CONFIG_VP9_HIGHBITDEPTH
cm->use_highbitdepth = oxcf->use_highbitdepth;
#endif
cm->color_space = oxcf->color_space;
cm->color_range = oxcf->color_range;
2010-05-18 17:58:33 +02:00
cpi->target_level = oxcf->target_level;
cpi->keep_level_stats = oxcf->target_level != LEVEL_MAX;
cm->width = oxcf->width;
cm->height = oxcf->height;
alloc_compressor_data(cpi);
cpi->svc.temporal_layering_mode = oxcf->temporal_layering_mode;
// Single thread case: use counts in common.
cpi->td.counts = &cm->counts;
// Spatial scalability.
cpi->svc.number_spatial_layers = oxcf->ss_number_layers;
// Temporal scalability.
cpi->svc.number_temporal_layers = oxcf->ts_number_layers;
if ((cpi->svc.number_temporal_layers > 1 && cpi->oxcf.rc_mode == VPX_CBR) ||
((cpi->svc.number_temporal_layers > 1 ||
cpi->svc.number_spatial_layers > 1) &&
cpi->oxcf.pass != 1)) {
vp9_init_layer_context(cpi);
}
// change includes all joint functionality
vp9_change_config(cpi, oxcf);
2010-05-18 17:58:33 +02:00
cpi->static_mb_pct = 0;
cpi->ref_frame_flags = 0;
init_buffer_indices(cpi);
vp9_noise_estimate_init(&cpi->noise_estimate, cm->width, cm->height);
2010-05-18 17:58:33 +02:00
}
static void set_rc_buffer_sizes(RATE_CONTROL *rc,
const VP9EncoderConfig *oxcf) {
const int64_t bandwidth = oxcf->target_bandwidth;
const int64_t starting = oxcf->starting_buffer_level_ms;
const int64_t optimal = oxcf->optimal_buffer_level_ms;
const int64_t maximum = oxcf->maximum_buffer_size_ms;
rc->starting_buffer_level = starting * bandwidth / 1000;
rc->optimal_buffer_level =
(optimal == 0) ? bandwidth / 8 : optimal * bandwidth / 1000;
rc->maximum_buffer_size =
(maximum == 0) ? bandwidth / 8 : maximum * bandwidth / 1000;
}
#if CONFIG_VP9_HIGHBITDEPTH
#define HIGHBD_BFP(BT, SDF, SDAF, VF, SVF, SVAF, SDX3F, SDX8F, SDX4DF) \
cpi->fn_ptr[BT].sdf = SDF; \
cpi->fn_ptr[BT].sdaf = SDAF; \
cpi->fn_ptr[BT].vf = VF; \
cpi->fn_ptr[BT].svf = SVF; \
cpi->fn_ptr[BT].svaf = SVAF; \
cpi->fn_ptr[BT].sdx3f = SDX3F; \
cpi->fn_ptr[BT].sdx8f = SDX8F; \
cpi->fn_ptr[BT].sdx4df = SDX4DF;
#define MAKE_BFP_SAD_WRAPPER(fnname) \
static unsigned int fnname##_bits8(const uint8_t *src_ptr, \
int source_stride, \
const uint8_t *ref_ptr, int ref_stride) { \
return fnname(src_ptr, source_stride, ref_ptr, ref_stride); \
} \
static unsigned int fnname##_bits10( \
const uint8_t *src_ptr, int source_stride, const uint8_t *ref_ptr, \
int ref_stride) { \
return fnname(src_ptr, source_stride, ref_ptr, ref_stride) >> 2; \
} \
static unsigned int fnname##_bits12( \
const uint8_t *src_ptr, int source_stride, const uint8_t *ref_ptr, \
int ref_stride) { \
return fnname(src_ptr, source_stride, ref_ptr, ref_stride) >> 4; \
}
#define MAKE_BFP_SADAVG_WRAPPER(fnname) \
static unsigned int fnname##_bits8( \
const uint8_t *src_ptr, int source_stride, const uint8_t *ref_ptr, \
int ref_stride, const uint8_t *second_pred) { \
return fnname(src_ptr, source_stride, ref_ptr, ref_stride, second_pred); \
} \
static unsigned int fnname##_bits10( \
const uint8_t *src_ptr, int source_stride, const uint8_t *ref_ptr, \
int ref_stride, const uint8_t *second_pred) { \
return fnname(src_ptr, source_stride, ref_ptr, ref_stride, second_pred) >> \
2; \
} \
static unsigned int fnname##_bits12( \
const uint8_t *src_ptr, int source_stride, const uint8_t *ref_ptr, \
int ref_stride, const uint8_t *second_pred) { \
return fnname(src_ptr, source_stride, ref_ptr, ref_stride, second_pred) >> \
4; \
}
#define MAKE_BFP_SAD3_WRAPPER(fnname) \
static void fnname##_bits8(const uint8_t *src_ptr, int source_stride, \
const uint8_t *ref_ptr, int ref_stride, \
unsigned int *sad_array) { \
fnname(src_ptr, source_stride, ref_ptr, ref_stride, sad_array); \
} \
static void fnname##_bits10(const uint8_t *src_ptr, int source_stride, \
const uint8_t *ref_ptr, int ref_stride, \
unsigned int *sad_array) { \
int i; \
fnname(src_ptr, source_stride, ref_ptr, ref_stride, sad_array); \
for (i = 0; i < 3; i++) sad_array[i] >>= 2; \
} \
static void fnname##_bits12(const uint8_t *src_ptr, int source_stride, \
const uint8_t *ref_ptr, int ref_stride, \
unsigned int *sad_array) { \
int i; \
fnname(src_ptr, source_stride, ref_ptr, ref_stride, sad_array); \
for (i = 0; i < 3; i++) sad_array[i] >>= 4; \
}
#define MAKE_BFP_SAD8_WRAPPER(fnname) \
static void fnname##_bits8(const uint8_t *src_ptr, int source_stride, \
const uint8_t *ref_ptr, int ref_stride, \
unsigned int *sad_array) { \
fnname(src_ptr, source_stride, ref_ptr, ref_stride, sad_array); \
} \
static void fnname##_bits10(const uint8_t *src_ptr, int source_stride, \
const uint8_t *ref_ptr, int ref_stride, \
unsigned int *sad_array) { \
int i; \
fnname(src_ptr, source_stride, ref_ptr, ref_stride, sad_array); \
for (i = 0; i < 8; i++) sad_array[i] >>= 2; \
} \
static void fnname##_bits12(const uint8_t *src_ptr, int source_stride, \
const uint8_t *ref_ptr, int ref_stride, \
unsigned int *sad_array) { \
int i; \
fnname(src_ptr, source_stride, ref_ptr, ref_stride, sad_array); \
for (i = 0; i < 8; i++) sad_array[i] >>= 4; \
}
#define MAKE_BFP_SAD4D_WRAPPER(fnname) \
static void fnname##_bits8(const uint8_t *src_ptr, int source_stride, \
const uint8_t *const ref_ptr[], int ref_stride, \
unsigned int *sad_array) { \
fnname(src_ptr, source_stride, ref_ptr, ref_stride, sad_array); \
} \
static void fnname##_bits10(const uint8_t *src_ptr, int source_stride, \
const uint8_t *const ref_ptr[], int ref_stride, \
unsigned int *sad_array) { \
int i; \
fnname(src_ptr, source_stride, ref_ptr, ref_stride, sad_array); \
for (i = 0; i < 4; i++) sad_array[i] >>= 2; \
} \
static void fnname##_bits12(const uint8_t *src_ptr, int source_stride, \
const uint8_t *const ref_ptr[], int ref_stride, \
unsigned int *sad_array) { \
int i; \
fnname(src_ptr, source_stride, ref_ptr, ref_stride, sad_array); \
for (i = 0; i < 4; i++) sad_array[i] >>= 4; \
}
MAKE_BFP_SAD_WRAPPER(vpx_highbd_sad32x16)
MAKE_BFP_SADAVG_WRAPPER(vpx_highbd_sad32x16_avg)
MAKE_BFP_SAD4D_WRAPPER(vpx_highbd_sad32x16x4d)
MAKE_BFP_SAD_WRAPPER(vpx_highbd_sad16x32)
MAKE_BFP_SADAVG_WRAPPER(vpx_highbd_sad16x32_avg)
MAKE_BFP_SAD4D_WRAPPER(vpx_highbd_sad16x32x4d)
MAKE_BFP_SAD_WRAPPER(vpx_highbd_sad64x32)
MAKE_BFP_SADAVG_WRAPPER(vpx_highbd_sad64x32_avg)
MAKE_BFP_SAD4D_WRAPPER(vpx_highbd_sad64x32x4d)
MAKE_BFP_SAD_WRAPPER(vpx_highbd_sad32x64)
MAKE_BFP_SADAVG_WRAPPER(vpx_highbd_sad32x64_avg)
MAKE_BFP_SAD4D_WRAPPER(vpx_highbd_sad32x64x4d)
MAKE_BFP_SAD_WRAPPER(vpx_highbd_sad32x32)
MAKE_BFP_SADAVG_WRAPPER(vpx_highbd_sad32x32_avg)
MAKE_BFP_SAD3_WRAPPER(vpx_highbd_sad32x32x3)
MAKE_BFP_SAD8_WRAPPER(vpx_highbd_sad32x32x8)
MAKE_BFP_SAD4D_WRAPPER(vpx_highbd_sad32x32x4d)
MAKE_BFP_SAD_WRAPPER(vpx_highbd_sad64x64)
MAKE_BFP_SADAVG_WRAPPER(vpx_highbd_sad64x64_avg)
MAKE_BFP_SAD3_WRAPPER(vpx_highbd_sad64x64x3)
MAKE_BFP_SAD8_WRAPPER(vpx_highbd_sad64x64x8)
MAKE_BFP_SAD4D_WRAPPER(vpx_highbd_sad64x64x4d)
MAKE_BFP_SAD_WRAPPER(vpx_highbd_sad16x16)
MAKE_BFP_SADAVG_WRAPPER(vpx_highbd_sad16x16_avg)
MAKE_BFP_SAD3_WRAPPER(vpx_highbd_sad16x16x3)
MAKE_BFP_SAD8_WRAPPER(vpx_highbd_sad16x16x8)
MAKE_BFP_SAD4D_WRAPPER(vpx_highbd_sad16x16x4d)
MAKE_BFP_SAD_WRAPPER(vpx_highbd_sad16x8)
MAKE_BFP_SADAVG_WRAPPER(vpx_highbd_sad16x8_avg)
MAKE_BFP_SAD3_WRAPPER(vpx_highbd_sad16x8x3)
MAKE_BFP_SAD8_WRAPPER(vpx_highbd_sad16x8x8)
MAKE_BFP_SAD4D_WRAPPER(vpx_highbd_sad16x8x4d)
MAKE_BFP_SAD_WRAPPER(vpx_highbd_sad8x16)
MAKE_BFP_SADAVG_WRAPPER(vpx_highbd_sad8x16_avg)
MAKE_BFP_SAD3_WRAPPER(vpx_highbd_sad8x16x3)
MAKE_BFP_SAD8_WRAPPER(vpx_highbd_sad8x16x8)
MAKE_BFP_SAD4D_WRAPPER(vpx_highbd_sad8x16x4d)
MAKE_BFP_SAD_WRAPPER(vpx_highbd_sad8x8)
MAKE_BFP_SADAVG_WRAPPER(vpx_highbd_sad8x8_avg)
MAKE_BFP_SAD3_WRAPPER(vpx_highbd_sad8x8x3)
MAKE_BFP_SAD8_WRAPPER(vpx_highbd_sad8x8x8)
MAKE_BFP_SAD4D_WRAPPER(vpx_highbd_sad8x8x4d)
MAKE_BFP_SAD_WRAPPER(vpx_highbd_sad8x4)
MAKE_BFP_SADAVG_WRAPPER(vpx_highbd_sad8x4_avg)
MAKE_BFP_SAD8_WRAPPER(vpx_highbd_sad8x4x8)
MAKE_BFP_SAD4D_WRAPPER(vpx_highbd_sad8x4x4d)
MAKE_BFP_SAD_WRAPPER(vpx_highbd_sad4x8)
MAKE_BFP_SADAVG_WRAPPER(vpx_highbd_sad4x8_avg)
MAKE_BFP_SAD8_WRAPPER(vpx_highbd_sad4x8x8)
MAKE_BFP_SAD4D_WRAPPER(vpx_highbd_sad4x8x4d)
MAKE_BFP_SAD_WRAPPER(vpx_highbd_sad4x4)
MAKE_BFP_SADAVG_WRAPPER(vpx_highbd_sad4x4_avg)
MAKE_BFP_SAD3_WRAPPER(vpx_highbd_sad4x4x3)
MAKE_BFP_SAD8_WRAPPER(vpx_highbd_sad4x4x8)
MAKE_BFP_SAD4D_WRAPPER(vpx_highbd_sad4x4x4d)
static void highbd_set_var_fns(VP9_COMP *const cpi) {
VP9_COMMON *const cm = &cpi->common;
if (cm->use_highbitdepth) {
switch (cm->bit_depth) {
case VPX_BITS_8:
HIGHBD_BFP(BLOCK_32X16, vpx_highbd_sad32x16_bits8,
vpx_highbd_sad32x16_avg_bits8, vpx_highbd_8_variance32x16,
vpx_highbd_8_sub_pixel_variance32x16,
vpx_highbd_8_sub_pixel_avg_variance32x16, NULL, NULL,
vpx_highbd_sad32x16x4d_bits8)
HIGHBD_BFP(BLOCK_16X32, vpx_highbd_sad16x32_bits8,
vpx_highbd_sad16x32_avg_bits8, vpx_highbd_8_variance16x32,
vpx_highbd_8_sub_pixel_variance16x32,
vpx_highbd_8_sub_pixel_avg_variance16x32, NULL, NULL,
vpx_highbd_sad16x32x4d_bits8)
HIGHBD_BFP(BLOCK_64X32, vpx_highbd_sad64x32_bits8,
vpx_highbd_sad64x32_avg_bits8, vpx_highbd_8_variance64x32,
vpx_highbd_8_sub_pixel_variance64x32,
vpx_highbd_8_sub_pixel_avg_variance64x32, NULL, NULL,
vpx_highbd_sad64x32x4d_bits8)
HIGHBD_BFP(BLOCK_32X64, vpx_highbd_sad32x64_bits8,
vpx_highbd_sad32x64_avg_bits8, vpx_highbd_8_variance32x64,
vpx_highbd_8_sub_pixel_variance32x64,
vpx_highbd_8_sub_pixel_avg_variance32x64, NULL, NULL,
vpx_highbd_sad32x64x4d_bits8)
HIGHBD_BFP(BLOCK_32X32, vpx_highbd_sad32x32_bits8,
vpx_highbd_sad32x32_avg_bits8, vpx_highbd_8_variance32x32,
vpx_highbd_8_sub_pixel_variance32x32,
vpx_highbd_8_sub_pixel_avg_variance32x32,
vpx_highbd_sad32x32x3_bits8, vpx_highbd_sad32x32x8_bits8,
vpx_highbd_sad32x32x4d_bits8)
HIGHBD_BFP(BLOCK_64X64, vpx_highbd_sad64x64_bits8,
vpx_highbd_sad64x64_avg_bits8, vpx_highbd_8_variance64x64,
vpx_highbd_8_sub_pixel_variance64x64,
vpx_highbd_8_sub_pixel_avg_variance64x64,
vpx_highbd_sad64x64x3_bits8, vpx_highbd_sad64x64x8_bits8,
vpx_highbd_sad64x64x4d_bits8)
HIGHBD_BFP(BLOCK_16X16, vpx_highbd_sad16x16_bits8,
vpx_highbd_sad16x16_avg_bits8, vpx_highbd_8_variance16x16,
vpx_highbd_8_sub_pixel_variance16x16,
vpx_highbd_8_sub_pixel_avg_variance16x16,
vpx_highbd_sad16x16x3_bits8, vpx_highbd_sad16x16x8_bits8,
vpx_highbd_sad16x16x4d_bits8)
HIGHBD_BFP(
BLOCK_16X8, vpx_highbd_sad16x8_bits8, vpx_highbd_sad16x8_avg_bits8,
vpx_highbd_8_variance16x8, vpx_highbd_8_sub_pixel_variance16x8,
vpx_highbd_8_sub_pixel_avg_variance16x8, vpx_highbd_sad16x8x3_bits8,
vpx_highbd_sad16x8x8_bits8, vpx_highbd_sad16x8x4d_bits8)
HIGHBD_BFP(
BLOCK_8X16, vpx_highbd_sad8x16_bits8, vpx_highbd_sad8x16_avg_bits8,
vpx_highbd_8_variance8x16, vpx_highbd_8_sub_pixel_variance8x16,
vpx_highbd_8_sub_pixel_avg_variance8x16, vpx_highbd_sad8x16x3_bits8,
vpx_highbd_sad8x16x8_bits8, vpx_highbd_sad8x16x4d_bits8)
HIGHBD_BFP(
BLOCK_8X8, vpx_highbd_sad8x8_bits8, vpx_highbd_sad8x8_avg_bits8,
vpx_highbd_8_variance8x8, vpx_highbd_8_sub_pixel_variance8x8,
vpx_highbd_8_sub_pixel_avg_variance8x8, vpx_highbd_sad8x8x3_bits8,
vpx_highbd_sad8x8x8_bits8, vpx_highbd_sad8x8x4d_bits8)
HIGHBD_BFP(BLOCK_8X4, vpx_highbd_sad8x4_bits8,
vpx_highbd_sad8x4_avg_bits8, vpx_highbd_8_variance8x4,
vpx_highbd_8_sub_pixel_variance8x4,
vpx_highbd_8_sub_pixel_avg_variance8x4, NULL,
vpx_highbd_sad8x4x8_bits8, vpx_highbd_sad8x4x4d_bits8)
HIGHBD_BFP(BLOCK_4X8, vpx_highbd_sad4x8_bits8,
vpx_highbd_sad4x8_avg_bits8, vpx_highbd_8_variance4x8,
vpx_highbd_8_sub_pixel_variance4x8,
vpx_highbd_8_sub_pixel_avg_variance4x8, NULL,
vpx_highbd_sad4x8x8_bits8, vpx_highbd_sad4x8x4d_bits8)
HIGHBD_BFP(
BLOCK_4X4, vpx_highbd_sad4x4_bits8, vpx_highbd_sad4x4_avg_bits8,
vpx_highbd_8_variance4x4, vpx_highbd_8_sub_pixel_variance4x4,
vpx_highbd_8_sub_pixel_avg_variance4x4, vpx_highbd_sad4x4x3_bits8,
vpx_highbd_sad4x4x8_bits8, vpx_highbd_sad4x4x4d_bits8)
break;
case VPX_BITS_10:
HIGHBD_BFP(BLOCK_32X16, vpx_highbd_sad32x16_bits10,
vpx_highbd_sad32x16_avg_bits10, vpx_highbd_10_variance32x16,
vpx_highbd_10_sub_pixel_variance32x16,
vpx_highbd_10_sub_pixel_avg_variance32x16, NULL, NULL,
vpx_highbd_sad32x16x4d_bits10)
HIGHBD_BFP(BLOCK_16X32, vpx_highbd_sad16x32_bits10,
vpx_highbd_sad16x32_avg_bits10, vpx_highbd_10_variance16x32,
vpx_highbd_10_sub_pixel_variance16x32,
vpx_highbd_10_sub_pixel_avg_variance16x32, NULL, NULL,
vpx_highbd_sad16x32x4d_bits10)
HIGHBD_BFP(BLOCK_64X32, vpx_highbd_sad64x32_bits10,
vpx_highbd_sad64x32_avg_bits10, vpx_highbd_10_variance64x32,
vpx_highbd_10_sub_pixel_variance64x32,
vpx_highbd_10_sub_pixel_avg_variance64x32, NULL, NULL,
vpx_highbd_sad64x32x4d_bits10)
HIGHBD_BFP(BLOCK_32X64, vpx_highbd_sad32x64_bits10,
vpx_highbd_sad32x64_avg_bits10, vpx_highbd_10_variance32x64,
vpx_highbd_10_sub_pixel_variance32x64,
vpx_highbd_10_sub_pixel_avg_variance32x64, NULL, NULL,
vpx_highbd_sad32x64x4d_bits10)
HIGHBD_BFP(BLOCK_32X32, vpx_highbd_sad32x32_bits10,
vpx_highbd_sad32x32_avg_bits10, vpx_highbd_10_variance32x32,
vpx_highbd_10_sub_pixel_variance32x32,
vpx_highbd_10_sub_pixel_avg_variance32x32,
vpx_highbd_sad32x32x3_bits10, vpx_highbd_sad32x32x8_bits10,
vpx_highbd_sad32x32x4d_bits10)
HIGHBD_BFP(BLOCK_64X64, vpx_highbd_sad64x64_bits10,
vpx_highbd_sad64x64_avg_bits10, vpx_highbd_10_variance64x64,
vpx_highbd_10_sub_pixel_variance64x64,
vpx_highbd_10_sub_pixel_avg_variance64x64,
vpx_highbd_sad64x64x3_bits10, vpx_highbd_sad64x64x8_bits10,
vpx_highbd_sad64x64x4d_bits10)
HIGHBD_BFP(BLOCK_16X16, vpx_highbd_sad16x16_bits10,
vpx_highbd_sad16x16_avg_bits10, vpx_highbd_10_variance16x16,
vpx_highbd_10_sub_pixel_variance16x16,
vpx_highbd_10_sub_pixel_avg_variance16x16,
vpx_highbd_sad16x16x3_bits10, vpx_highbd_sad16x16x8_bits10,
vpx_highbd_sad16x16x4d_bits10)
HIGHBD_BFP(BLOCK_16X8, vpx_highbd_sad16x8_bits10,
vpx_highbd_sad16x8_avg_bits10, vpx_highbd_10_variance16x8,
vpx_highbd_10_sub_pixel_variance16x8,
vpx_highbd_10_sub_pixel_avg_variance16x8,
vpx_highbd_sad16x8x3_bits10, vpx_highbd_sad16x8x8_bits10,
vpx_highbd_sad16x8x4d_bits10)
HIGHBD_BFP(BLOCK_8X16, vpx_highbd_sad8x16_bits10,
vpx_highbd_sad8x16_avg_bits10, vpx_highbd_10_variance8x16,
vpx_highbd_10_sub_pixel_variance8x16,
vpx_highbd_10_sub_pixel_avg_variance8x16,
vpx_highbd_sad8x16x3_bits10, vpx_highbd_sad8x16x8_bits10,
vpx_highbd_sad8x16x4d_bits10)
HIGHBD_BFP(
BLOCK_8X8, vpx_highbd_sad8x8_bits10, vpx_highbd_sad8x8_avg_bits10,
vpx_highbd_10_variance8x8, vpx_highbd_10_sub_pixel_variance8x8,
vpx_highbd_10_sub_pixel_avg_variance8x8, vpx_highbd_sad8x8x3_bits10,
vpx_highbd_sad8x8x8_bits10, vpx_highbd_sad8x8x4d_bits10)
HIGHBD_BFP(BLOCK_8X4, vpx_highbd_sad8x4_bits10,
vpx_highbd_sad8x4_avg_bits10, vpx_highbd_10_variance8x4,
vpx_highbd_10_sub_pixel_variance8x4,
vpx_highbd_10_sub_pixel_avg_variance8x4, NULL,
vpx_highbd_sad8x4x8_bits10, vpx_highbd_sad8x4x4d_bits10)
HIGHBD_BFP(BLOCK_4X8, vpx_highbd_sad4x8_bits10,
vpx_highbd_sad4x8_avg_bits10, vpx_highbd_10_variance4x8,
vpx_highbd_10_sub_pixel_variance4x8,
vpx_highbd_10_sub_pixel_avg_variance4x8, NULL,
vpx_highbd_sad4x8x8_bits10, vpx_highbd_sad4x8x4d_bits10)
HIGHBD_BFP(
BLOCK_4X4, vpx_highbd_sad4x4_bits10, vpx_highbd_sad4x4_avg_bits10,
vpx_highbd_10_variance4x4, vpx_highbd_10_sub_pixel_variance4x4,
vpx_highbd_10_sub_pixel_avg_variance4x4, vpx_highbd_sad4x4x3_bits10,
vpx_highbd_sad4x4x8_bits10, vpx_highbd_sad4x4x4d_bits10)
break;
case VPX_BITS_12:
HIGHBD_BFP(BLOCK_32X16, vpx_highbd_sad32x16_bits12,
vpx_highbd_sad32x16_avg_bits12, vpx_highbd_12_variance32x16,
vpx_highbd_12_sub_pixel_variance32x16,
vpx_highbd_12_sub_pixel_avg_variance32x16, NULL, NULL,
vpx_highbd_sad32x16x4d_bits12)
HIGHBD_BFP(BLOCK_16X32, vpx_highbd_sad16x32_bits12,
vpx_highbd_sad16x32_avg_bits12, vpx_highbd_12_variance16x32,
vpx_highbd_12_sub_pixel_variance16x32,
vpx_highbd_12_sub_pixel_avg_variance16x32, NULL, NULL,
vpx_highbd_sad16x32x4d_bits12)
HIGHBD_BFP(BLOCK_64X32, vpx_highbd_sad64x32_bits12,
vpx_highbd_sad64x32_avg_bits12, vpx_highbd_12_variance64x32,
vpx_highbd_12_sub_pixel_variance64x32,
vpx_highbd_12_sub_pixel_avg_variance64x32, NULL, NULL,
vpx_highbd_sad64x32x4d_bits12)
HIGHBD_BFP(BLOCK_32X64, vpx_highbd_sad32x64_bits12,
vpx_highbd_sad32x64_avg_bits12, vpx_highbd_12_variance32x64,
vpx_highbd_12_sub_pixel_variance32x64,
vpx_highbd_12_sub_pixel_avg_variance32x64, NULL, NULL,
vpx_highbd_sad32x64x4d_bits12)
HIGHBD_BFP(BLOCK_32X32, vpx_highbd_sad32x32_bits12,
vpx_highbd_sad32x32_avg_bits12, vpx_highbd_12_variance32x32,
vpx_highbd_12_sub_pixel_variance32x32,
vpx_highbd_12_sub_pixel_avg_variance32x32,
vpx_highbd_sad32x32x3_bits12, vpx_highbd_sad32x32x8_bits12,
vpx_highbd_sad32x32x4d_bits12)
HIGHBD_BFP(BLOCK_64X64, vpx_highbd_sad64x64_bits12,
vpx_highbd_sad64x64_avg_bits12, vpx_highbd_12_variance64x64,
vpx_highbd_12_sub_pixel_variance64x64,
vpx_highbd_12_sub_pixel_avg_variance64x64,
vpx_highbd_sad64x64x3_bits12, vpx_highbd_sad64x64x8_bits12,
vpx_highbd_sad64x64x4d_bits12)
HIGHBD_BFP(BLOCK_16X16, vpx_highbd_sad16x16_bits12,
vpx_highbd_sad16x16_avg_bits12, vpx_highbd_12_variance16x16,
vpx_highbd_12_sub_pixel_variance16x16,
vpx_highbd_12_sub_pixel_avg_variance16x16,
vpx_highbd_sad16x16x3_bits12, vpx_highbd_sad16x16x8_bits12,
vpx_highbd_sad16x16x4d_bits12)
HIGHBD_BFP(BLOCK_16X8, vpx_highbd_sad16x8_bits12,
vpx_highbd_sad16x8_avg_bits12, vpx_highbd_12_variance16x8,
vpx_highbd_12_sub_pixel_variance16x8,
vpx_highbd_12_sub_pixel_avg_variance16x8,
vpx_highbd_sad16x8x3_bits12, vpx_highbd_sad16x8x8_bits12,
vpx_highbd_sad16x8x4d_bits12)
HIGHBD_BFP(BLOCK_8X16, vpx_highbd_sad8x16_bits12,
vpx_highbd_sad8x16_avg_bits12, vpx_highbd_12_variance8x16,
vpx_highbd_12_sub_pixel_variance8x16,
vpx_highbd_12_sub_pixel_avg_variance8x16,
vpx_highbd_sad8x16x3_bits12, vpx_highbd_sad8x16x8_bits12,
vpx_highbd_sad8x16x4d_bits12)
HIGHBD_BFP(
BLOCK_8X8, vpx_highbd_sad8x8_bits12, vpx_highbd_sad8x8_avg_bits12,
vpx_highbd_12_variance8x8, vpx_highbd_12_sub_pixel_variance8x8,
vpx_highbd_12_sub_pixel_avg_variance8x8, vpx_highbd_sad8x8x3_bits12,
vpx_highbd_sad8x8x8_bits12, vpx_highbd_sad8x8x4d_bits12)
HIGHBD_BFP(BLOCK_8X4, vpx_highbd_sad8x4_bits12,
vpx_highbd_sad8x4_avg_bits12, vpx_highbd_12_variance8x4,
vpx_highbd_12_sub_pixel_variance8x4,
vpx_highbd_12_sub_pixel_avg_variance8x4, NULL,
vpx_highbd_sad8x4x8_bits12, vpx_highbd_sad8x4x4d_bits12)
HIGHBD_BFP(BLOCK_4X8, vpx_highbd_sad4x8_bits12,
vpx_highbd_sad4x8_avg_bits12, vpx_highbd_12_variance4x8,
vpx_highbd_12_sub_pixel_variance4x8,
vpx_highbd_12_sub_pixel_avg_variance4x8, NULL,
vpx_highbd_sad4x8x8_bits12, vpx_highbd_sad4x8x4d_bits12)
HIGHBD_BFP(
BLOCK_4X4, vpx_highbd_sad4x4_bits12, vpx_highbd_sad4x4_avg_bits12,
vpx_highbd_12_variance4x4, vpx_highbd_12_sub_pixel_variance4x4,
vpx_highbd_12_sub_pixel_avg_variance4x4, vpx_highbd_sad4x4x3_bits12,
vpx_highbd_sad4x4x8_bits12, vpx_highbd_sad4x4x4d_bits12)
break;
default:
assert(0 &&
"cm->bit_depth should be VPX_BITS_8, "
"VPX_BITS_10 or VPX_BITS_12");
}
}
}
#endif // CONFIG_VP9_HIGHBITDEPTH
static void realloc_segmentation_maps(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
// Create the encoder segmentation map and set all entries to 0
vpx_free(cpi->segmentation_map);
CHECK_MEM_ERROR(cm, cpi->segmentation_map,
vpx_calloc(cm->mi_rows * cm->mi_cols, 1));
// Create a map used for cyclic background refresh.
