358 changed files with 5114 additions and 59586 deletions
--- a/.gitattribute
+++ b/.gitattribute
@ -1,2 +0,0 @@
-win32/msvcproj.head -crlf
-win32/msvcproj.foot -crlf
--- a/.gitignore
+++ b/.gitignore
@ -1,35 +0,0 @@
-.deps
-.libs
-*.lib
-*.pdb
-*.dll
-*.exe
-*.obj
-.*.swp
-Debug
-Release
-*.exp
-Makefile
-Makefile.in
-aclocal.m4
-autom4te.cache
-config.guess
-config.log
-config.status
-config.sub
-configure
-depcomp
-libtool
-ltmain.sh
-missing
-ssh2_sample
-libssh2-*.tar.gz
-install-sh
-*.o
-*.lo
-*.la
-mkinstalldirs
-tags
-libssh2.pc
-TAGS
-*~
--- a/.travis.yml
+++ b/.travis.yml
@ -1,75 +0,0 @@
-# Copyright (c) 2014 Alexander Lamaison <alexander.lamaison@gmail.com>
-#
-# Redistribution and use in source and binary forms,
-# with or without modification, are permitted provided
-# that the following conditions are met:
-#
-#   Redistributions of source code must retain the above
-#   copyright notice, this list of conditions and the
-#   following disclaimer.
-#
-#   Redistributions in binary form must reproduce the above
-#   copyright notice, this list of conditions and the following
-#   disclaimer in the documentation and/or other materials
-#   provided with the distribution.
-#
-#   Neither the name of the copyright holder nor the names
-#   of any other contributors may be used to endorse or
-#   promote products derived from this software without
-#   specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
-# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
-# OF SUCH DAMAGE.
-
-language: c
-
-compiler:
-  - gcc
-  - clang
-
-env:
-  matrix:
-   - ADDRESS_SIZE=64 CRYPTO_BACKEND=OpenSSL BUILD_SHARED_LIBS=OFF ENABLE_ZLIB_COMPRESSION=OFF
-   - ADDRESS_SIZE=64 CRYPTO_BACKEND=OpenSSL BUILD_SHARED_LIBS=ON ENABLE_ZLIB_COMPRESSION=OFF
-   - ADDRESS_SIZE=64 CRYPTO_BACKEND=OpenSSL BUILD_SHARED_LIBS=OFF ENABLE_ZLIB_COMPRESSION=ON
-   - ADDRESS_SIZE=64 CRYPTO_BACKEND=OpenSSL BUILD_SHARED_LIBS=ON ENABLE_ZLIB_COMPRESSION=ON
-   - ADDRESS_SIZE=64 CRYPTO_BACKEND=Libgcrypt BUILD_SHARED_LIBS=OFF ENABLE_ZLIB_COMPRESSION=OFF
-   - ADDRESS_SIZE=64 CRYPTO_BACKEND=Libgcrypt BUILD_SHARED_LIBS=ON ENABLE_ZLIB_COMPRESSION=OFF
-   - ADDRESS_SIZE=64 CRYPTO_BACKEND=Libgcrypt BUILD_SHARED_LIBS=OFF ENABLE_ZLIB_COMPRESSION=ON
-   - ADDRESS_SIZE=64 CRYPTO_BACKEND=Libgcrypt BUILD_SHARED_LIBS=ON ENABLE_ZLIB_COMPRESSION=ON
-   - ADDRESS_SIZE=32 CRYPTO_BACKEND=OpenSSL BUILD_SHARED_LIBS=OFF ENABLE_ZLIB_COMPRESSION=OFF
-   - ADDRESS_SIZE=32 CRYPTO_BACKEND=OpenSSL BUILD_SHARED_LIBS=ON ENABLE_ZLIB_COMPRESSION=OFF
-   - ADDRESS_SIZE=32 CRYPTO_BACKEND=OpenSSL BUILD_SHARED_LIBS=OFF ENABLE_ZLIB_COMPRESSION=ON
-   - ADDRESS_SIZE=32 CRYPTO_BACKEND=OpenSSL BUILD_SHARED_LIBS=ON ENABLE_ZLIB_COMPRESSION=ON
-   - ADDRESS_SIZE=32 CRYPTO_BACKEND=Libgcrypt BUILD_SHARED_LIBS=OFF ENABLE_ZLIB_COMPRESSION=OFF
-   - ADDRESS_SIZE=32 CRYPTO_BACKEND=Libgcrypt BUILD_SHARED_LIBS=ON ENABLE_ZLIB_COMPRESSION=OFF
-   - ADDRESS_SIZE=32 CRYPTO_BACKEND=Libgcrypt BUILD_SHARED_LIBS=OFF ENABLE_ZLIB_COMPRESSION=ON
-   - ADDRESS_SIZE=32 CRYPTO_BACKEND=Libgcrypt BUILD_SHARED_LIBS=ON ENABLE_ZLIB_COMPRESSION=ON
-
-before_install:
-  - sudo add-apt-repository --yes ppa:kalakris/cmake
-  - sudo apt-get update
-  - sudo apt-get -y install cmake
-  - if [ $ADDRESS_SIZE = '64' ]; then sudo apt-get install -y libgcrypt11-dev libssl-dev zlib1g-dev; fi
-  - if [ $ADDRESS_SIZE = '32' ]; then sudo apt-get install -y linux-libc-dev linux-libc-dev:i386; fi
-  - if [ $ADDRESS_SIZE = '32' ]; then sudo apt-get install -y gcc-multilib libgcrypt11-dev:i386 libssl-dev:i386 zlib1g-dev:i386; fi
-  - if [ $ADDRESS_SIZE = '32' ]; then export TOOLCHAIN_OPTION="-DCMAKE_TOOLCHAIN_FILE=../cmake/Toolchain-Linux-32.cmake"; fi
-
-install:
-  - mkdir bin
-  - cd bin
-
-script:
-  - cmake $TOOLCHAIN_OPTION -DCRYPTO_BACKEND=$CRYPTO_BACKEND -DBUILD_SHARED_LIBS=$BUILD_SHARED_LIBS -DENABLE_ZLIB_COMPRESSION=$ENABLE_ZLIB_COMPRESSION .. && cmake --build . && CTEST_OUTPUT_ON_FAILURE=1 cmake --build . --target test && cmake --build . --target package
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@ -1,101 +0,0 @@
-# Copyright (c) 2014, 2015  Alexander Lamaison <alexander.lamaison@gmail.com>
-#
-# Redistribution and use in source and binary forms,
-# with or without modification, are permitted provided
-# that the following conditions are met:
-#
-#   Redistributions of source code must retain the above
-#   copyright notice, this list of conditions and the
-#   following disclaimer.
-#
-#   Redistributions in binary form must reproduce the above
-#   copyright notice, this list of conditions and the following
-#   disclaimer in the documentation and/or other materials
-#   provided with the distribution.
-#
-#   Neither the name of the copyright holder nor the names
-#   of any other contributors may be used to endorse or
-#   promote products derived from this software without
-#   specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
-# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
-# OF SUCH DAMAGE.
-
-cmake_minimum_required(VERSION 2.8.11)
-
-set(CMAKE_MODULE_PATH ${CMAKE_CURRENT_SOURCE_DIR}/cmake)
-
-project(libssh2 C)
-set(PROJECT_URL "https://www.libssh2.org/")
-set(PROJECT_DESCRIPTION "The SSH library")
-
-option(BUILD_SHARED_LIBS "Build Shared Libraries" OFF)
-
-# Parse version
-
-file(READ ${CMAKE_CURRENT_SOURCE_DIR}/include/libssh2.h _HEADER_CONTENTS)
-string(
-  REGEX REPLACE ".*#define LIBSSH2_VERSION[ \t]+\"([^\"]+)\".*" "\\1"
-  LIBSSH2_VERSION "${_HEADER_CONTENTS}")
-string(
-  REGEX REPLACE ".*#define LIBSSH2_VERSION_MAJOR[ \t]+([0-9]+).*" "\\1"
-  LIBSSH2_VERSION_MAJOR "${_HEADER_CONTENTS}")
-string(
-  REGEX REPLACE ".*#define LIBSSH2_VERSION_MINOR[ \t]+([0-9]+).*" "\\1"
-  LIBSSH2_VERSION_MINOR "${_HEADER_CONTENTS}")
-string(
-  REGEX REPLACE ".*#define LIBSSH2_VERSION_PATCH[ \t]+([0-9]+).*" "\\1"
-  LIBSSH2_VERSION_PATCH "${_HEADER_CONTENTS}")
-
-if(NOT LIBSSH2_VERSION OR
-   NOT LIBSSH2_VERSION_MAJOR MATCHES "^[0-9]+$" OR
-   NOT LIBSSH2_VERSION_MINOR MATCHES "^[0-9]+$" OR
-   NOT LIBSSH2_VERSION_PATCH MATCHES "^[0-9]+$")
-  message(
-    FATAL_ERROR
-    "Unable to parse version from"
-    "${CMAKE_CURRENT_SOURCE_DIR}/include/libssh2.h")
-endif()
-
-include(GNUInstallDirs)
-install(
-  FILES docs/AUTHORS COPYING docs/HACKING README RELEASE-NOTES NEWS
-  DESTINATION ${CMAKE_INSTALL_DOCDIR})
-
-include(max_warnings)
-include(FeatureSummary)
-
-add_subdirectory(src)
-
-option(BUILD_EXAMPLES "Build libssh2 examples" ON)
-if(BUILD_EXAMPLES)
-  add_subdirectory(example)
-endif()
-
-option(BUILD_TESTING "Build libssh2 test suite" ON)
-if(BUILD_TESTING)
-  enable_testing()
-  add_subdirectory(tests)
-endif()
-
-add_subdirectory(docs)
-
-feature_summary(WHAT ALL)
-
-set(CPACK_PACKAGE_VERSION_MAJOR ${LIBSSH2_VERSION_MAJOR})
-set(CPACK_PACKAGE_VERSION_MINOR ${LIBSSH2_VERSION_MINOR})
-set(CPACK_PACKAGE_VERSION_PATCH ${LIBSSH2_VERSION_PATCH})
-set(CPACK_PACKAGE_VERSION ${LIBSSH2_VERSION})
-include(CPack)
--- a/42
+++ b/42
@ -1,42 +0,0 @@
-/* Copyright (c) 2004-2007 Sara Golemon <sarag@libssh2.org>
- * Copyright (c) 2005,2006 Mikhail Gusarov <dottedmag@dottedmag.net>
- * Copyright (c) 2006-2007 The Written Word, Inc.
- * Copyright (c) 2007 Eli Fant <elifantu@mail.ru>
- * Copyright (c) 2009-2014 Daniel Stenberg
- * Copyright (C) 2008, 2009 Simon Josefsson
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms,
- * with or without modification, are permitted provided
- * that the following conditions are met:
- *
- *   Redistributions of source code must retain the above
- *   copyright notice, this list of conditions and the
- *   following disclaimer.
- *
- *   Redistributions in binary form must reproduce the above
- *   copyright notice, this list of conditions and the following
- *   disclaimer in the documentation and/or other materials
- *   provided with the distribution.
- *
- *   Neither the name of the copyright holder nor the names
- *   of any other contributors may be used to endorse or
- *   promote products derived from this software without
- *   specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- */
-
--- a/9
+++ b/9
@ -0,0 +1,9 @@
+Installing libssh2
+==================
+
+ * Untar this tarball (which, if you're reading this, you've already done)
+
+ * Run: ./configure (passing additional options as desired)
+
+ * Run: make all install
+
--- a/src/comp.h
+++ b/src/comp.h
@ -1,7 +1,5 @@
-#ifndef __LIBSSH2_COMP_H
-#define __LIBSSH2_COMP_H
-
-/* Copyright (C) 2009-2010 by Daniel Stenberg
+/* Copyright (c) 2004, Sara Golemon <sarag@users.sourceforge.net>
+ * All rights reserved.
 *
 * Redistribution and use in source and binary forms,
 * with or without modification, are permitted provided
@ -35,11 +33,5 @@
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
 * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
 * OF SUCH DAMAGE.
- *
 */

-#include "libssh2_priv.h"
-
-const LIBSSH2_COMP_METHOD **_libssh2_comp_methods(LIBSSH2_SESSION *session);
-
-#endif /* __LIBSSH2_COMP_H */
--- a/Makefile.OpenSSL.inc
+++ b/Makefile.OpenSSL.inc
@ -1,2 +0,0 @@
-CRYPTO_CSOURCES = openssl.c
-CRYPTO_HHEADERS = openssl.h
--- a/Makefile.WinCNG.inc
+++ b/Makefile.WinCNG.inc
@ -1,2 +0,0 @@
-CRYPTO_CSOURCES = wincng.c
-CRYPTO_HHEADERS = wincng.h
--- a/Makefile.am
+++ b/Makefile.am
@ -1,149 +0,0 @@
-AUTOMAKE_OPTIONS = foreign nostdinc
-
-SUBDIRS = src tests docs
-if BUILD_EXAMPLES
-SUBDIRS += example
-endif
-
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = libssh2.pc
-
-include_HEADERS =			\
-	include/libssh2.h		\
-	include/libssh2_publickey.h	\
-	include/libssh2_sftp.h
-
-NETWAREFILES =  nw/keepscreen.c \
-	nw/nwlib.c \
-	nw/GNUmakefile \
-	nw/test/GNUmakefile
-
-DSP = win32/libssh2.dsp
-VCPROJ = win32/libssh2.vcproj
-
-DISTCLEANFILES = $(DSP)
-
-VMSFILES = vms/libssh2_make_example.dcl vms/libssh2_make_help.dcl	\
-vms/libssh2_make_kit.dcl vms/libssh2_make_lib.dcl vms/man2help.c	\
-vms/readme.vms vms/libssh2_config.h
-
-WIN32FILES = win32/GNUmakefile win32/test/GNUmakefile		\
-win32/libssh2_config.h win32/config.mk win32/rules.mk		\
-win32/Makefile.Watcom win32/libssh2.dsw win32/tests.dsp $(DSP)	\
-win32/msvcproj.head win32/msvcproj.foot win32/libssh2.rc
-
-OS400FILES = os400/README400 os400/initscript.sh os400/make.sh		\
-os400/make-src.sh os400/make-rpg.sh os400/make-include.sh		\
-os400/os400sys.c os400/ccsid.c						\
-os400/libssh2_config.h os400/macros.h os400/libssh2_ccsid.h		\
-os400/include/alloca.h os400/include/sys/socket.h os400/include/stdio.h	\
-os400/libssh2rpg/libssh2.rpgle.in					\
-os400/libssh2rpg/libssh2_ccsid.rpgle.in					\
-os400/libssh2rpg/libssh2_publickey.rpgle				\
-os400/libssh2rpg/libssh2_sftp.rpgle					\
-Makefile.os400qc3.inc
-
-EXTRA_DIST = $(WIN32FILES) buildconf $(NETWAREFILES) get_ver.awk \
- maketgz NMakefile RELEASE-NOTES libssh2.pc.in $(VMSFILES) config.rpath \
- CMakeLists.txt cmake $(OS400FILES)
-
-ACLOCAL_AMFLAGS = -I m4
-
-.PHONY: ChangeLog
-ChangeLog:
-	echo "see NEWS" > ./ChangeLog
-DISTCLEANFILES += ChangeLog
-
-dist-hook:
-	rm -rf $(top_builddir)/tests/log
-	find $(distdir) -name "*.dist" -exec rm {} \;
-	(distit=`find $(srcdir) -name "*.dist"`; \
-	for file in $$distit; do \
-	  strip=`echo $$file | sed -e s/^$(srcdir)// -e s/\.dist//`; \
-	  cp $$file $(distdir)$$strip; \
-	done)
-
-# Code Coverage
-
-init-coverage:
-	make clean
-	lcov --directory . --zerocounters
-
-COVERAGE_CCOPTS ?= "-g --coverage"
-COVERAGE_OUT ?= docs/coverage
-
-build-coverage:
-	make CFLAGS=$(COVERAGE_CCOPTS) check
-	mkdir -p $(COVERAGE_OUT)
-	lcov --directory . --output-file $(COVERAGE_OUT)/$(PACKAGE).info \
-		--capture
-
-gen-coverage:
-	genhtml --output-directory $(COVERAGE_OUT) \
-		$(COVERAGE_OUT)/$(PACKAGE).info \
-		--highlight --frames --legend \
-		--title "$(PACKAGE_NAME)"
-
-coverage: init-coverage build-coverage gen-coverage
-
-# DSP/VCPROJ generation adapted from libcurl
-# only OpenSSL and WinCNG are supported with this build system
-CRYPTO_CSOURCES = openssl.c wincng.c
-CRYPTO_HHEADERS = openssl.h wincng.h
-# Makefile.inc provides the CSOURCES and HHEADERS defines
-include Makefile.inc
-
-WIN32SOURCES = $(CSOURCES)
-WIN32HEADERS = $(HHEADERS) libssh2_config.h
-
-$(DSP): win32/msvcproj.head win32/msvcproj.foot Makefile.am
-	echo "creating $(DSP)"
-	@( (cat $(srcdir)/win32/msvcproj.head; \
-	echo "# Begin Group \"Source Files\""; \
-	echo ""; \
-	echo "# PROP Default_Filter \"cpp;c;cxx\""; \
-	win32_srcs='$(WIN32SOURCES)'; \
-	sorted_srcs=`for file in $$win32_srcs; do echo $$file; done | sort`; \
-	for file in $$sorted_srcs; do \
-		echo "# Begin Source File"; \
-		echo ""; \
-		echo "SOURCE=..\\src\\"$$file; \
-		echo "# End Source File"; \
-	done; \
-	echo "# End Group"; \
-	echo "# Begin Group \"Header Files\""; \
-	echo ""; \
-	echo "# PROP Default_Filter \"h;hpp;hxx\""; \
-	win32_hdrs='$(WIN32HEADERS)'; \
-	sorted_hdrs=`for file in $$win32_hdrs; do echo $$file; done | sort`; \
-	for file in $$sorted_hdrs; do \
-		echo "# Begin Source File"; \
-		echo ""; \
-		if [ "$$file" == "libssh2_config.h" ]; \
-		then \
-			echo "SOURCE=.\\"$$file; \
-		else \
-			echo "SOURCE=..\\src\\"$$file; \
-		fi; \
-		echo "# End Source File"; \
-	done; \
-	echo "# End Group"; \
-	cat $(srcdir)/win32/msvcproj.foot) | \
-	awk '{printf("%s\r\n", gensub("\r", "", "g"))}' > $@ )
-
-$(VCPROJ): win32/vc8proj.head win32/vc8proj.foot Makefile.am
-	echo "creating $(VCPROJ)"
-	@( (cat $(srcdir)/vc8proj.head; \
-	win32_srcs='$(WIN32SOURCES)'; \
-	sorted_srcs=`for file in $$win32_srcs; do echo $$file; done | sort`; \
-	for file in $$sorted_srcs; do \
-		echo "<File RelativePath=\""..\src\$$file"\"></File>"; \
-	done; \
-	echo "</Filter><Filter	Name=\"Header Files\">"; \
-	win32_hdrs='$(WIN32HEADERS)'; \
-	sorted_hdrs=`for file in $$win32_hdrs; do echo $$file; done | sort`; \
-	for file in $$sorted_hdrs; do \
-		echo "<File RelativePath=\""..\src\$$file"\"></File>"; \
-	done; \
-	cat $(srcdir)/vc8proj.foot) | \
-	awk '{printf("%s\r\n", gensub("\r", "", "g"))}' > $@ )
--- a/Makefile.in
+++ b/Makefile.in
@ -0,0 +1,48 @@
+subdirs = src/
+top_srcdir = @top_srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+libdir = @exec_prefix@/lib
+incldir = @prefix@/include
+distdir = @top_srcdir@/dist
+
+CC = @CC@
+CFLAGS = -c @CFLAGS@ -Iinclude/ -Wall -g
+LIBS = -lssh2 -Lsrc/
+INSTALL = @INSTALL@
+VERSION=0.1
+DISTLIB=libssh2-$(VERSION)
+
+all:
+	@for dir in ${subdirs}; do \
+		(cd $$dir && $(MAKE) all) \
+		|| case "$(MFLAGS)" in *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+	$(CC) -o ssh2_sample.o ssh2_sample.c $(CFLAGS)
+	$(CC) -o ssh2_sample ssh2_sample.o $(LIBS)
+install:
+	$(top_srcdir)/mkinstalldirs $(incldir)
+	$(top_srcdir)/mkinstalldirs $(libdir)
+	@for dir in ${subdirs}; do \
+		(cd $$dir && $(MAKE) install) \
+		|| case "$(MFLAGS)" in *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+	$(INSTALL) -m 644 include/libssh2.h $(incldir)/
+clean:
+	@for dir in ${subdirs}; do \
+		(cd $$dir && $(MAKE) clean) \
+		|| case "$(MFLAGS)" in *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+	rm -f ssh2_sample.o ssh2_sample
+dist:
+	autoheader
+	autoconf
+	rm -f $(DISTLIB)
+	ln -s . $(DISTLIB)
+	tar -zcf $(DISTLIB).tar.gz \
+		$(DISTLIB)/configure $(DISTLIB)/Makefile.in $(DISTLIB)/ssh2_sample.c \
+		$(DISTLIB)/LICENSE $(DISTLIB)/README $(DISTLIB)/TODO $(DISTLIB)/INSTALL \
+		$(DISTLIB)/mkinstalldirs $(DISTLIB)/install-sh \
+		$(DISTLIB)/src/*.c $(DISTLIB)/src/Makefile.in \
+		$(DISTLIB)/include/libssh2.h $(DISTLIB)/include/libssh2_priv.h $(DISTLIB)/include/libssh2_config.h.in
+	rm -f $(DISTLIB)
--- a/Makefile.inc
+++ b/Makefile.inc
@ -1,6 +0,0 @@
-CSOURCES = channel.c comp.c crypt.c hostkey.c kex.c mac.c misc.c \
- packet.c publickey.c scp.c session.c sftp.c userauth.c transport.c \
- version.c knownhost.c agent.c $(CRYPTO_CSOURCES) pem.c keepalive.c global.c
-
-HHEADERS = libssh2_priv.h $(CRYPTO_HHEADERS) transport.h channel.h comp.h \
- mac.h misc.h packet.h userauth.h session.h sftp.h crypto.h
--- a/Makefile.libgcrypt.inc
+++ b/Makefile.libgcrypt.inc
@ -1,2 +0,0 @@
-CRYPTO_CSOURCES = libgcrypt.c
-CRYPTO_HHEADERS = libgcrypt.h
--- a/Makefile.os400qc3.inc
+++ b/Makefile.os400qc3.inc
@ -1,2 +0,0 @@
-CRYPTO_CSOURCES = os400qc3.c
-CRYPTO_HHEADERS = os400qc3.h
--- a/3
+++ b/3
@ -1,3 +0,0 @@
-The old NEWS file.
-
-NEWS is now generated from git and put into the release tarballs.
--- a/33
+++ b/33
@ -1,33 +0,0 @@
-!include "win32/config.mk"
-
-!if "$(WITH_WINCNG)" == "1"
-!include "Makefile.WinCNG.inc"
-!else
-!include "Makefile.OpenSSL.inc"
-!endif
-!include "Makefile.inc"
-
-OBJECTS=$(CSOURCES:.c=.obj)
-
-# SUBDIRS=src example
-SUBDIRS=src
-
-all-sub: win32\objects.mk
-	-for %D in ($(SUBDIRS)) do $(MAKE) /nologo /f %D/NMakefile BUILD=$(BUILD) SUBDIR=%D all-sub
-
-clean: 
-	-rmdir 2>NUL /s/q $(TARGET)
-	-del 2>NUL win32\objects.mk
-
-real-clean vclean: clean
-	-del 2>NUL libssh2.dll
-	-del 2>NUL libssh2.exp
-	-del 2>NUL libssh2.ilk
-	-del 2>NUL libssh2.lib
-	-del 2>NUL *.pdb
-
-win32\objects.mk: Makefile.inc
-	@echo OBJECTS = \>$@
-	@for %O in ($(OBJECTS)) do @echo $$(INTDIR)\%O \>>$@
-	@echo $$(EOL)>>$@
-
--- a/25
+++ b/25
@ -1,19 +1,14 @@
 libssh2 - SSH2 library
 ======================

-libssh2 is a library implementing the SSH2 protocol, available under
-the revised BSD license.
+Version 0.1-dev
+---------------

-Web site: http://www.libssh2.org/
-
-Mailing list: http://cool.haxx.se/mailman/listinfo/libssh2-devel
-
-License: see COPYING
-
-Source code: https://github.com/libssh2/libssh2
-
-Web site source code: https://github.com/libssh2/www
-
-Installation instructions are in:
- - docs/INSTALL_CMAKE for CMake
- - docs/INSTALL_AUTOTOOLS for Autotools
+  Initial Release:
+    KEX methods: diffie-hellman-group14-sha1, diffie-hellman-group-exchange-sha1, diffie-hellman-group1-sha1
+    Hostkey methods: ssh-rsa, ssh-dss
+    Cipher methods: aes256-cbc, rijndael-cbc@lysator.liu.se, aes192-cbc, aes128-cbc, blowfish-cbc, arcfour, cast128-cbc, 3des-cbc, none*
+    Compression methods: zlib, none
+    MAC methods: hmac-sha1, hmac-sha1-96, hmac-ripemd160, hmac-ripemd160@openssh.com none*
+    *Cipher/MAC "none" is disabled by default for security purposes,
+     Use --enable-crypt-none and/or --enable-mac-none with ./configure to enable
--- a/56
+++ b/56
@ -1,56 +0,0 @@
-libssh2 1.7.0
-
-This release includes the following changes:
-
- o libssh2_session_set_last_error: Add function
- o mac: Add support for HMAC-SHA-256 and HMAC-SHA-512
- o WinCNG: support for SHA256/512 HMAC
- o kex: Added diffie-hellman-group-exchange-sha256 support
- o OS/400 crypto library QC3 support
-
-This release includes the following security advisory:
-
- o diffie_hellman_sha256: convert bytes to bits
-   CVE-2016-0787: http://www.libssh2.org/adv_20160223.html
-
-This release includes the following bugfixes:
-
- o SFTP: Increase speed and datasize in SFTP read
- o openssl: make libssh2_sha1 return error code
- o openssl: fix memleak in _libssh2_dsa_sha1_verify()
- o cmake: include CMake files in the release tarballs
- o Fix builds with Visual Studio 2015
- o hostkey.c: Fix compiling error when OPENSSL_NO_MD5 is defined
- o GNUmakefile: add support for LIBSSH2_LDFLAG_EXTRAS
- o GNUmakefile: add -m64 CFLAGS when targeting mingw64
- o kex: free server host key before allocating it (again)
- o SCP: add libssh2_scp_recv2 to support large (> 2GB) files on windows
- o channel: Detect bad usage of libssh2_channel_process_startup
- o userauth: Fix off by one error when reading public key file
- o kex: removed dupe entry from libssh2_kex_methods
- o _libssh2_error: Support allocating the error message
- o hostkey: fix invalid memory access if libssh2_dsa_new fails
- o hostkey: align code path of ssh_rsa_init to ssh_dss_init
- o libssh2.pc.in: fix the output of pkg-config --libs
- o wincng: fixed possible memory leak in _libssh2_wincng_hash
- o wincng: fixed _libssh2_wincng_hash_final return value
- o add OpenSSL 1.1.0-pre2 compatibility
- o agent_disconnect_unix: unset the agent fd after closing it
- o sftp: stop reading when buffer is full
- o sftp: Send at least one read request before reading
- o sftp: Don't return EAGAIN if data was written to buffer
- o sftp: Check read packet file offset
- o configure: build "silent" if possible
- o openssl: add OpenSSL 1.1.0-pre3-dev compatibility
- o GNUmakefile: list system libs after user libs
- 
-This release would not have looked like this without help, code, reports and
-advice from friends like these:
-
-  Alexander Lamaison, Andreas Schneider, brian m. carlson, Daniel Stenberg,
-  David Byron, Jakob Egger, Kamil Dudka, Marc Hoersken, Mizunashi Mana,
-  Patrick Monnerat, Paul Howarth, Salvador Fandino, Salvador Fandiño,
-  Salvador Fandiño, Viktor Szakats, Will Cosgrove,
-  (16 contributors)
-
-        Thanks! (and sorry if I forgot to mention someone)
--- a/4
+++ b/4
@ -0,0 +1,4 @@
+* More Crypt Methods
+* hmac-md5, hmac-md5-96
+* SFTP support
+* Review callbacks
--- a/acinclude.m4
+++ b/acinclude.m4
@ -1,384 +0,0 @@
-
-dnl **********************************************************************
-dnl CURL_DETECT_ICC ([ACTION-IF-YES])
-dnl
-dnl check if this is the Intel ICC compiler, and if so run the ACTION-IF-YES
-dnl sets the $ICC variable to "yes" or "no"
-dnl **********************************************************************
-AC_DEFUN([CURL_DETECT_ICC],
-[
-    ICC="no"
-    AC_MSG_CHECKING([for icc in use])
-    if test "$GCC" = "yes"; then
-       dnl check if this is icc acting as gcc in disguise
-       AC_EGREP_CPP([^__INTEL_COMPILER], [__INTEL_COMPILER],
-         dnl action if the text is found, this it has not been replaced by the
-         dnl cpp
-         ICC="no",
-         dnl the text was not found, it was replaced by the cpp
-         ICC="yes"
-         AC_MSG_RESULT([yes])
-         [$1]
-       )
-    fi
-    if test "$ICC" = "no"; then
-        # this is not ICC
-        AC_MSG_RESULT([no])
-    fi
-])
-
-dnl We create a function for detecting which compiler we use and then set as
-dnl pendantic compiler options as possible for that particular compiler. The
-dnl options are only used for debug-builds.
