Version 0.18 ------------ - Satish Mittal and David J Sullivan fixed an infinit recv() loop in libssh2_banner_receive() Version 0.17 ------------ Changes since previous version include: o Re-indented the source code with this GNU indent setup: --braces-on-if-line --braces-after-struct-decl-line --space-after-cast --line-length 79 --comment-line-length 79 --cuddle-else --no-tabs --tab-size 8 --indent-level 4 --no-space-after-for --space-after-if --space-after-while --no-space-after-function-call-names Version 0.16 ------------ Changes since previous version include: o CRLF stripping fix for PEM reading o libssh2_scp_recv() error message fix o added HACKING as an initial attempt to describe our source code format o new public defines in include/libssh2.h to allow applictions to figure out version number etc o new script (maketgz) to build releases with o updated files for building with MSVC and mingw o keyboard-interactive would always fail due to claimed memory problem o a few minor memory leaks fixed o libssh2_poll() no longer relies on C99 features o AIX 4 and 5 now supports non-blocking sockets o large file magic checks in configure o LIBSSH2_APINO was removed from the public header file This release would not have been possible without these friendly contributors: James Housley, Simon Josefsson, Dan Fandrich, Guenter Knauf and I too did some poking. (Sorry if I forgot anyone I should've mentioned here.) Of course we would have nothing without the great work by Sara Golemon that we're extending and building upon. Version 0.15 ------------ Added libssh2_sftp_readdir_ex() and updated LIBSSH2_APINO to 200706151200 (James Housley) Converted all of the libssh2 code to be able to work in non-blocking mode. This included some public API changes, listed below (James Housley) Changed function return values: int libssh2_session_free() int libssh2_publickey_shutdown() ssize_t libssh2_channel_read_ex() ssize_t libssh2_channel_write_ex() Added functions: libssh2_session_last_errno(), libssh2_channel_handle_extended_data2(), libssh2_channel_wait_closed(), libssh2_channel_wait_eof(), libssh2_session_set_blocking() Removed functions: libssh2_channel_readnb_ex(), libssh2_channel_writenb_ex(), libssh2_sftp_readnb(), libssh2_sftp_writenb(), libssh2_sftp_mkdirnb_ex() Added the following functions for non-blocking operations: (Daniel Stenberg) libssh2_channel_readnb_ex() libssh2_channel_writenb_ex() libssh2_sftp_readnb() libssh2_sftp_writenb() Size parameter changed from 'int' to 'unsigned int' in several public APIs. Added (a few) man pages in docs/. (Daniel Stenberg) Maximum SSH packet size is now some 35000 bytes. Private include files are now in src/ and only public headers are in include/. (Daniel Stenberg) Automake and libtool are being used (increased portability). (Daniel Stenberg) Fixed OpenSSL detection using pkg-config. (Daniel Stenberg) Simple self test added to tests/. (Simon Josefsson) Libgcrypt can now be used instead of OpenSSL if you specify --with-libgcrypt. (Simon Josefsson) Fixed a memory leak in the packet handling, and better handle out of memory situations. (Dan Fandrich) Made libssh2 build with OpenSSL 0.9.6. (Dan Fandrich) Improved portability to Solaris related to -lsocket and -lnsl. (Simon Josefsson) Clean up of README, INSTALL, NEWS, added ChangeLog. (Simon Josefsson) Improve debugging code. Avoids many #ifdef's. Improved session closing to avoid potentially truncated files on OpenSSH servers (Dan Fandrich) Made some function parameters in the API const (Dan Fandrich) Version 0.14 ------------ Plug leaks in EVP cipher init/shutdown. (Selcuk Gueney) Allow socket_fd == 0 in libssh2_session_startup(). (puudeli) Swap ordering of packet_add/packet-inspection to avoid inspect after free. (Selcuk) Swap KEX_INIT ordering, send our KEX_INIT first. Add check for oportunistic KEX_INIT packets. Burn bad guess if necessary. Fix OpenSSL detection using