prepare for release

Reviewed by: steve

Fix for DTLS plaintext recovery attack discovered by Nadhem Alfardan and
Kenny Paterson.

ACKNOWLEDGMENTS

@@ -0,0 +1,25 @@
+The OpenSSL project depends on volunteer efforts and financial support from
+the end user community. That support comes in the form of donations and paid
+sponsorships, software support contracts, paid consulting services
+and commissioned software development.
+
+Since all these activities support the continued development and improvement
+of OpenSSL we consider all these clients and customers as sponsors of the
+OpenSSL project.
+
+We would like to identify and thank the following such sponsors for their past
+or current significant support of the OpenSSL project:
+
+Very significant support:
+
+	OpenGear: www.opengear.com
+
+Significant support:
+
+	PSW Group: www.psw.net
+
+Please note that we ask permission to identify sponsors and that some sponsors
+we consider eligible for inclusion here have requested to remain anonymous.
+
+Additional sponsorship or financial support is always welcome: for more
+information please contact the OpenSSL Software Foundation.

CHANGES

@@ -2,9 +2,120 @@
  OpenSSL CHANGES
  _______________
 
- Changes between 1.0.0a and 1.0.0b  [xx XXX xxxx]
+ Changes between 1.0.0e and 1.0.0f [4 Jan 2012]
 
-  *)
+  *) Nadhem Alfardan and Kenny Paterson have discovered an extension
+     of the Vaudenay padding oracle attack on CBC mode encryption
+     which enables an efficient plaintext recovery attack against
+     the OpenSSL implementation of DTLS. Their attack exploits timing
+     differences arising during decryption processing. A research
+     paper describing this attack can be found at:
+                  http://www.isg.rhul.ac.uk/~kp/dtls.pdf
+     Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
+     Security Group at Royal Holloway, University of London
+     (www.isg.rhul.ac.uk) for discovering this flaw and to Robin Seggelmann
+     <seggelmann@fh-muenster.de> and Michael Tuexen <tuexen@fh-muenster.de>
+     for preparing the fix. (CVE-2011-4108)
+     [Robin Seggelmann, Michael Tuexen]
+
+  *) Clear bytes used for block padding of SSL 3.0 records.
+     (CVE-2011-4576)
+     [Adam Langley (Google)]
+
+  *) Only allow one SGC handshake restart for SSL/TLS. (CVE-2011-4619)
+     [Adam Langley (Google)]
+
+  *) Check parameters are not NULL in GOST ENGINE. (CVE-2012-0027)
+     [Andrey Kulikov <amdeich@gmail.com>]
+
+  *) Prevent malformed RFC3779 data triggering an assertion failure.
+     Thanks to Andrew Chi, BBN Technologies, for discovering the flaw
+     and Rob Austein <sra@hactrn.net> for fixing it. (CVE-2011-4577)
+     [Rob Austein <sra@hactrn.net>]
+
+  *) Improved PRNG seeding for VOS.
+     [Paul Green <Paul.Green@stratus.com>]
+
+  *) Fix ssl_ciph.c set-up race.
+     [Adam Langley (Google)]
+
+  *) Fix spurious failures in ecdsatest.c.
+     [Emilia Käsper (Google)]
+
+  *) Fix the BIO_f_buffer() implementation (which was mixing different
+     interpretations of the '..._len' fields).
+     [Adam Langley (Google)]
+
+  *) Fix handling of BN_BLINDING: now BN_BLINDING_invert_ex (rather than
+     BN_BLINDING_invert_ex) calls BN_BLINDING_update, ensuring that concurrent
+     threads won't reuse the same blinding coefficients.
+
+     This also avoids the need to obtain the CRYPTO_LOCK_RSA_BLINDING
+     lock to call BN_BLINDING_invert_ex, and avoids one use of
+     BN_BLINDING_update for each BN_BLINDING structure (previously,
+     the last update always remained unused).
+     [Emilia Käsper (Google)]
+
+  *) In ssl3_clear, preserve s3->init_extra along with s3->rbuf.
+     [Bob Buckholz (Google)]
+
+ Changes between 1.0.0d and 1.0.0e [6 Sep 2011]
+
+  *) Fix bug where CRLs with nextUpdate in the past are sometimes accepted
+     by initialising X509_STORE_CTX properly. (CVE-2011-3207)
+     [Kaspar Brand <ossl@velox.ch>]
+
+  *) Fix SSL memory handling for (EC)DH ciphersuites, in particular
+     for multi-threaded use of ECDH. (CVE-2011-3210)
+     [Adam Langley (Google)]
+
+  *) Fix x509_name_ex_d2i memory leak on bad inputs.
+     [Bodo Moeller]
+
+  *) Remove hard coded ecdsaWithSHA1 signature tests in ssl code and check
+     signature public key algorithm by using OID xref utilities instead.
+     Before this you could only use some ECC ciphersuites with SHA1 only.
+     [Steve Henson]
+
+  *) Add protection against ECDSA timing attacks as mentioned in the paper
+     by Billy Bob Brumley and Nicola Tuveri, see:
+
+	http://eprint.iacr.org/2011/232.pdf
+
+     [Billy Bob Brumley and Nicola Tuveri]
+
+ Changes between 1.0.0c and 1.0.0d [8 Feb 2011]
+
+  *) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
+     [Neel Mehta, Adam Langley, Bodo Moeller (Google)]
+
+  *) Fix bug in string printing code: if *any* escaping is enabled we must
+     escape the escape character (backslash) or the resulting string is
+     ambiguous.
+     [Steve Henson]
+
+ Changes between 1.0.0b and 1.0.0c  [2 Dec 2010]
+
+  *) Disable code workaround for ancient and obsolete Netscape browsers
+     and servers: an attacker can use it in a ciphersuite downgrade attack.
+     Thanks to Martin Rex for discovering this bug. CVE-2010-4180
+     [Steve Henson]
+
+  *) Fixed J-PAKE implementation error, originally discovered by
+     Sebastien Martini, further info and confirmation from Stefan
+     Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
+     [Ben Laurie]
+
+ Changes between 1.0.0a and 1.0.0b  [16 Nov 2010]
+
+  *) Fix extension code to avoid race conditions which can result in a buffer
+     overrun vulnerability: resumed sessions must not be modified as they can
+     be shared by multiple threads. CVE-2010-3864
+     [Steve Henson]
+
+  *) Fix WIN32 build system to correctly link an ENGINE directory into
+     a DLL. 
+     [Steve Henson]
 
  Changes between 1.0.0 and 1.0.0a  [01 Jun 2010]
 
@@ -853,7 +964,93 @@
   *) Change 'Configure' script to enable Camellia by default.
      [NTT]
   
- Changes between 0.9.8n and 0.9.8o [xx XXX xxxx]
+ Changes between 0.9.8r and 0.9.8s [xx XXX xxxx]
+
+  *) Fix ssl_ciph.c set-up race.
+     [Adam Langley (Google)]
+
+  *) Fix spurious failures in ecdsatest.c.
+     [Emilia Käsper (Google)]
+
+  *) Fix the BIO_f_buffer() implementation (which was mixing different
+     interpretations of the '..._len' fields).
+     [Adam Langley (Google)]
+
+  *) Fix handling of BN_BLINDING: now BN_BLINDING_invert_ex (rather than
+     BN_BLINDING_invert_ex) calls BN_BLINDING_update, ensuring that concurrent
+     threads won't reuse the same blinding coefficients.
+
+     This also avoids the need to obtain the CRYPTO_LOCK_RSA_BLINDING
+     lock to call BN_BLINDING_invert_ex, and avoids one use of
+     BN_BLINDING_update for each BN_BLINDING structure (previously,
+     the last update always remained unused).
+     [Emilia Käsper (Google)]
+
+  *) Fix SSL memory handling for (EC)DH ciphersuites, in particular
+     for multi-threaded use of ECDH.
+     [Adam Langley (Google)]
+
+  *) Fix x509_name_ex_d2i memory leak on bad inputs.
+     [Bodo Moeller]
+
+  *) Add protection against ECDSA timing attacks as mentioned in the paper
+     by Billy Bob Brumley and Nicola Tuveri, see:
+
+	http://eprint.iacr.org/2011/232.pdf
+
+     [Billy Bob Brumley and Nicola Tuveri]
+
+ Changes between 0.9.8q and 0.9.8r [8 Feb 2011]
+
+  *) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
+     [Neel Mehta, Adam Langley, Bodo Moeller (Google)]
+
+  *) Fix bug in string printing code: if *any* escaping is enabled we must
+     escape the escape character (backslash) or the resulting string is
+     ambiguous.
+     [Steve Henson]
+
+ Changes between 0.9.8p and 0.9.8q [2 Dec 2010]
+
+  *) Disable code workaround for ancient and obsolete Netscape browsers
+     and servers: an attacker can use it in a ciphersuite downgrade attack.
+     Thanks to Martin Rex for discovering this bug. CVE-2010-4180
+     [Steve Henson]
+
+  *) Fixed J-PAKE implementation error, originally discovered by
+     Sebastien Martini, further info and confirmation from Stefan
+     Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
+     [Ben Laurie]
+
+ Changes between 0.9.8o and 0.9.8p [16 Nov 2010]
+
+  *) Fix extension code to avoid race conditions which can result in a buffer
+     overrun vulnerability: resumed sessions must not be modified as they can
+     be shared by multiple threads. CVE-2010-3864
+     [Steve Henson]
+
+  *) Fix for double free bug in ssl/s3_clnt.c CVE-2010-2939
+     [Steve Henson]
+
+  *) Don't reencode certificate when calculating signature: cache and use
+     the original encoding instead. This makes signature verification of
+     some broken encodings work correctly.
+     [Steve Henson]
+
+  *) ec2_GF2m_simple_mul bugfix: compute correct result if the output EC_POINT
+     is also one of the inputs.
+     [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
+
+  *) Don't repeatedly append PBE algorithms to table if they already exist.
+     Sort table on each new add. This effectively makes the table read only
+     after all algorithms are added and subsequent calls to PKCS12_pbe_add
+     etc are non-op.
+     [Steve Henson]
+
+ Changes between 0.9.8n and 0.9.8o [01 Jun 2010]
+
+  [NB: OpenSSL 0.9.8o and later 0.9.8 patch levels were released after
+  OpenSSL 1.0.0.]
 
   *) Correct a typo in the CMS ASN1 module which can result in invalid memory
      access or freeing data twice (CVE-2010-0742)
@@ -864,6 +1061,12 @@
      SSL_library_init and not OpenSSL_add_all_algorithms() will fail.
      [Steve Henson]
 
+  *) VMS fixes: 
+     Reduce copying into .apps and .test in makevms.com
+     Don't try to use blank CA certificate in CA.com
+     Allow use of C files from original directories in maketests.com
+     [Steven M. Schweda" <sms@antinode.info>]
+
  Changes between 0.9.8m and 0.9.8n [24 Mar 2010]
 
   *) When rejecting SSL/TLS records due to an incorrect version number, never
@@ -872,8 +1075,8 @@
      - OpenSSL 0.9.8f if 'short' is longer than 16 bits,
      the previous behavior could result in a read attempt at NULL when
      receiving specific incorrect SSL/TLS records once record payload
-     protection is active.  (CVE-2010-####)
-     [Bodo Moeller, Adam Langley]
+     protection is active.  (CVE-2010-0740)
+     [Bodo Moeller, Adam Langley <agl@chromium.org>]
 
   *) Fix for CVE-2010-0433 where some kerberos enabled versions of OpenSSL 
      could be crashed if the relevant tables were not present (e.g. chrooted).

Configure

@@ -196,8 +196,8 @@ my %table=(
 "cc",		"cc:-O::(unknown)::::::",
 
 ####VOS Configurations
-"vos-gcc","gcc:-O3 -Wall -D_POSIX_C_SOURCE=200112L -D_BSD -D_VOS_EXTENDED_NAMES -DB_ENDIAN::(unknown):VOS:-Wl,-map:BN_LLONG:${no_asm}:::::.so:",
-"debug-vos-gcc","gcc:-O0 -g -Wall -D_POSIX_C_SOURCE=200112L -D_BSD -D_VOS_EXTENDED_NAMES -DB_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG::(unknown):VOS:-Wl,-map:BN_LLONG:${no_asm}:::::.so:",
+"vos-gcc","gcc:-O3 -Wall -DOPENSSL_SYSNAME_VOS -D_POSIX_C_SOURCE=200112L -D_BSD -D_VOS_EXTENDED_NAMES -DB_ENDIAN::(unknown):VOS:-Wl,-map:BN_LLONG:${no_asm}:::::.so:",
+"debug-vos-gcc","gcc:-O0 -g -Wall -DOPENSSL_SYSNAME_VOS -D_POSIX_C_SOURCE=200112L -D_BSD -D_VOS_EXTENDED_NAMES -DB_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG::(unknown):VOS:-Wl,-map:BN_LLONG:${no_asm}:::::.so:",
 
 #### Solaris x86 with GNU C setups
 # -DOPENSSL_NO_INLINE_ASM switches off inline assembler. We have to do it
@@ -492,6 +492,8 @@ my %table=(
 # Win64 targets, WIN64I denotes IA-64 and WIN64A - AMD64
 "VC-WIN64I","cl:-W3 -Gs0 -Gy -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64I::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:ia64cpuid.o:ia64.o::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o:::::::ias:win32",
 "VC-WIN64A","cl:-W3 -Gs0 -Gy -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64A::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:x86_64cpuid.o:bn_asm.o x86_64-mont.o::aes-x86_64.o::md5-x86_64.o:sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o::rc4-x86_64.o:::wp-x86_64.o:cmll-x86_64.o cmll_misc.o:auto:win32",
+"debug-VC-WIN64I","cl:-W3 -Gs0 -Gy -Zi -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64I::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:ia64cpuid.o:ia64.o::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o:::::::ias:win32",
+"debug-VC-WIN64A","cl:-W3 -Gs0 -Gy -Zi -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64A::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:x86_64cpuid.o:bn_asm.o x86_64-mont.o::aes-x86_64.o::md5-x86_64.o:sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o::rc4-x86_64.o:::wp-x86_64.o:cmll-x86_64.o cmll_misc.o:auto:win32",
 # x86 Win32 target defaults to ANSI API, if you want UNICODE, complement
 # 'perl Configure VC-WIN32' with '-DUNICODE -D_UNICODE'
 "VC-WIN32","cl:-W3 -WX -Gs0 -GF -Gy -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -D_CRT_SECURE_NO_DEPRECATE:::WIN32::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}:${x86_asm}:win32n:win32",
@@ -551,7 +553,7 @@ my %table=(
 "darwin64-ppc-cc","cc:-arch ppc64 -O3 -DB_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${ppc64_asm}:osx64:dlfcn:darwin-shared:-fPIC -fno-common:-arch ppc64 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
 "darwin-i386-cc","cc:-arch i386 -O3 -fomit-frame-pointer -DL_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:BN_LLONG RC4_INT RC4_CHUNK DES_UNROLL BF_PTR:${x86_asm}:macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch i386 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
 "debug-darwin-i386-cc","cc:-arch i386 -g3 -DL_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:BN_LLONG RC4_INT RC4_CHUNK DES_UNROLL BF_PTR:${x86_asm}:macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch i386 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
-"darwin64-x86_64-cc","cc:-arch x86_64 -O3 -DL_ENDIAN -DMD32_REG_T=int -Wall::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch x86_64 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
+"darwin64-x86_64-cc","cc:-arch x86_64 -O3 -DL_ENDIAN -DMD32_REG_T=int -Wall::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL:".eval{my $asm=$x86_64_asm;$asm=~s/rc4\-[^:]+//;$asm}.":macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch x86_64 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
 "debug-darwin-ppc-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DB_ENDIAN -g -Wall -O::-D_REENTRANT:MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${ppc32_asm}:osx32:dlfcn:darwin-shared:-fPIC:-dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
 
 ##### A/UX
@@ -583,6 +585,7 @@ my %table=(
 );
 
 my @MK1MF_Builds=qw(VC-WIN64I VC-WIN64A
+		    debug-VC-WIN64I debug-VC-WIN64A
 		    VC-NT VC-CE VC-WIN32 debug-VC-WIN32
 		    BC-32 
 		    netware-clib netware-clib-bsdsock
@@ -1093,6 +1096,12 @@ my $ar = $ENV{'AR'} || "ar";
 my $arflags = $fields[$idx_arflags];
 my $multilib = $fields[$idx_multilib];
 
+# if $prefix/lib$multilib is not an existing directory, then
+# assume that it's not searched by linker automatically, in
+# which case adding $multilib suffix causes more grief than
+# we're ready to tolerate, so don't...
+$multilib="" if !-d "$prefix/lib$multilib";
+
 $libdir="lib$multilib" if $libdir eq "";
 
 $cflags = "$cflags$exp_cflags";
@@ -1102,6 +1111,12 @@ my ($prelflags,$postlflags)=split('%',$lflags);
 if (defined($postlflags))	{ $lflags=$postlflags;	}
 else				{ $lflags=$prelflags; undef $prelflags;	}
 
+if ($target =~ /^mingw/ && `$cc --target-help 2>&1` !~ m/\-mno\-cygwin/m)
+	{
+	$cflags =~ s/\-mno\-cygwin\s*//;
+	$shared_ldflag =~ s/\-mno\-cygwin\s*//;
+	}
+
 my $no_shared_warn=0;
 my $no_user_cflags=0;
 

FAQ

@@ -52,6 +52,9 @@ OpenSSL  -  Frequently Asked Questions
 * Why does the OpenSSL test suite fail in sha512t on x86 CPU?
 * Why does compiler fail to compile sha512.c?
 * Test suite still fails, what to do?
+* I think I've found a bug, what should I do?
+* I'm SURE I've found a bug, how do I report it?
+* I've found a security issue, how do I report it?
 
