vpx/vp9/common/vp9_maskingmv.c

804 lines
23 KiB
C
Raw Normal View History

WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
/*
============================================================================
Name : vp9_maskingmv.c
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
Author : jimbankoski
Version :
Copyright : Your copyright notice
Description : Hello World in C, Ansi-style
============================================================================
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
unsigned int vp9_sad16x16_sse3(
unsigned char *src_ptr,
int src_stride,
unsigned char *ref_ptr,
int ref_stride,
int max_err);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
int vp8_growmaskmb_sse3(
unsigned char *om,
unsigned char *nm);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
void vp8_makemask_sse3(
unsigned char *y,
unsigned char *u,
unsigned char *v,
unsigned char *ym,
int yp,
int uvp,
int ys,
int us,
int vs,
int yt,
int ut,
int vt);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
unsigned int vp9_sad16x16_unmasked_wmt(
unsigned char *src_ptr,
int src_stride,
unsigned char *ref_ptr,
int ref_stride,
unsigned char *mask);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
unsigned int vp9_sad16x16_masked_wmt(
unsigned char *src_ptr,
int src_stride,
unsigned char *ref_ptr,
int ref_stride,
unsigned char *mask);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
unsigned int vp8_masked_predictor_wmt(
unsigned char *masked,
unsigned char *unmasked,
int src_stride,
unsigned char *dst_ptr,
int dst_stride,
unsigned char *mask);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
unsigned int vp8_masked_predictor_uv_wmt(
unsigned char *masked,
unsigned char *unmasked,
int src_stride,
unsigned char *dst_ptr,
int dst_stride,
unsigned char *mask);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
unsigned int vp8_uv_from_y_mask(
unsigned char *ymask,
unsigned char *uvmask);
int yp = 16;
unsigned char sxy[] = {
40, 40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 80, 120, 120, 90, 90, 90, 90, 90, 80, 120, 120, 90, 90, 90, 90, 90,
40, 40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 80, 120, 120, 90, 90, 90, 90, 90, 80, 120, 120, 90, 90, 90, 90, 90,
40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 40, 80, 120, 120, 90, 90, 90, 90, 90, 80, 120, 120, 90, 90, 90, 90, 90,
40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 40, 80, 120, 120, 90, 90, 90, 90, 90, 80, 120, 120, 90, 90, 90, 90, 90,
40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 40, 40, 80, 120, 120, 90, 90, 90, 90, 90, 80, 120, 120, 90, 90, 90, 90, 90,
60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 80, 120, 120, 90, 90, 90, 90, 90, 80, 120, 120, 90, 90, 90, 90, 90,
60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 80, 120, 120, 90, 90, 90, 90, 90, 80, 120, 120, 90, 90, 90, 90, 90,
60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 80, 120, 120, 90, 90, 90, 90, 90, 80, 120, 120, 90, 90, 90, 90, 90,
40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 40, 40, 80, 120, 120, 90, 90, 90, 90, 90, 80, 120, 120, 90, 90, 90, 90, 90,
40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 40, 40, 80, 120, 120, 90, 90, 90, 90, 90, 80, 120, 120, 90, 90, 90, 90, 90,
40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 40, 80, 120, 120, 90, 90, 90, 90, 90, 80, 120, 120, 90, 90, 90, 90, 90,
40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 40, 80, 120, 120, 90, 90, 90, 90, 90, 80, 120, 120, 90, 90, 90, 90, 90,
40, 40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 80, 120, 120, 90, 90, 90, 90, 90, 80, 120, 120, 90, 90, 90, 90, 90,