pkg-config. (Dan Casey) Version 0.13 ------------ Fixed channel not being marked closed when CHANNEL_CLOSE package cannot be sent. (David Robins) Fixed payload packet allocation bug when invalid packet length received. (David Robins) Fixed `make install' target for MacOSX. Add terminating NULL character to readlink()/realpath() results. BugFix#1436593: Apply build options for HPUX targets. Version 0.12 ------------ Added support for publickey subsytem (not the same as publickey auth). Fix x11_req. Multiple packet_len issues and error handling logic. (Thanks Simon Hart) Fix generation of 'e' portion of Diffie-Hellman keyset. Use appropriate order for BN_rand() rather than fixed group1-specific value. Re-fixed libssh2_sftp_rename_ex() Transport had right packet_len, but sftp layer still had extra 4 bytes. Fixed build with newer OpenSSL headers. Added extern "C" declarations to libssh2_sftp.h for C++ compatability. Version 0.11 ------------ Added libssh2_chnnale_get_exit_status() -- Mikhail Added libssh2_channel_wait_closed() -- Mikhail Added libssh2_userauth_keyboard_interactive_ex() -- Mikhail Added libssh2_channel_receive_window_adjust() to be able to increase the size of the receive window. Added queueing for small window_adjust packets to avoid unnecessary packet conversation. Fixed libssh2_sftp_rename_ex() to only send flags parameter if version >= 5 negotiated (not currently possible, but will be and might as well keep the API consistent). Version 0.10 ------------ Added developer debugging hooks. See --enable-debug-* options to ./configure Ignore extended data in the SFTP layer. With no other mechanism to deal with that data it'd just fill up and get stuck. (Re)Fixed channel_write() to provide an opportunity for window space to become available again. (Re)Fixed SFTP INIT to send the correct SFTP packet length. Fixed segfault when client and host can't agree on a hostkey/crypt/mac/comp method. (Thanks puudeli) Fixed major issue with sftp packet buffering mechanism. Using wrong blocking semantics. (No puudeli, YOU the man) Reduced busy-looping of libssh2_sftp_packet_requirev. Version 0.9 ----------- Changed blocking_read to only block as much as necessary and not an arbitrary length of time. (Thanks Felix) Fixed SFTP INIT/VERSION to exclude request_id and send correct maximum version number. Fixed SFTP to be properly BC with version 1 and 2 servers. Fixed libssh2_poll() to recognized closed sessions/channels. Fixed libssh2_channel_write_ex() to fully block when set to blocking mode. Return actual bytes written as well. (Thanks deadem) Added tests for -lm and -lsocket and add them when necessary. Added libssh2_channel_window_read_ex() and libssh2_channel_window_write_ex() for examining the ssh transport windowing states. Version 0.8 ----------- Fix potential segfault in compression/decompression. Fix compatability with older versions of OpenSSL Swapped order of none,zlib compression modes to prefer no compression by default. Added sys/uio.h for platforms (FBSD) which need it in order to define struct iovec. Added libssh2_poll() to check status of sockets/channels/listeners. Removed unnecessary inclusion of stdio.h (holdover from debugging) Version 0.7 ----------- Added libssh2_userauth_hostbased_fromfile_ex() for authenticating from hostkey. Added configure recognition for MacOSX (Darwin) (Thanks Gabe) Fixed extended data identification in libssh2_channel_read(). Fixed window adjust code. Hadn't acknowledged adjustments correctly. Removed initial_window_size requirement for sending window adjust packet. Version 0.6 ----------- Added LIBSSH2_FLAG_SIGPIPE to enable/disable SIGPIPE generated by send()/recv() calls. Default off. Added libssh2_session_flag() to set optional session flags. Collapsed exchanging_keys/newkeys/authenticated flags into single state attribute. Fix zlib compression issue when internal buffer state misses partial sync. Fix segfault