Also tighten X509_cmp_time to reject more than three fractional
seconds in the time; and to reject trailing garbage after the offset.
CVE-2015-1789
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix loop in do_free_upto if cmsbio is NULL: this will happen when attempting
to verify and a digest is not recognised. Reported by Johannes Bauer.
CVE-2015-1792
Reviewed-by: Matt Caswell <matt@openssl.org>
Fix error handling in ssl_session_dup, as well as incorrect setting up of
the session ticket. Follow on from CVE-2015-1791.
Thanks to LibreSSL project for reporting these issues.
Conflicts:
ssl/ssl_sess.c
Reviewed-by: Tim Hudson <tjh@openssl.org>
It should not be possible for DTLS message fragments to span multiple
packets. However previously if the message header fitted exactly into one
packet, and the fragment body was in the next packet then this would work.
Obviously this would fail if packets get re-ordered mid-flight.
Reviewed-by: Tim Hudson <tjh@openssl.org>
In the event of an error in the HMAC function, leaks can occur because the
HMAC_CTX does not get cleaned up.
Thanks to the BoringSSL project for reporting this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit e43a13c807)
The function EC_POINT_is_on_curve does not return a boolean value.
It returns 1 if the point is on the curve, 0 if it is not, and -1
on error. Many usages within OpenSSL were incorrectly using this
function and therefore not correctly handling error conditions.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 68886be7e2)
This adds additional checks to the processing of extensions in a ClientHello
to ensure that either no extensions are present, or if they are then they
take up the exact amount of space expected.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Stephen Henson <steve@openssl.org>
Conflicts:
ssl/t1_lib.c
This fixes a memory leak that can occur whilst duplicating a BIO chain if
the call to CRYPTO_dup_ex_data() fails. It also fixes a second memory leak
where if a failure occurs after successfully creating the first BIO in the
chain, then the beginning of the new chain was not freed.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Stephen Henson <steve@openssl.org>
Conflicts:
crypto/bio/bio_lib.c
BUF_MEM_free() attempts to cleanse memory using memset immediately prior
to a free. This is at risk of being optimised away by the compiler, so
replace with a call to OPENSSL_cleanse() instead.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Stephen Henson <steve@openssl.org>
For librypto to be complete, the stuff in both crypto/ and engines/
have to be built. Doing 'make test' or 'make apps' from a clean
source tree failed to do so.
Corrected by using the new 'build_libcrypto' in the top Makefile.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit acaff3b797)
There's a need for a target that will build all of libcrypto, so let's
add 'build_libcrypto' that does this. For ortogonality, let's also
add 'build_libssl'. Have both also depend on 'libcrypto.pc' and
'libssl.pc' so those get built together with the libraries.
This makes 'all' depend on fewer things directly.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 177b5f9c82)
Conflicts:
Makefile.org
Remove a comment that suggested further clean up was required.
DH_free() performs the necessary cleanup.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit f3d889523e)
Ensure OPENSSL_cleanse() is called on the premaster secret value calculated for GOST.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit b7ee4815f2)
Conflicts:
ssl/s3_srvr.c
Ensure the Kerberos pre-master secret has OPENSSL_cleanse called on it.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
A BIGNUM can have the value of -0. The function BN_bn2hex fails to account
for this and can allocate a buffer one byte too short in the event of -0
being used, leading to a one byte buffer overrun. All usage within the
OpenSSL library is considered safe. Any security risk is considered
negligible.
With thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke and
Filip Palian for discovering and reporting this issue.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit c56353071d)
Conflicts:
crypto/bn/bn_print.c
The session object on the client side is initially created during
construction of the ClientHello. If the client is DTLS1.2 capable then it
will store 1.2 as the version for the session. However if the server is only
DTLS1.0 capable then when the ServerHello comes back the client switches to
using DTLS1.0 from then on. However the session version does not get
updated. Therefore when the client attempts to resume that session the
server throws an alert because of an incorrect protocol version.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 7322abf5ce)
Conflicts:
ssl/s3_clnt.c
Some tool chains (e.g. android) do not define IP_PMTUDISC_PROBE, and so
this build breaks.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 133dce447b)
objects.pl only looked for a space to see if the name could be
used as a C identifier. Improve the test to match the real C
rules.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 591b7aef05)
This is for consistency.
Additionally, have its presence define OPENSSL_SYS_WINDOWS as well.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 3f131556d6)
Conflicts:
e_os2.h
The code in bss_dgram.c checks if IP_MTUDISCOVER is defined, where it
should test for IP_MTU_DISCOVER
RT#3888
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 0baaff1a76)
If a NewSessionTicket is received by a multi-threaded client when
attempting to reuse a previous ticket then a race condition can occur
potentially leading to a double free of the ticket data.
CVE-2015-1791
This also fixes RT#3808 where a session ID is changed for a session already
in the client session cache. Since the session ID is the key to the cache
this breaks the cache access.
Parts of this patch were inspired by this Akamai change:
c0bf69a791
Reviewed-by: Rich Salz <rsalz@openssl.org>
dtls1_get_message has an |mt| variable which is the type of the message that
is being requested. If it is negative then any message type is allowed.
However the value of |mt| is not checked in one of the main code paths, so a
peer can send a message of a completely different type and it will be
processed as if it was the message type that we were expecting. This has
very little practical consequences because the current behaviour will still
fail when the format of the message isn't as expected.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 8c2b1d872b)
Also add more ciphersuite test coverage, and a negative test for
512-bit DHE.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 1ee85aab75)
The size of the SRP extension can never be negative (the variable
|size| is unsigned). Therefore don't check if it is less than zero.
RT#3862
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 9c89d29083)
The return value of i2d functions can be negative if an error occurs.
Therefore don't assign the return value to an unsigned type and *then*
check if it is negative.
RT#3862
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 90e7cdff3a)
The members of struct timeval on OpenVMS are unsigned. The logic for
calculating timeouts needs adjusting to deal with this.
RT#3862
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit fc52ac9028)
If the record received is for a version that we don't support, previously we
were sending an alert back. However if the incoming record already looks
like an alert then probably we shouldn't do that. So suppress an outgoing
alert if it looks like we've got one incoming.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
bn_get_bits5 was overstepping array boundary by 1 byte. It was exclusively
read overstep and data could not have been used. The only potential problem
would be if array happens to end on the very edge of last accesible page.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 69567687b0)
BLKINIT optimization worked on T4, but for some reason appears "too
aggressive" for T3 triggering intermiitent EC failures. It's not clear
why only EC is affected...
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 579734ced6)
The update: target in engines/ didn't recurse into engines/ccgost.
The update: and depend: targets in engines/ccgost needed a fixup.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 8b822d2566)
We had updates of certain header files in both Makefile.org and the
Makefile in the directory the header file lived in. This is error
prone and also sometimes generates slightly different results (usually
just a comment that differs) depending on which way the update was
done.
This removes the file update targets from the top level Makefile, adds
an update: target in all Makefiles and has it depend on the depend: or
local_depend: targets, whichever is appropriate, so we don't get a
double run through the whole file tree.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 0f539dc1a2)
Conflicts:
Makefile.org
apps/Makefile
test/Makefile
The certificate masks are used to select which ciphersuite we are going to
use. The variables |emask_k| and |emask_a| relate to export grade key
exchange and authentication respecitively. The variables |mask_k| and
|mask_a| are the equivalent versions for non-export grade. This fixes an
instance where the two usages of export/non-export were mixed up. In
practice it makes little difference since it still works!
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit fdfe8b06ae)
Remove support for the two export grade static DH ciphersuites. These two
ciphersuites were newly added (along with a number of other static DH
ciphersuites) to 1.0.2. However the two export ones have *never* worked
since they were introduced. It seems strange in any case to be adding new
export ciphersuites, and given "logjam" it also does not seem correct to
fix them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 13f8eb4730)
Conflicts:
CHANGES
If BN_rand is called with |bits| set to 1 and |top| set to 1 then a 1 byte
buffer overflow can occur. There are no such instances within the OpenSSL at
the moment.
Thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke, Filip Palian for
discovering and reporting this issue.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The functions BN_rshift and BN_lshift shift their arguments to the right or
left by a specified number of bits. Unpredicatable results (including
crashes) can occur if a negative number is supplied for the shift value.
Thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke and Filip Palian
for discovering and reporting this issue.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 7cc18d8158)
Conflicts:
crypto/bn/bn.h
crypto/bn/bn_err.c
If a client receives a bad hello request in DTLS then the alert is not
sent correctly.
RT#2801
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 4dc1aa0436)
40 bit ciphers are limited to 512 bit RSA, 56 bit ciphers to 1024 bit.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit ac38115c1a)
Also reorder preferences to prefer prime curves to binary curves, and P-256 to everything else.
The result:
$ openssl s_server -named_curves "auto"
This command will negotiate an ECDHE ciphersuite with P-256:
$ openssl s_client
This command will negotiate P-384:
$ openssl s_client -curves "P-384"
This command will not negotiate ECDHE because P-224 is disabled with "auto":
$ openssl s_client -curves "P-224"
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Since the client has no way of communicating her supported parameter
range to the server, connections to servers that choose weak DH will
simply fail.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
- Do not advise generation of DH parameters with dsaparam to save
computation time.
- Promote use of custom parameters more, and explicitly forbid use of
built-in parameters weaker than 2048 bits.
- Advise the callback to ignore <keylength> - it is currently called
with 1024 bits, but this value can and should be safely ignored by
servers.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The default bitlength is now 2048. Also clarify that either the number
of bits or the generator must be present:
$ openssl dhparam -2
and
$ openssl dhparam 2048
generate parameters but
$ openssl dhparam
does not.
Reviewed-by: Matt Caswell <matt@openssl.org>
The big "don't check for NULL" cleanup requires backporting some
of the lowest-level functions to actually do nothing if NULL is
given. This will make it easier to backport fixes to release
branches, where master assumes those lower-level functions are "safe"
This commit addresses those tickets: 3798 3799 3801.
Reviewed-by: Matt Caswell <matt@openssl.org>
The function obj_cmp() (file crypto/objects/obj_dat.c) can in some
situations call memcmp() with a null pointer and a zero length.
This is invalid behaviour. When compiling openssl with undefined
behaviour sanitizer (add -fsanitize=undefined to compile flags) this
can be seen. One example that triggers this behaviour is the pkcs7
command (but there are others, e.g. I've seen it with the timestamp
function):
apps/openssl pkcs7 -in test/testp7.pem
What happens is that obj_cmp takes objects of the type ASN1_OBJECT and
passes their ->data pointer to memcmp. Zero-sized ASN1_OBJECT
structures can have a null pointer as data.
RT#3816
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 2b8dc08b74)
Currently we set change_cipher_spec_ok to 1 before calling
ssl3_get_cert_verify(). This is because this message is optional and if it
is not sent then the next thing we would expect to get is the CCS. However,
although it is optional, we do actually know whether we should be receiving
one in advance. If we have received a client cert then we should expect
a CertificateVerify message. By the time we get to this point we will
already have bombed out if we didn't get a Certificate when we should have
done, so it is safe just to check whether |peer| is NULL or not. If it is
we won't get a CertificateVerify, otherwise we will. Therefore we should
change the logic so that we only attempt to get the CertificateVerify if
we are expecting one, and not allow a CCS in this scenario.
Whilst this is good practice for TLS it is even more important for DTLS.
In DTLS messages can be lost. Therefore we may be in a situation where a
CertificateVerify message does not arrive even though one was sent. In that
case the next message the server will receive will be the CCS. This could
also happen if messages get re-ordered in-flight. In DTLS if
|change_cipher_spec_ok| is not set and a CCS is received it is ignored.
However if |change_cipher_spec_ok| *is* set then a CCS arrival will
immediately move the server into the next epoch. Any messages arriving for
the previous epoch will be ignored. This means that, in this scenario, the
handshake can never complete. The client will attempt to retransmit
missing messages, but the server will ignore them because they are the wrong
epoch. The server meanwhile will still be waiting for the CertificateVerify
which is never going to arrive.
RT#2958
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit a0bd649336)
Matt's note: I added a call to X509V3err to Kurt's original patch.
RT#3840
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 344c271eb3)
If sk_SSL_CIPHER_new_null() returns NULL then ssl_bytes_to_cipher_list()
should also return NULL.
Based on an original patch by mrpre <mrpre@163.com>.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 14def5f537)
Ensure all fatal errors transition into the new error state for DTLS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit cefc93910c)
Conflicts:
ssl/d1_srvr.c
Ensure all fatal errors transition into the new error state on the client
side.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit cc273a9361)
Conflicts:
ssl/s3_clnt.c
Ensure all fatal errors transition into the new error state on the server
side.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit cf9b0b6fb2)
Conflicts:
ssl/s3_srvr.c
Reusing an SSL object when it has encountered a fatal error can
have bad consequences. This is a bug in application code not libssl
but libssl should be more forgiving and not crash.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit a89db885e0)
Conflicts:
ssl/s3_srvr.c
ssl/ssl_stat.c
Remove dependency on ssl_locl.h from v3_scts.c, and incidentally fix a build problem with
kerberos (the dependency meant v3_scts.c was trying to include krb5.h, but without having been
passed the relevanant -I flags to the compiler)
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit d13bd6130b)
Conflicts:
crypto/x509v3/v3_scts.c
RT2943 only complains about the incorrect check of -K argument size,
we might as well do the same thing with the -iv argument.
Before this, we only checked that the given argument wouldn't give a
bitstring larger than EVP_MAX_KEY_LENGTH. we can be more precise and
check against the size of the actual cipher used.
(cherry picked from commit 8920a7cd04)
Reviewed-by: Rich Salz <rsalz@openssl.org>
The problem occurs in EVP_PKEY_sign() when using RSA with X931 padding.
It is only triggered if the RSA key size is smaller than the digest length.
So with SHA512 you can trigger the overflow with anything less than an RSA
512 bit key. I managed to trigger a 62 byte overflow when using a 16 bit RSA
key. This wasn't sufficient to cause a crash, although your mileage may
vary.
In practice RSA keys of this length are never used and X931 padding is very
rare. Even if someone did use an excessively short RSA key, the chances of
them combining that with a longer digest and X931 padding is very
small. For these reasons I do not believe there is a security implication to
this. Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3
Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 34166d4189)
Add a sanity check to the print_bin function to ensure that the |off|
argument is positive. Thanks to Kevin Wojtysiak (Int3 Solutions) and
Paramjot Oberoi (Int3 Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 3deeeeb61b)
Sanity check the |len| parameter to ensure it is positive. Thanks to Kevin
Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3 Solutions) for
reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit cb0f400b0c)
The return value is checked for 0. This is currently safe but we should
really check for <= 0 since -1 is frequently used for error conditions.
Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3
Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit c427570e50)
Conflicts:
ssl/ssl_locl.h
For SSLv3 the code assumes that |header_length| > |md_block_size|. Whilst
this is true for all SSLv3 ciphersuites, this fact is far from obvious by
looking at the code. If this were not the case then an integer overflow
would occur, leading to a subsequent buffer overflow. Therefore I have
added an explicit sanity check to ensure header_length is always valid.
Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3
Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 29b0a15a48)
The static function dynamically allocates an output buffer if the output
grows larger than the static buffer that is normally used. The original
logic implied that |currlen| could be greater than |maxlen| which is
incorrect (and if so would cause a buffer overrun). Also the original
logic would call OPENSSL_malloc to create a dynamic buffer equal to the
size of the static buffer, and then immediately call OPENSSL_realloc to
make it bigger, rather than just creating a buffer than was big enough in
the first place. Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot
Oberoi (Int3 Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 9d9e37744c)
There was already a sanity check to ensure the passed buffer length is not
zero. Extend this to ensure that it also not negative. Thanks to Kevin
Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3 Solutions) for
reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit b86d7dca69)
The various implementations of EVP_CTRL_AEAD_TLS_AAD expect a buffer of at
least 13 bytes long. Add sanity checks to ensure that the length is at
least that. Also add a new constant (EVP_AEAD_TLS1_AAD_LEN) to evp.h to
represent this length. Thanks to Kevin Wojtysiak (Int3 Solutions) and
Paramjot Oberoi (Int3 Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit c826988109)
Conflicts:
ssl/record/ssl3_record.c
Add a sanity check to DES_enc_write to ensure the buffer length provided
is not negative. Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot
Oberoi (Int3 Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 873fb39f20)
Fortify flagged up a problem in n_do_ssl_write() in SSLv2. Analysing the
code I do not believe there is a real problem here. However the logic flows
are complicated enough that a sanity check of |len| is probably worthwhile.
Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3
Solutions) for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This reverts commit 47daa155a3.
The above commit was backported to the 1.0.2 branch as part of backporting
the alternative chain verify algorithm changes. However it has been pointed
out (credit to Shigeki Ohtsu) that this is unnecessary in 1.0.2 as this
commit is a work around for loop checking that only exists in master.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The function CRYPTO_strdup (aka OPENSSL_strdup) fails to check the return
value from CRYPTO_malloc to see if it is NULL before attempting to use it.
This patch adds a NULL check.
RT3786
Signed-off-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 37b0cf936744d9edb99b5dd82cae78a7eac6ad60)
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 20d21389c8b6f5b754573ffb6a4dc4f3986f2ca4)
EAP-FAST session resumption relies on handshake message lookahead
to determine server intentions. Commits
980bc1ec61
and
7b3ba508af
removed the lookahead so broke session resumption.
This change partially reverts the commits and brings the lookahead back
in reduced capacity for TLS + EAP-FAST only. Since EAP-FAST does not
support regular session tickets, the lookahead now only checks for a
Finished message.
Regular handshakes are unaffected by this change.
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 6e3d015363)
The logic with how 'ok' was calculated didn't quite convey what's "ok",
so the logic is slightly redone to make it less confusing.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 06affe3dac)
Filled in lots of return value checks that were missing the GOST engine, and
added appropriate error handling.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 8817e2e0c9)
Fix miscellaneous NULL pointer derefs in the sureware engine.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 7b611e5fe8)
This addresses
- request for improvement for faster key setup in RT#3576;
- clearing registers and stack in RT#3554 (this is more of a gesture to
see if there will be some traction from compiler side);
- more commentary around input parameters handling and stack layout
(desired when RT#3553 was reviewed);
- minor size and single block performance optimization (was lying around);
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 23f6eec71d)
Disable loop checking when we retry verification with an alternative path.
This fixes the case where an intermediate CA is explicitly trusted and part
of the untrusted certificate list. By disabling loop checking for this case
the untrusted CA can be replaced by the explicitly trusted case and
verification will succeed.
Signed-off-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit e5991ec528)
Reviewed-by: Rich Salz <rsalz@openssl.org>
X509_V_FLAG_NO_ALT_CHAINS flag. Using this option means that when building
certificate chains, the first chain found will be the one used. Without this
flag, if the first chain found is not trusted then we will keep looking to
see if we can build an alternative chain instead.
Conflicts:
apps/cms.c
apps/ocsp.c
apps/s_client.c
apps/s_server.c
apps/smime.c
apps/verify.c
Reviewed-by: Rich Salz <rsalz@openssl.org>
valid. However the issuer of the leaf, or some intermediate cert is in fact
in the trust store.
When building a trust chain if the first attempt fails, then try to see if
alternate chains could be constructed that are trusted.
RT3637
RT3621
Reviewed-by: Rich Salz <rsalz@openssl.org>
Fix bug where i2c_ASN1_INTEGER mishandles zero if it is marked as
negative.
Thanks to Huzaifa Sidhpurwala <huzaifas@redhat.com> and
Hanno Böck <hanno@hboeck.de> for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit a0eed48d37)
A 0-length ciphers list is never permitted. The old code only used to
reject an empty ciphers list for connections with a session ID. It
would later error out on a NULL structure, so this change just moves
the alert closer to the problem source.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 3ae91cfb32)
The disabled set of -Weverything is hard to maintain across versions.
Use -Wall -Wextra but also document other useful warnings that currently trigger.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If OpenSSL is configured with no-tlsext then ssl_get_prev_session can read
past the end of the ClientHello message if the session_id length in the
ClientHello is invalid. This should not cause any security issues since the
underlying buffer is 16k in size. It should never be possible to overrun by
that many bytes.
This is probably made redundant by the previous commit - but you can never be
too careful.
With thanks to Qinghao Tang for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 5e0a80c1c9)
The ClientHello processing is insufficiently rigorous in its checks to make
sure that we don't read past the end of the message. This does not have
security implications due to the size of the underlying buffer - but still
needs to be fixed.
With thanks to Qinghao Tang for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit c9642eb1ff79a30e2c7632ef8267cc34cc2b0d79)
It would set gen->d.dirn to a freed pointer in case X509V3_NAME_from_section
failed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 8ec5c5dd36)
While *pval is usually a pointer in rare circumstances it can be a long
value. One some platforms (e.g. WIN64) where
sizeof(long) < sizeof(ASN1_VALUE *) this will write past the field.
*pval is initialised correctly in the rest of ASN1_item_ex_new so setting it
to NULL is unecessary anyway.
Thanks to Julien Kauffmann for reporting this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit f617b4969a)
Conflicts:
crypto/asn1/tasn_new.c
Since source reformat, we ended up with some error reason string
definitions that spanned two lines. That in itself is fine, but we
sometimes edited them to provide better strings than what could be
automatically determined from the reason macro, for example:
{ERR_REASON(SSL_R_NO_GOST_CERTIFICATE_SENT_BY_PEER),
"Peer haven't sent GOST certificate, required for selected ciphersuite"},
However, mkerr.pl didn't treat those two-line definitions right, and
they ended up being retranslated to whatever the macro name would
indicate, for example:
{ERR_REASON(SSL_R_NO_GOST_CERTIFICATE_SENT_BY_PEER),
"No gost certificate sent by peer"},
Clearly not what we wanted. This change fixes this problem.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 2cfdfe0918)
The macros BSWAP4 and BSWAP8 have statetemnt expressions
implementations that use local variable names that shadow variables
outside the macro call, generating warnings like this
e_aes_cbc_hmac_sha1.c:263:14: warning: declaration shadows a local variable
[-Wshadow]
seqnum = BSWAP8(blocks[0].q[0]);
^
../modes/modes_lcl.h:41:29: note: expanded from macro 'BSWAP8'
^
e_aes_cbc_hmac_sha1.c:223:12: note: previous declaration is here
size_t ret = 0;
^
Have clang be quiet by modifying the macro variable names slightly
(suffixing them with an underscore).
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 2da2a4349c)
We use GNU statement expressions in crypto/md32_common.h, surrounded
by checks that GNU C is indeed used to compile. It seems that clang,
at least on Linux, pretends to be GNU C, therefore finds the statement
expressions and then warns about them.
The solution is to have clang be quiet about it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 04958e84d8)
ebcdic.c:284:7: warning: ISO C requires a translation unit to contain at least one
declaration [-Wempty-translation-unit]
^
1 warning generated.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit c25dea53e9)
There is no indication that the timing differences are exploitable in
OpenSSL, and indeed there is some indication (Usenix '14) that they
are too small to be exploitable. Nevertheless, be careful and apply
the same countermeasures as in s3_srvr.c
Thanks to Nimrod Aviram, Sebastian Schinzel and Yuval Shavitt for
reporting this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
ARM has optimized Cortex-A5x pipeline to favour pairs of complementary
AES instructions. While modified code improves performance of post-r0p0
Cortex-A53 performance by >40% (for CBC decrypt and CTR), it hurts
original r0p0. We favour later revisions, because one can't prevent
future from coming. Improvement on post-r0p0 Cortex-A57 exceeds 50%,
while new code is not slower on r0p0, or Apple A7 for that matter.
[Update even SHA results for latest Cortex-A53.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 94376cccb4)
RFC5915 requires the use of the I2OSP primitive as defined in RFC3447
for storing an EC Private Key. This converts the private key into an
OCTETSTRING and retains any leading zeros. This commit ensures that those
leading zeros are present if required.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 30cd4ff294)
Conflicts:
crypto/ec/ec_asn1.c
create an HMAC
Inspired by BoringSSL commit 2fe7f2d0d9a6fcc75b4e594eeec306cc55acd594
Reviewed-by: Richard Levitte <levitte@openssl.org>
Conflicts:
crypto/hmac/hmac.c
In ssl3_send_new_session_ticket the message to be sent is constructed. We
skip adding the length of the session ticket initially, then call
ssl_set_handshake_header, and finally go back and add in the length of the
ticket. Unfortunately, in DTLS, ssl_set_handshake_header also has the side
effect of buffering the message for subsequent retransmission if required.
By adding the ticket length after the call to ssl_set_handshake_header the
message that is buffered is incomplete, causing an invalid message to be
sent on retransmission.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 4f9fab6bd0)
Conflicts:
ssl/s3_srvr.c
In DTLS, immediately prior to epoch change, the write_sequence is supposed
to be stored in s->d1->last_write_sequence. The write_sequence is then reset
back to 00000000. In the event of retransmits of records from the previous
epoch, the last_write_sequence is restored. This commit fixes a bug in
DTLS1.2 where the write_sequence was being reset before last_write_sequence
was saved, and therefore retransmits are sent with incorrect sequence
numbers.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit d5d0a1cb13)
The certificate already contains the DH parameters in that case.
ssl3_send_server_key_exchange() would fail in that case anyway.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 93f1c13619)
If a set of certificates is supplied to OCSP_basic_verify use those in
addition to any present in the OCSP response as untrusted CAs when
verifying a certificate chain.
PR#3668
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 4ca5efc287)
Don't check that the curve appears in the list of acceptable curves for the
peer, if they didn't send us such a list (RFC 4492 does not require that the
extension be sent).
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit b79d24101e)
In cooperation with Ard Biesheuvel (Linaro) and Sami Tolvanen (Google).
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 2ecd32a1f8)
Fix builds config'd with no-ec and no-ec2m. Technically this combination is
redundant - but the fix is straight forward. Fix from OpenWrt.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Updated test/testssl script to include the new DTLS capability in ssltest.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 3c381e5423)
Fix some unsigned/signed warnings introduced as part of the fix
for CVE-2015-0293
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There were some discrepancies in the CHANGES file between the 1.0.1 version
and 1.0.2. This corrects it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove entries from CHANGES and NEWS from letter releases that occur *after*
the next point release. Without this we get duplicate entries for the same
issue appearing multiple times.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This assert is reachable for servers that support SSLv2 and export ciphers.
Therefore, such servers can be DoSed by sending a specially crafted
SSLv2 CLIENT-MASTER-KEY.
Also fix s2_srvr.c to error out early if the key lengths are malformed.
These lengths are sent unencrypted, so this does not introduce an oracle.
CVE-2015-0293
This issue was discovered by Sean Burford (Google) and Emilia Käsper of
the OpenSSL development team.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
In PKCS#7, the ASN.1 content component is optional.
This typically applies to inner content (detached signatures),
however we must also handle unexpected missing outer content
correctly.
This patch only addresses functions reachable from parsing,
decryption and verification, and functions otherwise associated
with reading potentially untrusted data.
Correcting all low-level API calls requires further work.
CVE-2015-0289
Thanks to Michal Zalewski (Google) for reporting this issue.
Reviewed-by: Steve Henson <steve@openssl.org>
Fix segmentation violation when ASN1_TYPE_cmp is passed a boolean type. This
can be triggered during certificate verification so could be a DoS attack
against a client or a server enabling client authentication.
CVE-2015-0286
Reviewed-by: Richard Levitte <levitte@openssl.org>
If client auth is used then a server can seg fault in the event of a DHE
cipher being used and a zero length ClientKeyExchange message being sent
by the client. This could be exploited in a DoS attack.
CVE-2015-1787
Reviewed-by: Richard Levitte <levitte@openssl.org>
If a client renegotiates using an invalid signature algorithms extension
it will crash a server with a NULL pointer dereference.
Thanks to David Ramos of Stanford University for reporting this bug.
CVE-2015-0291
Reviewed-by: Tim Hudson <tjh@openssl.org>
Conflicts:
ssl/t1_lib.c
Fix a bug where invalid PSS parameters are not rejected resulting in a
NULL pointer exception. This can be triggered during certificate
verification so could be a DoS attack against a client or a server
enabling client authentication.
Thanks to Brian Carpenter for reporting this issues.
CVE-2015-0208
Reviewed-by: Tim Hudson <tjh@openssl.org>
The DTLSv1_listen function is intended to be stateless and processes
the initial ClientHello from many peers. It is common for user code to
loop over the call to DTLSv1_listen until a valid ClientHello is received
with an associated cookie. A defect in the implementation of DTLSv1_listen
means that state is preserved in the SSL object from one invokation to the
next that can lead to a segmentation fault. Erorrs processing the initial
ClientHello can trigger this scenario. An example of such an error could
be that a DTLS1.0 only client is attempting to connect to a DTLS1.2 only
server.
CVE-2015-0207
Reviewed-by: Richard Levitte <levitte@openssl.org>
OpenSSL 1.0.2 introduced the "multiblock" performance improvement. This
feature only applies on 64 bit x86 architecture platforms that support AES
NI instructions. A defect in the implementation of "multiblock" can cause
OpenSSL's internal write buffer to become incorrectly set to NULL when
using non-blocking IO. Typically, when the user application is using a
socket BIO for writing, this will only result in a failed connection.
However if some other BIO is used then it is likely that a segmentation
fault will be triggered, thus enabling a potential DoS attack.
CVE-2015-0290
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Add support for ServerInfo SSL_CONF option and update documentation. This
was wrongly omitted from the 1.0.2 release.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Some miscellaneous removal of dead code from apps. Also fix an issue with
error handling with pkcs7.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 11abf92259)
Passing a negative value for the "-time" option to s_time results in a seg
fault. This commit fixes it so that time has to be greater than 0.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit dfef52f6f2)
The function tls1_PRF counts the number of digests in use and partitions
security evenly between them. There always needs to be at least one digest
in use, otherwise this is an internal error. Add a sanity check for this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 668f6f08c6)
The function sk_zero is supposed to zero the elements held within a stack.
It uses memset to do this. However it calculates the size of each element
as being sizeof(char **) instead of sizeof(char *). This probably doesn't
make much practical difference in most cases, but isn't a portable
assumption.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 7132ac830f)
Move memory allocation failure checks closer to the site of the malloc in
dgst app. Only a problem if the debug flag is set...but still should be
fixed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit be1477adc9)
Previously, ASN1_UTCTIME_cmp_time_t would return 1 if s > t, -1 if
s < t, and 0 if s == t.
This behavior was broken in a refactor [0], resulting in the opposite
time comparison behavior.
[0]: 904348a492
PR#3706
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit da27006df0)
Td4 and Te4 are arrays of u8. A u8 << int promotes the u8 to an int first then shifts.
If the mathematical result of a shift (as modelled by lhs * 2^{rhs}) is not representable
in an integer, behaviour is undefined. In other words, you can't shift into the sign bit
of a signed integer. Fix this by casting to u32 whenever we're shifting left by 24.