if (cpi->cyclic_refresh) vp9_cyclic_refresh_free(cpi->cyclic_refresh);
CHECK_MEM_ERROR(cm, cpi->cyclic_refresh,
vp9_cyclic_refresh_alloc(cm->mi_rows, cm->mi_cols));
// Create a map used to mark inactive areas.
vpx_free(cpi->active_map.map);
CHECK_MEM_ERROR(cm, cpi->active_map.map,
vpx_calloc(cm->mi_rows * cm->mi_cols, 1));
// And a place holder structure is the coding context
// for use if we want to save and restore it
vpx_free(cpi->coding_context.last_frame_seg_map_copy);
CHECK_MEM_ERROR(cm, cpi->coding_context.last_frame_seg_map_copy,
vpx_calloc(cm->mi_rows * cm->mi_cols, 1));
}
void vp9_change_config(struct VP9_COMP *cpi, const VP9EncoderConfig *oxcf) {
[WIP] Add column-based tiling. This patch adds column-based tiling. The idea is to make each tile independently decodable (after reading the common frame header) and also independendly encodable (minus within-frame cost adjustments in the RD loop) to speed-up hardware & software en/decoders if they used multi-threading. Column-based tiling has the added advantage (over other tiling methods) that it minimizes realtime use-case latency, since all threads can start encoding data as soon as the first SB-row worth of data is available to the encoder. There is some test code that does random tile ordering in the decoder, to confirm that each tile is indeed independently decodable from other tiles in the same frame. At tile edges, all contexts assume default values (i.e. 0, 0 motion vector, no coefficients, DC intra4x4 mode), and motion vector search and ordering do not cross tiles in the same frame. t log Tile independence is not maintained between frames ATM, i.e. tile 0 of frame 1 is free to use motion vectors that point into any tile of frame 0. We support 1 (i.e. no tiling), 2 or 4 column-tiles. The loopfilter crosses tile boundaries. I discussed this briefly with Aki and he says that's OK. An in-loop loopfilter would need to do some sync between tile threads, but that shouldn't be a big issue. Resuls: with tiling disabled, we go up slightly because of improved edge use in the intra4x4 prediction. With 2 tiles, we lose about ~1% on derf, ~0.35% on HD and ~0.55% on STD/HD. With 4 tiles, we lose another ~1.5% on derf ~0.77% on HD and ~0.85% on STD/HD. Most of this loss is concentrated in the low-bitrate end of clips, and most of it is because of the loss of edges at tile boundaries and the resulting loss of intra predictors. TODO: - more tiles (perhaps allow row-based tiling also, and max. 8 tiles)? - maybe optionally (for EC purposes), motion vectors themselves should not cross tile edges, or we should emulate such borders as if they were off-frame, to limit error propagation to within one tile only. This doesn't have to be the default behaviour but could be an optional bitstream flag. Change-Id: I5951c3a0742a767b20bc9fb5af685d9892c2c96f
2013-02-01 18:35:28 +01:00
VP9_COMMON *const cm = &cpi->common;
RATE_CONTROL *const rc = &cpi->rc;
int last_w = cpi->oxcf.width;
int last_h = cpi->oxcf.height;
2010-05-18 17:58:33 +02:00
if (cm->profile != oxcf->profile) cm->profile = oxcf->profile;
cm->bit_depth = oxcf->bit_depth;
cm->color_space = oxcf->color_space;
cm->color_range = oxcf->color_range;
cpi->target_level = oxcf->target_level;
cpi->keep_level_stats = oxcf->target_level != LEVEL_MAX;
if (cm->profile <= PROFILE_1)
assert(cm->bit_depth == VPX_BITS_8);
else
assert(cm->bit_depth > VPX_BITS_8);
2010-05-18 17:58:33 +02:00
cpi->oxcf = *oxcf;
#if CONFIG_VP9_HIGHBITDEPTH
cpi->td.mb.e_mbd.bd = (int)cm->bit_depth;
#endif // CONFIG_VP9_HIGHBITDEPTH
2010-05-18 17:58:33 +02:00
if ((oxcf->pass == 0) && (oxcf->rc_mode == VPX_Q)) {
rc->baseline_gf_interval = FIXED_GF_INTERVAL;
} else {
rc->baseline_gf_interval = (MIN_GF_INTERVAL + MAX_GF_INTERVAL) / 2;
}
2010-05-18 17:58:33 +02:00
cpi->refresh_golden_frame = 0;
cpi->refresh_last_frame = 1;
cm->refresh_frame_context = 1;
cm->reset_frame_context = 0;
2010-05-18 17:58:33 +02:00
vp9_reset_segment_features(&cm->seg);
vp9_set_high_precision_mv(cpi, 0);
2010-05-18 17:58:33 +02:00
{
int i;
2010-05-18 17:58:33 +02:00
for (i = 0; i < MAX_SEGMENTS; i++)
cpi->segment_encode_breakout[i] = cpi->oxcf.encode_breakout;
}
cpi->encode_breakout = cpi->oxcf.encode_breakout;
set_rc_buffer_sizes(rc, &cpi->oxcf);
// Under a configuration change, where maximum_buffer_size may change,
// keep buffer level clipped to the maximum allowed buffer size.
rc->bits_off_target = VPXMIN(rc->bits_off_target, rc->maximum_buffer_size);
rc->buffer_level = VPXMIN(rc->buffer_level, rc->maximum_buffer_size);
// Set up frame rate and related parameters rate control values.
vp9_new_framerate(cpi, cpi->framerate);
// Set absolute upper and lower quality limits
rc->worst_quality = cpi->oxcf.worst_allowed_q;
rc->best_quality = cpi->oxcf.best_allowed_q;
cm->interp_filter = cpi->sf.default_interp_filter;
2010-05-18 17:58:33 +02:00
if (cpi->oxcf.render_width > 0 && cpi->oxcf.render_height > 0) {
cm->render_width = cpi->oxcf.render_width;
cm->render_height = cpi->oxcf.render_height;
} else {
cm->render_width = cpi->oxcf.width;
cm->render_height = cpi->oxcf.height;
}
if (last_w != cpi->oxcf.width || last_h != cpi->oxcf.height) {
cm->width = cpi->oxcf.width;
cm->height = cpi->oxcf.height;
cpi->external_resize = 1;
}
2010-05-18 17:58:33 +02:00
if (cpi->initial_width) {
int new_mi_size = 0;
vp9_set_mb_mi(cm, cm->width, cm->height);
new_mi_size = cm->mi_stride * calc_mi_size(cm->mi_rows);
if (cm->mi_alloc_size < new_mi_size) {
vp9_free_context_buffers(cm);
alloc_compressor_data(cpi);
realloc_segmentation_maps(cpi);
cpi->initial_width = cpi->initial_height = 0;
cpi->external_resize = 0;
} else if (cm->mi_alloc_size == new_mi_size &&
(cpi->oxcf.width > last_w || cpi->oxcf.height > last_h)) {
vp9_alloc_loop_filter(cm);
}
}
update_frame_size(cpi);
2010-05-18 17:58:33 +02:00
if (last_w != cpi->oxcf.width || last_h != cpi->oxcf.height) {
memset(cpi->consec_zero_mv, 0,
cm->mi_rows * cm->mi_cols * sizeof(*cpi->consec_zero_mv));
if (cpi->oxcf.aq_mode == CYCLIC_REFRESH_AQ)
vp9_cyclic_refresh_reset_resize(cpi);
}
if ((cpi->svc.number_temporal_layers > 1 && cpi->oxcf.rc_mode == VPX_CBR) ||
((cpi->svc.number_temporal_layers > 1 ||
cpi->svc.number_spatial_layers > 1) &&
cpi->oxcf.pass != 1)) {
vp9_update_layer_context_change_config(cpi,
(int)cpi->oxcf.target_bandwidth);
}
cpi->alt_ref_source = NULL;
rc->is_src_frame_alt_ref = 0;
2010-05-18 17:58:33 +02:00
#if 0
// Experimental RD Code
cpi->frame_distortion = 0;
cpi->last_frame_distortion = 0;
2010-05-18 17:58:33 +02:00
#endif
set_tile_limits(cpi);
cpi->ext_refresh_frame_flags_pending = 0;
cpi->ext_refresh_frame_context_pending = 0;
#if CONFIG_VP9_HIGHBITDEPTH
highbd_set_var_fns(cpi);
#endif
2010-05-18 17:58:33 +02:00
}
#ifndef M_LOG2_E
2010-05-18 17:58:33 +02:00
#define M_LOG2_E 0.693147180559945309417
#endif
#define log2f(x) (log(x) / (float)M_LOG2_E)
/***********************************************************************
* Read before modifying 'cal_nmvjointsadcost' or 'cal_nmvsadcosts' *
***********************************************************************
* The following 2 functions ('cal_nmvjointsadcost' and *
* 'cal_nmvsadcosts') are used to calculate cost lookup tables *
* used by 'vp9_diamond_search_sad'. The C implementation of the *
* function is generic, but the AVX intrinsics optimised version *
* relies on the following properties of the computed tables: *
* For cal_nmvjointsadcost: *
* - mvjointsadcost[1] == mvjointsadcost[2] == mvjointsadcost[3] *
* For cal_nmvsadcosts: *
* - For all i: mvsadcost[0][i] == mvsadcost[1][i] *
* (Equal costs for both components) *
* - For all i: mvsadcost[0][i] == mvsadcost[0][-i] *
* (Cost function is even) *
* If these do not hold, then the AVX optimised version of the *
* 'vp9_diamond_search_sad' function cannot be used as it is, in which *
* case you can revert to using the C function instead. *
***********************************************************************/
static void cal_nmvjointsadcost(int *mvjointsadcost) {
/*********************************************************************
* Warning: Read the comments above before modifying this function *
*********************************************************************/
mvjointsadcost[0] = 600;
mvjointsadcost[1] = 300;
mvjointsadcost[2] = 300;
mvjointsadcost[3] = 300;
}
static void cal_nmvsadcosts(int *mvsadcost[2]) {
/*********************************************************************
* Warning: Read the comments above before modifying this function *
*********************************************************************/
int i = 1;
mvsadcost[0][0] = 0;
mvsadcost[1][0] = 0;
do {
double z = 256 * (2 * (log2f(8 * i) + .6));
mvsadcost[0][i] = (int)z;
mvsadcost[1][i] = (int)z;
mvsadcost[0][-i] = (int)z;
mvsadcost[1][-i] = (int)z;
} while (++i <= MV_MAX);
}
static void cal_nmvsadcosts_hp(int *mvsadcost[2]) {
int i = 1;
mvsadcost[0][0] = 0;
mvsadcost[1][0] = 0;
do {
double z = 256 * (2 * (log2f(8 * i) + .6));
mvsadcost[0][i] = (int)z;
mvsadcost[1][i] = (int)z;
mvsadcost[0][-i] = (int)z;
mvsadcost[1][-i] = (int)z;
} while (++i <= MV_MAX);
}
Try again to merge branch 'frame-parallel' into master branch. In frame parallel decode, libvpx decoder decodes several frames on all cpus in parallel fashion. If not being flushed, it will only return frame when all the cpus are busy. If getting flushed, it will return all the frames in the decoder. Compare with current serial decode mode in which libvpx decoder is idle between decode calls, libvpx decoder is busy between decode calls. Current frame parallel decode will only speed up the decoding for frame parallel encoded videos. For non frame parallel encoded videos, frame parallel decode is slower than serial decode due to lack of loopfilter worker thread. There are still some known issues that need to be addressed. For example: decode frame parallel videos with segmentation enabled is not right sometimes. * frame-parallel: Add error handling for frame parallel decode and unit test for that. Fix a bug in frame parallel decode and add a unit test for that. Add two test vectors to test frame parallel decode. Add key frame seeking to webmdec and webm_video_source. Implement frame parallel decode for VP9. Increase the thread test range to cover 5, 6, 7, 8 threads. Fix a bug in adding frame parallel unit test. Add VP9 frame-parallel unit test. Manually pick "Make the api behavior conform to api spec." from master branch. Move vp9_dec_build_inter_predictors_* to decoder folder. Add segmentation map array for current and last frame segmentation. Include the right header for VP9 worker thread. Move vp9_thread.* to common. ctrl_get_reference does not need user_priv. Seperate the frame buffers from VP9 encoder/decoder structure. Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:""" Conflicts: test/codec_factory.h test/decode_test_driver.cc test/decode_test_driver.h test/invalid_file_test.cc test/test-data.sha1 test/test.mk test/test_vectors.cc vp8/vp8_dx_iface.c vp9/common/vp9_alloccommon.c vp9/common/vp9_entropymode.c vp9/common/vp9_loopfilter_thread.c vp9/common/vp9_loopfilter_thread.h vp9/common/vp9_mvref_common.c vp9/common/vp9_onyxc_int.h vp9/common/vp9_reconinter.c vp9/decoder/vp9_decodeframe.c vp9/decoder/vp9_decodeframe.h vp9/decoder/vp9_decodemv.c vp9/decoder/vp9_decoder.c vp9/decoder/vp9_decoder.h vp9/encoder/vp9_encoder.c vp9/encoder/vp9_pickmode.c vp9/encoder/vp9_rdopt.c vp9/vp9_cx_iface.c vp9/vp9_dx_iface.c This reverts commit a18da9760a74d9ce6fb9f875706dc639c95402f5. Change-Id: I361442ffec1586d036ea2e0ee97ce4f077585f02
2015-01-27 21:26:28 +01:00
VP9_COMP *vp9_create_compressor(VP9EncoderConfig *oxcf,
BufferPool *const pool) {
unsigned int i;
VP9_COMP *volatile const cpi = vpx_memalign(32, sizeof(VP9_COMP));
VP9_COMMON *volatile const cm = cpi != NULL ? &cpi->common : NULL;
2010-05-18 17:58:33 +02:00
if (!cm) return NULL;
2010-05-18 17:58:33 +02:00
vp9_zero(*cpi);
2010-05-18 17:58:33 +02:00
if (setjmp(cm->error.jmp)) {
cm->error.setjmp = 0;
vp9_remove_compressor(cpi);
return 0;
}
cm->error.setjmp = 1;
cm->alloc_mi = vp9_enc_alloc_mi;
cm->free_mi = vp9_enc_free_mi;
cm->setup_mi = vp9_enc_setup_mi;
CHECK_MEM_ERROR(cm, cm->fc, (FRAME_CONTEXT *)vpx_calloc(1, sizeof(*cm->fc)));
CHECK_MEM_ERROR(
cm, cm->frame_contexts,
(FRAME_CONTEXT *)vpx_calloc(FRAME_CONTEXTS, sizeof(*cm->frame_contexts)));
cpi->use_svc = 0;
cpi->resize_state = 0;
cpi->external_resize = 0;
cpi->resize_avg_qp = 0;
cpi->resize_buffer_underflow = 0;
cpi->use_skin_detection = 0;
Try again to merge branch 'frame-parallel' into master branch. In frame parallel decode, libvpx decoder decodes several frames on all cpus in parallel fashion. If not being flushed, it will only return frame when all the cpus are busy. If getting flushed, it will return all the frames in the decoder. Compare with current serial decode mode in which libvpx decoder is idle between decode calls, libvpx decoder is busy between decode calls. Current frame parallel decode will only speed up the decoding for frame parallel encoded videos. For non frame parallel encoded videos, frame parallel decode is slower than serial decode due to lack of loopfilter worker thread. There are still some known issues that need to be addressed. For example: decode frame parallel videos with segmentation enabled is not right sometimes. * frame-parallel: Add error handling for frame parallel decode and unit test for that. Fix a bug in frame parallel decode and add a unit test for that. Add two test vectors to test frame parallel decode. Add key frame seeking to webmdec and webm_video_source. Implement frame parallel decode for VP9. Increase the thread test range to cover 5, 6, 7, 8 threads. Fix a bug in adding frame parallel unit test. Add VP9 frame-parallel unit test. Manually pick "Make the api behavior conform to api spec." from master branch. Move vp9_dec_build_inter_predictors_* to decoder folder. Add segmentation map array for current and last frame segmentation. Include the right header for VP9 worker thread. Move vp9_thread.* to common. ctrl_get_reference does not need user_priv. Seperate the frame buffers from VP9 encoder/decoder structure. Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:""" Conflicts: test/codec_factory.h test/decode_test_driver.cc test/decode_test_driver.h test/invalid_file_test.cc test/test-data.sha1 test/test.mk test/test_vectors.cc vp8/vp8_dx_iface.c vp9/common/vp9_alloccommon.c vp9/common/vp9_entropymode.c vp9/common/vp9_loopfilter_thread.c vp9/common/vp9_loopfilter_thread.h vp9/common/vp9_mvref_common.c vp9/common/vp9_onyxc_int.h vp9/common/vp9_reconinter.c vp9/decoder/vp9_decodeframe.c vp9/decoder/vp9_decodeframe.h vp9/decoder/vp9_decodemv.c vp9/decoder/vp9_decoder.c vp9/decoder/vp9_decoder.h vp9/encoder/vp9_encoder.c vp9/encoder/vp9_pickmode.c vp9/encoder/vp9_rdopt.c vp9/vp9_cx_iface.c vp9/vp9_dx_iface.c This reverts commit a18da9760a74d9ce6fb9f875706dc639c95402f5. Change-Id: I361442ffec1586d036ea2e0ee97ce4f077585f02
2015-01-27 21:26:28 +01:00
cpi->common.buffer_pool = pool;
cpi->force_update_segmentation = 0;
init_config(cpi, oxcf);
vp9_rc_init(&cpi->oxcf, oxcf->pass, &cpi->rc);
cm->current_video_frame = 0;
cpi->partition_search_skippable_frame = 0;
cpi->tile_data = NULL;
realloc_segmentation_maps(cpi);
CHECK_MEM_ERROR(cm, cpi->alt_ref_aq, vp9_alt_ref_aq_create());
CHECK_MEM_ERROR(
cm, cpi->consec_zero_mv,
vpx_calloc(cm->mi_rows * cm->mi_cols, sizeof(*cpi->consec_zero_mv)));
CHECK_MEM_ERROR(cm, cpi->nmvcosts[0],
vpx_calloc(MV_VALS, sizeof(*cpi->nmvcosts[0])));
CHECK_MEM_ERROR(cm, cpi->nmvcosts[1],
vpx_calloc(MV_VALS, sizeof(*cpi->nmvcosts[1])));
CHECK_MEM_ERROR(cm, cpi->nmvcosts_hp[0],
vpx_calloc(MV_VALS, sizeof(*cpi->nmvcosts_hp[0])));
CHECK_MEM_ERROR(cm, cpi->nmvcosts_hp[1],
vpx_calloc(MV_VALS, sizeof(*cpi->nmvcosts_hp[1])));
CHECK_MEM_ERROR(cm, cpi->nmvsadcosts[0],
vpx_calloc(MV_VALS, sizeof(*cpi->nmvsadcosts[0])));
CHECK_MEM_ERROR(cm, cpi->nmvsadcosts[1],
vpx_calloc(MV_VALS, sizeof(*cpi->nmvsadcosts[1])));
CHECK_MEM_ERROR(cm, cpi->nmvsadcosts_hp[0],
vpx_calloc(MV_VALS, sizeof(*cpi->nmvsadcosts_hp[0])));
CHECK_MEM_ERROR(cm, cpi->nmvsadcosts_hp[1],
vpx_calloc(MV_VALS, sizeof(*cpi->nmvsadcosts_hp[1])));
for (i = 0; i < (sizeof(cpi->mbgraph_stats) / sizeof(cpi->mbgraph_stats[0]));
i++) {
CHECK_MEM_ERROR(
cm, cpi->mbgraph_stats[i].mb_stats,
vpx_calloc(cm->MBs * sizeof(*cpi->mbgraph_stats[i].mb_stats), 1));
}
2011-10-05 12:26:00 +02:00
#if CONFIG_FP_MB_STATS
cpi->use_fp_mb_stats = 0;
if (cpi->use_fp_mb_stats) {
// a place holder used to store the first pass mb stats in the first pass
CHECK_MEM_ERROR(cm, cpi->twopass.frame_mb_stats_buf,
vpx_calloc(cm->MBs * sizeof(uint8_t), 1));
} else {
cpi->twopass.frame_mb_stats_buf = NULL;
}
#endif
cpi->refresh_alt_ref_frame = 0;
cpi->multi_arf_last_grp_enabled = 0;
2010-05-18 17:58:33 +02:00
cpi->b_calculate_psnr = CONFIG_INTERNAL_STATS;
init_level_info(&cpi->level_info);
#if CONFIG_INTERNAL_STATS
cpi->b_calculate_blockiness = 1;
cpi->b_calculate_consistency = 1;
cpi->total_inconsistency = 0;
cpi->psnr.worst = 100.0;
cpi->worst_ssim = 100.0;
cpi->count = 0;
cpi->bytes = 0;
if (cpi->b_calculate_psnr) {
cpi->total_sq_error = 0;
cpi->total_samples = 0;
cpi->totalp_sq_error = 0;
cpi->totalp_samples = 0;
cpi->tot_recode_hits = 0;
cpi->summed_quality = 0;
cpi->summed_weights = 0;
cpi->summedp_quality = 0;
cpi->summedp_weights = 0;
}
cpi->fastssim.worst = 100.0;
cpi->psnrhvs.worst = 100.0;
if (cpi->b_calculate_blockiness) {
cpi->total_blockiness = 0;
cpi->worst_blockiness = 0.0;
}
if (cpi->b_calculate_consistency) {
CHECK_MEM_ERROR(cm, cpi->ssim_vars,
vpx_malloc(sizeof(*cpi->ssim_vars) * 4 *
cpi->common.mi_rows * cpi->common.mi_cols));
cpi->worst_consistency = 100.0;
}
#endif
cpi->first_time_stamp_ever = INT64_MAX;
2010-05-18 17:58:33 +02:00
/*********************************************************************
* Warning: Read the comments around 'cal_nmvjointsadcost' and *
* 'cal_nmvsadcosts' before modifying how these tables are computed. *
*********************************************************************/
cal_nmvjointsadcost(cpi->td.mb.nmvjointsadcost);
cpi->td.mb.nmvcost[0] = &cpi->nmvcosts[0][MV_MAX];
cpi->td.mb.nmvcost[1] = &cpi->nmvcosts[1][MV_MAX];
cpi->td.mb.nmvsadcost[0] = &cpi->nmvsadcosts[0][MV_MAX];
cpi->td.mb.nmvsadcost[1] = &cpi->nmvsadcosts[1][MV_MAX];
cal_nmvsadcosts(cpi->td.mb.nmvsadcost);
cpi->td.mb.nmvcost_hp[0] = &cpi->nmvcosts_hp[0][MV_MAX];
cpi->td.mb.nmvcost_hp[1] = &cpi->nmvcosts_hp[1][MV_MAX];
cpi->td.mb.nmvsadcost_hp[0] = &cpi->nmvsadcosts_hp[0][MV_MAX];
cpi->td.mb.nmvsadcost_hp[1] = &cpi->nmvsadcosts_hp[1][MV_MAX];
cal_nmvsadcosts_hp(cpi->td.mb.nmvsadcost_hp);
#if CONFIG_VP9_TEMPORAL_DENOISING
#ifdef OUTPUT_YUV_DENOISED
yuv_denoised_file = fopen("denoised.yuv", "ab");
#endif
#endif
#ifdef OUTPUT_YUV_SKINMAP
yuv_skinmap_file = fopen("skinmap.yuv", "ab");
#endif
#ifdef OUTPUT_YUV_REC
yuv_rec_file = fopen("rec.yuv", "wb");
#endif
2010-05-18 17:58:33 +02:00
#if 0
framepsnr = fopen("framepsnr.stt", "a");
kf_list = fopen("kf_list.stt", "w");
2010-05-18 17:58:33 +02:00
#endif
cpi->allow_encode_breakout = ENCODE_BREAKOUT_ENABLED;
if (oxcf->pass == 1) {
vp9_init_first_pass(cpi);
} else if (oxcf->pass == 2) {
const size_t packet_sz = sizeof(FIRSTPASS_STATS);
const int packets = (int)(oxcf->two_pass_stats_in.sz / packet_sz);
2010-05-18 17:58:33 +02:00
if (cpi->svc.number_spatial_layers > 1 ||
cpi->svc.number_temporal_layers > 1) {
FIRSTPASS_STATS *const stats = oxcf->two_pass_stats_in.buf;
FIRSTPASS_STATS *stats_copy[VPX_SS_MAX_LAYERS] = { 0 };
int i;
for (i = 0; i < oxcf->ss_number_layers; ++i) {
FIRSTPASS_STATS *const last_packet_for_layer =
&stats[packets - oxcf->ss_number_layers + i];
const int layer_id = (int)last_packet_for_layer->spatial_layer_id;
const int packets_in_layer = (int)last_packet_for_layer->count + 1;
if (layer_id >= 0 && layer_id < oxcf->ss_number_layers) {
LAYER_CONTEXT *const lc = &cpi->svc.layer_context[layer_id];
vpx_free(lc->rc_twopass_stats_in.buf);
lc->rc_twopass_stats_in.sz = packets_in_layer * packet_sz;
CHECK_MEM_ERROR(cm, lc->rc_twopass_stats_in.buf,
vpx_malloc(lc->rc_twopass_stats_in.sz));
lc->twopass.stats_in_start = lc->rc_twopass_stats_in.buf;
lc->twopass.stats_in = lc->twopass.stats_in_start;
lc->twopass.stats_in_end =
lc->twopass.stats_in_start + packets_in_layer - 1;
stats_copy[layer_id] = lc->rc_twopass_stats_in.buf;
}
}
for (i = 0; i < packets; ++i) {
const int layer_id = (int)stats[i].spatial_layer_id;
if (layer_id >= 0 && layer_id < oxcf->ss_number_layers &&
stats_copy[layer_id] != NULL) {
*stats_copy[layer_id] = stats[i];
++stats_copy[layer_id];
}
}
vp9_init_second_pass_spatial_svc(cpi);
} else {
#if CONFIG_FP_MB_STATS
if (cpi->use_fp_mb_stats) {
const size_t psz = cpi->common.MBs * sizeof(uint8_t);
const int ps = (int)(oxcf->firstpass_mb_stats_in.sz / psz);
cpi->twopass.firstpass_mb_stats.mb_stats_start =
oxcf->firstpass_mb_stats_in.buf;
cpi->twopass.firstpass_mb_stats.mb_stats_end =
cpi->twopass.firstpass_mb_stats.mb_stats_start +
(ps - 1) * cpi->common.MBs * sizeof(uint8_t);
}
#endif
cpi->twopass.stats_in_start = oxcf->two_pass_stats_in.buf;
cpi->twopass.stats_in = cpi->twopass.stats_in_start;
cpi->twopass.stats_in_end = &cpi->twopass.stats_in[packets - 1];
vp9_init_second_pass(cpi);
}
}
2010-05-18 17:58:33 +02:00
vp9_set_speed_features_framesize_independent(cpi);
vp9_set_speed_features_framesize_dependent(cpi);
// Allocate memory to store variances for a frame.