 [PROG] Questions about programming with OpenSSL
 
@@ -79,7 +82,7 @@ OpenSSL  -  Frequently Asked Questions
 * Which is the current version of OpenSSL?
 
 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 1.0.0a was released on Jun 1st, 2010.
+OpenSSL 1.0.0f was released on Jan 4th, 2012.
 
 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -131,7 +134,7 @@ OpenSSL.  Information on the OpenSSL mailing lists is available from
 * Where can I get a compiled version of OpenSSL?
 
 You can finder pointers to binary distributions in
-http://www.openssl.org/related/binaries.html .
+<URL: http://www.openssl.org/related/binaries.html> .
 
 Some applications that use OpenSSL are distributed in binary form.
 When using such an application, you don't need to install OpenSSL
@@ -463,7 +466,7 @@ administrators.
 Other projects do have other policies so you can for example extract the CA
 bundle used by Mozilla and/or modssl as described in this article:
 
-  http://www.mail-archive.com/modssl-users@modssl.org/msg16980.html
+  <URL: http://www.mail-archive.com/modssl-users@modssl.org/msg16980.html>
 
 
 [BUILD] =======================================================================
@@ -505,7 +508,7 @@ when you run the test suite (using "make test").  The message returned is
 "bc: 1 not implemented".
 
 The best way to deal with this is to find another implementation of bc
-and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
+and compile/install it.  GNU bc (see <URL: http://www.gnu.org/software/software.html>
 for download instructions) can be safely used, for example.
 
 
@@ -516,7 +519,7 @@ that the OpenSSL bntest throws at it.  This gets triggered when you run the
 test suite (using "make test").  The message returned is "bc: stack empty".
 
 The best way to deal with this is to find another implementation of bc
-and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
+and compile/install it.  GNU bc (see <URL: http://www.gnu.org/software/software.html>
 for download instructions) can be safely used, for example.
 
 
@@ -709,6 +712,46 @@ never make sense, and tend to emerge when you least expect them. In order
 to identify one, drop optimization level, e.g. by editing CFLAG line in
 top-level Makefile, recompile and re-run the test.
 
+* I think I've found a bug, what should I do?
+
+If you are a new user then it is quite likely you haven't found a bug and
+something is happening you aren't familiar with. Check this FAQ, the associated
+documentation and the mailing lists for similar queries. If you are still
+unsure whether it is a bug or not submit a query to the openssl-users mailing
+list.
+
+
+* I'm SURE I've found a bug, how do I report it?
+
+Bug reports with no security implications should be sent to the request
+tracker. This can be done by mailing the report to <rt@openssl.org> (or its
+alias <openssl-bugs@openssl.org>), please note that messages sent to the
+request tracker also appear in the public openssl-dev mailing list.
+
+The report should be in plain text. Any patches should be sent as
+plain text attachments because some mailers corrupt patches sent inline.
+If your issue affects multiple versions of OpenSSL check any patches apply
+cleanly and, if possible include patches to each affected version.
+
+The report should be given a meaningful subject line briefly summarising the
+issue. Just "bug in OpenSSL" or "bug in OpenSSL 0.9.8n" is not very helpful.
+
+By sending reports to the request tracker the bug can then be given a priority
+and assigned to the appropriate maintainer. The history of discussions can be
+accessed and if the issue has been addressed or a reason why not. If patches
+are only sent to openssl-dev they can be mislaid if a team member has to
+wade through months of old messages to review the discussion.
+
+See also <URL: http://www.openssl.org/support/rt.html>
+
+
+* I've found a security issue, how do I report it?
+
+If you think your bug has security implications then please send it to
+openssl-security@openssl.org if you don't get a prompt reply at least 
+acknowledging receipt then resend or mail it directly to one of the
+more active team members (e.g. Steve).
+
 [PROG] ========================================================================
 
 * Is OpenSSL thread-safe?

INSTALL.VMS

@@ -71,7 +71,7 @@ the top to understand how to use them.  However, if you want to
 compile all you can get, the simplest is to use MAKEVMS.COM in the top
 directory.  The syntax is the following:
 
-  @MAKEVMS <option> <rsaref-p> <debug-p> [<compiler>]
+  @MAKEVMS <option> <bits> <debug-p> [<compiler>]
 
 <option> must be one of the following:
 
@@ -87,24 +87,11 @@ directory.  The syntax is the following:
       TEST      Just build the "[.xxx.EXE.TEST]" test programs for OpenSSL.
       APPS      Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL.
 
-<rsaref-p> must be one of the following:
+<bits> must be one of the following:
 
-      RSAREF    compile using the RSAREF Library
-      NORSAREF  compile without using RSAREF
-
-Note 0: The RSAREF library IS NO LONGER NEEDED.  The RSA patent
-        expires September 20, 2000, and RSA Security chose to make
-        the algorithm public domain two weeks before that.
-
-Note 1: If you still want to use RSAREF, the library is NOT INCLUDED
-        and you have to download it.  RSA Security doesn't carry it
-        any more, but there are a number of places where you can find
-        it.  You have to get the ".tar-Z" file as the ".zip" file
-        doesn't have the directory structure stored.  You have to
-        extract the file into the [.RSAREF] directory as that is where
-        the scripts will look for the files.
-
-Note 2: I have never done this, so I've no idea if it works or not.
+      ""        compile using default pointer size
+      32        compile using 32 bit pointer size
+      64        compile using 64 bit pointer size
 
 <debug-p> must be one of the following:
 
@@ -117,12 +104,13 @@ Note 2: I have never done this, so I've no idea if it works or not.
       GNUC      For GNU C.
 
 
-You will find the crypto library in [.xxx.EXE.CRYPTO], called LIBCRYPTO.OLB,
-where xxx is VAX or AXP.  You will find the SSL library in [.xxx.EXE.SSL],
-named LIBSSL.OLB, and you will find a bunch of useful programs in
-[.xxx.EXE.APPS].  However, these shouldn't be used right off unless it's
-just to test them.  For production use, make sure you install first, see
-Installation below.
+You will find the crypto library in [.xxx.EXE.CRYPTO] (where xxx is VAX,
+ALPHA or IA64), called SSL_LIBCRYPTO32.OLB or SSL_LIBCRYPTO.OLB depending
+on how it was built.  You will find the SSL library in [.xxx.EXE.SSL],
+named SSL_LIBSSL32.OLB or SSL_LIBSSL.OLB, and you will find a bunch of
+useful programs in [.xxx.EXE.APPS].  However, these shouldn't be used
+right off unless it's just to test them.  For production use, make sure
+you install first, see Installation below.
 
 Note 1: Some programs in this package require a TCP/IP library.
 
@@ -170,12 +158,14 @@ Installation:
 
 Installation is easy, just do the following:
 
-  @INSTALL <root>
+  @INSTALL <root> <bits>
 
 <root> is the directory in which everything will be installed,
 subdirectories, libraries, header files, programs and startup command
 procedures.
 
+<bits> works the same way as for MAKEVMS.COM
+
 N.B.: INSTALL.COM builds a new directory structure, different from
 the directory tree where you have now build OpenSSL.
 
@@ -196,6 +186,10 @@ following command procedures:
         sets up the symbols to the applications.  Should be called
         from for example SYS$MANAGER:SYLOGIN.COM 
 
+  OPENSSL_UNDO.COM
+
+	deassigns the logical names created with OPENSSL_STARTUP.COM.
+
 The logical names that are set up are the following:
 
   SSLROOT       a dotted concealed logical name pointing at the
@@ -203,7 +197,6 @@ The logical names that are set up are the following:
 
   SSLCERTS      Initially an empty directory, this is the default
 		location for certificate files.
-  SSLMISC	Various scripts.
   SSLPRIVATE	Initially an empty directory, this is the default
 		location for private key files.
 
@@ -211,8 +204,9 @@ The logical names that are set up are the following:
 		programs.
   SSLINCLUDE    Contains the header files needed if you want to
 		compile programs with libcrypto or libssl.
-  SSLLIB        Contains the OpenSSL library files (LIBCRYPTO.OLB
-		and LIBSSL.OLB) themselves.
+  SSLLIB        Contains the OpenSSL library files themselves:
+  		- SSL_LIBCRYPTO32.OLB and SSL_LIBSSL32.OLB or
+		- SSL_LIBCRYPTO.OLB and SSL_LIBSSL.OLB
 
   OPENSSL	Same as SSLINCLUDE.  This is because the standard
 		way to include OpenSSL header files from version
@@ -296,4 +290,4 @@ have any ideas.
 
 --
 Richard Levitte <richard@levitte.org>
-2000-02-27
+2000-02-27, 2011-03-18

INSTALL.W32

@@ -185,6 +185,15 @@
    required. Run the installers and do whatever magic they say it takes
    to start MSYS bash shell with GNU tools on its PATH.
 
+   N.B. Since source tar-ball can contain symbolic links, it's essential
+   that you use accompanying MSYS tar to unpack the source. It will
+   either handle them in one way or another or fail to extract them,
+   which does the trick too. Latter means that you may safely ignore all
+   "cannot create symlink" messages, as they will be "re-created" at
+   configure stage by copying corresponding files. Alternative programs
+   were observed to create empty files instead, which results in build
+   failure.
+
  * Compile OpenSSL:
 
    $ ./config
@@ -297,7 +306,18 @@
  desktop, which is not available to service processes. The toolkit is
  designed to detect in which context it's currently executed, GUI,
  console app or service, and act accordingly, namely whether or not to
- actually make GUI calls.
+ actually make GUI calls. Additionally those who wish to
+ /DELAYLOAD:GDI32.DLL and /DELAYLOAD:USER32.DLL and actually keep them
+ off service process should consider implementing and exporting from
+ .exe image in question own _OPENSSL_isservice not relying on USER32.DLL.
+ E.g., on Windows Vista and later you could:
+
+	__declspec(dllexport) __cdecl BOOL _OPENSSL_isservice(void)
+	{   DWORD sess;
+	    if (ProcessIdToSessionId(GetCurrentProcessId(),&sess))
+	        return sess==0;
+	    return FALSE;
+	}
 
  If you link with OpenSSL .DLLs, then you're expected to include into
  your application code small "shim" snippet, which provides glue between

LICENSE

@@ -12,7 +12,7 @@
   ---------------
 
 /* ====================================================================
- * Copyright (c) 1998-2008 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2011 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions

Makefile.shared

@@ -135,7 +135,7 @@ LINK_SO_A_VIA_O=	\
   ALL=$$ALLSYMSFLAGS; ALLSYMSFLAGS=; NOALLSYMSFLAGS=; \
   ( $(SET_X); \
     ld $(LDFLAGS) -r -o lib$(LIBNAME).o $$ALL lib$(LIBNAME).a $(LIBEXTRAS) ); \
-  $(LINK_SO) && rm -f $(LIBNAME).o
+  $(LINK_SO) && rm -f lib$(LIBNAME).o
 
 LINK_SO_A_UNPACKED=	\
   UNPACKDIR=link_tmp.$$$$; rm -rf $$UNPACKDIR; mkdir $$UNPACKDIR; \
@@ -207,17 +207,29 @@ link_app.bsd:
 	fi; $(LINK_APP)
 
 # For Darwin AKA Mac OS/X (dyld)
-# link_o.darwin produces .so, because we let it use dso_dlfcn module,
-# which has .so extension hard-coded. One can argue that one should
-# develop special dso module for MacOS X. At least manual encourages
-# to use native NSModule(3) API and refers to dlfcn as termporary hack.
+# Originally link_o.darwin produced .so, because it was hard-coded
+# in dso_dlfcn module. At later point dso_dlfcn switched to .dylib
+# extension in order to allow for run-time linking with vendor-
+# supplied shared libraries such as libz, so that link_o.darwin had
+# to be harmonized with it. This caused minor controversy, because
+# it was believed that dlopen can't be used to dynamically load
+# .dylib-s, only so called bundle modules (ones linked with -bundle
+# flag). The belief seems to be originating from pre-10.4 release,
+# where dlfcn functionality was emulated by dlcompat add-on. In
+# 10.4 dlopen was rewritten as native part of dyld and is documented
+# to be capable of loading both dynamic libraries and bundles. In
+# order to provide compatibility with pre-10.4 dlopen, modules are
+# linked with -bundle flag, which makes .dylib extension misleading.
+# It works, because dlopen is [and always was] extension-agnostic.
+# Alternative to this heuristic approach is to develop specific
+# MacOS X dso module relying on whichever "native" dyld interface.
 link_o.darwin:
 	@ $(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME); \
-	SHLIB_SUFFIX=.so; \
+	SHLIB_SUFFIX=.dylib; \
 	ALLSYMSFLAGS='-all_load'; \
 	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS)"; \
+	SHAREDFLAGS="$(CFLAGS) `echo $(SHARED_LDFLAGS) | sed s/dynamiclib/bundle/`"; \
 	if [ -n "$(LIBVERSION)" ]; then \
 		SHAREDFLAGS="$$SHAREDFLAGS -current_version $(LIBVERSION)"; \
 	fi; \

NEWS

@@ -5,12 +5,46 @@
   This file gives a brief overview of the major changes between each OpenSSL
   release. For more details please read the CHANGES file.
 
+  Major changes between OpenSSL 1.0.0e and OpenSSL 1.0.0f:
+
+      o Fix for DTLS plaintext recovery attack CVE-2011-4108
+      o Clear block padding bytes of SSL 3.0 records CVE-2011-4576
+      o Only allow one SGC handshake restart for SSL/TLS CVE-2011-4619
+      o Check parameters are not NULL in GOST ENGINE CVE-2012-0027
+      o Check for malformed RFC3779 data CVE-2011-4577
+
+  Major changes between OpenSSL 1.0.0d and OpenSSL 1.0.0e:
+
+      o Fix for CRL vulnerability issue CVE-2011-3207
+      o Fix for ECDH crashes CVE-2011-3210
+      o Protection against EC timing attacks.
+      o Support ECDH ciphersuites for certificates using SHA2 algorithms.
+      o Various DTLS fixes.
+
+  Major changes between OpenSSL 1.0.0c and OpenSSL 1.0.0d:
+
+      o Fix for security issue CVE-2011-0014
+
+  Major changes between OpenSSL 1.0.0b and OpenSSL 1.0.0c:
+
+      o Fix for security issue CVE-2010-4180
+      o Fix for CVE-2010-4252
+      o Fix mishandling of absent EC point format extension.
+      o Fix various platform compilation issues.
+      o Corrected fix for security issue CVE-2010-3864.
+
+  Major changes between OpenSSL 1.0.0a and OpenSSL 1.0.0b:
+
+      o Fix for security issue CVE-2010-3864.
+      o Fix for CVE-2010-2939
+      o Fix WIN32 build system for GOST ENGINE.
+
   Major changes between OpenSSL 1.0.0 and OpenSSL 1.0.0a:
 
       o Fix for security issue CVE-2010-1633.
       o GOST MAC and CFB fixes.
 
-  Major changes between OpenSSL 0.9.8n and OpenSSL 1.0:
+  Major changes between OpenSSL 0.9.8n and OpenSSL 1.0.0:
 
       o RFC3280 path validation: sufficient to process PKITS tests.
       o Integrated support for PVK files and keyblobs.
@@ -33,6 +67,19 @@
       o Opaque PRF Input TLS extension support.
       o Updated time routines to avoid OS limitations.
 
+  Major changes between OpenSSL 0.9.8q and OpenSSL 0.9.8r:
+
+      o Fix for security issue CVE-2011-0014
+
+  Major changes between OpenSSL 0.9.8p and OpenSSL 0.9.8q:
+
+      o Fix for security issue CVE-2010-4180
+      o Fix for CVE-2010-4252
+
+  Major changes between OpenSSL 0.9.8o and OpenSSL 0.9.8p:
+
+      o Fix for security issue CVE-2010-3864.
+
   Major changes between OpenSSL 0.9.8n and OpenSSL 0.9.8o:
 
       o Fix for security issue CVE-2010-0742.

PROBLEMS

@@ -36,7 +36,9 @@ may differ on your machine.
 
 
 As long as Apple doesn't fix the problem with ld, this problem building
-OpenSSL will remain as is.
+OpenSSL will remain as is. Well, the problem was addressed in 0.9.8f by
+passing -Wl,-search_paths_first, but it's unknown if the flag was
+supported from the initial MacOS X release.
 
 
 * Parallell make leads to errors

README

@@ -1,7 +1,7 @@
 
- OpenSSL 1.0.0b-dev
+ OpenSSL 1.0.0f 4 Jan 2012
 
- Copyright (c) 1998-2010 The OpenSSL Project
+ Copyright (c) 1998-2011 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
  All rights reserved.
 