-
-AC_DEFUN([CURL_CC_DEBUG_OPTS],
-[
-    if test "z$ICC" = "z"; then
-      CURL_DETECT_ICC
-    fi
-
-    if test "$GCC" = "yes"; then
-
-       dnl figure out gcc version!
-       AC_MSG_CHECKING([gcc version])
-       gccver=`$CC -dumpversion`
-       num1=`echo $gccver | cut -d . -f1`
-       num2=`echo $gccver | cut -d . -f2`
-       gccnum=`(expr $num1 "*" 100 + $num2) 2>/dev/null`
-       AC_MSG_RESULT($gccver)
-
-       if test "$ICC" = "yes"; then
-         dnl this is icc, not gcc.
-
-         dnl ICC warnings we ignore:
-         dnl * 269 warns on our "%Od" printf formatters for curl_off_t output:
-         dnl   "invalid format string conversion"
-         dnl * 279 warns on static conditions in while expressions
-         dnl * 981 warns on "operands are evaluated in unspecified order"
-         dnl * 1418 "external definition with no prior declaration"
-         dnl * 1419 warns on "external declaration in primary source file"
-         dnl   which we know and do on purpose.
-
-         WARN="-wd279,269,981,1418,1419"
-
-         if test "$gccnum" -gt "600"; then
-            dnl icc 6.0 and older doesn't have the -Wall flag
-            WARN="-Wall $WARN"
-         fi
-       else dnl $ICC = yes
-         dnl this is a set of options we believe *ALL* gcc versions support:
-         WARN="-W -Wall -Wwrite-strings -pedantic -Wpointer-arith -Wnested-externs -Winline -Wmissing-prototypes"
-
-         dnl -Wcast-align is a bit too annoying on all gcc versions ;-)
-
-         if test "$gccnum" -ge "207"; then
-           dnl gcc 2.7 or later
-           WARN="$WARN -Wmissing-declarations"
-         fi
-
-         if test "$gccnum" -gt "295"; then
-           dnl only if the compiler is newer than 2.95 since we got lots of
-           dnl "`_POSIX_C_SOURCE' is not defined" in system headers with
-           dnl gcc 2.95.4 on FreeBSD 4.9!
-           WARN="$WARN -Wundef -Wno-long-long -Wsign-compare"
-         fi
-
-         if test "$gccnum" -ge "296"; then
-           dnl gcc 2.96 or later
-           WARN="$WARN -Wfloat-equal"
-         fi
-
-         if test "$gccnum" -gt "296"; then
-           dnl this option does not exist in 2.96
-           WARN="$WARN -Wno-format-nonliteral"
-         fi
-
-         dnl -Wunreachable-code seems totally unreliable on my gcc 3.3.2 on
-         dnl on i686-Linux as it gives us heaps with false positives.
-         dnl Also, on gcc 4.0.X it is totally unbearable and complains all
-         dnl over making it unusable for generic purposes. Let's not use it.
-
-         if test "$gccnum" -ge "303"; then
-           dnl gcc 3.3 and later
-           WARN="$WARN -Wendif-labels -Wstrict-prototypes"
-         fi
-
-         if test "$gccnum" -ge "304"; then
-           # try these on gcc 3.4
-           WARN="$WARN -Wdeclaration-after-statement"
-         fi
-
-         for flag in $CPPFLAGS; do
-           case "$flag" in
-            -I*)
-              dnl Include path, provide a -isystem option for the same dir
-              dnl to prevent warnings in those dirs. The -isystem was not very
-              dnl reliable on earlier gcc versions.
-              add=`echo $flag | sed 's/^-I/-isystem /g'`
-              WARN="$WARN $add"
-              ;;
-           esac
-         done
-
-       fi dnl $ICC = no
-
-       CFLAGS="$CFLAGS $WARN"
-
-      AC_MSG_NOTICE([Added this set of compiler options: $WARN])
-
-    else dnl $GCC = yes
-
-      AC_MSG_NOTICE([Added no extra compiler options])
-
-    fi dnl $GCC = yes
-
-    dnl strip off optimizer flags
-    NEWFLAGS=""
-    for flag in $CFLAGS; do
-      case "$flag" in
-      -O*)
-        dnl echo "cut off $flag"
-        ;;
-      *)
-        NEWFLAGS="$NEWFLAGS $flag"
-        ;;
-      esac
-    done
-    CFLAGS=$NEWFLAGS
-
-]) dnl end of AC_DEFUN()
-
-dnl CURL_CHECK_NONBLOCKING_SOCKET
-dnl -------------------------------------------------
-dnl Check for how to set a socket to non-blocking state. There seems to exist
-dnl four known different ways, with the one used almost everywhere being POSIX
-dnl and XPG3, while the other different ways for different systems (old BSD,
-dnl Windows and Amiga).
-dnl
-dnl There are two known platforms (AIX 3.x and SunOS 4.1.x) where the
-dnl O_NONBLOCK define is found but does not work. This condition is attempted
-dnl to get caught in this script by using an excessive number of #ifdefs...
-dnl
-AC_DEFUN([CURL_CHECK_NONBLOCKING_SOCKET],
-[
-  AC_MSG_CHECKING([non-blocking sockets style])
-
-  AC_TRY_COMPILE([
-/* headers for O_NONBLOCK test */
-#include <sys/types.h>
-#include <unistd.h>
-#include <fcntl.h>
-],[
-/* try to compile O_NONBLOCK */
-
-#if defined(sun) || defined(__sun__) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
-# if defined(__SVR4) || defined(__srv4__)
-#  define PLATFORM_SOLARIS
-# else
-#  define PLATFORM_SUNOS4
-# endif
-#endif
-#if (defined(_AIX) || defined(__xlC__)) && !defined(_AIX41)
-# define PLATFORM_AIX_V3
-#endif
-
-#if defined(PLATFORM_SUNOS4) || defined(PLATFORM_AIX_V3) || defined(__BEOS__)
-#error "O_NONBLOCK does not work on this platform"
-#endif
-  int socket;
-  int flags = fcntl(socket, F_SETFL, flags | O_NONBLOCK);
-],[
-dnl the O_NONBLOCK test was fine
-nonblock="O_NONBLOCK"
-AC_DEFINE(HAVE_O_NONBLOCK, 1, [use O_NONBLOCK for non-blocking sockets])
-],[
-dnl the code was bad, try a different program now, test 2
-
-  AC_TRY_COMPILE([
-/* headers for FIONBIO test */
-#include <unistd.h>
-#include <stropts.h>
-],[
-/* FIONBIO source test (old-style unix) */
- int socket;
- int flags = ioctl(socket, FIONBIO, &flags);
-],[
-dnl FIONBIO test was good
-nonblock="FIONBIO"
-AC_DEFINE(HAVE_FIONBIO, 1, [use FIONBIO for non-blocking sockets])
-],[
-dnl FIONBIO test was also bad
-dnl the code was bad, try a different program now, test 3
-
-  AC_TRY_COMPILE([
-/* headers for ioctlsocket test (Windows) */
-#undef inline
-#ifdef HAVE_WINDOWS_H
-#ifndef WIN32_LEAN_AND_MEAN
-#define WIN32_LEAN_AND_MEAN
-#endif
-#include <windows.h>
-#ifdef HAVE_WINSOCK2_H
-#include <winsock2.h>
-#else
-#ifdef HAVE_WINSOCK_H
-#include <winsock.h>
-#endif
-#endif
-#endif
-],[
-/* ioctlsocket source code */
- SOCKET sd;
- unsigned long flags = 0;
- sd = socket(0, 0, 0);
- ioctlsocket(sd, FIONBIO, &flags);
-],[
-dnl ioctlsocket test was good
-nonblock="ioctlsocket"
-AC_DEFINE(HAVE_IOCTLSOCKET, 1, [use ioctlsocket() for non-blocking sockets])
-],[
-dnl ioctlsocket didnt compile!, go to test 4
-
-  AC_TRY_LINK([
-/* headers for IoctlSocket test (Amiga?) */
-#include <sys/ioctl.h>
-],[
-/* IoctlSocket source code */
- int socket;
- int flags = IoctlSocket(socket, FIONBIO, (long)1);
-],[
-dnl ioctlsocket test was good
-nonblock="IoctlSocket"
-AC_DEFINE(HAVE_IOCTLSOCKET_CASE, 1, [use Ioctlsocket() for non-blocking sockets])
-],[
-dnl Ioctlsocket didnt compile, do test 5!
-  AC_TRY_COMPILE([
-/* headers for SO_NONBLOCK test (BeOS) */
-#include <socket.h>
-],[
-/* SO_NONBLOCK source code */
- long b = 1;
- int socket;
- int flags = setsockopt(socket, SOL_SOCKET, SO_NONBLOCK, &b, sizeof(b));
-],[
-dnl the SO_NONBLOCK test was good
-nonblock="SO_NONBLOCK"
-AC_DEFINE(HAVE_SO_NONBLOCK, 1, [use SO_NONBLOCK for non-blocking sockets])
-],[
-dnl test 5 didnt compile!
-nonblock="nada"
-AC_DEFINE(HAVE_DISABLED_NONBLOCKING, 1, [disabled non-blocking sockets])
-])
-dnl end of fifth test
-
-])
-dnl end of forth test
-
-])
-dnl end of third test
-
-])
-dnl end of second test
-
-])
-dnl end of non-blocking try-compile test
-  AC_MSG_RESULT($nonblock)
-
-  if test "$nonblock" = "nada"; then
-    AC_MSG_WARN([non-block sockets disabled])
-  fi
-])
-
-dnl CURL_CHECK_NEED_REENTRANT_SYSTEM
-dnl -------------------------------------------------
-dnl Checks if the preprocessor _REENTRANT definition
-dnl must be unconditionally done for this platform.
-dnl Internal macro for CURL_CONFIGURE_REENTRANT.
-
-AC_DEFUN([CURL_CHECK_NEED_REENTRANT_SYSTEM], [
-  case $host in
-    *-*-solaris* | *-*-hpux*)
-      tmp_need_reentrant="yes"
-      ;;
-    *)
-      tmp_need_reentrant="no"
-      ;;
-  esac
-])
-
-
-dnl CURL_CONFIGURE_FROM_NOW_ON_WITH_REENTRANT
-dnl -------------------------------------------------
-dnl This macro ensures that configuration tests done
-dnl after this will execute with preprocessor symbol
-dnl _REENTRANT defined. This macro also ensures that
-dnl the generated config file defines NEED_REENTRANT
-dnl and that in turn setup.h will define _REENTRANT.
-dnl Internal macro for CURL_CONFIGURE_REENTRANT.
-
-AC_DEFUN([CURL_CONFIGURE_FROM_NOW_ON_WITH_REENTRANT], [
-AC_DEFINE(NEED_REENTRANT, 1,
-  [Define to 1 if _REENTRANT preprocessor symbol must be defined.])
-cat >>confdefs.h <<_EOF
-#ifndef _REENTRANT
-#  define _REENTRANT
-#endif
-_EOF
-])
-
-
-dnl CURL_CONFIGURE_REENTRANT
-dnl -------------------------------------------------
-dnl This first checks if the preprocessor _REENTRANT
-dnl symbol is already defined. If it isn't currently
-dnl defined a set of checks are performed to verify
-dnl if its definition is required to make visible to
-dnl the compiler a set of *_r functions. Finally, if
-dnl _REENTRANT is already defined or needed it takes
-dnl care of making adjustments necessary to ensure
-dnl that it is defined equally for further configure
-dnl tests and generated config file.
-
-AC_DEFUN([CURL_CONFIGURE_REENTRANT], [
-  AC_PREREQ([2.50])dnl
-  #
-  AC_MSG_CHECKING([if _REENTRANT is already defined])
-  AC_COMPILE_IFELSE([
-    AC_LANG_PROGRAM([[
-    ]],[[
-#ifdef _REENTRANT
-      int dummy=1;
-#else
-      force compilation error
-#endif
-    ]])
-  ],[
-    AC_MSG_RESULT([yes])
-    tmp_reentrant_initially_defined="yes"
-  ],[
-    AC_MSG_RESULT([no])
-    tmp_reentrant_initially_defined="no"
-  ])
-  #
-  if test "$tmp_reentrant_initially_defined" = "no"; then
-    AC_MSG_CHECKING([if _REENTRANT is actually needed])
-    CURL_CHECK_NEED_REENTRANT_SYSTEM
-
-    if test "$tmp_need_reentrant" = "yes"; then
-      AC_MSG_RESULT([yes])
-    else
-      AC_MSG_RESULT([no])
-    fi
-  fi
-  #
-  AC_MSG_CHECKING([if _REENTRANT is onwards defined])
-  if test "$tmp_reentrant_initially_defined" = "yes" ||
-    test "$tmp_need_reentrant" = "yes"; then
-    CURL_CONFIGURE_FROM_NOW_ON_WITH_REENTRANT
-    AC_MSG_RESULT([yes])
-  else
-    AC_MSG_RESULT([no])
-  fi
-  #
-])
-
--- a/appveyor.yml
+++ b/appveyor.yml
@ -1,84 +0,0 @@
-# Copyright (c) 2014, Ruslan Baratov
-# Copyright (c) 2014, 2016 Alexander Lamaison
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#
-# * Redistributions of source code must retain the above copyright notice, this
-#   list of conditions and the following disclaimer.
-#
-# * Redistributions in binary form must reproduce the above copyright notice,
-#   this list of conditions and the following disclaimer in the documentation
-#   and/or other materials provided with the distribution.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-os: Visual Studio 2015
-
-environment:
-  matrix:
-    - GENERATOR: "Visual Studio 14 2015"
-      BUILD_SHARED_LIBS: ON
-
-    - GENERATOR: "Visual Studio 14 2015"
-      BUILD_SHARED_LIBS: OFF
-
-    - GENERATOR: "Visual Studio 12 2013"
-      BUILD_SHARED_LIBS: ON
-
-    - GENERATOR: "Visual Studio 12 2013"
-      BUILD_SHARED_LIBS: OFF
-
-    - GENERATOR: "Visual Studio 11 2012"
-      BUILD_SHARED_LIBS: ON
-
-    - GENERATOR: "Visual Studio 11 2012"
-      BUILD_SHARED_LIBS: OFF
-
-    - GENERATOR: "Visual Studio 10 2010"
-      BUILD_SHARED_LIBS: ON
-
-    - GENERATOR: "Visual Studio 10 2010"
-      BUILD_SHARED_LIBS: OFF
-
-    - GENERATOR: "Visual Studio 9 2008"
-      BUILD_SHARED_LIBS: ON
-
-    - GENERATOR: "Visual Studio 9 2008"
-      BUILD_SHARED_LIBS: OFF
-
-platform:
-  - x86
-  - x64
-
-configuration:
-# - Debug
-  - Release
-
-matrix:
-  allow_failures:
-    - GENERATOR: "Visual Studio 9 2008"
-      platform: x64
-
-build_script:
-  - ps: if($env:PLATFORM -eq "x64") { $env:CMAKE_GEN_SUFFIX=" Win64" }
-  - cmake "-G%GENERATOR%%CMAKE_GEN_SUFFIX%" -DBUILD_SHARED_LIBS=%BUILD_SHARED_LIBS% -H. -B_builds
-  - cmake --build _builds --config "%CONFIGURATION%"
-
-test_script:
-  - ps: cd _builds
-  - ctest -VV -C "%CONFIGURATION%" -E ssh2 --output-on-failure
-
-on_failure:
-  - ps: if (Test-Path _builds/CMakeFiles/CMakeOutput.log) { cat _builds/CMakeFiles/CMakeOutput.log }
-  - ps: if (Test-Path _builds/CMakeFiles/CMakeError.log) { cat _builds/CMakeFiles/CMakeError.log }
--- a/22
+++ b/22
@ -1,22 +0,0 @@
-#!/bin/sh
-
-LIBTOOLIZE="libtoolize"
-
-if [ "x`which $LIBTOOLIZE`" = "x" ]; then
-    LIBTOOLIZE="glibtoolize"
-fi
-
-if [ "x`which $LIBTOOLIZE`" = "x" ]; then
-    echo "Neither libtoolize nor glibtoolize could be found!"
-    exit 1
-fi
-
-${LIBTOOLIZE} --copy --automake --force
-${ACLOCAL:-aclocal} -I m4 $ACLOCAL_FLAGS
-${AUTOHEADER:-autoheader}
-# copy the private libssh2_config.h.in to the examples dir so that
-# it can be included without pointing the include path to the private
-# source dir
-cp src/libssh2_config.h.in example/libssh2_config.h.in
-${AUTOCONF:-autoconf}
-${AUTOMAKE:-automake} --add-missing --copy
--- a/cmake/CheckFunctionExistsMayNeedLibrary.cmake
+++ b/cmake/CheckFunctionExistsMayNeedLibrary.cmake
@ -1,81 +0,0 @@
-# Copyright (c) 2014 Alexander Lamaison <alexander.lamaison@gmail.com>
-#
-# Redistribution and use in source and binary forms,
-# with or without modification, are permitted provided
-# that the following conditions are met:
-#
-#   Redistributions of source code must retain the above
-#   copyright notice, this list of conditions and the
-#   following disclaimer.
-#
-#   Redistributions in binary form must reproduce the above
-#   copyright notice, this list of conditions and the following
-#   disclaimer in the documentation and/or other materials
-#   provided with the distribution.
-#
-#   Neither the name of the copyright holder nor the names
-#   of any other contributors may be used to endorse or
-#   promote products derived from this software without
-#   specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
-# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
-# OF SUCH DAMAGE.
-
-
-# - check_function_exists_maybe_need_library(<function> <var> [lib1 ... libn])
-#
-# Check if function is available for linking, first without extra libraries, and
-# then, if not found that way, linking in each optional library as well.  This
-# function is similar to autotools AC_SEARCH_LIBS.
-#
-# If the function if found, this will define <var>.
-#
-# If the function was only found by linking in an additional library, this
-# will define NEED_LIB_LIBX, where LIBX is the one of lib1 to libn that
-# makes the function available, in uppercase.
-#
-# The following variables may be set before calling this macro to
-# modify the way the check is run:
-#
-#  CMAKE_REQUIRED_FLAGS = string of compile command line flags
-#  CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
-#  CMAKE_REQUIRED_INCLUDES = list of include directories
-#  CMAKE_REQUIRED_LIBRARIES = list of libraries to link
-#
-
-include(CheckFunctionExists)
-include(CheckLibraryExists)
-
-function(check_function_exists_may_need_library function variable)
-
-  check_function_exists(${function} ${variable})
-
-  if(NOT ${variable})
-    foreach(lib ${ARGN})
-      string(TOUPPER ${lib} UP_LIB)
-      # Use new variable to prevent cache from previous step shortcircuiting
-      # new test
-      check_library_exists(${lib} ${function} "" HAVE_${function}_IN_${lib})
-      if(HAVE_${function}_IN_${lib})
-	set(${variable} 1 CACHE INTERNAL
-	  "Function ${function} found in library ${lib}")
-	set(NEED_LIB_${UP_LIB} 1 CACHE INTERNAL
-	  "Need to link ${lib}")
-	break()
-      endif()
-    endforeach()
-  endif()
-
-endfunction()
--- a/cmake/CheckNonblockingSocketSupport.cmake
+++ b/cmake/CheckNonblockingSocketSupport.cmake
@ -1,119 +0,0 @@
-include(CheckCSourceCompiles)
-
-# - check_nonblocking_socket_support()
-#
-# Check for how to set a socket to non-blocking state. There seems to exist
-# four known different ways, with the one used almost everywhere being POSIX
-# and XPG3, while the other different ways for different systems (old BSD,
-# Windows and Amiga).
-#
-# One of the following variables will be set indicating the supported
-# method (if any):
-#   HAVE_O_NONBLOCK
-#   HAVE_FIONBIO
-#   HAVE_IOCTLSOCKET
-#   HAVE_IOCTLSOCKET_CASE
-#   HAVE_SO_NONBLOCK
-#   HAVE_DISABLED_NONBLOCKING
-#
-# The following variables may be set before calling this macro to
-# modify the way the check is run:
-#
-#  CMAKE_REQUIRED_FLAGS = string of compile command line flags
-#  CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
-#  CMAKE_REQUIRED_INCLUDES = list of include directories
-#  CMAKE_REQUIRED_LIBRARIES = list of libraries to link
-#
-macro(check_nonblocking_socket_support)
-  # There are two known platforms (AIX 3.x and SunOS 4.1.x) where the
-  # O_NONBLOCK define is found but does not work.
-  check_c_source_compiles("
-#include <sys/types.h>
-#include <unistd.h>
-#include <fcntl.h>
-
-#if defined(sun) || defined(__sun__) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
-# if defined(__SVR4) || defined(__srv4__)
-#  define PLATFORM_SOLARIS
-# else
-#  define PLATFORM_SUNOS4
-# endif
-#endif
-#if (defined(_AIX) || defined(__xlC__)) && !defined(_AIX41)
-# define PLATFORM_AIX_V3
-#endif
-
-#if defined(PLATFORM_SUNOS4) || defined(PLATFORM_AIX_V3) || defined(__BEOS__)
-#error \"O_NONBLOCK does not work on this platform\"
-#endif
-
-int main()
-{
-    int socket;
-    int flags = fcntl(socket, F_SETFL, flags | O_NONBLOCK);
-}"
-  HAVE_O_NONBLOCK)
-
-  if(NOT HAVE_O_NONBLOCK)
-    check_c_source_compiles("/* FIONBIO test (old-style unix) */
-#include <unistd.h>
-#include <stropts.h>
-
-int main()
-{
-    int socket;
-    int flags = ioctl(socket, FIONBIO, &flags);
-}"
-    HAVE_FIONBIO)
-
-    if(NOT HAVE_FIONBIO)
-      check_c_source_compiles("/* ioctlsocket test (Windows) */
-#undef inline
-#ifndef WIN32_LEAN_AND_MEAN
-#define WIN32_LEAN_AND_MEAN
-#endif
-
-#include <windows.h>
-#include <winsock2.h>
-
-int main()
-{
-    SOCKET sd;
-    unsigned long flags = 0;
-    sd = socket(0, 0, 0);
-    ioctlsocket(sd, FIONBIO, &flags);
-}"
-      HAVE_IOCTLSOCKET)
-
-      if(NOT HAVE_IOCTLSOCKET)
-	check_c_source_compiles("/* IoctlSocket test (Amiga?) */
-#include <sys/ioctl.h>
-
-int main()
-{
-    int socket;
-    int flags = IoctlSocket(socket, FIONBIO, (long)1);
-}"
-        HAVE_IOCTLSOCKET_CASE)
-
-        if(NOT HAVE_IOCTLSOCKET_CASE)
-	  check_c_source_compiles("/* SO_NONBLOCK test (BeOS) */
-#include <socket.h>
-
-int main()
-{
-    long b = 1;
-    int socket;
-    int flags = setsockopt(socket, SOL_SOCKET, SO_NONBLOCK, &b, sizeof(b));
-}"
-          HAVE_SO_NONBLOCK)
-
-	  if(NOT HAVE_SO_NONBLOCK)
-	    # No non-blocking socket method found
-	    set(HAVE_DISABLED_NONBLOCKING 1)
-	  endif()
-	endif()
-      endif()
-    endif()
-  endif()
-endmacro()
--- a/cmake/CopyRuntimeDependencies.cmake
+++ b/cmake/CopyRuntimeDependencies.cmake
@ -1,72 +0,0 @@
-# Copyright (c) 2014 Alexander Lamaison <alexander.lamaison@gmail.com>
-#
-# Redistribution and use in source and binary forms,
-# with or without modification, are permitted provided
-# that the following conditions are met:
-#
-#   Redistributions of source code must retain the above
-#   copyright notice, this list of conditions and the
-#   following disclaimer.
-#
-#   Redistributions in binary form must reproduce the above
-#   copyright notice, this list of conditions and the following
-#   disclaimer in the documentation and/or other materials
-#   provided with the distribution.
-#
-#   Neither the name of the copyright holder nor the names
-#   of any other contributors may be used to endorse or
-#   promote products derived from this software without
-#   specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
-# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
-# OF SUCH DAMAGE.
-
-include(CMakeParseArguments)
-
-function(ADD_TARGET_TO_COPY_DEPENDENCIES)
-  set(options)
-  set(oneValueArgs TARGET)
-  set(multiValueArgs DEPENDENCIES BEFORE_TARGETS)
-  cmake_parse_arguments(COPY
-    "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
-
-  if(NOT COPY_DEPENDENCIES)
-    return()
-  endif()
-
-  # Using a custom target to drive custom commands stops multiple
-  # parallel builds trying to kick off the commands at the same time
-  add_custom_target(${COPY_TARGET})
-
-  foreach(target ${COPY_BEFORE_TARGETS})
-    add_dependencies(${target} ${COPY_TARGET})
-  endforeach()
-
-  foreach(dependency ${COPY_DEPENDENCIES})
-
-    add_custom_command(
-      TARGET ${COPY_TARGET}
-      DEPENDS ${dependency}
-      # Make directory first otherwise file is copied in place of
-      # directory instead of into it
-      COMMAND ${CMAKE_COMMAND}
-      ARGS -E make_directory ${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}
-      COMMAND ${CMAKE_COMMAND}
-      ARGS -E copy ${dependency} ${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}
-      VERBATIM)
-
-  endforeach()
-
-endfunction()
--- a/cmake/FindLibgcrypt.cmake
+++ b/cmake/FindLibgcrypt.cmake
@ -1,53 +0,0 @@
-# Copyright (c) 2014 Alexander Lamaison <alexander.lamaison@gmail.com>
-#
-# Redistribution and use in source and binary forms,
-# with or without modification, are permitted provided
-# that the following conditions are met:
-#
-#   Redistributions of source code must retain the above
-#   copyright notice, this list of conditions and the
-#   following disclaimer.
-#
-#   Redistributions in binary form must reproduce the above
-#   copyright notice, this list of conditions and the following
-#   disclaimer in the documentation and/or other materials
-#   provided with the distribution.
-#
-#   Neither the name of the copyright holder nor the names
-#   of any other contributors may be used to endorse or
-#   promote products derived from this software without
-#   specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
-# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
-# OF SUCH DAMAGE.