CHECK_MEM_ERROR(cm, cpi->source_diff_var, vpx_calloc(cm->MBs, sizeof(diff)));
cpi->source_var_thresh = 0;
cpi->frames_till_next_var_check = 0;
#define BFP(BT, SDF, SDAF, VF, SVF, SVAF, SDX3F, SDX8F, SDX4DF) \
cpi->fn_ptr[BT].sdf = SDF; \
cpi->fn_ptr[BT].sdaf = SDAF; \
cpi->fn_ptr[BT].vf = VF; \
cpi->fn_ptr[BT].svf = SVF; \
cpi->fn_ptr[BT].svaf = SVAF; \
cpi->fn_ptr[BT].sdx3f = SDX3F; \
cpi->fn_ptr[BT].sdx8f = SDX8F; \
cpi->fn_ptr[BT].sdx4df = SDX4DF;
BFP(BLOCK_32X16, vpx_sad32x16, vpx_sad32x16_avg, vpx_variance32x16,
vpx_sub_pixel_variance32x16, vpx_sub_pixel_avg_variance32x16, NULL, NULL,
vpx_sad32x16x4d)
BFP(BLOCK_16X32, vpx_sad16x32, vpx_sad16x32_avg, vpx_variance16x32,
vpx_sub_pixel_variance16x32, vpx_sub_pixel_avg_variance16x32, NULL, NULL,
vpx_sad16x32x4d)
BFP(BLOCK_64X32, vpx_sad64x32, vpx_sad64x32_avg, vpx_variance64x32,
vpx_sub_pixel_variance64x32, vpx_sub_pixel_avg_variance64x32, NULL, NULL,
vpx_sad64x32x4d)
BFP(BLOCK_32X64, vpx_sad32x64, vpx_sad32x64_avg, vpx_variance32x64,
vpx_sub_pixel_variance32x64, vpx_sub_pixel_avg_variance32x64, NULL, NULL,
vpx_sad32x64x4d)
BFP(BLOCK_32X32, vpx_sad32x32, vpx_sad32x32_avg, vpx_variance32x32,
vpx_sub_pixel_variance32x32, vpx_sub_pixel_avg_variance32x32,
vpx_sad32x32x3, vpx_sad32x32x8, vpx_sad32x32x4d)
BFP(BLOCK_64X64, vpx_sad64x64, vpx_sad64x64_avg, vpx_variance64x64,
vpx_sub_pixel_variance64x64, vpx_sub_pixel_avg_variance64x64,
vpx_sad64x64x3, vpx_sad64x64x8, vpx_sad64x64x4d)
BFP(BLOCK_16X16, vpx_sad16x16, vpx_sad16x16_avg, vpx_variance16x16,
vpx_sub_pixel_variance16x16, vpx_sub_pixel_avg_variance16x16,
vpx_sad16x16x3, vpx_sad16x16x8, vpx_sad16x16x4d)
BFP(BLOCK_16X8, vpx_sad16x8, vpx_sad16x8_avg, vpx_variance16x8,
vpx_sub_pixel_variance16x8, vpx_sub_pixel_avg_variance16x8, vpx_sad16x8x3,
vpx_sad16x8x8, vpx_sad16x8x4d)
BFP(BLOCK_8X16, vpx_sad8x16, vpx_sad8x16_avg, vpx_variance8x16,
vpx_sub_pixel_variance8x16, vpx_sub_pixel_avg_variance8x16, vpx_sad8x16x3,
vpx_sad8x16x8, vpx_sad8x16x4d)
BFP(BLOCK_8X8, vpx_sad8x8, vpx_sad8x8_avg, vpx_variance8x8,
vpx_sub_pixel_variance8x8, vpx_sub_pixel_avg_variance8x8, vpx_sad8x8x3,
vpx_sad8x8x8, vpx_sad8x8x4d)
BFP(BLOCK_8X4, vpx_sad8x4, vpx_sad8x4_avg, vpx_variance8x4,
vpx_sub_pixel_variance8x4, vpx_sub_pixel_avg_variance8x4, NULL,
vpx_sad8x4x8, vpx_sad8x4x4d)
BFP(BLOCK_4X8, vpx_sad4x8, vpx_sad4x8_avg, vpx_variance4x8,
vpx_sub_pixel_variance4x8, vpx_sub_pixel_avg_variance4x8, NULL,
vpx_sad4x8x8, vpx_sad4x8x4d)
BFP(BLOCK_4X4, vpx_sad4x4, vpx_sad4x4_avg, vpx_variance4x4,
vpx_sub_pixel_variance4x4, vpx_sub_pixel_avg_variance4x4, vpx_sad4x4x3,
vpx_sad4x4x8, vpx_sad4x4x4d)
2010-05-18 17:58:33 +02:00
#if CONFIG_VP9_HIGHBITDEPTH
highbd_set_var_fns(cpi);
#endif
/* vp9_init_quantizer() is first called here. Add check in
* vp9_frame_init_quantizer() so that vp9_init_quantizer is only
* called later when needed. This will avoid unnecessary calls of
* vp9_init_quantizer() for every frame.
*/
vp9_init_quantizer(cpi);
vp9_loop_filter_init(cm);
cm->error.setjmp = 0;
return cpi;
2010-05-18 17:58:33 +02:00
}
#if CONFIG_INTERNAL_STATS
#define SNPRINT(H, T) snprintf((H) + strlen(H), sizeof(H) - strlen(H), (T))
#define SNPRINT2(H, T, V) \
snprintf((H) + strlen(H), sizeof(H) - strlen(H), (T), (V))
#endif // CONFIG_INTERNAL_STATS
void vp9_remove_compressor(VP9_COMP *cpi) {
VP9_COMMON *cm;
unsigned int i;
int t;
2010-05-18 17:58:33 +02:00
if (!cpi) return;
2010-05-18 17:58:33 +02:00
cm = &cpi->common;
if (cm->current_video_frame > 0) {
#if CONFIG_INTERNAL_STATS
vpx_clear_system_state();
if (cpi->oxcf.pass != 1) {
char headings[512] = { 0 };
char results[512] = { 0 };
FILE *f = fopen("opsnr.stt", "a");
double time_encoded =
(cpi->last_end_time_stamp_seen - cpi->first_time_stamp_ever) /
10000000.000;
double total_encode_time =
(cpi->time_receive_data + cpi->time_compress_data) / 1000.000;
const double dr =
(double)cpi->bytes * (double)8 / (double)1000 / time_encoded;
const double peak = (double)((1 << cpi->oxcf.input_bit_depth) - 1);
const double target_rate = (double)cpi->oxcf.target_bandwidth / 1000;
const double rate_err = ((100.0 * (dr - target_rate)) / target_rate);
if (cpi->b_calculate_psnr) {
const double total_psnr = vpx_sse_to_psnr(
(double)cpi->total_samples, peak, (double)cpi->total_sq_error);
const double totalp_psnr = vpx_sse_to_psnr(
(double)cpi->totalp_samples, peak, (double)cpi->totalp_sq_error);
const double total_ssim =
100 * pow(cpi->summed_quality / cpi->summed_weights, 8.0);
const double totalp_ssim =
100 * pow(cpi->summedp_quality / cpi->summedp_weights, 8.0);
snprintf(headings, sizeof(headings),
"Bitrate\tAVGPsnr\tGLBPsnr\tAVPsnrP\tGLPsnrP\t"
"VPXSSIM\tVPSSIMP\tFASTSIM\tPSNRHVS\t"
"WstPsnr\tWstSsim\tWstFast\tWstHVS");
snprintf(results, sizeof(results),
"%7.2f\t%7.3f\t%7.3f\t%7.3f\t%7.3f\t"
"%7.3f\t%7.3f\t%7.3f\t%7.3f\t"
"%7.3f\t%7.3f\t%7.3f\t%7.3f",
dr, cpi->psnr.stat[ALL] / cpi->count, total_psnr,
cpi->psnrp.stat[ALL] / cpi->count, totalp_psnr, total_ssim,
totalp_ssim, cpi->fastssim.stat[ALL] / cpi->count,
cpi->psnrhvs.stat[ALL] / cpi->count, cpi->psnr.worst,
cpi->worst_ssim, cpi->fastssim.worst, cpi->psnrhvs.worst);
if (cpi->b_calculate_blockiness) {
SNPRINT(headings, "\t Block\tWstBlck");
SNPRINT2(results, "\t%7.3f", cpi->total_blockiness / cpi->count);
SNPRINT2(results, "\t%7.3f", cpi->worst_blockiness);
}
2010-05-18 17:58:33 +02:00
if (cpi->b_calculate_consistency) {
double consistency =
vpx_sse_to_psnr((double)cpi->totalp_samples, peak,
(double)cpi->total_inconsistency);
SNPRINT(headings, "\tConsist\tWstCons");
SNPRINT2(results, "\t%7.3f", consistency);
SNPRINT2(results, "\t%7.3f", cpi->worst_consistency);
}
fprintf(f, "%s\t Time\tRcErr\tAbsErr\n", headings);
fprintf(f, "%s\t%8.0f\t%7.2f\t%7.2f\n", results, total_encode_time,
rate_err, fabs(rate_err));
}
2010-05-18 17:58:33 +02:00
fclose(f);
}
2010-05-18 17:58:33 +02:00
#endif
#if 0
{
printf("\n_pick_loop_filter_level:%d\n", cpi->time_pick_lpf / 1000);
printf("\n_frames recive_data encod_mb_row compress_frame Total\n");
printf("%6d %10ld %10ld %10ld %10ld\n", cpi->common.current_video_frame,
cpi->time_receive_data / 1000, cpi->time_encode_sb_row / 1000,
cpi->time_compress_data / 1000,
(cpi->time_receive_data + cpi->time_compress_data) / 1000);
}
2010-05-18 17:58:33 +02:00
#endif
}
2010-05-18 17:58:33 +02:00
#if CONFIG_VP9_TEMPORAL_DENOISING
vp9_denoiser_free(&(cpi->denoiser));
#endif
for (t = 0; t < cpi->num_workers; ++t) {
VPxWorker *const worker = &cpi->workers[t];
EncWorkerData *const thread_data = &cpi->tile_thr_data[t];
// Deallocate allocated threads.
vpx_get_worker_interface()->end(worker);
// Deallocate allocated thread data.
if (t < cpi->num_workers - 1) {
vpx_free(thread_data->td->counts);
vp9_free_pc_tree(thread_data->td);
vpx_free(thread_data->td);
}
}
vpx_free(cpi->tile_thr_data);
vpx_free(cpi->workers);
if (cpi->num_workers > 1) vp9_loop_filter_dealloc(&cpi->lf_row_sync);
vp9_alt_ref_aq_destroy(cpi->alt_ref_aq);
dealloc_compressor_data(cpi);
2010-05-18 17:58:33 +02:00
for (i = 0; i < sizeof(cpi->mbgraph_stats) / sizeof(cpi->mbgraph_stats[0]);
++i) {
vpx_free(cpi->mbgraph_stats[i].mb_stats);
}
2011-10-05 12:26:00 +02:00
#if CONFIG_FP_MB_STATS
if (cpi->use_fp_mb_stats) {
vpx_free(cpi->twopass.frame_mb_stats_buf);
cpi->twopass.frame_mb_stats_buf = NULL;
}
#endif
vp9_remove_common(cm);
vp9_free_ref_frame_buffers(cm->buffer_pool);
#if CONFIG_VP9_POSTPROC
vp9_free_postproc_buffers(cm);
#endif
vpx_free(cpi);
2010-05-18 17:58:33 +02:00
#if CONFIG_VP9_TEMPORAL_DENOISING
#ifdef OUTPUT_YUV_DENOISED
fclose(yuv_denoised_file);
#endif
#endif
#ifdef OUTPUT_YUV_SKINMAP
fclose(yuv_skinmap_file);
#endif
#ifdef OUTPUT_YUV_REC
fclose(yuv_rec_file);
#endif
2010-05-18 17:58:33 +02:00
#if 0
if (keyfile)
fclose(keyfile);
2010-05-18 17:58:33 +02:00
if (framepsnr)
fclose(framepsnr);
2010-05-18 17:58:33 +02:00
if (kf_list)
fclose(kf_list);
2010-05-18 17:58:33 +02:00
#endif
}
static void generate_psnr_packet(VP9_COMP *cpi) {
struct vpx_codec_cx_pkt pkt;
int i;
PSNR_STATS psnr;
#if CONFIG_VP9_HIGHBITDEPTH
vpx_calc_highbd_psnr(cpi->raw_source_frame, cpi->common.frame_to_show, &psnr,
cpi->td.mb.e_mbd.bd, cpi->oxcf.input_bit_depth);
#else
vpx_calc_psnr(cpi->raw_source_frame, cpi->common.frame_to_show, &psnr);
#endif
for (i = 0; i < 4; ++i) {
pkt.data.psnr.samples[i] = psnr.samples[i];
pkt.data.psnr.sse[i] = psnr.sse[i];
pkt.data.psnr.psnr[i] = psnr.psnr[i];
}
pkt.kind = VPX_CODEC_PSNR_PKT;
if (cpi->use_svc)
cpi->svc.layer_context[cpi->svc.spatial_layer_id *
cpi->svc.number_temporal_layers]
.psnr_pkt = pkt.data.psnr;
else
vpx_codec_pkt_list_add(cpi->output_pkt_list, &pkt);
}
2010-05-18 17:58:33 +02:00
int vp9_use_as_reference(VP9_COMP *cpi, int ref_frame_flags) {
if (ref_frame_flags > 7) return -1;
2010-05-18 17:58:33 +02:00
cpi->ref_frame_flags = ref_frame_flags;
return 0;
2010-05-18 17:58:33 +02:00
}
void vp9_update_reference(VP9_COMP *cpi, int ref_frame_flags) {
cpi->ext_refresh_golden_frame = (ref_frame_flags & VP9_GOLD_FLAG) != 0;
cpi->ext_refresh_alt_ref_frame = (ref_frame_flags & VP9_ALT_FLAG) != 0;
cpi->ext_refresh_last_frame = (ref_frame_flags & VP9_LAST_FLAG) != 0;
cpi->ext_refresh_frame_flags_pending = 1;
2010-05-18 17:58:33 +02:00
}
static YV12_BUFFER_CONFIG *get_vp9_ref_frame_buffer(
VP9_COMP *cpi, VP9_REFFRAME ref_frame_flag) {
MV_REFERENCE_FRAME ref_frame = NONE;
if (ref_frame_flag == VP9_LAST_FLAG)
ref_frame = LAST_FRAME;
else if (ref_frame_flag == VP9_GOLD_FLAG)
ref_frame = GOLDEN_FRAME;
else if (ref_frame_flag == VP9_ALT_FLAG)
ref_frame = ALTREF_FRAME;
return ref_frame == NONE ? NULL : get_ref_frame_buffer(cpi, ref_frame);
}
2010-05-18 17:58:33 +02:00
int vp9_copy_reference_enc(VP9_COMP *cpi, VP9_REFFRAME ref_frame_flag,
YV12_BUFFER_CONFIG *sd) {
YV12_BUFFER_CONFIG *cfg = get_vp9_ref_frame_buffer(cpi, ref_frame_flag);
if (cfg) {
vp8_yv12_copy_frame(cfg, sd);
return 0;
} else {
return -1;
}
2010-05-18 17:58:33 +02:00
}
int vp9_set_reference_enc(VP9_COMP *cpi, VP9_REFFRAME ref_frame_flag,
YV12_BUFFER_CONFIG *sd) {
YV12_BUFFER_CONFIG *cfg = get_vp9_ref_frame_buffer(cpi, ref_frame_flag);
if (cfg) {
vp8_yv12_copy_frame(sd, cfg);
return 0;
} else {
return -1;
}
}
int vp9_update_entropy(VP9_COMP *cpi, int update) {
cpi->ext_refresh_frame_context = update;
cpi->ext_refresh_frame_context_pending = 1;
return 0;
}
2010-05-18 17:58:33 +02:00
#if defined(OUTPUT_YUV_DENOISED) || defined(OUTPUT_YUV_SKINMAP)
// The denoiser buffer is allocated as a YUV 440 buffer. This function writes it
// as YUV 420. We simply use the top-left pixels of the UV buffers, since we do
// not denoise the UV channels at this time. If ever we implement UV channel
// denoising we will have to modify this.