STATUS

@@ -1,12 +1,22 @@
 
   OpenSSL STATUS                           Last modified at
-  ______________                           $Date: 2010/06/01 13:31:36 $
+  ______________                           $Date: 2012/01/04 17:01:30 $
 
   DEVELOPMENT STATE
 
     o  OpenSSL 1.1.0:  Under development...
+    o  OpenSSL 1.0.1:  Under development...
+    o  OpenSSL 1.0.0f: Released on January    4th, 2012
+    o  OpenSSL 1.0.0e: Released on September  6th, 2011
+    o  OpenSSL 1.0.0d: Released on February   8nd, 2011
+    o  OpenSSL 1.0.0c: Released on December   2nd, 2010
+    o  OpenSSL 1.0.0b: Released on November  16th, 2010
     o  OpenSSL 1.0.0a: Released on June      1st,  2010
     o  OpenSSL 1.0.0:  Released on March     29th, 2010
+    o  OpenSSL 0.9.8r: Released on February   8nd, 2011
+    o  OpenSSL 0.9.8q: Released on December   2nd, 2010
+    o  OpenSSL 0.9.8p: Released on November  16th, 2010
+    o  OpenSSL 0.9.8o: Released on June       1st, 2010
     o  OpenSSL 0.9.8n: Released on March     24th, 2010
     o  OpenSSL 0.9.8m: Released on February  25th, 2010
     o  OpenSSL 0.9.8l: Released on November   5th, 2009

TABLE

@@ -1287,7 +1287,7 @@ $bf_obj       =
 $md5_obj      = md5-x86_64.o
 $sha1_obj     = sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o
 $cast_obj     = 
-$rc4_obj      = rc4-x86_64.o
+$rc4_obj      = 
 $rmd160_obj   = 
 $rc5_obj      = 
 $wp_obj       = wp-x86_64.o
@@ -1426,6 +1426,68 @@ $ranlib       =
 $arflags      = 
 $multilib     = 
 
+*** debug-VC-WIN64A
+$cc           = cl
+$cflags       = -W3 -Gs0 -Gy -Zi -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE
+$unistd       = 
+$thread_cflag = 
+$sys_id       = WIN64A
+$lflags       = 
+$bn_ops       = SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN
+$cpuid_obj    = x86_64cpuid.o
+$bn_obj       = bn_asm.o x86_64-mont.o
+$des_obj      = 
+$aes_obj      = aes-x86_64.o
+$bf_obj       = 
+$md5_obj      = md5-x86_64.o
+$sha1_obj     = sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o
+$cast_obj     = 
+$rc4_obj      = rc4-x86_64.o
+$rmd160_obj   = 
+$rc5_obj      = 
+$wp_obj       = wp-x86_64.o
+$cmll_obj     = cmll-x86_64.o cmll_misc.o
+$perlasm_scheme = auto
+$dso_scheme   = win32
+$shared_target= 
+$shared_cflag = 
+$shared_ldflag = 
+$shared_extension = 
+$ranlib       = 
+$arflags      = 
+$multilib     = 
+
+*** debug-VC-WIN64I
+$cc           = cl
+$cflags       = -W3 -Gs0 -Gy -Zi -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE
+$unistd       = 
+$thread_cflag = 
+$sys_id       = WIN64I
+$lflags       = 
+$bn_ops       = SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN
+$cpuid_obj    = ia64cpuid.o
+$bn_obj       = ia64.o
+$des_obj      = 
+$aes_obj      = aes_core.o aes_cbc.o aes-ia64.o
+$bf_obj       = 
+$md5_obj      = md5-ia64.o
+$sha1_obj     = sha1-ia64.o sha256-ia64.o sha512-ia64.o
+$cast_obj     = 
+$rc4_obj      = 
+$rmd160_obj   = 
+$rc5_obj      = 
+$wp_obj       = 
+$cmll_obj     = 
+$perlasm_scheme = ias
+$dso_scheme   = win32
+$shared_target= 
+$shared_cflag = 
+$shared_ldflag = 
+$shared_extension = 
+$ranlib       = 
+$arflags      = 
+$multilib     = 
+
 *** debug-ben
 $cc           = gcc
 $cflags       = -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DDEBUG_UNUSED -O2 -pedantic -Wall -Wshadow -Werror -pipe
@@ -2420,7 +2482,7 @@ $multilib     =
 
 *** debug-vos-gcc
 $cc           = gcc
-$cflags       = -O0 -g -Wall -D_POSIX_C_SOURCE=200112L -D_BSD -D_VOS_EXTENDED_NAMES -DB_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG
+$cflags       = -O0 -g -Wall -DOPENSSL_SYSNAME_VOS -D_POSIX_C_SOURCE=200112L -D_BSD -D_VOS_EXTENDED_NAMES -DB_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG
 $unistd       = 
 $thread_cflag = (unknown)
 $sys_id       = VOS
@@ -5241,7 +5303,7 @@ $multilib     =
 
 *** vos-gcc
 $cc           = gcc
-$cflags       = -O3 -Wall -D_POSIX_C_SOURCE=200112L -D_BSD -D_VOS_EXTENDED_NAMES -DB_ENDIAN
+$cflags       = -O3 -Wall -DOPENSSL_SYSNAME_VOS -D_POSIX_C_SOURCE=200112L -D_BSD -D_VOS_EXTENDED_NAMES -DB_ENDIAN
 $unistd       = 
 $thread_cflag = (unknown)
 $sys_id       = VOS

VMS/install-vms.com

@@ -0,0 +1,67 @@
+$! install-vms.com -- Installs the files in a given directory tree
+$!
+$! Author: Richard Levitte <richard@levitte.org>
+$! Time of creation: 23-MAY-1998 19:22
+$!
+$! P1	root of the directory tree
+$!
+$!
+$! Announce/identify.
+$!
+$ proc = f$environment( "procedure")
+$ write sys$output "@@@ "+ -
+   f$parse( proc, , , "name")+ f$parse( proc, , , "type")
+$!
+$ on error then goto tidy
+$ on control_c then goto tidy
+$!
+$ if p1 .eqs. ""
+$ then
+$   write sys$output "First argument missing."
+$   write sys$output -
+     "Should be the directory where you want things installed."
+$   exit
+$ endif
+$
+$ if (f$getsyi( "cpu") .lt. 128)
+$ then
+$   arch = "VAX"
+$ else
+$   arch = f$edit( f$getsyi( "arch_name"), "upcase")
+$   if (arch .eqs. "") then arch = "UNK"
+$ endif
+$
+$ root = f$parse( P1, "[]A.;0", , , "SYNTAX_ONLY, NO_CONCEAL")- "A.;0"
+$ root_dev = f$parse( root, , , "device", "syntax_only")
+$ root_dir = f$parse( root, , , "directory", "syntax_only") - -
+   "[000000." - "][" - "[" - "]"
+$ root = root_dev + "[" + root_dir
+$
+$ define /nolog wrk_sslroot 'root'.] /translation_attributes = concealed
+$ define /nolog wrk_sslinclude wrk_sslroot:[include]
+$
+$ if f$parse( "wrk_sslroot:[000000]") .eqs. "" then -
+   create /directory /log wrk_sslroot:[000000]
+$ if f$parse( "wrk_sslinclude:") .eqs. "" then -
+   create /directory /log wrk_sslinclude:
+$ if f$parse( "wrk_sslroot:[vms]") .eqs. "" then -
+   create /directory /log wrk_sslroot:[vms]
+$!
+$ copy /log /protection = world:re openssl_startup.com wrk_sslroot:[vms]
+$ copy /log /protection = world:re openssl_undo.com wrk_sslroot:[vms]
+$ copy /log /protection = world:re openssl_utils.com wrk_sslroot:[vms]
+$!
+$ tidy:
+$!
+$ call deass wrk_sslroot
+$ call deass wrk_sslinclude
+$!
+$ exit
+$!
+$ deass: subroutine
+$ if (f$trnlnm( p1, "LNM$PROCESS") .nes. "")
+$ then
+$   deassign /process 'p1'
+$ endif
+$ endsubroutine
+$!

VMS/install.com

@@ -1,79 +0,0 @@
-$! INSTALL.COM -- Installs the files in a given directory tree
-$!
-$! Author: Richard Levitte <richard@levitte.org>
-$! Time of creation: 23-MAY-1998 19:22
-$!
-$! P1	root of the directory tree
-$!
-$	IF P1 .EQS. ""
-$	THEN
-$	    WRITE SYS$OUTPUT "First argument missing."
-$	    WRITE SYS$OUTPUT "Should be the directory where you want things installed."
-$	    EXIT
-$	ENDIF
-$
-$	IF (F$GETSYI("CPU").LT.128)
-$	THEN
-$	    ARCH := VAX
-$	ELSE
-$	    ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
-$	    IF (ARCH .EQS. "") THEN ARCH = "UNK"
-$	ENDIF
-$
-$	ROOT = F$PARSE(P1,"[]A.;0",,,"SYNTAX_ONLY,NO_CONCEAL") - "A.;0"
-$	ROOT_DEV = F$PARSE(ROOT,,,"DEVICE","SYNTAX_ONLY")
-$	ROOT_DIR = F$PARSE(ROOT,,,"DIRECTORY","SYNTAX_ONLY") -
-		   - "[000000." - "][" - "[" - "]"
-$	ROOT = ROOT_DEV + "[" + ROOT_DIR
-$
-$	DEFINE/NOLOG WRK_SSLROOT 'ROOT'.] /TRANS=CONC
-$	DEFINE/NOLOG WRK_SSLINCLUDE WRK_SSLROOT:[INCLUDE]
-$
-$	IF F$PARSE("WRK_SSLROOT:[000000]") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLROOT:[000000]
-$	IF F$PARSE("WRK_SSLINCLUDE:") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLINCLUDE:
-$	IF F$PARSE("WRK_SSLROOT:[VMS]") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLROOT:[VMS]
-$
-$	IF F$SEARCH("WRK_SSLINCLUDE:vms_idhacks.h") .NES. "" THEN -
-	   DELETE WRK_SSLINCLUDE:vms_idhacks.h;*
-$
-$	OPEN/WRITE SF WRK_SSLROOT:[VMS]OPENSSL_STARTUP.COM
-$	WRITE SYS$OUTPUT "%OPEN-I-CREATED,  ",F$SEARCH("WRK_SSLROOT:[VMS]OPENSSL_STARTUP.COM")," created."
-$	WRITE SF "$! Startup file for Openssl"
-$	WRITE SF "$!"
-$	WRITE SF "$! Do not edit this file, as it will be regenerated during next installation."
-$	WRITE SF "$! Instead, add or change SSLROOT:[VMS]OPENSSL_SYSTARTUP.COM"
-$	WRITE SF "$!"
-$	WRITE SF "$! P1	a qualifier to DEFINE.  For example ""/SYSTEM"" to get the logical names"
-$	WRITE SF "$!	defined in the system logical name table."
-$	WRITE SF "$!"
-$	WRITE SF "$	IF (F$GETSYI(""CPU"").LT.128)"
-$	WRITE SF "$	THEN"
-$	WRITE SF "$	    ARCH := VAX"
-$	WRITE SF "$	ELSE"
-$	WRITE SF "$	    ARCH = F$EDIT( F$GETSYI( ""ARCH_NAME""), ""UPCASE"")"
-$	WRITE SF "$	    IF (ARCH .EQS. """") THEN ARCH = ""UNK"""
-$	WRITE SF "$	ENDIF"
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLROOT		",ROOT,".] /TRANS=CONC"
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLLIB		SSLROOT:['ARCH'_LIB]"
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLINCLUDE	SSLROOT:[INCLUDE]"
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLEXE		SSLROOT:['ARCH'_EXE]"
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLCERTS	SSLROOT:[CERTS]"
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLPRIVATE	SSLROOT:[PRIVATE]"
-$	WRITE SF "$"
-$	WRITE SF "$!	This is program can include <openssl/{foo}.h>"
-$	WRITE SF "$	DEFINE/NOLOG'P1	OPENSSL		SSLINCLUDE:"
-$	WRITE SF "$"
-$	WRITE SF "$	IF F$SEARCH(""SSLROOT:[VMS]OPENSSL_SYSTARTUP.COM"") .NES."""" THEN -"
-$	WRITE SF "	   @SSLROOT:[VMS]OPENSSL_SYSTARTUP.COM"
-$	WRITE SF "$"
-$	WRITE SF "$	EXIT"
-$	CLOSE SF
-$	SET FILE/PROT=WORLD:RE WRK_SSLROOT:[VMS]OPENSSL_STARTUP.COM
-$
-$	COPY OPENSSL_UTILS.COM WRK_SSLROOT:[VMS]/LOG
-$	SET FILE/PROT=WORLD:RE WRK_SSLROOT:[VMS]OPENSSL_UTILS.COM
-$
-$	EXIT