-
-# - Try to find Libgcrypt
-# This will define all or none of:
-#  LIBGCRYPT_FOUND - if Libgcrypt headers and library was found
-#  LIBGCRYPT_INCLUDE_DIRS - The Libgcrypt include directories
-#  LIBGCRYPT_LIBRARIES - The libraries needed to use Libgcrypt
-
-find_path(LIBGCRYPT_INCLUDE_DIR gcrypt.h)
-
-find_library(LIBGCRYPT_LIBRARY NAMES gcrypt libgcrypt)
-
-set(LIBGCRYPT_LIBRARIES ${LIBGCRYPT_LIBRARY})
-set(LIBGCRYPT_INCLUDE_DIRS ${LIBGCRYPT_INCLUDE_DIR})
-
-include(FindPackageHandleStandardArgs)
-find_package_handle_standard_args(Libgcrypt DEFAULT_MSG
-                                  LIBGCRYPT_LIBRARY LIBGCRYPT_INCLUDE_DIR)
-
-mark_as_advanced(LIBGCRYPT_INCLUDE_DIR LIBGCRYPT_LIBRARY)
--- a/cmake/SocketLibraries.cmake
+++ b/cmake/SocketLibraries.cmake
@ -1,64 +0,0 @@
-# Copyright (c) 2014 Alexander Lamaison <alexander.lamaison@gmail.com>
-#
-# Redistribution and use in source and binary forms,
-# with or without modification, are permitted provided
-# that the following conditions are met:
-#
-#   Redistributions of source code must retain the above
-#   copyright notice, this list of conditions and the
-#   following disclaimer.
-#
-#   Redistributions in binary form must reproduce the above
-#   copyright notice, this list of conditions and the following
-#   disclaimer in the documentation and/or other materials
-#   provided with the distribution.
-#
-#   Neither the name of the copyright holder nor the names
-#   of any other contributors may be used to endorse or
-#   promote products derived from this software without
-#   specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
-# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
-# OF SUCH DAMAGE.
-
-# Some systems have their socket functions in a library.
-# (Solaris -lsocket/-lnsl, Windows -lws2_32).  This macro appends those
-# libraries to the given list
-macro(append_needed_socket_libraries LIBRARIES_LIST)
-  if(CMAKE_SYSTEM_NAME STREQUAL "Windows" AND CMAKE_SIZEOF_VOID_P EQUAL 4)
-    # x86 Windows uses STDCALL for these functions, so their names are mangled,
-    # meaning the platform checks don't work. Hardcoding these until we get
-    # a better solution.
-    set(HAVE_SOCKET 1)
-    set(HAVE_SELECT 1)
-    set(HAVE_INET_ADDR 1)
-    set(NEED_LIB_WS2_32 1)
-  else()
-    check_function_exists_may_need_library(socket HAVE_SOCKET socket ws2_32)
-    check_function_exists_may_need_library(select HAVE_SELECT ws2_32)
-    check_function_exists_may_need_library(inet_addr HAVE_INET_ADDR nsl ws2_32)
-  endif()
-
-  if(NEED_LIB_SOCKET)
-    list(APPEND ${LIBRARIES_LIST} socket)
-  endif()
-  if(NEED_LIB_NSL)
-    list(APPEND ${LIBRARIES_LIST} nsl)
-  endif()
-  if(NEED_LIB_WS2_32)
-    list(APPEND ${LIBRARIES_LIST} ws2_32)
-  endif()
-
-endmacro()
--- a/cmake/Toolchain-Linux-32.cmake
+++ b/cmake/Toolchain-Linux-32.cmake
@ -1,42 +0,0 @@
-# Copyright (c) 2014 Alexander Lamaison <alexander.lamaison@gmail.com>
-#
-# Redistribution and use in source and binary forms,
-# with or without modification, are permitted provided
-# that the following conditions are met:
-#
-#   Redistributions of source code must retain the above
-#   copyright notice, this list of conditions and the
-#   following disclaimer.
-#
-#   Redistributions in binary form must reproduce the above
-#   copyright notice, this list of conditions and the following
-#   disclaimer in the documentation and/or other materials
-#   provided with the distribution.
-#
-#   Neither the name of the copyright holder nor the names
-#   of any other contributors may be used to endorse or
-#   promote products derived from this software without
-#   specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
-# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
-# OF SUCH DAMAGE.
-
-# Cross-compile 32-bit binary on 64-bit linux host
-set(CMAKE_SYSTEM_NAME Linux)
-set(CMAKE_SYSTEM_VERSION 1)
-set(CMAKE_SYSTEM_PROCESSOR "i386")
-
-set(CMAKE_CXX_COMPILER_ARG1 "-m32")
-set(CMAKE_C_COMPILER_ARG1 "-m32")
--- a/cmake/max_warnings.cmake
+++ b/cmake/max_warnings.cmake
@ -1,23 +0,0 @@
-if(MSVC)
-  # Use the highest warning level for visual studio.
-  if(CMAKE_CXX_FLAGS MATCHES "/W[0-4]")
-    string(REGEX REPLACE "/W[0-4]" "/W4" CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}")
-  else()
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W4")
-  endif()
-  if(CMAKE_C_FLAGS MATCHES "/W[0-4]")
-    string(REGEX REPLACE "/W[0-4]" "/W4" CMAKE_C_FLAGS "${CMAKE_C_FLAGS}")
-  else()
-    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /W4")
-  endif()
-
-  # Disable broken warnings
-  add_definitions(-D_CRT_SECURE_NO_WARNINGS -D_CRT_NONSTDC_NO_DEPRECATE)
-elseif(CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX)
-  if(NOT CMAKE_CXX_FLAGS MATCHES "-Wall")
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall")
-  endif()
-  if(NOT CMAKE_C_FLAGS MATCHES "-Wall")
-    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wall")
-  endif()
-endif()
--- a/config.rpath
+++ b/config.rpath
@ -1,660 +0,0 @@
-#! /bin/sh
-# Output a system dependent set of variables, describing how to set the
-# run time search path of shared libraries in an executable.
-#
-#   Copyright 1996-2006 Free Software Foundation, Inc.
-#   Taken from GNU libtool, 2001
-#   Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-#   This file is free software; the Free Software Foundation gives
-#   unlimited permission to copy and/or distribute it, with or without
-#   modifications, as long as this notice is preserved.
-#
-# The first argument passed to this file is the canonical host specification,
-#    CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or
-#    CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
-# should be set by the caller.
-#
-# The set of defined variables is at the end of this script.
-
-# Known limitations:
-# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
-#   than 256 bytes, otherwise the compiler driver will dump core. The only
-#   known workaround is to choose shorter directory names for the build
-#   directory and/or the installation directory.
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-shrext=.so
-
-host="$1"
-host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-# Code taken from libtool.m4's _LT_CC_BASENAME.
-
-for cc_temp in $CC""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
-
-# Code taken from libtool.m4's AC_LIBTOOL_PROG_COMPILER_PIC.
-
-wl=
-if test "$GCC" = yes; then
-  wl='-Wl,'
-else
-  case "$host_os" in
-    aix*)
-      wl='-Wl,'
-      ;;
-    darwin*)
-      case $cc_basename in
-        xlc*)
-          wl='-Wl,'
-          ;;
-      esac
-      ;;
-    mingw* | pw32* | os2*)
-      ;;
-    hpux9* | hpux10* | hpux11*)
-      wl='-Wl,'
-      ;;
-    irix5* | irix6* | nonstopux*)
-      wl='-Wl,'
-      ;;
-    newsos6)
-      ;;
-    linux*)
-      case $cc_basename in
-        icc* | ecc*)
-          wl='-Wl,'
-          ;;
-        pgcc | pgf77 | pgf90)
-          wl='-Wl,'
-          ;;
-        ccc*)
-          wl='-Wl,'
-          ;;
-        como)
-          wl='-lopt='
-          ;;
-        *)
-          case `$CC -V 2>&1 | sed 5q` in
-            *Sun\ C*)
-              wl='-Wl,'
-              ;;
-          esac
-          ;;
-      esac
-      ;;
-    osf3* | osf4* | osf5*)
-      wl='-Wl,'
-      ;;
-    sco3.2v5*)
-      ;;
-    solaris*)
-      wl='-Wl,'
-      ;;
-    sunos4*)
-      wl='-Qoption ld '
-      ;;
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-      wl='-Wl,'
-      ;;
-    sysv4*MP*)
-      ;;
-    unicos*)
-      wl='-Wl,'
-      ;;
-    uts4*)
-      ;;
-  esac
-fi
-
-# Code taken from libtool.m4's AC_LIBTOOL_PROG_LD_SHLIBS.
-
-hardcode_libdir_flag_spec=
-hardcode_libdir_separator=
-hardcode_direct=no
-hardcode_minus_L=no
-
-case "$host_os" in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-esac
-
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes; then
-  # Set some defaults for GNU ld with shared library support. These
-  # are reset later if shared libraries are not supported. Putting them
-  # here allows them to be overridden if necessary.
-  # Unlike libtool, we use -rpath here, not --rpath, since the documented
-  # option of GNU ld is called -rpath, not --rpath.
-  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-  case "$host_os" in
-    aix3* | aix4* | aix5*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-        ld_shlibs=no
-      fi
-      ;;
-    amigaos*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we cannot use
-      # them.
-      ld_shlibs=no
-      ;;
-    beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-        :
-      else
-        ld_shlibs=no
-      fi
-      ;;
-    cygwin* | mingw* | pw32*)
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec='-L$libdir'
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        :
-      else
-        ld_shlibs=no
-      fi
-      ;;
-    interix3*)
-      hardcode_direct=no
-      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-      ;;
-    linux*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-        :
-      else
-        ld_shlibs=no
-      fi
-      ;;
-    netbsd*)
-      ;;
-    solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-        ld_shlibs=no
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-        :
-      else
-        ld_shlibs=no
-      fi
-      ;;
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-          ld_shlibs=no
-          ;;
-        *)
-          if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-            hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-          else
-            ld_shlibs=no
-          fi
-          ;;
-      esac
-      ;;
-    sunos4*)
-      hardcode_direct=yes
-      ;;
-    *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-        :
-      else
-        ld_shlibs=no
-      fi
-      ;;
-  esac
-  if test "$ld_shlibs" = no; then
-    hardcode_libdir_flag_spec=
-  fi
-else
-  case "$host_os" in
-    aix3*)
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      hardcode_minus_L=yes
-      if test "$GCC" = yes; then
-        # Neither direct hardcoding nor static linking is supported with a
-        # broken collect2.
-        hardcode_direct=unsupported
-      fi
-      ;;
-    aix4* | aix5*)
-      if test "$host_cpu" = ia64; then
-        # On IA64, the linker does run time linking by default, so we don't
-        # have to do anything special.
-        aix_use_runtimelinking=no
-      else
-        aix_use_runtimelinking=no
-        # Test if we are trying to use run time linking or normal
-        # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-        # need to do runtime linking.
-        case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-          for ld_flag in $LDFLAGS; do
-            if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-              aix_use_runtimelinking=yes
-              break
-            fi
-          done
-          ;;
-        esac
-      fi
-      hardcode_direct=yes
-      hardcode_libdir_separator=':'
-      if test "$GCC" = yes; then
-        case $host_os in aix4.[012]|aix4.[012].*)
-          collect2name=`${CC} -print-prog-name=collect2`
-          if test -f "$collect2name" && \
-            strings "$collect2name" | grep resolve_lib_name >/dev/null
-          then
-            # We have reworked collect2
-            hardcode_direct=yes
-          else
-            # We have old collect2
-            hardcode_direct=unsupported
-            hardcode_minus_L=yes
-            hardcode_libdir_flag_spec='-L$libdir'
-            hardcode_libdir_separator=
-          fi
-          ;;
-        esac
-      fi
-      # Begin _LT_AC_SYS_LIBPATH_AIX.
-      echo 'int main () { return 0; }' > conftest.c
-      ${CC} ${LDFLAGS} conftest.c -o conftest
-      aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-      if test -z "$aix_libpath"; then
-        aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-      fi
-      if test -z "$aix_libpath"; then
-        aix_libpath="/usr/lib:/lib"
-      fi
-      rm -f conftest.c conftest
-      # End _LT_AC_SYS_LIBPATH_AIX.
-      if test "$aix_use_runtimelinking" = yes; then
-        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-      else
-        if test "$host_cpu" = ia64; then
-          hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-        else
-          hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-        fi
-      fi
-      ;;
-    amigaos*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-      # see comment about different semantics on the GNU ld section
-      ld_shlibs=no
-      ;;
-    bsdi[45]*)
-      ;;
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec=' '
-      libext=lib
-      ;;
-    darwin* | rhapsody*)
-      hardcode_direct=no
-      if test "$GCC" = yes ; then
-        :
-      else
-        case $cc_basename in
-          xlc*)
-            ;;
-          *)
-            ld_shlibs=no
-            ;;
-        esac
-      fi
-      ;;
-    dgux*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      ;;
-    freebsd1*)
-      ld_shlibs=no
-      ;;
-    freebsd2.2*)
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      ;;
-    freebsd2*)
-      hardcode_direct=yes
-      hardcode_minus_L=yes
-      ;;
-    freebsd* | kfreebsd*-gnu | dragonfly*)
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      ;;
-    hpux9*)
-      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator=:
-      hardcode_direct=yes
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      hardcode_minus_L=yes
-      ;;
-    hpux10*)
-      if test "$with_gnu_ld" = no; then
-        hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-        hardcode_libdir_separator=:
-        hardcode_direct=yes
-        # hardcode_minus_L: Not really in the search PATH,
-        # but as the default location of the library.
-        hardcode_minus_L=yes
-      fi
-      ;;
-    hpux11*)
-      if test "$with_gnu_ld" = no; then
-        hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-        hardcode_libdir_separator=:
-        case $host_cpu in
-          hppa*64*|ia64*)
-            hardcode_direct=no
-            ;;
-          *)
-            hardcode_direct=yes
-            # hardcode_minus_L: Not really in the search PATH,
-            # but as the default location of the library.
-            hardcode_minus_L=yes
-            ;;
-        esac
-      fi
-      ;;
-    irix5* | irix6* | nonstopux*)
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      ;;
-    netbsd*)
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      ;;
-    newsos6)
-      hardcode_direct=yes
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      ;;
-    openbsd*)
-      hardcode_direct=yes
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-        hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-      else
-        case "$host_os" in
-          openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-            hardcode_libdir_flag_spec='-R$libdir'
-            ;;
-          *)
-            hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-            ;;
-        esac
-      fi
-      ;;
-    os2*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-      ;;
-    osf3*)
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      ;;
-    osf4* | osf5*)
-      if test "$GCC" = yes; then
-        hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      else
-        # Both cc and cxx compiler support -rpath directly
-        hardcode_libdir_flag_spec='-rpath $libdir'
-      fi
-      hardcode_libdir_separator=:
-      ;;
-    solaris*)
-      hardcode_libdir_flag_spec='-R$libdir'
-      ;;
-    sunos4*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_direct=yes
-      hardcode_minus_L=yes
-      ;;
-    sysv4)
-      case $host_vendor in
-        sni)
-          hardcode_direct=yes # is this really true???
-          ;;
-        siemens)
-          hardcode_direct=no
-          ;;
-        motorola)
-          hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-          ;;
-      esac
-      ;;
-    sysv4.3*)
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-        ld_shlibs=yes
-      fi
-      ;;
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
-      ;;
-    sysv5* | sco3.2v5* | sco5v6*)
-      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-      hardcode_libdir_separator=':'
-      ;;
-    uts4*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      ;;
-    *)
-      ld_shlibs=no
-      ;;
-  esac
-fi
-
-# Check dynamic linker characteristics
-# Code taken from libtool.m4's AC_LIBTOOL_SYS_DYNAMIC_LINKER.
-# Unlike libtool.m4, here we don't care about _all_ names of the library, but
-# only about the one the linker finds when passed -lNAME. This is the last
-# element of library_names_spec in libtool.m4, or possibly two of them if the
-# linker has special search rules.
-library_names_spec=      # the last element of library_names_spec in libtool.m4
-libname_spec='lib$name'
-case "$host_os" in
-  aix3*)
-    library_names_spec='$libname.a'
-    ;;
-  aix4* | aix5*)
-    library_names_spec='$libname$shrext'
-    ;;
-  amigaos*)
-    library_names_spec='$libname.a'
-    ;;
-  beos*)
-    library_names_spec='$libname$shrext'
-    ;;
-  bsdi[45]*)
-    library_names_spec='$libname$shrext'
-    ;;
-  cygwin* | mingw* | pw32*)
-    shrext=.dll
-    library_names_spec='$libname.dll.a $libname.lib'
-    ;;
-  darwin* | rhapsody*)
-    shrext=.dylib
-    library_names_spec='$libname$shrext'
-    ;;
-  dgux*)
-    library_names_spec='$libname$shrext'
-    ;;
-  freebsd1*)
-    ;;
-  kfreebsd*-gnu)
-    library_names_spec='$libname$shrext'
-    ;;
-  freebsd* | dragonfly*)
-    case "$host_os" in
-      freebsd[123]*)
-        library_names_spec='$libname$shrext$versuffix' ;;
-      *)
-        library_names_spec='$libname$shrext' ;;
-    esac
-    ;;
-  gnu*)
-    library_names_spec='$libname$shrext'
-    ;;
-  hpux9* | hpux10* | hpux11*)
-    case $host_cpu in
-      ia64*)
-        shrext=.so
-        ;;
-      hppa*64*)
-        shrext=.sl
-        ;;
-      *)
-        shrext=.sl
-        ;;
-    esac
-    library_names_spec='$libname$shrext'
-    ;;
-  interix3*)
-    library_names_spec='$libname$shrext'
-    ;;
-  irix5* | irix6* | nonstopux*)
-    library_names_spec='$libname$shrext'
-    case "$host_os" in
-      irix5* | nonstopux*)
-        libsuff= shlibsuff=
-        ;;
-      *)
-        case $LD in
-          *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
-          *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
-          *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
-          *) libsuff= shlibsuff= ;;
-        esac
-        ;;
-    esac
-    ;;
-  linux*oldld* | linux*aout* | linux*coff*)
-    ;;
-  linux*)
-    library_names_spec='$libname$shrext'
-    ;;
-  knetbsd*-gnu)
-    library_names_spec='$libname$shrext'
-    ;;
-  netbsd*)
-    library_names_spec='$libname$shrext'
-    ;;
-  newsos6)
-    library_names_spec='$libname$shrext'
-    ;;
-  nto-qnx*)
-    library_names_spec='$libname$shrext'
-    ;;
-  openbsd*)
-    library_names_spec='$libname$shrext$versuffix'
-    ;;
-  os2*)
-    libname_spec='$name'
-    shrext=.dll
-    library_names_spec='$libname.a'
-    ;;
-  osf3* | osf4* | osf5*)
-    library_names_spec='$libname$shrext'
-    ;;
-  solaris*)
-    library_names_spec='$libname$shrext'
-    ;;
-  sunos4*)
-    library_names_spec='$libname$shrext$versuffix'
-    ;;
-  sysv4 | sysv4.3*)
-    library_names_spec='$libname$shrext'
-    ;;
-  sysv4*MP*)
-    library_names_spec='$libname$shrext'
-    ;;
-  sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-    library_names_spec='$libname$shrext'
-    ;;
-  uts4*)
-    library_names_spec='$libname$shrext'
-    ;;
-esac
-
-sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
-shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
-escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-
-LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
-
-# How to pass a linker flag through the compiler.
-wl="$escaped_wl"
-
-# Static library suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally "so").
-shlibext="$shlibext"
-
-# Format of library name prefix.
-libname_spec="$escaped_libname_spec"
-
-# Library names that the linker finds when passed -lNAME.
-library_names_spec="$escaped_library_names_spec"
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator="$hardcode_libdir_separator"
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct="$hardcode_direct"
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L="$hardcode_minus_L"
-
-EOF
--- a/configure.ac
+++ b/configure.ac
@ -1,404 +0,0 @@
-# AC_PREREQ(2.57)
-AC_INIT(libssh2, [-], libssh2-devel@cool.haxx.se)
-AC_CONFIG_MACRO_DIR([m4])
-AC_CONFIG_SRCDIR([src])
-AC_CONFIG_HEADERS([src/libssh2_config.h example/libssh2_config.h])
-AM_MAINTAINER_MODE
-m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
-
-dnl SED is needed by some of the tools
-AC_PATH_PROG( SED, sed, sed-was-not-found-by-configure,
-              $PATH:/usr/bin:/usr/local/bin)
-AC_SUBST(SED)
-
-if test "x$SED" = "xsed-was-not-found-by-configure"; then
-  AC_MSG_WARN([sed was not found, this may ruin your chances to build fine])
-fi
-
-dnl figure out the libssh2 version
-LIBSSH2VER=`$SED -ne 's/^#define LIBSSH2_VERSION *"\(.*\)"/\1/p' ${srcdir}/include/libssh2.h`
-AM_INIT_AUTOMAKE
-AC_MSG_CHECKING([libssh2 version])
-AC_MSG_RESULT($LIBSSH2VER)
-
-AC_SUBST(LIBSSH2VER)
-
-AB_VERSION=$LIBSSH2VER
-
-AB_INIT
-
-# Check for the OS.
-# Daniel's note: this should not be necessary and we need to work to
-# get this removed.
-AC_CANONICAL_HOST
-case "$host" in
-    *-mingw*)
-    CFLAGS="$CFLAGS -DLIBSSH2_WIN32"
-    LIBS="$LIBS -lws2_32"
-    ;;
-	*-cygwin)
-	CFLAGS="$CFLAGS -DLIBSSH2_WIN32"
-    ;;
-	*darwin*)
-	CFLAGS="$CFLAGS -DLIBSSH2_DARWIN"
-	;;
-    *hpux*)
-    ;;
-    *osf*)
-    CFLAGS="$CFLAGS -D_POSIX_PII_SOCKET"
-    ;;
-    *)
-    ;;
-esac
-
-AC_CHECK_TYPE(long long,
-   [AC_DEFINE(HAVE_LONGLONG, 1,
-      [Define to 1 if the compiler supports the 'long long' data type.])]
-   longlong="yes"
-)
-
-dnl Our configure and build reentrant settings
-CURL_CONFIGURE_REENTRANT
-
-# Some systems (Solaris?) have socket() in -lsocket.
-AC_SEARCH_LIBS(socket, socket)
-
-# Solaris has inet_addr() in -lnsl.
-AC_SEARCH_LIBS(inet_addr, nsl)
-
-AC_SUBST(LIBS)
-
-AC_PROG_CC
-AC_PROG_INSTALL
-AC_PROG_LN_S
-AC_PROG_MAKE_SET
-AC_PATH_PROGS(SSHD, [sshd], [],
-     [$PATH$PATH_SEPARATOR/usr/libexec$PATH_SEPARATOR]dnl
-     [/usr/sbin$PATH_SEPARATOR/usr/etc$PATH_SEPARATOR/etc])
-AM_CONDITIONAL(SSHD, test -n "$SSHD")
-AC_LIBTOOL_WIN32_DLL
-AC_PROG_LIBTOOL
-AC_C_BIGENDIAN
-
-dnl check for how to do large files
-AC_SYS_LARGEFILE
-
-# Configure parameters
-AC_ARG_WITH(openssl,
-  AC_HELP_STRING([--with-openssl],[Use OpenSSL for crypto]),
-  use_openssl=$withval,use_openssl=auto)
-AC_ARG_WITH(libgcrypt,
-  AC_HELP_STRING([--with-libgcrypt],[Use libgcrypt for crypto]),
-  use_libgcrypt=$withval,use_libgcrypt=auto)
-AC_ARG_WITH(wincng,
-  AC_HELP_STRING([--with-wincng],[Use Windows CNG for crypto]),
-  use_wincng=$withval,use_wincng=auto)
-AC_ARG_WITH(libz,
-  AC_HELP_STRING([--with-libz],[Use zlib for compression]),
-  use_libz=$withval,use_libz=auto)
-
-found_crypto=none
-support_clear_memory=no
-
-# Look for OpenSSL
-if test "$found_crypto" = "none" && test "$use_openssl" != "no"; then
-  AC_LIB_HAVE_LINKFLAGS([ssl], [crypto], [#include <openssl/ssl.h>])
-fi
-if test "$ac_cv_libssl" = "yes"; then
-  AC_DEFINE(LIBSSH2_OPENSSL, 1, [Use OpenSSL])
-  LIBSREQUIRED=libssl,libcrypto
-
-  # Not all OpenSSL have AES-CTR functions.
-  save_LIBS="$LIBS"
-  LIBS="$LIBS $LIBSSL"
-  AC_CHECK_FUNCS(EVP_aes_128_ctr)
-  LIBS="$save_LIBS"
-
-  found_crypto="OpenSSL (AES-CTR: ${ac_cv_func_EVP_aes_128_ctr:-N/A})"
-fi
-AM_CONDITIONAL(OPENSSL, test "$ac_cv_libssl" = "yes")
-
-# Look for libgcrypt
-if test "$found_crypto" = "none" && test "$use_libgcrypt" != "no"; then
-  AC_LIB_HAVE_LINKFLAGS([gcrypt], [], [#include <gcrypt.h>])
-fi
-if test "$ac_cv_libgcrypt" = "yes"; then
-  AC_DEFINE(LIBSSH2_LIBGCRYPT, 1, [Use libgcrypt])
-  LIBSREQUIRED= # libgcrypt doesn't provide a .pc file. sad face.
-  LIBS="$LIBS -lgcrypt"
-  found_crypto=libgcrypt
-fi
-AM_CONDITIONAL(LIBGCRYPT, test "$ac_cv_libgcrypt" = "yes")
-
-# Look for Windows Cryptography API: Next Generation
-if test "$found_crypto" = "none" && test "$use_wincng" != "no"; then
-  AC_LIB_HAVE_LINKFLAGS([bcrypt], [], [
-    #include <windows.h>
-    #include <bcrypt.h>
-  ])
-  AC_LIB_HAVE_LINKFLAGS([crypt32], [], [
-    #include <windows.h>
-    #include <wincrypt.h>
-  ])
-  AC_CHECK_HEADERS([ntdef.h ntstatus.h], [], [], [
-    #include <windows.h>
-  ])
-  AC_CHECK_DECLS([SecureZeroMemory], [], [], [
-    #include <windows.h>
-  ])
-fi
-if test "$ac_cv_libbcrypt" = "yes"; then
-  AC_DEFINE(LIBSSH2_WINCNG, 1, [Use Windows CNG])
-  LIBSREQUIRED= # wincng doesn't provide a .pc file. sad face.
-  LIBS="$LIBS -lbcrypt"
-  if test "$ac_cv_libcrypt32" = "yes"; then
-    LIBS="$LIBS -lcrypt32"
-  fi
-  found_crypto="Windows Cryptography API: Next Generation"
-  if test "$ac_cv_have_decl_SecureZeroMemory" = "yes"; then
-    support_clear_memory=yes
-  fi
-fi
-AM_CONDITIONAL(WINCNG, test "$ac_cv_libbcrypt" = "yes")
-
-AM_CONDITIONAL(OS400QC3, false)
-
-# Check if crypto library was found
-if test "$found_crypto" = "none"; then
-  AC_MSG_ERROR([No crypto library found!