(For consistency, cast other shifts, too.)
Caught by -fsanitize=shift
Submitted by Nick Lewycky (Google)
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 8b37e5c14f)
When printing out an ASN.1 structure if the type is an item template don't
fall thru and attempt to interpret as a primitive type.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 5dc1247a74)
If SSL_check_chain is called with a NULL X509 object or a NULL EVP_PKEY
or the type of the public key is unrecognised then the local variable
|cpk| in tls1_check_chain does not get initialised. Subsequently an
attempt is made to deref it (after the "end" label), and a seg fault will
result.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit d813f9eb38)
The return value from ASN1_STRING_new() was not being checked which could
lead to a NULL deref in the event of a malloc failure. Also fixed a mem
leak in the error path.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 0c7ca4033d)
The return value from ASN1_STRING_new() was not being checked which could
lead to a NULL deref in the event of a malloc failure. Also fixed a mem
leak in the error path.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 6aa8dab2bb)
The call to asn1_do_adb can return NULL on error, so we should check the
return value before attempting to use it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 34a7ed0c39)
ASN1_primitive_new takes an ASN1_ITEM * param |it|. There are a couple
of conditional code paths that check whether |it| is NULL or not - but
later |it| is deref'd unconditionally. If |it| was ever really NULL then
this would seg fault. In practice ASN1_primitive_new is marked as an
internal function in the public header file. The only places it is ever
used internally always pass a non NULL parameter for |it|. Therefore, change
the code to sanity check that |it| is not NULL, and remove the conditional
checking.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 9e488fd6ab)
Calling EVP_DigestInit_ex which has already had the digest set up for it
should be possible. You are supposed to be able to pass NULL for the type.
However currently this seg faults.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit a01087027b)
In the event of an error |rr| could be NULL. Therefore don't assume you can
use |rr| in the error handling code.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 8c5a7b33c6)
Ensure all malloc failures return -1.
Reported by Adam Langley (Google).
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 06c6a2b4a3)
BIO_debug_callback() no longer assumes the hexadecimal representation of
a pointer fits in 8 characters.
Signed-off-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 460e920d8a)
Fix security issue where under certain conditions a client can complete a
handshake with an unseeded PRNG. The conditions are:
- Client is on a platform where the PRNG has not been seeded, and the
user has not seeded manually
- A protocol specific client method version has been used (i.e. not
SSL_client_methodv23)
- A ciphersuite is used that does not require additional random data
from the PRNG beyond the initial ClientHello client random
(e.g. PSK-RC4-SHA)
If the handshake succeeds then the client random that has been used will
have been generated from a PRNG with insufficient entropy and therefore
the output may be predictable.
For example using the following command with an unseeded openssl will
succeed on an unpatched platform:
openssl s_client -psk 1a2b3c4d -tls1_2 -cipher PSK-RC4-SHA
CVE-2015-0285
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit e1b568dd24)
Since commit 741c9959 ("DTLS revision."), we put the wrong protocol
version into our ClientHello for DTLS1_BAD_VER. The old DTLS
code which used ssl->version was replaced by the more generic SSL3 code
which uses ssl->client_version. The Cisco ASA no longer likes our
ClientHello.
RT#3711
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit f7683aaf36)
Commit 9cf0f187 in HEAD, and 68039af3 in 1.0.2, removed a version check
from dtls1_buffer_message() which was needed to distinguish between DTLS
1.x and Cisco's pre-standard version of DTLS (DTLS1_BAD_VER).
Based on an original patch by David Woodhouse <dwmw2@infradead.org>
RT#3703
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 5178a16c43)
New function ASN1_STRING_clear_free which cleanses an ASN1_STRING
structure before freeing it.
Call ASN1_STRING_clear_free on PKCS#8 private key components.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit a8ae0891d4)
This patch uses warning/fatal constants instead of numbers with comments for
warning/alerts in d1_pkt.c and s3_pkt.c
RT#3725
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit fd865cadcb)
Miscellaneous unchecked malloc fixes. Also fixed some mem leaks on error
paths as I spotted them along the way.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 918bb86529)
Conflicts:
crypto/bio/bss_dgram.c
The format script didn't correctly recognise some ASN.1 macros and
didn't reformat some files as a result. Fix script and reformat
affected files.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 437b14b533)
Some Cisco appliances use a pre-standard version number for DTLS. We support
this as DTLS1_BAD_VER within the code.
This change fixes d2i_SSL_SESSION for that DTLS version.
Based on an original patch by David Woodhouse <dwmw2@infradead.org>
RT#3704
Reviewed-by: Tim Hudson <tjh@openssl.org>
Conflicts:
ssl/ssl_asn1.c
Fixed various missing return value checks in ssl3_send_newsession_ticket.
Also a mem leak on error.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Conflicts:
ssl/s3_srvr.c
When OpenSSL is configured with no-ec, then the new evp_extra_test fails to
pass. This change adds appropriate OPENSSL_NO_EC guards around the code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit a988036259)
Updates to include SHA224, SHA256, SHA384 and SHA512. In particular note
the restriction on setting md to NULL with regards to thread safety.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit f7812493a0)
called evp_test.c, so I have called this one evp_extra_test.c
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Conflicts:
crypto/evp/Makefile
test/Makefile
The typo doesn't affect supported configuration, only unsupported masm.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 3372c4fffa)
The previous defaulting to TERMIOS took away -DTERMIOS / -DTERMIO a
bit too enthusiastically. Windows/DOSish platforms of all sorts get
identified as OPENSSL_SYS_MSDOS, and they get a different treatment
altogether UNLESS -DTERMIO or -DTERMIOS is explicitely given with the
configuration. The answer is to restore those macro definitions for
the affected configuration targets.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit ba4bdee718)
Conflicts:
Configure
The rationale for this move is that TERMIOS is default, supported by
POSIX-1.2001, and most definitely on Linux. For a few other systems,
TERMIO may still be the termnial interface of preference, so we keep
-DTERMIO on those in Configure.
crypto/ui/ui_openssl.c is simplified in this regard, and will define
TERMIOS for all systems except a select few exceptions.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 64e6bf64b3)
Conflicts:
Configure
crypto/ui/ui_openssl.c
Specifically, an ASN.1 NumericString in the certificate CN will fail UTF-8 conversion
and result in a negative return value, which the "x509 -checkhost" command-line option
incorrectly interpreted as success.
Also update X509_check_host docs to reflect reality.
Thanks to Sean Burford (Google) for reporting this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 0923e7df9e)
Free up bio_err after memory leak data has been printed to it.
In int_free_ex_data if ex_data is NULL there is nothing to free up
so return immediately and don't reallocate it.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 9c7a780bbe)
on affected platforms (PowerPC and AArch64).
For reference, minimalistic #ifdef GHASH is sufficient, because
it's never defined with OPENSSL_SMALL_FOOTPRINT and ctx->ghash
is never referred.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit b2991c081a)
Making a specific variable $failure_code and a bit of commenting in the
VMS section should help clear things up.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit e00ab250c8)
use read_ahead with DTLS because it doesn't work. Therefore read_ahead needs
to be the default.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit f400241251)
Per discussion: should not exit. Should not print to stderr.
Errors are ignored. Updated doc to reflect that, and the fact
that this function is to be avoided.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(cherry picked from commit abdd677125)
This should be a one off operation (subsequent invokation of the
script should not move them)
This commit is for the 1.0.2 changes
Reviewed-by: Tim Hudson <tjh@openssl.org>
Sometimes it fails to format them very well, and sometimes it corrupts them!
This commit moves some particularly problematic ones.
Conflicts:
crypto/bn/bn.h
crypto/ec/ec_lcl.h
crypto/rsa/rsa.h
demos/engines/ibmca/hw_ibmca.c
ssl/ssl.h
ssl/ssl3.h
Reviewed-by: Tim Hudson <tjh@openssl.org>
indent will not alter them when reformatting comments
(cherry picked from commit 1d97c84351)
Conflicts:
crypto/bn/bn_lcl.h
crypto/bn/bn_prime.c
crypto/engine/eng_all.c
crypto/rc4/rc4_utl.c
crypto/sha/sha.h
ssl/kssl.c
ssl/t1_lib.c
Reviewed-by: Tim Hudson <tjh@openssl.org>
Update the X509v3 name parsing to allow multiple xn-- international
domain name indicators in a name. Previously, only allowed one at
the beginning of a name, which was wrong.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(cherry picked from commit 31d1d3741f)
ssl3_setup_buffers or pqueue_insert fail. The former will fail if there is a
malloc failure, whilst the latter will fail if attempting to add a duplicate
record to the queue. This should never happen because duplicate records should
be detected and dropped before any attempt to add them to the queue.
Unfortunately records that arrive that are for the next epoch are not being
recorded correctly, and therefore replays are not being detected.
Additionally, these "should not happen" failures that can occur in
dtls1_buffer_record are not being treated as fatal and therefore an attacker
could exploit this by sending repeated replay records for the next epoch,
eventually causing a DoS through memory exhaustion.
Thanks to Chris Mueller for reporting this issue and providing initial
analysis and a patch. Further analysis and the final patch was performed by
Matt Caswell from the OpenSSL development team.
CVE-2015-0206
Reviewed-by: Dr Stephen Henson <steve@openssl.org>
(cherry picked from commit 652ff0f4796eecd8729b4690f2076d1c7ccb2862)
Fix to prevent use of DH client certificates without sending
certificate verify message.
If we've used a client certificate to generate the premaster secret
ssl3_get_client_key_exchange returns 2 and ssl3_get_cert_verify is
never called.
We can only skip the certificate verify message in
ssl3_get_cert_verify if the client didn't send a certificate.
Thanks to Karthikeyan Bhargavan for reporting this issue.
CVE-2015-0205
Reviewed-by: Matt Caswell <matt@openssl.org>
of the crash due to p being NULL. Steve's fix prevents this situation from
occuring - however this is by no means obvious by looking at the code for
dtls1_get_record. This fix just makes things look a bit more sane.
Reviewed-by: Dr Stephen Henson <steve@openssl.org>
Fix memory leak by freeing up saved_message.data if it is not NULL.
PR#3489
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 41cd41c441)
OpenSSL clients would tolerate temporary RSA keys in non-export
ciphersuites. It also had an option SSL_OP_EPHEMERAL_RSA which
enabled this server side. Remove both options as they are a
protocol violation.
Thanks to Karthikeyan Bhargavan for reporting this issue.
(CVE-2015-0204)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
This facilitates "universal" builds, ones that target multiple
architectures, e.g. ARMv5 through ARMv7. See commentary in
Configure for details.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit c1669e1c20)
Fix bug where an OpenSSL client would accept a handshake using an
ephemeral ECDH ciphersuites with the server key exchange message omitted.
Thanks to Karthikeyan Bhargavan for reporting this issue.
CVE-2014-3572
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit b15f876964)
By using non-DER or invalid encodings outside the signed portion of a
certificate the fingerprint can be changed without breaking the signature.
Although no details of the signed portion of the certificate can be changed
this can cause problems with some applications: e.g. those using the
certificate fingerprint for blacklists.
1. Reject signatures with non zero unused bits.
If the BIT STRING containing the signature has non zero unused bits reject
the signature. All current signature algorithms require zero unused bits.
2. Check certificate algorithm consistency.
Check the AlgorithmIdentifier inside TBS matches the one in the
certificate signature. NB: this will result in signature failure
errors for some broken certificates.
3. Check DSA/ECDSA signatures use DER.
Reencode DSA/ECDSA signatures and compare with the original received
signature. Return an error if there is a mismatch.
This will reject various cases including garbage after signature
(thanks to Antti Karjalainen and Tuomo Untinen from the Codenomicon CROSS
program for discovering this case) and use of BER or invalid ASN.1 INTEGERs
(negative or with leading zeroes).
CVE-2014-8275
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 684400ce19)
This change documents the world as-is, by turning all warnings on,
and then turning warnings that trigger off again.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Since SGC has been removed from OpenSSL 1.0.2 the
SSL3_FLAGS_SGC_RESTART_DONE is no longer used. However the #define is
retained for compatibility.
Reviewed-by: Matt Caswell <matt@openssl.org>
MS Server gated cryptography is obsolete and dates from the time of export
restrictions on strong encryption and is only used by ancient versions of
MSIE.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 63eab8a620)
When parsing ClientHello clear any existing extension state from
SRP login and SRTP profile.
Thanks to Karthikeyan Bhargavan for reporting this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 4f605ccb77)
Conflicts:
ssl/t1_lib.c
We need this for the freebsd kernel with glibc as used in the Debian kfreebsd
ports. There shouldn't be a problem defining this on systems not using glibc.
Reviewed-by: Richard Levitte <levitte@openssl.org>
* adds links to various related documents.
* fixes a few typos.
* rewords a few sentences.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 67472bd82b)
Return an error code for I/O errors instead of an assertion failure.
PR#3470
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 2521fcd852)
According to X6.90 null, object identifier, boolean, integer and enumerated
types can only have primitive encodings: return an error if any of
these are received with a constructed encoding.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Causes more problems than it fixes: even though error codes
are not part of the stable API, several users rely on the
specific error code, and the change breaks them. Conversely,
we don't have any concrete use-cases for constant-time behaviour here.
This reverts commit 738911cde6.
Reviewed-by: Andy Polyakov <appro@openssl.org>
From BoringSSL
- Send an alert when the client key exchange isn't correctly formatted.
- Reject overly short RSA ciphertexts to avoid a (benign) out-of-bounds memory access.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 4aecfd4d9f)
master branch has a specific regression test for a bug in x86_64-mont5 code,
see commit cdfe0fdde6.
This code is now in 1.0.2/1.0.1, so also backport the test.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The client_version needs to be preserved for the RSA key exchange.
This change also means that renegotiation will, like TLS, repeat the old
client_version rather than advertise only the final version. (Either way,
version change on renego is not allowed.) This is necessary in TLS to work
around an SChannel bug, but it's not strictly necessary in DTLS.
(From BoringSSL)
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit ec1af3c419)
The temporary variable causes unused variable warnings in opt mode with clang,
because the subsequent assert is compiled out.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Odd-length lists should be rejected everywhere upon parsing. Nevertheless,
be extra careful and add guards against off-by-one reads.
Also, drive-by replace inexplicable double-negation with an explicit comparison.
Reviewed-by: Matt Caswell <matt@openssl.org>
The Supported Elliptic Curves extension contains a vector of NamedCurves
of 2 bytes each, so the total length must be even. Accepting odd-length
lists was observed to lead to a non-exploitable one-byte out-of-bounds
read in the latest development branches (1.0.2 and master). Released
versions of OpenSSL are not affected.
Thanks to Felix Groebert of the Google Security Team for reporting this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 33d5ba8629)
and UDP header) when setting an mtu. This constant is not always correct (e.g.
if using IPv6). Use the new DTLS_CTRL functions instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 464ce92026)
we will support then dtls1_do_write can go into an infinite loop. This commit
fixes that.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit d3d9eef316)
at least the minimum or it will fail.