VMS/mkshared.com

@@ -1,85 +1,166 @@
-$! MKSHARED.COM -- script to created shareable images on VMS
+$! MKSHARED.COM -- Create shareable images.
 $!
-$! No command line parameters.  This should be run at the start of the source
-$! tree (the same directory where one finds INSTALL.VMS).
+$! P1: "64" for 64-bit pointers.
 $!
-$! Input:	[.UTIL]LIBEAY.NUM,[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB
-$!		[.UTIL]SSLEAY.NUM,[.xxx.EXE.SSL]LIBSSL.OLB
-$! Output:	[.xxx.EXE.CRYPTO]LIBCRYPTO.OPT,.MAP,.EXE
-$!		[.xxx.EXE.SSL]LIBSSL.OPT,.MAP,.EXE
+$! P2: Zlib object library path (optional).
+$!
+$! Input:	[.UTIL]LIBEAY.NUM,[.xxx.EXE.CRYPTO]SSL_LIBCRYPTO[32].OLB
+$!		[.UTIL]SSLEAY.NUM,[.xxx.EXE.SSL]SSL_LIBSSL[32].OLB
+$!		[.CRYPTO.xxx]OPENSSLCONF.H
+$! Output:	[.xxx.EXE.CRYPTO]SSL_LIBCRYPTO_SHR[32].OPT,.MAP,.EXE
+$!		[.xxx.EXE.SSL]SSL_LIBSSL_SRH[32].OPT,.MAP,.EXE
 $!
 $! So far, tests have only been made on VMS for Alpha.  VAX will come in time.
 $! ===========================================================================
-$
+$!
+$! Announce/identify.
+$!
+$ proc = f$environment( "procedure")
+$ write sys$output "@@@ "+ -
+   f$parse( proc, , , "name")+ f$parse( proc, , , "type")
+$!
+$! Save the original default device:[directory].
+$!
+$ def_orig = f$environment( "default")
+$ on error then goto tidy
+$ on control_c then goto tidy
+$!
+$! SET DEFAULT to the main kit directory.
+$!
+$ proc = f$environment("procedure")
+$ proc = f$parse( "A.;", proc)- "A.;"
+$ set default 'proc'
+$ set default [-]
+$!
 $! ----- Prepare info for processing: version number and file info
 $ gosub read_version_info
 $ if libver .eqs. ""
 $ then
 $   write sys$error "ERROR: Couldn't find any library version info..."
-$   exit
+$   go to tidy:
 $ endif
 $
-$ if (f$getsyi("cpu").lt.128)
+$ if (f$getsyi("cpu") .lt. 128)
 $ then
-$     arch := VAX
-$ else
-$     arch = f$edit( f$getsyi( "ARCH_NAME"), "UPCASE")
-$     if (arch .eqs. "") then arch = "UNK"
-$ endif
-$
-$ if arch .nes. "VAX"
-$ then
-$   arch_vax = 0
-$   libid  = "Crypto"
-$   libnum = "[.UTIL]LIBEAY.NUM"
-$   libdir = "[.''ARCH'.EXE.CRYPTO]"
-$   libolb = "''libdir'LIBCRYPTO.OLB"
-$   libopt = "''libdir'LIBCRYPTO.OPT"
-$   libmap = "''libdir'LIBCRYPTO.MAP"
-$   libgoal= "''libdir'LIBCRYPTO.EXE"
-$   libref = ""
-$   gosub create_nonvax_shr
-$   libid  = "SSL"
-$   libnum = "[.UTIL]SSLEAY.NUM"
-$   libdir = "[.''ARCH'.EXE.SSL]"
-$   libolb = "''libdir'LIBSSL.OLB"
-$   libopt = "''libdir'LIBSSL.OPT"
-$   libmap = "''libdir'LIBSSL.MAP"
-$   libgoal= "''libdir'LIBSSL.EXE"
-$   libref = "[.''ARCH'.EXE.CRYPTO]LIBCRYPTO.EXE"
-$   gosub create_nonvax_shr
-$ else
 $   arch_vax = 1
+$   arch = "VAX"
+$ else
+$   arch_vax = 0
+$   arch = f$edit( f$getsyi( "ARCH_NAME"), "UPCASE")
+$   if (arch .eqs. "") then arch = "UNK"
+$ endif
+$!
+$ archd = arch
+$ lib32 = "32"
+$ shr = "SHR32"
+$!
+$ if (p1 .nes. "")
+$ then
+$   if (p1 .eqs. "64")
+$   then
+$     archd = arch+ "_64"
+$     lib32 = ""
+$     shr = "SHR"
+$   else
+$     if (p1 .nes. "32")
+$     then
+$       write sys$output "Second argument invalid."
+$       write sys$output "It should be "32", "64", or nothing."
+$       exit
+$     endif
+$   endif
+$ endif
+$!
+$! ----- Prepare info for processing: disabled algorithms info
+$ gosub read_disabled_algorithms_info
+$!
+$ ZLIB = p2
+$ zlib_lib = ""
+$ if (ZLIB .nes. "")
+$ then
+$   file2 = f$parse( ZLIB, "libz.olb", , , "syntax_only")
+$   if (f$search( file2) .eqs. "")
+$   then
+$     write sys$output ""
+$     write sys$output "The Option ", ZLIB, " Is Invalid."
+$     write sys$output "    Can't find library: ''file2'"
+$     write sys$output ""
+$     goto tidy
+$   endif
+$   zlib_lib = ", ''file2' /library"
+$ endif
+$!
+$ if (arch_vax)
+$ then
 $   libtit = "CRYPTO_TRANSFER_VECTOR"
 $   libid  = "Crypto"
 $   libnum = "[.UTIL]LIBEAY.NUM"
-$   libdir = "[.''ARCH'.EXE.CRYPTO]"
-$   libmar = "''libdir'LIBCRYPTO.MAR"
-$   libolb = "''libdir'LIBCRYPTO.OLB"
-$   libopt = "''libdir'LIBCRYPTO.OPT"
-$   libobj = "''libdir'LIBCRYPTO.OBJ"
-$   libmap = "''libdir'LIBCRYPTO.MAP"
-$   libgoal= "''libdir'LIBCRYPTO.EXE"
+$   libdir = "[.''ARCHD'.EXE.CRYPTO]"
+$   libmar = "''libdir'SSL_LIBCRYPTO_''shr'.MAR"
+$   libolb = "''libdir'SSL_LIBCRYPTO''lib32'.OLB"
+$   libopt = "''libdir'SSL_LIBCRYPTO_''shr'.OPT"
+$   libobj = "''libdir'SSL_LIBCRYPTO_''shr'.OBJ"
+$   libmap = "''libdir'SSL_LIBCRYPTO_''shr'.MAP"
+$   libgoal= "''libdir'SSL_LIBCRYPTO_''shr'.EXE"
 $   libref = ""
 $   libvec = "LIBCRYPTO"
-$   gosub create_vax_shr
+$   if f$search( libolb) .nes. "" then gosub create_vax_shr
 $   libtit = "SSL_TRANSFER_VECTOR"
 $   libid  = "SSL"
 $   libnum = "[.UTIL]SSLEAY.NUM"
-$   libdir = "[.''ARCH'.EXE.SSL]"
-$   libmar = "''libdir'LIBSSL.MAR"
-$   libolb = "''libdir'LIBSSL.OLB"
-$   libopt = "''libdir'LIBSSL.OPT"
-$   libobj = "''libdir'LIBSSL.OBJ"
-$   libmap = "''libdir'LIBSSL.MAP"
-$   libgoal= "''libdir'LIBSSL.EXE"
-$   libref = "[.''ARCH'.EXE.CRYPTO]LIBCRYPTO.EXE"
+$   libdir = "[.''ARCHD'.EXE.SSL]"
+$   libmar = "''libdir'SSL_LIBSSL_''shr'.MAR"
+$   libolb = "''libdir'SSL_LIBSSL''lib32'.OLB"
+$   libopt = "''libdir'SSL_LIBSSL_''shr'.OPT"
+$   libobj = "''libdir'SSL_LIBSSL_''shr'.OBJ"
+$   libmap = "''libdir'SSL_LIBSSL_''shr'.MAP"
+$   libgoal= "''libdir'SSL_LIBSSL_''shr'.EXE"
+$   libref = "[.''ARCHD'.EXE.CRYPTO]SSL_LIBCRYPTO_''shr'.EXE"
 $   libvec = "LIBSSL"
-$   gosub create_vax_shr
+$   if f$search( libolb) .nes. "" then gosub create_vax_shr
+$ else
+$   libid  = "Crypto"
+$   libnum = "[.UTIL]LIBEAY.NUM"
+$   libdir = "[.''ARCHD'.EXE.CRYPTO]"
+$   libolb = "''libdir'SSL_LIBCRYPTO''lib32'.OLB"
+$   libopt = "''libdir'SSL_LIBCRYPTO_''shr'.OPT"
+$   libmap = "''libdir'SSL_LIBCRYPTO_''shr'.MAP"
+$   libgoal= "''libdir'SSL_LIBCRYPTO_''shr'.EXE"
+$   libref = ""
+$   if f$search( libolb) .nes. "" then gosub create_nonvax_shr
+$   libid  = "SSL"
+$   libnum = "[.UTIL]SSLEAY.NUM"
+$   libdir = "[.''ARCHD'.EXE.SSL]"
+$   libolb = "''libdir'SSL_LIBSSL''lib32'.OLB"
+$   libopt = "''libdir'SSL_LIBSSL_''shr'.OPT"
+$   libmap = "''libdir'SSL_LIBSSL_''shr'.MAP"
+$   libgoal= "''libdir'SSL_LIBSSL_''shr'.EXE"
+$   libref = "[.''ARCHD'.EXE.CRYPTO]SSL_LIBCRYPTO_''shr'.EXE"
+$   if f$search( libolb) .nes. "" then gosub create_nonvax_shr
 $ endif
+$!
+$ tidy:
+$!
+$! Close any open files.
+$!
+$ if (f$trnlnm( "libnum", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
+   close libnum
+$!
+$ if (f$trnlnm( "mar", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
+   close mar
+$!
+$ if (f$trnlnm( "opt", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
+   close opt
+$!
+$ if (f$trnlnm( "vf", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
+   close vf
+$!
+$! Restore the original default device:[directory].
+$!
+$ set default 'def_orig'
 $ exit
 $
-$! ----- Soubroutines to build the shareable libraries
+$! ----- Subroutines to build the shareable libraries
 $! For each supported architecture, there's a main shareable library
 $! creator, which is called from the main code above.
 $! The creator will define a number of variables to tell the next levels of
@@ -111,9 +192,9 @@ $! ----- Subroutines for non-VAX
 $! -----
 $! The creator routine
 $ create_nonvax_shr:
-$   open/write opt 'libopt'
+$   open /write opt 'libopt'
 $   write opt "identification=""",libid," ",libverstr,""""
-$   write opt libolb,"/lib"
+$   write opt libolb, " /library"
 $   if libref .nes. "" then write opt libref,"/SHARE"
 $   write opt "SYMBOL_VECTOR=(-"
 $   libfirstentry := true
@@ -124,7 +205,8 @@ $   gosub read_func_num
 $   write opt ")"
 $   write opt "GSMATCH=",libvmatch,",",libver
 $   close opt
-$   link/map='libmap'/full/share='libgoal' 'libopt'/option
+$   link /map = 'libmap' /full /share = 'libgoal' 'libopt' /options -
+     'zlib_lib'
 $   return
 $
 $! The record writer routine
@@ -158,7 +240,7 @@ $! ----- Subroutines for VAX
 $! -----
 $! The creator routine
 $ create_vax_shr:
-$   open/write mar 'libmar'
+$   open /write mar 'libmar'
 $   type sys$input:/out=mar:
 ;
 ; Transfer vector for VAX shareable image
@@ -193,10 +275,10 @@ $!   libwriter := write_vax_vtransfer_entry
 $!   gosub read_func_num
 $   write mar "	.END"
 $   close mar
-$   open/write opt 'libopt'
+$   open /write opt 'libopt'
 $   write opt "identification=""",libid," ",libverstr,""""
 $   write opt libobj
-$   write opt libolb,"/lib"
+$   write opt libolb, " /library"
 $   if libref .nes. "" then write opt libref,"/SHARE"
 $   type sys$input:/out=opt:
 !
@@ -215,7 +297,8 @@ $   libwriter := write_vax_psect_attr
 $   gosub read_func_num
 $   close opt
 $   macro/obj='libobj' 'libmar'
-$   link/map='libmap'/full/share='libgoal' 'libopt'/option
+$   link /map = 'libmap' /full /share = 'libgoal' 'libopt' /options -
+     'zlib_lib'
 $   return
 $
 $! The record writer routine for VAX functions
@@ -237,9 +320,9 @@ $   return
 $
 $! ----- Common subroutines
 $! -----
-$! The .num file reader.  This one has great responsability.
+$! The .num file reader.  This one has great responsibility.
 $ read_func_num:
-$   open libnum 'libnum'
+$   open /read libnum 'libnum'
 $   goto read_nums
 $
 $ read_nums:
@@ -247,27 +330,30 @@ $   libentrynum=0
 $   liblastentry:=false
 $   entrycount=0
 $   loop:
-$     read/end=loop_end/err=loop_end libnum line
-$     entrynum=f$int(f$element(1," ",f$edit(line,"COMPRESS,TRIM")))
-$     entryinfo=f$element(2," ",f$edit(line,"COMPRESS,TRIM"))
-$     curentry=f$element(0," ",f$edit(line,"COMPRESS,TRIM"))
-$     info_exist=f$element(0,":",entryinfo)
-$     info_platforms=","+f$element(1,":",entryinfo)+","
-$     info_kind=f$element(2,":",entryinfo)
-$     info_algorithms=","+f$element(3,":",entryinfo)+","
+$     read /end=loop_end /err=loop_end libnum line
+$     lin = f$edit( line, "COMPRESS,TRIM")
+$!    Skip a "#" comment line.
+$     if (f$extract( 0, 1, lin) .eqs. "#") then goto loop
+$     entrynum = f$int(f$element( 1, " ", lin))
+$     entryinfo = f$element( 2, " ", lin)
+$     curentry = f$element( 0, " ", lin)
+$     info_exist = f$element( 0, ":", entryinfo)
+$     info_platforms = ","+ f$element(1, ":", entryinfo)+ ","
+$     info_kind = f$element( 2, ":", entryinfo)
+$     info_algorithms = ","+ f$element( 3, ":", entryinfo)+ ","
 $     if info_exist .eqs. "NOEXIST" then goto loop
 $     truesum = 0
 $     falsesum = 0
 $     negatives = 1
 $     plat_i = 0
 $     loop1:
-$       plat_entry = f$element(plat_i,",",info_platforms)
+$       plat_entry = f$element( plat_i, ",", info_platforms)
 $       plat_i = plat_i + 1
 $       if plat_entry .eqs. "" then goto loop1
 $       if plat_entry .nes. ","
 $       then
 $         if f$extract(0,1,plat_entry) .nes. "!" then negatives = 0
-$         if f$getsyi("CPU") .lt. 128
+$         if (arch_vax)
 $         then
 $           if plat_entry .eqs. "EXPORT_VAR_AS_FUNCTION" then -
 $             truesum = truesum + 1
@@ -276,6 +362,7 @@ $             falsesum = falsesum + 1
 $         endif
 $!
 $         if ((plat_entry .eqs. "VMS") .or. -
+            ((plat_entry .eqs. "ZLIB") .and. (ZLIB .nes. "")) .or. -
             (arch_vax .and. (plat_entry .eqs. "VMSVAX"))) then -
             truesum = truesum + 1
 $!
@@ -301,8 +388,7 @@ $	alg_i = alg_i + 1
 $       if alg_entry .eqs. "" then goto loop2
 $       if alg_entry .nes. ","
 $       then
-$         if alg_entry .eqs. "KRB5" then goto loop ! Special for now
-$	  if alg_entry .eqs. "STATIC_ENGINE" then goto loop ! Special for now
+$	  if disabled_algorithms - ("," + alg_entry + ",") .nes disabled_algorithms then goto loop
 $         if f$trnlnm("OPENSSL_NO_"+alg_entry) .nes. "" then goto loop
 $	  goto loop2
 $       endif
@@ -345,7 +431,7 @@ $
 $! The version number reader
 $ read_version_info:
 $   libver = ""
-$   open/read vf [.CRYPTO]OPENSSLV.H
+$   open /read vf [.CRYPTO]OPENSSLV.H
 $   loop_rvi:
 $     read/err=endloop_rvi/end=endloop_rvi vf rvi_line
 $     if rvi_line - "SHLIB_VERSION_NUMBER """ .eqs. rvi_line then -
@@ -369,3 +455,22 @@ $     endif
 $   endloop_rvi:
 $   close vf
 $   return
+$
+$! The disabled algorithms reader
+$ read_disabled_algorithms_info:
+$   disabled_algorithms = ","
+$   open /read cf [.CRYPTO.'ARCH']OPENSSLCONF.H
+$   loop_rci:
+$     read/err=endloop_rci/end=endloop_rci cf rci_line
+$     rci_line = f$edit(rci_line,"TRIM,COMPRESS")
+$     rci_ei = 0
+$     if f$extract(0,9,rci_line) .eqs. "# define " then rci_ei = 2
+$     if f$extract(0,8,rci_line) .eqs. "#define " then rci_ei = 1
+$     if rci_ei .eq. 0 then goto loop_rci
+$     rci_e = f$element(rci_ei," ",rci_line)
+$     if f$extract(0,11,rci_e) .nes. "OPENSSL_NO_" then goto loop_rci
+$     disabled_algorithms = disabled_algorithms + f$extract(11,999,rci_e) + ","
+$     goto loop_rci
+$   endloop_rci:
+$   close cf
+$   return

VMS/openssl_startup.com

@@ -0,0 +1,108 @@
+$!
+$! Startup file for OpenSSL 1.x.
+$!
+$! 2011-03-05 SMS.
+$!
+$! This procedure must reside in the OpenSSL installation directory.
+$! It will fail if it is copied to a different location.
+$!
+$! P1  qualifier(s) for DEFINE.  For example, "/SYSTEM" to get the
+$!     logical names defined in the system logical name table.
+$!
+$! P2  "64", to use executables which were built with 64-bit pointers.
+$!
+$! Good (default) and bad status values.
+$!
+$ status =    %x00010001 ! RMS$_NORMAL, normal successful completion.
+$ rms_e_fnf = %x00018292 ! RMS$_FNF, file not found.
+$!
+$! Prepare for problems.
+$!
+$ orig_dev_dir = f$environment( "DEFAULT")
+$ on control_y then goto clean_up
+$ on error then goto clean_up
+$!
+$! Determine hardware architecture.
+$!
+$ if (f$getsyi( "cpu") .lt. 128)
+$ then
+$   arch_name = "VAX"
+$ else
+$   arch_name = f$edit( f$getsyi( "arch_name"), "upcase")
+$   if (arch_name .eqs. "") then arch_name = "UNK"
+$ endif
+$!
+$ if (p2 .eqs. "64")
+$ then
+$   arch_name_exe = arch_name+ "_64"
+$ else
+$   arch_name_exe = arch_name
+$ endif
+$!
+$! Derive the OpenSSL installation device:[directory] from the location
+$! of this command procedure.
+$!
+$ proc = f$environment( "procedure")
+$ proc_dev_dir = f$parse( "A.;", proc, , , "no_conceal") - "A.;"
+$ proc_dev = f$parse( proc_dev_dir, , , "device", "syntax_only")
+$ proc_dir = f$parse( proc_dev_dir, , , "directory", "syntax_only") - -
+   ".][000000"- "[000000."- "]["- "["- "]"
+$ proc_dev_dir = proc_dev+ "["+ proc_dir+ "]"
+$ set default 'proc_dev_dir'
+$ set default [-]
+$ ossl_dev_dir = f$environment( "default")
+$!
+$! Check existence of expected directories (to see if this procedure has
+$! been moved away from its proper place).
+$!
+$ if ((f$search( "certs.dir;1") .eqs. "") .or. -
+   (f$search( "include.dir;1") .eqs. "") .or. -
+   (f$search( "private.dir;1") .eqs. "") .or. -
+   (f$search( "vms.dir;1") .eqs. ""))
+$ then
+$    write sys$output -
+      "   Can't find expected common OpenSSL directories in:"
+$    write sys$output "   ''ossl_dev_dir'"
+$    status = rms_e_fnf
+$    goto clean_up
+$ endif
+$!
+$ if ((f$search( "''arch_name_exe'_exe.dir;1") .eqs. "") .or. -
+   (f$search( "''arch_name'_lib.dir;1") .eqs. ""))
+$ then
+$    write sys$output -
+      "   Can't find expected architecture-specific OpenSSL directories in:"
+$    write sys$output "   ''ossl_dev_dir'"
+$    status = rms_e_fnf
+$    goto clean_up
+$ endif
+$!
+$! All seems well (enough).  Define the OpenSSL logical names.
+$!
+$ ossl_root = ossl_dev_dir- "]"+ ".]"
+$ define /translation_attributes = concealed /nolog'p1 SSLROOT 'ossl_root'
+$ define /nolog 'p1' SSLCERTS     sslroot:[certs]
+$ define /nolog 'p1' SSLINCLUDE   sslroot:[include]
+$ define /nolog 'p1' SSLPRIVATE   sslroot:[private]
+$ define /nolog 'p1' SSLEXE       sslroot:['arch_name_exe'_exe]
+$ define /nolog 'p1' SSLLIB       sslroot:['arch_name'_lib]
+$!
+$! Defining OPENSSL lets a C program use "#include <openssl/{foo}.h>":
+$ define /nolog 'p1' OPENSSL      SSLINCLUDE:
+$!
+$! Run a site-specific procedure, if it exists.
+$!
+$ if f$search( "sslroot:[vms]openssl_systartup.com") .nes."" then -
+   @ sslroot:[vms]openssl_systartup.com
+$!
+$! Restore the original default dev:[dir] (if known).
+$!
+$ clean_up:
+$!
+$ if (f$type( orig_dev_dir) .nes. "")
+$ then
+$    set default 'orig_dev_dir'
+$ endif
+$!
+$ EXIT 'status'
+$!