void vp9_write_yuv_frame_420(YV12_BUFFER_CONFIG *s, FILE *f) {
uint8_t *src = s->y_buffer;
int h = s->y_height;
do {
fwrite(src, s->y_width, 1, f);
src += s->y_stride;
} while (--h);
src = s->u_buffer;
h = s->uv_height;
do {
fwrite(src, s->uv_width, 1, f);
src += s->uv_stride;
} while (--h);
src = s->v_buffer;
h = s->uv_height;
do {
fwrite(src, s->uv_width, 1, f);
src += s->uv_stride;
} while (--h);
}
#endif
#ifdef OUTPUT_YUV_REC
void vp9_write_yuv_rec_frame(VP9_COMMON *cm) {
YV12_BUFFER_CONFIG *s = cm->frame_to_show;
uint8_t *src = s->y_buffer;
int h = cm->height;
#if CONFIG_VP9_HIGHBITDEPTH
if (s->flags & YV12_FLAG_HIGHBITDEPTH) {
uint16_t *src16 = CONVERT_TO_SHORTPTR(s->y_buffer);
do {
fwrite(src16, s->y_width, 2, yuv_rec_file);
src16 += s->y_stride;
} while (--h);
src16 = CONVERT_TO_SHORTPTR(s->u_buffer);
h = s->uv_height;
do {
fwrite(src16, s->uv_width, 2, yuv_rec_file);
src16 += s->uv_stride;
} while (--h);
src16 = CONVERT_TO_SHORTPTR(s->v_buffer);
h = s->uv_height;
do {
fwrite(src16, s->uv_width, 2, yuv_rec_file);
src16 += s->uv_stride;
} while (--h);
fflush(yuv_rec_file);
return;
}
#endif // CONFIG_VP9_HIGHBITDEPTH
do {
fwrite(src, s->y_width, 1, yuv_rec_file);
src += s->y_stride;
} while (--h);
src = s->u_buffer;
h = s->uv_height;
do {
fwrite(src, s->uv_width, 1, yuv_rec_file);
src += s->uv_stride;
} while (--h);
src = s->v_buffer;
h = s->uv_height;
do {
fwrite(src, s->uv_width, 1, yuv_rec_file);
src += s->uv_stride;
} while (--h);
[WIP] Add column-based tiling. This patch adds column-based tiling. The idea is to make each tile independently decodable (after reading the common frame header) and also independendly encodable (minus within-frame cost adjustments in the RD loop) to speed-up hardware & software en/decoders if they used multi-threading. Column-based tiling has the added advantage (over other tiling methods) that it minimizes realtime use-case latency, since all threads can start encoding data as soon as the first SB-row worth of data is available to the encoder. There is some test code that does random tile ordering in the decoder, to confirm that each tile is indeed independently decodable from other tiles in the same frame. At tile edges, all contexts assume default values (i.e. 0, 0 motion vector, no coefficients, DC intra4x4 mode), and motion vector search and ordering do not cross tiles in the same frame. t log Tile independence is not maintained between frames ATM, i.e. tile 0 of frame 1 is free to use motion vectors that point into any tile of frame 0. We support 1 (i.e. no tiling), 2 or 4 column-tiles. The loopfilter crosses tile boundaries. I discussed this briefly with Aki and he says that's OK. An in-loop loopfilter would need to do some sync between tile threads, but that shouldn't be a big issue. Resuls: with tiling disabled, we go up slightly because of improved edge use in the intra4x4 prediction. With 2 tiles, we lose about ~1% on derf, ~0.35% on HD and ~0.55% on STD/HD. With 4 tiles, we lose another ~1.5% on derf ~0.77% on HD and ~0.85% on STD/HD. Most of this loss is concentrated in the low-bitrate end of clips, and most of it is because of the loss of edges at tile boundaries and the resulting loss of intra predictors. TODO: - more tiles (perhaps allow row-based tiling also, and max. 8 tiles)? - maybe optionally (for EC purposes), motion vectors themselves should not cross tile edges, or we should emulate such borders as if they were off-frame, to limit error propagation to within one tile only. This doesn't have to be the default behaviour but could be an optional bitstream flag. Change-Id: I5951c3a0742a767b20bc9fb5af685d9892c2c96f
2013-02-01 18:35:28 +01:00
fflush(yuv_rec_file);
}
#endif
#if CONFIG_VP9_HIGHBITDEPTH
static void scale_and_extend_frame_nonnormative(const YV12_BUFFER_CONFIG *src,
YV12_BUFFER_CONFIG *dst,
int bd) {
#else
static void scale_and_extend_frame_nonnormative(const YV12_BUFFER_CONFIG *src,
YV12_BUFFER_CONFIG *dst) {
#endif // CONFIG_VP9_HIGHBITDEPTH
// TODO(dkovalev): replace YV12_BUFFER_CONFIG with vpx_image_t
int i;
const uint8_t *const srcs[3] = { src->y_buffer, src->u_buffer,
src->v_buffer };
const int src_strides[3] = { src->y_stride, src->uv_stride, src->uv_stride };
const int src_widths[3] = { src->y_crop_width, src->uv_crop_width,
src->uv_crop_width };
const int src_heights[3] = { src->y_crop_height, src->uv_crop_height,
src->uv_crop_height };
uint8_t *const dsts[3] = { dst->y_buffer, dst->u_buffer, dst->v_buffer };
const int dst_strides[3] = { dst->y_stride, dst->uv_stride, dst->uv_stride };
const int dst_widths[3] = { dst->y_crop_width, dst->uv_crop_width,
dst->uv_crop_width };
const int dst_heights[3] = { dst->y_crop_height, dst->uv_crop_height,
dst->uv_crop_height };
for (i = 0; i < MAX_MB_PLANE; ++i) {
#if CONFIG_VP9_HIGHBITDEPTH
if (src->flags & YV12_FLAG_HIGHBITDEPTH) {
vp9_highbd_resize_plane(srcs[i], src_heights[i], src_widths[i],
src_strides[i], dsts[i], dst_heights[i],
dst_widths[i], dst_strides[i], bd);
} else {
vp9_resize_plane(srcs[i], src_heights[i], src_widths[i], src_strides[i],
dsts[i], dst_heights[i], dst_widths[i], dst_strides[i]);
}
#else
vp9_resize_plane(srcs[i], src_heights[i], src_widths[i], src_strides[i],
dsts[i], dst_heights[i], dst_widths[i], dst_strides[i]);
#endif // CONFIG_VP9_HIGHBITDEPTH
}
vpx_extend_frame_borders(dst);
}
#if CONFIG_VP9_HIGHBITDEPTH
static void scale_and_extend_frame(const YV12_BUFFER_CONFIG *src,
YV12_BUFFER_CONFIG *dst, int bd) {
const int src_w = src->y_crop_width;
const int src_h = src->y_crop_height;
const int dst_w = dst->y_crop_width;
const int dst_h = dst->y_crop_height;
const uint8_t *const srcs[3] = { src->y_buffer, src->u_buffer,
src->v_buffer };
const int src_strides[3] = { src->y_stride, src->uv_stride, src->uv_stride };
uint8_t *const dsts[3] = { dst->y_buffer, dst->u_buffer, dst->v_buffer };
const int dst_strides[3] = { dst->y_stride, dst->uv_stride, dst->uv_stride };
const InterpKernel *const kernel = vp9_filter_kernels[EIGHTTAP];
int x, y, i;
for (i = 0; i < MAX_MB_PLANE; ++i) {
const int factor = (i == 0 || i == 3 ? 1 : 2);
const int src_stride = src_strides[i];
const int dst_stride = dst_strides[i];
for (y = 0; y < dst_h; y += 16) {
const int y_q4 = y * (16 / factor) * src_h / dst_h;
for (x = 0; x < dst_w; x += 16) {
const int x_q4 = x * (16 / factor) * src_w / dst_w;
const uint8_t *src_ptr = srcs[i] +
(y / factor) * src_h / dst_h * src_stride +
(x / factor) * src_w / dst_w;
uint8_t *dst_ptr = dsts[i] + (y / factor) * dst_stride + (x / factor);
if (src->flags & YV12_FLAG_HIGHBITDEPTH) {
vpx_highbd_convolve8(src_ptr, src_stride, dst_ptr, dst_stride,
kernel[x_q4 & 0xf], 16 * src_w / dst_w,
kernel[y_q4 & 0xf], 16 * src_h / dst_h,
16 / factor, 16 / factor, bd);
} else {
vpx_scaled_2d(src_ptr, src_stride, dst_ptr, dst_stride,
kernel[x_q4 & 0xf], 16 * src_w / dst_w,
kernel[y_q4 & 0xf], 16 * src_h / dst_h, 16 / factor,
16 / factor);
}
}
}
}
vpx_extend_frame_borders(dst);
}
#else
void vp9_scale_and_extend_frame_c(const YV12_BUFFER_CONFIG *src,
YV12_BUFFER_CONFIG *dst) {
const int src_w = src->y_crop_width;
const int src_h = src->y_crop_height;
const int dst_w = dst->y_crop_width;
const int dst_h = dst->y_crop_height;
const uint8_t *const srcs[3] = { src->y_buffer, src->u_buffer,
src->v_buffer };
const int src_strides[3] = { src->y_stride, src->uv_stride, src->uv_stride };
uint8_t *const dsts[3] = { dst->y_buffer, dst->u_buffer, dst->v_buffer };
const int dst_strides[3] = { dst->y_stride, dst->uv_stride, dst->uv_stride };
const InterpKernel *const kernel = vp9_filter_kernels[EIGHTTAP];
int x, y, i;
for (i = 0; i < MAX_MB_PLANE; ++i) {
const int factor = (i == 0 || i == 3 ? 1 : 2);
const int src_stride = src_strides[i];
const int dst_stride = dst_strides[i];
for (y = 0; y < dst_h; y += 16) {
const int y_q4 = y * (16 / factor) * src_h / dst_h;
for (x = 0; x < dst_w; x += 16) {
const int x_q4 = x * (16 / factor) * src_w / dst_w;
const uint8_t *src_ptr = srcs[i] +
(y / factor) * src_h / dst_h * src_stride +
(x / factor) * src_w / dst_w;
uint8_t *dst_ptr = dsts[i] + (y / factor) * dst_stride + (x / factor);
vpx_scaled_2d(src_ptr, src_stride, dst_ptr, dst_stride,
kernel[x_q4 & 0xf], 16 * src_w / dst_w,
kernel[y_q4 & 0xf], 16 * src_h / dst_h, 16 / factor,
16 / factor);
}
}
}
vpx_extend_frame_borders(dst);
}
#endif // CONFIG_VP9_HIGHBITDEPTH
static int scale_down(VP9_COMP *cpi, int q) {
RATE_CONTROL *const rc = &cpi->rc;
GF_GROUP *const gf_group = &cpi->twopass.gf_group;
int scale = 0;
assert(frame_is_kf_gf_arf(cpi));
if (rc->frame_size_selector == UNSCALED &&
q >= rc->rf_level_maxq[gf_group->rf_level[gf_group->index]]) {
const int max_size_thresh =
(int)(rate_thresh_mult[SCALE_STEP1] *
VPXMAX(rc->this_frame_target, rc->avg_frame_bandwidth));
scale = rc->projected_frame_size > max_size_thresh ? 1 : 0;
}
return scale;
}
static int big_rate_miss(VP9_COMP *cpi, int high_limit, int low_limit) {
const RATE_CONTROL *const rc = &cpi->rc;
return (rc->projected_frame_size > ((high_limit * 3) / 2)) ||
(rc->projected_frame_size < (low_limit / 2));
}
// test in two pass for the first
static int two_pass_first_group_inter(VP9_COMP *cpi) {
TWO_PASS *const twopass = &cpi->twopass;
GF_GROUP *const gf_group = &twopass->gf_group;
if ((cpi->oxcf.pass == 2) &&
(gf_group->index == gf_group->first_inter_index)) {
return 1;
} else {
return 0;
}
}
// Function to test for conditions that indicate we should loop
// back and recode a frame.
static int recode_loop_test(VP9_COMP *cpi, int high_limit, int low_limit, int q,
int maxq, int minq) {
const RATE_CONTROL *const rc = &cpi->rc;
const VP9EncoderConfig *const oxcf = &cpi->oxcf;
const int frame_is_kfgfarf = frame_is_kf_gf_arf(cpi);
int force_recode = 0;
if ((rc->projected_frame_size >= rc->max_frame_bandwidth) ||
big_rate_miss(cpi, high_limit, low_limit) ||
(cpi->sf.recode_loop == ALLOW_RECODE) ||
(two_pass_first_group_inter(cpi) &&
(cpi->sf.recode_loop == ALLOW_RECODE_FIRST)) ||
(frame_is_kfgfarf && (cpi->sf.recode_loop >= ALLOW_RECODE_KFARFGF))) {
if (frame_is_kfgfarf && (oxcf->resize_mode == RESIZE_DYNAMIC) &&
scale_down(cpi, q)) {
// Code this group at a lower resolution.
cpi->resize_pending = 1;
return 1;
}
// TODO(agrange) high_limit could be greater than the scale-down threshold.
if ((rc->projected_frame_size > high_limit && q < maxq) ||
(rc->projected_frame_size < low_limit && q > minq)) {
force_recode = 1;
} else if (cpi->oxcf.rc_mode == VPX_CQ) {
// Deal with frame undershoot and whether or not we are
// below the automatically set cq level.
if (q > oxcf->cq_level &&
rc->projected_frame_size < ((rc->this_frame_target * 7) >> 3)) {
force_recode = 1;
}
}
}
return force_recode;
}
void vp9_update_reference_frames(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
Try again to merge branch 'frame-parallel' into master branch. In frame parallel decode, libvpx decoder decodes several frames on all cpus in parallel fashion. If not being flushed, it will only return frame when all the cpus are busy. If getting flushed, it will return all the frames in the decoder. Compare with current serial decode mode in which libvpx decoder is idle between decode calls, libvpx decoder is busy between decode calls. Current frame parallel decode will only speed up the decoding for frame parallel encoded videos. For non frame parallel encoded videos, frame parallel decode is slower than serial decode due to lack of loopfilter worker thread. There are still some known issues that need to be addressed. For example: decode frame parallel videos with segmentation enabled is not right sometimes. * frame-parallel: Add error handling for frame parallel decode and unit test for that. Fix a bug in frame parallel decode and add a unit test for that. Add two test vectors to test frame parallel decode. Add key frame seeking to webmdec and webm_video_source. Implement frame parallel decode for VP9. Increase the thread test range to cover 5, 6, 7, 8 threads. Fix a bug in adding frame parallel unit test. Add VP9 frame-parallel unit test. Manually pick "Make the api behavior conform to api spec." from master branch. Move vp9_dec_build_inter_predictors_* to decoder folder. Add segmentation map array for current and last frame segmentation. Include the right header for VP9 worker thread. Move vp9_thread.* to common. ctrl_get_reference does not need user_priv. Seperate the frame buffers from VP9 encoder/decoder structure. Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:""" Conflicts: test/codec_factory.h test/decode_test_driver.cc test/decode_test_driver.h test/invalid_file_test.cc test/test-data.sha1 test/test.mk test/test_vectors.cc vp8/vp8_dx_iface.c vp9/common/vp9_alloccommon.c vp9/common/vp9_entropymode.c vp9/common/vp9_loopfilter_thread.c vp9/common/vp9_loopfilter_thread.h vp9/common/vp9_mvref_common.c vp9/common/vp9_onyxc_int.h vp9/common/vp9_reconinter.c vp9/decoder/vp9_decodeframe.c vp9/decoder/vp9_decodeframe.h vp9/decoder/vp9_decodemv.c vp9/decoder/vp9_decoder.c vp9/decoder/vp9_decoder.h vp9/encoder/vp9_encoder.c vp9/encoder/vp9_pickmode.c vp9/encoder/vp9_rdopt.c vp9/vp9_cx_iface.c vp9/vp9_dx_iface.c This reverts commit a18da9760a74d9ce6fb9f875706dc639c95402f5. Change-Id: I361442ffec1586d036ea2e0ee97ce4f077585f02
2015-01-27 21:26:28 +01:00
BufferPool *const pool = cm->buffer_pool;
// At this point the new frame has been encoded.
// If any buffer copy / swapping is signaled it should be done here.
if (cm->frame_type == KEY_FRAME) {
ref_cnt_fb(pool->frame_bufs, &cm->ref_frame_map[cpi->gld_fb_idx],
cm->new_fb_idx);
ref_cnt_fb(pool->frame_bufs, &cm->ref_frame_map[cpi->alt_fb_idx],
cm->new_fb_idx);
} else if (vp9_preserve_existing_gf(cpi)) {
// We have decided to preserve the previously existing golden frame as our
// new ARF frame. However, in the short term in function
// vp9_get_refresh_mask() we left it in the GF slot and, if
// we're updating the GF with the current decoded frame, we save it to the
// ARF slot instead.
// We now have to update the ARF with the current frame and swap gld_fb_idx
// and alt_fb_idx so that, overall, we've stored the old GF in the new ARF
// slot and, if we're updating the GF, the current frame becomes the new GF.
int tmp;
ref_cnt_fb(pool->frame_bufs, &cm->ref_frame_map[cpi->alt_fb_idx],
cm->new_fb_idx);
tmp = cpi->alt_fb_idx;
cpi->alt_fb_idx = cpi->gld_fb_idx;
cpi->gld_fb_idx = tmp;
if (is_two_pass_svc(cpi)) {
cpi->svc.layer_context[0].gold_ref_idx = cpi->gld_fb_idx;
cpi->svc.layer_context[0].alt_ref_idx = cpi->alt_fb_idx;
}
} else { /* For non key/golden frames */
if (cpi->refresh_alt_ref_frame) {
int arf_idx = cpi->alt_fb_idx;
if ((cpi->oxcf.pass == 2) && cpi->multi_arf_allowed) {
const GF_GROUP *const gf_group = &cpi->twopass.gf_group;
arf_idx = gf_group->arf_update_idx[gf_group->index];
}
ref_cnt_fb(pool->frame_bufs, &cm->ref_frame_map[arf_idx], cm->new_fb_idx);
memcpy(cpi->interp_filter_selected[ALTREF_FRAME],
cpi->interp_filter_selected[0],
sizeof(cpi->interp_filter_selected[0]));
}
if (cpi->refresh_golden_frame) {
ref_cnt_fb(pool->frame_bufs, &cm->ref_frame_map[cpi->gld_fb_idx],
cm->new_fb_idx);
if (!cpi->rc.is_src_frame_alt_ref)
memcpy(cpi->interp_filter_selected[GOLDEN_FRAME],
cpi->interp_filter_selected[0],
sizeof(cpi->interp_filter_selected[0]));
else
memcpy(cpi->interp_filter_selected[GOLDEN_FRAME],
cpi->interp_filter_selected[ALTREF_FRAME],
sizeof(cpi->interp_filter_selected[ALTREF_FRAME]));
}
}
if (cpi->refresh_last_frame) {
ref_cnt_fb(pool->frame_bufs, &cm->ref_frame_map[cpi->lst_fb_idx],
cm->new_fb_idx);
if (!cpi->rc.is_src_frame_alt_ref)
memcpy(cpi->interp_filter_selected[LAST_FRAME],
cpi->interp_filter_selected[0],
sizeof(cpi->interp_filter_selected[0]));
}
#if CONFIG_VP9_TEMPORAL_DENOISING
if (cpi->oxcf.noise_sensitivity > 0 &&
cpi->denoiser.denoising_level > kDenLowLow) {
vp9_denoiser_update_frame_info(
&cpi->denoiser, *cpi->Source, cpi->common.frame_type,
cpi->refresh_alt_ref_frame, cpi->refresh_golden_frame,
cpi->refresh_last_frame, cpi->resize_pending);
}
#endif
if (is_one_pass_cbr_svc(cpi)) {
// Keep track of frame index for each reference frame.
SVC *const svc = &cpi->svc;
if (cm->frame_type == KEY_FRAME) {
svc->ref_frame_index[cpi->lst_fb_idx] = svc->current_superframe;
svc->ref_frame_index[cpi->gld_fb_idx] = svc->current_superframe;
svc->ref_frame_index[cpi->alt_fb_idx] = svc->current_superframe;
} else {
if (cpi->refresh_last_frame)
svc->ref_frame_index[cpi->lst_fb_idx] = svc->current_superframe;
if (cpi->refresh_golden_frame)
svc->ref_frame_index[cpi->gld_fb_idx] = svc->current_superframe;
if (cpi->refresh_alt_ref_frame)
svc->ref_frame_index[cpi->alt_fb_idx] = svc->current_superframe;
}
}
}
static void loopfilter_frame(VP9_COMP *cpi, VP9_COMMON *cm) {
MACROBLOCKD *xd = &cpi->td.mb.e_mbd;
struct loopfilter *lf = &cm->lf;
if (xd->lossless) {
lf->filter_level = 0;
lf->last_filt_level = 0;
} else {
struct vpx_usec_timer timer;
vpx_clear_system_state();
vpx_usec_timer_start(&timer);
if (!cpi->rc.is_src_frame_alt_ref) {
if ((cpi->common.frame_type == KEY_FRAME) &&
(!cpi->rc.this_key_frame_forced)) {
lf->last_filt_level = 0;
}
vp9_pick_filter_level(cpi->Source, cpi, cpi->sf.lpf_pick);
lf->last_filt_level = lf->filter_level;
} else {
lf->filter_level = 0;
}
vpx_usec_timer_mark(&timer);
cpi->time_pick_lpf += vpx_usec_timer_elapsed(&timer);
}
if (lf->filter_level > 0) {
vp9_build_mask_frame(cm, lf->filter_level, 0);
if (cpi->num_workers > 1)
vp9_loop_filter_frame_mt(cm->frame_to_show, cm, xd->plane,
lf->filter_level, 0, 0, cpi->workers,
cpi->num_workers, &cpi->lf_row_sync);
else
vp9_loop_filter_frame(cm->frame_to_show, cm, xd, lf->filter_level, 0, 0);
}
vpx_extend_frame_inner_borders(cm->frame_to_show);
}
static INLINE void alloc_frame_mvs(VP9_COMMON *const cm, int buffer_idx) {
RefCntBuffer *const new_fb_ptr = &cm->buffer_pool->frame_bufs[buffer_idx];
if (new_fb_ptr->mvs == NULL || new_fb_ptr->mi_rows < cm->mi_rows ||
new_fb_ptr->mi_cols < cm->mi_cols) {
vpx_free(new_fb_ptr->mvs);
CHECK_MEM_ERROR(cm, new_fb_ptr->mvs,
(MV_REF *)vpx_calloc(cm->mi_rows * cm->mi_cols,
sizeof(*new_fb_ptr->mvs)));
new_fb_ptr->mi_rows = cm->mi_rows;
new_fb_ptr->mi_cols = cm->mi_cols;
}
}
void vp9_scale_references(VP9_COMP *cpi) {
VP9_COMMON *cm = &cpi->common;
MV_REFERENCE_FRAME ref_frame;
const VP9_REFFRAME ref_mask[3] = { VP9_LAST_FLAG, VP9_GOLD_FLAG,
VP9_ALT_FLAG };
for (ref_frame = LAST_FRAME; ref_frame <= ALTREF_FRAME; ++ref_frame) {
// Need to convert from VP9_REFFRAME to index into ref_mask (subtract 1).
if (cpi->ref_frame_flags & ref_mask[ref_frame - 1]) {
BufferPool *const pool = cm->buffer_pool;
const YV12_BUFFER_CONFIG *const ref =
get_ref_frame_buffer(cpi, ref_frame);
if (ref == NULL) {
cpi->scaled_ref_idx[ref_frame - 1] = INVALID_IDX;
continue;
}
#if CONFIG_VP9_HIGHBITDEPTH
if (ref->y_crop_width != cm->width || ref->y_crop_height != cm->height) {
RefCntBuffer *new_fb_ptr = NULL;
int force_scaling = 0;
int new_fb = cpi->scaled_ref_idx[ref_frame - 1];
if (new_fb == INVALID_IDX) {
new_fb = get_free_fb(cm);
force_scaling = 1;
}
if (new_fb == INVALID_IDX) return;
new_fb_ptr = &pool->frame_bufs[new_fb];
if (force_scaling || new_fb_ptr->buf.y_crop_width != cm->width ||
new_fb_ptr->buf.y_crop_height != cm->height) {
if (vpx_realloc_frame_buffer(&new_fb_ptr->buf, cm->width, cm->height,
cm->subsampling_x, cm->subsampling_y,
cm->use_highbitdepth,
VP9_ENC_BORDER_IN_PIXELS,
cm->byte_alignment, NULL, NULL, NULL))
vpx_internal_error(&cm->error, VPX_CODEC_MEM_ERROR,
"Failed to allocate frame buffer");
scale_and_extend_frame(ref, &new_fb_ptr->buf, (int)cm->bit_depth);
cpi->scaled_ref_idx[ref_frame - 1] = new_fb;
alloc_frame_mvs(cm, new_fb);
}
#else
if (ref->y_crop_width != cm->width || ref->y_crop_height != cm->height) {
RefCntBuffer *new_fb_ptr = NULL;
int force_scaling = 0;
int new_fb = cpi->scaled_ref_idx[ref_frame - 1];
if (new_fb == INVALID_IDX) {
new_fb = get_free_fb(cm);
force_scaling = 1;
}
if (new_fb == INVALID_IDX) return;
new_fb_ptr = &pool->frame_bufs[new_fb];
if (force_scaling || new_fb_ptr->buf.y_crop_width != cm->width ||
new_fb_ptr->buf.y_crop_height != cm->height) {
if (vpx_realloc_frame_buffer(&new_fb_ptr->buf, cm->width, cm->height,
cm->subsampling_x, cm->subsampling_y,
VP9_ENC_BORDER_IN_PIXELS,
cm->byte_alignment, NULL, NULL, NULL))
vpx_internal_error(&cm->error, VPX_CODEC_MEM_ERROR,
"Failed to allocate frame buffer");
vp9_scale_and_extend_frame(ref, &new_fb_ptr->buf);
cpi->scaled_ref_idx[ref_frame - 1] = new_fb;
alloc_frame_mvs(cm, new_fb);
}
#endif // CONFIG_VP9_HIGHBITDEPTH
} else {
int buf_idx;
RefCntBuffer *buf = NULL;
if (cpi->oxcf.pass == 0 && !cpi->use_svc) {
// Check for release of scaled reference.
buf_idx = cpi->scaled_ref_idx[ref_frame - 1];
buf = (buf_idx != INVALID_IDX) ? &pool->frame_bufs[buf_idx] : NULL;
if (buf != NULL) {
--buf->ref_count;
cpi->scaled_ref_idx[ref_frame - 1] = INVALID_IDX;
}
}
buf_idx = get_ref_frame_buf_idx(cpi, ref_frame);
buf = &pool->frame_bufs[buf_idx];
buf->buf.y_crop_width = ref->y_crop_width;
buf->buf.y_crop_height = ref->y_crop_height;
cpi->scaled_ref_idx[ref_frame - 1] = buf_idx;
++buf->ref_count;
}
} else {
if (cpi->oxcf.pass != 0 || cpi->use_svc)
cpi->scaled_ref_idx[ref_frame - 1] = INVALID_IDX;
}
}
}
static void release_scaled_references(VP9_COMP *cpi) {
VP9_COMMON *cm = &cpi->common;
int i;
if (cpi->oxcf.pass == 0 && !cpi->use_svc) {
// Only release scaled references under certain conditions:
// if reference will be updated, or if scaled reference has same resolution.