There were some instances in dtls1_query_mtu where the final mtu can end up
being less than the minimum, i.e. where the user has set an mtu manually. This
shouldn't be allowed. Also remove dtls1_guess_mtu that, despite having
logic for guessing an mtu, was actually only ever used to work out the minimum
mtu to use.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 1620a2e49c)
and instead use the value provided by the underlying BIO. Also provide some
new DTLS_CTRLs so that the library user can set the mtu without needing to
know this constant. These new DTLS_CTRLs provide the capability to set the
link level mtu to be used (i.e. including this IP/UDP overhead). The previous
DTLS_CTRLs required the library user to subtract this overhead first.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 59669b6abf)
Conflicts:
ssl/d1_both.c
used with no explanation. Some of this was introduced as part of RT#1929. The
value 28 is the length of the IP header (20 bytes) plus the UDP header (8
bytes). However use of this constant is incorrect because there may be
instances where a different value is needed, e.g. an IPv4 header is 20 bytes
but an IPv6 header is 40. Similarly you may not be using UDP (e.g. SCTP).
This commit introduces a new BIO_CTRL that provides the value to be used for
this mtu "overhead". It will be used by subsequent commits.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 0d3ae34df5)
mtu that we have received is not less than the minimum. If its less it uses the
minimum instead. The second call to query the mtu does not do that, but
instead uses whatever comes back. We have seen an instance in RT#3592 where we
have got an unreasonably small mtu come back. This commit makes both query
checks consistent.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 6abb0d1f8e)
automatically updated, and we should use the one provided instead.
Unfortunately there are a couple of locations where this is not respected.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 001235778a)
RT#3592 provides an instance where the OPENSSL_assert that this commit
replaces can be hit. I was able to recreate this issue by forcing the
underlying BIO to misbehave and come back with very small mtu values. This
happens the second time around the while loop after we have detected that the
MTU has been exceeded following the call to dtls1_write_bytes.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit cf75017bfd)
Previously, state variant was not advanced, which resulted in state
being stuck in the st1 variant (usually "_A").
This broke certificate callback retry logic when accepting connections
that were using SSLv2 ClientHello (hence reusing the message), because
their state never advanced to SSL3_ST_SR_CLNT_HELLO_C variant required
for the retry code path.
Reported by Yichun Zhang (agentzh).
Signed-off-by: Piotr Sikora <piotr@cloudflare.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The current documentation contains a bunch of spelling and grammar mistakes. I also
found it hard to understand some paragraphs, so here is my attempt to improve its
readability.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 03b637a730)
Workaround for NetWare CodeWarrior compiler which doesn't properly lookup
includes when in same directory as the C file which includes it.
PR#3569
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 333fad9f2d)
When using the -xcert option to test certificate validity print out
if we pass Suite B compliance. We print out "not tested" if we aren't
in Suite B mode.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 7d4cdededc)
the session's version (server).
See also BoringSSL's commit bdf5e72f50e25f0e45e825c156168766d8442dde.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit 9e189b9dc1)
ECDH_compute_key is silently ignored and the KDF is run on duff data
Thanks to github user tomykaira for the suggested fix.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit 8d02bebddf)
once the ChangeCipherSpec message is received. Previously, the server would
set the flag once at SSL3_ST_SR_CERT_VRFY and again at SSL3_ST_SR_FINISHED.
This would allow a second CCS to arrive and would corrupt the server state.
(Because the first CCS would latch the correct keys and subsequent CCS
messages would have to be encrypted, a MitM attacker cannot exploit this,
though.)
Thanks to Joeri de Ruiter for reporting this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit e94a6c0ede)
The server must send a NewSessionTicket message if it advertised one
in the ServerHello, so make a missing ticket message an alert
in the client.
An equivalent change was independently made in BoringSSL, see commit
6444287806d801b9a45baf1f6f02a0e3a16e144c.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit de2c7504eb)
The client sends a session ID with the session ticket, and uses
the returned ID to detect resumption, so we do not need to peek
at handshake messages: s->hit tells us explicitly if we're resuming.
An equivalent change was independently made in BoringSSL, see commit
407886f589cf2dbaed82db0a44173036c3bc3317.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 980bc1ec61)
Conflicts:
ssl/s3_clnt.c
The same change was independently made in BoringSSL, see commit
9eaeef81fa2d4fd6246dc02b6203fa936a5eaf67
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 7b3ba508af)
This ensures that it's zeroed even if the SSL object is reused
(as in ssltest.c). It also ensures that it applies to DTLS, too.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit a06cd5d056)
When no-ssl3 is set only make SSLv3 disabled by default. Retain -ssl3
options for s_client/s_server/ssltest.
When no-ssl3-method is set SSLv3_*method() is removed and all -ssl3
options.
We should document this somewhere, e.g. wiki, FAQ or manual page.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 3881d8106d)
If no keyfile has been specified use the certificate file instead.
Fix typo: we need to check the chain is not NULL, not the chain file.
Reviewed-by: Matt Caswell <matt@openssl.org>
The supported signature algorithms extension needs to be processed before
the certificate to use is decided and before a cipher is selected (as the
set of shared signature algorithms supported may impact the choice).
Reviewed-by: Matt Caswell <matt@openssl.org>
Don't attempt to access msg structure if recvmsg returns an error.
PR#3483
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 012aa9ec76)
If the hash or public key algorithm is "undef" the signature type
will receive special handling and shouldn't be included in the
cross reference table.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 55f7fb8848)
Out is the buffer which needs to contain at least inl + cipher_block_size - 1 bytes. Outl
is just an int*.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 5211e094de)
This doesn't really fix the datarace but changes it so it can only happens
once. This isn't really a problem since we always just set it to the same
value. We now just stop writing it after the first time.
PR3584, https://bugs.debian.org/534534
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
see RT #3203
Future versions of OpenSSL use the canonical terms "ECDHE" and "DHE"
as configuration strings and compilation constants. This patch
introduces aliases so that the stable 1.0.2 branch can be
forward-compatible with code and configuration scripts that use the
normalized terms, while avoiding changing any library output for
stable users.
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
Tighten client-side session ticket handling during renegotiation:
ensure that the client only accepts a session ticket if the server sends
the extension anew in the ServerHello. Previously, a TLS client would
reuse the old extension state and thus accept a session ticket if one was
announced in the initial ServerHello.
Reviewed-by: Bodo Moeller <bodo@openssl.org>
(cherry picked from commit d663df2399)
SSL_set_SSL_CTX is used to change the SSL_CTX for SNI, keep the
supported signature algorithms and raw cipherlist.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 14e14bf696)
Since SNI will typically switch the SSL_CTX structure to the one
corresponding to the appopriate server we need to parse custom
extensions using the switched SSL_CTX not the original one. This
is done by parsing custom extensions *after* SNI.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
When we're configured with no-ssl3 and we receive an SSL v3 Client Hello, we set
the method to NULL. We didn't used to do that, and it breaks things. This is a
regression introduced in 62f45cc27d. Keep the old
method since the code is not able to deal with a NULL method at this time.
CVE-2014-3569, PR#3571
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 392fa7a952)
Related to CVE-2014-3513
This fix was developed by the OpenSSL Team
Reviewed-by: Tim Hudson <tjh@openssl.org>
Conflicts:
util/mkdef.pl
util/ssleay.num
Conflicts:
util/mkdef.pl
CVE-2014-3513
This issue was reported to OpenSSL on 26th September 2014, based on an original
issue and patch developed by the LibreSSL project. Further analysis of the issue
was performed by the OpenSSL team.
The fix was developed by the OpenSSL team.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Patch supplied by Matthieu Patou <mat@matws.net>, and modified to also
remove duplicate definition of PKCS7_type_is_digest.
PR#3551
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit e0fdea3e49)
If data is NULL, return the size needed to hold the
derived key. No other API to do this, so document
the behavior.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 5aed169305)
Reencode DigestInto in DER and check against the original: this
will reject any improperly encoded DigestInfo structures.
Note: this is a precautionary measure, there is no known attack
which can exploit this.
Thanks to Brian Smith for reporting this issue.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Do the final padding check in EVP_DecryptFinal_ex in constant time to
avoid a timing leak from padding failure.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 4aac102f75)
Conflicts:
crypto/evp/evp_enc.c
(Original commit adb46dbc6d)
Use the new constant-time methods consistently in s3_srvr.c
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 455b65dfab)
that bad encryptions are treated like random session keys in constant
time.
(cherry picked from commit adb46dbc6d)
Reviewed-by: Rich Salz <rsalz@openssl.org>
Also tweak s3_cbc.c to use new constant-time methods.
Also fix memory leaks from internal errors in RSA_padding_check_PKCS1_OAEP_mgf1
This patch is based on the original RT submission by Adam Langley <agl@chromium.org>,
as well as code from BoringSSL and OpenSSL.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Conflicts:
crypto/rsa/rsa_oaep.c
crypto/rsa/rsa_pk1.c
ssl/s3_cbc.c
i2d_re_X509_tbs re-encodes the TBS portion of the certificate.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Dr Stephen Henson <steve@openssl.org>
(cherry picked from commit 95b1752cc7)
that fixed PR#3450 where an existing cast masked an issue when i was changed
from int to long in that commit
Picked up on z/linux (s390) where sizeof(int)!=sizeof(long)
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit b5ff559ff9)
GetDIBits has been around since Windows2000 and
BitBitmapBits is an old Win16 compatibility function
that is much slower.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 99b00fd993)
Move the readdir() lines out of the if statement, so
that flist is available globally.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 6f46c3c3b0)
If we don't find a signer in the internal list, then fall
through and look at the internal list; don't just return NULL.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit b2aa38a980)
Say where to email bug reports.
Mention general RT tracker info in a separate paragraph.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 468ab1c20d)
This is funny; Ben commented in the source, Matt opend a ticket,
and Rich is doing the submit. Need more code-review? :)
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit eb63bce040)
When calling X509_set_version to set v1 certificate, that
should mean that the version number field is omitted.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit 1f18f50c4b)
This is a more comprehensive fix. It changes all
keygen apps to use 2K keys. It also changes the
default to use SHA256 not SHA1. This is from
Kurt's upstream Debian changes.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 44e0c2bae4)
In addition to Matthias's change, I also added -n to
not remove links. And updated the manpage.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit a787c2590e)
The documentation is wrong about what happens when the
session cache fills up.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit e9edfc4196)
pod2man now complains when item tags are not sequential.
Also complains about missing =back and other tags.
Silence the warnings; most were already done.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit fe7573042f)
Fix a bug in handling of 128 byte long PSK identity in
psk_client_callback.
OpenSSL supports PSK identities of up to (and including) 128 bytes in
length. PSK identity is obtained via the psk_client_callback,
implementors of which are expected to provide a NULL-terminated
identity. However, the callback is invoked with only 128 bytes of
storage thus making it impossible to return a 128 byte long identity and
the required additional NULL byte.
This CL fixes the issue by passing in a 129 byte long buffer into the
psk_client_callback. As a safety precaution, this CL also zeroes out the
buffer before passing it into the callback, uses strnlen for obtaining
the length of the identity returned by the callback, and aborts the
handshake if the identity (without the NULL terminator) is longer than
128 bytes.
(Original patch amended to achieve strnlen in a different way.)
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit be0d851732)
Can't really happen, but the flow of control isn't obvious.
Add an initializer.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 0ff3687eab)
"inline" without static is not correct as the compiler may choose to ignore it
and will then either emit an external definition, or expect one.
Reviewed-by: Geoff Thorpe <geoff@openssl.org>
(cherry picked from commit 86f50b36e6)
RT842, closed back in 2004, changed the default serial number
to be a random number rather than zero. Finally time to update
the doc
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 3aba132d61)
Add .crt/.cer/.crl to the filenames parsed.
I also updated the podpage (since it didn't exist when
this ticket was first created, nor when it was re-created
seven years later).
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 80ec8d4e3e)
Re-order algorithm list.
Be consistent in command synopsis.
Add content about signing.
Add EXAMPLE section
Add some missing options: -r, -fips-fingerprint -non-fips-allow
Various other fixes.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Add the file written by James Westby, graciously contributed
under the terms of the OpenSSL license.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit cf2239b3b3)
The doc says that port can be "*" to mean any port.
That's wrong.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit 07e3b31fae)
Add Darwin to list of case-insensitive filenames when
installing manapges. When doing this, I noticed that
we weren't setting "filecase" for the HTML doc install.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit 82d9185ae5)
Fix comments in ssltest.c: return value of 0 now means extension is
omitted and add_cb is not called for servers if the corresponding
extension is absent in ClientHello.
Test add_cb is not called if extension is not received.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit f47e203975)
Instead of SSL_CTX_set_custom_cli_ext and SSL_CTX_set_custom_srv_ext
use SSL_CTX_add_client_custom_ext and SSL_CTX_add_server_custom_ext.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 8cafe9e8bf)
Support separate parse and add callback arguments.
Add new callback so an application can free extension data.
Change return value for send functions so < 0 is an error 0
omits extension and > 0 includes it. This is more consistent
with the behaviour of other functions in OpenSSL.
Modify parse_cb handling so <= 0 is an error.
Make SSL_CTX_set_custom_cli_ext and SSL_CTX_set_custom_cli_ext argument
order consistent.
NOTE: these changes WILL break existing code.
Remove (now inaccurate) in line documentation.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 33f653adf3)
Use "parse" and "add" for function and callback names instead of
"first" and "second".
Change arguments to callback so the extension type is unsigned int
and the buffer length is size_t. Note: this *will* break existing code.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit de2a9e38f3)
Since sanity checks are performed for all custom extensions the
serverinfo checks are no longer needed.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 707b026d78)
Conflicts:
ssl/ssl3.h
ssl/t1_lib.c
Reject attempts to use extensions handled internally.
Add flags to each extension structure to indicate if an extension
has been sent or received. Enforce RFC5246 compliance by rejecting
duplicate extensions and unsolicited extensions and only send a
server extension if we have sent the corresponding client extension.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 28ea0a0c6a)
Use the same structure for client and server custom extensions.
Add utility functions in new file t1_ext.c.
Use new utility functions to handle custom server and client extensions
and remove a lot of code duplication.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit ecf4d66090)
Conflicts:
ssl/ssl_lib.c
ssl/ssl_locl.h
ssl/t1_lib.c
Move custom extension structures from SSL_CTX to CERT structure.
This change means the form can be revised in future without binary
compatibility issues. Also since CERT is part of SSL structures
so per-SSL custom extensions could be supported in future as well as
per SSL_CTX.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit b83294fe30)
Conflicts:
ssl/ssl.h
ssl/ssl_cert.c
ssl/ssl_locl.h
Pull constant-time methods out to a separate header, add tests.
Reviewed-by: Bodo Moeller <bodo@openssl.org>
(cherry picked from commit 5a3d21c058)
Conflicts:
ssl/s3_cbc.c
test/Makefile
Add the wrapper to all public header files (Configure
generates one). Don't bother for those that are just
lists of #define's that do renaming.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Cherry-pick of commit 17e80c6bd0
The old code implicitly relies on the ASN.1 code returning a \0-prefixed buffer
when the buffer length is 0. Change this to verify explicitly that the ASN.1 string
has positive length.
Reviewed-by: Dr Stephen Henson <steve@openssl.org>
(cherry picked from commit 82dc08de54ce443c2a9ac478faffe79e76157795)
When d2i_ECPrivateKey reads a private key with a missing (optional) public key,
generate one automatically from the group and private key.
Reviewed-by: Dr Stephen Henson <steve@openssl.org>
(cherry picked from commit ed383f847156940e93f256fed78599873a4a9b28)
This change saves several EC routines from crashing when an EC_KEY is
missing a public key. The public key is optional in the EC private key
format and, without this patch, running the following through `openssl
ec` causes a crash:
-----BEGIN EC PRIVATE KEY-----
MBkCAQEECAECAwQFBgcIoAoGCCqGSM49AwEH
-----END EC PRIVATE KEY-----
Reviewed-by: Dr Stephen Henson <steve@openssl.org>
(cherry picked from commit b391570bdeb386d4fd325917c248d593d3c43930)
I also removed some trailing whitespace and cleaned
up the "see also" list.