VMS/openssl_undo.com

@@ -0,0 +1,20 @@
+$!
+$! Deassign OpenSSL logical names.
+$!
+$ call deass "OPENSSL" "''p1'"
+$ call deass "SSLCERTS" "''p1'"
+$ call deass "SSLEXE" "''p1'"
+$ call deass "SSLINCLUDE" "''p1'"
+$ call deass "SSLLIB" "''p1'"
+$ call deass "SSLPRIVATE" "''p1'"
+$ call deass "SSLROOT" "''p1'"
+$!
+$ exit
+$!
+$deass: subroutine
+$ if (f$trnlnm( p1) .nes. "")
+$ then
+$    deassign 'p2' 'p1'
+$ endif
+$ endsubroutine
+$!

apps/CA.com

@@ -37,14 +37,25 @@ $ VERIFY = openssl + " verify"
 $ X509   = openssl + " x509"
 $ PKCS12 = openssl + " pkcs12"
 $ echo   = "write sys$Output"
+$ RET = 1
 $!
-$ s = F$PARSE(F$ENVIRONMENT("DEFAULT"),"[]") - "].;"
-$ CATOP  := 's'.demoCA
-$ CAKEY  := ]cakey.pem
-$ CACERT := ]cacert.pem
+$! 2010-12-20 SMS.
+$! Use a concealed logical name to reduce command line lengths, to
+$! avoid DCL errors on VAX:
+$!     %DCL-W-TKNOVF, command element is too long - shorten
+$! (Path segments like "openssl-1_0_1-stable-SNAP-20101217" accumulate
+$! quickly.)
+$!
+$ CATOP = F$PARSE( F$ENVIRONMENT( "DEFAULT"), "[]")- "].;"+ ".demoCA.]"
+$ define /translation_attributes = concealed CATOP 'CATOP'
+$!
+$ on error then goto clean_up
+$ on control_y then goto clean_up
+$!
+$ CAKEY  = "CATOP:[private]cakey.pem"
+$ CACERT = "CATOP:[000000]cacert.pem"
 $
 $ __INPUT := SYS$COMMAND
-$ RET = 1
 $!
 $ i = 1
 $opt_loop:
@@ -55,7 +66,7 @@ $
 $ IF (prog_opt .EQS. "?" .OR. prog_opt .EQS. "-h" .OR. prog_opt .EQS. "-help") 
 $ THEN
 $   echo "usage: CA -newcert|-newreq|-newca|-sign|-verify" 
-$   exit
+$   goto clean_up
 $ ENDIF
 $!
 $ IF (prog_opt .EQS. "-input")
@@ -69,7 +80,7 @@ $!
 $ IF (prog_opt .EQS. "-newcert")
 $ THEN
 $   ! Create a certificate.
-$   DEFINE/USER SYS$INPUT '__INPUT'
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
 $   REQ -new -x509 -keyout newreq.pem -out newreq.pem 'DAYS'
 $   RET=$STATUS
 $   echo "Certificate (and private key) is in newreq.pem"
@@ -79,7 +90,7 @@ $!
 $ IF (prog_opt .EQS. "-newreq")
 $ THEN
 $   ! Create a certificate request
-$   DEFINE/USER SYS$INPUT '__INPUT'
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
 $   REQ -new -keyout newreq.pem -out newreq.pem 'DAYS'
 $   RET=$STATUS
 $   echo "Request (and private key) is in newreq.pem"
@@ -90,41 +101,40 @@ $ IF (prog_opt .EQS. "-newca")
 $ THEN
 $   ! If explicitly asked for or it doesn't exist then setup the directory
 $   ! structure that Eric likes to manage things.
-$   IF F$SEARCH(CATOP+"]serial.") .EQS. ""
+$   IF F$SEARCH( "CATOP:[000000]serial.") .EQS. ""
 $   THEN
-$     CREATE /DIR /PROTECTION=OWNER:RWED 'CATOP']
-$     CREATE /DIR /PROTECTION=OWNER:RWED 'CATOP'.certs]
-$     CREATE /DIR /PROTECTION=OWNER:RWED 'CATOP'.crl]
-$     CREATE /DIR /PROTECTION=OWNER:RWED 'CATOP'.newcerts]
-$     CREATE /DIR /PROTECTION=OWNER:RWED 'CATOP'.private]
+$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[000000]
+$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[certs]
+$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[crl]
+$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[newcerts]
+$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[private]
 $
-$     OPEN   /WRITE ser_file 'CATOP']serial. 
+$     OPEN /WRITE ser_file CATOP:[000000]serial. 
 $     WRITE ser_file "01"
 $     CLOSE ser_file
-$     APPEND/NEW NL: 'CATOP']index.txt
+$     APPEND /NEW_VERSION NL: CATOP:[000000]index.txt
 $
 $     ! The following is to make sure access() doesn't get confused.  It
 $     ! really needs one file in the directory to give correct answers...
-$     COPY NLA0: 'CATOP'.certs].;
-$     COPY NLA0: 'CATOP'.crl].;
-$     COPY NLA0: 'CATOP'.newcerts].;
-$     COPY NLA0: 'CATOP'.private].;
+$     COPY NLA0: CATOP:[certs].;
+$     COPY NLA0: CATOP:[crl].;
+$     COPY NLA0: CATOP:[newcerts].;
+$     COPY NLA0: CATOP:[private].;
 $   ENDIF
 $!
-$   IF F$SEARCH(CATOP+".private"+CAKEY) .EQS. ""
+$   IF F$SEARCH( CAKEY) .EQS. ""
 $   THEN
 $     READ '__INPUT' FILE -
-	   /PROMPT="CA certificate filename (or enter to create)"
+       /PROMPT="CA certificate filename (or enter to create): "
 $     IF (FILE .NES. "") .AND. (F$SEARCH(FILE) .NES. "")
 $     THEN
-$       COPY 'FILE' 'CATOP'.private'CAKEY'
-$	RET=$STATUS
+$       COPY 'FILE' 'CAKEY'
+$       RET=$STATUS
 $     ELSE
 $       echo "Making CA certificate ..."
-$       DEFINE/USER SYS$INPUT '__INPUT'
-$       REQ -new -x509 -keyout 'CATOP'.private'CAKEY' -
-		       -out 'CATOP''CACERT' 'DAYS'
-$	RET=$STATUS
+$       DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$       REQ -new -x509 -keyout 'CAKEY' -out 'CACERT' 'DAYS'
+$       RET=$STATUS
 $     ENDIF
 $   ENDIF
 $   GOTO opt_loop_continue
@@ -135,16 +145,16 @@ $ THEN
 $   i = i + 1
 $   cname = P'i'
 $   IF cname .EQS. "" THEN cname = "My certificate"
-$   PKCS12 -in newcert.pem -inkey newreq.pem -certfile 'CATOP''CACERT -
-	   -out newcert.p12 -export -name "''cname'"
+$   PKCS12 -in newcert.pem -inkey newreq.pem -certfile 'CACERT' -
+     -out newcert.p12 -export -name "''cname'"
 $   RET=$STATUS
-$   exit RET
+$   goto clean_up
 $ ENDIF
 $!
 $ IF (prog_opt .EQS. "-xsign")
 $ THEN
 $!
-$   DEFINE/USER SYS$INPUT '__INPUT'
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
 $   CA -policy policy_anything -infiles newreq.pem
 $   RET=$STATUS
 $   GOTO opt_loop_continue
@@ -153,7 +163,7 @@ $!
 $ IF ((prog_opt .EQS. "-sign") .OR. (prog_opt .EQS. "-signreq"))
 $ THEN
 $!   
-$   DEFINE/USER SYS$INPUT '__INPUT'
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
 $   CA -policy policy_anything -out newcert.pem -infiles newreq.pem
 $   RET=$STATUS
 $   type newcert.pem
@@ -165,9 +175,9 @@ $ IF (prog_opt .EQS. "-signcert")
 $  THEN
 $!   
 $   echo "Cert passphrase will be requested twice - bug?"
-$   DEFINE/USER SYS$INPUT '__INPUT'
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
 $   X509 -x509toreq -in newreq.pem -signkey newreq.pem -out tmp.pem
-$   DEFINE/USER SYS$INPUT '__INPUT'
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
 $   CA -policy policy_anything -out newcert.pem -infiles tmp.pem
 y
 y
@@ -182,17 +192,17 @@ $!
 $   i = i + 1
 $   IF (p'i' .EQS. "")
 $   THEN
-$     DEFINE/USER SYS$INPUT '__INPUT'
-$     VERIFY "-CAfile" 'CATOP''CACERT' newcert.pem
+$     DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$     VERIFY "-CAfile" 'CACERT' newcert.pem
 $   ELSE
 $     j = i
 $    verify_opt_loop:
 $     IF j .GT. 8 THEN GOTO verify_opt_loop_end
 $     IF p'j' .NES. ""
 $     THEN 
-$       DEFINE/USER SYS$INPUT '__INPUT'
+$       DEFINE /USER_MODE SYS$INPUT '__INPUT'
 $       __tmp = p'j'
-$       VERIFY "-CAfile" 'CATOP''CACERT' '__tmp'
+$       VERIFY "-CAfile" 'CACERT' '__tmp'
 $       tmp=$STATUS
 $       IF tmp .NE. 0 THEN RET=tmp
 $     ENDIF
@@ -208,8 +218,8 @@ $ IF (prog_opt .NES. "")
 $ THEN
 $!   
 $   echo "Unknown argument ''prog_opt'"
-$   
-$   EXIT 3
+$   RET = 3
+$   goto clean_up
 $ ENDIF
 $
 $opt_loop_continue:
@@ -217,4 +227,10 @@ $ i = i + 1
 $ GOTO opt_loop
 $
 $opt_loop_end:
+$!
+$clean_up:
+$!
+$ if f$trnlnm( "CATOP", "LNM$PROCESS") .nes. "" then -
+   deassign /process CATOP
+$!
 $ EXIT 'RET'

apps/apps.c

@@ -257,6 +257,8 @@ int args_from_file(char *file, int *argc, char **argv[])
 
 int str2fmt(char *s)
 	{
+	if (s == NULL)
+		return FORMAT_UNDEF;
 	if 	((*s == 'D') || (*s == 'd'))
 		return(FORMAT_ASN1);
 	else if ((*s == 'T') || (*s == 't'))
@@ -796,7 +798,9 @@ X509 *load_cert(BIO *err, const char *file, int format,
 	if (file == NULL)
 		{
 #ifdef _IONBF
+# ifndef OPENSSL_NO_SETVBUF_IONBF
 		setvbuf(stdin, NULL, _IONBF, 0);
+# endif /* ndef OPENSSL_NO_SETVBUF_IONBF */
 #endif
 		BIO_set_fp(cert,stdin,BIO_NOCLOSE);
 		}
@@ -897,7 +901,9 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 	if (file == NULL && maybe_stdin)
 		{
 #ifdef _IONBF
+# ifndef OPENSSL_NO_SETVBUF_IONBF
 		setvbuf(stdin, NULL, _IONBF, 0);
+# endif /* ndef OPENSSL_NO_SETVBUF_IONBF */
 #endif
 		BIO_set_fp(key,stdin,BIO_NOCLOSE);
 		}
@@ -986,7 +992,9 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 	if (file == NULL && maybe_stdin)
 		{
 #ifdef _IONBF
+# ifndef OPENSSL_NO_SETVBUF_IONBF
 		setvbuf(stdin, NULL, _IONBF, 0);
+# endif /* ndef OPENSSL_NO_SETVBUF_IONBF */
 #endif
 		BIO_set_fp(key,stdin,BIO_NOCLOSE);
 		}

apps/asn1pars.c

@@ -408,6 +408,7 @@ static int do_generate(BIO *bio, char *genstr, char *genconf, BUF_MEM *buf)
 
 	atyp = ASN1_generate_nconf(genstr, cnf);
 	NCONF_free(cnf);
+	cnf = NULL;
 
 	if (!atyp)
 		return -1;

apps/cms.c

@@ -618,7 +618,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-certsout file certificate output file\n");
 		BIO_printf (bio_err, "-signer file   signer certificate file\n");
 		BIO_printf (bio_err, "-recip  file   recipient certificate file for decryption\n");
-		BIO_printf (bio_err, "-skeyid        use subject key identifier\n");
+		BIO_printf (bio_err, "-keyid        use subject key identifier\n");
 		BIO_printf (bio_err, "-in file       input file\n");
 		BIO_printf (bio_err, "-inform arg    input format SMIME (default), PEM or DER\n");
 		BIO_printf (bio_err, "-inkey file    input private key (if not signer or recipient)\n");

apps/enc.c

@@ -393,8 +393,10 @@ bad:
 
 	if (inf == NULL)
 	        {
+#ifndef OPENSSL_NO_SETVBUF_IONBF
 		if (bufsize != NULL)
 			setvbuf(stdin, (char *)NULL, _IONBF, 0);
+#endif /* ndef OPENSSL_NO_SETVBUF_IONBF */
 		BIO_set_fp(in,stdin,BIO_NOCLOSE);
 	        }
 	else
@@ -447,8 +449,10 @@ bad:
 	if (outf == NULL)
 		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
+#ifndef OPENSSL_NO_SETVBUF_IONBF
 		if (bufsize != NULL)
 			setvbuf(stdout, (char *)NULL, _IONBF, 0);
+#endif /* ndef OPENSSL_NO_SETVBUF_IONBF */
 #ifdef OPENSSL_SYS_VMS
 		{
 		BIO *tmpbio = BIO_new(BIO_f_linebuffer());

apps/install-apps.com

@@ -0,0 +1,107 @@
+$! INSTALL.COM -- Installs the files in a given directory tree
+$!
+$! Author: Richard Levitte <richard@levitte.org>
+$! Time of creation: 22-MAY-1998 10:13
+$!
+$! P1  root of the directory tree
+$! P2  "64" for 64-bit pointers.
+$!
+$!
+$! Announce/identify.
+$!
+$ proc = f$environment( "procedure")
+$ write sys$output "@@@ "+ -
+   f$parse( proc, , , "name")+ f$parse( proc, , , "type")
+$!
+$ on error then goto tidy
+$ on control_c then goto tidy
+$!
+$ if (p1 .eqs. "")
+$ then
+$   write sys$output "First argument missing."
+$   write sys$output -
+     "It should be the directory where you want things installed."
+$   exit
+$ endif
+$!
+$ if (f$getsyi("cpu") .lt. 128)
+$ then
+$   arch = "VAX"
+$ else
+$   arch = f$edit( f$getsyi( "arch_name"), "upcase")
+$   if (arch .eqs. "") then arch = "UNK"
+$ endif
+$!
+$ archd = arch
+$!
+$ if (p2 .nes. "")
+$ then
+$   if (p2 .eqs. "64")
+$   then
+$     archd = arch+ "_64"
+$   else
+$     if (p2 .nes. "32")
+$     then
+$       write sys$output "Second argument invalid."
+$       write sys$output "It should be "32", "64", or nothing."
+$       exit
+$     endif
+$   endif
+$ endif
+$!
+$ root = f$parse( p1, "[]A.;0", , , "syntax_only, no_conceal") - "A.;0"
+$ root_dev = f$parse(root,,,"device","syntax_only")
+$ root_dir = f$parse(root,,,"directory","syntax_only") - -
+   "[000000." - "][" - "[" - "]"
+$ root = root_dev + "[" + root_dir
+$!
+$ define /nolog wrk_sslroot 'root'.] /trans=conc
+$ define /nolog wrk_sslxexe wrk_sslroot:['archd'_exe]
+$!
+$ if f$parse("wrk_sslroot:[000000]") .eqs. "" then -
+   create /directory /log wrk_sslroot:[000000]
+$ if f$parse("wrk_sslxexe:") .eqs. "" then -
+   create /directory /log wrk_sslxexe:
+$!
+$ exe := openssl
+$!
+$ exe_dir := [-.'archd'.exe.apps]
+$!
+$! Executables.
+$!
+$ i = 0
+$ loop_exe:
+$   e = f$edit(f$element( i, ",", exe), "trim")
+$   i = i + 1
+$   if e .eqs. "," then goto loop_exe_end
+$   set noon
+$   file = exe_dir+ e+ ".exe"
+$   if f$search( file) .nes. ""
+$   then
+$     copy /protection = w:re 'file' wrk_sslxexe: /log
+$   endif
+$   set on
+$ goto loop_exe
+$ loop_exe_end:
+$!
+$! Miscellaneous.
+$!
+$ set noon
+$ copy /protection = w:re ca.com wrk_sslxexe:ca.com /log
+$ copy /protection = w:re openssl-vms.cnf wrk_sslroot:[000000]openssl.cnf /log
+$ set on
+$!
+$ tidy:
+$!
+$ call deass wrk_sslroot
+$ call deass wrk_sslxexe
+$!
+$ exit
+$!
+$ deass: subroutine
+$ if (f$trnlnm( p1, "LNM$PROCESS") .nes. "")
+$ then
+$   deassign /process 'p1'
+$ endif
+$ endsubroutine
+$!