int refresh[3];
refresh[0] = (cpi->refresh_last_frame) ? 1 : 0;
refresh[1] = (cpi->refresh_golden_frame) ? 1 : 0;
refresh[2] = (cpi->refresh_alt_ref_frame) ? 1 : 0;
for (i = LAST_FRAME; i <= ALTREF_FRAME; ++i) {
const int idx = cpi->scaled_ref_idx[i - 1];
RefCntBuffer *const buf =
idx != INVALID_IDX ? &cm->buffer_pool->frame_bufs[idx] : NULL;
const YV12_BUFFER_CONFIG *const ref = get_ref_frame_buffer(cpi, i);
if (buf != NULL &&
(refresh[i - 1] || (buf->buf.y_crop_width == ref->y_crop_width &&
buf->buf.y_crop_height == ref->y_crop_height))) {
--buf->ref_count;
cpi->scaled_ref_idx[i - 1] = INVALID_IDX;
}
}
} else {
for (i = 0; i < MAX_REF_FRAMES; ++i) {
const int idx = cpi->scaled_ref_idx[i];
RefCntBuffer *const buf =
idx != INVALID_IDX ? &cm->buffer_pool->frame_bufs[idx] : NULL;
if (buf != NULL) {
--buf->ref_count;
cpi->scaled_ref_idx[i] = INVALID_IDX;
}
}
}
}
static void full_to_model_count(unsigned int *model_count,
unsigned int *full_count) {
int n;
model_count[ZERO_TOKEN] = full_count[ZERO_TOKEN];
model_count[ONE_TOKEN] = full_count[ONE_TOKEN];
model_count[TWO_TOKEN] = full_count[TWO_TOKEN];
for (n = THREE_TOKEN; n < EOB_TOKEN; ++n)
model_count[TWO_TOKEN] += full_count[n];
model_count[EOB_MODEL_TOKEN] = full_count[EOB_TOKEN];
}
static void full_to_model_counts(vp9_coeff_count_model *model_count,
vp9_coeff_count *full_count) {
int i, j, k, l;
for (i = 0; i < PLANE_TYPES; ++i)
for (j = 0; j < REF_TYPES; ++j)
for (k = 0; k < COEF_BANDS; ++k)
for (l = 0; l < BAND_COEFF_CONTEXTS(k); ++l)
full_to_model_count(model_count[i][j][k][l], full_count[i][j][k][l]);
}
#if 0 && CONFIG_INTERNAL_STATS
static void output_frame_level_debug_stats(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
FILE *const f = fopen("tmp.stt", cm->current_video_frame ? "a" : "w");
int64_t recon_err;
vpx_clear_system_state();
#if CONFIG_VP9_HIGHBITDEPTH
if (cm->use_highbitdepth) {
recon_err = vpx_highbd_get_y_sse(cpi->Source, get_frame_new_buffer(cm));
} else {
recon_err = vpx_get_y_sse(cpi->Source, get_frame_new_buffer(cm));
}
#else
recon_err = vpx_get_y_sse(cpi->Source, get_frame_new_buffer(cm));
#endif // CONFIG_VP9_HIGHBITDEPTH
if (cpi->twopass.total_left_stats.coded_error != 0.0) {
double dc_quant_devisor;
#if CONFIG_VP9_HIGHBITDEPTH
switch (cm->bit_depth) {
case VPX_BITS_8:
dc_quant_devisor = 4.0;
break;
case VPX_BITS_10:
dc_quant_devisor = 16.0;
break;
case VPX_BITS_12:
dc_quant_devisor = 64.0;
break;
default:
assert(0 && "bit_depth must be VPX_BITS_8, VPX_BITS_10 or VPX_BITS_12");
break;
}
#else
dc_quant_devisor = 4.0;
#endif
Changes to exhaustive motion search. This change alters the nature and use of exhaustive motion search. Firstly any exhaustive search is preceded by a normal step search. The exhaustive search is only carried out if the distortion resulting from the step search is above a threshold value. Secondly the simple +/- 64 exhaustive search is replaced by a multi stage mesh based search where each stage has a range and step/interval size. Subsequent stages use the best position from the previous stage as the center of the search but use a reduced range and interval size. For example: stage 1: Range +/- 64 interval 4 stage 2: Range +/- 32 interval 2 stage 3: Range +/- 15 interval 1 This process, especially when it follows on from a normal step search, has shown itself to be almost as effective as a full range exhaustive search with step 1 but greatly lowers the computational complexity such that it can be used in some cases for speeds 0-2. This patch also removes a double exhaustive search for sub 8x8 blocks which also contained a bug (the two searches used different distortion metrics). For best quality in my test animation sequence this patch has almost no impact on quality but improves encode speed by more than 5X. Restricted use in good quality speeds 0-2 yields significant quality gains on the animation test of 0.2 - 0.5 db with only a small impact on encode speed. On most clips though the quality gain and speed impact are small. Change-Id: Id22967a840e996e1db273f6ac4ff03f4f52d49aa
2015-10-14 11:38:49 +02:00
fprintf(f, "%10u %dx%d %10d %10d %d %d %10d %10d %10d %10d"
"%10"PRId64" %10"PRId64" %5d %5d %10"PRId64" "
"%10"PRId64" %10"PRId64" %10d "
"%7.2lf %7.2lf %7.2lf %7.2lf %7.2lf"
"%6d %6d %5d %5d %5d "
"%10"PRId64" %10.3lf"
"%10lf %8u %10"PRId64" %10d %10d %10d %10d %10d\n",
cpi->common.current_video_frame,
cm->width, cm->height,
Changes to exhaustive motion search. This change alters the nature and use of exhaustive motion search. Firstly any exhaustive search is preceded by a normal step search. The exhaustive search is only carried out if the distortion resulting from the step search is above a threshold value. Secondly the simple +/- 64 exhaustive search is replaced by a multi stage mesh based search where each stage has a range and step/interval size. Subsequent stages use the best position from the previous stage as the center of the search but use a reduced range and interval size. For example: stage 1: Range +/- 64 interval 4 stage 2: Range +/- 32 interval 2 stage 3: Range +/- 15 interval 1 This process, especially when it follows on from a normal step search, has shown itself to be almost as effective as a full range exhaustive search with step 1 but greatly lowers the computational complexity such that it can be used in some cases for speeds 0-2. This patch also removes a double exhaustive search for sub 8x8 blocks which also contained a bug (the two searches used different distortion metrics). For best quality in my test animation sequence this patch has almost no impact on quality but improves encode speed by more than 5X. Restricted use in good quality speeds 0-2 yields significant quality gains on the animation test of 0.2 - 0.5 db with only a small impact on encode speed. On most clips though the quality gain and speed impact are small. Change-Id: Id22967a840e996e1db273f6ac4ff03f4f52d49aa
2015-10-14 11:38:49 +02:00
cpi->td.rd_counts.m_search_count,
cpi->td.rd_counts.ex_search_count,
cpi->rc.source_alt_ref_pending,
cpi->rc.source_alt_ref_active,
cpi->rc.this_frame_target,
cpi->rc.projected_frame_size,
cpi->rc.projected_frame_size / cpi->common.MBs,
(cpi->rc.projected_frame_size - cpi->rc.this_frame_target),
cpi->rc.vbr_bits_off_target,
cpi->rc.vbr_bits_off_target_fast,
cpi->twopass.extend_minq,
cpi->twopass.extend_minq_fast,
cpi->rc.total_target_vs_actual,
(cpi->rc.starting_buffer_level - cpi->rc.bits_off_target),
cpi->rc.total_actual_bits, cm->base_qindex,
vp9_convert_qindex_to_q(cm->base_qindex, cm->bit_depth),
(double)vp9_dc_quant(cm->base_qindex, 0, cm->bit_depth) /
dc_quant_devisor,
vp9_convert_qindex_to_q(cpi->twopass.active_worst_quality,
cm->bit_depth),
cpi->rc.avg_q,
vp9_convert_qindex_to_q(cpi->oxcf.cq_level, cm->bit_depth),
cpi->refresh_last_frame, cpi->refresh_golden_frame,
cpi->refresh_alt_ref_frame, cm->frame_type, cpi->rc.gfu_boost,
cpi->twopass.bits_left,
cpi->twopass.total_left_stats.coded_error,
cpi->twopass.bits_left /
(1 + cpi->twopass.total_left_stats.coded_error),
cpi->tot_recode_hits, recon_err, cpi->rc.kf_boost,
cpi->twopass.kf_zeromotion_pct,
cpi->twopass.fr_content_type,
cm->lf.filter_level,
cm->seg.aq_av_offset);
}
fclose(f);
if (0) {
FILE *const fmodes = fopen("Modes.stt", "a");
int i;
2010-05-18 17:58:33 +02:00
fprintf(fmodes, "%6d:%1d:%1d:%1d ", cpi->common.current_video_frame,
cm->frame_type, cpi->refresh_golden_frame,
cpi->refresh_alt_ref_frame);
2010-05-18 17:58:33 +02:00
for (i = 0; i < MAX_MODES; ++i)
fprintf(fmodes, "%5d ", cpi->mode_chosen_counts[i]);
2011-10-05 12:26:00 +02:00
fprintf(fmodes, "\n");
2010-05-18 17:58:33 +02:00
fclose(fmodes);
}
}
#endif
2010-05-18 17:58:33 +02:00
static void set_mv_search_params(VP9_COMP *cpi) {
const VP9_COMMON *const cm = &cpi->common;
const unsigned int max_mv_def = VPXMIN(cm->width, cm->height);
// Default based on max resolution.
cpi->mv_step_param = vp9_init_search_range(max_mv_def);
if (cpi->sf.mv.auto_mv_step_size) {
if (frame_is_intra_only(cm)) {
// Initialize max_mv_magnitude for use in the first INTER frame
// after a key/intra-only frame.
cpi->max_mv_magnitude = max_mv_def;
} else {
if (cm->show_frame) {
// Allow mv_steps to correspond to twice the max mv magnitude found
// in the previous frame, capped by the default max_mv_magnitude based
// on resolution.
cpi->mv_step_param = vp9_init_search_range(
VPXMIN(max_mv_def, 2 * cpi->max_mv_magnitude));
}
cpi->max_mv_magnitude = 0;
}
}
}
static void set_size_independent_vars(VP9_COMP *cpi) {
vp9_set_speed_features_framesize_independent(cpi);
vp9_set_rd_speed_thresholds(cpi);
vp9_set_rd_speed_thresholds_sub8x8(cpi);
cpi->common.interp_filter = cpi->sf.default_interp_filter;
}
static void set_size_dependent_vars(VP9_COMP *cpi, int *q, int *bottom_index,
int *top_index) {
VP9_COMMON *const cm = &cpi->common;
const VP9EncoderConfig *const oxcf = &cpi->oxcf;
// Setup variables that depend on the dimensions of the frame.
vp9_set_speed_features_framesize_dependent(cpi);
// Decide q and q bounds.
*q = vp9_rc_pick_q_and_bounds(cpi, bottom_index, top_index);
if (!frame_is_intra_only(cm)) {
vp9_set_high_precision_mv(cpi, (*q) < HIGH_PRECISION_MV_QTHRESH);
}
// Configure experimental use of segmentation for enhanced coding of
// static regions if indicated.
// Only allowed in the second pass of a two pass encode, as it requires
// lagged coding, and if the relevant speed feature flag is set.
if (oxcf->pass == 2 && cpi->sf.static_segmentation)
configure_static_seg_features(cpi);
#if CONFIG_VP9_POSTPROC && !(CONFIG_VP9_TEMPORAL_DENOISING)
if (oxcf->noise_sensitivity > 0) {
int l = 0;
switch (oxcf->noise_sensitivity) {
case 1: l = 20; break;
case 2: l = 40; break;
case 3: l = 60; break;
case 4:
case 5: l = 100; break;
case 6: l = 150; break;
}
if (!cpi->common.postproc_state.limits) {
cpi->common.postproc_state.limits = vpx_calloc(
cpi->common.width, sizeof(*cpi->common.postproc_state.limits));
}
vp9_denoise(cpi->Source, cpi->Source, l, cpi->common.postproc_state.limits);
}
#endif // CONFIG_VP9_POSTPROC
}
#if CONFIG_VP9_TEMPORAL_DENOISING
static void setup_denoiser_buffer(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
if (cpi->oxcf.noise_sensitivity > 0 &&
!cpi->denoiser.frame_buffer_initialized) {
if (vp9_denoiser_alloc(&cpi->denoiser, cm->width, cm->height,
cm->subsampling_x, cm->subsampling_y,
#if CONFIG_VP9_HIGHBITDEPTH
cm->use_highbitdepth,
#endif
VP9_ENC_BORDER_IN_PIXELS))
vpx_internal_error(&cm->error, VPX_CODEC_MEM_ERROR,
"Failed to allocate denoiser");
}
}
#endif
static void init_motion_estimation(VP9_COMP *cpi) {
int y_stride = cpi->scaled_source.y_stride;
if (cpi->sf.mv.search_method == NSTEP) {
vp9_init3smotion_compensation(&cpi->ss_cfg, y_stride);
} else if (cpi->sf.mv.search_method == DIAMOND) {
vp9_init_dsmotion_compensation(&cpi->ss_cfg, y_stride);
}
}
static void set_frame_size(VP9_COMP *cpi) {
int ref_frame;
VP9_COMMON *const cm = &cpi->common;
VP9EncoderConfig *const oxcf = &cpi->oxcf;
MACROBLOCKD *const xd = &cpi->td.mb.e_mbd;
if (oxcf->pass == 2 && oxcf->rc_mode == VPX_VBR &&
((oxcf->resize_mode == RESIZE_FIXED && cm->current_video_frame == 0) ||
(oxcf->resize_mode == RESIZE_DYNAMIC && cpi->resize_pending))) {
calculate_coded_size(cpi, &oxcf->scaled_frame_width,
&oxcf->scaled_frame_height);
// There has been a change in frame size.
vp9_set_size_literal(cpi, oxcf->scaled_frame_width,
oxcf->scaled_frame_height);
}
if (oxcf->pass == 0 && oxcf->rc_mode == VPX_CBR && !cpi->use_svc &&
oxcf->resize_mode == RESIZE_DYNAMIC && cpi->resize_pending != 0) {
oxcf->scaled_frame_width =
(oxcf->width * cpi->resize_scale_num) / cpi->resize_scale_den;
oxcf->scaled_frame_height =
(oxcf->height * cpi->resize_scale_num) / cpi->resize_scale_den;
// There has been a change in frame size.
vp9_set_size_literal(cpi, oxcf->scaled_frame_width,
oxcf->scaled_frame_height);
// TODO(agrange) Scale cpi->max_mv_magnitude if frame-size has changed.
set_mv_search_params(cpi);
vp9_noise_estimate_init(&cpi->noise_estimate, cm->width, cm->height);
#if CONFIG_VP9_TEMPORAL_DENOISING
// Reset the denoiser on the resized frame.
if (cpi->oxcf.noise_sensitivity > 0) {
vp9_denoiser_free(&(cpi->denoiser));
setup_denoiser_buffer(cpi);
// Dynamic resize is only triggered for non-SVC, so we can force
// golden frame update here as temporary fix to denoiser.
cpi->refresh_golden_frame = 1;
}
#endif
}
if ((oxcf->pass == 2) &&
(!cpi->use_svc || (is_two_pass_svc(cpi) &&
cpi->svc.encode_empty_frame_state != ENCODING))) {
vp9_set_target_rate(cpi);
}
alloc_frame_mvs(cm, cm->new_fb_idx);
// Reset the frame pointers to the current frame size.
if (vpx_realloc_frame_buffer(get_frame_new_buffer(cm), cm->width, cm->height,
cm->subsampling_x, cm->subsampling_y,
#if CONFIG_VP9_HIGHBITDEPTH
cm->use_highbitdepth,
#endif
VP9_ENC_BORDER_IN_PIXELS, cm->byte_alignment,
NULL, NULL, NULL))
vpx_internal_error(&cm->error, VPX_CODEC_MEM_ERROR,
"Failed to allocate frame buffer");
alloc_util_frame_buffers(cpi);
init_motion_estimation(cpi);
for (ref_frame = LAST_FRAME; ref_frame <= ALTREF_FRAME; ++ref_frame) {
RefBuffer *const ref_buf = &cm->frame_refs[ref_frame - 1];
const int buf_idx = get_ref_frame_buf_idx(cpi, ref_frame);
ref_buf->idx = buf_idx;
if (buf_idx != INVALID_IDX) {
YV12_BUFFER_CONFIG *const buf = &cm->buffer_pool->frame_bufs[buf_idx].buf;
ref_buf->buf = buf;
#if CONFIG_VP9_HIGHBITDEPTH
vp9_setup_scale_factors_for_frame(
&ref_buf->sf, buf->y_crop_width, buf->y_crop_height, cm->width,
cm->height, (buf->flags & YV12_FLAG_HIGHBITDEPTH) ? 1 : 0);
#else
vp9_setup_scale_factors_for_frame(&ref_buf->sf, buf->y_crop_width,
buf->y_crop_height, cm->width,
cm->height);
#endif // CONFIG_VP9_HIGHBITDEPTH
if (vp9_is_scaled(&ref_buf->sf)) vpx_extend_frame_borders(buf);
} else {
ref_buf->buf = NULL;
}
}
set_ref_ptrs(cm, xd, LAST_FRAME, LAST_FRAME);
}
static void encode_without_recode_loop(VP9_COMP *cpi, size_t *size,
uint8_t *dest) {
VP9_COMMON *const cm = &cpi->common;
int q = 0, bottom_index = 0, top_index = 0; // Dummy variables.
vpx_clear_system_state();
set_frame_size(cpi);
if (is_one_pass_cbr_svc(cpi) &&
cpi->un_scaled_source->y_width == cm->width << 2 &&
cpi->un_scaled_source->y_height == cm->height << 2 &&
cpi->svc.scaled_temp.y_width == cm->width << 1 &&
cpi->svc.scaled_temp.y_height == cm->height << 1) {
// For svc, if it is a 1/4x1/4 downscaling, do a two-stage scaling to take
// advantage of the 1:2 optimized scaler. In the process, the 1/2x1/2
// result will be saved in scaled_temp and might be used later.
cpi->Source = vp9_svc_twostage_scale(
cm, cpi->un_scaled_source, &cpi->scaled_source, &cpi->svc.scaled_temp);
cpi->svc.scaled_one_half = 1;
} else if (is_one_pass_cbr_svc(cpi) &&
cpi->un_scaled_source->y_width == cm->width << 1 &&
cpi->un_scaled_source->y_height == cm->height << 1 &&
cpi->svc.scaled_one_half) {
// If the spatial layer is 1/2x1/2 and the scaling is already done in the
// two-stage scaling, use the result directly.
cpi->Source = &cpi->svc.scaled_temp;
cpi->svc.scaled_one_half = 0;
} else {
cpi->Source = vp9_scale_if_required(
cm, cpi->un_scaled_source, &cpi->scaled_source, (cpi->oxcf.pass == 0));
}
// Unfiltered raw source used in metrics calculation if the source
// has been filtered.
if (is_psnr_calc_enabled(cpi)) {
#ifdef ENABLE_KF_DENOISE
if (is_spatial_denoise_enabled(cpi)) {
cpi->raw_source_frame =
vp9_scale_if_required(cm, &cpi->raw_unscaled_source,
&cpi->raw_scaled_source, (cpi->oxcf.pass == 0));
} else {
cpi->raw_source_frame = cpi->Source;
}
#else
cpi->raw_source_frame = cpi->Source;
#endif
}
// Avoid scaling last_source unless its needed.
// Last source is needed if vp9_avg_source_sad() is used, or if
// partition_search_type == SOURCE_VAR_BASED_PARTITION, or if noise
// estimation is enabled.
if (cpi->unscaled_last_source != NULL &&
(cpi->oxcf.content == VP9E_CONTENT_SCREEN ||
(cpi->oxcf.pass == 0 && cpi->oxcf.rc_mode == VPX_VBR &&
cpi->oxcf.mode == REALTIME && cpi->oxcf.speed >= 5) ||
cpi->sf.partition_search_type == SOURCE_VAR_BASED_PARTITION ||
cpi->noise_estimate.enabled))
cpi->Last_Source =
vp9_scale_if_required(cm, cpi->unscaled_last_source,
&cpi->scaled_last_source, (cpi->oxcf.pass == 0));
if (cm->frame_type == KEY_FRAME || cpi->resize_pending != 0) {
memset(cpi->consec_zero_mv, 0,
cm->mi_rows * cm->mi_cols * sizeof(*cpi->consec_zero_mv));
}
vp9_update_noise_estimate(cpi);
if (cpi->oxcf.pass == 0 && cpi->oxcf.mode == REALTIME &&
cpi->oxcf.speed >= 5 && cpi->resize_state == 0 &&
(cpi->oxcf.content == VP9E_CONTENT_SCREEN ||
cpi->oxcf.rc_mode == VPX_VBR))
vp9_avg_source_sad(cpi);
// For 1 pass SVC, since only ZEROMV is allowed for upsampled reference
// frame (i.e, svc->force_zero_mode_spatial_ref = 0), we can avoid this
// frame-level upsampling.
if (frame_is_intra_only(cm) == 0 && !is_one_pass_cbr_svc(cpi)) {
vp9_scale_references(cpi);
}
set_size_independent_vars(cpi);
set_size_dependent_vars(cpi, &q, &bottom_index, &top_index);
if (cpi->oxcf.speed >= 5 && cpi->oxcf.pass == 0 &&
cpi->oxcf.rc_mode == VPX_CBR &&
cpi->oxcf.content != VP9E_CONTENT_SCREEN &&
cpi->oxcf.aq_mode == CYCLIC_REFRESH_AQ) {
cpi->use_skin_detection = 1;
}
vp9_set_quantizer(cm, q);
vp9_set_variance_partition_thresholds(cpi, q);
setup_frame(cpi);
suppress_active_map(cpi);
// Variance adaptive and in frame q adjustment experiments are mutually
// exclusive.
if (cpi->oxcf.aq_mode == VARIANCE_AQ) {
vp9_vaq_frame_setup(cpi);
} else if (cpi->oxcf.aq_mode == EQUATOR360_AQ) {
vp9_360aq_frame_setup(cpi);
} else if (cpi->oxcf.aq_mode == COMPLEXITY_AQ) {
vp9_setup_in_frame_q_adj(cpi);
} else if (cpi->oxcf.aq_mode == CYCLIC_REFRESH_AQ) {
vp9_cyclic_refresh_setup(cpi);
} else if (cpi->oxcf.aq_mode == LOOKAHEAD_AQ) {
// it may be pretty bad for rate-control,
// and I should handle it somehow
vp9_alt_ref_aq_setup_map(cpi->alt_ref_aq, cpi);
}
apply_active_map(cpi);
vp9_encode_frame(cpi);
// Check if we should drop this frame because of high overshoot.
// Only for frames where high temporal-source SAD is detected.
if (cpi->oxcf.pass == 0 && cpi->oxcf.rc_mode == VPX_CBR &&
cpi->resize_state == 0 && cm->frame_type != KEY_FRAME &&
cpi->oxcf.content == VP9E_CONTENT_SCREEN &&
cpi->rc.high_source_sad == 1) {
int frame_size = 0;
// Get an estimate of the encoded frame size.
save_coding_context(cpi);
vp9_pack_bitstream(cpi, dest, size);
restore_coding_context(cpi);
frame_size = (int)(*size) << 3;
// Check if encoded frame will overshoot too much, and if so, set the q and
// adjust some rate control parameters, and return to re-encode the frame.
if (vp9_encodedframe_overshoot(cpi, frame_size, &q)) {
vpx_clear_system_state();
vp9_set_quantizer(cm, q);
vp9_set_variance_partition_thresholds(cpi, q);
suppress_active_map(cpi);
// Turn-off cyclic refresh for re-encoded frame.
if (cpi->oxcf.aq_mode == CYCLIC_REFRESH_AQ) {
unsigned char *const seg_map = cpi->segmentation_map;
memset(seg_map, 0, cm->mi_rows * cm->mi_cols);
vp9_disable_segmentation(&cm->seg);
}
apply_active_map(cpi);
vp9_encode_frame(cpi);
}
}
// Update some stats from cyclic refresh, and check if we should not update
// golden reference, for non-SVC 1 pass CBR.
if (cpi->oxcf.aq_mode == CYCLIC_REFRESH_AQ && cm->frame_type != KEY_FRAME &&
!cpi->use_svc && cpi->ext_refresh_frame_flags_pending == 0 &&
(cpi->oxcf.pass == 0 && cpi->oxcf.rc_mode == VPX_CBR))
vp9_cyclic_refresh_check_golden_update(cpi);
// Update the skip mb flag probabilities based on the distribution
// seen in the last encoder iteration.