Reviewed-by: Emilia Kasper <emilia@openssl.org>
(cherry picked from commit 7b3e11c544)
Extra SSL_get_selected_srtp_profile() declaration in ssl/srtp.h
causes -Werror builds to fail.
Cherry-picked from 3609b02305
Reviewed-by: Tim Hudson <tjh@openssl.org>
The description of when the server creates a DH key is
confusing. This cleans it up.
(rsalz: also removed trailing whitespace.)
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The EXAMPLE that used FILE and RC2 doesn't compile due to a
few minor errors. Tweak to use IDEA and AES-128. Remove
examples about RC2 and RC5.
Reviewed-by: Emilia Kasper <emilia@openssl.org>
Limit the number of empty records that will be processed consecutively
in order to prevent ssl3_get_record from never returning.
Reported by "oftc_must_be_destroyed" and George Kadianakis.
Reviewed-by: Bodo Moeller <bodo@openssl.org>
Clarify the intended use of EVP_PKEY_sign. Make the code example compile.
Reviewed-by: Dr Stephen Henson <steve@openssl.org>
(cherry picked from commit d64c533a20)
The addition of SRP authentication needs to be checked in various places
to work properly. Specifically:
A certificate is not sent.
A certificate request must not be sent.
Server key exchange message must not contain a signature.
If appropriate SRP authentication ciphersuites should be chosen.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 8f5a8805b82d1ae81168b11b7f1506db9e047dec)
Invalid parameters passed to the SRP code can be overrun an internal
buffer. Add sanity check that g, A, B < N to SRP code.
Thanks to Sean Devlin and Watson Ladd of Cryptography Services, NCC
Group for reporting this issue.
If a client attempted to use an SRP ciphersuite and it had not been
set up correctly it would crash with a null pointer read. A malicious
server could exploit this in a DoS attack.
Thanks to Joonas Kuorilehto and Riku Hietamäki from Codenomicon
for reporting this issue.
CVE-2014-2970
Reviewed-by: Tim Hudson <tjh@openssl.org>
- Upon parsing, reject OIDs with invalid base-128 encoding.
- Always NUL-terminate the destination buffer in OBJ_obj2txt printing function.
CVE-2014-3508
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
In a couple of functions, a sequence number would be calculated twice.
Additionally, in |dtls1_process_out_of_seq_message|, we know that
|frag_len| <= |msg_hdr->msg_len| so the later tests for |frag_len <
msg_hdr->msg_len| can be more clearly written as |frag_len !=
msg_hdr->msg_len|, since that's the only remaining case.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Previously, a truncated DTLS fragment in
|dtls1_process_out_of_seq_message| would cause *ok to be cleared, but
the return value would still be the number of bytes read. This would
cause |dtls1_get_message| not to consider it an error and it would
continue processing as normal until the calling function noticed that
*ok was zero.
I can't see an exploit here because |dtls1_get_message| uses
|s->init_num| as the length, which will always be zero from what I can
see.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The |pqueue_insert| function can fail if one attempts to insert a
duplicate sequence number. When handling a fragment of an out of
sequence message, |dtls1_process_out_of_seq_message| would not call
|dtls1_reassemble_fragment| if the fragment's length was zero. It would
then allocate a fresh fragment and attempt to insert it, but ignore the
return value, leaking the fragment.
This allows an attacker to exhaust the memory of a DTLS peer.
Fixes CVE-2014-3507
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
In |dtls1_reassemble_fragment|, the value of
|msg_hdr->frag_off+frag_len| was being checked against the maximum
handshake message size, but then |msg_len| bytes were allocated for the
fragment buffer. This means that so long as the fragment was within the
allowed size, the pending handshake message could consume 16MB + 2MB
(for the reassembly bitmap). Approx 10 outstanding handshake messages
are allowed, meaning that an attacker could consume ~180MB per DTLS
connection.
In the non-fragmented path (in |dtls1_process_out_of_seq_message|), no
check was applied.
Fixes CVE-2014-3506
Wholly based on patch by Adam Langley with one minor amendment.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The |item| variable, in both of these cases, may contain a pointer to a
|pitem| structure within |s->d1->buffered_messages|. It was being freed
in the error case while still being in |buffered_messages|. When the
error later caused the |SSL*| to be destroyed, the item would be double
freed.
Thanks to Wah-Teh Chang for spotting that the fix in 1632ef74 was
inconsistent with the other error paths (but correct).
Fixes CVE-2014-3505
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
We can't rename ssleay_rand_bytes to md_rand_bytes_lock as this will cause
an error code discrepancy. Instead keep ssleay_rand_bytes and add an
extra parameter: since ssleay_rand_bytes is not part of the public API
this wont cause any binary compatibility issues.
Reviewed-by: Kurt Roeckx <kurt@openssl.org >
Don't call internal functions directly call them through
SSL_test_functions(). This also makes unit testing work on
Windows and platforms that don't export internal functions
from shared libraries.
By default unit testing is not enabled: it requires the compile
time option "enable-unit-test".
Reviewed-by: Geoff Thorpe <geoff@openssl.org>
(cherry picked from commit e0fc7961c4)
Conflicts:
ssl/heartbeat_test.c
ssl/ssl.h
util/mkdef.pl
The options which emulate a web server don't make sense when doing DTLS.
Exit with an error if an attempt is made to use them.
PR#3453
(cherry picked from commit 58a2aaeade8bdecd0f9f0df41927f7cff3012547)
Add description of the option to advertise support of
Next Protocol Negotiation extension (-nextprotoneg) to
man pages of s_client and s_server.
PR#3444
(cherry picked from commit 7efd0e777e)
This is actually ok for this function, but initialised to zero anyway if
PURIFY defined.
This does have the impact of masking any *real* unitialised data reads in bn though.
Patch based on approach suggested by Rich Salz.
PR#3415
(cherry picked from commit 77747e2d9a5573b1dbc15e247ce18c03374c760c)
Reduces number of silly casts in OpenSSL code and likely most
applications. Consistent with (char *) for "peername" value from
X509_check_host() and X509_VERIFY_PARAM_get0_peername().
(cherry picked from commit 297c67fcd8)
ERR_get_error(3) references the non-existent
ERR_get_last_error_line_data instead of the one that does exist,
ERR_peek_last_error_line_data.
PR#3283
(cherry picked from commit 5cc99c6cf5)
Internal pointers in CCM, GCM and XTS contexts should either be
NULL or set to point to the appropriate key schedule. This needs
to be adjusted when copying contexts.
(cherry picked from commit c2fd5d79ff)
We can't unfortunately print the CMAC cipher used without extending the API.
PR#2579
(cherry picked from commit 79e31a2842e10271581cbfdaae0145dd4bd35107)
IN parameter.
Under the old docs, the only thing stated was "at most
EVP_PKEY_size(pkey) bytes will be written". It was kind of misleading
since it appears EVP_PKEY_size(pkey) WILL be written regardless of the
signature's buffer size.
(cherry picked from commit 6e6ba36d98)
If CSR verify fails in ca utility print out error messages.
Otherwise some errors give misleading output: for example
if the key size exceeds the library limit.
PR#2875
(cherry picked from commit a30bdb55d1)
Update protocols supported and note that SSLv2 is effectively disabled
by default.
PR#3184
(cherry picked from commit 1b13a4f38dfc385d5e776f6b3e06c5795874cf9b)
In EVP_PBE_alg_add don't use the underlying NID for the cipher
as it may have a non-standard key size.
PR#3206
(cherry picked from commit efb7caef637a1de8468ca109efd355a9d0e73a45)
Document that the certificate passed to SSL_CTX_add_extra_chain_cert()
should not be freed by the application.
PR#3409
(cherry picked from commit 0535c2d67c)
This ensures high performance is situations when assembler supports
AVX2, but not AD*X.
(cherry picked from commit f3f620e1e0)
Resolved conflicts:
crypto/bn/asm/rsaz-avx2.pl
In the ssl_cipher_get_evp() function, fix off-by-one errors in index validation before accessing arrays.
Bug discovered and fixed by Miod Vallat from the OpenBSD team.
PR#3375
Allow CCS after finished has been sent by client: at this point
keys have been correctly set up so it is OK to accept CCS from
server. Without this renegotiation can sometimes fail.
PR#3400
(cherry picked from commit 99cd6a91fcb0931feaebbb4832681d40a66fad41)
compiler supports it. Otherwise, there are warnings about it lacking
everywhere, which is quite tedious to read through while trying to check
for other warnings.
A client reference identity of ".example.com" matches a server
certificate presented identity that is any sub-domain of "example.com"
(e.g. "www.sub.example.com).
With the X509_CHECK_FLAG_SINGLE_LABEL_SUBDOMAINS flag, it matches
only direct child sub-domains (e.g. "www.sub.example.com").
(cherry picked from commit e52c52f10bb8e34aaf8f28f3e5b56939e8f6b357)
armcap.c is shared between 32- and 64-bit builds and features link-time
detection of getauxval.
Submitted by: Ard Biesheuvel.
(cherry picked from commit e8d93e342b)
Backport of patch:
add ECC strings to ciphers(1), point out difference between DH and ECDH
and backport of other other assorted fixes to this man page
* Make a clear distinction between DH and ECDH key exchange.
* Group all key exchange cipher suite identifiers, first DH then ECDH
* add descriptions for all supported *DH* identifiers
* add ECDSA authentication descriptions
* add example showing how to disable all suites that offer no
authentication or encryption
* update status of static DH (it's now supported)
* backport descriptions of AES128, AES256, AESGCM
* backport descriptions of CAMELLIA128, CAMELLIA256
* backport listing of standard names for ECC cipher suites
and TLSv1.2 cipher suites
* backport description of PSK cipher suites
Defines SETUP_TEST_FIXTURE and EXECUTE_TEST, and updates ssl/heartbeat_test.c
using these macros. SETUP_TEST_FIXTURE makes use of the new TEST_CASE_NAME
macro, defined to use __func__ or __FUNCTION__ on platforms that support those
symbols, or to use the file name and line number otherwise. This should fix
several reported build problems related to lack of C99 support.
SRP ciphersuites do not have no authentication. They have authentication
based on SRP. Add new SRP authentication flag and cipher string.
(cherry picked from commit a86b88acc373ac1fb0ca709a5fb8a8fa74683f67)
Because of a missing include <fcntl.h> we don't have O_CREATE and don't create
the file with open() using mode 0600 but fall back to using fopen() with the
default umask followed by a chmod().
Problem found by Jakub Wilk <jwilk@debian.org>.
If application uses tls_session_secret_cb for session resumption
set the CCS_OK flag.
(cherry picked from commit 953c592572e8811b7956cc09fbd8e98037068b58)
A buffer overrun attack can be triggered by sending invalid DTLS fragments
to an OpenSSL DTLS client or server. This is potentially exploitable to
run arbitrary code on a vulnerable client or server.
Fixed by adding consistency check for DTLS fragments.
Thanks to Jüri Aedla for reporting this issue.
(cherry picked from commit 1632ef7448)
Only accept change cipher spec when it is expected instead of at any
time. This prevents premature setting of session keys before the master
secret is determined which an attacker could use as a MITM attack.
Thanks to KIKUCHI Masashi (Lepidum Co. Ltd.) for reporting this issue
and providing the initial fix this patch is based on.
(cherry picked from commit bc8923b1ec)
Unnecessary recursion when receiving a DTLS hello request can be used to
crash a DTLS client. Fixed by handling DTLS hello request without recursion.
Thanks to Imre Rad (Search-Lab Ltd.) for discovering this issue.
(cherry picked from commit d3152655d5)
Add certificates if -nocerts and -certfile specified when signing
in smime application. This can be used this to specify the
order certificates appear in the PKCS#7 structure: some broken
applications require a certain ordering.
PR#3316
(cherry picked from commit e114abee9ec084a56c1d6076ac6de8a7a3a5cf34)
Add TLS padding extension to SSL_OP_ALL so it is used with other
"bugs" options and can be turned off.
This replaces SSL_OP_SSLREF2_REUSE_CERT_TYPE_BUG which is an ancient
option referring to SSLv2 and SSLREF.
PR#3336
(cherry picked from commit 758415b2259fa45d3fe17d8e53ae1341b7b6e482)
Conflicts:
ssl/t1_lib.c
Fixes to host checking wild card support and add support for
setting host checking flags when verifying a certificate
chain.
(cherry picked from commit 397a8e747d)
Replace manual ASN.1 decoder with ASN1_get object. This
will decode the tag and length properly and check against
it does not exceed the supplied buffer length.
PR#3335
(cherry picked from commit b0308dddd1cc6a8e1de803ef29ba6da25ee072c2)
If the key type does not match any CMS recipient type return
an error instead of using a random key (MMA mitigation). This
does not leak any useful information to an attacker.
PR#3348
(cherry picked from commit bd43b4cf778a53ffa5d77510ecd408a009dc00d2)
Even though the meat of dso_vms.c is compiled out on non-VMS builds,
the (pre-)compiler still traverses some of the macro handling. This
trips up at least one non-VMS build configuration, so this commit
makes the skip-VMS case more robust.
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
This patch resolves RT ticket #2608.
Thanks to Robert Dugal for originally spotting this, and to David
Ramos for noticing that the ball had been dropped.
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
The lazy-initialisation of BN_MONT_CTX was serialising all threads, as
noted by Daniel Sands and co at Sandia. This was to handle the case that
2 or more threads race to lazy-init the same context, but stunted all
scalability in the case where 2 or more threads are doing unrelated
things! We favour the latter case by punishing the former. The init work
gets done by each thread that finds the context to be uninitialised, and
we then lock the "set" logic after that work is done - the winning
thread's work gets used, the losing threads throw away what they've done.
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Newer pod2man considers =item [1-9] part of a numbered list, while =item
0 starts an unnumbered list. Add a zero effect formatting mark to override
this.
doc/apps/smime.pod around line 315: Expected text after =item, not a
number
...
PR#3146
It's not clear whether this inconsistency could lead to an actual
computation error, but it involved a BIGNUM being passed around the
montgomery logic in an inconsistent state. This was found using flags
-DBN_DEBUG -DBN_DEBUG_RAND, and working backwards from this assertion
in 'ectest';
ectest: bn_mul.c:960: BN_mul: Assertion `(_bnum2->top == 0) ||
(_bnum2->d[_bnum2->top - 1] != 0)' failed
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
(cherry picked from commit a529261891)
Gets rid of this;
defined(@array) is deprecated at ../util/mkerr.pl line 792.
(Maybe you should just omit the defined()?)
defined(@array) is deprecated at ../util/mkerr.pl line 800.
(Maybe you should just omit the defined()?)
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
(cherry picked from commit 647f360e2e)
When looking for an extension we need to set the last found
position to -1 to properly search all extensions.
PR#3309.
(cherry picked from commit 300b9f0b70)
Treat a zero length passed to ssleay_rand_add a no op: the existing logic
zeroes the md value which is very bad. OpenSSL itself never does this
internally and the actual call doesn't make sense as it would be passing
zero bytes of entropy.
Thanks to Marcus Meissner <meissner@suse.de> for reporting this bug.
(cherry picked from commit 5be1ae28ef)
A missing bounds check in the handling of the TLS heartbeat extension
can be used to reveal up to 64k of memory to a connected client or
server.