40, 40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 80, 120, 120, 90, 90, 90, 90, 90, 80, 120, 120, 90, 90, 90, 90, 90,
40, 40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 80, 120, 120, 90, 90, 90, 90, 90, 80, 120, 120, 90, 90, 90, 90, 90,
40, 40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 80, 120, 120, 90, 90, 90, 90, 90, 80, 120, 120, 90, 90, 90, 90, 90
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
};
unsigned char sts[] = {
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
};
unsigned char str[] = {
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
};
unsigned char y[] = {
40, 40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40,
40, 40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40,
40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 40,
40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 40,
40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 40, 40,
60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 40, 40, 40,
60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 40, 40, 40,
60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 40, 40, 40,
40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 40, 40,
40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 40, 40,
40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 40,
40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40, 40,
40, 40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40,
40, 40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40,
40, 40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40,
40, 40, 40, 60, 60, 60, 60, 40, 40, 40, 40, 60, 60, 60, 60, 40
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
};
int uvp = 8;
unsigned char u[] = {
90, 80, 70, 70, 90, 90, 90, 17,
90, 80, 70, 70, 90, 90, 90, 17,
84, 70, 70, 90, 90, 90, 17, 17,
84, 70, 70, 90, 90, 90, 17, 17,
80, 70, 70, 90, 90, 90, 17, 17,
90, 80, 70, 70, 90, 90, 90, 17,
90, 80, 70, 70, 90, 90, 90, 17,
90, 80, 70, 70, 90, 90, 90, 17
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
};
unsigned char v[] = {
80, 80, 80, 80, 80, 80, 80, 80,
80, 80, 80, 80, 80, 80, 80, 80,
80, 80, 80, 80, 80, 80, 80, 80,
80, 80, 80, 80, 80, 80, 80, 80,
80, 80, 80, 80, 80, 80, 80, 80,
80, 80, 80, 80, 80, 80, 80, 80,
80, 80, 80, 80, 80, 80, 80, 80,
80, 80, 80, 80, 80, 80, 80, 80
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
};
unsigned char ym[256];
unsigned char uvm[64];
typedef struct {
unsigned char y;
unsigned char yt;
unsigned char u;
unsigned char ut;
unsigned char v;
unsigned char vt;
unsigned char use;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
} COLOR_SEG_ELEMENT;
/*
COLOR_SEG_ELEMENT segmentation[]=
{
{ 60,4,80,17,80,10, 1},
{ 40,4,15,10,80,10, 1},
};
*/
COLOR_SEG_ELEMENT segmentation[] = {
{ 79, 44, 92, 44, 237, 60, 1},
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
};
unsigned char pixel_mask(unsigned char y, unsigned char u, unsigned char v,
COLOR_SEG_ELEMENT sgm[],
int c) {
COLOR_SEG_ELEMENT *s = sgm;
unsigned char m = 0;
int i;
for (i = 0; i < c; i++, s++)
m |= (abs(y - s->y) < s->yt &&
abs(u - s->u) < s->ut &&
abs(v - s->v) < s->vt ? 255 : 0);
return m;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
int neighbors[256][8];
int makeneighbors(void) {
int i, j;
for (i = 0; i < 256; i++) {
int r = (i >> 4), c = (i & 15);
int ni = 0;
for (j = 0; j < 8; j++)
neighbors[i][j] = i;
for (j = 0; j < 256; j++) {
int nr = (j >> 4), nc = (j & 15);
if (abs(nr - r) < 2 && abs(nc - c) < 2)
neighbors[i][ni++] = j;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
}
return 0;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
void grow_ymask(unsigned char *ym) {