-Try --with-libssl-prefix=PATH
- or --with-libgcrypt-prefix=PATH
- or --with-wincng on Windows\
-])
-fi
-
-# Look for Libz
-if test "$use_libz" != "no"; then
-  AC_LIB_HAVE_LINKFLAGS([z], [], [#include <zlib.h>])
-  if test "$ac_cv_libz" != yes; then
-    AC_MSG_NOTICE([Cannot find zlib, disabling compression])
-    AC_MSG_NOTICE([Try --with-libz-prefix=PATH if you know you have it])
-  else
-    AC_DEFINE(LIBSSH2_HAVE_ZLIB, 1, [Compile in zlib support])
-    if test "${LIBSREQUIRED}" != ""; then
-      LIBSREQUIRED="${LIBSREQUIRED},"
-    fi
-    LIBSREQUIRED="${LIBSREQUIRED}zlib"
-  fi
-fi
-
-AC_SUBST(LIBSREQUIRED)
-
-#
-# Optional Settings
-#
-AC_ARG_ENABLE(crypt-none,
-  AC_HELP_STRING([--enable-crypt-none],[Permit "none" cipher -- NOT RECOMMENDED]),
-  [AC_DEFINE(LIBSSH2_CRYPT_NONE, 1, [Enable "none" cipher -- NOT RECOMMENDED])])
-
-AC_ARG_ENABLE(mac-none,
-  AC_HELP_STRING([--enable-mac-none],[Permit "none" MAC -- NOT RECOMMENDED]),
-  [AC_DEFINE(LIBSSH2_MAC_NONE, 1, [Enable "none" MAC -- NOT RECOMMENDED])])
-
-AC_ARG_ENABLE(gex-new,
-  AC_HELP_STRING([--disable-gex-new],[Disable "new" diffie-hellman-group-exchange-sha1 method]),
-  [GEX_NEW=$enableval])
-if test "$GEX_NEW" != "no"; then
-  AC_DEFINE(LIBSSH2_DH_GEX_NEW, 1, [Enable newer diffie-hellman-group-exchange-sha1 syntax])
-fi
-
-AC_ARG_ENABLE(clear-memory,
-  AC_HELP_STRING([--disable-clear-memory],[Disable clearing of memory before being freed]),
-  [CLEAR_MEMORY=$enableval])
-if test "$CLEAR_MEMORY" != "no"; then
-  if test "$support_clear_memory" = "yes"; then
-    AC_DEFINE(LIBSSH2_CLEAR_MEMORY, 1, [Enable clearing of memory before being freed])
-    enable_clear_memory=yes
-  else
-    if test "$CLEAR_MEMORY" = "yes"; then
-      AC_MSG_ERROR([secure clearing/zeroing of memory is not supported by the selected crypto backend])
-    else
-      AC_MSG_WARN([secure clearing/zeroing of memory is not supported by the selected crypto backend])
-    fi
-    enable_clear_memory=unsupported
-  fi
-else
-  if test "$support_clear_memory" = "yes"; then
-    enable_clear_memory=no
-  else
-    AC_MSG_WARN([secure clearing/zeroing of memory is not supported by the selected crypto backend])
-    enable_clear_memory=unsupported
-  fi
-fi
-
-dnl ************************************************************
-dnl option to switch on compiler debug options
-dnl
-AC_MSG_CHECKING([whether to enable pedantic and debug compiler options])
-AC_ARG_ENABLE(debug,
-AC_HELP_STRING([--enable-debug],[Enable pedantic and debug options])
-AC_HELP_STRING([--disable-debug],[Disable debug options]),
-[ case "$enable_debug" in
-  no)
-       AC_MSG_RESULT(no)
-       ;;
-  *)   AC_MSG_RESULT(yes)
-    enable_debug=yes
-    CPPFLAGS="$CPPFLAGS -DLIBSSH2DEBUG"
-    CFLAGS="$CFLAGS -g"
-
-    dnl set compiler "debug" options to become more picky, and remove
-    dnl optimize options from CFLAGS
-    CURL_CC_DEBUG_OPTS
-       ;;
-  esac
- ],
-       enable_debug=no
-       AC_MSG_RESULT(no)
-)
-
-dnl ************************************************************
-dnl Enable hiding of internal symbols in library to reduce its size and
-dnl speed dynamic linking of applications.  This currently is only supported
-dnl on gcc >= 4.0 and SunPro C.
-dnl
-AC_MSG_CHECKING([whether to enable hidden symbols in the library])
-AC_ARG_ENABLE(hidden-symbols,
-AC_HELP_STRING([--enable-hidden-symbols],[Hide internal symbols in library])
-AC_HELP_STRING([--disable-hidden-symbols],[Leave all symbols with default visibility in library]),
-[ case "$enableval" in
-  no)
-       AC_MSG_RESULT(no)
-       ;;
-  *)
-       AC_MSG_CHECKING([whether $CC supports it])
-       if test "$GCC" = yes ; then
-         if $CC --help --verbose 2>&1 | grep fvisibility= > /dev/null ; then
-           AC_MSG_RESULT(yes)
-           AC_DEFINE(LIBSSH2_API, [__attribute__ ((visibility ("default")))], [to make a symbol visible])
-           CFLAGS="$CFLAGS -fvisibility=hidden"
-         else
-            AC_MSG_RESULT(no)
-          fi
-
-       else
-         dnl Test for SunPro cc
-         if $CC 2>&1 | grep flags >/dev/null && $CC -flags | grep xldscope= >/dev/null ; then
-           AC_MSG_RESULT(yes)
-           AC_DEFINE(LIBSSH2_API, [__global], [to make a symbol visible])
-           CFLAGS="$CFLAGS -xldscope=hidden"
-         else
-           AC_MSG_RESULT(no)
-         fi
-       fi
-       ;;
-  esac ],
-       AC_MSG_RESULT(no)
-)
-
-# Build example applications?
-AC_MSG_CHECKING([whether to build example applications])
-AC_ARG_ENABLE([examples-build],
-AC_HELP_STRING([--enable-examples-build], [Build example applications (this is the default)])
-AC_HELP_STRING([--disable-examples-build], [Do not build example applications]),
-[case "$enableval" in
-  no | false)
-    build_examples='no'
-    ;;
-  *)
-    build_examples='yes'
-    ;;
-esac], [build_examples='yes'])
-AC_MSG_RESULT($build_examples)
-AM_CONDITIONAL([BUILD_EXAMPLES], [test "x$build_examples" != "xno"])
-
-# Checks for header files.
-# AC_HEADER_STDC
-AC_CHECK_HEADERS([errno.h fcntl.h stdio.h stdlib.h unistd.h sys/uio.h])
-AC_CHECK_HEADERS([sys/select.h sys/socket.h sys/ioctl.h sys/time.h])
-AC_CHECK_HEADERS([arpa/inet.h netinet/in.h])
-AC_CHECK_HEADERS([sys/un.h], [have_sys_un_h=yes], [have_sys_un_h=no])
-AM_CONDITIONAL([HAVE_SYS_UN_H], test "x$have_sys_un_h" = xyes)
-
-case $host in
-  *-*-cygwin* | *-*-cegcc*)
-    # These are POSIX-like systems using BSD-like sockets API.
-    ;;
-  *)
-    AC_CHECK_HEADERS([windows.h winsock2.h ws2tcpip.h])
-    ;;
-esac
-
-case $host in
-  *darwin*|*interix*)
-    dnl poll() does not work on these platforms
-    dnl Interix: "does provide poll(), but the implementing developer must
-    dnl have been in a bad mood, because poll() only works on the /proc
-    dnl filesystem here"
-    dnl Mac OS X's poll has funny behaviors, like:
-    dnl not being able to do poll on no fildescriptors (10.3?)
-    dnl not being able to poll on some files (like anything in /dev)
-    dnl not having reliable timeout support
-    dnl inconsistent return of POLLHUP where other implementations give POLLIN
-    AC_MSG_NOTICE([poll use is disabled on this platform])
-    ;;
-  *)
-    AC_CHECK_FUNCS(poll)
-    ;;
-esac
-
-AC_CHECK_FUNCS(gettimeofday select strtoll)
-
-dnl Check for select() into ws2_32 for Msys/Mingw
-if test "$ac_cv_func_select" != "yes"; then
-  AC_MSG_CHECKING([for select in ws2_32])
-  AC_TRY_LINK([
-#ifdef HAVE_WINSOCK2_H
-#ifndef WIN32_LEAN_AND_MEAN
-#define WIN32_LEAN_AND_MEAN
-#endif
-#include <winsock2.h>
-#endif
-    ],[
-      select(0,(fd_set *)NULL,(fd_set *)NULL,(fd_set *)NULL,(struct timeval *)NULL);
-    ],[
-      AC_MSG_RESULT([yes])
-      HAVE_SELECT="1"
-      AC_DEFINE_UNQUOTED(HAVE_SELECT, 1,
-        [Define to 1 if you have the select function.])
-    ],[
-      AC_MSG_RESULT([no])
-  ])
-fi
-
-AC_FUNC_ALLOCA
-
-# Checks for typedefs, structures, and compiler characteristics.
-AC_C_CONST
-AC_C_INLINE
-
-CURL_CHECK_NONBLOCKING_SOCKET
-
-AC_CONFIG_FILES([Makefile
-                 src/Makefile
-                 tests/Makefile
-                 example/Makefile
-                 docs/Makefile
-                 libssh2.pc])
-AC_OUTPUT
-
-AC_MSG_NOTICE([summary of build options:
-
-  version:          ${LIBSSH2VER}
-  Host type:        ${host}
-  Install prefix:   ${prefix}
-  Compiler:         ${CC}
-  Compiler flags:   ${CFLAGS}
-  Library types:    Shared=${enable_shared}, Static=${enable_static}
-  Crypto library:   ${found_crypto}
-  Clear memory:     $enable_clear_memory
-  Debug build:      $enable_debug
-  Build examples:   $build_examples
-  Path to sshd:     $ac_cv_path_SSHD (only for self-tests)
-  zlib compression: $ac_cv_libz
-])
--- a/configure.in
+++ b/configure.in
@ -0,0 +1,150 @@
+# AC_PREREQ(2.57)
+AC_INIT(libssh2, 0.1 , pollita@php.net)
+AC_CONFIG_SRCDIR([src])
+AC_CONFIG_HEADER([include/libssh2_config.h])
+
+SHLIB_SUFFIX_NAME="so"
+SHLIB_LDFLAGS="-shared"
+
+AC_SUBST(SHLIB_SUFFIX_NAME)
+AC_SUBST(SHLIB_LDFLAGS)
+
+AC_PROG_CC
+AC_PROG_INSTALL
+AC_PROG_LN_S
+AC_PROG_MAKE_SET
+AC_PROG_RANLIB
+AC_C_BIGENDIAN
+if test -z "$PKG_CONFIG"; then
+  AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
+fi
+
+#
+# Look for OpenSSL
+#
+AC_ARG_WITH(openssl,
+  AC_HELP_STRING([--with-openssl=DIR],[Look for OpenSSL in PATH]),
+  [LIBSSH2_OPENSSL_DIR=$withval],[LIBSSH2_OPENSSL_DIR=yes])
+
+if test "$LIBSSH2_OPENSSL_DIR" = "no" || test "$LIBSSH2_OPENSSL_DIR" = "yes"; then
+  unset LIBSSH2_OPENSSL_DIR
+fi
+
+found_openssl=no
+unset OPENSSL_INCDIR
+unset OPENSSL_LIBDIR
+
+AC_MSG_CHECKING([for OpenSSL])
+
+# Explicit path given, use it rather than pkg-config
+if test ! -z "$LIBSSH2_OPENSSL_DIR"; then
+  found_openssl=yes
+  OPENSSL_LIBDIR=$LIBSSH2_OPENSSL_DIR/lib
+  OPENSSL_INCDIR=$LIBSSH2_OPENSSL_DIR/include
+  AC_MSG_RESULT([Using explicit path $LIBSSH2_OPENSSL_DIR])
+fi
+
+# If pkg-config is found try using it
+if test "$found_openssl" = "no" && test -x "$PKG_CONFIG" && $PKG_CONFIG --exists openssl; then
+  found_openssl=yes
+  OPENSSL_LIBDIR=`$PKG_CONFIG --libs openssl`
+  OPENSSL_INCDIR=`$PKG_CONFIG --variable=includedir openssl`
+  AC_MSG_RESULT([Using paths from pkg-config])
+fi
+
+# Elsewise, search for OpenSSL wherever it might be
+if test "$found_openssl" = "no"; then
+  OPENSSL_SEARCH_PATH="/usr/local/ssl /usr/local /usr /usr/local/openssl"
+
+  for i in $OPENSSL_SEARCH_PATH; do
+    if test -r $i/include/openssl/evp.h; then
+      OPENSSL_INCDIR=$i/include
+    fi
+    if test -r $i/include/openssl/hmac.h; then
+      OPENSSL_INCDIR=$i/include
+    fi
+    if test -r $i/lib/libcrypto.a -o -r $i/lib/libcrypto.$SHLIB_SUFFIX_NAME; then
+      OPENSSL_LIBDIR=$i/lib
+    fi
+    test -n "$OPENSSL_INCDIR" && test -n "$OPENSSL_LIBDIR" && break
+  done
+
+  if test -z "$OPENSSL_INCDIR"; then
+    AC_MSG_ERROR([Cannot find OpenSSL's <evp.h> or <hmac.h>])
+  fi
+
+  if test -z "$OPENSSL_LIBDIR"; then
+    AC_MSG_ERROR([Cannot find OpenSSL's libcrypto])
+  fi
+
+  AC_MSG_RESULT([$OPENSSL_INCDIR $OPENSSL_LIBDIR])
+fi
+
+#
+# Confirm required OpenSSL libs
+#
+if test ! -r $OPENSSL_INCDIR/openssl/bn.h || test ! -r $OPENSSL_INCDIR/openssl/evp.h || \
+   test ! -r $OPENSSL_INCDIR/openssl/hmac.h || test ! -r $OPENSSL_INCDIR/openssl/pem.h || \
+   test ! -r $OPENSSL_INCDIR/openssl/sha.h; then
+     AC_MSG_ERROR([Missing one or more of <openssl/bn.h>, <openssl/evp.h>, <openssl/hmac.h>, <openssl/pem.h>, <openssl/sha.h>])
+fi
+
+CFLAGS="$CFLAGS -I$OPENSSL_INCDIR"
+LDFLAGS="$LDFLAGS -L$OPENSSL_LIBDIR -lcrypto"
+
+#
+# zlib
+#
+AC_ARG_WITH(libz,
+  AC_HELP_STRING([--with-libz=PATH],[Look for libz in PATH]),
+  [LIBSSH2_LIBZ_DIR=$withval],[LIBSSH2_LIBZ_DIR="/usr/local /usr /usr/local/libz /usr/libz /usr/local/zlib /usr/zlib"])
+
+if test "$LIBSSH2_LIBZ_DIR" = "no" || test "$LIBSSH2_LIBZ_DIR" = "yes"; then
+  unset LIBSSH2_LIBZ_DIR
+fi
+
+unset LIBZ_INCDIR
+unset LIBZ_LIBDIR
+
+AC_MSG_CHECKING([for libz])
+
+for i in $LIBSSH2_LIBZ_DIR; do
+  if test -r $i/include/zlib.h; then
+    LIBZ_INCDIR=$i/include
+  fi
+  if test -r $i/lib/libz.a -o -r $i/lib/libz.$SHLIB_SUFFIX_NAME; then
+    LIBZ_LIBDIR=$i/lib
+  fi
+  test -n "$LIBZ_INCDIR" && test -n "$LIBZ_LIBDIR" && break
+done
+
+if test -n "$LIBZ_INCDIR" && test -n "$LIBZ_LIBDIR"; then
+  AC_MSG_RESULT([Found in $LIBZ_INCDIR $LIBZ_LIBDIR])
+  CFLAGS="$CFLAGS -I$LIBZ_INCDIR"
+  LDFLAGS="$LDFLAGS -L$LIBZ_LIBDIR -lz"
+  AC_DEFINE(LIBSSH2_HAVE_ZLIB, 1, [Compile in zlib support])
+else
+  AC_MSG_RESULT([Cannot find libz's <zlib.h>])
+fi
+
+#
+# Optional Settings
+#
+AC_ARG_ENABLE(crypt-none,
+  AC_HELP_STRING([--enable-crypt-none],[Permit "none" cipher -- NOT RECOMMENDED]),
+  [AC_DEFINE(LIBSSH2_CRYPT_NONE, 1, [Enable "none" cipher -- NOT RECOMMENDED])])
+
+AC_ARG_ENABLE(mac-none,
+  AC_HELP_STRING([--enable-mac-none],[Permit "none" MAC -- NOT RECOMMENDED]),
+  [AC_DEFINE(LIBSSH2_MAC_NONE, 1, [Enable "none" MAC -- NOT RECOMMENDED])])
+
+# Checks for header files.
+# AC_HEADER_STDC
+AC_CHECK_HEADERS([errno.h fcntl.h stdio.h stdlib.h unistd.h])
+
+# Checks for typedefs, structures, and compiler characteristics.
+AC_C_CONST
+
+AC_CONFIG_FILES([Makefile
+                 src/Makefile])
+AC_OUTPUT
--- a/docs/.gitignore
+++ b/docs/.gitignore
@ -1,3 +0,0 @@
-Makefile
-Makefile.in
-coverage
--- a/docs/AUTHORS
+++ b/docs/AUTHORS
@ -1,79 +0,0 @@
- libssh2 is the result of many friendly people. This list is an attempt to
- mention all contributors. If we've missed anyone, tell us!
-
- This list of names is a-z sorted.
-
-Adam Gobiowski
-Alexander Holyapin
-Alexander Lamaison
-Alfred Gebert
-Ben Kibbey
-Bjorn Stenborg
-Carlo Bramini
-Cristian Rodríguez
-Daiki Ueno
-Dan Casey
-Dan Fandrich
-Daniel Stenberg
-Dave Hayden
-Dave McCaldon
-David J Sullivan
-David Robins
-Dmitry Smirnov
-Douglas Masterson
-Edink Kadribasic
-Erik Brossler
-Francois Dupoux
-Gellule Xg
-Grubsky Grigory
-Guenter Knauf
-Heiner Steven
-Henrik Nordstrom
-James Housleys
-Jasmeet Bagga
-Jean-Louis Charton
-Jernej Kovacic
-Joey Degges
-John Little
-Jose Baars
-Jussi Mononen
-Kamil Dudka
-Lars Nordin
-Mark McPherson
-Mark Smith
-Markus Moeller
-Matt Lilley
-Matthew Booth
-Maxime Larocque
-Mike Protts
-Mikhail Gusarov
-Neil Gierman
-Olivier Hervieu
-Paul Howarth
-Paul Querna
-Paul Veldkamp
-Peter Krempa
-Peter O'Gorman
-Peter Stuge
-Pierre Joye
-Rafael Kitover
-Romain Bondue
-Sara Golemon
-Satish Mittal
-Sean Peterson
-Selcuk Gueney
-Simon Hart
-Simon Josefsson
-Sofian Brabez
-Steven Ayre
-Steven Dake
-Steven Van Ingelgem
-TJ Saunders
-Tommy Lindgren
-Tor Arntsen
-Vincent Jaulin
-Vincent Torri
-Vlad Grachov
-Wez Furlong
-Yang Tse
-Zl Liu
--- a/docs/BINDINGS
+++ b/docs/BINDINGS
@ -1,29 +0,0 @@
-
-Creative people have written bindings or interfaces for various environments
-and programming languages. Using one of these bindings allows you to take
-advantage of libssh2 directly from within your favourite language.
-
-The bindings listed below are not part of the libssh2 distribution archives,
-but must be downloaded and installed separately.
-
-Cocoa/Objective-C
-  https://github.com/karelia/libssh2_sftp-Cocoa-wrapper
-
-Haskell
-  FFI bindings - http://hackage.haskell.org/package/libssh2
-
-Perl
-  Net::SSH2 - http://search.cpan.org/~rkitover/Net-SSH2-0.45/lib/Net/SSH2.pm
-
-PHP
-  ssh2 - http://pecl.php.net/package/ssh2 
-
-Python
-  pylibssh2 - http://www.wallix.org/pylibssh2-project/
-
-Python-ctypes
-
-  PySsh2 - https://github.com/gellule/PySsh2
-
-Ruby
-  libssh2-ruby - https://github.com/mitchellh/libssh2-ruby
--- a/docs/CMakeLists.txt
+++ b/docs/CMakeLists.txt
@ -1,206 +0,0 @@
-# Copyright (c) 2014 Alexander Lamaison <alexander.lamaison@gmail.com>
-#
-# Redistribution and use in source and binary forms,
-# with or without modification, are permitted provided
-# that the following conditions are met:
-#
-#   Redistributions of source code must retain the above
-#   copyright notice, this list of conditions and the
-#   following disclaimer.
-#
-#   Redistributions in binary form must reproduce the above
-#   copyright notice, this list of conditions and the following
-#   disclaimer in the documentation and/or other materials
-#   provided with the distribution.
-#
-#   Neither the name of the copyright holder nor the names
-#   of any other contributors may be used to endorse or
-#   promote products derived from this software without
-#   specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
-# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
-# OF SUCH DAMAGE.
-
-set(MAN_PAGES
-  libssh2_agent_connect.3
-  libssh2_agent_disconnect.3
-  libssh2_agent_free.3
-  libssh2_agent_get_identity.3
-  libssh2_agent_init.3
-  libssh2_agent_list_identities.3
-  libssh2_agent_userauth.3
-  libssh2_banner_set.3
-  libssh2_base64_decode.3
-  libssh2_channel_close.3
-  libssh2_channel_direct_tcpip.3
-  libssh2_channel_direct_tcpip_ex.3
-  libssh2_channel_eof.3
-  libssh2_channel_exec.3
-  libssh2_channel_flush.3
-  libssh2_channel_flush_ex.3
-  libssh2_channel_flush_stderr.3
-  libssh2_channel_forward_accept.3
-  libssh2_channel_forward_cancel.3
-  libssh2_channel_forward_listen.3
-  libssh2_channel_forward_listen_ex.3
-  libssh2_channel_free.3
-  libssh2_channel_get_exit_signal.3
-  libssh2_channel_get_exit_status.3
-  libssh2_channel_handle_extended_data.3
-  libssh2_channel_handle_extended_data2.3
-  libssh2_channel_ignore_extended_data.3
-  libssh2_channel_open_ex.3
-  libssh2_channel_open_session.3
-  libssh2_channel_process_startup.3
-  libssh2_channel_read.3
-  libssh2_channel_read_ex.3
-  libssh2_channel_read_stderr.3
-  libssh2_channel_receive_window_adjust.3
-  libssh2_channel_receive_window_adjust2.3
-  libssh2_channel_request_pty.3
-  libssh2_channel_request_pty_ex.3
-  libssh2_channel_request_pty_size.3
-  libssh2_channel_request_pty_size_ex.3
-  libssh2_channel_send_eof.3
-  libssh2_channel_set_blocking.3
-  libssh2_channel_setenv.3
-  libssh2_channel_setenv_ex.3
-  libssh2_channel_shell.3
-  libssh2_channel_subsystem.3
-  libssh2_channel_wait_closed.3
-  libssh2_channel_wait_eof.3
-  libssh2_channel_window_read.3
-  libssh2_channel_window_read_ex.3
-  libssh2_channel_window_write.3
-  libssh2_channel_window_write_ex.3
-  libssh2_channel_write.3
-  libssh2_channel_write_ex.3
-  libssh2_channel_write_stderr.3
-  libssh2_channel_x11_req.3
-  libssh2_channel_x11_req_ex.3
-  libssh2_exit.3
-  libssh2_free.3
-  libssh2_hostkey_hash.3
-  libssh2_init.3
-  libssh2_keepalive_config.3
-  libssh2_keepalive_send.3
-  libssh2_knownhost_add.3
-  libssh2_knownhost_addc.3
-  libssh2_knownhost_check.3
-  libssh2_knownhost_checkp.3
-  libssh2_knownhost_del.3
-  libssh2_knownhost_free.3
-  libssh2_knownhost_get.3
-  libssh2_knownhost_init.3
-  libssh2_knownhost_readfile.3
-  libssh2_knownhost_readline.3
-  libssh2_knownhost_writefile.3
-  libssh2_knownhost_writeline.3
-  libssh2_poll.3
-  libssh2_poll_channel_read.3
-  libssh2_publickey_add.3
-  libssh2_publickey_add_ex.3
-  libssh2_publickey_init.3
-  libssh2_publickey_list_fetch.3
-  libssh2_publickey_list_free.3
-  libssh2_publickey_remove.3
-  libssh2_publickey_remove_ex.3
-  libssh2_publickey_shutdown.3
-  libssh2_scp_recv.3
-  libssh2_scp_recv2.3
-  libssh2_scp_send.3
-  libssh2_scp_send64.3
-  libssh2_scp_send_ex.3
-  libssh2_session_abstract.3
-  libssh2_session_banner_get.3
-  libssh2_session_banner_set.3
-  libssh2_session_block_directions.3
-  libssh2_session_callback_set.3
-  libssh2_session_disconnect.3
-  libssh2_session_disconnect_ex.3
-  libssh2_session_flag.3
-  libssh2_session_free.3
-  libssh2_session_get_blocking.3
-  libssh2_session_get_timeout.3
-  libssh2_session_hostkey.3
-  libssh2_session_init.3
-  libssh2_session_init_ex.3
-  libssh2_session_last_errno.3
-  libssh2_session_last_error.3
-  libssh2_session_set_last_error.3
-  libssh2_session_method_pref.3
-  libssh2_session_methods.3
-  libssh2_session_set_blocking.3
-  libssh2_session_set_timeout.3
-  libssh2_session_startup.3
-  libssh2_session_supported_algs.3
-  libssh2_sftp_close.3
-  libssh2_sftp_close_handle.3
-  libssh2_sftp_closedir.3
-  libssh2_sftp_fsetstat.3
-  libssh2_sftp_fstat.3
-  libssh2_sftp_fstat_ex.3
-  libssh2_sftp_fstatvfs.3
-  libssh2_sftp_fsync.3
-  libssh2_sftp_get_channel.3
-  libssh2_sftp_init.3
-  libssh2_sftp_last_error.3
-  libssh2_sftp_lstat.3
-  libssh2_sftp_mkdir.3
-  libssh2_sftp_mkdir_ex.3
-  libssh2_sftp_open.3
-  libssh2_sftp_open_ex.3
-  libssh2_sftp_opendir.3
-  libssh2_sftp_read.3
-  libssh2_sftp_readdir.3
-  libssh2_sftp_readdir_ex.3
-  libssh2_sftp_readlink.3
-  libssh2_sftp_realpath.3
-  libssh2_sftp_rename.3
-  libssh2_sftp_rename_ex.3
-  libssh2_sftp_rewind.3
-  libssh2_sftp_rmdir.3
-  libssh2_sftp_rmdir_ex.3
-  libssh2_sftp_seek.3
-  libssh2_sftp_seek64.3
-  libssh2_sftp_setstat.3
-  libssh2_sftp_shutdown.3
-  libssh2_sftp_stat.3
-  libssh2_sftp_stat_ex.3
-  libssh2_sftp_statvfs.3
-  libssh2_sftp_symlink.3
-  libssh2_sftp_symlink_ex.3
-  libssh2_sftp_tell.3
-  libssh2_sftp_tell64.3
-  libssh2_sftp_unlink.3
-  libssh2_sftp_unlink_ex.3
-  libssh2_sftp_write.3
-  libssh2_trace.3
-  libssh2_trace_sethandler.3
-  libssh2_userauth_authenticated.3
-  libssh2_userauth_hostbased_fromfile.3
-  libssh2_userauth_hostbased_fromfile_ex.3
-  libssh2_userauth_keyboard_interactive.3
-  libssh2_userauth_keyboard_interactive_ex.3
-  libssh2_userauth_list.3
-  libssh2_userauth_password.3
-  libssh2_userauth_password_ex.3
-  libssh2_userauth_publickey.3
-  libssh2_userauth_publickey_fromfile.3
-  libssh2_userauth_publickey_fromfile_ex.3
-  libssh2_version.3)
-
-include(GNUInstallDirs)
-install(FILES ${MAN_PAGES} DESTINATION ${CMAKE_INSTALL_MANDIR}/man3)
--- a/docs/HACKING
+++ b/docs/HACKING
@ -1,13 +0,0 @@
-
-libssh2 source code style guide:
-
- - 4 level indent
- - spaces-only (no tabs)
- - open braces on the if/for line:
-
-     if (banana) {
-         go_nuts();
-     }
-
- - keep source lines shorter than 80 columns
- - See libssh2-style.el for how to achieve this within Emacs
--- a/docs/HACKING.CRYPTO
+++ b/docs/HACKING.CRYPTO
@ -1,593 +0,0 @@
-	Definitions needed to implement a specific crypto library
-
-This document offers some hints about implementing a new crypto library
-interface.