Thanks for Neel Mehta of Google Security for discovering this bug and to
Adam Langley <agl@chromium.org> and Bodo Moeller <bmoeller@acm.org> for
preparing the fix (CVE-2014-0160)
(cherry picked from commit 96db9023b8)
Use bufsiz - 1 not BUFSIZ - 1 when prompting for a password in
the openssl utility.
Thanks to Rob Mackinnon, Leviathan Security for reporting this issue.
(cherry picked from commit 7ba08a4d73)
Don't clear verification errors from the error queue unless
SSL_BUILD_CHAIN_FLAG_CLEAR_ERROR is set.
If errors occur during verification and SSL_BUILD_CHAIN_FLAG_IGNORE_ERROR
is set return 2 so applications can issue warnings.
Some CMS SignedData structure use a signature algorithm OID such
as SHA1WithRSA instead of the RSA algorithm OID. Workaround this
case by tolerating the signature if we recognise the OID.
(cherry picked from commit 3a98f9cf20)
Fix for the attack described in the paper "Recovering OpenSSL
ECDSA Nonces Using the FLUSH+RELOAD Cache Side-channel Attack"
by Yuval Yarom and Naomi Benger. Details can be obtained from:
http://eprint.iacr.org/2014/140
Thanks to Yuval Yarom and Naomi Benger for discovering this
flaw and to Yuval Yarom for supplying a fix.
(cherry picked from commit 2198be3483)
Conflicts:
CHANGES
The problem is that OpenSSH calls EVP_Cipher, which is not as
protective as EVP_CipherUpdate. Formally speaking we ought to
do more checks in *_cipher methods, including rejecting
lengths not divisible by block size (unless ciphertext stealing
is in place). But for now I implement check for zero length in
low-level based on precedent.
PR: 3087, 2775
(cherry picked from commit 5e44c144e6)
Although the memory allocated by compression methods is fixed and
cannot grow over time it can cause warnings in some leak checking
tools. The function SSL_COMP_free_compression_methods() will free
and zero the list of supported compression methods. This should
*only* be called in a single threaded context when an application
is shutting down to avoid interfering with existing contexts
attempting to look up compression methods.
Add option to set an alternative to the default hmacWithSHA1 PRF
for PKCS#8 private key encryptions. This is used automatically
by PKCS8_encrypt if the nid specified is a PRF.
Add option to pkcs8 utility.
Update docs.
Don't set the fips flags in cipher and digests as the implementations
aren't suitable for FIPS mode and will be redirected to the FIPS module
versions anyway.
Return EVP_CIPH_FLAG_FIPS or EVP_MD_FLAG_FIPS if a FIPS implementation
exists when calling EVP_CIPHER_flags and EVP_MD_flags repectively.
Remove unused FIPS code from e_aes.c: the 1.0.2 branch will never be
used to build a FIPS module.
Windows 8 SDKs complain that GetVersion() is deprecated.
We only use GetVersion like this:
(GetVersion() < 0x80000000)
which checks if the Windows version is NT based. Use a macro check_winnt()
which uses GetVersion() on older SDK versions and true otherwise.
(cherry picked from commit a4cc3c8041)
New flags to build certificate chains. The can be used to rearrange
the chain so all an application needs to do is add all certificates
in arbitrary order and then build the chain to check and correct them.
Add verify error code when building chain.
Update docs.
(cherry picked from commit 13dc3ce9ab)
If you use "-newkey rsa" it's supposed to read the default number of bits from the
config file. However the value isn't used to generate the key, but it does
print it's generating such a key. The set_keygen_ctx() doesn't call
EVP_PKEY_CTX_set_rsa_keygen_bits() and you end up with the default set in
pkey_rsa_init() (1024). Afterwards the number of bits gets read from the config
file, but nothing is done with that anymore.
We now read the config first and use the value from the config file when no size
is given.
PR: 2592
(cherry picked from commit 3343220327)
apps/pkcs12.c accepts -password as an argument. The document author
almost certainly meant to write "-password, -passin".
However, that is not correct, either. Actually the code treats
-password as equivalent to -passin, EXCEPT when -export is also
specified, in which case -password as equivalent to -passout.
(cherry picked from commit 856c6dfb09)
Improve CBC decrypt and CTR by ~13/16%, which adds up to ~25/33%
improvement over "pre-Silvermont" version. [Add performance table to
aesni-x86.pl].
(cherry picked from commit 5599c7331b)
as issuer and subject names. Although this is an incompatible change
it should have little impact in pratice because self-issued certificates
that are not self-signed are rarely encountered.
(cherry picked from commit b1efb7161f)
When a chain is complete and ends in a trusted root checks are also
performed on the TA and the callback notified with ok==1. For
consistency do the same for chains where the TA is not self signed.
(cherry picked from commit 385b348666)
If multiple TLS extensions are expected but not received, the TLS extension and supplemental data 'generate' callbacks are the only chance for the receive-side to trigger a specific TLS alert during the handshake.
Removed logic which no-op'd TLS extension generate callbacks (as the generate callbacks need to always be called in order to trigger alerts), and updated the serverinfo-specific custom TLS extension callbacks to track which custom TLS extensions were received by the client, where no-ops for 'generate' callbacks are appropriate.
(cherry picked from commit ac20719d99)
Conflicts:
ssl/t1_lib.c
Removed prior audit proof logic - audit proof support was implemented using the generic TLS extension API
Tests exercising the new supplemental data registration and callback api can be found in ssltest.c.
Implemented changes to s_server and s_client to exercise supplemental data callbacks via the -auth argument, as well as additional flags to exercise supplemental data being sent only during renegotiation.
(cherry picked from commit 36086186a9)
Conflicts:
Configure
apps/s_client.c
apps/s_server.c
ssl/ssl.h
ssl/ssl3.h
ssl/ssltest.c
If an application calls the macro SSL_CTX_get_extra_chain_certs
return either the old "shared" extra certificates or those associated
with the current certificate.
This means applications which call SSL_CTX_use_certificate_chain_file
and retrieve the additional chain using SSL_CTX_get_extra_chain_certs
will still work. An application which only wants to check the shared
extra certificates can call the new macro
SSL_CTX_get_extra_chain_certs_only
(cherry picked from commit a51f767645)
New ctrl sets current certificate based on certain criteria. Currently
two options: set the first valid certificate as current and set the
next valid certificate as current. Using these an application can
iterate over all certificates in an SSL_CTX or SSL structure.
(cherry picked from commit 0f78819c8c)
eliminating them as dead code.
Both volatile and "memory" are used because of some concern that the compiler
may still cache values across the asm block without it, and because this was
such a painful debugging session that I wanted to ensure that it's never
repeated.
(cherry picked from commit 7753a3a684)
Always add a dynamically loaded ENGINE to list. Otherwise it can cause
problems when multiply loaded, especially if it adds new public key methods.
For all current engines we only want a single implementation anyway.
(cherry picked from commit e933f91f50)
The flag SSL_OP_MSIE_SSLV2_RSA_PADDING hasn't done anything since OpenSSL
0.9.7h but deleting it will break source compatibility with any software
that references it. Restore it but #define to zero.
Fix a limitation in SSL_CTX_use_certificate_chain_file(): use algorithm
specific chains instead of the shared chain.
Update docs.
(cherry picked from commit a4339ea3ba)
Conflicts:
CHANGES
When sending an invalid version number alert don't change the
version number to the client version if a session is already
established.
Thanks to Marek Majkowski for additional analysis of this issue.
PR#3191
(cherry picked from commit b77b58a398)
For DTLS we might need to retransmit messages from the previous session
so keep a copy of write context in DTLS retransmission buffers instead
of replacing it after sending CCS. CVE-2013-6450.
(cherry picked from commit 34628967f1)
SHA512_Transform was initially added rather as tribute to tradition
than for practucal reasons. But use was recently found in ssl/s3_cbc.c
and it turned to be problematic on platforms that don't tolerate
misasligned references to memory and lack assembly subroutine.
(cherry picked from commit cdd1acd788)
Move the IP, email and host checking fields from the public
X509_VERIFY_PARAM structure into an opaque X509_VERIFY_PARAM_ID
structure. By doing this the structure can be modified in future
without risk of breaking any applications.
PR: 3176.
In FIPS mode ssleay_rand_bytes is only used for PRNG seeding and is
performed in either a single threaded context (when the PRNG is first
initialised) or under a lock (reseeding). To avoid multiple locks disable
use of CRYPTO_LOCK_RAND in FIPS mode in ssleay_rand_bytes.
rsaz_exp.c: harmonize line terminating;
asm/rsaz-*.pl: minor optimizations.
asm/rsaz-x86_64.pl: sync from master.
(cherry picked from commit 31ed9a2131)
If pointer comparison for current certificate fails check
to see if a match using X509_cmp succeeds for the current
certificate: this is useful for cases where the certificate
pointer is not available.
(cherry picked from commit 6856b288a6e66edd23907b7fa264f42e05ac9fc7)
PR#3169
This patch, which currently applies successfully against master and
1_0_2, adds the following functions:
SSL_[CTX_]select_current_cert() - set the current certificate without
disturbing the existing structure.
SSL_[CTX_]get0_chain_certs() - get the current certificate's chain.
SSL_[CTX_]clear_chain_certs() - clear the current certificate's chain.
The patch also adds these functions to, and fixes some existing errors
in, SSL_CTX_add1_chain_cert.pod.
(cherry picked from commit 2f56c9c015dbca45379c9a725915b3b8e765a119)
Add function to retrieve the signature from a CMS_SignerInfo structure:
applications can then read or modify it.
(cherry picked from commit e8df6cec4c09b9a94c4c07abcf0402d31ec82cc1)
Original definition depended on __LONG_MAX__ that is not guaranteed to
be present. As we don't support platforms with int narrower that 32 bits
it's appropriate to make defition inconditional.
PR: 3165
(cherry picked from commit 96180cac04)
PR: 2809
DTLS/SCTP requires DATA and FORWARD-TSN chunks to be protected with
SCTP-AUTH. It is checked if this has been activated successfully for
the local and remote peer. Due to a bug, however, the
gauth_number_of_chunks field of the authchunks struct is missing on
FreeBSD, and was therefore not considered in the OpenSSL implementation.
This patch sets the corresponding pointer for the check correctly
whether or not this bug is present.
PR: 2808
With DTLS/SCTP the SCTP extension SCTP-AUTH is used to protect DATA and
FORWARD-TSN chunks. The key for this extension is derived from the
master secret and changed with the next ChangeCipherSpec, whenever a new
key has been negotiated. The following Finished then already uses the
new key. Unfortunately, the ChangeCipherSpec and Finished are part of
the same flight as the ClientKeyExchange, which is necessary for the
computation of the new secret. Hence, these messages are sent
immediately following each other, leaving the server very little time to
compute the new secret and pass it to SCTP before the finished arrives.
So the Finished is likely to be discarded by SCTP and a retransmission
becomes necessary. To prevent this issue, the Finished of the client is
still sent with the old key.
Instead, send random bytes, unless SSL_SEND_{CLIENT,SERVER}RANDOM_MODE
is set.
This is a forward-port of commits:
4af793036ff4c93b46ed3da721dac92583270191
While the gmt_unix_time record was added in an ostensible attempt to
mitigate the dangers of a bad RNG, its presence leaks the host's view
of the current time in the clear. This minor leak can help
fingerprint TLS instances across networks and protocols... and what's
worse, it's doubtful thet the gmt_unix_time record does any good at
all for its intended purpose, since:
* It's quite possible to open two TLS connections in one second.
* If the PRNG output is prone to repeat itself, ephemeral
handshakes (and who knows what else besides) are broken.
Removing RSA+MD5 from the default signature algorithm list
prevents its use by default.
If a broken implementation attempts to use RSA+MD5 anyway the sanity
checking of signature algorithms will cause a fatal alert.
(cherry picked from commit 77a0f740d00ecf8f6b01c0685a2f858c3f65a3dd)
Latest MIPS ISA specification declared 'branch likely' instructions
obsolete. To makes code future-proof replace them with equivalent.
(cherry picked from commit 0c2adb0a9b)
Add a script to generate keys and certificates for the S/MIME and CMS
tests.
Update certificates and add EC examples.
(cherry picked from commit a0957d5505)
Add X9.42 DH KDF. Move sharedinfo generation code to CMS library as the
same structure is used by DH and ECDH.
Move ASN1_OBJECT typedef to ossl_typ.h so it can be picked up by dh headers
without the need to use ASN1.
(cherry picked from commit dc1ce3bc64)
For RSA and DSA keys return an appropriate RecipientInfo type. By setting
CMS_RECIPINFO_NONE for DSA keys an appropriate error is returned if
an attempt is made to use DSA with enveloped data.
(cherry picked from commit 41b920ef01)
Check and set AlgorithmIdenfier parameters for key wrap algorithms.
Currently these just set parameters to NULL.
(cherry picked from commit e61f5d55bc)
Add support for ECDH in enveloped data. The CMS ctrls for the EC ASN1
method decode/encode the appropriate parameters from the CMS ASN1 data
and send appropriate data to the EC public key method.
(cherry picked from commit 88e20b8584)
Add hooks to support key agreement recipient info type (KARI) using
algorithm specific code in the relevant public key ASN1 method.
(cherry picked from commit 17c2764d2e)
Add support for custom public key parameters in the cms utility using
the -keyopt switch. Works for -sign and also -encrypt if -recip is used.
(cherry picked from commit 02498cc885)
Extend RSA ASN1 method to support CMS PSS signatures for both sign
and verify.
For signing the EVP_PKEY_CTX parameters are read and the appropriate
CMS structures set up.
For verification the CMS structures are analysed and the corresponding
parameters in the EVP_PKEY_CTX set.
Also add RSA-OAEP support.
For encrypt the EVP_PKEY_CTX parameters are used.
For decrypt the CMS structure is uses to set the appropriate EVP_PKEY_CTX
parameters.
(cherry picked from commit 0574cadf85)
Also sync error codes with OpenSSL 1.0.1 and add new ones.
Add OAEP ctrls to retrieve MD and label. Return errors if
an attempt is made to set or retrieve OAEP parameters when
padding mode is not OAEP.
(cherry picked from commit 211a14f627)
Extend OAEP support. Generalise the OAEP padding functions to support
arbitrary digests. Extend EVP_PKEY RSA method to handle the new OAEP
padding functions and add ctrls to set the additional parameters.
(cherry picked from commit 271fef0ef3)
Conflicts:
CHANGES
Add support for customisation of CMS handling of signed and enveloped
data from custom public key parameters.
This will provide support for RSA-PSS and RSA-OAEP but could also be
applied to other algorithms.
(cherry picked from commit e365352d6a)
Add OIDs for KDF schemes from RFC5753 and add cross references for
each type and the appropriate digest to use.
(cherry picked from commit 6af440ced4)
Conflicts:
crypto/objects/obj_dat.h
crypto/objects/obj_mac.num
Add support for key wrap algorithms via EVP interface.
Generalise AES wrap algorithm and add to modes, making existing
AES wrap algorithm a special case.
Move test code to evptests.txt
(cherry picked from commit 97cf1f6c28)
Conflicts:
CHANGES
Add code to support GCM an CCM modes in evp_test. On encrypt this
will compare the expected ciphertext and tag. On decrypt it will
compare the expected plaintext: tag comparison is done internally.
Add a simple CCM test case and convert all tests from crypto/modes/gcm128.c
(cherry picked from commit 15652f9825)
Make DTLS behave like TLS when negotiating version: record layer has
DTLS 1.0, message version is 1.2.