apps/install.com

@@ -1,65 +0,0 @@
-$! INSTALL.COM -- Installs the files in a given directory tree
-$!
-$! Author: Richard Levitte <richard@levitte.org>
-$! Time of creation: 22-MAY-1998 10:13
-$!
-$! P1	root of the directory tree
-$!
-$
-$	IF P1 .EQS. ""
-$	THEN
-$	    WRITE SYS$OUTPUT "First argument missing."
-$	    WRITE SYS$OUTPUT -
-		  "Should be the directory where you want things installed."
-$	    EXIT
-$	ENDIF
-$
-$	IF (F$GETSYI("CPU").LT.128)
-$	THEN
-$	    ARCH := VAX
-$	ELSE
-$	    ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
-$	    IF (ARCH .EQS. "") THEN ARCH = "UNK"
-$	ENDIF
-$
-$	ROOT = F$PARSE(P1,"[]A.;0",,,"SYNTAX_ONLY,NO_CONCEAL") - "A.;0"
-$	ROOT_DEV = F$PARSE(ROOT,,,"DEVICE","SYNTAX_ONLY")
-$	ROOT_DIR = F$PARSE(ROOT,,,"DIRECTORY","SYNTAX_ONLY") -
-		   - "[000000." - "][" - "[" - "]"
-$	ROOT = ROOT_DEV + "[" + ROOT_DIR
-$
-$	DEFINE/NOLOG WRK_SSLROOT 'ROOT'.] /TRANS=CONC
-$	DEFINE/NOLOG WRK_SSLEXE WRK_SSLROOT:['ARCH'_EXE]
-$
-$	IF F$PARSE("WRK_SSLROOT:[000000]") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLROOT:[000000]
-$	IF F$PARSE("WRK_SSLEXE:") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLEXE:
-$
-$	EXE := openssl
-$
-$	EXE_DIR := [-.'ARCH'.EXE.APPS]
-$
-$	I = 0
-$ LOOP_EXE: 
-$	E = F$EDIT(F$ELEMENT(I, ",", EXE),"TRIM")
-$	I = I + 1
-$	IF E .EQS. "," THEN GOTO LOOP_EXE_END
-$	SET NOON
-$	IF F$SEARCH(EXE_DIR+E+".EXE") .NES. ""
-$	THEN
-$	  COPY 'EXE_DIR''E'.EXE WRK_SSLEXE:'E'.EXE/log
-$	  SET FILE/PROT=W:RE WRK_SSLEXE:'E'.EXE
-$	ENDIF
-$	SET ON
-$	GOTO LOOP_EXE
-$ LOOP_EXE_END:
-$
-$	SET NOON
-$	COPY CA.COM WRK_SSLEXE:CA.COM/LOG
-$	SET FILE/PROT=W:RE WRK_SSLEXE:CA.COM
-$	COPY OPENSSL-VMS.CNF WRK_SSLROOT:[000000]OPENSSL.CNF/LOG
-$	SET FILE/PROT=W:R WRK_SSLROOT:[000000]OPENSSL.CNF
-$	SET ON
-$
-$	EXIT

apps/makeapps.com

@@ -39,11 +39,35 @@ $!  P4, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
 $!
 $!  P5, if defined, sets a choice of programs to compile.
 $!
+$!  P6, if defined, specifies the C pointer size.  Ignored on VAX.
+$!      ("64=ARGV" gives more efficient code with HP C V7.3 or newer.)
+$!      Supported values are:
+$!
+$!      ""       Compile with default (/NOPOINTER_SIZE)
+$!      32       Compile with /POINTER_SIZE=32 (SHORT)
+$!      64       Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV])
+$!               (Automatically select ARGV if compiler supports it.)
+$!      64=      Compile with /POINTER_SIZE=64 (LONG).
+$!      64=ARGV  Compile with /POINTER_SIZE=64=ARGV (LONG=ARGV).
+$!
+$!  P7, if defined, specifies a directory where ZLIB files (zlib.h,
+$!  libz.olb) may be found.  Optionally, a non-default object library
+$!  name may be included ("dev:[dir]libz_64.olb", for example).
+$!
+$!
+$! Announce/identify.
+$!
+$ proc = f$environment( "procedure")
+$ write sys$output "@@@ "+ -
+   f$parse( proc, , , "name")+ f$parse( proc, , , "type")
+$!
+$ on control_c then goto exit
 $!
 $! Define A TCP/IP Library That We Will Need To Link To.
 $! (That Is, If We Need To Link To One.)
 $!
 $ TCPIP_LIB = ""
+$ ZLIB_LIB = ""
 $!
 $! Check What Architecture We Are Using.
 $!
@@ -67,37 +91,53 @@ $! End The Architecture Check.
 $!
 $ ENDIF
 $!
+$ ARCHD = ARCH
+$ LIB32 = "32"
+$ OPT_FILE = ""
+$ POINTER_SIZE = ""
+$!
 $! Define what programs should be compiled
 $!
 $ PROGRAMS := OPENSSL
 $!
-$! Define The CRYPTO Library.
-$!
-$ CRYPTO_LIB := SYS$DISK:[-.'ARCH'.EXE.CRYPTO]LIBCRYPTO.OLB
-$!
-$! Define The SSL Library.
-$!
-$ SSL_LIB := SYS$DISK:[-.'ARCH'.EXE.SSL]LIBSSL.OLB
-$!
-$! Define The OBJ Directory.
-$!
-$ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.APPS]
-$!
-$! Define The EXE Directory.
-$!
-$ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.APPS]
-$!
 $! Check To Make Sure We Have Valid Command Line Parameters.
 $!
 $ GOSUB CHECK_OPTIONS
 $!
+$! Define The CRYPTO Library.
+$!
+$ CRYPTO_LIB := SYS$DISK:[-.'ARCHD'.EXE.CRYPTO]SSL_LIBCRYPTO'LIB32'.OLB
+$!
+$! Define The SSL Library.
+$!
+$ SSL_LIB := SYS$DISK:[-.'ARCHD'.EXE.SSL]SSL_LIBSSL'LIB32'.OLB
+$!
+$! Define The OBJ and EXE Directories.
+$!
+$ OBJ_DIR := SYS$DISK:[-.'ARCHD'.OBJ.APPS]
+$ EXE_DIR := SYS$DISK:[-.'ARCHD'.EXE.APPS]
+$!
+$! Specify the destination directory in any /MAP option.
+$!
+$ if (LINKMAP .eqs. "MAP")
+$ then
+$   LINKMAP = LINKMAP+ "=''EXE_DIR'"
+$ endif
+$!
+$! Add the location prefix to the linker options file name.
+$!
+$ if (OPT_FILE .nes. "")
+$ then
+$   OPT_FILE = EXE_DIR+ OPT_FILE
+$ endif
+$!
 $! Initialise logical names and such
 $!
 $ GOSUB INITIALISE
 $!
 $! Tell The User What Kind of Machine We Run On.
 $!
-$ WRITE SYS$OUTPUT "Compiling On A ",ARCH," Machine."
+$ WRITE SYS$OUTPUT "Host system architecture: ''ARCHD'"
 $!
 $! Check To See If The OBJ Directory Exists.
 $!
@@ -145,6 +185,9 @@ $ LIB_OPENSSL = "VERIFY,ASN1PARS,REQ,DGST,DH,DHPARAM,ENC,PASSWD,GENDH,ERRSTR,"+-
 	      	"S_TIME,APPS,S_CB,S_SOCKET,APP_RAND,VERSION,SESS_ID,"+-
 	      	"CIPHERS,NSEQ,PKCS12,PKCS8,PKEY,PKEYPARAM,PKEYUTL,"+ -
 	      	"SPKAC,SMIME,CMS,RAND,ENGINE,OCSP,PRIME,TS"
+$!
+$ LIB_OPENSSL = LIB_OPENSSL+ ",VMS_DECC_INIT"
+$!
 $ TCPIP_PROGRAMS = ",,"
 $ IF COMPILER .EQS. "VAXC" THEN -
      TCPIP_PROGRAMS = ",OPENSSL,"
@@ -202,7 +245,7 @@ $   LIB_COUNTER = -1
 $!
 $!  Create a .OPT file for the object files
 $!
-$   OPEN/WRITE OBJECTS 'EXE_DIR''CURRENT_APP'.OPT
+$   OPEN /WRITE OBJECTS 'EXE_DIR''CURRENT_APP'.OPT
 $!
 $!  Top Of The File Loop.
 $!
@@ -289,34 +332,18 @@ $   GOTO NEXT_APP
 $ ENDIF
 $!
 $! Link The Program.
-$! Check To See If We Are To Link With A Specific TCP/IP Library.
 $!
 $ ON WARNING THEN GOTO NEXT_APP
 $!
-$ IF (TCPIP_LIB.NES."")
-$ THEN
-$!
 $! Don't Link With The RSAREF Routines And TCP/IP Library.
 $!
-$   LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
-	'EXE_DIR''CURRENT_APP'.OPT/OPTION, -
-        'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
-        'TCPIP_LIB','OPT_FILE'/OPTION
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Don't Link With The RSAREF Routines And Link With A TCP/IP Library.
-$!
-$   LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
-	'EXE_DIR''CURRENT_APP'.OPT/OPTION, -
-        'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
-        'OPT_FILE'/OPTION
-$!
-$! End The TCP/IP Library Check.
-$!
-$ ENDIF
+$ LINK /'DEBUGGER' /'LINKMAP' /'TRACEBACK' /EXE='EXE_FILE' -
+  'EXE_DIR''CURRENT_APP'.OPT /OPTIONS, -
+  'SSL_LIB' /LIBRARY, -
+  'CRYPTO_LIB' /LIBRARY -
+  'TCPIP_LIB' -
+  'ZLIB_LIB' -
+  ,'OPT_FILE' /OPTIONS
 $!
 $! Go Back And Do It Again.
 $!
@@ -351,7 +378,7 @@ $!
 $     CREATE 'OPT_FILE'
 $DECK
 !
-! Default System Options File To Link Agianst 
+! Default System Options File To Link Against 
 ! The Sharable VAX C Runtime Library.
 !
 SYS$SHARE:VAXCRTL.EXE/SHARE
@@ -380,7 +407,7 @@ $!
 $     CREATE 'OPT_FILE'
 $DECK
 !
-! Default System Options File To Link Agianst 
+! Default System Options File To Link Against 
 ! The Sharable C Runtime Library.
 !
 GNU_CC:[000000]GCCLIB/LIBRARY
@@ -415,7 +442,7 @@ $!
 $       CREATE 'OPT_FILE'
 $DECK
 !
-! Default System Options File To Link Agianst 
+! Default System Options File To Link Against 
 ! The Sharable DEC C Runtime Library.
 !
 SYS$SHARE:DECC$SHR.EXE/SHARE
@@ -430,7 +457,7 @@ $!
 $       CREATE 'OPT_FILE'
 $DECK
 !
-! Default System Options File For non-VAX To Link Agianst 
+! Default System Options File For non-VAX To Link Against 
 ! The Sharable C Runtime Library.
 !
 SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE
@@ -514,14 +541,15 @@ $!
 $ IF (P1.EQS."NODEBUG")
 $ THEN
 $!
-$!   P1 Is NODEBUG, So Compile Without Debugger Information.
+$!  P1 Is NODEBUG, So Compile Without Debugger Information.
 $!
-$    DEBUGGER  = "NODEBUG"
-$    TRACEBACK = "NOTRACEBACK" 
-$    GCC_OPTIMIZE = "OPTIMIZE"
-$    CC_OPTIMIZE = "OPTIMIZE"
-$    WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
-$    WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
+$   DEBUGGER  = "NODEBUG"
+$   LINKMAP = "NOMAP"
+$   TRACEBACK = "NOTRACEBACK" 
+$   GCC_OPTIMIZE = "OPTIMIZE"
+$   CC_OPTIMIZE = "OPTIMIZE"
+$   WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
+$   WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
 $!
 $! Else...
 $!
@@ -535,6 +563,7 @@ $!
 $!    Compile With Debugger Information.
 $!
 $     DEBUGGER  = "DEBUG"
+$     LINKMAP = "MAP"
 $     TRACEBACK = "TRACEBACK"
 $     GCC_OPTIMIZE = "NOOPTIMIZE"
 $     CC_OPTIMIZE = "NOOPTIMIZE"
@@ -542,7 +571,7 @@ $     WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile."
 $     WRITE SYS$OUTPUT "Compiling Without Compiler Optimization."
 $   ELSE
 $!
-$!    Tell The User Entered An Invalid Option..
+$!    Tell The User Entered An Invalid Option.
 $!
 $     WRITE SYS$OUTPUT ""
 $     WRITE SYS$OUTPUT "The Option ",P1," Is Invalid.  The Valid Options Are:"
@@ -563,6 +592,87 @@ $! End The P1 Check.
 $!
 $ ENDIF
 $!
+$! Check P6 (POINTER_SIZE).
+$!
+$ IF (P6 .NES. "") .AND. (ARCH .NES. "VAX")
+$ THEN
+$!
+$   IF (P6 .EQS. "32")
+$   THEN
+$     POINTER_SIZE = " /POINTER_SIZE=32"
+$   ELSE
+$     POINTER_SIZE = F$EDIT( P6, "COLLAPSE, UPCASE")
+$     IF ((POINTER_SIZE .EQS. "64") .OR. -
+       (POINTER_SIZE .EQS. "64=") .OR. -
+       (POINTER_SIZE .EQS. "64=ARGV"))
+$     THEN
+$       ARCHD = ARCH+ "_64"
+$       LIB32 = ""
+$       IF (F$EXTRACT( 2, 1, POINTER_SIZE) .EQS. "=")
+$       THEN
+$!        Explicit user choice: "64" or "64=ARGV".
+$         IF (POINTER_SIZE .EQS. "64=") THEN POINTER_SIZE = "64"
+$       ELSE
+$         SET NOON
+$         DEFINE /USER_MODE SYS$OUTPUT NL:
+$         DEFINE /USER_MODE SYS$ERROR NL:
+$         CC /NOLIST /NOOBJECT /POINTER_SIZE=64=ARGV NL:
+$         IF ($STATUS .AND. %X0FFF0000) .EQ. %X00030000
+$         THEN
+$           ! If we got here, it means DCL complained like this:
+$           ! %DCL-W-NOVALU, value not allowed - remove value specification
+$           !  \64=\
+$           !
+$           ! If the compiler was run, logicals defined in /USER would
+$           ! have been deassigned automatically.  However, when DCL
+$           ! complains, they aren't, so we do it here (it might be
+$           ! unnecessary, but just in case there will be another error
+$           ! message further on that we don't want to miss)
+$           DEASSIGN /USER_MODE SYS$ERROR
+$           DEASSIGN /USER_MODE SYS$OUTPUT
+$         ELSE
+$           POINTER_SIZE = POINTER_SIZE + "=ARGV"
+$         ENDIF
+$         SET ON
+$       ENDIF
+$       POINTER_SIZE = " /POINTER_SIZE=''POINTER_SIZE'"
+$!
+$     ELSE
+$!
+$!      Tell The User Entered An Invalid Option.
+$!
+$       WRITE SYS$OUTPUT ""
+$       WRITE SYS$OUTPUT "The Option ", P6, -
+         " Is Invalid.  The Valid Options Are:"
+$       WRITE SYS$OUTPUT ""
+$       WRITE SYS$OUTPUT -
+         "    """"  :  Compile with default (short) pointers."
+$       WRITE SYS$OUTPUT -
+         "    32  :  Compile with 32-bit (short) pointers."
+$       WRITE SYS$OUTPUT -
+         "    64       :  Compile with 64-bit (long) pointers (auto ARGV)."
+$       WRITE SYS$OUTPUT -
+         "    64=      :  Compile with 64-bit (long) pointers (no ARGV)."
+$       WRITE SYS$OUTPUT -
+         "    64=ARGV  :  Compile with 64-bit (long) pointers (ARGV)."
+$       WRITE SYS$OUTPUT ""
+$! 
+$!      Time To EXIT.
+$!
+$       EXIT
+$!
+$     ENDIF
+$!
+$   ENDIF
+$!
+$! End The P6 (POINTER_SIZE) Check.
+$!
+$ ENDIF
+$!
+$! Set basic C compiler /INCLUDE directories.
+$!
+$ CC_INCLUDES = "SYS$DISK:[-],SYS$DISK:[-.CRYPTO]"
+$!
 $! Check To See If P2 Is Blank.
 $!
 $ IF (P2.EQS."")
@@ -663,11 +773,64 @@ $ CCDEFS = "MONOLITH"
 $ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
 $ CCEXTRAFLAGS = ""
 $ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
-$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
+$ CCDISABLEWARNINGS = "" !!! "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
 $ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
 	CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS
 $!
-$!  Check To See If The User Entered A Valid Paramter.
+$! Check To See If We Have A ZLIB Option.
+$!
+$ ZLIB = P7
+$ IF (ZLIB .NES. "")
+$ THEN
+$!
+$!  Check for expected ZLIB files.
+$!
+$   err = 0
+$   file1 = f$parse( "zlib.h", ZLIB, , , "SYNTAX_ONLY")
+$   if (f$search( file1) .eqs. "")
+$   then
+$     WRITE SYS$OUTPUT ""
+$     WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
+$     WRITE SYS$OUTPUT "    Can't find header: ''file1'"
+$     err = 1
+$   endif
+$   file1 = f$parse( "A.;", ZLIB)- "A.;"
+$!
+$   file2 = f$parse( ZLIB, "libz.olb", , , "SYNTAX_ONLY")
+$   if (f$search( file2) .eqs. "")
+$   then
+$     if (err .eq. 0)
+$     then
+$       WRITE SYS$OUTPUT ""
+$       WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
+$     endif
+$     WRITE SYS$OUTPUT "    Can't find library: ''file2'"
+$     WRITE SYS$OUTPUT ""
+$     err = err+ 2
+$   endif
+$   if (err .eq. 1)
+$   then
+$     WRITE SYS$OUTPUT ""
+$   endif
+$!
+$   if (err .ne. 0)
+$   then
+$     EXIT
+$   endif
+$!
+$   CCDEFS = """ZLIB=1"", "+ CCDEFS
+$   CC_INCLUDES = CC_INCLUDES+ ", "+ file1
+$   ZLIB_LIB = ", ''file2' /library"
+$!
+$!  Print info
+$!
+$   WRITE SYS$OUTPUT "ZLIB library spec: ", file2
+$!
+$! End The ZLIB Check.
+$!
+$ ENDIF
+$!
+$!  Check To See If The User Entered A Valid Parameter.
 $!
 $ IF (P2.EQS."VAXC").OR.(P2.EQS."DECC").OR.(P2.EQS."GNUC")
 $ THEN
@@ -690,13 +853,13 @@ $!
 $     CC = "CC"
 $     IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
 	 THEN CC = "CC/DECC"
-$     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89" + -
-           "/NOLIST/PREFIX=ALL" + -
-	   "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
+$     CC = CC + " /''CC_OPTIMIZE' /''DEBUGGER' /STANDARD=RELAXED"+ -
+       "''POINTER_SIZE' /NOLIST /PREFIX=ALL" + -
+       " /INCLUDE=(''CC_INCLUDES') " + CCEXTRAFLAGS
 $!
 $!    Define The Linker Options File Name.
 $!
-$     OPT_FILE = "''EXE_DIR'VAX_DECC_OPTIONS.OPT"
+$     OPT_FILE = "VAX_DECC_OPTIONS.OPT"
 $!
 $!  End DECC Check.
 $!
@@ -724,7 +887,7 @@ $	EXIT
 $     ENDIF
 $     IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
 $     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
-	   "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
+	   "/INCLUDE=(''CC_INCLUDES')" + CCEXTRAFLAGS
 $     CCDEFS = CCDEFS + ",""VAXC"""
 $!
 $!    Define <sys> As SYS$COMMON:[SYSLIB]
@@ -733,7 +896,7 @@ $     DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB]
 $!
 $!    Define The Linker Options File Name.
 $!
-$     OPT_FILE = "''EXE_DIR'VAX_VAXC_OPTIONS.OPT"
+$     OPT_FILE = "VAX_VAXC_OPTIONS.OPT"
 $!
 $!  End VAXC Check
 $!
@@ -756,11 +919,11 @@ $!    Use GNU C...
 $!
 $     IF F$TYPE(GCC) .EQS. "" THEN GCC := GCC
 $     CC = GCC+"/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
-	   "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
+	   "/INCLUDE=(''CC_INCLUDES')" + CCEXTRAFLAGS
 $!
 $!    Define The Linker Options File Name.
 $!
-$     OPT_FILE = "''EXE_DIR'VAX_GNUC_OPTIONS.OPT"
+$     OPT_FILE = "VAX_GNUC_OPTIONS.OPT"
 $!
 $!  End The GNU C Check.
 $!
@@ -802,7 +965,7 @@ $   THEN
 $!
 $!    Set the library to use SOCKETSHR
 $!
-$     TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
+$     TCPIP_LIB = ",SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT /OPTIONS"
 $!
 $!    Done with SOCKETSHR
 $!
@@ -828,13 +991,13 @@ $   THEN
 $!
 $!    Set the library to use UCX.
 $!
-$     TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
+$     TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT /OPTIONS"
 $     IF F$TRNLNM("UCX$IPC_SHR") .NES. ""
 $     THEN
-$       TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT"
+$       TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT /OPTIONS"
 $     ELSE
 $       IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN -
-	  TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT"
+	  TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT /OPTIONS"
 $     ENDIF
 $!
 $!    Done with UCX
@@ -848,7 +1011,7 @@ $   THEN
 $!
 $!    Set the library to use TCPIP.
 $!
-$     TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
+$     TCPIP_LIB = ",SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT /OPTIONS"
 $!
 $!    Done with TCPIP
 $!
@@ -873,7 +1036,7 @@ $   CCDEFS = CCDEFS + ",TCPIP_TYPE_''P3'"
 $!
 $!  Print info
 $!
-$   WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB
+$   WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB- ","
 $!
 $!  Else The User Entered An Invalid Argument.
 $!
@@ -903,13 +1066,13 @@ $ IF COMPILER .EQS. "DECC"
 $ THEN
 $   IF CCDISABLEWARNINGS .NES. ""
 $   THEN
-$     CCDISABLEWARNINGS = "/WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
+$     CCDISABLEWARNINGS = " /WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
 $   ENDIF
 $ ELSE
 $   CCDISABLEWARNINGS = ""
 $ ENDIF
-$ CC2 = CC + "/DEFINE=(" + CCDEFS + ",_POSIX_C_SOURCE)" + CCDISABLEWARNINGS
-$ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
+$ CC2 = CC + " /DEFINE=(" + CCDEFS + ",_POSIX_C_SOURCE)" + CCDISABLEWARNINGS
+$ CC = CC + " /DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
 $!
 $! Show user the result
 $!
@@ -975,7 +1138,7 @@ $ __INCLUDE = __TOP + "INCLUDE.OPENSSL]"
 $!
 $! Set up the logical name OPENSSL to point at the include directory
 $!
-$ DEFINE OPENSSL/NOLOG '__INCLUDE'
+$ DEFINE OPENSSL /NOLOG '__INCLUDE'
 $!
 $! Done
 $!
@@ -983,15 +1146,24 @@ $ RETURN
 $!
 $ CLEANUP:
 $!
-$! Restore the logical name OPENSSL if it had a value
+$! Restore the saved logical name OPENSSL, if it had a value.
 $!
-$ IF __SAVE_OPENSSL .EQS. ""
-$ THEN
-$   DEASSIGN OPENSSL
-$ ELSE
-$   DEFINE/NOLOG OPENSSL '__SAVE_OPENSSL'
-$ ENDIF
+$ if (f$type( __SAVE_OPENSSL) .nes. "")
+$ then
+$   IF __SAVE_OPENSSL .EQS. ""
+$   THEN
+$     DEASSIGN OPENSSL
+$   ELSE
+$     DEFINE /NOLOG OPENSSL '__SAVE_OPENSSL'
+$   ENDIF
+$ endif
+$!
+$! Close any open files.
+$!
+$ if (f$trnlnm( "objects", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
+   close objects
 $!
 $! Done
 $!
 $ RETURN
+$!