unsigned char nym[256];
int i, j;
for (i = 0; i < 256; i++) {
nym[i] = ym[i];
for (j = 0; j < 8; j++) {
nym[i] |= ym[neighbors[i][j]];
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
}
for (i = 0; i < 256; i++)
ym[i] = nym[i];
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
void make_mb_mask(unsigned char *y, unsigned char *u, unsigned char *v,
unsigned char *ym, unsigned char *uvm,
int yp, int uvp,
COLOR_SEG_ELEMENT sgm[],
int count) {
int r, c;
unsigned char *oym = ym;
memset(ym, 20, 256);
for (r = 0; r < 8; r++, uvm += 8, u += uvp, v += uvp, y += (yp + yp), ym += 32)
for (c = 0; c < 8; c++) {
int y1 = y[c << 1];
int u1 = u[c];
int v1 = v[c];
int m = pixel_mask(y1, u1, v1, sgm, count);
uvm[c] = m;
ym[c << 1] = uvm[c]; // = pixel_mask(y[c<<1],u[c],v[c],sgm,count);
ym[(c << 1) + 1] = pixel_mask(y[1 + (c << 1)], u[c], v[c], sgm, count);
ym[(c << 1) + 16] = pixel_mask(y[yp + (c << 1)], u[c], v[c], sgm, count);
ym[(c << 1) + 17] = pixel_mask(y[1 + yp + (c << 1)], u[c], v[c], sgm, count);
}
grow_ymask(oym);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
int masked_sad(unsigned char *src, int p, unsigned char *dst, int dp,
unsigned char *ym) {
int i, j;
unsigned sad = 0;
for (i = 0; i < 16; i++, src += p, dst += dp, ym += 16)
for (j = 0; j < 16; j++)
if (ym[j])
sad += abs(src[j] - dst[j]);
return sad;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
int compare_masks(unsigned char *sym, unsigned char *ym) {
int i, j;
unsigned sad = 0;
for (i = 0; i < 16; i++, sym += 16, ym += 16)
for (j = 0; j < 16; j++)
sad += (sym[j] != ym[j] ? 1 : 0);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
return sad;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
int unmasked_sad(unsigned char *src, int p, unsigned char *dst, int dp,
unsigned char *ym) {
int i, j;
unsigned sad = 0;
for (i = 0; i < 16; i++, src += p, dst += dp, ym += 16)
for (j = 0; j < 16; j++)
if (!ym[j])
sad += abs(src[j] - dst[j]);
return sad;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
int masked_motion_search(unsigned char *y, unsigned char *u, unsigned char *v,
int yp, int uvp,
unsigned char *dy, unsigned char *du, unsigned char *dv,
int dyp, int duvp,
COLOR_SEG_ELEMENT sgm[],
int count,
int *mi,
int *mj,
int *ui,
int *uj,
int *wm) {
int i, j;
unsigned char ym[256];
unsigned char uvm[64];
unsigned char dym[256];
unsigned char duvm[64];
unsigned int e = 0;
int beste = 256;
int bmi = -32, bmj = -32;
int bui = -32, buj = -32;
int beste1 = 256;
int bmi1 = -32, bmj1 = -32;
int bui1 = -32, buj1 = -32;
int obeste;
// first try finding best mask and then unmasked
beste = 0xffffffff;
// find best unmasked mv
for (i = -32; i < 32; i++) {
unsigned char *dyz = i * dyp + dy;
unsigned char *duz = i / 2 * duvp + du;
unsigned char *dvz = i / 2 * duvp + dv;
for (j = -32; j < 32; j++) {
// 0,0 masked destination
make_mb_mask(dyz + j, duz + j / 2, dvz + j / 2, dym, duvm, dyp, duvp, sgm, count);
e = unmasked_sad(y, yp, dyz + j, dyp, dym);
if (e < beste) {
bui = i;
buj = j;
beste = e;
}
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
}
// bui=0;buj=0;
// best mv masked destination
make_mb_mask(dy + bui * dyp + buj, du + bui / 2 * duvp + buj / 2, dv + bui / 2 * duvp + buj / 2,
dym, duvm, dyp, duvp, sgm, count);
obeste = beste;
beste = 0xffffffff;
// find best masked
for (i = -32; i < 32; i++) {
unsigned char *dyz = i * dyp + dy;
for (j = -32; j < 32; j++) {
e = masked_sad(y, yp, dyz + j, dyp, dym);
if (e < beste) {
bmi = i;
bmj = j;
beste = e;
}
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
}
beste1 = beste + obeste;
bmi1 = bmi;
bmj1 = bmj;
bui1 = bui;
buj1 = buj;
beste = 0xffffffff;
// source mask