Tolerate different version numbers if version hasn't been negotiated
yet.
(cherry picked from commit 40088d8b81)
Add DTLS record header parsing, different client hello format and add
HelloVerifyRequest message type.
Add code to d1_pkt.c to send message headers to the message callback.
(cherry picked from commit 890f2f8b92)
Conflicts:
ssl/ssl_locl.h
Check for Suite B support using method flags instead of version numbers:
anything supporting TLS 1.2 cipher suites will also support Suite B.
Return an error if an attempt to use DTLS 1.0 is made in Suite B mode.
(cherry picked from commit 4544f0a691)
If we successfully match a cookie don't set return value to 2 as this
results in other error conditions returning 2 as well.
Instead set return value to -2 which can be checked later if everything
else is OK.
(cherry picked from commit c56f5b8edf)
Add new methods DTLS_*_method() which support both DTLS 1.0 and DTLS 1.2 and
pick the highest version the peer supports during negotiation.
As with SSL/TLS options can change this behaviour specifically
SSL_OP_NO_DTLSv1 and SSL_OP_NO_DTLSv1_2.
(cherry picked from commit c6913eeb76)
Conflicts:
CHANGES
Add DTLS1.2 support for cached records when computing handshake macs
instead of the MD5+SHA1 case for DTLS < 1.2 (this is a port of the
equivalent TLS 1.2 code to DTLS).
(cherry picked from commit 04fac50045)
Add correct flags for DTLS 1.2, update s_server and s_client to handle
DTLS 1.2 methods.
Currently no support for version negotiation: i.e. if client/server selects
DTLS 1.2 it is that or nothing.
(cherry picked from commit c3b344e36a)
Conflicts:
apps/s_server.c
Since this is always called from DTLS code it is safe to assume the header
length should be the DTLS value. This avoids the need to check the version
number and should work with any version of DTLS (not just 1.0).
(cherry picked from commit 9cf0f18754)
Some TLS extensions were disabled for DTLS. Possibly because they caused
problems with the old duplicated code. Enable them again.
(cherry picked from commit 874a18cfad)
Use the enc_flags field to determine whether we should use explicit IV,
signature algorithms or SHA256 default PRF instead of hard coding which
versions support each requirement.
(cherry picked from commit cbd64894ec)
Conflicts:
ssl/ssl_locl.h
Revise DTLS code. There was a *lot* of code duplication in the
DTLS code that generates records. This makes it harder to maintain and
sometimes a TLS update is omitted by accident from the DTLS code.
Specifically almost all of the record generation functions have code like
this:
some_pointer = buffer + HANDSHAKE_HEADER_LENGTH;
... Record creation stuff ...
set_handshake_header(ssl, SSL_MT_SOMETHING, message_len);
...
write_handshake_message(ssl);
Where the "Record creation stuff" is identical between SSL/TLS and DTLS or
in some cases has very minor differences.
By adding a few fields to SSL3_ENC to include the header length, some flags
and function pointers for handshake header setting and handshake writing the
code can cope with both cases.
(cherry picked from commit 173e72e64c)
- EC_GROUP_cmp shouldn't consider curves equal just because
the curve name is the same. (They really *should* be the same
in this case, but there's an EC_GROUP_set_curve_name API,
which could be misused.)
- EC_POINT_cmp shouldn't return 0 for ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED
or EC_R_INCOMPATIBLE_OBJECTS errors because in a cmp API, 0 indicates
equality (not an error).
Reported by: king cope
(cherry picked from commit 312a46791ab465cfa3bf26764361faed0e5df014)
- EC_GROUP_cmp shouldn't consider curves equal just because
the curve name is the same. (They really *should* be the same
in this case, but there's an EC_GROUP_set_curve_name API,
which could be misused.)
- EC_POINT_cmp shouldn't return 0 for ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED
or EC_R_INCOMPATIBLE_OBJECTS errors because in a cmp API, 0 indicates
equality (not an error).
Reported by: king cope
(cherry picked from commit 312a46791ab465cfa3bf26764361faed0e5df014)
When verifying a partial path always check to see if the EE certificate
is explicitly trusted: the path could contain other untrusted certificates.
(cherry picked from commit 52073b7675)
This fix ensures that
* A HelloRequest is retransmitted if not responded by a ClientHello
* The HelloRequest "consumes" the sequence number 0. The subsequent
ServerHello uses the sequence number 1.
* The client also expects the sequence number of the ServerHello to
be 1 if a HelloRequest was received earlier.
This patch fixes the RFC violation.
(cherry picked from commit b62f4daac0)
PR #3090
Reported by: Franck Youssef <fry@open.ch>
If no new reason codes are obtained after checking a CRL exit with an
error to avoid repeatedly checking the same CRL.
This will only happen if verify errors such as invalid CRL scope are
overridden in a callback.
(cherry picked from commit 4b26645c1a)
PR: 3028
Fix bug introduced in PEM_X509_INFO_bio which wouldn't process RSA keys
correctly if they appeared first.
(cherry picked from commit 5ae8d6bcba)
Bug would emerge when XTS is added to bsaes-armv7.pl. Pointed out by
Ard Biesheuvel of Linaro.
(cherry picked from commit 044f63086051d7542fa9485a1432498c39c4d8fa)
Improve RSA sing performance by 20-30% by:
- switching from floating-point to integer conditional moves;
- daisy-chaining sqr-sqr-sqr-sqr-sqr-mul sequences;
- using MONTMUL even during powers table setup;
(cherry picked from commit 4ddacd9921)
Fix PSS signature printing: consistently use 0x prefix for hex values for
padding length and trailer fields.
(cherry picked from commit deb24ad53147f5a8dd63416224a5edd7bbc0e74a)
Note that it initially applies to 1.0.2, and not to HEAD. This is
in order to allow development with existing libunbound installations
that are dependent on OpenSSL 1.0.x. More details in RT.
RT: 3003
Reencode certificates in X509_sign_ctx as well as X509_sign.
This was causing a problem in the x509 application when it modified an
existing certificate.
(cherry picked from commit c6d8adb8a4)
While ARMv7 in general is capable of unaligned access, not all instructions
actually are. And trouble is that compiler doesn't seem to differentiate
those capable and incapable of unaligned access. Side effect is that kernel
goes into endless loop retrying same instruction triggering unaligned trap.
Problem was observed in xts128.c and ccm128.c modules. It's possible to
resolve it by using (volatile u32*) casts, but letting STRICT_ALIGNMENT
be feels more appropriate.
(cherry picked from commit 3bdd80521a)
Don't check for binary curves by checking methods: the values will
be different in FIPS mode as they are redirected to the validated module
version.
(cherry picked from commit 94782e0e9c)
If an ASN1_INTEGER structure is allocated but not explicitly set encode
it as zero: don't generate an invalid zero length INTEGER.
(cherry picked from commit 1643edc63c)
Add CMS_RecipientInfo_encrypt: this function encrypts an existing content
encryption key to match the key in the RecipientInfo structure: this is
useful if a new recpient is added to and existing enveloped data structure.
Add documentation.
(cherry picked from commit e1f1d28f34)
podlators 2.5.0 has switched to dying on POD syntax errors. This means
that a bunch of long-standing erroneous POD in the openssl documentation
now leads to fatal errors from pod2man, halting installation.
Unfortunately POD constraints mean that you have to sort numeric lists
in ascending order if they start with 1: you cannot do 1, 0, 2 even if
you want 1 to appear first. I've reshuffled such (alas, I wish there
were a better way but I don't know of one).
(cherry picked from commit 5cc2707742)
Add description of "allocate and encode" operation for ASN1 routines.
Document how versioning will for after the letter release reaches
y.
(cherry picked from commit 2527b94fec)
The version check for DTLS1_VERSION was redundant as
DTLS1_VERSION > TLS1_1_VERSION, however we do need to
check for DTLS1_BAD_VER for compatibility.
PR:2984
(cherry picked from commit d980abb22e)
Fix the calculation that checks there is enough room in a record
after removing padding and optional explicit IV. (by Steve)
For AEAD remove the correct number of padding bytes (by Andy)
(cherry picked from commit 32cc2479b4)
MD5 should use little endian order. Fortunately the only ciphersuite
affected is EXP-RC2-CBC-MD5 (TLS_RSA_EXPORT_WITH_RC2_CBC_40_MD5) which
is a rarely used export grade ciphersuite.
(cherry picked from commit f306b87d76)
Kludge alert. This is arranged by passing padding length in unused
bits of SSL3_RECORD->type, so that orig_len can be reconstructed.
(cherry picked from commit 8bfd4c659f)
Break dependency on uint64_t. It's possible to declare bits as
unsigned int, because TLS packets are limited in size and 32-bit
value can't overflow.
(cherry picked from commit cab13fc847)
We have to use EVP in FIPS mode so we can only partially mitigate
timing differences.
Make an extra call to EVP_DigestSignUpdate to hash additonal blocks
to cover any timing differences caused by removal of padding.
(cherry picked from commit b908e88ec1)
The previous CBC patch was bugged in that there was a path through enc()
in s3_pkt.c/d1_pkt.c which didn't set orig_len. orig_len would be left
at the previous value which could suggest that the packet was a
sufficient length when it wasn't.
(cherry picked from commit 6cb19b7681)
This patch makes the decoding of SSLv3 and TLS CBC records constant
time. Without this, a timing side-channel can be used to build a padding
oracle and mount Vaudenay's attack.
This patch also disables the stitched AESNI+SHA mode pending a similar
fix to that code.
In order to be easy to backport, this change is implemented in ssl/,
rather than as a generic AEAD mode. In the future this should be changed
around so that HMAC isn't in ssl/, but crypto/ as FIPS expects.
(cherry picked from commit e130841bcc)
This change adds CRYPTO_memcmp, which compares two vectors of bytes in
an amount of time that's independent of their contents. It also changes
several MAC compares in the code to use this over the standard memcmp,
which may leak information about the size of a matching prefix.
(cherry picked from commit 2ee798880a)
the SSL_CONF APIs.
This is complicated a little because the SSL_CTX structure is not available
when the command line is processed: so just check syntax of commands initially
and store them, ready to apply later.
(backport from HEAD)
client hello message. Previously this could only be retrieved on an initial
connection and it was impossible to determine the cipher IDs of any uknown
ciphersuites.
(backport from HEAD)
by a certificate chain. Add additional tests to handle client
certificates: checks for matching certificate type and issuer name
comparison.
Print out results of checks for each candidate chain tested in
s_server/s_client.
(backport from HEAD)
possible to have different stores per SSL structure or one store in
the parent SSL_CTX. Include distint stores for certificate chain
verification and chain building. New ctrl SSL_CTRL_BUILD_CERT_CHAIN
to build and store a certificate chain in CERT structure: returing
an error if the chain cannot be built: this will allow applications
to test if a chain is correctly configured.
Note: if the CERT based stores are not set then the parent SSL_CTX
store is used to retain compatibility with existing behaviour.
(backport from HEAD)
details in s_client.
Also add ctrl to set client certificate types. If not used sensible values
will be included based on supported signature algorithms: for example if
we don't include any DSA signing algorithms the DSA certificate type is
omitted.
Fix restriction in old code where certificate types would be truncated
if it exceeded TLS_CT_NUMBER.
(backport from HEAD)
the permitted signature algorithms for server and client authentication
are the same but it is now possible to set different algorithms for client
authentication only.
(backport from HEAD)
is required by client or server. An application can decide which
certificate chain to present based on arbitrary criteria: for example
supported signature algorithms. Add very simple example to s_server.
This fixes many of the problems and restrictions of the existing client
certificate callback: for example you can now clear existing certificates
and specify the whole chain.
(backport from HEAD)
the certificate can be used for (if anything). Set valid_flags field
in new tls1_check_chain function. Simplify ssl_set_cert_masks which used
to have similar checks in it.
Add new "cert_flags" field to CERT structure and include a "strict mode".
This enforces some TLS certificate requirements (such as only permitting
certificate signature algorithms contained in the supported algorithms
extension) which some implementations ignore: this option should be used
with caution as it could cause interoperability issues.
(backport from HEAD)
Only store encoded versions of peer and configured signature algorithms.
Determine shared signature algorithms and cache the result along with NID
equivalents of each algorithm.
(backport from HEAD)
TLS v1.2. These are sent as an extension for clients and during a certificate
request for servers.
TODO: add support for shared signature algorithms, respect shared algorithms
when deciding which ciphersuites and certificates to permit.
(backport from HEAD)
Support - as a file for standard input or output.
Add -badsig option to generate invalid signatures for testing.
New -rmd option to specify digest to sign OCSP responses with.
Multiple copies of the ENGINE will cause problems when it is cleaned up as
the methods are stored in static structures which will be overwritten and
freed up more than once.
Set static methods to NULL when the ENGINE is freed so it can be reloaded.
Reported by: Tomas Mraz <tmraz@redhat.com>
Treat a NULL value passed to drbg_free_entropy callback as non-op. This
can happen if the call to fips_get_entropy fails.
When in FIPS mode the approved implementations are used as normal,
when not in FIPS mode the internal unapproved versions are used instead.
This means that the FIPS capable OpenSSL isn't forced to use the
(often lower perfomance) FIPS implementations outside FIPS mode.
Reported by: Phil Pennock <openssl-dev@spodhuis.org>
Make renegotiation work for TLS 1.2, 1.1 by not using a lower record
version client hello workaround if renegotiating.
of digest algorithms, mosty SHA, on Power7. Mystery of century, why SHA,
why slower algorithm are affected more... [from HEAD].
PR: 2794
Submitted by: Ashley Lai
BUF_mem_grow and BUF_mem_grow_clean. Refuse attempts to shrink buffer
in CRYPTO_realloc_clean.
Thanks to Tavis Ormandy, Google Security Team, for discovering this
issue and to Adam Langley <agl@chromium.org> for fixing it. (CVE-2012-2110)
If OPENSSL_MAX_TLS1_2_CIPHER_LENGTH is set then limit the size of client
ciphersuites to this value. A value of 50 should be sufficient.
Document workarounds in CHANGES.
Some servers hang when presented with a client hello record length exceeding
255 bytes but will work with longer client hellos if the TLS record version
in client hello does not exceed TLS v1.0. Unfortunately this doesn't fix all
cases...
enabled instead of requiring an application to hard code a (possibly
inappropriate) parameter set and delve into EC internals we just
automatically use the preferred curve.
(backport from HEAD)
Tidy some code up.
Don't allocate a structure to handle ECC extensions when it is used for
default values.
Make supported curves configurable.
Add ctrls to retrieve shared curves: not fully integrated with rest of
ECC code yet.
(backport from HEAD)
extensions to s_client and s_server to print out retrieved valued.
Extend CERT structure to cache supported signature algorithm data.
(backport from HEAD)
between NIDs and the more common NIST names such as "P-256". Enhance
ecparam utility and ECC method to recognise the NIST names for curves.
(backport from HEAD)
structure.
Before this the only way to add a custom chain was in the parent SSL_CTX
(which is shared by all key types and SSL structures) or rely on auto
chain building (which is performed on each handshake) from the trust store.
(backport from HEAD)
continue with symmetric decryption process to avoid leaking timing
information to an attacker.
Thanks to Ivan Nestlerode <inestlerode@us.ibm.com> for discovering
this issue. (CVE-2012-0884)
Reported by: Remi Gacogne <rgacogne-bugs@coredump.fr>
Preserve unused bits value in non-canonicalised ASN1_STRING structures
by using ASN1_STRING_copy which preseves flags.