-
-A crypto library interface consists of at least a header file, defining
-entities referenced from the libssh2 core modules.
-Real code implementation (if needed), is left at the implementor's choice.
-
-This document lists the entities that must/may be defined in the header file.
-
-Procedures listed as "void" may indeed have a result type: the void indication
-indicates the libssh2 core modules never use the function result.
-
-
-1) Crypto library initialization/termination.
-
-void libssh2_crypto_init(void);
-Initializes the crypto library. May be an empty macro if not needed.
-
-void libssh2_crypto_exit(void);
-Terminates the crypto library use. May be an empty macro if not needed.
-
-
-2) HMAC
-
-libssh2_hmac_ctx
-Type of an HMAC computation context. Generally a struct.
-Used for all hash algorithms.
-
-void libssh2_hmac_ctx_init(libssh2_hmac_ctx ctx);
-Initializes the HMAC computation context ctx.
-Called before setting-up the hash algorithm.
-Note: if the ctx parameter is modified by the underlying code,
-this procedure must be implemented as a macro to map ctx --> &ctx.
-
-void libssh2_hmac_update(libssh2_hmac_ctx ctx,
-	                 const unsigned char *data,
-	                 int datalen);
-Continue computation of an HMAC on datalen bytes at data using context ctx.
-Note: if the ctx parameter is modified by the underlying code,
-this procedure must be implemented as a macro to map ctx --> &ctx.
-
-void libssh2_hmac_final(libssh2_hmac_ctx ctx,
-	                unsigned char output[]);
-Get the computed HMAC from context ctx into the output buffer. The
-minimum data buffer size depends on the HMAC hash algorithm.
-Note: if the ctx parameter is modified by the underlying code,
-this procedure must be implemented as a macro to map ctx --> &ctx.
-
-void libssh2_hmac_cleanup(libssh2_hmac_ctx *ctx);
-Releases the HMAC computation context at ctx.
-
-
-3) Hash algorithms.
-
-3.1) SHA-1
-Must always be implemented.
-
-SHA_DIGEST_LENGTH
-#define to 20, the SHA-1 digest length.
-
-libssh2_sha1_ctx
-Type of an SHA1 computation context. Generally a struct.
-
-int libssh2_sha1_init(libssh2_sha1_ctx *x);
-Initializes the SHA-1 computation context at x.
-Returns 1 for success and 0 for failure
-
-void libssh2_sha1_update(libssh2_sha1_ctx ctx,
-	                 const unsigned char *data,
-	                 size_t len);
-Continue computation of SHA-1 on len bytes at data using context ctx.
-Note: if the ctx parameter is modified by the underlying code,
-this procedure must be implemented as a macro to map ctx --> &ctx.
-
-void libssh2_sha1_final(libssh2_sha1_ctx ctx,
-                        unsigned char output[SHA1_DIGEST_LEN]);
-Get the computed SHA-1 signature from context ctx and store it into the
-output buffer.
-Release the context.
-Note: if the ctx parameter is modified by the underlying code,
-this procedure must be implemented as a macro to map ctx --> &ctx.
-
-void libssh2_hmac_sha1_init(libssh2_hmac_ctx *ctx,
-	                    const void *key,
-	                    int keylen);
-Setup the HMAC computation context ctx for an HMAC-SHA-1 computation using the
-keylen-byte key. Is invoked just after libssh2_hmac_ctx_init().
-
-3.2) SHA-256
-Must always be implemented.
-
-SHA256_DIGEST_LENGTH
-#define to 32, the SHA-256 digest length.
-
-libssh2_sha256_ctx
-Type of an SHA-256 computation context. Generally a struct.
-
-int libssh2_sha256_init(libssh2_sha256_ctx *x);
-Initializes the SHA-256 computation context at x.
-Returns 1 for success and 0 for failure
-
-void libssh2_sha256_update(libssh2_sha256_ctx ctx,
-	                   const unsigned char *data,
-	                   size_t len);
-Continue computation of SHA-256 on len bytes at data using context ctx.
-Note: if the ctx parameter is modified by the underlying code,
-this procedure must be implemented as a macro to map ctx --> &ctx.
-
-void libssh2_sha256_final(libssh2_sha256_ctx ctx,
-	                  unsigned char output[SHA256_DIGEST_LENGTH]);
-Gets the computed SHA-256 signature from context ctx into the output buffer.
-Release the context.
-Note: if the ctx parameter is modified by the underlying code,
-this procedure must be implemented as a macro to map ctx --> &ctx.
-
-int libssh2_sha256(const unsigned char *message,
-                   unsigned long len,
-                   unsigned char output[SHA256_DIGEST_LENGTH]);
-Computes the SHA-256 signature over the given message of length len and
-store the result into the output buffer.
-Return 1 if error, else 0.
-Note: Seems unused in current code, but defined in each crypto library backend.
-
-LIBSSH2_HMAC_SHA256
-#define as 1 if the crypto library supports HMAC-SHA-256, else 0.
-If defined as 0, the rest of this section can be omitted.
-
-void libssh2_hmac_sha256_init(libssh2_hmac_ctx *ctx,
-	                      const void *key,
-	                      int keylen);
-Setup the HMAC computation context ctx for an HMAC-256 computation using the
-keylen-byte key. Is invoked just after libssh2_hmac_ctx_init().
-
-3.3) SHA-512
-LIBSSH2_HMAC_SHA512
-#define as 1 if the crypto library supports HMAC-SHA-512, else 0.
-If defined as 0, the rest of this section can be omitted.
-
-SHA512_DIGEST_LENGTH
-#define to 64, the SHA-512 digest length.
-
-void libssh2_hmac_sha512_init(libssh2_hmac_ctx *ctx,
-	                      const void *key,
-	                      int keylen);
-Setup the HMAC computation context ctx for an HMAC-512 computation using the
-keylen-byte key. Is invoked just after libssh2_hmac_ctx_init().
-
-3.4) MD5
-LIBSSH2_MD5
-#define to 1 if the crypto library supports MD5, else 0.
-If defined as 0, the rest of this section can be omitted.
-
-MD5_DIGEST_LENGTH
-#define to 16, the MD5 digest length.
-
-libssh2_md5_ctx
-Type of an MD5 computation context. Generally a struct.
-
-int libssh2_md5_init(libssh2_md5_ctx *x);
-Initializes the MD5 computation context at x.
-Returns 1 for success and 0 for failure
-
-void libssh2_md5_update(libssh2_md5_ctx ctx,
-	                const unsigned char *data,
-	                size_t len);
-Continues computation of MD5 on len bytes at data using context ctx.
-Returns 1 for success and 0 for failure.
-Note: if the ctx parameter is modified by the underlying code,
-this procedure must be implemented as a macro to map ctx --> &ctx.
-
-void libssh2_md5_final(libssh2_md5_ctx ctx,
-	               unsigned char output[MD5_DIGEST_LENGTH]);
-Gets the computed MD5 signature from context ctx into the output buffer.
-Release the context.
-Note: if the ctx parameter is modified by the underlying code,
-this procedure must be implemented as a macro to map ctx --> &ctx.
-
-void libssh2_hmac_md5_init(libssh2_hmac_ctx *ctx,
-	                   const void *key,
-	                   int keylen);
-Setup the HMAC computation context ctx for an HMAC-MD5 computation using the
-keylen-byte key. Is invoked just after libssh2_hmac_ctx_init().
-
-3.5) RIPEMD-160
-LIBSSH2_HMAC_RIPEMD
-#define as 1 if the crypto library supports HMAC-RIPEMD-160, else 0.
-If defined as 0, the rest of this section can be omitted.
-
-void libssh2_hmac_ripemd160_init(libssh2_hmac_ctx *ctx,
-	                         const void *key,
-	                         int keylen);
-Setup the HMAC computation context ctx for an HMAC-RIPEMD-160 computation using
-the keylen-byte key. Is invoked just after libssh2_hmac_ctx_init().
-Returns 1 for success and 0 for failure.
-
-
-4) Bidirectional Key ciphers.
-
-_libssh2_cipher_ctx
-Type of a cipher computation context.
-
-_libssh2_cipher_type(name);
-Macro defining name as storage identifying a cipher algorithm for
-the crypto library interface. No trailing semicolon.
-
-int _libssh2_cipher_init(_libssh2_cipher_ctx *h,
-                         _libssh2_cipher_type(algo),
-                         unsigned char *iv,
-                         unsigned char *secret,
-                         int encrypt);
-Creates a cipher context for the given algorithm with the initialization vector
-iv and the secret key secret. Prepare for encryption or decryption depending on
-encrypt.
-Return 0 if OK, else -1.
-This procedure is already prototyped in crypto.h.
-
-int _libssh2_cipher_crypt(_libssh2_cipher_ctx *ctx,
-                          _libssh2_cipher_type(algo),
-                          int encrypt,
-                          unsigned char *block,
-                          size_t blocksize);
-Encrypt or decrypt in-place data at (block, blocksize) using the given
-context and/or algorithm.
-Return 0 if OK, else -1.
-This procedure is already prototyped in crypto.h.
-
-void _libssh2_cipher_dtor(_libssh2_cipher_ctx *ctx);
-Release cipher context at ctx.
-
-4.1) AES
-4.1.1) AES in CBC block mode.
-LIBSSH2_AES
-#define as 1 if the crypto library supports AES in CBC mode, else 0.
-If defined as 0, the rest of this section can be omitted.
-
-_libssh2_cipher_aes128
-AES-128-CBC algorithm identifier initializer.
-#define with constant value of type _libssh2_cipher_type().
-
-_libssh2_cipher_aes192
-AES-192-CBC algorithm identifier initializer.
-#define with constant value of type _libssh2_cipher_type().
-
-_libssh2_cipher_aes256
-AES-256-CBC algorithm identifier initializer.
-#define with constant value of type _libssh2_cipher_type().
-
-4.1.2) AES in CTR block mode.
-LIBSSH2_AES_CTR
-#define as 1 if the crypto library supports AES in CTR mode, else 0.
-If defined as 0, the rest of this section can be omitted.
-
-void _libssh2_init_aes_ctr(void);
-Initialize static AES CTR ciphers.
-This procedure is already prototyped in crypto.h.
-
-_libssh2_cipher_aes128ctr
-AES-128-CTR algorithm identifier initializer.
-#define with constant value of type _libssh2_cipher_type().
-
-_libssh2_cipher_aes192ctr
-AES-192-CTR algorithm identifier initializer.
-#define with constant value of type _libssh2_cipher_type().
-
-_libssh2_cipher_aes256ctr
-AES-256-CTR algorithm identifier initializer.
-#define with constant value of type _libssh2_cipher_type().
-
-4.2) Blowfish in CBC block mode.
-LIBSSH2_BLOWFISH
-#define as 1 if the crypto library supports blowfish in CBC mode, else 0.
-If defined as 0, the rest of this section can be omitted.
-
-_libssh2_cipher_blowfish
-Blowfish-CBC algorithm identifier initializer.
-#define with constant value of type _libssh2_cipher_type().
-
-4.3) RC4.
-LIBSSH2_RC4
-#define as 1 if the crypto library supports RC4 (arcfour), else 0.
-If defined as 0, the rest of this section can be omitted.
-
-_libssh2_cipher_arcfour
-RC4 algorithm identifier initializer.
-#define with constant value of type _libssh2_cipher_type().
-
-4.4) CAST5 in CBC block mode.
-LIBSSH2_CAST
-#define 1 if the crypto library supports cast, else 0.
-If defined as 0, the rest of this section can be omitted.
-
-_libssh2_cipher_cast5
-CAST5-CBC algorithm identifier initializer.
-#define with constant value of type _libssh2_cipher_type().
-
-4.5) Tripple DES in CBC block mode.
-LIBSSH2_3DES
-#define as 1 if the crypto library supports TripleDES in CBC mode, else 0.
-If defined as 0, the rest of this section can be omitted.
-
-_libssh2_cipher_3des
-TripleDES-CBC algorithm identifier initializer.
-#define with constant value of type _libssh2_cipher_type().
-
-
-5) Big numbers.
-Positive multi-byte integers support is sufficient.
-
-5.1) Computation contexts.
-This has a real meaning if the big numbers computations need some context
-storage. If not, use a dummy type and functions (macros).
-
-_libssh2_bn_ctx
-Type of multiple precision computation context. May not be empty. if not used,
-#define as char, for example.
-
-libssh2_bn_ctx _libssh2_bn_ctx_new(void);
-Returns a new multiple precision computation context.
-
-void _libssh2_bn_ctx_free(_libssh2_bn_ctx ctx);
-Releases a multiple precision computation context.
-
-5.2) Computation support.
-_libssh2_bn
-Type of multiple precision numbers (aka bignumbers or huge integers) for the
-crypto library.
-
-_libssh2_bn * _libssh2_bn_init(void);
-Creates a multiple precision number (preset to zero).
-
-_libssh2_bn * _libssh2_bn_init_from_bin(void);
-Create a multiple precision number intended to be set by the
-_libssh2_bn_from_bin() function (see below). Unlike _libssh2_bn_init(), this
-code may be a dummy initializer if the _libssh2_bn_from_bin() actually
-allocates the number. Returns a value of type _libssh2_bn *.
-
-void _libssh2_bn_free(_libssh2_bn *bn);
-Destroys the multiple precision number at bn.
-
-unsigned long _libssh2_bn_bytes(libssh2_bn *bn);
-Get the number of bytes needed to store the bits of the multiple precision
-number at bn.
-
-unsigned long _libssh2_bn_bits(_libssh2_bn *bn);
-Returns the number of bits of multiple precision number at bn.
-
-int _libssh2_bn_set_word(_libssh2_bn *bn, unsigned long val);
-Sets the value of bn to val.
-Returns 1 on success, 0 otherwise.
-
-_libssh2_bn * _libssh2_bn_from_bin(_libssh2_bn *bn, int len,
-	                           const unsigned char *val);
-Converts the positive integer in big-endian form of length len at val
-into a _libssh2_bn and place it in bn. If bn is NULL, a new _libssh2_bn is
-created.
-Returns a pointer to target _libssh2_bn or NULL if error.
-
-int _libssh2_bn_to_bin(_libssh2_bn *bn, unsigned char *val);
-Converts the absolute value of bn into big-endian form and store it at
-val. val must point to _libssh2_bn_bytes(bn) bytes of memory.
-Returns the length of the big-endian number.
-
-void _libssh2_bn_rand(_libssh2_bn *bn, int bits, int top, int bottom);
-Generates a cryptographically strong pseudo-random number of bits in
-length and stores it in bn. If top is -1, the most significant bit of the
-random number can be zero. If top is 0, it is set to 1, and if top is 1, the
-two most significant bits of the number will be set to 1, so that the product
-of two such random numbers will always have 2*bits length. If bottom is true,
-the number will be odd.
-
-void _libssh2_bn_mod_exp(_libssh2_bn *r, _libssh2_bn *a,
-	                 _libssh2_bn *p, _libssh2_bn *m,
-	                 _libssh2_bn_ctx *ctx);
-Computes a to the p-th power modulo m and stores the result into r (r=a^p % m).
-May use the given context.
-
-
-6) Private key algorithms.
-Format of an RSA public key:
-a) "ssh-rsa".
-b) RSA exponent, MSB first, with high order bit = 0.
-c) RSA modulus, MSB first, with high order bit = 0.
-Each item is preceded by its 32-bit byte length, MSB first.
-
-Format of a DSA public key:
-a) "ssh-dss".
-b) p, MSB first, with high order bit = 0.
-c) q, MSB first, with high order bit = 0.
-d) g, MSB first, with high order bit = 0.
-e) pub_key, MSB first, with high order bit = 0.
-Each item is preceded by its 32-bit byte length, MSB first.
-
-int _libssh2_pub_priv_keyfile(LIBSSH2_SESSION *session,
-                              unsigned char **method,
-                              size_t *method_len,
-                              unsigned char **pubkeydata,
-                              size_t *pubkeydata_len,
-                              const char *privatekey,
-                              const char *passphrase);
-Reads a private key from file privatekey and extract the public key -->
-(pubkeydata, pubkeydata_len). Store the associated method (ssh-rsa or ssh-dss)
-into (method, method_len).
-Both buffers have to be allocated using LIBSSH2_ALLOC().
-Returns 0 if OK, else -1.
-This procedure is already prototyped in crypto.h.
-
-int _libssh2_pub_priv_keyfilememory(LIBSSH2_SESSION *session,
-                                    unsigned char **method,
-                                    size_t *method_len,
-                                    unsigned char **pubkeydata,
-                                    size_t *pubkeydata_len,
-                                    const char *privatekeydata,
-                                    size_t privatekeydata_len,
-                                    const char *passphrase);
-Gets a private key from bytes at (privatekeydata, privatekeydata_len) and
-extract the public key --> (pubkeydata, pubkeydata_len). Store the associated
-method (ssh-rsa or ssh-dss) into (method, method_len).
-Both buffers have to be allocated using LIBSSH2_ALLOC().
-Returns 0 if OK, else -1.
-This procedure is already prototyped in crypto.h.
-
-6.1) RSA
-LIBSSH2_RSA
-#define as 1 if the crypto library supports RSA, else 0.
-If defined as 0, the rest of this section can be omitted.
-
-libssh2_rsa_ctx
-Type of an RSA computation context. Generally a struct.
-
-int _libssh2_rsa_new(libssh2_rsa_ctx **rsa,
-                     const unsigned char *edata,
-                     unsigned long elen,
-                     const unsigned char *ndata,
-                     unsigned long nlen,
-                     const unsigned char *ddata,
-                     unsigned long dlen,
-                     const unsigned char *pdata,
-                     unsigned long plen,
-                     const unsigned char *qdata,
-                     unsigned long qlen,
-                     const unsigned char *e1data,
-                     unsigned long e1len,
-                     const unsigned char *e2data,
-                     unsigned long e2len,
-                     const unsigned char *coeffdata, unsigned long coefflen);
-Creates a new context for RSA computations from key source values:
-	pdata, plen	Prime number p. Only used if private key known (ddata).
-	qdata, qlen	Prime number q. Only used if private key known (ddata).
-	ndata, nlen	Modulus n.
-	edata, elen	Exponent e.
-	ddata, dlen	e^-1 % phi(n) = private key. May be NULL if unknown.
-	e1data, e1len	dp = d % (p-1). Only used if private key known (dtata).
-	e2data, e2len	dq = d % (q-1). Only used if private key known (dtata).
-	coeffdata, coefflen	q^-1 % p. Only used if private key known.
-Returns 0 if OK.
-This procedure is already prototyped in crypto.h.
-Note: the current generic code only calls this function with e and n (public
-key parameters): unless used internally by the backend, it is not needed to
-support the private key and the other parameters here.
-
-int _libssh2_rsa_new_private(libssh2_rsa_ctx **rsa,
-                             LIBSSH2_SESSION *session,
-                             const char *filename,
-                             unsigned const char *passphrase);
-Reads an RSA private key from file filename into a new RSA context.
-Must call _libssh2_init_if_needed().
-Return 0 if OK, else -1.
-This procedure is already prototyped in crypto.h.
-
-int _libssh2_rsa_new_private_frommemory(libssh2_rsa_ctx **rsa,
-                                        LIBSSH2_SESSION *session,
-                                        const char *data,
-					size_t data_len,
-                                        unsigned const char *passphrase);
-Gets an RSA private key from data into a new RSA context.
-Must call _libssh2_init_if_needed().
-Return 0 if OK, else -1.
-This procedure is already prototyped in crypto.h.
-
-int _libssh2_rsa_sha1_verify(libssh2_rsa_ctx *rsa,
-                             const unsigned char *sig,
-                             unsigned long sig_len,
-                             const unsigned char *m, unsigned long m_len);
-Verify (sig, siglen) signature of (m, m_len) using an SHA-1 hash and the
-RSA context.
-Return 0 if OK, else -1.
-This procedure is already prototyped in crypto.h.
-
-int _libssh2_rsa_sha1_signv(LIBSSH2_SESSION *session,
-	                    unsigned char **sig, size_t *siglen,
-	                    int count, const struct iovec vector[],
-	                    libssh2_rsa_ctx *ctx);
-RSA signs the SHA-1 hash computed over the count data chunks in vector.
-Signature is stored at (sig, siglen).
-Signature buffer must be allocated from the given session.
-Returns 0 if OK, else -1.
-Note: this procedure is optional: if provided, it MUST be defined as a macro.
-
-int _libssh2_rsa_sha1_sign(LIBSSH2_SESSION *session,
-                           libssh2_rsa_ctx *rsactx,
-                           const unsigned char *hash,
-                           size_t hash_len,
-                           unsigned char **signature,
-                           size_t *signature_len);
-RSA signs the (hash, hashlen) SHA-1 hash bytes and stores the allocated
-signature at (signature, signature_len).
-Signature buffer must be allocated from the given session.
-Returns 0 if OK, else -1.
-This procedure is already prototyped in crypto.h.
-Note: this procedure is not used if macro _libssh2_rsa_sha1_signv() is defined.
-
-void _libssh2_rsa_free(libssh2_rsa_ctx *rsactx);
-Releases the RSA computation context at rsactx.
-
-
-6.2) DSA
-LIBSSH2_DSA
-#define as 1 if the crypto library supports DSA, else 0.
-If defined as 0, the rest of this section can be omitted.
-
-
-libssh2_dsa_ctx
-Type of a DSA computation context. Generally a struct.
-
-int _libssh2_dsa_new(libssh2_dsa_ctx **dsa,
-                     const unsigned char *pdata,
-                     unsigned long plen,
-                     const unsigned char *qdata,
-                     unsigned long qlen,
-                     const unsigned char *gdata,
-                     unsigned long glen,
-                     const unsigned char *ydata,
-                     unsigned long ylen,
-                     const unsigned char *x, unsigned long x_len);
-Creates a new context for DSA computations from source key values:
-	pdata, plen	Prime number p. Only used if private key known (ddata).
-	qdata, qlen	Prime number q. Only used if private key known (ddata).
-	gdata, glen	G number.
-	ydata, ylen	Public key.
-	xdata, xlen	Private key. Only taken if xlen non-zero.
-Returns 0 if OK.
-This procedure is already prototyped in crypto.h.
-
-int _libssh2_dsa_new_private(libssh2_dsa_ctx **dsa,
-                             LIBSSH2_SESSION *session,
-                             const char *filename,
-                             unsigned const char *passphrase);
-Gets a DSA private key from file filename into a new DSA context.
-Must call _libssh2_init_if_needed().
-Return 0 if OK, else -1.
-This procedure is already prototyped in crypto.h.
-
-int _libssh2_dsa_new_private_frommemory(libssh2_dsa_ctx **dsa,
-                                        LIBSSH2_SESSION *session,
-                                        const char *data,
-					size_t data_len,
-                                        unsigned const char *passphrase);
-Gets a DSA private key from the data_len-bytes data into a new DSA context.
-Must call _libssh2_init_if_needed().
-Returns 0 if OK, else -1.
-This procedure is already prototyped in crypto.h.
-
-int _libssh2_dsa_sha1_verify(libssh2_dsa_ctx *dsactx,
-                             const unsigned char *sig,
-                             const unsigned char *m, unsigned long m_len);
-Verify (sig, siglen) signature of (m, m_len) using an SHA1 hash and the
-DSA context.
-Returns 0 if OK, else -1.
-This procedure is already prototyped in crypto.h.
-
-int _libssh2_dsa_sha1_sign(libssh2_dsa_ctx *dsactx,
-                           const unsigned char *hash,
-                           unsigned long hash_len, unsigned char *sig);
-DSA signs the (hash, hash_len) data using SHA-1 and store the signature at sig.
-Returns 0 if OK, else -1.
-This procedure is already prototyped in crypto.h.
-
-void _libssh2_dsa_free(libssh2_dsa_ctx *dsactx);
-Releases the DSA computation context at dsactx.
-
-
-7) Miscellaneous
-
-void libssh2_prepare_iovec(struct iovec *vector, unsigned int len);
-Prepare len consecutive iovec slots before using them.
-In example, this is needed to preset unused structure slacks on platforms
-requiring it.
-If this is not needed, it should be defined as an empty macro.
-
-void _libssh2_random(unsigned char *buf, int len);
-Store len random bytes at buf.
--- a/docs/INSTALL_AUTOTOOLS
+++ b/docs/INSTALL_AUTOTOOLS
@ -1,325 +0,0 @@
-Installation Instructions
-*************************
-
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
-Software Foundation, Inc.
-
-This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Basic Installation
-==================
-
-These are generic installation instructions.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  (Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.)
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
-
-     Running `configure' takes awhile.  While running, it prints some
-     messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.
-
-  5. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-Compilers and Options
-=====================
-
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about.  Run `./configure --help' for
-details on some of the pertinent environment variables.
-
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
-
-     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-
-   *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory.  After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
-
-Installation Names
-==================
-
-By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc.  You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
-     CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
-     OS KERNEL-OS
-
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
-   If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
-produce code for.
-
-   If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
-
-     ./configure CC=/usr/local2/bin/gcc
-
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).  Here is a another example:
-
-     /bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
-configuration-related scripts to be executed by `/bin/bash'.
-
-`configure' Invocation
-======================
-
-`configure' recognizes the following options to control how it operates.
-
-`--help'
-`-h'
-     Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`--cache-file=FILE'
-     Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
-     disable caching.
-
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
-     messages will still be shown).
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
-
-More configure options
-======================
-
-Some ./configure options deserve additional comments:
-
- * --enable-crypt-none
-
-	The SSH2 Transport allows for unencrypted data
-	transmission using the "none" cipher.  Because this is
-	such a huge security hole, it is typically disabled on
-	SSH2 implementations and is disabled in libssh2 by
-	default as well.
-
-	Enabling this option will allow for "none" as a
-	negotiable method, however it still requires that the
-	method be advertized by the remote end and that no
-	more-preferable methods are available.
-
- * --enable-mac-none
-
-	The SSH2 Transport also allows implementations to
-	forego a message authentication code.  While this is
-	less of a security risk than using a "none" cipher, it
-	is still not recommended as disabling MAC hashes
-	removes a layer of security.
-
-	Enabling this option will allow for "none" as a
-	negotiable method, however it still requires that the
-	method be advertized by the remote end and that no
-	more-preferable methods are available.
-
- * --disable-gex-new
-
-	The diffie-hellman-group-exchange-sha1 (dh-gex) key
-	exchange method originally defined an exchange
-	negotiation using packet type 30 to request a
-	generation pair based on a single target value.  Later
-	refinement of dh-gex provided for range and target
-	values.  By default libssh2 will use the newer range
-	method.
-
-	If you experience trouble connecting to an old SSH
-	server using dh-gex, try this option to fallback on
-	the older more reliable method.
-
- * --with-libgcrypt
- * --without-libgcrypt
- * --with-libgcrypt-prefix=DIR
-
-	libssh2 can use the Libgcrypt library
-	(http://www.gnupg.org/) for cryptographic operations.
-	Either Libgcrypt or OpenSSL is required.
-
-	Configure will attempt to locate Libgcrypt
-	automatically.
-
-	If your installation of Libgcrypt is in another
-	location, specify it using --with-libgcrypt-prefix.
-
- * --with-openssl
- * --without-openssl
- * --with-libssl-prefix=[DIR]
-
-	libssh2 can use the OpenSSL library
-	(http://www.openssl.org) for cryptographic operations.
-	Either Libgcrypt or OpenSSL is required.
-
-	Configure will attempt to locate OpenSSL in the
-	default location.
-
-	If your installation of OpenSSL is in another
-	location, specify it using --with-libssl-prefix.