make_mb_mask(y, u, v, ym, uvm, yp, uvp, sgm, count);
// find best mask
for (i = -32; i < 32; i++) {
unsigned char *dyz = i * dyp + dy;
unsigned char *duz = i / 2 * duvp + du;
unsigned char *dvz = i / 2 * duvp + dv;
for (j = -32; j < 32; j++) {
// 0,0 masked destination
make_mb_mask(dyz + j, duz + j / 2, dvz + j / 2, dym, duvm, dyp, duvp, sgm, count);
e = compare_masks(ym, dym);
if (e < beste) {
bmi = i;
bmj = j;
beste = e;
}
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
}
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
// best mv masked destination
make_mb_mask(dy + bmi * dyp + bmj, du + bmi / 2 * duvp + bmj / 2, dv + bmi / 2 * duvp + bmj / 2,
dym, duvm, dyp, duvp, sgm, count);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
obeste = masked_sad(y, yp, dy + bmi * dyp + bmj, dyp, dym);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
beste = 0xffffffff;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
// find best unmasked mv
for (i = -32; i < 32; i++) {
unsigned char *dyz = i * dyp + dy;
for (j = -32; j < 32; j++) {
e = unmasked_sad(y, yp, dyz + j, dyp, dym);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
if (e < beste) {
bui = i;
buj = j;
beste = e;
}
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
}
beste += obeste;
if (beste < beste1) {
*mi = bmi;
*mj = bmj;
*ui = bui;
*uj = buj;
*wm = 1;
} else {
*mi = bmi1;
*mj = bmj1;
*ui = bui1;
*uj = buj1;
*wm = 0;
}
return 0;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
int predict(unsigned char *src, int p, unsigned char *dst, int dp,
unsigned char *ym, unsigned char *prd) {
int i, j;
for (i = 0; i < 16; i++, src += p, dst += dp, ym += 16, prd += 16)
for (j = 0; j < 16; j++)
prd[j] = (ym[j] ? src[j] : dst[j]);
return 0;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
int fast_masked_motion_search(unsigned char *y, unsigned char *u, unsigned char *v,
int yp, int uvp,
unsigned char *dy, unsigned char *du, unsigned char *dv,
int dyp, int duvp,
COLOR_SEG_ELEMENT sgm[],
int count,
int *mi,
int *mj,
int *ui,
int *uj,
int *wm) {
int i, j;
unsigned char ym[256];
unsigned char ym2[256];
unsigned char uvm[64];
unsigned char dym2[256];
unsigned char dym[256];
unsigned char duvm[64];
unsigned int e = 0;
int beste = 256;
int bmi = -32, bmj = -32;
int bui = -32, buj = -32;
int beste1 = 256;
int bmi1 = -32, bmj1 = -32;
int bui1 = -32, buj1 = -32;
int obeste;
// first try finding best mask and then unmasked
beste = 0xffffffff;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
#if 0
for (i = 0; i < 16; i++) {
unsigned char *dy = i * yp + y;
for (j = 0; j < 16; j++)
printf("%2x", dy[j]);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
printf("\n");
}
printf("\n");
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
for (i = -32; i < 48; i++) {
unsigned char *dyz = i * dyp + dy;
for (j = -32; j < 48; j++)
printf("%2x", dyz[j]);
printf("\n");
}
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
#endif
// find best unmasked mv
for (i = -32; i < 32; i++) {
unsigned char *dyz = i * dyp + dy;
unsigned char *duz = i / 2 * duvp + du;
unsigned char *dvz = i / 2 * duvp + dv;
for (j = -32; j < 32; j++) {
// 0,0 masked destination
vp8_makemask_sse3(dyz + j, duz + j / 2, dvz + j / 2, dym, dyp, duvp,
sgm[0].y, sgm[0].u, sgm[0].v,
sgm[0].yt, sgm[0].ut, sgm[0].vt);
vp8_growmaskmb_sse3(dym, dym2);
e = vp9_sad16x16_unmasked_wmt(y, yp, dyz + j, dyp, dym2);
if (e < beste) {
bui = i;
buj = j;
beste = e;
}
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
}
// bui=0;buj=0;
// best mv masked destination
vp8_makemask_sse3(dy + bui * dyp + buj, du + bui / 2 * duvp + buj / 2, dv + bui / 2 * duvp + buj / 2,
dym, dyp, duvp,
sgm[0].y, sgm[0].u, sgm[0].v,