Submitted by: Bruce Stephens <bruce.stephens@isode.com>
Use same construct for EXHEADER in srp/Makefile as other makefiles to cope
with possibly empty EXHEADER.
signatures and MDC2 using EVP or RSA_sign. This has become more apparent
when the dgst utility in OpenSSL 1.0.0 and later switched to using the
EVP_DigestSign functions which call RSA_sign.
This means that the signature format OpenSSL 1.0.0 and later used with
dgst -sign and MDC2 is incompatible with previous versions.
Add detection in RSA_verify so either format works.
Note: MDC2 is disabled by default in OpenSSL and very rarely used in practice.
Thanks to Antonio Martin, Enterprise Secure Access Research and
Development, Cisco Systems, Inc. for discovering this bug and
preparing a fix. (CVE-2012-0050)
Submitted by: steve
Update maximum message size for certifiate verify messages to support
4096 bit RSA keys again as TLS v1.2 messages is two bytes longer.
Submitted by: Peter Sylvester <peter.sylvester@edelweb.fr>
Reviewed by: steve
- remove some unncessary SSL_err and permit
an srp user callback to allow a worker to obtain
a user verifier.
- cleanup and comments in s_server and demonstration
for asynchronous srp user lookup
New function to retrieve compression method from SSL_SESSION structure.
Delete SSL_SESSION_get_id_len and SSL_SESSION_get0_id functions
as they duplicate functionality of SSL_SESSION_get_id. Note: these functions
have never appeared in any release version of OpenSSL.
Submitted by: Peter Sylvester <peter.sylvester@edelweb.fr>
Reviewed by: steve
Remove unnecessary code for srp and to add some comments to
s_client.
- the callback to provide a user during client connect is
no longer necessary since rfc 5054 a connection attempt
with an srp cipher and no user is terminated when the
cipher is acceptable
- comments to indicate in s_client the (non-)usefulness of
th primalaty tests for non known group parameters.
Submitted by: Peter Sylvester <peter.sylvester@edelweb.fr>
Reviewed by: steve
Make SRP conformant to rfc 5054.
Changes are:
- removal of the addition state after client hello
- removal of all pre-rfc srp alert ids
- sending a fatal alert when there is no srp extension but when the
server wants SRP
- removal of unnecessary code in the client.
Submitted by: Robin Seggelmann <seggelmann@fh-muenster.de>
Reviewed by: steve
Send alert instead of assertion failure for incorrectly formatted DTLS
fragments.
Submitted by: Doug Goldstein <cardoe@gentoo.org>
Reviewed by: steve
Include header file stdlib.h which is needed on some platforms to get
getenv() declaration.
using OBJ xref utilities instead of string comparison with OID name.
This removes the arbitrary restriction on using SHA1 only with some ECC
ciphersuites.
Reported by: Daniel Marschall <daniel-marschall@viathinksoft.de>
Reviewed by: steve
Fix OID routines.
Check on encoding leading zero rejection should start at beginning of
encoding.
Allow for initial digit when testing when to use BIGNUMs which can increase
first value by 2 * 40.
such operation can be considered as breaking binary compatibility. However!
OPNESSL_ia32cap_P is accessed by application through pointer returned by
OPENSSL_ia32cap_loc() and such change of *internal* OPENSSL_ia32cap_P
declaration is possible specifically on little-endian platforms, such as
x86[_64] ones in question. In addition, if 32-bit application calls
OPENSSL_ia32cap_loc(), it clears upper half of capability vector maintaining
the illusion that it's still 32 bits wide.
Move compression, point2oct and oct2point functions into separate files.
Add a flags field to EC_METHOD.
Add a flag EC_FLAGS_DEFAULT_OCT to use the default compession and oct functions
(all existing methods do this). This removes dependencies from EC_METHOD while
keeping original functionality.
Backport from HEAD with minor changes.
use of assembly language routines: rename the assembly language function
to the private_* variant unconditionally and perform tests from a small
C wrapper.
Add static build support to openssl utility.
Add new "fips" option to Configure.
Make use of installed fipsld and fips_standalone_sha1
Initialise FIPS error callbacks, locking and DRBG.
Doesn't do anything much yet: no crypto is redirected to the FIPS module.
Doesn't completely build either but the openssl utility can enter FIPS mode:
which doesn't do anything much either.
Submitted by: Robin Seggelmann <seggelmann@fh-muenster.de>
Reviewed by: steve
Setting SSL_MODE_RELEASE_BUFFERS should be ignored for DTLS, but instead causes
the program to crash. This is due to missing version checks and is fixed with
this patch.
Submitted by: Marcus Meissner <meissner@suse.de>
Reviewed by: steve
Call ssl_new() to reallocate SSL BIO internals if we want to replace
the existing internal SSL structure.
than client side as we need to keep the handshake record cache frozen when
it contains all the records need to process the certificate verify message.
(backport from HEAD).
Parse certificate request message and set digests appropriately.
Generate new TLS v1.2 format certificate verify message.
Keep handshake caches around for longer as they are needed for client auth.
all ssl related structures are opaque and internals cannot be directly
accessed. Many applications will need some modification to support this and
most likely some additional functions added to OpenSSL.
The advantage of this option is that any application supporting it will still
be binary compatible if SSL structures change.
(backport from HEAD).
different options:
"64" The build system will choose /POINTER_SIZE=64=ARGV if
the compiler supports it, otherwise /POINTER_SIZE=64.
"64=" The build system will force /POINTER_SIZE=64.
"64=ARGV" The build system will force /POINTER_SIZE=64=ARGV.
This meant a slight renumbering in util/libeay.num due to symbols
appearing in 1.0.0-stable. However, since there's been no release on
this branch yet, it should be harmless.
with turning trapping back on.
* test/maketests.com: Do the same check for /POINTER_SIZE=64=ARGV
here.
* test/clean-test.com: A new script for cleaning up.
directly in main(). 'if needed' also includes when argv is a 32 bit
pointer in an otherwise 64 bit environment.
* apps/makeapps.com: When using /POINTER_SIZE=64, try to use the additional
=ARGV, but only if it's supported. Fortunately, DCL is very helpful
telling us in this case.
- safestack macro changes for C++ were incomplete
- RLE decompression boundary case
- SSL 2.0 key arg length check
Submitted by: Google (Adam Langley, Neel Mehta, Bodo Moeller)
seed to: this doesn't introduce any binary compatibility issues as the
function is only used internally.
The seed output is needed for FIPS 140-2 algorithm testing: the functionality
used to be in DSA_generate_parameters_ex() but was removed in OpenSSL 1.0.0
Submitted by: Jack Lloyd <lloyd@randombit.net>, "Mounir IDRASSI" <mounir.idrassi@idrix.net>, steve
Reviewed by: steve
As required by RFC4492 an absent supported points format by a server is
not an error: it should be treated as equivalent to an extension only
containing uncompressed.
stops complaining about a missing configuration file. Define the logical
name PERL_ENV_TABLES with values to Perl considers the DCL symbol table
as part of the environment (see 'man perlvms' for details), so cms-test.pl
can get the value of EXE_DIR from tests.com, among others.
* cms-test.pl: Make changes to have it work on VMS as well. Upper or mixed
case options need to be quoted and the openssl command needs a VMS-specific
treatment. It all should work properly on Unix, I hope it does on Windows
as well...
Submitted by: Damien Miller <djm@mindrot.org>
Reviewed by: steve
Stop pkeyutl crashing if some arguments are missing. Also make str2fmt
tolerate NULL parameter.
this means that some implementations will be used automatically, e.g. aesni,
we do this for cryptodev anyway.
Setup cpuid in ENGINE_load_builtin_engines() too as some ENGINEs use it.
Binary compatibility is not affected as this will only be
compiled in if explicitly requested (#ifdef EC_NISTP224_64_GCC_128).
Submitted by: Emilia Kasper (Google)
this means that some implementations will be used automatically, e.g. aesni,
we do this for cryptodev anyway.
Setup cpuid in ENGINE_load_builtin_engines() too as some ENGINEs use it.
Modest improvement coefficients mean that code already had some
parallelism and there was not very much room for improvement. Special
thanks to Ted Krovetz for benchmarking the code with such patience.
Submitted By: De Rudder, Stephen L." <s_derudder@tditx.com>
Workaround for newer Windows headers which define EADDRINUSE but not to the
same value as WSAEADDRINUSE.
Submitted By: Ger Hobbelt <ger@hobbelt.com>
Base64 BIO fixes:
Use OPENSSL_assert() instead of assert().
Use memmove() as buffers overlap.
Fix write retry logic.
Submitted By: Artem Chuprina <ran@cryptocom.ru>
Check return values of HMAC in tls_P_hash and tls1_generate_key_block.
Although the previous version could in theory crash that would only happen if a
digest call failed. The standard software methods can never fail and only one
ENGINE currently uses digests and it is not compiled in by default.
directly by SSL/TLS SHA2 certificates are becoming more common and
applications that only call SSL_library_init() and not
OpenSSL_add_all_alrgorithms() will fail when verifying certificates.
Update docs.
Submitted By: Jaroslav Imrich <jaroslav.imrich@disig.sk>
The prompt_info and wrong_info parameters can be empty strings which
can produce confusing prompts. Treat empty string same as NULL.
PR#1999 broke fork detection by assuming HAVE_FORK was set for all platforms.
Include original HAVE_FORK detection logic while allowing it to be
overridden on specific platforms with -DHAVE_FORK=1 or -DHAVE_FORK=0
initial connection to unpatched servers. There are no additional security
concerns in doing this as clients don't see renegotiation during an
attack anyway.
Submitted by: Tomas Mraz <tmraz@redhat.com>
Since SSLv2 doesn't support renegotiation at all don't reject it if
legacy renegotiation isn't enabled.
Also can now use SSL2 compatible client hello because RFC5746 supports it.
Submitted by: "Noszticzius, Istvan" <inoszticzius@rightnow.com>
Don't clear the output buffer: ciphers should correctly the same input
and output buffers.
Submitted by: steve@openssl.org
More robust fix and workaround for PR#1949. Don't try to work out if there
is any write pending data as this can be unreliable: always flush.
Submitted by: Kevin Regan <k.regan@f5.com>
Clear stat structure if -DPURIFY is set to avoid problems on some
platforms which include unitialised fields.
ctrl is incorrectly implemented (e.g. some versions of Apache). As a workaround
call both BIO_CTRL_INFO and BIO_CTRL_WPENDING if it returns zero. This should
both address the original bug and retain compatibility with the old behaviour.
algorithms not found when an application uses PKCS#12 and only calls
SSL_library_init() instead of OpenSSL_add_all_algorithms(). Simple
work around is to add the missing algorithm (40 bit RC2) in
SSL_library_init().
Submitted by: steve@openssl.org
Fix DTLS connection so new_session is reset if we read second client hello:
new_session is used to detect renegotiation.
Although it will be many years before TLS v2.0 or later appears old versions
of servers have a habit of hanging around for a considerable time so best
if we handle this properly now.
work in SSLv3: initial handshake has no extensions but includes MCSV, if
server indicates RI support then renegotiation handshakes include RI.
NB: current MCSV value is bogus for testing only, will be updated when we
have an official value.
Change mismatch alerts to handshake_failure as required by spec.
Also have some debugging fprintfs so we can clearly see what is going on
if OPENSSL_RI_DEBUG is set.
Submitted by: Arkadiusz Miskiewicz <arekm@maven.pl>
Approved by: steve@openssl.org
Fix for out range of signed 32bit displacement error on newer binutils
in file sha1-x86_64.pl
Submitted by: Martin Kaiser <lists@kaiser.cx>, Stephen Henson
Approved by: steve@openssl.org
If an OID has no short name or long name return the numerical representation.
of when a session is loaded. This will mean that applications that
just hold onto SSL_SESSION structures and never call d2i_SSL_SESSION()
will still work.
The functions ENGINE_ctrl(), OPENSSL_isservice(), EVP_PKEY_sign(),
CMS_get1_RecipientRequest() and RAND_bytes() can return <=0 on error fix
so the return code is checked correctly.
Submitted by: steve@openssl.org
Fix to make DHparams_dup() et al work in C++.
For 1.0 fix the final argument to ASN1_dup() so it is void *. Replace some
*_dup macros with functions.
Submitted by: steve@openssl.org
Include a flag ASN1_STRING_FLAG_MSTRING when a multi string type is created.
This makes it possible to tell if the underlying type is UTCTime,
GeneralizedTime or Time when the structure is reused and X509_time_adj_ex()
can handle each case in an appropriate manner.
Add error checking to CRL generation in ca utility when nextUpdate is being
set.
Submitted by: "Alexei Khlebnikov" <alexei.khlebnikov@opera.com>
Approved by: steve@openssl.org
Avoid memory leak and fix error reporting in d2i_SSL_SESSION(). NB: although
the ticket mentions buffer overruns this isn't a security issue because
the SSL_SESSION structure is generated internally and it should never be
possible to supply its contents from an untrusted application (this would
among other things destroy session cache security).
Submitted by: steve@openssl.org
Some systems have broken IPv6 headers and/or implementations. If
OPENSSL_USE_IPV6 is set to 0 IPv6 is not used, if it is set to 1 it is used
and if undefined an attempt is made to detect at compile time by checking
if AF_INET6 is set and excluding known problem platforms.
Submitted by: "Bayram Kurumahmut" <kbayram@ubicom.com>
Approved by: steve@openssl.org
Don't use HAVE_FORK in apps/speed.c it can conflict with configured version.
Fix nasty SSL BIO pop bug. Since this changes the behaviour of SSL BIOs and
will break applications that worked around the bug only included in 1.0.0 and
later.
Submitted by: "Victor B. Wagner" <vitus@cryptocom.ru>
Approved by: steve@openssl.org
Document/clarify use of some options and include details of GOST algorihthm
usage.
Submitted by: Tim Rice <tim@multitalents.net>
Approved by: steve@openssl.org
Allow SOCKLEN_T type to be overridden at config time e.g.
./config -DSOCKLEN_T=int
VALUE "Comments", "WARNING: TEST VERSION ONLY ***NOT*** FIPS 140-2 VALIDATED.\\0"
#endif
// Required:
// Required:
VALUE "CompanyName", "The OpenSSL Project, http://www.openssl.org/\\0"
#if defined(FIPS)
VALUE "FileDescription", "TEST UNVALIDATED FIPS140-2 DLL\\0"
#else
VALUE "FileDescription", "OpenSSL Shared Library\\0"
#endif
VALUE "FileVersion", "$version\\0"
#if defined(CRYPTO)
VALUE "InternalName", "libeay32\\0"
@@ -2043,15 +2077,12 @@ BEGIN
#elif defined(SSL)
VALUE "InternalName", "ssleay32\\0"
VALUE "OriginalFilename", "ssleay32.dll\\0"
#elif defined(FIPS)
VALUE "InternalName", "libosslfips\\0"
VALUE "OriginalFilename", "libosslfips.dll\\0"
#endif
VALUE "ProductName", "The OpenSSL Toolkit\\0"
VALUE "ProductVersion", "$version\\0"
// Optional:
//VALUE "Comments", "\\0"
VALUE "LegalCopyright", "Copyright <20> 1998-2005 The OpenSSL Project. Copyright <20> 1995-1998 Eric A. Young, Tim J. Hudson. All rights reserved.\\0"
VALUE "LegalCopyright", "Copyright <EFBFBD> 1998-2005 The OpenSSL Project. Copyright <20> 1995-1998 Eric A. Young, Tim J. Hudson. All rights reserved.\\0"
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