-
- * --with-libz
- * --without-libz
- * --with-libz-prefix=[DIR]
-
-	If present, libssh2 will attempt to use the zlib
-	(http://www.zlib.org) for payload compression, however
-	zlib is not required.
-
-	If your installation of Libz is in another location,
-	specify it using --with-libz-prefix.
-
- * --enable-debug
-
-	Will make the build use more pedantic and strict compiler
-	options as well as enable the libssh2_trace() function (for
-	showing debug traces).
--- a/docs/INSTALL_CMAKE
+++ b/docs/INSTALL_CMAKE
@ -1,174 +0,0 @@
-License: see COPYING
-
-Source code: https://github.com/libssh2/libssh2
-
-Web site source code: https://github.com/libssh2/www
-
-Installation instructions are in docs/INSTALL
-=======
-To build libssh2 you will need CMake v2.8 or later [1] and one of the
-following cryptography libraries:
-
-* OpenSSL
-* Libgcrypt
-* WinCNG
-
-Getting started
---------------
-
-If you are happy with the default options, make a new build directory,
-change to it, configure the build environment and build the project:
-
-  mkdir bin
-  cd bin
-  cmake ..
-  cmake --build .
-
-libssh2 will be built as a static library and will use any
-cryptography library available.  The library binary will be put in
-`bin/src`, with the examples in `bin/example` and the tests in
-`bin/tests`.
-
-Customising the build
---------------------
-
-Of course, you might want to customise the build options.  You can
-pass the options to CMake on the command line:
-
-  cmake -D<option>=<value> ..
-
-The following options are available:
-
- * `BUILD_SHARED_LIBS=OFF`
-
-    Determines whether libssh2 is built as a static library or as a
-    shared library (.dll/.so).  Can be `ON` or `OFF`.
-
- * `CRYPTO_BACKEND=`
-
-    Chooses a specific cryptography library to use for cryptographic
-    operations.  Can be `OpenSSL` (http://www.openssl.org),
-    `Libgcrypt` (http://www.gnupg.org/), `WinCNG` (Windows Vista+) or
-    blank to use any library available.
-
-    CMake will attempt to locate the libraries automatically.  See [2]
-    for more information.
-
- * `ENABLE_ZLIB_COMPRESSION=OFF`
-
-    Will use zlib (http://www.zlib.org) for payload compression.  Can
-    be `ON` or `OFF`.
-
- * `ENABLE_CRYPT_NONE=OFF`
-
-    The SSH2 Transport allows for unencrypted data transmission using
-    the "none" cipher.  Because this is such a huge security hole, it
-    is typically disabled on SSH2 implementations and is disabled in
-    libssh2 by default as well.
-
-    Enabling this option will allow for "none" as a negotiable method,
-    however it still requires that the method be advertized by the
-    remote end and that no more-preferable methods are available.
-
- * `ENABLE_MAC_NONE=OFF`
-
-    The SSH2 Transport also allows implementations to forego a message
-    authentication code.  While this is less of a security risk than
-    using a "none" cipher, it is still not recommended as disabling
-    MAC hashes removes a layer of security.
-
-    Enabling this option will allow for "none" as a negotiable method,
-    however it still requires that the method be advertized by the
-    remote end and that no more-preferable methods are available.
-
- * `ENABLE_GEX_NEW=ON`
-
-    The diffie-hellman-group-exchange-sha1 (dh-gex) key exchange
-    method originally defined an exchange negotiation using packet
-    type 30 to request a generation pair based on a single target
-    value.  Later refinement of dh-gex provided for range and target
-    values.  By default libssh2 will use the newer range method.
-
-    If you experience trouble connecting to an old SSH server using
-    dh-gex, try this option to fallback on the older more reliable
-    method.
-
- * `ENABLE_DEBUG_LOGGING=ON` in Debug, `=OFF` in Release
-
-    Will enable the libssh2_trace() function for showing debug traces.
-
-Build tools
-----------
-
-The previous examples used CMake to start the build using:
-
-  cmake --build .
-
-Alternatively, once CMake has configured your project, you can just
-use your own build tool, e.g GNU make, Visual Studio, etc., from that
-point onwards.
-
-Tests
-----
-
-To test the build, run the appropriate test target for your build
-system.  For example:
-
-  cmake --build . --target test
-or
-  cmake --build . --target RUN_TESTS
-
-How do I use libssh2 in my project if my project doesn't use CMake?
-------------------------------------------------------------------
-
-If you are not using CMake for your own project, install libssh2
-
-  cmake <libssh2 source location>
-  cmake --build .
-  cmake --build . --target install
-or
-  cmake --build . --target INSTALL
-
-and then specify the install location to your project in the normal
-way for your build environment.  If you don't like the default install
-location, add `-DCMAKE_INSTALL_PREFIX=<chosen prefix>` when initially
-configuring the project.
-
-How can I use libssh2 in my project if it also uses CMake?
----------------------------------------------------------
-
-If your own project also uses CMake, you don't need to worry about
-setting it up with libssh2's location.  Just add just the following
-lines and CMake will find libssh2 on your system, set up the necessary
-paths and link the library with your binary.
-
-    find_package(Libssh2 REQUIRED CONFIG)
-    target_link_libraries(my_project_target Libssh2::libssh2)
-
-Of course, you still have to make libssh2 available on your system
-first.  You can install it in the traditional way shown above, but you
-don't have to.  Instead you can just build it, which will export its
-location to the user package registry [3] where `find_package` will
-find it.
-
-You can even combine the two steps using a so-called 'superbuild'
-project [4] that downloads, builds and exports libssh2, and then
-builds your project:
-
-    include(ExternalProject)
-
-    ExternalProject_Add(
-        Libssh2
-        URL <libssh2 download location>
-        URL_HASH SHA1=<libssh2 archive SHA1>
-	INSTALL_COMMAND "")
-
-    ExternalProject_Add(
-        MyProject DEPENDS Libssh2
-        SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/src
-        INSTALL_COMMAND "")
-
-[1] http://www.cmake.org/cmake/resources/software.html
-[2] http://www.cmake.org/cmake/help/v3.0/manual/cmake-packages.7.html
-[3] http://www.cmake.org/cmake/help/v3.0/manual/cmake-packages.7.html#package-registry
-[4] http://www.kitware.com/media/html/BuildingExternalProjectsWithCMake2.8.html
--- a/docs/Makefile.am
+++ b/docs/Makefile.am
@ -1,175 +0,0 @@
-# $Id: Makefile.am,v 1.37 2009/03/26 15:41:15 bagder Exp $
-
-EXTRA_DIST = template.3 BINDINGS INSTALL_AUTOTOOLS INSTALL_CMAKE HACKING TODO	\
- AUTHORS CMakeLists.txt HACKING.CRYPTO
-
-dist_man_MANS = \
-	libssh2_agent_connect.3 \
-	libssh2_agent_disconnect.3 \
-	libssh2_agent_free.3 \
-	libssh2_agent_get_identity.3 \
-	libssh2_agent_init.3 \
-	libssh2_agent_list_identities.3 \
-	libssh2_agent_userauth.3 \
-	libssh2_banner_set.3 \
-	libssh2_base64_decode.3 \
-	libssh2_channel_close.3 \
-	libssh2_channel_direct_tcpip.3 \
-	libssh2_channel_direct_tcpip_ex.3 \
-	libssh2_channel_eof.3 \
-	libssh2_channel_exec.3 \
-	libssh2_channel_flush.3 \
-	libssh2_channel_flush_ex.3 \
-	libssh2_channel_flush_stderr.3 \
-	libssh2_channel_forward_accept.3 \
-	libssh2_channel_forward_cancel.3 \
-	libssh2_channel_forward_listen.3 \
-	libssh2_channel_forward_listen_ex.3 \
-	libssh2_channel_free.3 \
-	libssh2_channel_get_exit_signal.3 \
-	libssh2_channel_get_exit_status.3 \
-	libssh2_channel_handle_extended_data.3 \
-	libssh2_channel_handle_extended_data2.3 \
-	libssh2_channel_ignore_extended_data.3 \
-	libssh2_channel_open_ex.3 \
-	libssh2_channel_open_session.3 \
-	libssh2_channel_process_startup.3 \
-	libssh2_channel_read.3 \
-	libssh2_channel_read_ex.3 \
-	libssh2_channel_read_stderr.3 \
-	libssh2_channel_receive_window_adjust.3 \
-	libssh2_channel_receive_window_adjust2.3 \
-	libssh2_channel_request_pty.3 \
-	libssh2_channel_request_pty_ex.3 \
-	libssh2_channel_request_pty_size.3 \
-	libssh2_channel_request_pty_size_ex.3 \
-	libssh2_channel_send_eof.3 \
-	libssh2_channel_set_blocking.3 \
-	libssh2_channel_setenv.3 \
-	libssh2_channel_setenv_ex.3 \
-	libssh2_channel_shell.3 \
-	libssh2_channel_subsystem.3 \
-	libssh2_channel_wait_closed.3 \
-	libssh2_channel_wait_eof.3 \
-	libssh2_channel_window_read.3 \
-	libssh2_channel_window_read_ex.3 \
-	libssh2_channel_window_write.3 \
-	libssh2_channel_window_write_ex.3 \
-	libssh2_channel_write.3 \
-	libssh2_channel_write_ex.3 \
-	libssh2_channel_write_stderr.3 \
-	libssh2_channel_x11_req.3 \
-	libssh2_channel_x11_req_ex.3 \
-	libssh2_exit.3 \
-	libssh2_free.3 \
-	libssh2_hostkey_hash.3 \
-	libssh2_init.3 \
-	libssh2_keepalive_config.3 \
-	libssh2_keepalive_send.3 \
-	libssh2_knownhost_add.3 \
-	libssh2_knownhost_addc.3 \
-	libssh2_knownhost_check.3 \
-	libssh2_knownhost_checkp.3 \
-	libssh2_knownhost_del.3 \
-	libssh2_knownhost_free.3 \
-	libssh2_knownhost_get.3 \
-	libssh2_knownhost_init.3 \
-	libssh2_knownhost_readfile.3 \
-	libssh2_knownhost_readline.3 \
-	libssh2_knownhost_writefile.3 \
-	libssh2_knownhost_writeline.3 \
-	libssh2_poll.3 \
-	libssh2_poll_channel_read.3 \
-	libssh2_publickey_add.3 \
-	libssh2_publickey_add_ex.3 \
-	libssh2_publickey_init.3 \
-	libssh2_publickey_list_fetch.3 \
-	libssh2_publickey_list_free.3 \
-	libssh2_publickey_remove.3 \
-	libssh2_publickey_remove_ex.3 \
-	libssh2_publickey_shutdown.3 \
-	libssh2_scp_recv.3 \
-	libssh2_scp_recv2.3 \
-	libssh2_scp_send.3 \
-	libssh2_scp_send64.3 \
-	libssh2_scp_send_ex.3 \
-	libssh2_session_abstract.3 \
-	libssh2_session_banner_get.3 \
-	libssh2_session_banner_set.3 \
-	libssh2_session_block_directions.3 \
-	libssh2_session_callback_set.3 \
-	libssh2_session_disconnect.3 \
-	libssh2_session_disconnect_ex.3 \
-	libssh2_session_flag.3 \
-	libssh2_session_free.3 \
-	libssh2_session_get_blocking.3 \
-	libssh2_session_get_timeout.3 \
-	libssh2_session_handshake.3 \
-	libssh2_session_hostkey.3 \
-	libssh2_session_init.3 \
-	libssh2_session_init_ex.3 \
-	libssh2_session_last_errno.3 \
-	libssh2_session_last_error.3 \
-	libssh2_session_set_last_error.3 \
-	libssh2_session_method_pref.3 \
-	libssh2_session_methods.3 \
-	libssh2_session_set_blocking.3 \
-	libssh2_session_set_timeout.3 \
-	libssh2_session_startup.3 \
-	libssh2_session_supported_algs.3 \
-	libssh2_sftp_close.3 \
-	libssh2_sftp_close_handle.3 \
-	libssh2_sftp_closedir.3 \
-	libssh2_sftp_fsetstat.3 \
-	libssh2_sftp_fstat.3 \
-	libssh2_sftp_fstat_ex.3 \
-	libssh2_sftp_fstatvfs.3 \
-	libssh2_sftp_fsync.3 \
-	libssh2_sftp_get_channel.3 \
-	libssh2_sftp_init.3 \
-	libssh2_sftp_last_error.3 \
-	libssh2_sftp_lstat.3 \
-	libssh2_sftp_mkdir.3 \
-	libssh2_sftp_mkdir_ex.3 \
-	libssh2_sftp_open.3 \
-	libssh2_sftp_open_ex.3 \
-	libssh2_sftp_opendir.3 \
-	libssh2_sftp_read.3 \
-	libssh2_sftp_readdir.3 \
-	libssh2_sftp_readdir_ex.3 \
-	libssh2_sftp_readlink.3 \
-	libssh2_sftp_realpath.3 \
-	libssh2_sftp_rename.3 \
-	libssh2_sftp_rename_ex.3 \
-	libssh2_sftp_rewind.3 \
-	libssh2_sftp_rmdir.3 \
-	libssh2_sftp_rmdir_ex.3 \
-	libssh2_sftp_seek.3 \
-	libssh2_sftp_seek64.3 \
-	libssh2_sftp_setstat.3 \
-	libssh2_sftp_shutdown.3 \
-	libssh2_sftp_stat.3 \
-	libssh2_sftp_stat_ex.3 \
-	libssh2_sftp_statvfs.3 \
-	libssh2_sftp_symlink.3 \
-	libssh2_sftp_symlink_ex.3 \
-	libssh2_sftp_tell.3 \
-	libssh2_sftp_tell64.3 \
-	libssh2_sftp_unlink.3 \
-	libssh2_sftp_unlink_ex.3 \
-	libssh2_sftp_write.3 \
-	libssh2_trace.3 \
-	libssh2_trace_sethandler.3 \
-	libssh2_userauth_authenticated.3 \
-	libssh2_userauth_hostbased_fromfile.3 \
-	libssh2_userauth_hostbased_fromfile_ex.3 \
-	libssh2_userauth_keyboard_interactive.3 \
-	libssh2_userauth_keyboard_interactive_ex.3 \
-	libssh2_userauth_list.3 \
-	libssh2_userauth_password.3 \
-	libssh2_userauth_password_ex.3 \
-	libssh2_userauth_publickey.3 \
-	libssh2_userauth_publickey_fromfile.3 \
-	libssh2_userauth_publickey_fromfile_ex.3 \
-	libssh2_userauth_publickey_frommemory.3 \
-	libssh2_version.3
--- a/docs/TODO
+++ b/docs/TODO
@ -1,174 +0,0 @@
-Things TODO
-===========
-
-* Fix the numerous malloc+copy operations for sending data, see "Buffering
-  Improvements" below for details
-
-* make sure the windowing code adapts better to slow situations so that it
-  doesn't then use as much memory as today. Possibly by an app-controllable
-  "Window mode"?
-
-* Decrease the number of mallocs. Everywhere. Will get easier once the
-  buffering improvements have been done.
-
-* Use SO_NOSIGPIPE for Mac OS/BSD systems where MSG_NOSIGNAL doesn't
-  exist/work
-
-* Extend the test suite to actually test lots of aspects of libssh2
-
-* Fix all compiler warnings (some can't be done without API changes)
-
-* Expose error messages sent by the server
-
-* select() is troublesome with libssh2 when using multiple channels over
-  the same session. See "New Transport API" below for more details.
-
-At next SONAME bump
-===================
-
-* stop using #defined macros as part of the official API. The macros should
-  either be turned into real functions or discarded from the API.
-
-* fix the parts of the API where object pointers and function pointers are
-  mixed like libssh2_session_callback_set()
-
-* remove the following functions from the API/ABI
-
-  libssh2_base64_decode()
-  libssh2_session_flag()
-  libssh2_channel_handle_extended_data()
-  libssh2_channel_receive_window_adjust()
-  libssh2_poll()
-  libssh2_poll_channel_read()
-  libssh2_session_startup() (libssh2_session_handshake() is the replacement)
-  libssh2_banner_set() (libssh2_session_banner_set() is the repacement)
-
-* Rename a few function:
-
-  libssh2_hostkey_hash => libssh2_session_hostkey_hash
-  libssh2_banner_set => libssh2_session_banner_set
-
-* change 'int' to 'libssh2_socket_t' in the public API for sockets.
-
-* Use 'size_t' for string lengths in all functions.
-
-* Add a comment field to struct libssh2_knownhost.
-
-* remove the existing libssh2_knownhost_add() function and rename
-  libssh2_knownhost_addc to become the new libssh2_knownhost_add instead
-
-* remove the existing libssh2_scp_send_ex() function and rename
-  libssh2_scp_send64 to become the new libssh2_scp_send instead.
-
-* remove the existing libssh2_knownhost_check() functin and rename
-  libssh2_knownhost_checkp() to become the new libssh2_knownhost_check instead
-
-Buffering Improvements
-======================
-
-transport_write
-
-  - If this function gets called with a total packet size that is larger than
-  32K, it should create more than one SSH packet so that it keeps the largest
-  one below 32K
-
-sftp_write
-
-  - should not copy/allocate anything for the data, only create a header chunk
-  and pass on the payload data to channel_write "pointed to"
-
-New Transport API
-=================
-
-THE PROBLEM
-
-The problem in a nutshell is that when an application opens up multiple
-channels over a single session, those are all using the same socket. If the
-application is then using select() to wait for traffic (like any sensible app
-does) and wants to act on the data when select() tells there is something to
-for example read, what does an application do?
-
-With our current API, you have to loop over all the channels and read from
-them to see if they have data. This effectively makes blocking reads
-impossible. If the app has many channels in a setup like this, it even becomes
-slow. (The original API had the libssh2_poll_channel_read() and libssh2_poll()
-to somewhat overcome this hurdle, but they too have pretty much the same
-problems plus a few others.)
-
-Traffic in the other direction is similarly limited: the app has to try
-sending to all channels, even though some of them may very well not accept any
-data at that point.
-
-A SOLUTION
-
-I suggest we introduce two new helper functions:
-
- libssh2_transport_read()
-
- - Read "a bunch" of data from the given socket and returns information to the
-   app about what channels that are now readable (ie they will not block when
-   read from). The function can be called over and over and it will repeatedly
-   return info about what channels that are readable at that moment.
-
- libssh2_transport_write()
-
- - Returns information about what channels that are writable, in the sense
-   that they have windows set from the remote side that allows data to get
-   sent. Writing to one of those channels will not block. Of course, the
-   underlying socket may only accept a certain amount of data, so at the first
-   short return, nothing more should be attempted to get sent until select()
-   (or equivalent) has been used on the master socket again.
-
-I haven't yet figured out a sensible API for how these functions should return
-that info, but if we agree on the general principles I guess we can work that
-out.
-
-VOLUNTARY
-
-  I wanted to mention that these two helper functions would not be mandatory
-  in any way. They would just be there for those who want them, and existing
-  programs can remain using the old functions only if they prefer to.
-
-New SFTP API
-============
-
-PURPOSE
-
- Provide API functions that explicitly tells at once that a (full) SFTP file
- transfer is wanted, to allow libssh2 to leverage on that knowledge to speed
- up things internally. It can for example do read ahead, buffer writes (merge
- small writes into larger chunks), better tune the SSH window and more. This
- sort of API is already provided for SCP transfers.
-
-API
-
- New functions:
-
-    LIBSSH2_SFTP_HANDLE *libssh2_sftp_send(SFTP_SESSION *sftp,
-                                           uint64_t filesize,
-                                           char *remote_path,
-                                           size_t remote_path_len,
-                                           long mode);
-
- Tell libssh2 that a local file with a given size is about to get sent to
- the SFTP server.
-
-    LIBSSH2_SFTP_HANDLE *libssh2_sftp_recv();
-
- Tell libssh2 that a remote file is requested to get downloaded from the SFTP
- server.
-
- Only the setup of the file transfer is different from an application's point
- of view. Depending on direction of the transfer(s), the following already
- existing functions should then be used until the transfer is complete:
-
- libssh2_sftp_read()
- libssh2_sftp_write()
-
-HOW TO USE
-
- 1. Setup the transfer using one of the two new functions.
-
- 2. Loop through the reading or writing of data.
-
- 3. Cleanup the transfer
--- a/docs/libssh2_agent_connect.3
+++ b/docs/libssh2_agent_connect.3
@ -1,23 +0,0 @@
-.\"
-.\" Copyright (c) 2009 by Daiki Ueno
-.\"
-.TH libssh2_agent_connect 3 "23 Dec 2009" "libssh2 1.2" "libssh2 manual"
-.SH NAME
-libssh2_agent_connect - connect to an ssh-agent
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int libssh2_agent_connect(LIBSSH2_AGENT *agent);
-.SH DESCRIPTION
-Connect to an ssh-agent running on the system.
-
-Call \fBlibssh2_agent_disconnect(3)\fP to close the connection after
-you're doing using it.
-.SH RETURN VALUE
-Returns 0 if succeeded, or a negative value for error.
-.SH AVAILABILITY
-Added in libssh2 1.2
-.SH SEE ALSO
-.BR libssh2_agent_init(3)
-.BR libssh2_agent_disconnect(3)
-
--- a/docs/libssh2_agent_disconnect.3
+++ b/docs/libssh2_agent_disconnect.3
@ -1,20 +0,0 @@
-.\"
-.\" Copyright (c) 2009 by Daiki Ueno
-.\"
-.TH libssh2_agent_disconnect 3 "23 Dec 2009" "libssh2 1.2" "libssh2 manual"
-.SH NAME
-libssh2_agent_disconnect - close a connection to an ssh-agent
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int libssh2_agent_disconnect(LIBSSH2_AGENT *agent);
-.SH DESCRIPTION
-Close a connection to an ssh-agent.
-
-.SH RETURN VALUE
-Returns 0 if succeeded, or a negative value for error.
-.SH AVAILABILITY
-Added in libssh2 1.2
-.SH SEE ALSO
-.BR libssh2_agent_connect(3)
-.BR libssh2_agent_free(3)
--- a/docs/libssh2_agent_free.3
+++ b/docs/libssh2_agent_free.3
@ -1,20 +0,0 @@
-.\"
-.\" Copyright (c) 2009 by Daiki Ueno
-.\"
-.TH libssh2_agent_free 3 "28 May 2009" "libssh2 1.2" "libssh2 manual"
-.SH NAME
-libssh2_agent_free - free an ssh-agent handle
-.SH SYNOPSIS
-#include <libssh2.h>
-
-void libssh2_agent_free(LIBSSH2_AGENT *agent);
-.SH DESCRIPTION
-Free an ssh-agent handle.  This function also frees the internal
-collection of public keys.
-.SH RETURN VALUE
-None.
-.SH AVAILABILITY
-Added in libssh2 1.2
-.SH SEE ALSO
-.BR libssh2_agent_init(3)
-.BR libssh2_agent_disconnect(3)
--- a/docs/libssh2_agent_get_identity.3
+++ b/docs/libssh2_agent_get_identity.3
@ -1,34 +0,0 @@
-.\"
-.\" Copyright (c) 2009 by Daiki Ueno
-.\"
-.TH libssh2_agent_get_identity 3 "23 Dec 2009" "libssh2 1.2" "libssh2 manual"
-.SH NAME
-libssh2_agent_get_identity - get a public key off the collection of public keys managed by ssh-agent
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int libssh2_agent_get_identity(LIBSSH2_AGENT *agent,
-                               struct libssh2_agent_publickey **store,
-                               struct libssh2_agent_publickey *prev);
-.SH DESCRIPTION
-\fIlibssh2_agent_get_identity(3)\fP allows an application to iterate
-over all public keys in the collection managed by ssh-agent.
-
-\fIstore\fP should point to a pointer that gets filled in to point to the
-public key data.
-
-\fIprev\fP is a pointer to a previous 'struct libssh2_agent_publickey'
-as returned by a previous invoke of this function, or NULL to get the
-first entry in the internal collection.
-.SH RETURN VALUE
-Returns 0 if everything is fine and information about a host was stored in
-the \fIstore\fP struct.
-
-Returns 1 if it reached the end of public keys.
-
-Returns negative values for error
-.SH AVAILABILITY
-Added in libssh2 1.2
-.SH SEE ALSO
-.BR libssh2_agent_list_identities(3)
-.BR libssh2_agent_userauth(3)
--- a/docs/libssh2_agent_init.3
+++ b/docs/libssh2_agent_init.3
@ -1,26 +0,0 @@
-.\"
-.\" Copyright (c) 2009 by Daiki Ueno
-.\"
-.TH libssh2_agent_init 3 "23 Dec 2009" "libssh2 1.2" "libssh2 manual"
-.SH NAME
-libssh2_agent_init - init an ssh-agent handle
-.SH SYNOPSIS
-#include <libssh2.h>
-
-LIBSSH2_AGENT *libssh2_agent_init(LIBSSH2_SESSION *session);
-.SH DESCRIPTION
-Init an ssh-agent handle. Returns the handle to an internal
-representation of an ssh-agent connection.  After the successful
-initialization, an application can call \fBlibssh2_agent_connect(3)\fP
-to connect to a running ssh-agent.
-
-Call \fBlibssh2_agent_free(3)\fP to free the handle again after you're
-doing using it.
-.SH RETURN VALUE
-Returns a handle pointer or NULL if something went wrong. The returned handle
-is used as input to all other ssh-agent related functions libssh2 provides.
-.SH AVAILABILITY
-Added in libssh2 1.2
-.SH SEE ALSO
-.BR libssh2_agent_connect(3)
-.BR libssh2_agent_free(3)
--- a/docs/libssh2_agent_list_identities.3
+++ b/docs/libssh2_agent_list_identities.3
@ -1,24 +0,0 @@
-.\"
-.\" Copyright (c) 2009 by Daiki Ueno
-.\"
-.TH libssh2_agent_list_identities 3 "23 Dec 2009" "libssh2 1.2" "libssh2 manual"
-.SH NAME
-libssh2_agent_list_identities - request an ssh-agent to list of public keys.
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int libssh2_agent_list_identities(LIBSSH2_AGENT *agent);
-.SH DESCRIPTION
-Request an ssh-agent to list of public keys, and stores them in the
-internal collection of the handle.  Call
-\fIlibssh2_agent_get_identity(3)\fP to get a public key off the
-collection.
-
-.SH RETURN VALUE
-Returns 0 if succeeded, or a negative value for error.
-.SH AVAILABILITY
-Added in libssh2 1.2
-.SH SEE ALSO
-.BR libssh2_agent_connect(3)
-.BR libssh2_agent_get_identity(3)
-
--- a/docs/libssh2_agent_userauth.3
+++ b/docs/libssh2_agent_userauth.3
@ -1,29 +0,0 @@
-.\"
-.\" Copyright (c) 2009 by Daiki Ueno
-.\"
-.TH libssh2_agent_userauth 3 "23 Dec 2009" "libssh2 1.2" "libssh2 manual"
-.SH NAME
-libssh2_agent_userauth - authenticate a session with a public key, with the help of ssh-agent
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int libssh2_agent_userauth(LIBSSH2_AGENT *agent,
-                           const char *username,
-                           struct libssh2_agent_publickey *identity);
-.SH DESCRIPTION
-\fIagent\fP - ssh-agent handle as returned by 
-.BR libssh2_agent_init(3)
-
-\fIusername\fP - Remote user name to authenticate as.
-
-\fIidentity\fP - Public key to authenticate with, as returned by 
-.BR libssh2_agent_get_identity(3)
-
-Attempt public key authentication with the help of ssh-agent.
-.SH RETURN VALUE
-Returns 0 if succeeded, or a negative value for error.
-.SH AVAILABILITY
-Added in libssh2 1.2
-.SH SEE ALSO
-.BR libssh2_agent_init(3)
-.BR libssh2_agent_get_identity(3)
--- a/docs/libssh2_banner_set.3
+++ b/docs/libssh2_banner_set.3
@ -1,32 +0,0 @@
-.TH libssh2_banner_set 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_banner_set - set the SSH protocol banner for the local client
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int 
-libssh2_banner_set(LIBSSH2_SESSION *session, const char *banner);
-
-.SH DESCRIPTION
-This function is \fBDEPRECATED\fP. Use \fIlibssh2_session_banner_set(3)\fP
-instead!