// update_base_skip_probs(cpi);
vpx_clear_system_state();
}
static void encode_with_recode_loop(VP9_COMP *cpi, size_t *size,
uint8_t *dest) {
VP9_COMMON *const cm = &cpi->common;
RATE_CONTROL *const rc = &cpi->rc;
int bottom_index, top_index;
int loop_count = 0;
int loop_at_this_size = 0;
int loop = 0;
int overshoot_seen = 0;
int undershoot_seen = 0;
int frame_over_shoot_limit;
int frame_under_shoot_limit;
int q = 0, q_low = 0, q_high = 0;
set_size_independent_vars(cpi);
do {
vpx_clear_system_state();
2010-05-18 17:58:33 +02:00
set_frame_size(cpi);
if (loop_count == 0 || cpi->resize_pending != 0) {
set_size_dependent_vars(cpi, &q, &bottom_index, &top_index);
// TODO(agrange) Scale cpi->max_mv_magnitude if frame-size has changed.
set_mv_search_params(cpi);
// Reset the loop state for new frame size.
overshoot_seen = 0;
undershoot_seen = 0;
// Reconfiguration for change in frame size has concluded.
cpi->resize_pending = 0;
q_low = bottom_index;
q_high = top_index;
loop_at_this_size = 0;
}
// Decide frame size bounds first time through.
if (loop_count == 0) {
vp9_rc_compute_frame_size_bounds(cpi, rc->this_frame_target,
&frame_under_shoot_limit,
&frame_over_shoot_limit);
}
cpi->Source = vp9_scale_if_required(
cm, cpi->un_scaled_source, &cpi->scaled_source, (cpi->oxcf.pass == 0));
// Unfiltered raw source used in metrics calculation if the source
// has been filtered.
if (is_psnr_calc_enabled(cpi)) {
#ifdef ENABLE_KF_DENOISE
if (is_spatial_denoise_enabled(cpi)) {
cpi->raw_source_frame = vp9_scale_if_required(
cm, &cpi->raw_unscaled_source, &cpi->raw_scaled_source,
(cpi->oxcf.pass == 0));
} else {
cpi->raw_source_frame = cpi->Source;
}
#else
cpi->raw_source_frame = cpi->Source;
#endif
}
if (cpi->unscaled_last_source != NULL)
cpi->Last_Source = vp9_scale_if_required(cm, cpi->unscaled_last_source,
&cpi->scaled_last_source,
(cpi->oxcf.pass == 0));
if (frame_is_intra_only(cm) == 0) {
if (loop_count > 0) {
release_scaled_references(cpi);
}
vp9_scale_references(cpi);
}
vp9_set_quantizer(cm, q);
if (loop_count == 0) setup_frame(cpi);
// Variance adaptive and in frame q adjustment experiments are mutually
// exclusive.
if (cpi->oxcf.aq_mode == VARIANCE_AQ) {
vp9_vaq_frame_setup(cpi);
} else if (cpi->oxcf.aq_mode == EQUATOR360_AQ) {
vp9_360aq_frame_setup(cpi);
} else if (cpi->oxcf.aq_mode == COMPLEXITY_AQ) {
vp9_setup_in_frame_q_adj(cpi);
} else if (cpi->oxcf.aq_mode == LOOKAHEAD_AQ) {
vp9_alt_ref_aq_setup_map(cpi->alt_ref_aq, cpi);
}
vp9_encode_frame(cpi);
// Update the skip mb flag probabilities based on the distribution
// seen in the last encoder iteration.
// update_base_skip_probs(cpi);
vpx_clear_system_state();
// Dummy pack of the bitstream using up to date stats to get an
// accurate estimate of output frame size to determine if we need
// to recode.
if (cpi->sf.recode_loop >= ALLOW_RECODE_KFARFGF) {
save_coding_context(cpi);
if (!cpi->sf.use_nonrd_pick_mode) vp9_pack_bitstream(cpi, dest, size);
rc->projected_frame_size = (int)(*size) << 3;
restore_coding_context(cpi);
if (frame_over_shoot_limit == 0) frame_over_shoot_limit = 1;
}
if (cpi->oxcf.rc_mode == VPX_Q) {
loop = 0;
} else {
if ((cm->frame_type == KEY_FRAME) && rc->this_key_frame_forced &&
(rc->projected_frame_size < rc->max_frame_bandwidth)) {
int last_q = q;
int64_t kf_err;
int64_t high_err_target = cpi->ambient_err;
int64_t low_err_target = cpi->ambient_err >> 1;
#if CONFIG_VP9_HIGHBITDEPTH
if (cm->use_highbitdepth) {
kf_err = vpx_highbd_get_y_sse(cpi->Source, get_frame_new_buffer(cm));
} else {
kf_err = vpx_get_y_sse(cpi->Source, get_frame_new_buffer(cm));
}
#else
kf_err = vpx_get_y_sse(cpi->Source, get_frame_new_buffer(cm));
#endif // CONFIG_VP9_HIGHBITDEPTH
// Prevent possible divide by zero error below for perfect KF
kf_err += !kf_err;
// The key frame is not good enough or we can afford
// to make it better without undue risk of popping.
if ((kf_err > high_err_target &&
rc->projected_frame_size <= frame_over_shoot_limit) ||
(kf_err > low_err_target &&
rc->projected_frame_size <= frame_under_shoot_limit)) {
// Lower q_high
q_high = q > q_low ? q - 1 : q_low;
// Adjust Q
q = (int)((q * high_err_target) / kf_err);
q = VPXMIN(q, (q_high + q_low) >> 1);
} else if (kf_err < low_err_target &&
rc->projected_frame_size >= frame_under_shoot_limit) {
// The key frame is much better than the previous frame
// Raise q_low
q_low = q < q_high ? q + 1 : q_high;
// Adjust Q
q = (int)((q * low_err_target) / kf_err);
q = VPXMIN(q, (q_high + q_low + 1) >> 1);
}
// Clamp Q to upper and lower limits:
q = clamp(q, q_low, q_high);
loop = q != last_q;
} else if (recode_loop_test(cpi, frame_over_shoot_limit,
frame_under_shoot_limit, q,
VPXMAX(q_high, top_index), bottom_index)) {
// Is the projected frame size out of range and are we allowed
// to attempt to recode.
int last_q = q;
int retries = 0;
if (cpi->resize_pending == 1) {
// Change in frame size so go back around the recode loop.
cpi->rc.frame_size_selector =
SCALE_STEP1 - cpi->rc.frame_size_selector;
cpi->rc.next_frame_size_selector = cpi->rc.frame_size_selector;
#if CONFIG_INTERNAL_STATS
++cpi->tot_recode_hits;
#endif
++loop_count;
loop = 1;
continue;
}
// Frame size out of permitted range:
// Update correction factor & compute new Q to try...
// Frame is too large
if (rc->projected_frame_size > rc->this_frame_target) {
// Special case if the projected size is > the max allowed.
if (rc->projected_frame_size >= rc->max_frame_bandwidth)
q_high = rc->worst_quality;
// Raise Qlow as to at least the current value
q_low = q < q_high ? q + 1 : q_high;
if (undershoot_seen || loop_at_this_size > 1) {
// Update rate_correction_factor unless
vp9_rc_update_rate_correction_factors(cpi);
q = (q_high + q_low + 1) / 2;
} else {
// Update rate_correction_factor unless
vp9_rc_update_rate_correction_factors(cpi);
q = vp9_rc_regulate_q(cpi, rc->this_frame_target, bottom_index,
VPXMAX(q_high, top_index));
while (q < q_low && retries < 10) {
vp9_rc_update_rate_correction_factors(cpi);
q = vp9_rc_regulate_q(cpi, rc->this_frame_target, bottom_index,
VPXMAX(q_high, top_index));
retries++;
}
}
overshoot_seen = 1;
} else {
// Frame is too small
q_high = q > q_low ? q - 1 : q_low;
if (overshoot_seen || loop_at_this_size > 1) {
vp9_rc_update_rate_correction_factors(cpi);
q = (q_high + q_low) / 2;
} else {
vp9_rc_update_rate_correction_factors(cpi);
q = vp9_rc_regulate_q(cpi, rc->this_frame_target, bottom_index,
top_index);
// Special case reset for qlow for constrained quality.
// This should only trigger where there is very substantial
// undershoot on a frame and the auto cq level is above
// the user passsed in value.
if (cpi->oxcf.rc_mode == VPX_CQ && q < q_low) {
q_low = q;
}
while (q > q_high && retries < 10) {
vp9_rc_update_rate_correction_factors(cpi);
q = vp9_rc_regulate_q(cpi, rc->this_frame_target, bottom_index,
top_index);
retries++;
}
}
undershoot_seen = 1;
}
// Clamp Q to upper and lower limits:
q = clamp(q, q_low, q_high);
loop = (q != last_q);
} else {
loop = 0;
}
}
// Special case for overlay frame.
if (rc->is_src_frame_alt_ref &&
rc->projected_frame_size < rc->max_frame_bandwidth)
loop = 0;
if (loop) {
++loop_count;
++loop_at_this_size;
#if CONFIG_INTERNAL_STATS
++cpi->tot_recode_hits;
#endif
}
} while (loop);
}
static int get_ref_frame_flags(const VP9_COMP *cpi) {
const int *const map = cpi->common.ref_frame_map;
const int gold_is_last = map[cpi->gld_fb_idx] == map[cpi->lst_fb_idx];
const int alt_is_last = map[cpi->alt_fb_idx] == map[cpi->lst_fb_idx];
const int gold_is_alt = map[cpi->gld_fb_idx] == map[cpi->alt_fb_idx];
int flags = VP9_ALT_FLAG | VP9_GOLD_FLAG | VP9_LAST_FLAG;
if (gold_is_last) flags &= ~VP9_GOLD_FLAG;
if (cpi->rc.frames_till_gf_update_due == INT_MAX &&
(cpi->svc.number_temporal_layers == 1 &&
cpi->svc.number_spatial_layers == 1))
flags &= ~VP9_GOLD_FLAG;
if (alt_is_last) flags &= ~VP9_ALT_FLAG;
if (gold_is_alt) flags &= ~VP9_ALT_FLAG;
return flags;
}
static void set_ext_overrides(VP9_COMP *cpi) {
// Overrides the defaults with the externally supplied values with
// vp9_update_reference() and vp9_update_entropy() calls
// Note: The overrides are valid only for the next frame passed
// to encode_frame_to_data_rate() function
if (cpi->ext_refresh_frame_context_pending) {
cpi->common.refresh_frame_context = cpi->ext_refresh_frame_context;
cpi->ext_refresh_frame_context_pending = 0;
}
if (cpi->ext_refresh_frame_flags_pending) {
cpi->refresh_last_frame = cpi->ext_refresh_last_frame;
cpi->refresh_golden_frame = cpi->ext_refresh_golden_frame;
cpi->refresh_alt_ref_frame = cpi->ext_refresh_alt_ref_frame;
}
}
YV12_BUFFER_CONFIG *vp9_svc_twostage_scale(VP9_COMMON *cm,
YV12_BUFFER_CONFIG *unscaled,
YV12_BUFFER_CONFIG *scaled,
YV12_BUFFER_CONFIG *scaled_temp) {
if (cm->mi_cols * MI_SIZE != unscaled->y_width ||
cm->mi_rows * MI_SIZE != unscaled->y_height) {
#if CONFIG_VP9_HIGHBITDEPTH
scale_and_extend_frame(unscaled, scaled_temp, (int)cm->bit_depth);
scale_and_extend_frame(scaled_temp, scaled, (int)cm->bit_depth);
#else
vp9_scale_and_extend_frame(unscaled, scaled_temp);
vp9_scale_and_extend_frame(scaled_temp, scaled);
#endif // CONFIG_VP9_HIGHBITDEPTH
return scaled;
} else {
return unscaled;
}
}
YV12_BUFFER_CONFIG *vp9_scale_if_required(VP9_COMMON *cm,
YV12_BUFFER_CONFIG *unscaled,
YV12_BUFFER_CONFIG *scaled,
int use_normative_scaler) {
if (cm->mi_cols * MI_SIZE != unscaled->y_width ||
cm->mi_rows * MI_SIZE != unscaled->y_height) {
#if CONFIG_VP9_HIGHBITDEPTH
if (use_normative_scaler && unscaled->y_width <= (scaled->y_width << 1) &&
unscaled->y_height <= (scaled->y_height << 1))
scale_and_extend_frame(unscaled, scaled, (int)cm->bit_depth);
else
scale_and_extend_frame_nonnormative(unscaled, scaled, (int)cm->bit_depth);
#else
if (use_normative_scaler && unscaled->y_width <= (scaled->y_width << 1) &&
unscaled->y_height <= (scaled->y_height << 1))
vp9_scale_and_extend_frame(unscaled, scaled);
else
scale_and_extend_frame_nonnormative(unscaled, scaled);
#endif // CONFIG_VP9_HIGHBITDEPTH
return scaled;
} else {
return unscaled;
}
}
static void set_arf_sign_bias(VP9_COMP *cpi) {
VP9_COMMON *const cm = &cpi->common;
int arf_sign_bias;
if ((cpi->oxcf.pass == 2) && cpi->multi_arf_allowed) {
const GF_GROUP *const gf_group = &cpi->twopass.gf_group;
arf_sign_bias = cpi->rc.source_alt_ref_active &&
(!cpi->refresh_alt_ref_frame ||
(gf_group->rf_level[gf_group->index] == GF_ARF_LOW));
} else {
arf_sign_bias =
(cpi->rc.source_alt_ref_active && !cpi->refresh_alt_ref_frame);
}
cm->ref_frame_sign_bias[ALTREF_FRAME] = arf_sign_bias;
}
static int setup_interp_filter_search_mask(VP9_COMP *cpi) {
INTERP_FILTER ifilter;
int ref_total[MAX_REF_FRAMES] = { 0 };
MV_REFERENCE_FRAME ref;
int mask = 0;
if (cpi->common.last_frame_type == KEY_FRAME || cpi->refresh_alt_ref_frame)
return mask;
for (ref = LAST_FRAME; ref <= ALTREF_FRAME; ++ref)
for (ifilter = EIGHTTAP; ifilter <= EIGHTTAP_SHARP; ++ifilter)
ref_total[ref] += cpi->interp_filter_selected[ref][ifilter];
for (ifilter = EIGHTTAP; ifilter <= EIGHTTAP_SHARP; ++ifilter) {
if ((ref_total[LAST_FRAME] &&
cpi->interp_filter_selected[LAST_FRAME][ifilter] == 0) &&
(ref_total[GOLDEN_FRAME] == 0 ||
cpi->interp_filter_selected[GOLDEN_FRAME][ifilter] * 50 <
ref_total[GOLDEN_FRAME]) &&
(ref_total[ALTREF_FRAME] == 0 ||
cpi->interp_filter_selected[ALTREF_FRAME][ifilter] * 50 <
ref_total[ALTREF_FRAME]))
mask |= 1 << ifilter;
}
return mask;
}
#ifdef ENABLE_KF_DENOISE
// Baseline Kernal weights for denoise
static uint8_t dn_kernal_3[9] = { 1, 2, 1, 2, 4, 2, 1, 2, 1 };
static uint8_t dn_kernal_5[25] = { 1, 1, 1, 1, 1, 1, 1, 2, 1, 1, 1, 2, 4,
2, 1, 1, 1, 2, 1, 1, 1, 1, 1, 1, 1 };
static INLINE void add_denoise_point(int centre_val, int data_val, int thresh,
uint8_t point_weight, int *sum_val,
int *sum_weight) {
if (abs(centre_val - data_val) <= thresh) {
*sum_weight += point_weight;
*sum_val += (int)data_val * (int)point_weight;
}
}
static void spatial_denoise_point(uint8_t *src_ptr, const int stride,
const int strength) {
int sum_weight = 0;
int sum_val = 0;
int thresh = strength;
int kernal_size = 5;
int half_k_size = 2;
int i, j;
int max_diff = 0;
uint8_t *tmp_ptr;
uint8_t *kernal_ptr;
// Find the maximum deviation from the source point in the locale.
tmp_ptr = src_ptr - (stride * (half_k_size + 1)) - (half_k_size + 1);
for (i = 0; i < kernal_size + 2; ++i) {
for (j = 0; j < kernal_size + 2; ++j) {
max_diff = VPXMAX(max_diff, abs((int)*src_ptr - (int)tmp_ptr[j]));
}
tmp_ptr += stride;
}
// Select the kernal size.
if (max_diff > (strength + (strength >> 1))) {
kernal_size = 3;
half_k_size = 1;
thresh = thresh >> 1;
}
kernal_ptr = (kernal_size == 3) ? dn_kernal_3 : dn_kernal_5;
// Apply the kernal
tmp_ptr = src_ptr - (stride * half_k_size) - half_k_size;
for (i = 0; i < kernal_size; ++i) {
for (j = 0; j < kernal_size; ++j) {
add_denoise_point((int)*src_ptr, (int)tmp_ptr[j], thresh, *kernal_ptr,
&sum_val, &sum_weight);
++kernal_ptr;
}
tmp_ptr += stride;
}
// Update the source value with the new filtered value
*src_ptr = (uint8_t)((sum_val + (sum_weight >> 1)) / sum_weight);
}
#if CONFIG_VP9_HIGHBITDEPTH
static void highbd_spatial_denoise_point(uint16_t *src_ptr, const int stride,
const int strength) {
int sum_weight = 0;
int sum_val = 0;
int thresh = strength;
int kernal_size = 5;
int half_k_size = 2;
int i, j;
int max_diff = 0;
uint16_t *tmp_ptr;
uint8_t *kernal_ptr;
// Find the maximum deviation from the source point in the locale.
tmp_ptr = src_ptr - (stride * (half_k_size + 1)) - (half_k_size + 1);
for (i = 0; i < kernal_size + 2; ++i) {
for (j = 0; j < kernal_size + 2; ++j) {
max_diff = VPXMAX(max_diff, abs((int)src_ptr - (int)tmp_ptr[j]));
}
tmp_ptr += stride;
}
// Select the kernal size.
if (max_diff > (strength + (strength >> 1))) {
kernal_size = 3;
half_k_size = 1;
thresh = thresh >> 1;
}
kernal_ptr = (kernal_size == 3) ? dn_kernal_3 : dn_kernal_5;
// Apply the kernal
tmp_ptr = src_ptr - (stride * half_k_size) - half_k_size;
for (i = 0; i < kernal_size; ++i) {
for (j = 0; j < kernal_size; ++j) {
add_denoise_point((int)*src_ptr, (int)tmp_ptr[j], thresh, *kernal_ptr,
&sum_val, &sum_weight);
++kernal_ptr;
}
tmp_ptr += stride;
}
// Update the source value with the new filtered value
*src_ptr = (uint16_t)((sum_val + (sum_weight >> 1)) / sum_weight);
}
#endif // CONFIG_VP9_HIGHBITDEPTH
// Apply thresholded spatial noise supression to a given buffer.
static void spatial_denoise_buffer(VP9_COMP *cpi, uint8_t *buffer,
const int stride, const int width,
const int height, const int strength) {
VP9_COMMON *const cm = &cpi->common;
uint8_t *src_ptr = buffer;
int row;
int col;
for (row = 0; row < height; ++row) {
for (col = 0; col < width; ++col) {
#if CONFIG_VP9_HIGHBITDEPTH
if (cm->use_highbitdepth)
highbd_spatial_denoise_point(CONVERT_TO_SHORTPTR(&src_ptr[col]), stride,
strength);
else
spatial_denoise_point(&src_ptr[col], stride, strength);
#else
spatial_denoise_point(&src_ptr[col], stride, strength);
#endif // CONFIG_VP9_HIGHBITDEPTH
}
src_ptr += stride;
}
}
// Apply thresholded spatial noise supression to source.
static void spatial_denoise_frame(VP9_COMP *cpi) {
YV12_BUFFER_CONFIG *src = cpi->Source;
const VP9EncoderConfig *const oxcf = &cpi->oxcf;
TWO_PASS *const twopass = &cpi->twopass;
VP9_COMMON *const cm = &cpi->common;
// Base the filter strength on the current active max Q.
const int q = (int)(vp9_convert_qindex_to_q(twopass->active_worst_quality,
cm->bit_depth));
int strength =
VPXMAX(oxcf->arnr_strength >> 2, VPXMIN(oxcf->arnr_strength, (q >> 4)));
// Denoise each of Y,U and V buffers.
spatial_denoise_buffer(cpi, src->y_buffer, src->y_stride, src->y_width,
src->y_height, strength);
strength += (strength >> 1);
spatial_denoise_buffer(cpi, src->u_buffer, src->uv_stride, src->uv_width,
src->uv_height, strength << 1);
spatial_denoise_buffer(cpi, src->v_buffer, src->uv_stride, src->uv_width,
src->uv_height, strength << 1);
}
#endif // ENABLE_KF_DENOISE
static void vp9_try_disable_lookahead_aq(VP9_COMP *cpi, size_t *size,
uint8_t *dest) {
if (cpi->common.seg.enabled)
if (ALT_REF_AQ_PROTECT_GAIN) {
size_t nsize = *size;
int overhead;
// TODO(yuryg): optimize this, as
// we don't really need to repack
save_coding_context(cpi);
vp9_disable_segmentation(&cpi->common.seg);
vp9_pack_bitstream(cpi, dest, &nsize);
restore_coding_context(cpi);
overhead = (int)*size - (int)nsize;
if (vp9_alt_ref_aq_disable_if(cpi->alt_ref_aq, overhead, (int)*size))
vp9_encode_frame(cpi);
else
vp9_enable_segmentation(&cpi->common.seg);
}
}
static void encode_frame_to_data_rate(VP9_COMP *cpi, size_t *size,
uint8_t *dest,
unsigned int *frame_flags) {
VP9_COMMON *const cm = &cpi->common;
const VP9EncoderConfig *const oxcf = &cpi->oxcf;
struct segmentation *const seg = &cm->seg;
TX_SIZE t;
set_ext_overrides(cpi);
vpx_clear_system_state();
#ifdef ENABLE_KF_DENOISE
// Spatial denoise of key frame.
if (is_spatial_denoise_enabled(cpi)) spatial_denoise_frame(cpi);
#endif
// Set the arf sign bias for this frame.
set_arf_sign_bias(cpi);
// Set default state for segment based loop filter update flags.
cm->lf.mode_ref_delta_update = 0;
if (cpi->oxcf.pass == 2 && cpi->sf.adaptive_interp_filter_search)
cpi->sf.interp_filter_search_mask = setup_interp_filter_search_mask(cpi);
// Set various flags etc to special state if it is a key frame.
if (frame_is_intra_only(cm)) {
// Reset the loop filter deltas and segmentation map.
vp9_reset_segment_features(&cm->seg);
// If segmentation is enabled force a map update for key frames.
if (seg->enabled) {
seg->update_map = 1;
seg->update_data = 1;
}
// The alternate reference frame cannot be active for a key frame.
cpi->rc.source_alt_ref_active = 0;
cm->error_resilient_mode = oxcf->error_resilient_mode;
cm->frame_parallel_decoding_mode = oxcf->frame_parallel_decoding_mode;
// By default, encoder assumes decoder can use prev_mi.
if (cm->error_resilient_mode) {
cm->frame_parallel_decoding_mode = 1;
cm->reset_frame_context = 0;
cm->refresh_frame_context = 0;
} else if (cm->intra_only) {
// Only reset the current context.
cm->reset_frame_context = 2;
}
}
if (is_two_pass_svc(cpi) && cm->error_resilient_mode == 0) {
// Use context 0 for intra only empty frame, but the last frame context
// for other empty frames.
if (cpi->svc.encode_empty_frame_state == ENCODING) {
if (cpi->svc.encode_intra_empty_frame != 0)
cm->frame_context_idx = 0;
else
cm->frame_context_idx = FRAME_CONTEXTS - 1;
} else {
cm->frame_context_idx =
cpi->svc.spatial_layer_id * cpi->svc.number_temporal_layers +
cpi->svc.temporal_layer_id;
}
cm->frame_parallel_decoding_mode = oxcf->frame_parallel_decoding_mode;
// The probs will be updated based on the frame type of its previous
// frame if frame_parallel_decoding_mode is 0. The type may vary for
// the frame after a key frame in base layer since we may drop enhancement
// layers. So set frame_parallel_decoding_mode to 1 in this case.
if (cm->frame_parallel_decoding_mode == 0) {
if (cpi->svc.number_temporal_layers == 1) {
if (cpi->svc.spatial_layer_id == 0 &&
cpi->svc.layer_context[0].last_frame_type == KEY_FRAME)
cm->frame_parallel_decoding_mode = 1;
} else if (cpi->svc.spatial_layer_id == 0) {
// Find the 2nd frame in temporal base layer and 1st frame in temporal
// enhancement layers from the key frame.
int i;
for (i = 0; i < cpi->svc.number_temporal_layers; ++i) {
if (cpi->svc.layer_context[0].frames_from_key_frame == 1 << i) {
cm->frame_parallel_decoding_mode = 1;
break;
}
}
}
}
}
// For 1 pass CBR, check if we are dropping this frame.
// For spatial layers, for now only check for frame-dropping on first spatial
// layer, and if decision is to drop, we drop whole super-frame.
if (oxcf->pass == 0 && oxcf->rc_mode == VPX_CBR &&
cm->frame_type != KEY_FRAME) {
if (vp9_rc_drop_frame(cpi) ||
(is_one_pass_cbr_svc(cpi) && cpi->svc.rc_drop_superframe == 1)) {
vp9_rc_postencode_update_drop_frame(cpi);
++cm->current_video_frame;
cpi->ext_refresh_frame_flags_pending = 0;
cpi->svc.rc_drop_superframe = 1;
// TODO(marpan): Advancing the svc counters on dropped frames can break
// the referencing scheme for the fixed svc patterns defined in
// vp9_one_pass_cbr_svc_start_layer(). Look into fixing this issue, but
// for now, don't advance the svc frame counters on dropped frame.