sgm[0].yt, sgm[0].ut, sgm[0].vt);
vp8_growmaskmb_sse3(dym, dym2);
obeste = beste;
beste = 0xffffffff;
// find best masked
for (i = -32; i < 32; i++) {
unsigned char *dyz = i * dyp + dy;
for (j = -32; j < 32; j++) {
e = vp9_sad16x16_masked_wmt(y, yp, dyz + j, dyp, dym2);
if (e < beste) {
bmi = i;
bmj = j;
beste = e;
}
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
}
beste1 = beste + obeste;
bmi1 = bmi;
bmj1 = bmj;
bui1 = bui;
buj1 = buj;
// source mask
vp8_makemask_sse3(y, u, v,
ym, yp, uvp,
sgm[0].y, sgm[0].u, sgm[0].v,
sgm[0].yt, sgm[0].ut, sgm[0].vt);
vp8_growmaskmb_sse3(ym, ym2);
// find best mask
for (i = -32; i < 32; i++) {
unsigned char *dyz = i * dyp + dy;
unsigned char *duz = i / 2 * duvp + du;
unsigned char *dvz = i / 2 * duvp + dv;
for (j = -32; j < 32; j++) {
// 0,0 masked destination
vp8_makemask_sse3(dyz + j, duz + j / 2, dvz + j / 2, dym, dyp, duvp,
sgm[0].y, sgm[0].u, sgm[0].v,
sgm[0].yt, sgm[0].ut, sgm[0].vt);
vp8_growmaskmb_sse3(dym, dym2);
e = compare_masks(ym2, dym2);
if (e < beste) {
bmi = i;
bmj = j;
beste = e;
}
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
}
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
vp8_makemask_sse3(dy + bmi * dyp + bmj, du + bmi / 2 * duvp + bmj / 2, dv + bmi / 2 * duvp + bmj / 2,
dym, dyp, duvp,
sgm[0].y, sgm[0].u, sgm[0].v,
sgm[0].yt, sgm[0].ut, sgm[0].vt);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
vp8_growmaskmb_sse3(dym, dym2);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
obeste = vp9_sad16x16_masked_wmt(y, yp, dy + bmi * dyp + bmj, dyp, dym2);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
beste = 0xffffffff;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
// find best unmasked mv
for (i = -32; i < 32; i++) {
unsigned char *dyz = i * dyp + dy;
for (j = -32; j < 32; j++) {
e = vp9_sad16x16_unmasked_wmt(y, yp, dyz + j, dyp, dym2);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
if (e < beste) {
bui = i;
buj = j;
beste = e;
}
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
}
beste += obeste;
if (beste < beste1) {
*mi = bmi;
*mj = bmj;
*ui = bui;
*uj = buj;
*wm = 1;
} else {
*mi = bmi1;
*mj = bmj1;
*ui = bui1;
*uj = buj1;
*wm = 0;
beste = beste1;
}
return beste;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
int predict_all(unsigned char *ym, unsigned char *um, unsigned char *vm,
int ymp, int uvmp,
unsigned char *yp, unsigned char *up, unsigned char *vp,
int ypp, int uvpp,
COLOR_SEG_ELEMENT sgm[],
int count,
int mi,
int mj,
int ui,
int uj,
int wm) {
int i, j;
unsigned char dym[256];
unsigned char dym2[256];
unsigned char duvm[64];
unsigned char *yu = ym, *uu = um, *vu = vm;
unsigned char *dym3 = dym2;
ym += mi * ymp + mj;
um += mi / 2 * uvmp + mj / 2;
vm += mi / 2 * uvmp + mj / 2;
yu += ui * ymp + uj;
uu += ui / 2 * uvmp + uj / 2;
vu += ui / 2 * uvmp + uj / 2;
// best mv masked destination
if (wm)
vp8_makemask_sse3(ym, um, vm, dym, ymp, uvmp,
sgm[0].y, sgm[0].u, sgm[0].v,
sgm[0].yt, sgm[0].ut, sgm[0].vt);
else
vp8_makemask_sse3(yu, uu, vu, dym, ymp, uvmp,
sgm[0].y, sgm[0].u, sgm[0].v,
sgm[0].yt, sgm[0].ut, sgm[0].vt);
vp8_growmaskmb_sse3(dym, dym2);
vp8_masked_predictor_wmt(ym, yu, ymp, yp, ypp, dym3);
vp8_uv_from_y_mask(dym3, duvm);
vp8_masked_predictor_uv_wmt(um, uu, uvmp, up, uvpp, duvm);
vp8_masked_predictor_uv_wmt(vm, vu, uvmp, vp, uvpp, duvm);
return 0;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
unsigned char f0p[1280 * 720 * 3 / 2];
unsigned char f1p[1280 * 720 * 3 / 2];
unsigned char prd[1280 * 720 * 3 / 2];
unsigned char msk[1280 * 720 * 3 / 2];
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
int mainz(int argc, char *argv[]) {