-
-\fIsession\fP - Session instance as returned by 
-.BR libssh2_session_init_ex(3)
-
-\fIbanner\fP - A pointer to a user defined banner
-
-Set the banner that will be sent to the remote host when the SSH session is 
-started with 
-.BR libssh2_session_handshake(3)
-  This is optional; a banner corresponding to the protocol and libssh2 version will be sent by default.
-.SH RETURN VALUE
-Return 0 on success or negative on failure.  It returns
-LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
-LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
-.SH AVAILABILITY
-Marked as deprecated since 1.4.0
-.SH ERRORS
-\fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
-.SH SEE ALSO
-.BR libssh2_session_handshake(3)
--- a/docs/libssh2_base64_decode.3
+++ b/docs/libssh2_base64_decode.3
@ -1,25 +0,0 @@
-.TH libssh2_base64_decode 3 "23 Dec 2008" "libssh2 1.0" "libssh2 manual"
-.SH NAME
-libssh2_base64_decode - decode a base64 encoded string
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int libssh2_base64_decode(LIBSSH2_SESSION *session, char **dest,
-                          unsigned int *dest_len, const char *src,
-                          unsigned int src_len);
-.SH DESCRIPTION
-This function is deemed DEPRECATED and will be removed from libssh2 in a
-future version. Don't use it!
-
-Decode a base64 chunk and store it into a newly allocated buffer. 'dest_len'
-will be set to hold the length of the returned buffer that '*dest' will point
-to.
-
-The returned buffer is allocated by this function, but it is not clear how to
-free that memory!
-.SH BUGS
-The memory that *dest points to is allocated by the malloc function libssh2
-uses, but there's no way for an application to free this data in a safe and
-reliable way!
-.SH RETURN VALUE
-0 if successful, \-1 if any error occurred.
--- a/docs/libssh2_channel_close.3
+++ b/docs/libssh2_channel_close.3
@ -1,29 +0,0 @@
-.TH libssh2_channel_close 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_close - close a channel
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int 
-libssh2_channel_close(LIBSSH2_CHANNEL *channel);
-
-.SH DESCRIPTION
-\fIchannel\fP - active channel stream to set closed status on.
-
-Close an active data channel. In practice this means sending an SSH_MSG_CLOSE 
-packet to the remote host which serves as instruction that no further data 
-will be sent to it. The remote host may still send data back until it sends 
-its own close message in response. To wait for the remote end to close its 
-connection as well, follow this command with 
-.BR libssh2_channel_wait_closed(3)
-
-.SH RETURN VALUE
-Return 0 on success or negative on failure.  It returns
-LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
-LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
-
-.SH ERRORS
-\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
-
-.SH SEE ALSO
-.BR libssh2_channel_open_ex(3)
--- a/docs/libssh2_channel_direct_tcpip.3
+++ b/docs/libssh2_channel_direct_tcpip.3
@ -1,18 +0,0 @@
-.TH libssh2_channel_direct_tcpip 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
-.SH NAME
-libssh2_channel_direct_tcpip - convenience macro for \fIlibssh2_channel_direct_tcpip_ex(3)\fP calls
-.SH SYNOPSIS
-#include <libssh2.h>
-
-LIBSSH2_CHANNEL *
-libssh2_channel_direct_tcpip(LIBSSH2_SESSION *session, const char *host, int port);
-
-.SH DESCRIPTION
-This is a macro defined in a public libssh2 header file that is using the
-underlying function \fIlibssh2_channel_direct_tcpip_ex(3)\fP.
-.SH RETURN VALUE
-See \fIlibssh2_channel_direct_tcpip_ex(3)\fP
-.SH ERRORS
-See \fIlibssh2_channel_direct_tcpip_ex(3)\fP
-.SH SEE ALSO
-.BR libssh2_channel_direct_tcpip_ex(3)
--- a/docs/libssh2_channel_direct_tcpip_ex.3
+++ b/docs/libssh2_channel_direct_tcpip_ex.3
@ -1,35 +0,0 @@
-.TH libssh2_channel_direct_tcpip_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_direct_tcpip_ex - Tunnel a TCP connection through an SSH session
-.SH SYNOPSIS
-#include <libssh2.h>
-
-LIBSSH2_CHANNEL * 
-libssh2_channel_direct_tcpip_ex(LIBSSH2_SESSION *session, const char *host, int port, const char *shost, int sport);
-
-LIBSSH2_CHANNEL * 
-libssh2_channel_direct_tcpip(LIBSSH2_SESSION *session, const char *host, int port);
-
-.SH DESCRIPTION
-\fIsession\fP - Session instance as returned by 
-.BR libssh2_session_init_ex(3)
-
-\fIhost\fP - Third party host to connect to using the SSH host as a proxy.
-
-\fIport\fP - Port on third party host to connect to.
-
-\fIshost\fP - Host to tell the SSH server the connection originated on.
-
-\fIsport\fP - Port to tell the SSH server the connection originated from.
-
-Tunnel a TCP/IP connection through the SSH transport via the remote host to 
-a third party. Communication from the client to the SSH server remains 
-encrypted, communication from the server to the 3rd party host travels 
-in cleartext.
-
-.SH RETURN VALUE
-Pointer to a newly allocated LIBSSH2_CHANNEL instance, or NULL on errors.
-.SH ERRORS
-\fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
-.SH SEE ALSO
-.BR libssh2_session_init_ex(3)
--- a/docs/libssh2_channel_eof.3
+++ b/docs/libssh2_channel_eof.3
@ -1,17 +0,0 @@
-.TH libssh2_channel_eof 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_eof - check a channel's EOF status
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int 
-libssh2_channel_eof(LIBSSH2_CHANNEL *channel);
-.SH DESCRIPTION
-\fIchannel\fP - active channel stream to set closed status on.
-
-Check if the remote host has sent an EOF status for the selected stream.
-.SH RETURN VALUE
-Returns 1 if the remote host has sent EOF, otherwise 0. Negative on
-failure.
-.SH SEE ALSO
-.BR libssh2_channel_close(3)
--- a/docs/libssh2_channel_exec.3
+++ b/docs/libssh2_channel_exec.3
@ -1,17 +0,0 @@
-.TH libssh2_channel_exec 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
-.SH NAME
-libssh2_channel_exec - convenience macro for \fIlibssh2_channel_process_startup(3)\fP calls
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int libssh2_channel_exec(LIBSSH2_CHANNEL *channel, const char *command);
-
-.SH DESCRIPTION
-This is a macro defined in a public libssh2 header file that is using the
-underlying function \fIlibssh2_channel_process_startup(3)\fP.
-.SH RETURN VALUE
-See \fIlibssh2_channel_process_startup(3)\fP
-.SH ERRORS
-See \fIlibssh2_channel_process_startup(3)\fP
-.SH SEE ALSO
-.BR libssh2_channel_process_startup(3)
--- a/docs/libssh2_channel_flush.3
+++ b/docs/libssh2_channel_flush.3
@ -1,17 +0,0 @@
-.TH libssh2_channel_flush 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
-.SH NAME
-libssh2_channel_flush - convenience macro for \fIlibssh2_channel_flush_ex(3)\fP calls
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int libssh2_channel_flush(LIBSSH2_CHANNEL *channel);
-
-.SH DESCRIPTION
-This is a macro defined in a public libssh2 header file that is using the
-underlying function \fIlibssh2_channel_flush_ex(3)\fP.
-.SH RETURN VALUE
-See \fIlibssh2_channel_flush_ex(3)\fP
-.SH ERRORS
-See \fIlibssh2_channel_flush_ex(3)\fP
-.SH SEE ALSO
-.BR libssh2_channel_flush_ex(3)
--- a/docs/libssh2_channel_flush_ex.3
+++ b/docs/libssh2_channel_flush_ex.3
@ -1,32 +0,0 @@
-.TH libssh2_channel_flush_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_flush_ex - flush a channel
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int 
-libssh2_channel_flush_ex(LIBSSH2_CHANNEL *channel, int streamid);
-
-int 
-libssh2_channel_flush(LIBSSH2_CHANNEL *channel);
-
-int 
-libssh2_channel_flush_stderr(LIBSSH2_CHANNEL *channel);
-
-.SH DESCRIPTION
-\fIchannel\fP - Active channel stream to flush.
-
-\fIstreamid\fP - Specific substream number to flush. Groups of substreams may 
-be flushed by passing on of the following Constants.
-.br
-\fBLIBSSH2_CHANNEL_FLUSH_EXTENDED_DATA\fP: Flush all extended data substreams
-.br
-\fBLIBSSH2_CHANNEL_FLUSH_ALL\fP: Flush all substreams
-
-Flush the read buffer for a given channel instance. Individual substreams may 
-be flushed by number or using one of the provided macros.
-
-.SH RETURN VALUE
-Return 0 on success or negative on failure.  It returns
-LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
-LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
--- a/docs/libssh2_channel_flush_stderr.3
+++ b/docs/libssh2_channel_flush_stderr.3
@ -1,17 +0,0 @@
-.TH libssh2_channel_flush_stderr 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
-.SH NAME
-libssh2_channel_flush_stderr - convenience macro for \fIlibssh2_channel_flush_ex(3)\fP calls
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int libssh2_channel_flush_stderr(LIBSSH2_CHANNEL *channel);
-
-.SH DESCRIPTION
-This is a macro defined in a public libssh2 header file that is using the
-underlying function \fIlibssh2_channel_flush_ex(3)\fP.
-.SH RETURN VALUE
-See \fIlibssh2_channel_flush_ex(3)\fP
-.SH ERRORS
-See \fIlibssh2_channel_flush_ex(3)\fP
-.SH SEE ALSO
-.BR libssh2_channel_flush_ex(3)
--- a/docs/libssh2_channel_forward_accept.3
+++ b/docs/libssh2_channel_forward_accept.3
@ -1,20 +0,0 @@
-.TH libssh2_channel_forward_accept 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_forward_accept - accept a queued connection
-.SH SYNOPSIS
-#include <libssh2.h>
-
-LIBSSH2_CHANNEL *
-libssh2_channel_forward_accept(LIBSSH2_LISTENER *listener);
-
-.SH DESCRIPTION
-\fIlistener\fP is a forwarding listener instance as returned by
-\fBlibssh2_channel_forward_listen_ex(3)\fP.
-.SH RETURN VALUE
-A newly allocated channel instance or NULL on failure.
-.SH ERRORS
-When this function returns NULL use \fIlibssh2_session_last_errno(3)\fP to
-extract the error code. If that code is \fILIBSSH2_ERROR_EAGAIN\fP, the
-session is set to do non-blocking I/O but the call would block.
-.SH SEE ALSO
-.BR libssh2_channel_forward_listen_ex(3)
--- a/docs/libssh2_channel_forward_cancel.3
+++ b/docs/libssh2_channel_forward_cancel.3
@ -1,27 +0,0 @@
-.TH libssh2_channel_forward_cancel 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_forward_cancel - cancel a forwarded TCP port
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int 
-libssh2_channel_forward_cancel(LIBSSH2_LISTENER *listener);
-
-.SH DESCRIPTION
-\fIlistener\fP - Forwarding listener instance as returned by 
-.BR libssh2_channel_forward_listen_ex(3)
-
-Instruct the remote host to stop listening for new connections on a previously requested host/port.
-
-.SH RETURN VALUE
-Return 0 on success or negative on failure.  It returns
-LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
-LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
-
-.SH ERRORS
-\fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
-
-\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
-
-.SH SEE ALSO
-.BR libssh2_channel_forward_listen_ex(3)
--- a/docs/libssh2_channel_forward_listen.3
+++ b/docs/libssh2_channel_forward_listen.3
@ -1,17 +0,0 @@
-.TH libssh2_channel_forward_listen 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
-.SH NAME
-libssh2_channel_forward_listen - convenience macro for \fIlibssh2_channel_forward_listen_ex(3)\fP calls
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int libssh2_channel_forward_listen(LIBSSH2_SESSION *session, int port);
-
-.SH DESCRIPTION
-This is a macro defined in a public libssh2 header file that is using the
-underlying function \fIlibssh2_channel_forward_listen_ex(3)\fP.
-.SH RETURN VALUE
-See \fIlibssh2_channel_forward_listen_ex(3)\fP
-.SH ERRORS
-See \fIlibssh2_channel_forward_listen_ex(3)\fP
-.SH SEE ALSO
-.BR libssh2_channel_forward_listen_ex(3)
--- a/docs/libssh2_channel_forward_listen_ex.3
+++ b/docs/libssh2_channel_forward_listen_ex.3
@ -1,46 +0,0 @@
-.TH libssh2_channel_forward_listen_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_forward_listen_ex - listen to inbound connections
-.SH SYNOPSIS
-#include <libssh2.h>
-
-LIBSSH2_LISTENER * 
-libssh2_channel_forward_listen_ex(LIBSSH2_SESSION *session, char *host, int port, int *bound_port, int queue_maxsize);
-
-LIBSSH2_LISTENER * 
-libssh2_channel_forward_listen(LIBSSH2_SESSION *session, int port);
-
-.SH DESCRIPTION
-Instruct the remote SSH server to begin listening for inbound TCP/IP
-connections. New connections will be queued by the library until accepted by
-\fIlibssh2_channel_forward_accept(3)\fP.
-
-\fIsession\fP - instance as returned by libssh2_session_init(). 
-
-\fIhost\fP - specific address to bind to on the remote host. Binding to
-0.0.0.0 (default when NULL is passed) will bind to all available addresses.
-
-\fIport\fP - port to bind to on the remote host. When 0 is passed, the remote
-host will select the first available dynamic port.
-
-\fIbound_port\fP - Populated with the actual port bound on the remote
-host. Useful when requesting dynamic port numbers.
-
-\fIqueue_maxsize\fP - Maximum number of pending connections to queue before
-rejecting further attempts.
-
-\fIlibssh2_channel_forward_listen(3)\fP is a macro.
-.SH RETURN VALUE
-A newly allocated LIBSSH2_LISTENER instance or NULL on failure.
-.SH ERRORS
-\fILIBSSH2_ERROR_ALLOC\fP - An internal memory allocation call failed.
-
-\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
-
-\fILIBSSH2_ERROR_PROTO\fP - An invalid SSH protocol response was received on the socket.
-
-\fILIBSSH2_ERROR_REQUEST_DENIED\fP - The remote server refused the request.
-
-\fILIBSSH2_ERROR_EAGAIN\fP - Marked for non-blocking I/O but the call would block.
-.SH SEE ALSO
-.BR libssh2_channel_forward_accept(3)
--- a/docs/libssh2_channel_free.3
+++ b/docs/libssh2_channel_free.3
@ -1,25 +0,0 @@
-.TH libssh2_channel_free 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_free - free all resources associated with a channel
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int 
-libssh2_channel_free(LIBSSH2_CHANNEL *channel);
-
-.SH DESCRIPTION
-\fIchannel\fP - Channel stream to free.
-
-Release all resources associated with a channel stream. If the channel has 
-not yet been closed with 
-.BR libssh2_channel_close(3)
-, it will be called automatically so that the remote end may know that it 
-can safely free its own resources.
-
-.SH RETURN VALUE
-Return 0 on success or negative on failure.  It returns
-LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
-LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
-
-.SH SEE ALSO
-.BR libssh2_channel_close(3)
--- a/docs/libssh2_channel_get_exit_signal.3
+++ b/docs/libssh2_channel_get_exit_signal.3
@ -1,34 +0,0 @@
-.TH libssh2_channel_get_exit_signal 3 "4 Oct 2010" "libssh2 1.2.8" "libssh2 manual"
-.SH NAME
-libssh2_channel_get_exit_signal - get the remote exit signal
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int 
-libssh2_channel_get_exit_signal(LIBSSH2_CHANNEL *channel, char **exitsignal, size_t *exitsignal_len, char **errmsg, size_t *errmsg_len, char **langtag, size_t *langtag_len);
-
-.SH DESCRIPTION
-\fIchannel\fP - Closed channel stream to retrieve exit signal from.
-
-\fIexitsignal\fP - If not NULL, is populated by reference with the exit signal
-(without leading "SIG"). Note that the string is stored in a newly allocated
-buffer. If the remote program exited cleanly, the referenced string pointer
-will be set to NULL. 
-
-\fIexitsignal_len\fP - If not NULL, is populated by reference with the length
-of exitsignal. 
-
-\fIerrmsg\fP - If not NULL, is populated by reference with the error message
-(if provided by remote server, if not it will be set to NULL). Note that the
-string is stored in a newly allocated buffer.
-
-\fIerrmsg_len\fP - If not NULL, is populated by reference with the length of errmsg.
-
-\fIlangtag\fP - If not NULL, is populated by reference with the language tag 
-(if provided by remote server, if not it will be set to NULL). Note that the
-string is stored in a newly allocated buffer.
-
-\fIlangtag_len\fP - If not NULL, is populated by reference with the length of langtag.
-
-.SH RETURN VALUE
-Numeric error code corresponding to the the Error Code constants.
--- a/docs/libssh2_channel_get_exit_status.3
+++ b/docs/libssh2_channel_get_exit_status.3
@ -1,18 +0,0 @@
-.TH libssh2_channel_get_exit_status 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_get_exit_status - get the remote exit code
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int 
-libssh2_channel_get_exit_status(LIBSSH2_CHANNEL* channel)
-
-.SH DESCRIPTION
-\fIchannel\fP - Closed channel stream to retrieve exit status from.
-
-Returns the exit code raised by the process running on the remote host at 
-the other end of the named channel. Note that the exit status may not be 
-available if the remote end has not yet set its status to closed.
-
-.SH RETURN VALUE
-Returns 0 on failure, otherwise the \fIExit Status\fP reported by remote host
--- a/docs/libssh2_channel_handle_extended_data.3
+++ b/docs/libssh2_channel_handle_extended_data.3
@ -1,35 +0,0 @@
-.TH libssh2_channel_handle_extended_data 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_handle_extended_data - set extended data handling mode
-.SH SYNOPSIS
-#include <libssh2.h>
-
-void 
-libssh2_channel_handle_extended_data(LIBSSH2_CHANNEL *channel, int ignore_mode);
-
-.SH DESCRIPTION
-This function is deprecated. Use the
-\fIlibssh2_channel_handle_extended_data2(3)\fP function instead!
-
-\fIchannel\fP - Active channel stream to change extended data handling on.
-
-\fIignore_mode\fP - One of the three LIBSSH2_CHANNEL_EXTENDED_DATA_* Constants.
-.br
-\fBLIBSSH2_CHANNEL_EXTENDED_DATA_NORMAL\fP: Queue extended data for eventual 
-reading
-.br
-\fBLIBSSH2_CHANNEL_EXTENDED_DATA_MERGE\fP: Treat extended data and ordinary
-data the same. Merge all substreams such that calls to
-\fIlibssh2_channel_read(3)\fP will pull from all substreams on a
-first-in/first-out basis.
-.br
-\fBLIBSSH2_CHANNEL_EXTENDED_DATA_IGNORE\fP: Discard all extended data as it 
-arrives.
-
-Change how a channel deals with extended data packets. By default all extended
-data is queued until read by \fIlibssh2_channel_read_ex(3)\fP
-.SH RETURN VALUE
-None.
-.SH SEE ALSO
-.BR libssh2_channel_handle_extended_data2(3)
-.BR libssh2_channel_read_ex(3)
--- a/docs/libssh2_channel_handle_extended_data2.3
+++ b/docs/libssh2_channel_handle_extended_data2.3
@ -1,35 +0,0 @@
-.TH libssh2_channel_handle_extended_data2 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_handle_extended_data2 - set extended data handling mode
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int 
-libssh2_channel_handle_extended_data2(LIBSSH2_CHANNEL *channel, int ignore_mode);
-
-.SH DESCRIPTION
-\fIchannel\fP - Active channel stream to change extended data handling on.
-
-\fIignore_mode\fP - One of the three LIBSSH2_CHANNEL_EXTENDED_DATA_* Constants.
-.br
-\fBLIBSSH2_CHANNEL_EXTENDED_DATA_NORMAL\fP: Queue extended data for eventual 
-reading
-.br
-\fBLIBSSH2_CHANNEL_EXTENDED_DATA_MERGE\fP: Treat extended data and ordinary 
-data the same. Merge all substreams such that calls to 
-.BR libssh2_channel_read(3)
-will pull from all substreams on a first-in/first-out basis.
-.br
-\fBLIBSSH2_CHANNEL_EXTENDED_DATA_IGNORE\fP: Discard all extended data as it 
-arrives.
-
-Change how a channel deals with extended data packets. By default all 
-extended data is queued until read by 
-.BR libssh2_channel_read_ex(3)
-
-.SH RETURN VALUE
-Return 0 on success or LIBSSH2_ERROR_EAGAIN when it would otherwise block.
-
-.SH SEE ALSO
-.BR libssh2_channel_handle_extended_data(3)
-.BR libssh2_channel_read_ex(3)
--- a/docs/libssh2_channel_ignore_extended_data.3
+++ b/docs/libssh2_channel_ignore_extended_data.3
@ -1,20 +0,0 @@
-.TH libssh2_channel_ignore_extended_data 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
-.SH NAME
-libssh2_channel_ignore_extended_data - convenience macro for \fIlibssh2_channel_handle_extended_data(3)\fP calls
-.SH SYNOPSIS
-#include <libssh2.h>
-
-libssh2_channel_ignore_extended_data(arguments)
-
-.SH DESCRIPTION
-This function is deprecated. Use the
-\fIlibssh2_channel_handle_extended_data2(3)\fP function instead!
-
-This is a macro defined in a public libssh2 header file that is using the
-underlying function \fIlibssh2_channel_handle_extended_data(3)\fP.
-.SH RETURN VALUE
-See \fIlibssh2_channel_handle_extended_data(3)\fP
-.SH ERRORS
-See \fIlibssh2_channel_handle_extended_data(3)\fP
-.SH SEE ALSO
-.BR libssh2_channel_handle_extended_data(3)
--- a/docs/libssh2_channel_open_ex.3
+++ b/docs/libssh2_channel_open_ex.3
@ -1,54 +0,0 @@
-.TH libssh2_channel_open_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_open_ex - establish a generic session channel
-.SH SYNOPSIS
-#include <libssh2.h>
-
-LIBSSH2_CHANNEL *
-libssh2_channel_open_ex(LIBSSH2_SESSION *session, const char *channel_type, unsigned int channel_type_len, unsigned int window_size, unsigned int packet_size, const char *message, unsigned int message_len);
-
-LIBSSH2_CHANNEL *
-libssh2_channel_open_session(session);
-
-.SH DESCRIPTION
-\fIsession\fP - Session instance as returned by 
-.BR libssh2_session_init_ex(3)
-
-\fIchannel_type\fP - Channel type to open. Typically one of session, 
-direct-tcpip, or tcpip-forward. The SSH2 protocol allowed for additional 
-types including local, custom channel types.
-
-\fIchannel_type_len\fP - Length of channel_type
-
-\fIwindow_size\fP - Maximum amount of unacknowledged data remote host is 
-allowed to send before receiving an SSH_MSG_CHANNEL_WINDOW_ADJUST packet.
-
-\fIpacket_size\fP - Maximum number of bytes remote host is allowed to send 
-in a single SSH_MSG_CHANNEL_DATA or SSG_MSG_CHANNEL_EXTENDED_DATA packet.
-
-\fImessage\fP - Additional data as required by the selected channel_type.
-
-\fImessage_len\fP - Length of message parameter.
-
-Allocate a new channel for exchanging data with the server. This method is 
-typically called through its macroized form: 
-.BR libssh2_channel_open_session(3)
-or via 
-.BR libssh2_channel_direct_tcpip(3)
-or
-.BR libssh2_channel_forward_listen(3)
-
-.SH RETURN VALUE
-Pointer to a newly allocated LIBSSH2_CHANNEL instance, or NULL on errors.
-
-.SH ERRORS
-\fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
-
-\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
-
-\fILIBSSH2_ERROR_CHANNEL_FAILURE\fP - 
-
-\fILIBSSH2_ERROR_EAGAIN\fP - Marked for non-blocking I/O but the call would block.
-
-.SH SEE ALSO
-Add related functions
--- a/docs/libssh2_channel_open_session.3
+++ b/docs/libssh2_channel_open_session.3
@ -1,18 +0,0 @@
-.TH libssh2_channel_open_session 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
-.SH NAME
-libssh2_channel_open_session - convenience macro for \fIlibssh2_channel_open_ex(3)\fP calls
-.SH SYNOPSIS
-#include <libssh2.h>
-
-LIBSSH2_CHANNEL *
-libssh2_channel_open_session(LIBSSH2_SESSION *session);
-
-.SH DESCRIPTION
-This is a macro defined in a public libssh2 header file that is using the
-underlying function \fIlibssh2_channel_open_ex(3)\fP.
-.SH RETURN VALUE
-See \fIlibssh2_channel_open_ex(3)\fP
-.SH ERRORS
-See \fIlibssh2_channel_open_ex(3)\fP
-.SH SEE ALSO
-.BR libssh2_channel_open_ex(3)
--- a/docs/libssh2_channel_process_startup.3
+++ b/docs/libssh2_channel_process_startup.3
@ -1,38 +0,0 @@
-.TH libssh2_channel_process_startup 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_process_startup - request a shell on a channel
-.SH SYNOPSIS
-.nf
-#include <libssh2.h>
-
-int libssh2_channel_process_startup(LIBSSH2_CHANNEL *channel,
-                                    const char *request,
-                                    unsigned int request_len,
-                                    const char *message,
-                                    unsigned int message_len);
-.SH DESCRIPTION
-\fIchannel\fP - Active session channel instance.
-
-\fIrequest\fP - Type of process to startup. The SSH2 protocol currently 
-defines shell, exec, and subsystem as standard process services.
-
-\fIrequest_len\fP - Length of request parameter.
-
-\fImessage\fP - Request specific message data to include.
-
-\fImessage_len\fP - Length of message parameter.
-
-Initiate a request on a session type channel such as returned by 
-.BR libssh2_channel_open_ex(3)
-.SH RETURN VALUE
-Return 0 on success or negative on failure.  It returns
-LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
-LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
-.SH ERRORS
-\fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
-
-\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
-
-\fILIBSSH2_ERROR_CHANNEL_REQUEST_DENIED\fP - 
-.SH SEE ALSO
-.BR libssh2_channel_open_ex(3)
--- a/docs/libssh2_channel_read.3
+++ b/docs/libssh2_channel_read.3
@ -1,17 +0,0 @@
-.TH libssh2_channel_read 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
-.SH NAME
-libssh2_channel_read - convenience macro for \fIlibssh2_channel_read_ex(3)\fP calls
-.SH SYNOPSIS
-#include <libssh2.h>
-
-ssize_t libssh2_channel_read(LIBSSH2_CHANNEL *channel, char *buf, size_t buflen);
-
-.SH DESCRIPTION
-This is a macro defined in a public libssh2 header file that is using the
-underlying function \fIlibssh2_channel_read_ex(3)\fP.
-.SH RETURN VALUE
-See \fIlibssh2_channel_read_ex(3)\fP
-.SH ERRORS
-See \fIlibssh2_channel_read_ex(3)\fP
-.SH SEE ALSO
-.BR libssh2_channel_read_ex(3)
--- a/docs/libssh2_channel_read_ex.3
+++ b/docs/libssh2_channel_read_ex.3
@ -1,45 +0,0 @@
-.TH libssh2_channel_read_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_read_ex - read data from a channel stream
-.SH SYNOPSIS
-#include <libssh2.h>
-
-ssize_t
-libssh2_channel_read_ex(LIBSSH2_CHANNEL *channel, int stream_id, char *buf, size_t buflen);
-
-ssize_t
-libssh2_channel_read(LIBSSH2_CHANNEL *channel, char *buf, size_t buflen);
-
-ssize_t
-libssh2_channel_read_stderr(LIBSSH2_CHANNEL *channel, char *buf, size_t buflen);
-
-.SH DESCRIPTION
-Attempt to read data from an active channel stream. All channel streams have
-one standard I/O substream (stream_id == 0), and may have up to 2^32 extended
-data streams as identified by the selected \fIstream_id\fP. The SSH2 protocol
-currently defines a stream ID of 1 to be the stderr substream.