apps/openssl-vms.cnf

@@ -145,7 +145,7 @@ localityName			= Locality Name (eg, city)
 organizationalUnitName		= Organizational Unit Name (eg, section)
 #organizationalUnitName_default	=
 
-commonName			= Common Name (eg, YOUR name)
+commonName			= Common Name (e.g. server FQDN or YOUR name)
 commonName_max			= 64
 
 emailAddress			= Email Address

apps/openssl.c

@@ -212,8 +212,13 @@ static void lock_dbg_cb(int mode, int type, const char *file, int line)
 		}
 	}
 
+#if defined( OPENSSL_SYS_VMS) && (__INITIAL_POINTER_SIZE == 64)
+# define ARGV _Argv
+#else
+# define ARGV Argv
+#endif
 
-int main(int Argc, char *Argv[])
+int main(int Argc, char *ARGV[])
 	{
 	ARGS arg;
 #define PROG_NAME_SIZE	39
@@ -228,6 +233,54 @@ int main(int Argc, char *Argv[])
 	LHASH_OF(FUNCTION) *prog=NULL;
 	long errline;
 
+#if defined( OPENSSL_SYS_VMS) && (__INITIAL_POINTER_SIZE == 64)
+	/* 2011-03-22 SMS.
+	 * If we have 32-bit pointers everywhere, then we're safe, and
+	 * we bypass this mess, as on non-VMS systems.  (See ARGV,
+	 * above.)
+	 * Problem 1: Compaq/HP C before V7.3 always used 32-bit
+	 * pointers for argv[].
+	 * Fix 1: For a 32-bit argv[], when we're using 64-bit pointers
+	 * everywhere else, we always allocate and use a 64-bit
+	 * duplicate of argv[].
+	 * Problem 2: Compaq/HP C V7.3 (Alpha, IA64) before ECO1 failed
+	 * to NULL-terminate a 64-bit argv[].  (As this was written, the
+	 * compiler ECO was available only on IA64.)
+	 * Fix 2: Unless advised not to (VMS_TRUST_ARGV), we test a
+	 * 64-bit argv[argc] for NULL, and, if necessary, use a
+	 * (properly) NULL-terminated (64-bit) duplicate of argv[].
+	 * The same code is used in either case to duplicate argv[].
+	 * Some of these decisions could be handled in preprocessing,
+	 * but the code tends to get even uglier, and the penalty for
+	 * deciding at compile- or run-time is tiny.
+	 */
+	char **Argv = NULL;
+	int free_Argv = 0;
+
+	if ((sizeof( _Argv) < 8)        /* 32-bit argv[]. */
+# if !defined( VMS_TRUST_ARGV)
+	 || (_Argv[ Argc] != NULL)      /* Untrusted argv[argc] not NULL. */
+# endif
+		)
+		{
+		int i;
+		Argv = OPENSSL_malloc( (Argc+ 1)* sizeof( char *));
+		if (Argv == NULL)
+			{ ret = -1; goto end; }
+		for(i = 0; i < Argc; i++)
+			Argv[i] = _Argv[i];
+		Argv[ Argc] = NULL;     /* Certain NULL termination. */
+		free_Argv = 1;
+		}
+	else
+		{
+		/* Use the known-good 32-bit argv[] (which needs the
+		 * type cast to satisfy the compiler), or the trusted or
+		 * tested-good 64-bit argv[] as-is. */
+		Argv = (char **)_Argv;
+		}
+#endif /* defined( OPENSSL_SYS_VMS) && (__INITIAL_POINTER_SIZE == 64) */
+
 	arg.data=NULL;
 	arg.count=0;
 
@@ -373,6 +426,13 @@ end:
 		BIO_free(bio_err);
 		bio_err=NULL;
 		}
+#if defined( OPENSSL_SYS_VMS) && (__INITIAL_POINTER_SIZE == 64)
+	/* Free any duplicate Argv[] storage. */
+	if (free_Argv)
+		{
+		OPENSSL_free(Argv);
+		}
+#endif
 	OPENSSL_EXIT(ret);
 	}
 

apps/openssl.cnf

@@ -145,7 +145,7 @@ localityName			= Locality Name (eg, city)
 organizationalUnitName		= Organizational Unit Name (eg, section)
 #organizationalUnitName_default	=
 
-commonName			= Common Name (eg, YOUR name)
+commonName			= Common Name (e.g. server FQDN or YOUR name)
 commonName_max			= 64
 
 emailAddress			= Email Address

apps/pkcs12.c

@@ -647,7 +647,7 @@ int MAIN(int argc, char **argv)
 
     if (!twopass) BUF_strlcpy(macpass, pass, sizeof macpass);
 
-    if (options & INFO) BIO_printf (bio_err, "MAC Iteration %ld\n", p12->mac->iter ? ASN1_INTEGER_get (p12->mac->iter) : 1);
+    if ((options & INFO) && p12->mac) BIO_printf (bio_err, "MAC Iteration %ld\n", p12->mac->iter ? ASN1_INTEGER_get (p12->mac->iter) : 1);
     if(macver) {
 #ifdef CRYPTO_MDEBUG
     CRYPTO_push_info("verify MAC");

apps/pkeyutl.c

@@ -119,17 +119,17 @@ int MAIN(int argc, char **argv)
 		if (!strcmp(*argv,"-in"))
 			{
 			if (--argc < 1) badarg = 1;
-                        infile= *(++argv);
+                        else infile= *(++argv);
 			}
 		else if (!strcmp(*argv,"-out"))
 			{
 			if (--argc < 1) badarg = 1;
-			outfile= *(++argv);
+			else outfile= *(++argv);
 			}
 		else if (!strcmp(*argv,"-sigfile"))
 			{
 			if (--argc < 1) badarg = 1;
-			sigfile= *(++argv);
+			else sigfile= *(++argv);
 			}
 		else if(!strcmp(*argv, "-inkey"))
 			{
@@ -159,17 +159,17 @@ int MAIN(int argc, char **argv)
 		else if (!strcmp(*argv,"-passin"))
 			{
 			if (--argc < 1) badarg = 1;
-			passargin= *(++argv);
+			else passargin= *(++argv);
 			}
 		else if (strcmp(*argv,"-peerform") == 0)
 			{
 			if (--argc < 1) badarg = 1;
-			peerform=str2fmt(*(++argv));
+			else peerform=str2fmt(*(++argv));
 			}
 		else if (strcmp(*argv,"-keyform") == 0)
 			{
 			if (--argc < 1) badarg = 1;
-			keyform=str2fmt(*(++argv));
+			else keyform=str2fmt(*(++argv));
 			}
 #ifndef OPENSSL_NO_ENGINE
 		else if(!strcmp(*argv, "-engine"))

apps/s_socket.c

@@ -406,6 +406,7 @@ redoit:
 	if (ret == INVALID_SOCKET)
 		{
 #if defined(OPENSSL_SYS_WINDOWS) || (defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK))
+		int i;
 		i=WSAGetLastError();
 		BIO_printf(bio_err,"accept error %d\n",i);
 #else

apps/speed.c

@@ -1230,7 +1230,8 @@ int MAIN(int argc, char **argv)
 		count*=2;
 		Time_F(START);
 		for (it=count; it; it--)
-			DES_ecb_encrypt(buf_as_des_cblock,buf_as_des_cblock,
+			DES_ecb_encrypt((DES_cblock *)buf,
+				(DES_cblock *)buf,
 				&sch,DES_ENCRYPT);
 		d=Time_F(STOP);
 		} while (d <3);
@@ -2702,6 +2703,7 @@ static int do_multi(int multi)
 				else
 					rsa_results[k][1]=d;
 				}
+#ifndef OPENSSL_NO_DSA
 			else if(!strncmp(buf,"+F3:",4))
 				{
 				int k;
@@ -2723,6 +2725,7 @@ static int do_multi(int multi)
 				else
 					dsa_results[k][1]=d;
 				}
+#endif
 #ifndef OPENSSL_NO_ECDSA
 			else if(!strncmp(buf,"+F4:",4))
 				{

apps/vms_decc_init.c

@@ -0,0 +1,188 @@
+#if defined( __VMS) && !defined( OPENSSL_NO_DECC_INIT) && \
+ defined( __DECC) && !defined( __VAX) && (__CRTL_VER >= 70301000)
+# define USE_DECC_INIT 1
+#endif
+
+#ifdef USE_DECC_INIT
+
+/*
+ * 2010-04-26 SMS.
+ *
+ *----------------------------------------------------------------------
+ *
+ *       decc_init()
+ *
+ *    On non-VAX systems, uses LIB$INITIALIZE to set a collection of C
+ *    RTL features without using the DECC$* logical name method.
+ *
+ *----------------------------------------------------------------------
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unixlib.h>
+
+
+/* Global storage. */
+
+/* Flag to sense if decc_init() was called. */
+
+int decc_init_done = -1;
+
+
+/* Structure to hold a DECC$* feature name and its desired value. */
+
+typedef struct
+{
+    char *name;
+    int value;
+} decc_feat_t;
+
+
+/* Array of DECC$* feature names and their desired values.
+ * Note: DECC$ARGV_PARSE_STYLE is the urgent one.
+ */
+
+decc_feat_t decc_feat_array[] =
+{
+ /* Preserve command-line case with SET PROCESS/PARSE_STYLE=EXTENDED */
+ { "DECC$ARGV_PARSE_STYLE", 1 },
+
+ /* Preserve case for file names on ODS5 disks. */
+ { "DECC$EFS_CASE_PRESERVE", 1 },
+
+ /* Enable multiple dots (and most characters) in ODS5 file names,
+  * while preserving VMS-ness of ";version".
+  */
+ { "DECC$EFS_CHARSET", 1 },
+
+ /* List terminator. */
+ { (char *)NULL, 0 }
+};
+
+
+/* LIB$INITIALIZE initialization function. */
+
+static void decc_init( void)
+{
+    char *openssl_debug_decc_init;
+    int verbose = 0;
+    int feat_index;
+    int feat_value;
+    int feat_value_max;
+    int feat_value_min;
+    int i;
+    int sts;
+
+    /* Get debug option. */
+    openssl_debug_decc_init = getenv( "OPENSSL_DEBUG_DECC_INIT");
+    if (openssl_debug_decc_init != NULL)
+    {
+        verbose = strtol( openssl_debug_decc_init, NULL, 10);
+        if (verbose <= 0)
+        {
+            verbose = 1;
+        }
+    }
+
+    /* Set the global flag to indicate that LIB$INITIALIZE worked. */
+    decc_init_done = 1;
+
+    /* Loop through all items in the decc_feat_array[]. */
+
+    for (i = 0; decc_feat_array[ i].name != NULL; i++)
+    {
+        /* Get the feature index. */
+        feat_index = decc$feature_get_index( decc_feat_array[ i].name);
+        if (feat_index >= 0)
+        {
+            /* Valid item.  Collect its properties. */
+            feat_value = decc$feature_get_value( feat_index, 1);
+            feat_value_min = decc$feature_get_value( feat_index, 2);
+            feat_value_max = decc$feature_get_value( feat_index, 3);
+
+            /* Check the validity of our desired value. */
+            if ((decc_feat_array[ i].value >= feat_value_min) &&
+             (decc_feat_array[ i].value <= feat_value_max))
+            {
+                /* Valid value.  Set it if necessary. */
+                if (feat_value != decc_feat_array[ i].value)
+                {
+                    sts = decc$feature_set_value( feat_index,
+                     1,
+                     decc_feat_array[ i].value);
+
+                     if (verbose > 1)
+                     {
+                         fprintf( stderr, " %s = %d, sts = %d.\n",
+                          decc_feat_array[ i].name,
+                          decc_feat_array[ i].value,
+                          sts);
+                     }
+                }
+            }
+            else
+            {
+                /* Invalid DECC feature value. */
+                fprintf( stderr,
+                 " INVALID DECC$FEATURE VALUE, %d: %d <= %s <= %d.\n",
+                 feat_value,
+                 feat_value_min, decc_feat_array[ i].name, feat_value_max);
+            }
+        }
+        else
+        {
+            /* Invalid DECC feature name. */
+            fprintf( stderr,
+             " UNKNOWN DECC$FEATURE: %s.\n", decc_feat_array[ i].name);
+        }
+    }
+
+    if (verbose > 0)
+    {
+        fprintf( stderr, " DECC_INIT complete.\n");
+    }
+}
+
+/* Get "decc_init()" into a valid, loaded LIB$INITIALIZE PSECT. */
+
+#pragma nostandard
+
+/* Establish the LIB$INITIALIZE PSECTs, with proper alignment and
+ * other attributes.  Note that "nopic" is significant only on VAX.
+ */
+#pragma extern_model save
+
+#if __INITIAL_POINTER_SIZE == 64
+# define PSECT_ALIGN 3
+#else
+# define PSECT_ALIGN 2
+#endif
+
+#pragma extern_model strict_refdef "LIB$INITIALIZ" PSECT_ALIGN, nopic, nowrt
+const int spare[ 8] = { 0 };
+
+#pragma extern_model strict_refdef "LIB$INITIALIZE" PSECT_ALIGN, nopic, nowrt
+void (*const x_decc_init)() = decc_init;
+
+#pragma extern_model restore
+
+/* Fake reference to ensure loading the LIB$INITIALIZE PSECT. */
+
+#pragma extern_model save
+
+int LIB$INITIALIZE( void);
+
+#pragma extern_model strict_refdef
+int dmy_lib$initialize = (int) LIB$INITIALIZE;
+
+#pragma extern_model restore
+
+#pragma standard
+
+#else /* def USE_DECC_INIT */
+
+/* Dummy code to avoid a %CC-W-EMPTYFILE complaint. */
+int decc_init_dummy( void);
+
+#endif /* def USE_DECC_INIT */

apps/x509.c

@@ -987,7 +987,7 @@ bad:
 				else
 					{
 					pk=load_key(bio_err,
-						keyfile, FORMAT_PEM, 0,
+						keyfile, keyformat, 0,
 						passin, e, "request key");
 					if (pk == NULL) goto end;
 					}

config

@@ -825,6 +825,10 @@ esac
 #  options="$options -DATALLA"
 #fi
 
+($CC -Wa,--help -c -o /dev/null -x assembler /dev/null 2>&1 | \
+ grep \\--noexecstack) 2>&1 > /dev/null && \
+  options="$options -Wa,--noexecstack"
+
 # gcc < 2.8 does not support -march=ultrasparc
 if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
 then

crypto/LPdir_vms.c

@@ -40,22 +40,18 @@
 #ifndef LPDIR_H
 #include "LPdir.h"
 #endif
+#include "vms_rms.h"
 