when libssh2_session_methods() is called prior to session_startup(). Fixed client to server channel windowing. Pervent send queue overruns. Swapped banner send/receive order (send first, then wait for response). Version 0.5 ----------- *** BC Break *** Reimplemented libssh2_session_methods() to match libssh2_session_method_pref() style Fixed libssh2_attr2bin() (effects any setstat style call). Fixed authenticating with encrypted private key. Fixed authenticating via ssh-dss public key. Fixed KEX_INIT cookie and packet padding to use actual random data Added DESTDIR support to makefiles (Adam Gołębiowski -- I hope that character set translates right) Added libssh2_channel_forward_listen_ex(), libssh2_channel_forward_cancel(), and libssh2_channel_forward_accept(). Added ./configure option '--disable-gex-new' to allow using the older group-exchange format Added MAC methods hmac-md5 and hmac-md5-96. Version 0.4 ----------- Fixed crash when trying to free sftp_dirhandle data from a filehandle struct. Fixed leak in sftp_open_ex(), handle->handle not freed in handle_close(). Fixed leak in sftp_symlink_ex(), result for READLINK and REALPATH not freed unless there was an error. Added libssh2_banner_set(), specify an arbitrary banner to send on introduction. Version 0.3 ----------- Fixed libssh2_channel_read_ex(). Packet loop initialized BEFORE transport polled for new packets (should have been after). Fixed blocking issues in scp_send()/scp_recv(). Fixed degree of indirection in macerror callback. Changed packet read mechanism to use a fixed buffer and avoid unnecessary alloc/free calls. (especially while non-block looping) Added channel close callback. Added SFTP support (Using its own header file: libssh2_sftp.h) Version 0.2 ----------- Changed extended data ignorance mechanism: libssh2_channel_ignore_extended_data() changed to libssh2_channel_handle_extended_data() Macro introduced for backward compatability during beta phase. *** THE LIBSSH2_CHANNEL_IGNORE_EXTENDED_DATA() MACRO WILL BE REMOVED PRIOR TO 1.0 RELEASE *** libssh2_channel_handle_extended_data() may be passed one of three "ignore_mode" constants LIBSSH2_CHANNEL_EXTENDED_DATA_NONE Default behavior, queue ED packets and return them with read_ex LIBSSH2_CHANNEL_EXTENDED_DATA_IGNORE Equivalent to libssh2_channel_ignore_extended_data() IGNORE will implicitly flush the extended data stream(s) LIBSSH2_CHANNEL_EXTENDED_DATA_MERGE Calls to channel_read() will check both the standard data stream and the extended data stream(s) for the first available packet Changed libssh2_session_disconnect_ex() to return an error code when alloc fails Added libssh2_channel_flush_ex() and basic macros: ..._flush() ..._flush_stderr() flush_ex accepts either the streamid (0 for standard data, 1 for stderr) or one of the two following constants: LIBSSH2_CHANNEL_FLUSH_ALL Flush all streams LIBSSH2_CHANNEL_FLUSH_EXTENDED_DATA Flush all streams EXCEPT the standard data stream Added libssh2_session_callback_set() for setting ignore/debug/disconnect/macerror callbacks Added libssh2_session_method_pref() to selectively set methods and method preferences. Added libssh2_session_methods() to determine what methods were negotiated. Added libssh2_session_abstract() for retreiving &session->abstract Added libssh2_session_last_error() for retreiving error codes/messages Version 0.1 ----------- Initial Release: KEX methods: diffie-hellman-group14-sha1, diffie-hellman-group-exchange-sha1, diffie-hellman-group1-sha1 Hostkey methods: ssh-rsa, ssh-dss Cipher methods: aes256-cbc, rijndael-cbc@lysator.liu.se, aes192-cbc, aes128-cbc, blowfish-cbc, arcfour, cast128-cbc, 3des-cbc, none* Compression methods: zlib, none MAC methods: hmac-sha1, hmac-sha1-96, hmac-ripemd160, hmac-ripemd160@openssh.com none* *Cipher/MAC "none" is disabled by default for security purposes, Use --enable-crypt-none and/or --enable-mac-none with ./configure to enable