-
-\fIchannel\fP - active channel stream to read from. 
-
-\fIstream_id\fP - substream ID number (e.g. 0 or SSH_EXTENDED_DATA_STDERR) 
-
-\fIbuf\fP - pointer to storage buffer to read data into
-
-\fIbuflen\fP - size of the buf storage
-
-\fIlibssh2_channel_read(3)\fP and \fIlibssh2_channel_read_stderr(3)\fP are
-macros.
-.SH RETURN VALUE
-Actual number of bytes read or negative on failure. It returns
-LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
-LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
-
-Note that a return value of zero (0) can in fact be a legitimate value and
-only signals that no payload data was read. It is not an error.
-.SH ERRORS
-\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
-
-\fILIBSSH2_ERROR_CHANNEL_CLOSED\fP - The channel has been closed.
-
-.SH SEE ALSO
-.BR libssh2_poll_channel_read(3)
--- a/docs/libssh2_channel_read_stderr.3
+++ b/docs/libssh2_channel_read_stderr.3
@ -1,17 +0,0 @@
-.TH libssh2_channel_read_stderr 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
-.SH NAME
-libssh2_channel_read_stderr - convenience macro for \fIlibssh2_channel_read_ex(3)\fP calls
-.SH SYNOPSIS
-#include <libssh2.h>
-
-ssize_t libssh2_channel_read_stderr(LIBSSH2_CHANNEL *channel, char *buf, size_t buflen);
-
-.SH DESCRIPTION
-This is a macro defined in a public libssh2 header file that is using the
-underlying function \fIlibssh2_channel_read_ex(3)\fP.
-.SH RETURN VALUE
-See \fIlibssh2_channel_read_ex(3)\fP
-.SH ERRORS
-See \fIlibssh2_channel_read_ex(3)\fP
-.SH SEE ALSO
-.BR libssh2_channel_read_ex(3)
--- a/docs/libssh2_channel_receive_window_adjust.3
+++ b/docs/libssh2_channel_receive_window_adjust.3
@ -1,29 +0,0 @@
-.TH libssh2_channel_receive_window_adjust 3 "15 Mar 2009" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_receive_window_adjust - adjust the channel window
-.SH SYNOPSIS
-#include <libssh2.h>
-
-unsigned long
-libssh2_channel_receive_window_adjust(LIBSSH2_CHANNEL * channel,
-                                      unsigned long adjustment,
-                                      unsigned char force);
-
-.SH DESCRIPTION
-This function is deprecated in 1.1. Use
-\fIlibssh2_channel_receive_window_adjust2(3)\fP!
-
-Adjust the receive window for a channel by adjustment bytes. If the amount to
-be adjusted is less than LIBSSH2_CHANNEL_MINADJUST and force is 0 the
-adjustment amount will be queued for a later packet.
-.SH RETURN VALUE
-Returns the new size of the receive window (as understood by remote end). Note
-that the window value sent over the wire is strictly 32bit, but this API is
-made to return a 'long' which may not be 32 bit on all platforms.
-.SH ERRORS
-In 1.0 and earlier, this function returns LIBSSH2_ERROR_EAGAIN for
-non-blocking channels where it would otherwise block. However, that is a
-negative number and this function only returns an unsigned value and this then
-leads to a very strange value being returned.
-.SH SEE ALSO
-.BR libssh2_channel_window_read_ex(3)
--- a/docs/libssh2_channel_receive_window_adjust2.3
+++ b/docs/libssh2_channel_receive_window_adjust2.3
@ -1,27 +0,0 @@
-.TH libssh2_channel_receive_window_adjust2 3 "26 Mar 2009" "libssh2 1.1" "libssh2 manual"
-.SH NAME
-libssh2_channel_receive_window_adjust2 - adjust the channel window
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int
-libssh2_channel_receive_window_adjust2(LIBSSH2_CHANNEL * channel,
-                                       unsigned long adjustment,
-                                       unsigned char force,
-                                       unsigned int *window);
-
-.SH DESCRIPTION
-Adjust the receive window for a channel by adjustment bytes. If the amount to
-be adjusted is less than LIBSSH2_CHANNEL_MINADJUST and force is 0 the
-adjustment amount will be queued for a later packet.
-
-This function stores the new size of the receive window (as understood by
-remote end) in the variable 'window' points to.
-.SH RETURN VALUE
-Return 0 on success and a negative value on error. If used in non-blocking
-mode it will return LIBSSH2_ERROR_EAGAIN when it would otherwise block.
-.SH ERRORS
-.SH AVAILABILITY
-Added in libssh2 1.1 since the previous API has deficiencies.
-.SH SEE ALSO
-.BR libssh2_channel_window_read_ex(3)
--- a/docs/libssh2_channel_request_pty.3
+++ b/docs/libssh2_channel_request_pty.3
@ -1,17 +0,0 @@
-.TH libssh2_channel_request_pty 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
-.SH NAME
-libssh2_channel_request_pty - convenience macro for \fIlibssh2_channel_request_pty_ex(3)\fP calls
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int libssh2_channel_request_pty(LIBSSH2_SESSION *session, const char *term);
-
-.SH DESCRIPTION
-This is a macro defined in a public libssh2 header file that is using the
-underlying function \fIlibssh2_channel_request_pty_ex(3)\fP.
-.SH RETURN VALUE
-See \fIlibssh2_channel_request_pty_ex(3)\fP
-.SH ERRORS
-See \fIlibssh2_channel_request_pty_ex(3)\fP
-.SH SEE ALSO
-.BR libssh2_channel_request_pty_ex(3)
--- a/docs/libssh2_channel_request_pty_ex.3
+++ b/docs/libssh2_channel_request_pty_ex.3
@ -1,47 +0,0 @@
-.TH libssh2_channel_request_pty_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_request_pty_ex - short function description
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int 
-libssh2_channel_request_pty_ex(LIBSSH2_CHANNEL *channel, const char *term, unsigned int term_len, const char *modes, unsigned int modes_len, int width, int height, int width_px, int height_px);
-
-int 
-libssh2_channel_request_pty(LIBSSH2_CHANNEL *channel, char *term);
-
-.SH DESCRIPTION
-\fIchannel\fP - Previously opened channel instance such as returned by 
-.BR libssh2_channel_open_ex(3)
-
-\fIterm\fP - Terminal emulation (e.g. vt102, ansi, etc...)
-
-\fIterm_len\fP - Length of term parameter
-
-\fImodes\fP - Terminal mode modifier values
-
-\fImodes_len\fP - Length of modes parameter.
-
-\fIwidth\fP - Width of pty in characters
-
-\fIheight\fP - Height of pty in characters
-
-\fIwidth_px\fP - Width of pty in pixels
-
-\fIheight_px\fP - Height of pty in pixels
-
-Request a PTY on an established channel. Note that this does not make sense 
-for all channel types and may be ignored by the server despite returning 
-success.
-.SH RETURN VALUE
-Return 0 on success or negative on failure.  It returns
-LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
-LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
-.SH ERRORS
-\fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
-
-\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
-
-\fILIBSSH2_ERROR_CHANNEL_REQUEST_DENIED\fP - 
-.SH SEE ALSO
-.BR libssh2_channel_open_ex(3)
--- a/docs/libssh2_channel_request_pty_size.3
+++ b/docs/libssh2_channel_request_pty_size.3
@ -1,17 +0,0 @@
-.TH libssh2_channel_request_pty_size 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
-.SH NAME
-libssh2_channel_request_pty_size - convenience macro for \fIlibssh2_channel_request_pty_size_ex(3)\fP calls
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int libssh2_channel_request_pty_size(LIBSSH2_CHANNEL *channel, int width, int height);
-
-.SH DESCRIPTION
-This is a macro defined in a public libssh2 header file that is using the
-underlying function \fIlibssh2_channel_request_pty_size_ex(3)\fP.
-.SH RETURN VALUE
-See \fIlibssh2_channel_request_pty_size_ex(3)\fP
-.SH ERRORS
-See \fIlibssh2_channel_request_pty_size_ex(3)\fP
-.SH SEE ALSO
-.BR libssh2_channel_request_pty_size_ex(3)
--- a/docs/libssh2_channel_request_pty_size_ex.3
+++ b/docs/libssh2_channel_request_pty_size_ex.3
@ -1,12 +0,0 @@
-.TH libssh2_channel_request_pty_size_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_request_pty_size_ex - TODO
-.SH SYNOPSIS
-
-.SH DESCRIPTION
-
-.SH RETURN VALUE
-
-.SH ERRORS
-
-.SH SEE ALSO
--- a/docs/libssh2_channel_send_eof.3
+++ b/docs/libssh2_channel_send_eof.3
@ -1,24 +0,0 @@
-.TH libssh2_channel_send_eof 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_send_eof - send EOF to remote server
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int 
-libssh2_channel_send_eof(LIBSSH2_CHANNEL *channel);
-
-.SH DESCRIPTION
-Tell the remote host that no further data will be sent on the specified 
-channel. Processes typically interpret this as a closed stdin descriptor.
-
-.SH RETURN VALUE
-Return 0 on success or negative on failure.  It returns
-LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
-LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
-
-.SH ERRORS
-\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
-
-.SH SEE ALSO
-.BR libssh2_channel_wait_eof(3)
-.BR libssh2_channel_eof(3)
--- a/docs/libssh2_channel_set_blocking.3
+++ b/docs/libssh2_channel_set_blocking.3
@ -1,23 +0,0 @@
-.TH libssh2_channel_set_blocking 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_set_blocking - set or clear blocking mode on channel
-.SH SYNOPSIS
-#include <libssh2.h>
-
-void 
-libssh2_channel_set_blocking(LIBSSH2_CHANNEL *channel, int blocking);
-.SH DESCRIPTION
-\fIchannel\fP - channel stream to set or clean blocking status on.
-
-\fIblocking\fP - Set to a non-zero value to make the channel block, or zero to
-make it non-blocking.
-
-Currently this is just a short cut call to 
-.BR libssh2_session_set_blocking(3)
-and therefore will affect the session and all channels.
-.SH RETURN VALUE
-None
-.SH SEE ALSO
-.BR libssh2_session_set_blocking(3)
-.BR libssh2_channel_read_ex(3)
-.BR libssh2_channel_write_ex(3)
--- a/docs/libssh2_channel_setenv.3
+++ b/docs/libssh2_channel_setenv.3
@ -1,17 +0,0 @@
-.TH libssh2_channel_setenv 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
-.SH NAME
-libssh2_channel_setenv - convenience macro for \fIlibssh2_channel_setenv_ex(3)\fP calls
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int libssh2_channel_setenv(LIBSSH2_CHANNEL *channel, const char *varname, const char *value);
-
-.SH DESCRIPTION
-This is a macro defined in a public libssh2 header file that is using the
-underlying function \fIlibssh2_channel_setenv_ex(3)\fP.
-.SH RETURN VALUE
-See \fIlibssh2_channel_setenv_ex(3)\fP
-.SH ERRORS
-See \fIlibssh2_channel_setenv_ex(3)\fP
-.SH SEE ALSO
-.BR libssh2_channel_setenv_ex(3)
--- a/docs/libssh2_channel_setenv_ex.3
+++ b/docs/libssh2_channel_setenv_ex.3
@ -1,41 +0,0 @@
-.TH libssh2_channel_setenv_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_setenv_ex - set an environment variable on the channel
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int
-libssh2_channel_setenv_ex(LIBSSH2_CHANNEL *channel, char *varname, unsigned int varname_len, const char *value, unsigned int value_len);
-
-int
-libssh2_channel_setenv(LIBSSH2_CHANNEL *channel, char *varname, const char *value);
-
-.SH DESCRIPTION
-\fIchannel\fP - Previously opened channel instance such as returned by 
-.BR libssh2_channel_open_ex(3)
-
-\fIvarname\fP - Name of environment variable to set on the remote 
-channel instance.
-
-\fIvarname_len\fP - Length of passed varname parameter.
-
-\fIvalue\fP - Value to set varname to.
-
-\fIvalue_len\fP - Length of value parameter.
-
-Set an environment variable in the remote channel's process space. Note that
-this does not make sense for all channel types and may be ignored by the
-server despite returning success.
-.SH RETURN VALUE
-Return 0 on success or negative on failure.  It returns
-LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
-LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
-
-.SH ERRORS
-\fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
-
-\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
-
-\fILIBSSH2_ERROR_CHANNEL_REQUEST_DENIED\fP - 
-.SH SEE ALSO
-.BR libssh2_channel_open_ex(3)
--- a/docs/libssh2_channel_shell.3
+++ b/docs/libssh2_channel_shell.3
@ -1,17 +0,0 @@
-.TH libssh2_channel_shell 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
-.SH NAME
-libssh2_channel_shell - convenience macro for \fIlibssh2_channel_process_startup(3)\fP calls
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int libssh2_channel_shell(LIBSSH2_CHANNEL *channel);
-
-.SH DESCRIPTION
-This is a macro defined in a public libssh2 header file that is using the
-underlying function \fIlibssh2_channel_process_startup(3)\fP.
-.SH RETURN VALUE
-See \fIlibssh2_channel_process_startup(3)\fP
-.SH ERRORS
-See \fIlibssh2_channel_process_startup(3)\fP
-.SH SEE ALSO
-.BR libssh2_channel_process_startup(3)
--- a/docs/libssh2_channel_subsystem.3
+++ b/docs/libssh2_channel_subsystem.3
@ -1,17 +0,0 @@
-.TH libssh2_channel_subsystem 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
-.SH NAME
-libssh2_channel_subsystem - convenience macro for \fIlibssh2_channel_process_startup(3)\fP calls
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int libssh2_channel_subsystem(LIBSSH2_CHANNEL *channel, const char *subsystem);
-
-.SH DESCRIPTION
-This is a macro defined in a public libssh2 header file that is using the
-underlying function \fIlibssh2_channel_process_startup(3)\fP.
-.SH RETURN VALUE
-See \fIlibssh2_channel_process_startup(3)\fP
-.SH ERRORS
-See \fIlibssh2_channel_process_startup(3)\fP
-.SH SEE ALSO
-.BR libssh2_channel_process_startup(3)
--- a/docs/libssh2_channel_wait_closed.3
+++ b/docs/libssh2_channel_wait_closed.3
@ -1,22 +0,0 @@
-.TH libssh2_channel_wait_closed 3 "29 Nov 2007" "libssh2 0.19" "libssh2 manual"
-.SH NAME
-libssh2_channel_wait_closed - wait for the remote to close the channel
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int 
-libssh2_channel_wait_closed(LIBSSH2_CHANNEL *channel);
-
-.SH DESCRIPTION
-Enter a temporary blocking state until the remote host closes the named
-channel. Typically sent after \fIlibssh2_channel_close(3)\fP in order to
-examine the exit status.
-
-.SH RETURN VALUE
-Return 0 on success or negative on failure. It returns LIBSSH2_ERROR_EAGAIN
-when it would otherwise block. While LIBSSH2_ERROR_EAGAIN is a negative
-number, it isn't really a failure per se.
-.SH SEE ALSO
-.BR libssh2_channel_send_eof(3)
-.BR libssh2_channel_eof(3)
-.BR libssh2_channel_wait_eof(3)
--- a/docs/libssh2_channel_wait_eof.3
+++ b/docs/libssh2_channel_wait_eof.3
@ -1,19 +0,0 @@
-.TH libssh2_channel_wait_eof 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_wait_eof - wait for the remote to reply to an EOF request
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int 
-libssh2_channel_wait_eof(LIBSSH2_CHANNEL *channel);
-
-.SH DESCRIPTION
-Wait for the remote end to acknowledge an EOF request.
-
-.SH RETURN VALUE
-Return 0 on success or negative on failure. It returns
-LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
-LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
-.SH SEE ALSO
-.BR libssh2_channel_send_eof(3)
-.BR libssh2_channel_eof(3)
--- a/docs/libssh2_channel_window_read.3
+++ b/docs/libssh2_channel_window_read.3
@ -1,17 +0,0 @@
-.TH libssh2_channel_window_read 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
-.SH NAME
-libssh2_channel_window_read - convenience macro for \fIlibssh2_channel_window_read_ex(3)\fP calls
-.SH SYNOPSIS
-#include <libssh2.h>
-
-unsigned long libssh2_channel_window_read(LIBSSH2_CHANNEL *channel);
-
-.SH DESCRIPTION
-This is a macro defined in a public libssh2 header file that is using the
-underlying function \fIlibssh2_channel_window_read_ex(3)\fP.
-.SH RETURN VALUE
-See \fIlibssh2_channel_window_read_ex(3)\fP
-.SH ERRORS
-See \fIlibssh2_channel_window_read_ex(3)\fP
-.SH SEE ALSO
-.BR libssh2_channel_window_read_ex(3)
--- a/docs/libssh2_channel_window_read_ex.3
+++ b/docs/libssh2_channel_window_read_ex.3
@ -1,24 +0,0 @@
-.TH libssh2_channel_window_read_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_window_read_ex - Check the status of the read window
-.SH SYNOPSIS
-#include <libssh2.h>
-
-unsigned long
-libssh2_channel_window_read_ex(LIBSSH2_CHANNEL *channel,
-                               unsigned long *read_avail,
-                               unsigned long *window_size_initial)
-.SH DESCRIPTION
-Check the status of the read window. Returns the number of bytes which the
-remote end may send without overflowing the window limit read_avail (if
-passed) will be populated with the number of bytes actually available to be
-read window_size_initial (if passed) will be populated with the
-window_size_initial as defined by the channel_open request
-.SH RETURN VALUE
-The number of bytes which the remote end may send without overflowing the
-window limit
-.SH ERRORS
-
-.SH SEE ALSO
-.BR libssh2_channel_receive_window_adjust(3),
-.BR libssh2_channel_window_write_ex(3)
--- a/docs/libssh2_channel_window_write.3
+++ b/docs/libssh2_channel_window_write.3
@ -1,17 +0,0 @@
-.TH libssh2_channel_window_write 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
-.SH NAME
-libssh2_channel_window_write - convenience macro for \fIlibssh2_channel_window_write_ex(3)\fP calls
-.SH SYNOPSIS
-#include <libssh2.h>
-
-unsigned long libssh2_channel_window_write(LIBSSH2_CHANNEL *channel);
-
-.SH DESCRIPTION
-This is a macro defined in a public libssh2 header file that is using the
-underlying function \fIlibssh2_channel_window_write_ex(3)\fP.
-.SH RETURN VALUE
-See \fIlibssh2_channel_window_write_ex(3)\fP
-.SH ERRORS
-See \fIlibssh2_channel_window_write_ex(3)\fP
-.SH SEE ALSO
-.BR libssh2_channel_window_write_ex(3)
--- a/docs/libssh2_channel_window_write_ex.3
+++ b/docs/libssh2_channel_window_write_ex.3
@ -1,21 +0,0 @@
-.TH libssh2_channel_window_write_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_window_write_ex - Check the status of the write window
-.SH SYNOPSIS
-#include <libssh2.h>
-
-unsigned long
-libssh2_channel_window_write_ex(LIBSSH2_CHANNEL *channel,
-                                unsigned long *window_size_initial)
-.SH DESCRIPTION
-Check the status of the write window Returns the number of bytes which may be
-safely written on the channel without blocking. 'window_size_initial' (if
-passed) will be populated with the size of the initial window as defined by
-the channel_open request
-.SH RETURN VALUE
-Number of bytes which may be safely written on the channel without blocking.
-.SH ERRORS
-
-.SH SEE ALSO
-.BR libssh2_channel_window_read_ex(3),
-.BR libssh2_channel_receive_window_adjust(3)
--- a/docs/libssh2_channel_write.3
+++ b/docs/libssh2_channel_write.3
@ -1,18 +0,0 @@
-.TH libssh2_channel_write 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
-.SH NAME
-libssh2_channel_write - convenience macro for \fIlibssh2_channel_write_ex(3)\fP
-.SH SYNOPSIS
-.nf
-#include <libssh2.h>
-
-ssize_t libssh2_channel_write(LIBSSH2_CHANNEL *channel, const char *buf, size_t buflen);
-
-.SH DESCRIPTION
-This is a macro defined in a public libssh2 header file that is using the
-underlying function \fIlibssh2_channel_write_ex(3)\fP.
-.SH RETURN VALUE
-See \fIlibssh2_channel_write_ex(3)\fP
-.SH ERRORS
-See \fIlibssh2_channel_write_ex(3)\fP
-.SH SEE ALSO
-.BR libssh2_channel_write_ex(3)
--- a/docs/libssh2_channel_write_ex.3
+++ b/docs/libssh2_channel_write_ex.3
@ -1,47 +0,0 @@
-.TH libssh2_channel_write_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_write_ex - write data to a channel stream blocking
-.SH SYNOPSIS
-.nf
-#include <libssh2.h>
-
-ssize_t libssh2_channel_write_ex(LIBSSH2_CHANNEL *channel,
-                                 int stream_id, char *buf,
-                                 size_t buflen);
-.SH DESCRIPTION
-Write data to a channel stream. All channel streams have one standard I/O
-substream (stream_id == 0), and may have up to 2^32 extended data streams as
-identified by the selected \fIstream_id\fP. The SSH2 protocol currently
-defines a stream ID of 1 to be the stderr substream.
-
-\fIchannel\fP - active channel stream to write to. 
-
-\fIstream_id\fP - substream ID number (e.g. 0 or SSH_EXTENDED_DATA_STDERR) 
-
-\fIbuf\fP - pointer to buffer to write
-
-\fIbuflen\fP - size of the data to write
-
-\fIlibssh2_channel_write(3)\fP and \fIlibssh2_channel_write_stderr(3)\fP are
-convenience macros for this function.
-
-\fIlibssh2_channel_write_ex(3)\fP will use as much as possible of the buffer
-and put it into a single SSH protocol packet. This means that to get maximum
-performance when sending larger files, you should try to always pass in at
-least 32K of data to this function.
-.SH RETURN VALUE
-Actual number of bytes written or negative on failure.
-LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
-LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
-.SH ERRORS
-\fILIBSSH2_ERROR_ALLOC\fP - An internal memory allocation call failed.
-
-\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
-
-\fILIBSSH2_ERROR_CHANNEL_CLOSED\fP - The channel has been closed.
-
-\fILIBSSH2_ERROR_CHANNEL_EOF_SENT\fP - The channel has been requested to be
-closed.
-.SH SEE ALSO
-.BR libssh2_channel_open_ex(3)
-.BR libssh2_channel_read_ex(3)
--- a/docs/libssh2_channel_write_stderr.3
+++ b/docs/libssh2_channel_write_stderr.3
@ -1,18 +0,0 @@
-.TH libssh2_channel_write_stderr 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
-.SH NAME
-libssh2_channel_write_stderr - convenience macro for \fIlibssh2_channel_write_ex(3)\fP
-.SH SYNOPSIS
-.nf
-#include <libssh2.h>
-
-ssize_t libssh2_channel_write_stderr(LIBSSH2_CHANNEL *channel, const char *buf, size_t buflen);
-
-.SH DESCRIPTION
-This is a macro defined in a public libssh2 header file that is using the
-underlying function \fIlibssh2_channel_write_ex(3)\fP.
-.SH RETURN VALUE
-See \fIlibssh2_channel_write_ex(3)\fP
-.SH ERRORS
-See \fIlibssh2_channel_write_ex(3)\fP
-.SH SEE ALSO
-.BR libssh2_channel_write_ex(3)
--- a/docs/libssh2_channel_x11_req.3
+++ b/docs/libssh2_channel_x11_req.3
@ -1,17 +0,0 @@
-.TH libssh2_channel_x11_req 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
-.SH NAME
-libssh2_channel_x11_req - convenience macro for \fIlibssh2_channel_x11_req_ex(3)\fP calls
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int libssh2_channel_x11_req(LIBSSH2_CHANNEL *channel, int screen_number);
-
-.SH DESCRIPTION
-This is a macro defined in a public libssh2 header file that is using the
-underlying function \fIlibssh2_channel_x11_req_ex(3)\fP.
-.SH RETURN VALUE
-See \fIlibssh2_channel_x11_req_ex(3)\fP
-.SH ERRORS
-See \fIlibssh2_channel_x11_req_ex(3)\fP
-.SH SEE ALSO
-.BR libssh2_channel_x11_req_ex(3)
--- a/docs/libssh2_channel_x11_req_ex.3
+++ b/docs/libssh2_channel_x11_req_ex.3
@ -1,44 +0,0 @@
-.TH libssh2_channel_x11_req_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
-.SH NAME
-libssh2_channel_x11_req_ex - request an X11 forwarding channel
-.SH SYNOPSIS
-#include <libssh2.h>
-
-int
-libssh2_channel_x11_req_ex(LIBSSH2_CHANNEL *channel, int single_connection, const char *auth_proto, const char *auth_cookie, int screen_number);
-
-int
-libssh2_channel_x11_req(LIBSSH2_CHANNEL *channel, int screen_number);
-
-.SH DESCRIPTION
-\fIchannel\fP - Previously opened channel instance such as returned by 
-.BR libssh2_channel_open_ex(3)
-
-\fIsingle_connection\fP - non-zero to only forward a single connection.
-
-\fIauth_proto\fP - X11 authentication protocol to use
-
-\fIauth_cookie\fP - the cookie (hexadecimal encoded).
-
-\fIscreen_number\fP - the XLL screen to forward
-
-Request an X11 forwarding on \fIchannel\fP. To use X11 forwarding, 
-.BR libssh2_session_callback_set(3)
-must first be called to set \fBLIBSSH2_CALLBACK_X11\fP. This callback will be
-invoked when the remote host accepts the X11 forwarding.
-
-.SH RETURN VALUE
-Return 0 on success or negative on failure.  It returns
-LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
-LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
-
-.SH ERRORS
-\fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
-
-\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
-
-\fILIBSSH2_ERROR_CHANNEL_REQUEST_DENIED\fP - 
-
-.SH SEE ALSO
-.BR libssh2_channel_open_ex(3)
-.BR libssh2_session_callback_set(3)
--- a/docs/libssh2_exit.3
+++ b/docs/libssh2_exit.3
@ -1,14 +0,0 @@
-.TH libssh2_exit 3 "19 Mar 2010" "libssh2 1.2.5" "libssh2 manual"
-.SH NAME
-libssh2_exit - global library deinitialization
-.SH SYNOPSIS
-#include <libssh2.h>
-
-void
-libssh2_exit(void);
-.SH DESCRIPTION
-Exit the libssh2 functions and free's all memory used internal.
-.SH AVAILABILITY
-Added in libssh2 1.2.5
-.SH SEE ALSO
-.BR libssh2_init(3)
--- a/docs/libssh2_free.3
+++ b/docs/libssh2_free.3
@ -1,19 +0,0 @@
-.TH libssh2_exit 3 "13 Oct 2010" "libssh2 1.2.8" "libssh2 manual"
-.SH NAME
-libssh2_free - deallocate libssh2 memory
-.SH SYNOPSIS
-#include <libssh2.h>
-
-void
-libssh2_free(LIBSSH2_SESSION *session, void *ptr);
-.SH DESCRIPTION
-Deallocate memory allocated by earlier call to libssh2 functions.  It
-uses the memory allocation callbacks provided by the application, if
-any.  Otherwise, this will just call free().
-
-This function is mostly useful under Windows when libssh2 is linked to
-one run-time library and the application to another.
-.SH AVAILABILITY
-Added in libssh2 1.2.8
-.SH SEE ALSO
-.BR libssh2_session_init_ex(3)
--- a/Show More
+++ b/Show More