// if (cpi->use_svc)
// vp9_inc_frame_in_layer(cpi);
return;
}
}
vpx_clear_system_state();
#if CONFIG_INTERNAL_STATS
memset(cpi->mode_chosen_counts, 0,
MAX_MODES * sizeof(*cpi->mode_chosen_counts));
#endif
if (cpi->sf.recode_loop == DISALLOW_RECODE) {
encode_without_recode_loop(cpi, size, dest);
} else {
encode_with_recode_loop(cpi, size, dest);
}
// Disable segmentation if it decrease rate/distortion ratio
if (cpi->oxcf.aq_mode == LOOKAHEAD_AQ)
vp9_try_disable_lookahead_aq(cpi, size, dest);
#if CONFIG_VP9_TEMPORAL_DENOISING
#ifdef OUTPUT_YUV_DENOISED
if (oxcf->noise_sensitivity > 0) {
vp9_write_yuv_frame_420(&cpi->denoiser.running_avg_y[INTRA_FRAME],
yuv_denoised_file);
}
#endif
#endif
#ifdef OUTPUT_YUV_SKINMAP
if (cpi->common.current_video_frame > 1) {
vp9_compute_skin_map(cpi, yuv_skinmap_file);
}
#endif
// Special case code to reduce pulsing when key frames are forced at a
// fixed interval. Note the reconstruction error if it is the frame before
// the force key frame
if (cpi->rc.next_key_frame_forced && cpi->rc.frames_to_key == 1) {
#if CONFIG_VP9_HIGHBITDEPTH
if (cm->use_highbitdepth) {
cpi->ambient_err =
vpx_highbd_get_y_sse(cpi->Source, get_frame_new_buffer(cm));
} else {
cpi->ambient_err = vpx_get_y_sse(cpi->Source, get_frame_new_buffer(cm));
}
#else
cpi->ambient_err = vpx_get_y_sse(cpi->Source, get_frame_new_buffer(cm));
#endif // CONFIG_VP9_HIGHBITDEPTH
}
// If the encoder forced a KEY_FRAME decision
if (cm->frame_type == KEY_FRAME) cpi->refresh_last_frame = 1;
2010-05-18 17:58:33 +02:00
cm->frame_to_show = get_frame_new_buffer(cm);
cm->frame_to_show->color_space = cm->color_space;
cm->frame_to_show->color_range = cm->color_range;
cm->frame_to_show->render_width = cm->render_width;
cm->frame_to_show->render_height = cm->render_height;
// Pick the loop filter level for the frame.
loopfilter_frame(cpi, cm);
// build the bitstream
vp9_pack_bitstream(cpi, dest, size);
if (cm->seg.update_map) update_reference_segmentation_map(cpi);
if (frame_is_intra_only(cm) == 0) {
release_scaled_references(cpi);
}
vp9_update_reference_frames(cpi);
for (t = TX_4X4; t <= TX_32X32; t++)
full_to_model_counts(cpi->td.counts->coef[t],
cpi->td.rd_counts.coef_counts[t]);
if (!cm->error_resilient_mode && !cm->frame_parallel_decoding_mode)
vp9_adapt_coef_probs(cm);
if (!frame_is_intra_only(cm)) {
if (!cm->error_resilient_mode && !cm->frame_parallel_decoding_mode) {
vp9_adapt_mode_probs(cm);
vp9_adapt_mv_probs(cm, cm->allow_high_precision_mv);
}
}
cpi->ext_refresh_frame_flags_pending = 0;
if (cpi->refresh_golden_frame == 1)
cpi->frame_flags |= FRAMEFLAGS_GOLDEN;
else
cpi->frame_flags &= ~FRAMEFLAGS_GOLDEN;
2010-05-18 17:58:33 +02:00
if (cpi->refresh_alt_ref_frame == 1)
cpi->frame_flags |= FRAMEFLAGS_ALTREF;
else
cpi->frame_flags &= ~FRAMEFLAGS_ALTREF;
2010-05-18 17:58:33 +02:00
cpi->ref_frame_flags = get_ref_frame_flags(cpi);
2010-05-18 17:58:33 +02:00
cm->last_frame_type = cm->frame_type;
if (!(is_two_pass_svc(cpi) && cpi->svc.encode_empty_frame_state == ENCODING))
vp9_rc_postencode_update(cpi, *size);
2010-05-18 17:58:33 +02:00
#if 0
output_frame_level_debug_stats(cpi);
#endif
if (cm->frame_type == KEY_FRAME) {
// Tell the caller that the frame was coded as a key frame
*frame_flags = cpi->frame_flags | FRAMEFLAGS_KEY;
} else {
*frame_flags = cpi->frame_flags & ~FRAMEFLAGS_KEY;
}
2010-05-18 17:58:33 +02:00
// Clear the one shot update flags for segmentation map and mode/ref loop
// filter deltas.
cm->seg.update_map = 0;
cm->seg.update_data = 0;
cm->lf.mode_ref_delta_update = 0;
2010-05-18 17:58:33 +02:00
// keep track of the last coded dimensions
cm->last_width = cm->width;
cm->last_height = cm->height;
2010-05-18 17:58:33 +02:00
// reset to normal state now that we are done.
if (!cm->show_existing_frame) cm->last_show_frame = cm->show_frame;
if (cm->show_frame) {
vp9_swap_mi_and_prev_mi(cm);
// Don't increment frame counters if this was an altref buffer
// update not a real frame
++cm->current_video_frame;
if (cpi->use_svc) vp9_inc_frame_in_layer(cpi);
}
cm->prev_frame = cm->cur_frame;
if (cpi->use_svc)
cpi->svc.layer_context[cpi->svc.spatial_layer_id *
cpi->svc.number_temporal_layers +
cpi->svc.temporal_layer_id]
.last_frame_type = cm->frame_type;
cpi->force_update_segmentation = 0;
if (cpi->oxcf.aq_mode == LOOKAHEAD_AQ)
vp9_alt_ref_aq_unset_all(cpi->alt_ref_aq, cpi);
2010-05-18 17:58:33 +02:00
}
static void SvcEncode(VP9_COMP *cpi, size_t *size, uint8_t *dest,
unsigned int *frame_flags) {
vp9_rc_get_svc_params(cpi);
encode_frame_to_data_rate(cpi, size, dest, frame_flags);
}
static void Pass0Encode(VP9_COMP *cpi, size_t *size, uint8_t *dest,
unsigned int *frame_flags) {
if (cpi->oxcf.rc_mode == VPX_CBR) {
vp9_rc_get_one_pass_cbr_params(cpi);
} else {
vp9_rc_get_one_pass_vbr_params(cpi);
}
encode_frame_to_data_rate(cpi, size, dest, frame_flags);
}
static void Pass2Encode(VP9_COMP *cpi, size_t *size, uint8_t *dest,
unsigned int *frame_flags) {
cpi->allow_encode_breakout = ENCODE_BREAKOUT_ENABLED;
encode_frame_to_data_rate(cpi, size, dest, frame_flags);
if (!(is_two_pass_svc(cpi) && cpi->svc.encode_empty_frame_state == ENCODING))
vp9_twopass_postencode_update(cpi);
2010-05-18 17:58:33 +02:00
}
static void init_ref_frame_bufs(VP9_COMMON *cm) {
int i;
BufferPool *const pool = cm->buffer_pool;
cm->new_fb_idx = INVALID_IDX;
for (i = 0; i < REF_FRAMES; ++i) {
cm->ref_frame_map[i] = INVALID_IDX;
pool->frame_bufs[i].ref_count = 0;
}
}
static void check_initial_width(VP9_COMP *cpi,
#if CONFIG_VP9_HIGHBITDEPTH
int use_highbitdepth,
#endif
int subsampling_x, int subsampling_y) {
VP9_COMMON *const cm = &cpi->common;
if (!cpi->initial_width ||
#if CONFIG_VP9_HIGHBITDEPTH
cm->use_highbitdepth != use_highbitdepth ||
#endif
cm->subsampling_x != subsampling_x ||
cm->subsampling_y != subsampling_y) {
cm->subsampling_x = subsampling_x;
cm->subsampling_y = subsampling_y;
#if CONFIG_VP9_HIGHBITDEPTH
cm->use_highbitdepth = use_highbitdepth;
#endif
alloc_raw_frame_buffers(cpi);
init_ref_frame_bufs(cm);
alloc_util_frame_buffers(cpi);
init_motion_estimation(cpi); // TODO(agrange) This can be removed.
cpi->initial_width = cm->width;
cpi->initial_height = cm->height;
cpi->initial_mbs = cm->MBs;
}
}
int vp9_receive_raw_frame(VP9_COMP *cpi, vpx_enc_frame_flags_t frame_flags,
YV12_BUFFER_CONFIG *sd, int64_t time_stamp,
int64_t end_time) {
VP9_COMMON *const cm = &cpi->common;
struct vpx_usec_timer timer;
int res = 0;
const int subsampling_x = sd->subsampling_x;
const int subsampling_y = sd->subsampling_y;
#if CONFIG_VP9_HIGHBITDEPTH
const int use_highbitdepth = (sd->flags & YV12_FLAG_HIGHBITDEPTH) != 0;
#endif
#if CONFIG_VP9_HIGHBITDEPTH
check_initial_width(cpi, use_highbitdepth, subsampling_x, subsampling_y);
#else
check_initial_width(cpi, subsampling_x, subsampling_y);
#endif // CONFIG_VP9_HIGHBITDEPTH
#if CONFIG_VP9_TEMPORAL_DENOISING
setup_denoiser_buffer(cpi);
#endif
vpx_usec_timer_start(&timer);
if (vp9_lookahead_push(cpi->lookahead, sd, time_stamp, end_time,
#if CONFIG_VP9_HIGHBITDEPTH
use_highbitdepth,
#endif // CONFIG_VP9_HIGHBITDEPTH
frame_flags))
res = -1;
vpx_usec_timer_mark(&timer);
cpi->time_receive_data += vpx_usec_timer_elapsed(&timer);
2010-05-18 17:58:33 +02:00
if ((cm->profile == PROFILE_0 || cm->profile == PROFILE_2) &&
(subsampling_x != 1 || subsampling_y != 1)) {
vpx_internal_error(&cm->error, VPX_CODEC_INVALID_PARAM,
"Non-4:2:0 color format requires profile 1 or 3");
res = -1;
}
if ((cm->profile == PROFILE_1 || cm->profile == PROFILE_3) &&
(subsampling_x == 1 && subsampling_y == 1)) {
vpx_internal_error(&cm->error, VPX_CODEC_INVALID_PARAM,
"4:2:0 color format requires profile 0 or 2");
res = -1;
}
return res;
2010-05-18 17:58:33 +02:00
}
static int frame_is_reference(const VP9_COMP *cpi) {
const VP9_COMMON *cm = &cpi->common;
return cm->frame_type == KEY_FRAME || cpi->refresh_last_frame ||
cpi->refresh_golden_frame || cpi->refresh_alt_ref_frame ||
cm->refresh_frame_context || cm->lf.mode_ref_delta_update ||
cm->seg.update_map || cm->seg.update_data;
}
static void adjust_frame_rate(VP9_COMP *cpi,
const struct lookahead_entry *source) {
int64_t this_duration;
int step = 0;
if (source->ts_start == cpi->first_time_stamp_ever) {
this_duration = source->ts_end - source->ts_start;
step = 1;
} else {
int64_t last_duration =
cpi->last_end_time_stamp_seen - cpi->last_time_stamp_seen;
this_duration = source->ts_end - cpi->last_end_time_stamp_seen;
// do a step update if the duration changes by 10%
if (last_duration)
step = (int)((this_duration - last_duration) * 10 / last_duration);
}
if (this_duration) {
if (step) {
vp9_new_framerate(cpi, 10000000.0 / this_duration);
} else {
// Average this frame's rate into the last second's average
// frame rate. If we haven't seen 1 second yet, then average
// over the whole interval seen.
const double interval = VPXMIN(
(double)(source->ts_end - cpi->first_time_stamp_ever), 10000000.0);
double avg_duration = 10000000.0 / cpi->framerate;
avg_duration *= (interval - avg_duration + this_duration);
avg_duration /= interval;
vp9_new_framerate(cpi, 10000000.0 / avg_duration);
}
}
cpi->last_time_stamp_seen = source->ts_start;
cpi->last_end_time_stamp_seen = source->ts_end;
}
// Returns 0 if this is not an alt ref else the offset of the source frame
// used as the arf midpoint.
static int get_arf_src_index(VP9_COMP *cpi) {
RATE_CONTROL *const rc = &cpi->rc;
int arf_src_index = 0;
if (is_altref_enabled(cpi)) {
if (cpi->oxcf.pass == 2) {
const GF_GROUP *const gf_group = &cpi->twopass.gf_group;
if (gf_group->update_type[gf_group->index] == ARF_UPDATE) {
arf_src_index = gf_group->arf_src_offset[gf_group->index];
}
} else if (rc->source_alt_ref_pending) {
arf_src_index = rc->frames_till_gf_update_due;
}
}
return arf_src_index;
}
static void check_src_altref(VP9_COMP *cpi,
const struct lookahead_entry *source) {
RATE_CONTROL *const rc = &cpi->rc;
if (cpi->oxcf.pass == 2) {
const GF_GROUP *const gf_group = &cpi->twopass.gf_group;
rc->is_src_frame_alt_ref =
(gf_group->update_type[gf_group->index] == OVERLAY_UPDATE);
} else {
rc->is_src_frame_alt_ref =
cpi->alt_ref_source && (source == cpi->alt_ref_source);
}
if (rc->is_src_frame_alt_ref) {
// Current frame is an ARF overlay frame.
cpi->alt_ref_source = NULL;
// Don't refresh the last buffer for an ARF overlay frame. It will
// become the GF so preserve last as an alternative prediction option.
cpi->refresh_last_frame = 0;
}
}
#if CONFIG_INTERNAL_STATS
extern double vp9_get_blockiness(const uint8_t *img1, int img1_pitch,
const uint8_t *img2, int img2_pitch, int width,
int height);
static void adjust_image_stat(double y, double u, double v, double all,
ImageStat *s) {
s->stat[Y] += y;
s->stat[U] += u;
s->stat[V] += v;
s->stat[ALL] += all;
s->worst = VPXMIN(s->worst, all);
}
#endif // CONFIG_INTERNAL_STATS
static void update_level_info(VP9_COMP *cpi, size_t *size, int arf_src_index) {
VP9_COMMON *const cm = &cpi->common;
Vp9LevelInfo *const level_info = &cpi->level_info;
Vp9LevelSpec *const level_spec = &level_info->level_spec;
Vp9LevelStats *const level_stats = &level_info->level_stats;
int i, idx;
uint64_t luma_samples, dur_end;
const uint32_t luma_pic_size = cm->width * cm->height;
double cpb_data_size;
vpx_clear_system_state();
// update level_stats
level_stats->total_compressed_size += *size;
if (cm->show_frame) {
level_stats->total_uncompressed_size +=
luma_pic_size +
2 * (luma_pic_size >> (cm->subsampling_x + cm->subsampling_y));
level_stats->time_encoded =
(cpi->last_end_time_stamp_seen - cpi->first_time_stamp_ever) /
(double)TICKS_PER_SEC;
}
if (arf_src_index > 0) {
if (!level_stats->seen_first_altref) {
level_stats->seen_first_altref = 1;
} else if (level_stats->frames_since_last_altref <
level_spec->min_altref_distance) {
level_spec->min_altref_distance = level_stats->frames_since_last_altref;
}
level_stats->frames_since_last_altref = 0;
} else {
++level_stats->frames_since_last_altref;
}
if (level_stats->frame_window_buffer.len < FRAME_WINDOW_SIZE - 1) {
idx = (level_stats->frame_window_buffer.start +
level_stats->frame_window_buffer.len++) %
FRAME_WINDOW_SIZE;
} else {
idx = level_stats->frame_window_buffer.start;
level_stats->frame_window_buffer.start = (idx + 1) % FRAME_WINDOW_SIZE;
}
level_stats->frame_window_buffer.buf[idx].ts = cpi->last_time_stamp_seen;
level_stats->frame_window_buffer.buf[idx].size = (uint32_t)(*size);
level_stats->frame_window_buffer.buf[idx].luma_samples = luma_pic_size;
if (cm->frame_type == KEY_FRAME) {
level_stats->ref_refresh_map = 0;
} else {
int count = 0;
level_stats->ref_refresh_map |= vp9_get_refresh_mask(cpi);
// Also need to consider the case where the encoder refers to a buffer
// that has been implicitly refreshed after encoding a keyframe.
if (!cm->intra_only) {
level_stats->ref_refresh_map |= (1 << cpi->lst_fb_idx);
level_stats->ref_refresh_map |= (1 << cpi->gld_fb_idx);
level_stats->ref_refresh_map |= (1 << cpi->alt_fb_idx);
}
for (i = 0; i < REF_FRAMES; ++i) {
count += (level_stats->ref_refresh_map >> i) & 1;
}
if (count > level_spec->max_ref_frame_buffers) {
level_spec->max_ref_frame_buffers = count;
}
}
// update average_bitrate
level_spec->average_bitrate = (double)level_stats->total_compressed_size /
125.0 / level_stats->time_encoded;
// update max_luma_sample_rate
luma_samples = 0;
for (i = 0; i < level_stats->frame_window_buffer.len; ++i) {
idx = (level_stats->frame_window_buffer.start +
level_stats->frame_window_buffer.len - 1 - i) %
FRAME_WINDOW_SIZE;
if (i == 0) {
dur_end = level_stats->frame_window_buffer.buf[idx].ts;
}
if (dur_end - level_stats->frame_window_buffer.buf[idx].ts >=
TICKS_PER_SEC) {
break;
}
luma_samples += level_stats->frame_window_buffer.buf[idx].luma_samples;
}
if (luma_samples > level_spec->max_luma_sample_rate) {
level_spec->max_luma_sample_rate = luma_samples;
}
// update max_cpb_size
cpb_data_size = 0;
for (i = 0; i < CPB_WINDOW_SIZE; ++i) {
if (i >= level_stats->frame_window_buffer.len) break;
idx = (level_stats->frame_window_buffer.start +
level_stats->frame_window_buffer.len - 1 - i) %
FRAME_WINDOW_SIZE;
cpb_data_size += level_stats->frame_window_buffer.buf[idx].size;
}
cpb_data_size = cpb_data_size / 125.0;
if (cpb_data_size > level_spec->max_cpb_size) {
level_spec->max_cpb_size = cpb_data_size;
}
// update max_luma_picture_size
if (luma_pic_size > level_spec->max_luma_picture_size) {
level_spec->max_luma_picture_size = luma_pic_size;
}
// update compression_ratio
level_spec->compression_ratio = (double)level_stats->total_uncompressed_size *
cm->bit_depth /
level_stats->total_compressed_size / 8.0;
// update max_col_tiles
if (level_spec->max_col_tiles < (1 << cm->log2_tile_cols)) {
level_spec->max_col_tiles = (1 << cm->log2_tile_cols);
}
}
int vp9_get_compressed_data(VP9_COMP *cpi, unsigned int *frame_flags,
size_t *size, uint8_t *dest, int64_t *time_stamp,
int64_t *time_end, int flush) {
const VP9EncoderConfig *const oxcf = &cpi->oxcf;
VP9_COMMON *const cm = &cpi->common;
Try again to merge branch 'frame-parallel' into master branch. In frame parallel decode, libvpx decoder decodes several frames on all cpus in parallel fashion. If not being flushed, it will only return frame when all the cpus are busy. If getting flushed, it will return all the frames in the decoder. Compare with current serial decode mode in which libvpx decoder is idle between decode calls, libvpx decoder is busy between decode calls. Current frame parallel decode will only speed up the decoding for frame parallel encoded videos. For non frame parallel encoded videos, frame parallel decode is slower than serial decode due to lack of loopfilter worker thread. There are still some known issues that need to be addressed. For example: decode frame parallel videos with segmentation enabled is not right sometimes. * frame-parallel: Add error handling for frame parallel decode and unit test for that. Fix a bug in frame parallel decode and add a unit test for that. Add two test vectors to test frame parallel decode. Add key frame seeking to webmdec and webm_video_source. Implement frame parallel decode for VP9. Increase the thread test range to cover 5, 6, 7, 8 threads. Fix a bug in adding frame parallel unit test. Add VP9 frame-parallel unit test. Manually pick "Make the api behavior conform to api spec." from master branch. Move vp9_dec_build_inter_predictors_* to decoder folder. Add segmentation map array for current and last frame segmentation. Include the right header for VP9 worker thread. Move vp9_thread.* to common. ctrl_get_reference does not need user_priv. Seperate the frame buffers from VP9 encoder/decoder structure. Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:""" Conflicts: test/codec_factory.h test/decode_test_driver.cc test/decode_test_driver.h test/invalid_file_test.cc test/test-data.sha1 test/test.mk test/test_vectors.cc vp8/vp8_dx_iface.c vp9/common/vp9_alloccommon.c vp9/common/vp9_entropymode.c vp9/common/vp9_loopfilter_thread.c vp9/common/vp9_loopfilter_thread.h vp9/common/vp9_mvref_common.c vp9/common/vp9_onyxc_int.h vp9/common/vp9_reconinter.c vp9/decoder/vp9_decodeframe.c vp9/decoder/vp9_decodeframe.h vp9/decoder/vp9_decodemv.c vp9/decoder/vp9_decoder.c vp9/decoder/vp9_decoder.h vp9/encoder/vp9_encoder.c vp9/encoder/vp9_pickmode.c vp9/encoder/vp9_rdopt.c vp9/vp9_cx_iface.c vp9/vp9_dx_iface.c This reverts commit a18da9760a74d9ce6fb9f875706dc639c95402f5. Change-Id: I361442ffec1586d036ea2e0ee97ce4f077585f02
2015-01-27 21:26:28 +01:00
BufferPool *const pool = cm->buffer_pool;
RATE_CONTROL *const rc = &cpi->rc;
struct vpx_usec_timer cmptimer;
YV12_BUFFER_CONFIG *force_src_buffer = NULL;
struct lookahead_entry *last_source = NULL;
struct lookahead_entry *source = NULL;
int arf_src_index;
int i;
2010-05-18 17:58:33 +02:00
if (is_two_pass_svc(cpi)) {
#if CONFIG_SPATIAL_SVC
vp9_svc_start_frame(cpi);
// Use a small empty frame instead of a real frame
if (cpi->svc.encode_empty_frame_state == ENCODING)
source = &cpi->svc.empty_frame;
#endif
if (oxcf->pass == 2) vp9_restore_layer_context(cpi);
} else if (is_one_pass_cbr_svc(cpi)) {
vp9_one_pass_cbr_svc_start_layer(cpi);
}
vpx_usec_timer_start(&cmptimer);
2010-05-18 17:58:33 +02:00
vp9_set_high_precision_mv(cpi, ALTREF_HIGH_PRECISION_MV);
// Is multi-arf enabled.
// Note that at the moment multi_arf is only configured for 2 pass VBR and
// will not work properly with svc.
if ((oxcf->pass == 2) && !cpi->use_svc && (cpi->oxcf.enable_auto_arf > 1))
cpi->multi_arf_allowed = 1;
else
cpi->multi_arf_allowed = 0;
// Normal defaults
cm->reset_frame_context = 0;
cm->refresh_frame_context = 1;
if (!is_one_pass_cbr_svc(cpi)) {
cpi->refresh_last_frame = 1;
cpi->refresh_golden_frame = 0;
cpi->refresh_alt_ref_frame = 0;
}
// Should we encode an arf frame.
arf_src_index = get_arf_src_index(cpi);
// Skip alt frame if we encode the empty frame
if (is_two_pass_svc(cpi) && source != NULL) arf_src_index = 0;
if (arf_src_index) {
for (i = 0; i <= arf_src_index; ++i) {
struct lookahead_entry *e = vp9_lookahead_peek(cpi->lookahead, i);
// Avoid creating an alt-ref if there's a forced keyframe pending.
if (e == NULL) {
break;
} else if (e->flags == VPX_EFLAG_FORCE_KF) {
arf_src_index = 0;
flush = 1;
break;
}
}
}
if (arf_src_index) {
assert(arf_src_index <= rc->frames_to_key);
if ((source = vp9_lookahead_peek(cpi->lookahead, arf_src_index)) != NULL) {
cpi->alt_ref_source = source;
#if CONFIG_SPATIAL_SVC
if (is_two_pass_svc(cpi) && cpi->svc.spatial_layer_id > 0) {
int i;
// Reference a hidden frame from a lower layer
for (i = cpi->svc.spatial_layer_id - 1; i >= 0; --i) {
if (oxcf->ss_enable_auto_arf[i]) {
cpi->gld_fb_idx = cpi->svc.layer_context[i].alt_ref_idx;
break;
}
}
}
cpi->svc.layer_context[cpi->svc.spatial_layer_id].has_alt_frame = 1;
#endif
if ((oxcf->arnr_max_frames > 0) && (oxcf->arnr_strength > 0)) {
int bitrate = cpi->rc.avg_frame_bandwidth / 40;
int not_low_bitrate = bitrate > ALT_REF_AQ_LOW_BITRATE_BOUNDARY;
int not_last_frame = (cpi->lookahead->sz - arf_src_index > 1);
not_last_frame |= ALT_REF_AQ_APPLY_TO_LAST_FRAME;
// Produce the filtered ARF frame.
vp9_temporal_filter(cpi, arf_src_index);
vpx_extend_frame_borders(&cpi->alt_ref_buffer);
// for small bitrates segmentation overhead usually
// eats all bitrate gain from enabling delta quantizers
if (cpi->oxcf.alt_ref_aq != 0 && not_low_bitrate && not_last_frame)
vp9_alt_ref_aq_setup_mode(cpi->alt_ref_aq, cpi);
force_src_buffer = &cpi->alt_ref_buffer;
}
cm->show_frame = 0;
cm->intra_only = 0;
cpi->refresh_alt_ref_frame = 1;
cpi->refresh_golden_frame = 0;
cpi->refresh_last_frame = 0;
rc->is_src_frame_alt_ref = 0;
rc->source_alt_ref_pending = 0;
} else {
rc->source_alt_ref_pending = 0;
}
}
if (!source) {
// Get last frame source.
if (cm->current_video_frame > 0) {
if ((last_source = vp9_lookahead_peek(cpi->lookahead, -1)) == NULL)
return -1;
}
// Read in the source frame.
if (cpi->use_svc)
source = vp9_svc_lookahead_pop(cpi, cpi->lookahead, flush);
else
source = vp9_lookahead_pop(cpi->lookahead, flush);
if (source != NULL) {
cm->show_frame = 1;
cm->intra_only = 0;
// if the flags indicate intra frame, but if the current picture is for
// non-zero spatial layer, it should not be an intra picture.