FILE *f = fopen(argv[1], "rb");
FILE *g = fopen(argv[2], "wb");
int w = atoi(argv[3]), h = atoi(argv[4]);
int y_stride = w, uv_stride = w / 2;
int r, c;
unsigned char *f0 = f0p, *f1 = f1p, *t;
unsigned char ym[256], uvm[64];
unsigned char ym2[256], uvm2[64];
unsigned char ym3[256], uvm3[64];
int a, b;
COLOR_SEG_ELEMENT last = { 20, 20, 20, 20, 230, 20, 1}, best;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
#if 0
makeneighbors();
COLOR_SEG_ELEMENT segmentation[] = {
{ 60, 4, 80, 17, 80, 10, 1},
{ 40, 4, 15, 10, 80, 10, 1},
};
make_mb_mask(y, u, v, ym2, uvm2, 16, 8, segmentation, 1);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
vp8_makemask_sse3(y, u, v, ym, (int) 16, (int) 8,
(int) segmentation[0].y, (int) segmentation[0].u, (int) segmentation[0].v,
segmentation[0].yt, segmentation[0].ut, segmentation[0].vt);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
vp8_growmaskmb_sse3(ym, ym3);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
a = vp9_sad16x16_masked_wmt(str, 16, sts, 16, ym3);
b = vp9_sad16x16_unmasked_wmt(str, 16, sts, 16, ym3);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
vp8_masked_predictor_wmt(str, sts, 16, ym, 16, ym3);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
vp8_uv_from_y_mask(ym3, uvm3);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
return 4;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
#endif
makeneighbors();
memset(prd, 128, w * h * 3 / 2);
fread(f0, w * h * 3 / 2, 1, f);
while (!feof(f)) {
unsigned char *ys = f1, *yd = f0, *yp = prd;
unsigned char *us = f1 + w * h, *ud = f0 + w * h, *up = prd + w * h;
unsigned char *vs = f1 + w * h * 5 / 4, *vd = f0 + w * h * 5 / 4, *vp = prd + w * h * 5 / 4;
fread(f1, w * h * 3 / 2, 1, f);
ys += 32 * y_stride;
yd += 32 * y_stride;
yp += 32 * y_stride;
us += 16 * uv_stride;
ud += 16 * uv_stride;
up += 16 * uv_stride;
vs += 16 * uv_stride;
vd += 16 * uv_stride;
vp += 16 * uv_stride;
for (r = 32; r < h - 32; r += 16,
ys += 16 * w, yd += 16 * w, yp += 16 * w,
us += 8 * uv_stride, ud += 8 * uv_stride, up += 8 * uv_stride,
vs += 8 * uv_stride, vd += 8 * uv_stride, vp += 8 * uv_stride) {
for (c = 32; c < w - 32; c += 16) {
int mi, mj, ui, uj, wm;
int bmi, bmj, bui, buj, bwm;
unsigned char ym[256];
if (vp9_sad16x16_sse3(ys + c, y_stride, yd + c, y_stride, 0xffff) == 0)
bmi = bmj = bui = buj = bwm = 0;
else {
COLOR_SEG_ELEMENT cs[5];
int j;
unsigned int beste = 0xfffffff;
unsigned int bestj = 0;
// try color from last mb segmentation
cs[0] = last;
// try color segs from 4 pixels in mb recon as segmentation
cs[1].y = yd[c + y_stride + 1];
cs[1].u = ud[c / 2 + uv_stride];
cs[1].v = vd[c / 2 + uv_stride];
cs[1].yt = cs[1].ut = cs[1].vt = 20;
cs[2].y = yd[c + w + 14];
cs[2].u = ud[c / 2 + uv_stride + 7];
cs[2].v = vd[c / 2 + uv_stride + 7];
cs[2].yt = cs[2].ut = cs[2].vt = 20;
cs[3].y = yd[c + w * 14 + 1];
cs[3].u = ud[c / 2 + uv_stride * 7];
cs[3].v = vd[c / 2 + uv_stride * 7];
cs[3].yt = cs[3].ut = cs[3].vt = 20;
cs[4].y = yd[c + w * 14 + 14];
cs[4].u = ud[c / 2 + uv_stride * 7 + 7];
cs[4].v = vd[c / 2 + uv_stride * 7 + 7];
cs[4].yt = cs[4].ut = cs[4].vt = 20;
for (j = 0; j < 5; j++) {
int e;
e = fast_masked_motion_search(
ys + c, us + c / 2, vs + c / 2, y_stride, uv_stride,
yd + c, ud + c / 2, vd + c / 2, y_stride, uv_stride,
&cs[j], 1, &mi, &mj, &ui, &uj, &wm);
if (e < beste) {
bmi = mi;
bmj = mj;
bui = ui;
buj = uj, bwm = wm;
bestj = j;
beste = e;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
}
best = cs[bestj];
// best = segmentation[0];
last = best;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
predict_all(yd + c, ud + c / 2, vd + c / 2, w, uv_stride,
yp + c, up + c / 2, vp + c / 2, w, uv_stride,