// TODO(Won Kap): this needs to change if per-layer intra frame is
// allowed.
if ((source->flags & VPX_EFLAG_FORCE_KF) &&
cpi->svc.spatial_layer_id > cpi->svc.first_spatial_layer_to_encode) {
source->flags &= ~(unsigned int)(VPX_EFLAG_FORCE_KF);
}
// Check to see if the frame should be encoded as an arf overlay.
check_src_altref(cpi, source);
}
}
if (source) {
cpi->un_scaled_source = cpi->Source =
force_src_buffer ? force_src_buffer : &source->img;
#ifdef ENABLE_KF_DENOISE
// Copy of raw source for metrics calculation.
if (is_psnr_calc_enabled(cpi))
vp9_copy_and_extend_frame(cpi->Source, &cpi->raw_unscaled_source);
#endif
cpi->unscaled_last_source = last_source != NULL ? &last_source->img : NULL;
*time_stamp = source->ts_start;
*time_end = source->ts_end;
*frame_flags = (source->flags & VPX_EFLAG_FORCE_KF) ? FRAMEFLAGS_KEY : 0;
} else {
*size = 0;
if (flush && oxcf->pass == 1 && !cpi->twopass.first_pass_done) {
vp9_end_first_pass(cpi); /* get last stats packet */
cpi->twopass.first_pass_done = 1;
2010-05-18 17:58:33 +02:00
}
return -1;
}
2010-05-18 17:58:33 +02:00
if (source->ts_start < cpi->first_time_stamp_ever) {
cpi->first_time_stamp_ever = source->ts_start;
cpi->last_end_time_stamp_seen = source->ts_start;
}
// Clear down mmx registers
vpx_clear_system_state();
// adjust frame rates based on timestamps given
if (cm->show_frame) {
adjust_frame_rate(cpi, source);
}
2010-05-18 17:58:33 +02:00
if (is_one_pass_cbr_svc(cpi)) {
vp9_update_temporal_layer_framerate(cpi);
vp9_restore_layer_context(cpi);
}
// Find a free buffer for the new frame, releasing the reference previously
// held.
if (cm->new_fb_idx != INVALID_IDX) {
--pool->frame_bufs[cm->new_fb_idx].ref_count;
}
cm->new_fb_idx = get_free_fb(cm);
if (cm->new_fb_idx == INVALID_IDX) return -1;
Try again to merge branch 'frame-parallel' into master branch. In frame parallel decode, libvpx decoder decodes several frames on all cpus in parallel fashion. If not being flushed, it will only return frame when all the cpus are busy. If getting flushed, it will return all the frames in the decoder. Compare with current serial decode mode in which libvpx decoder is idle between decode calls, libvpx decoder is busy between decode calls. Current frame parallel decode will only speed up the decoding for frame parallel encoded videos. For non frame parallel encoded videos, frame parallel decode is slower than serial decode due to lack of loopfilter worker thread. There are still some known issues that need to be addressed. For example: decode frame parallel videos with segmentation enabled is not right sometimes. * frame-parallel: Add error handling for frame parallel decode and unit test for that. Fix a bug in frame parallel decode and add a unit test for that. Add two test vectors to test frame parallel decode. Add key frame seeking to webmdec and webm_video_source. Implement frame parallel decode for VP9. Increase the thread test range to cover 5, 6, 7, 8 threads. Fix a bug in adding frame parallel unit test. Add VP9 frame-parallel unit test. Manually pick "Make the api behavior conform to api spec." from master branch. Move vp9_dec_build_inter_predictors_* to decoder folder. Add segmentation map array for current and last frame segmentation. Include the right header for VP9 worker thread. Move vp9_thread.* to common. ctrl_get_reference does not need user_priv. Seperate the frame buffers from VP9 encoder/decoder structure. Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:""" Conflicts: test/codec_factory.h test/decode_test_driver.cc test/decode_test_driver.h test/invalid_file_test.cc test/test-data.sha1 test/test.mk test/test_vectors.cc vp8/vp8_dx_iface.c vp9/common/vp9_alloccommon.c vp9/common/vp9_entropymode.c vp9/common/vp9_loopfilter_thread.c vp9/common/vp9_loopfilter_thread.h vp9/common/vp9_mvref_common.c vp9/common/vp9_onyxc_int.h vp9/common/vp9_reconinter.c vp9/decoder/vp9_decodeframe.c vp9/decoder/vp9_decodeframe.h vp9/decoder/vp9_decodemv.c vp9/decoder/vp9_decoder.c vp9/decoder/vp9_decoder.h vp9/encoder/vp9_encoder.c vp9/encoder/vp9_pickmode.c vp9/encoder/vp9_rdopt.c vp9/vp9_cx_iface.c vp9/vp9_dx_iface.c This reverts commit a18da9760a74d9ce6fb9f875706dc639c95402f5. Change-Id: I361442ffec1586d036ea2e0ee97ce4f077585f02
2015-01-27 21:26:28 +01:00
cm->cur_frame = &pool->frame_bufs[cm->new_fb_idx];
if (!cpi->use_svc && cpi->multi_arf_allowed) {
if (cm->frame_type == KEY_FRAME) {
init_buffer_indices(cpi);
} else if (oxcf->pass == 2) {
const GF_GROUP *const gf_group = &cpi->twopass.gf_group;
cpi->alt_fb_idx = gf_group->arf_ref_idx[gf_group->index];
}
}
// Start with a 0 size frame.
*size = 0;
cpi->frame_flags = *frame_flags;
if ((oxcf->pass == 2) &&
(!cpi->use_svc || (is_two_pass_svc(cpi) &&
cpi->svc.encode_empty_frame_state != ENCODING))) {
vp9_rc_get_second_pass_params(cpi);
} else if (oxcf->pass == 1) {
set_frame_size(cpi);
}
if (cpi->oxcf.pass != 0 || cpi->use_svc || frame_is_intra_only(cm) == 1) {
for (i = 0; i < MAX_REF_FRAMES; ++i) cpi->scaled_ref_idx[i] = INVALID_IDX;
}
if (oxcf->pass == 1 && (!cpi->use_svc || is_two_pass_svc(cpi))) {
const int lossless = is_lossless_requested(oxcf);
#if CONFIG_VP9_HIGHBITDEPTH
if (cpi->oxcf.use_highbitdepth)
cpi->td.mb.fwd_txm4x4 =
lossless ? vp9_highbd_fwht4x4 : vpx_highbd_fdct4x4;
else
cpi->td.mb.fwd_txm4x4 = lossless ? vp9_fwht4x4 : vpx_fdct4x4;
cpi->td.mb.highbd_itxm_add =
lossless ? vp9_highbd_iwht4x4_add : vp9_highbd_idct4x4_add;
#else
cpi->td.mb.fwd_txm4x4 = lossless ? vp9_fwht4x4 : vpx_fdct4x4;
#endif // CONFIG_VP9_HIGHBITDEPTH
cpi->td.mb.itxm_add = lossless ? vp9_iwht4x4_add : vp9_idct4x4_add;
vp9_first_pass(cpi, source);
} else if (oxcf->pass == 2 && (!cpi->use_svc || is_two_pass_svc(cpi))) {
Pass2Encode(cpi, size, dest, frame_flags);
} else if (cpi->use_svc) {
SvcEncode(cpi, size, dest, frame_flags);
} else {
// One pass encode
Pass0Encode(cpi, size, dest, frame_flags);
}
2010-05-18 17:58:33 +02:00
if (cm->refresh_frame_context)
cm->frame_contexts[cm->frame_context_idx] = *cm->fc;
2010-05-18 17:58:33 +02:00
// No frame encoded, or frame was dropped, release scaled references.
if ((*size == 0) && (frame_is_intra_only(cm) == 0)) {
release_scaled_references(cpi);
}
if (*size > 0) {
cpi->droppable = !frame_is_reference(cpi);
}
2010-05-18 17:58:33 +02:00
// Save layer specific state.
if (is_one_pass_cbr_svc(cpi) || ((cpi->svc.number_temporal_layers > 1 ||
cpi->svc.number_spatial_layers > 1) &&
oxcf->pass == 2)) {
vp9_save_layer_context(cpi);
}
vpx_usec_timer_mark(&cmptimer);
cpi->time_compress_data += vpx_usec_timer_elapsed(&cmptimer);
// Should we calculate metrics for the frame.
if (is_psnr_calc_enabled(cpi)) generate_psnr_packet(cpi);
2010-05-18 17:58:33 +02:00
if (cpi->keep_level_stats && oxcf->pass != 1)
update_level_info(cpi, size, arf_src_index);
#if CONFIG_INTERNAL_STATS
2010-05-18 17:58:33 +02:00
if (oxcf->pass != 1) {
double samples = 0.0;
cpi->bytes += (int)(*size);
2010-05-18 17:58:33 +02:00
if (cm->show_frame) {
uint32_t bit_depth = 8;
uint32_t in_bit_depth = 8;
cpi->count++;
#if CONFIG_VP9_HIGHBITDEPTH
if (cm->use_highbitdepth) {
in_bit_depth = cpi->oxcf.input_bit_depth;
bit_depth = cm->bit_depth;
}
#endif
2010-05-18 17:58:33 +02:00
if (cpi->b_calculate_psnr) {
YV12_BUFFER_CONFIG *orig = cpi->raw_source_frame;
YV12_BUFFER_CONFIG *recon = cpi->common.frame_to_show;
YV12_BUFFER_CONFIG *pp = &cm->post_proc_buffer;
PSNR_STATS psnr;
#if CONFIG_VP9_HIGHBITDEPTH
vpx_calc_highbd_psnr(orig, recon, &psnr, cpi->td.mb.e_mbd.bd,
in_bit_depth);
#else
vpx_calc_psnr(orig, recon, &psnr);
#endif // CONFIG_VP9_HIGHBITDEPTH
adjust_image_stat(psnr.psnr[1], psnr.psnr[2], psnr.psnr[3],
psnr.psnr[0], &cpi->psnr);
cpi->total_sq_error += psnr.sse[0];
cpi->total_samples += psnr.samples[0];
samples = psnr.samples[0];
{
PSNR_STATS psnr2;
double frame_ssim2 = 0, weight = 0;
#if CONFIG_VP9_POSTPROC
if (vpx_alloc_frame_buffer(
pp, recon->y_crop_width, recon->y_crop_height,
cm->subsampling_x, cm->subsampling_y,
#if CONFIG_VP9_HIGHBITDEPTH
cm->use_highbitdepth,
#endif
VP9_ENC_BORDER_IN_PIXELS, cm->byte_alignment) < 0) {
vpx_internal_error(&cm->error, VPX_CODEC_MEM_ERROR,
"Failed to allocate post processing buffer");
}
{
vp9_ppflags_t ppflags;
ppflags.post_proc_flag = VP9D_DEBLOCK;
ppflags.deblocking_level = 0; // not used in vp9_post_proc_frame()
ppflags.noise_level = 0; // not used in vp9_post_proc_frame()
vp9_post_proc_frame(cm, pp, &ppflags);
}
#endif
vpx_clear_system_state();
#if CONFIG_VP9_HIGHBITDEPTH
vpx_calc_highbd_psnr(orig, pp, &psnr2, cpi->td.mb.e_mbd.bd,
cpi->oxcf.input_bit_depth);
#else
vpx_calc_psnr(orig, pp, &psnr2);
#endif // CONFIG_VP9_HIGHBITDEPTH
cpi->totalp_sq_error += psnr2.sse[0];
cpi->totalp_samples += psnr2.samples[0];
adjust_image_stat(psnr2.psnr[1], psnr2.psnr[2], psnr2.psnr[3],
psnr2.psnr[0], &cpi->psnrp);
2010-05-18 17:58:33 +02:00
#if CONFIG_VP9_HIGHBITDEPTH
if (cm->use_highbitdepth) {
frame_ssim2 = vpx_highbd_calc_ssim(orig, recon, &weight, bit_depth,
in_bit_depth);
} else {
frame_ssim2 = vpx_calc_ssim(orig, recon, &weight);
}
#else
frame_ssim2 = vpx_calc_ssim(orig, recon, &weight);
#endif // CONFIG_VP9_HIGHBITDEPTH
cpi->worst_ssim = VPXMIN(cpi->worst_ssim, frame_ssim2);
cpi->summed_quality += frame_ssim2 * weight;
cpi->summed_weights += weight;
#if CONFIG_VP9_HIGHBITDEPTH
if (cm->use_highbitdepth) {
frame_ssim2 = vpx_highbd_calc_ssim(orig, pp, &weight, bit_depth,
in_bit_depth);
} else {
frame_ssim2 = vpx_calc_ssim(orig, pp, &weight);
}
#else
frame_ssim2 = vpx_calc_ssim(orig, pp, &weight);
#endif // CONFIG_VP9_HIGHBITDEPTH
cpi->summedp_quality += frame_ssim2 * weight;
cpi->summedp_weights += weight;
experiment extending the quantizer range Prior to this change, VP8 min quantizer is 4, which caps the highest quality around 51DB. This experimental change extends the min quantizer to 1, removes the cap and allows the highest quality to be around ~73DB, consistent with the fdct/idct round trip error. To test this change, at configure time use options: --enable-experimental --enable-extend_qrange The following is a brief log of changes in each of the patch sets patch set 1: In this commit, the quantization/dequantization constants are kept unchanged, instead scaling factor 4 is rolled into fdct/idct. Fixed Q0 encoding tests on mobile: Before: 9560.567kbps Overall PSNR:50.255DB VPXSSIM:98.288 Now: 18035.774kbps Overall PSNR:73.022DB VPXSSIM:99.991 patch set 2: regenerated dc/ac quantizer lookup tables based on the scaling factor rolled in the fdct/idct. Also slightly extended the range towards the high quantizer end. patch set 3: slightly tweaked the quantizer tables and generated bits_per_mb table based on Paul's suggestions. patch set 4: fix a typo in idct, re-calculated tables relating active max Q to active min Q patch set 5: added rdmult lookup table based on Q patch set 6: fix rdmult scale: dct coefficient has scaled up by 4 patch set 7: make transform coefficients to be within 16bits patch set 8: normalize 2nd order quantizers patch set 9: fix mis-spellings patch set 10: change the configure script and macros to allow experimental code to be enabled at configure time with --enable-extend_qrange patch set 11: rebase for merge Change-Id: Ib50641ddd44aba2a52ed890222c309faa31cc59c
2010-12-02 00:50:14 +01:00
#if 0
{
FILE *f = fopen("q_used.stt", "a");
fprintf(f, "%5d : Y%f7.3:U%f7.3:V%f7.3:F%f7.3:S%7.3f\n",
cpi->common.current_video_frame, y2, u2, v2,
frame_psnr2, frame_ssim2);
fclose(f);
}
experiment extending the quantizer range Prior to this change, VP8 min quantizer is 4, which caps the highest quality around 51DB. This experimental change extends the min quantizer to 1, removes the cap and allows the highest quality to be around ~73DB, consistent with the fdct/idct round trip error. To test this change, at configure time use options: --enable-experimental --enable-extend_qrange The following is a brief log of changes in each of the patch sets patch set 1: In this commit, the quantization/dequantization constants are kept unchanged, instead scaling factor 4 is rolled into fdct/idct. Fixed Q0 encoding tests on mobile: Before: 9560.567kbps Overall PSNR:50.255DB VPXSSIM:98.288 Now: 18035.774kbps Overall PSNR:73.022DB VPXSSIM:99.991 patch set 2: regenerated dc/ac quantizer lookup tables based on the scaling factor rolled in the fdct/idct. Also slightly extended the range towards the high quantizer end. patch set 3: slightly tweaked the quantizer tables and generated bits_per_mb table based on Paul's suggestions. patch set 4: fix a typo in idct, re-calculated tables relating active max Q to active min Q patch set 5: added rdmult lookup table based on Q patch set 6: fix rdmult scale: dct coefficient has scaled up by 4 patch set 7: make transform coefficients to be within 16bits patch set 8: normalize 2nd order quantizers patch set 9: fix mis-spellings patch set 10: change the configure script and macros to allow experimental code to be enabled at configure time with --enable-extend_qrange patch set 11: rebase for merge Change-Id: Ib50641ddd44aba2a52ed890222c309faa31cc59c
2010-12-02 00:50:14 +01:00
#endif
}
}
if (cpi->b_calculate_blockiness) {
#if CONFIG_VP9_HIGHBITDEPTH
if (!cm->use_highbitdepth)
#endif
{
double frame_blockiness = vp9_get_blockiness(
cpi->Source->y_buffer, cpi->Source->y_stride,
cm->frame_to_show->y_buffer, cm->frame_to_show->y_stride,
cpi->Source->y_width, cpi->Source->y_height);
cpi->worst_blockiness =
VPXMAX(cpi->worst_blockiness, frame_blockiness);
cpi->total_blockiness += frame_blockiness;
}
}
if (cpi->b_calculate_consistency) {
#if CONFIG_VP9_HIGHBITDEPTH
if (!cm->use_highbitdepth)
#endif
{
double this_inconsistency = vpx_get_ssim_metrics(
cpi->Source->y_buffer, cpi->Source->y_stride,
cm->frame_to_show->y_buffer, cm->frame_to_show->y_stride,
cpi->Source->y_width, cpi->Source->y_height, cpi->ssim_vars,
&cpi->metrics, 1);
const double peak = (double)((1 << cpi->oxcf.input_bit_depth) - 1);
double consistency =
vpx_sse_to_psnr(samples, peak, (double)cpi->total_inconsistency);
if (consistency > 0.0)
cpi->worst_consistency =
VPXMIN(cpi->worst_consistency, consistency);
cpi->total_inconsistency += this_inconsistency;
}
}
{
double y, u, v, frame_all;
frame_all = vpx_calc_fastssim(cpi->Source, cm->frame_to_show, &y, &u,
&v, bit_depth, in_bit_depth);
adjust_image_stat(y, u, v, frame_all, &cpi->fastssim);
}
{
double y, u, v, frame_all;
frame_all = vpx_psnrhvs(cpi->Source, cm->frame_to_show, &y, &u, &v,
bit_depth, in_bit_depth);
adjust_image_stat(y, u, v, frame_all, &cpi->psnrhvs);
}
2010-05-18 17:58:33 +02:00
}
}
2010-05-18 17:58:33 +02:00
#endif
if (is_two_pass_svc(cpi)) {
if (cpi->svc.encode_empty_frame_state == ENCODING) {
cpi->svc.encode_empty_frame_state = ENCODED;
cpi->svc.encode_intra_empty_frame = 0;
}
if (cm->show_frame) {
++cpi->svc.spatial_layer_to_encode;
if (cpi->svc.spatial_layer_to_encode >= cpi->svc.number_spatial_layers)
cpi->svc.spatial_layer_to_encode = 0;
// May need the empty frame after an visible frame.
cpi->svc.encode_empty_frame_state = NEED_TO_ENCODE;
}
} else if (is_one_pass_cbr_svc(cpi)) {
if (cm->show_frame) {
++cpi->svc.spatial_layer_to_encode;
if (cpi->svc.spatial_layer_to_encode >= cpi->svc.number_spatial_layers)
cpi->svc.spatial_layer_to_encode = 0;
}
}
vpx_clear_system_state();
return 0;
2010-05-18 17:58:33 +02:00
}
int vp9_get_preview_raw_frame(VP9_COMP *cpi, YV12_BUFFER_CONFIG *dest,
vp9_ppflags_t *flags) {
VP9_COMMON *cm = &cpi->common;
#if !CONFIG_VP9_POSTPROC
(void)flags;
#endif
2010-05-18 17:58:33 +02:00
if (!cm->show_frame) {
return -1;
} else {
int ret;
#if CONFIG_VP9_POSTPROC
ret = vp9_post_proc_frame(cm, dest, flags);
2010-05-18 17:58:33 +02:00
#else
if (cm->frame_to_show) {
*dest = *cm->frame_to_show;
dest->y_width = cm->width;
dest->y_height = cm->height;
dest->uv_width = cm->width >> cm->subsampling_x;
dest->uv_height = cm->height >> cm->subsampling_y;
ret = 0;
} else {
ret = -1;
2010-05-18 17:58:33 +02:00
}
#endif // !CONFIG_VP9_POSTPROC
vpx_clear_system_state();
return ret;
}
}
2010-05-18 17:58:33 +02:00
int vp9_set_internal_size(VP9_COMP *cpi, VPX_SCALING horiz_mode,
VPX_SCALING vert_mode) {
VP9_COMMON *cm = &cpi->common;
int hr = 0, hs = 0, vr = 0, vs = 0;
2010-05-18 17:58:33 +02:00
if (horiz_mode > ONETWO || vert_mode > ONETWO) return -1;
2010-05-18 17:58:33 +02:00
Scale2Ratio(horiz_mode, &hr, &hs);
Scale2Ratio(vert_mode, &vr, &vs);
// always go to the next whole number
cm->width = (hs - 1 + cpi->oxcf.width * hr) / hs;
cm->height = (vs - 1 + cpi->oxcf.height * vr) / vs;
if (cm->current_video_frame) {
assert(cm->width <= cpi->initial_width);
assert(cm->height <= cpi->initial_height);
}
update_frame_size(cpi);
return 0;
2010-05-18 17:58:33 +02:00
}
int vp9_set_size_literal(VP9_COMP *cpi, unsigned int width,
unsigned int height) {
VP9_COMMON *cm = &cpi->common;
#if CONFIG_VP9_HIGHBITDEPTH
check_initial_width(cpi, cm->use_highbitdepth, 1, 1);
#else
check_initial_width(cpi, 1, 1);
#endif // CONFIG_VP9_HIGHBITDEPTH
#if CONFIG_VP9_TEMPORAL_DENOISING
setup_denoiser_buffer(cpi);
#endif
if (width) {
cm->width = width;
if (cm->width > cpi->initial_width) {
cm->width = cpi->initial_width;
printf("Warning: Desired width too large, changed to %d\n", cm->width);
}
}
if (height) {
cm->height = height;
if (cm->height > cpi->initial_height) {
cm->height = cpi->initial_height;
printf("Warning: Desired height too large, changed to %d\n", cm->height);
}
}
assert(cm->width <= cpi->initial_width);
assert(cm->height <= cpi->initial_height);
update_frame_size(cpi);
return 0;
}
void vp9_set_svc(VP9_COMP *cpi, int use_svc) {
cpi->use_svc = use_svc;
return;
}
2010-05-18 17:58:33 +02:00
int vp9_get_quantizer(VP9_COMP *cpi) { return cpi->common.base_qindex; }
void vp9_apply_encoding_flags(VP9_COMP *cpi, vpx_enc_frame_flags_t flags) {
if (flags &
(VP8_EFLAG_NO_REF_LAST | VP8_EFLAG_NO_REF_GF | VP8_EFLAG_NO_REF_ARF)) {
int ref = 7;
if (flags & VP8_EFLAG_NO_REF_LAST) ref ^= VP9_LAST_FLAG;
if (flags & VP8_EFLAG_NO_REF_GF) ref ^= VP9_GOLD_FLAG;
if (flags & VP8_EFLAG_NO_REF_ARF) ref ^= VP9_ALT_FLAG;
vp9_use_as_reference(cpi, ref);
}
if (flags &
(VP8_EFLAG_NO_UPD_LAST | VP8_EFLAG_NO_UPD_GF | VP8_EFLAG_NO_UPD_ARF |
VP8_EFLAG_FORCE_GF | VP8_EFLAG_FORCE_ARF)) {
int upd = 7;
if (flags & VP8_EFLAG_NO_UPD_LAST) upd ^= VP9_LAST_FLAG;
if (flags & VP8_EFLAG_NO_UPD_GF) upd ^= VP9_GOLD_FLAG;
if (flags & VP8_EFLAG_NO_UPD_ARF) upd ^= VP9_ALT_FLAG;
vp9_update_reference(cpi, upd);
}
if (flags & VP8_EFLAG_NO_UPD_ENTROPY) {
vp9_update_entropy(cpi, 0);
}
}