&best, 1, bmi, bmj, bui, buj, bwm);
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}
fwrite(prd, w * h * 3 / 2, 1, g);
t = f0;
f0 = f1;
f1 = t;
}
fclose(f);
fclose(g);
return 0;
WebM Experimental Codec Branch Snapshot This is a code snapshot of experimental work currently ongoing for a next-generation codec. The codebase has been cut down considerably from the libvpx baseline. For example, we are currently only supporting VBR 2-pass rate control and have removed most of the code relating to coding speed, threading, error resilience, partitions and various other features. This is in part to make the codebase easier to work on and experiment with, but also because we want to have an open discussion about how the bitstream will be structured and partitioned and not have that conversation constrained by past work. Our basic working pattern has been to initially encapsulate experiments using configure options linked to #IF CONFIG_XXX statements in the code. Once experiments have matured and we are reasonably happy that they give benefit and can be merged without breaking other experiments, we remove the conditional compile statements and merge them in. Current changes include: * Temporal coding experiment for segments (though still only 4 max, it will likely be increased). * Segment feature experiment - to allow various bits of information to be coded at the segment level. Features tested so far include mode and reference frame information, limiting end of block offset and transform size, alongside Q and loop filter parameters, but this set is very fluid. * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used in MBs using 16x16 prediction modes within inter frames. * Compound prediction (combination of signals from existing predictors to create a new predictor). * 8 tap interpolation filters and 1/8th pel motion vectors. * Loop filter modifications. * Various entropy modifications and changes to how entropy contexts and updates are handled. * Extended quantizer range matched to transform precision improvements. There are also ongoing further experiments that we hope to merge in the near future: For example, coding of motion and other aspects of the prediction signal to better support larger image formats, use of larger block sizes (e.g. 32x32 and up) and lossless non-transform based coding options (especially for key frames). It is our hope that we will be able to make regular updates and we will warmly welcome community contributions. Please be warned that, at this stage, the codebase is currently slower than VP8 stable branch as most new code has not been optimized, and even the 'C' has been deliberately written to be simple and obvious, not fast. The following graphs have the initial test results, numbers in the tables measure the compression improvement in terms of percentage. The build has the following optional experiments configured: --enable-experimental --enable-enhanced_interp --enable-uvintra --enable-high_precision_mv --enable-sixteenth_subpel_uv CIF Size clips: http://getwebm.org/tmp/cif/ HD size clips: http://getwebm.org/tmp/hd/ (stable_20120309 represents encoding results of WebM master branch build as of commit#7a15907) They were encoded using the following encode parameters: --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63 --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999 --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50 --minsection-pct=0 --maxsection-pct=800 --sharpness=0 --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF) --arnr-type=3 Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
2012-03-10 02:32:50 +01:00
}