-/* Because some compiler options hide this macor */
+/* Some compiler options hide EVMSERR. */
 #ifndef EVMSERR
-#define EVMSERR		65535  /* error for non-translatable VMS errors */
+# define EVMSERR	65535  /* error for non-translatable VMS errors */
 #endif
 
 struct LP_dir_context_st
 {
   unsigned long VMS_context;
-#ifdef NAML$C_MAXRSS
-  char filespec[NAML$C_MAXRSS+1];
-  char result[NAML$C_MAXRSS+1];
-#else
-  char filespec[256];
-  char result[256];
-#endif
+  char filespec[ NAMX_MAXRSS+ 1];
+  char result[ NAMX_MAXRSS+ 1];
   struct dsc$descriptor_d filespec_dsc;
   struct dsc$descriptor_d result_dsc;
 };
@@ -66,6 +62,16 @@ const char *LP_find_file(LP_DIR_CTX **ctx, const char *directory)
   char *p, *r;
   size_t l;
   unsigned long flags = 0;
+
+/* Arrange 32-bit pointer to (copied) string storage, if needed. */
+#if __INITIAL_POINTER_SIZE == 64
+# pragma pointer_size save
+# pragma pointer_size 32
+        char *ctx_filespec_32p;
+# pragma pointer_size restore
+        char ctx_filespec_32[ NAMX_MAXRSS+ 1];
+#endif /* __INITIAL_POINTER_SIZE == 64 */
+
 #ifdef NAML$C_MAXRSS
   flags |= LIB$M_FIL_LONG_NAMES;
 #endif
@@ -93,13 +99,7 @@ const char *LP_find_file(LP_DIR_CTX **ctx, const char *directory)
 
       filespeclen += 4;		/* "*.*;" */
 
-      if (filespeclen >
-#ifdef NAML$C_MAXRSS
-	  NAML$C_MAXRSS
-#else
-	  255
-#endif
-	  )
+      if (filespeclen > NAMX_MAXRSS)
 	{
 	  errno = ENAMETOOLONG;
 	  return 0;
@@ -115,14 +115,21 @@ const char *LP_find_file(LP_DIR_CTX **ctx, const char *directory)
 
       strcpy((*ctx)->filespec,directory);
       strcat((*ctx)->filespec,"*.*;");
+
+/* Arrange 32-bit pointer to (copied) string storage, if needed. */
+#if __INITIAL_POINTER_SIZE == 64
+# define CTX_FILESPEC ctx_filespec_32p
+        /* Copy the file name to storage with a 32-bit pointer. */
+        ctx_filespec_32p = ctx_filespec_32;
+        strcpy( ctx_filespec_32p, (*ctx)->filespec);
+#else /* __INITIAL_POINTER_SIZE == 64 */
+# define CTX_FILESPEC (*ctx)->filespec
+#endif /* __INITIAL_POINTER_SIZE == 64 [else] */
+
       (*ctx)->filespec_dsc.dsc$w_length = filespeclen;
       (*ctx)->filespec_dsc.dsc$b_dtype = DSC$K_DTYPE_T;
       (*ctx)->filespec_dsc.dsc$b_class = DSC$K_CLASS_S;
-      (*ctx)->filespec_dsc.dsc$a_pointer = (*ctx)->filespec;
-      (*ctx)->result_dsc.dsc$w_length = 0;
-      (*ctx)->result_dsc.dsc$b_dtype = DSC$K_DTYPE_T;
-      (*ctx)->result_dsc.dsc$b_class = DSC$K_CLASS_D;
-      (*ctx)->result_dsc.dsc$a_pointer = 0;
+      (*ctx)->filespec_dsc.dsc$a_pointer = CTX_FILESPEC;
     }
 
   (*ctx)->result_dsc.dsc$w_length = 0;

crypto/Makefile

@@ -74,7 +74,9 @@ x86_64cpuid.s: x86_64cpuid.pl
 	$(PERL) x86_64cpuid.pl $(PERLASM_SCHEME) > $@
 ia64cpuid.s: ia64cpuid.S
 	$(CC) $(CFLAGS) -E ia64cpuid.S > $@
-ppccpuid.s:		ppccpuid.pl;	$(PERL) ppccpuid.pl $(PERLASM_SCHEME) $@
+ppccpuid.s:	ppccpuid.pl;	$(PERL) ppccpuid.pl $(PERLASM_SCHEME) $@
+alphacpuid.s:	alphacpuid.pl
+	$(PERL) $< | $(CC) -E - | tee $@ > /dev/null
 
 testapps:
 	[ -z "$(THIS)" ] || (	if echo $(SDIRS) | fgrep ' des '; \

crypto/aes/aes_wrap.c

@@ -85,9 +85,9 @@ int AES_wrap_key(AES_KEY *key, const unsigned char *iv,
 			A[7] ^= (unsigned char)(t & 0xff);
 			if (t > 0xff)	
 				{
-				A[6] ^= (unsigned char)((t & 0xff) >> 8);
-				A[5] ^= (unsigned char)((t & 0xff) >> 16);
-				A[4] ^= (unsigned char)((t & 0xff) >> 24);
+				A[6] ^= (unsigned char)((t >> 8) & 0xff);
+				A[5] ^= (unsigned char)((t >> 16) & 0xff);
+				A[4] ^= (unsigned char)((t >> 24) & 0xff);
 				}
 			memcpy(R, B + 8, 8);
 			}
@@ -119,9 +119,9 @@ int AES_unwrap_key(AES_KEY *key, const unsigned char *iv,
 			A[7] ^= (unsigned char)(t & 0xff);
 			if (t > 0xff)	
 				{
-				A[6] ^= (unsigned char)((t & 0xff) >> 8);
-				A[5] ^= (unsigned char)((t & 0xff) >> 16);
-				A[4] ^= (unsigned char)((t & 0xff) >> 24);
+				A[6] ^= (unsigned char)((t >> 8) & 0xff);
+				A[5] ^= (unsigned char)((t >> 16) & 0xff);
+				A[4] ^= (unsigned char)((t >> 24) & 0xff);
 				}
 			memcpy(B + 8, R, 8);
 			AES_decrypt(B, B, key);

crypto/aes/asm/aes-armv4.pl

@@ -16,12 +16,20 @@
 # allows to merge logical or arithmetic operation with shift or rotate
 # in one instruction and emit combined result every cycle. The module
 # is endian-neutral. The performance is ~42 cycles/byte for 128-bit
-# key.
+# key [on single-issue Xscale PXA250 core].
 
 # May 2007.
 #
 # AES_set_[en|de]crypt_key is added.
 
+# July 2010.
+#
+# Rescheduling for dual-issue pipeline resulted in 12% improvement on
+# Cortex A8 core and ~25 cycles per byte processed with 128-bit key.
+
+while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
+open STDOUT,">$output";
+
 $s0="r0";
 $s1="r1";
 $s2="r2";
@@ -164,24 +172,24 @@ AES_encrypt:
 	ldrb	$t2,[$rounds,#1]
 	ldrb	$t3,[$rounds,#0]
 	orr	$s0,$s0,$t1,lsl#8
-	orr	$s0,$s0,$t2,lsl#16
-	orr	$s0,$s0,$t3,lsl#24
 	ldrb	$s1,[$rounds,#7]
+	orr	$s0,$s0,$t2,lsl#16
 	ldrb	$t1,[$rounds,#6]
+	orr	$s0,$s0,$t3,lsl#24
 	ldrb	$t2,[$rounds,#5]
 	ldrb	$t3,[$rounds,#4]
 	orr	$s1,$s1,$t1,lsl#8
-	orr	$s1,$s1,$t2,lsl#16
-	orr	$s1,$s1,$t3,lsl#24
 	ldrb	$s2,[$rounds,#11]
+	orr	$s1,$s1,$t2,lsl#16
 	ldrb	$t1,[$rounds,#10]
+	orr	$s1,$s1,$t3,lsl#24
 	ldrb	$t2,[$rounds,#9]
 	ldrb	$t3,[$rounds,#8]
 	orr	$s2,$s2,$t1,lsl#8
-	orr	$s2,$s2,$t2,lsl#16
-	orr	$s2,$s2,$t3,lsl#24
 	ldrb	$s3,[$rounds,#15]
+	orr	$s2,$s2,$t2,lsl#16
 	ldrb	$t1,[$rounds,#14]
+	orr	$s2,$s2,$t3,lsl#24
 	ldrb	$t2,[$rounds,#13]
 	ldrb	$t3,[$rounds,#12]
 	orr	$s3,$s3,$t1,lsl#8
@@ -196,24 +204,24 @@ AES_encrypt:
 	mov	$t3,$s0,lsr#8
 	strb	$t1,[$rounds,#0]
 	strb	$t2,[$rounds,#1]
-	strb	$t3,[$rounds,#2]
-	strb	$s0,[$rounds,#3]
 	mov	$t1,$s1,lsr#24
+	strb	$t3,[$rounds,#2]
 	mov	$t2,$s1,lsr#16
+	strb	$s0,[$rounds,#3]
 	mov	$t3,$s1,lsr#8
 	strb	$t1,[$rounds,#4]
 	strb	$t2,[$rounds,#5]
-	strb	$t3,[$rounds,#6]
-	strb	$s1,[$rounds,#7]
 	mov	$t1,$s2,lsr#24
+	strb	$t3,[$rounds,#6]
 	mov	$t2,$s2,lsr#16
+	strb	$s1,[$rounds,#7]
 	mov	$t3,$s2,lsr#8
 	strb	$t1,[$rounds,#8]
 	strb	$t2,[$rounds,#9]
-	strb	$t3,[$rounds,#10]
-	strb	$s2,[$rounds,#11]
 	mov	$t1,$s3,lsr#24
+	strb	$t3,[$rounds,#10]
 	mov	$t2,$s3,lsr#16
+	strb	$s2,[$rounds,#11]
 	mov	$t3,$s3,lsr#8
 	strb	$t1,[$rounds,#12]
 	strb	$t2,[$rounds,#13]
@@ -230,141 +238,137 @@ AES_encrypt:
 .align	2
 _armv4_AES_encrypt:
 	str	lr,[sp,#-4]!		@ push lr
-	ldr	$t1,[$key],#16
-	ldr	$t2,[$key,#-12]
-	ldr	$t3,[$key,#-8]
-	ldr	$i1,[$key,#-4]
-	ldr	$rounds,[$key,#240-16]
+	ldmia	$key!,{$t1-$i1}
 	eor	$s0,$s0,$t1
+	ldr	$rounds,[$key,#240-16]
 	eor	$s1,$s1,$t2
 	eor	$s2,$s2,$t3
 	eor	$s3,$s3,$i1
 	sub	$rounds,$rounds,#1
 	mov	lr,#255
 
-.Lenc_loop:
+	and	$i1,lr,$s0
 	and	$i2,lr,$s0,lsr#8
 	and	$i3,lr,$s0,lsr#16
-	and	$i1,lr,$s0
 	mov	$s0,$s0,lsr#24
+.Lenc_loop:
 	ldr	$t1,[$tbl,$i1,lsl#2]	@ Te3[s0>>0]
-	ldr	$s0,[$tbl,$s0,lsl#2]	@ Te0[s0>>24]
-	ldr	$t2,[$tbl,$i2,lsl#2]	@ Te2[s0>>8]
-	ldr	$t3,[$tbl,$i3,lsl#2]	@ Te1[s0>>16]
-
 	and	$i1,lr,$s1,lsr#16	@ i0
+	ldr	$t2,[$tbl,$i2,lsl#2]	@ Te2[s0>>8]
 	and	$i2,lr,$s1
+	ldr	$t3,[$tbl,$i3,lsl#2]	@ Te1[s0>>16]
 	and	$i3,lr,$s1,lsr#8
+	ldr	$s0,[$tbl,$s0,lsl#2]	@ Te0[s0>>24]
 	mov	$s1,$s1,lsr#24
+
 	ldr	$i1,[$tbl,$i1,lsl#2]	@ Te1[s1>>16]
-	ldr	$s1,[$tbl,$s1,lsl#2]	@ Te0[s1>>24]
 	ldr	$i2,[$tbl,$i2,lsl#2]	@ Te3[s1>>0]
 	ldr	$i3,[$tbl,$i3,lsl#2]	@ Te2[s1>>8]
 	eor	$s0,$s0,$i1,ror#8
-	eor	$s1,$s1,$t1,ror#24
-	eor	$t2,$t2,$i2,ror#8
-	eor	$t3,$t3,$i3,ror#8
-
+	ldr	$s1,[$tbl,$s1,lsl#2]	@ Te0[s1>>24]
 	and	$i1,lr,$s2,lsr#8	@ i0
+	eor	$t2,$t2,$i2,ror#8
 	and	$i2,lr,$s2,lsr#16	@ i1
+	eor	$t3,$t3,$i3,ror#8
 	and	$i3,lr,$s2
-	mov	$s2,$s2,lsr#24
+	eor	$s1,$s1,$t1,ror#24
 	ldr	$i1,[$tbl,$i1,lsl#2]	@ Te2[s2>>8]
+	mov	$s2,$s2,lsr#24
+
 	ldr	$i2,[$tbl,$i2,lsl#2]	@ Te1[s2>>16]
-	ldr	$s2,[$tbl,$s2,lsl#2]	@ Te0[s2>>24]
 	ldr	$i3,[$tbl,$i3,lsl#2]	@ Te3[s2>>0]
 	eor	$s0,$s0,$i1,ror#16
-	eor	$s1,$s1,$i2,ror#8
-	eor	$s2,$s2,$t2,ror#16
-	eor	$t3,$t3,$i3,ror#16
-
+	ldr	$s2,[$tbl,$s2,lsl#2]	@ Te0[s2>>24]
 	and	$i1,lr,$s3		@ i0
+	eor	$s1,$s1,$i2,ror#8
 	and	$i2,lr,$s3,lsr#8	@ i1
+	eor	$t3,$t3,$i3,ror#16
 	and	$i3,lr,$s3,lsr#16	@ i2
-	mov	$s3,$s3,lsr#24
+	eor	$s2,$s2,$t2,ror#16
 	ldr	$i1,[$tbl,$i1,lsl#2]	@ Te3[s3>>0]
+	mov	$s3,$s3,lsr#24
+
 	ldr	$i2,[$tbl,$i2,lsl#2]	@ Te2[s3>>8]
 	ldr	$i3,[$tbl,$i3,lsl#2]	@ Te1[s3>>16]
-	ldr	$s3,[$tbl,$s3,lsl#2]	@ Te0[s3>>24]
 	eor	$s0,$s0,$i1,ror#24
+	ldr	$s3,[$tbl,$s3,lsl#2]	@ Te0[s3>>24]
 	eor	$s1,$s1,$i2,ror#16
+	ldr	$i1,[$key],#16
 	eor	$s2,$s2,$i3,ror#8
+	ldr	$t1,[$key,#-12]
 	eor	$s3,$s3,$t3,ror#8
 
-	ldr	$t1,[$key],#16
-	ldr	$t2,[$key,#-12]
-	ldr	$t3,[$key,#-8]
-	ldr	$i1,[$key,#-4]
-	eor	$s0,$s0,$t1
-	eor	$s1,$s1,$t2
-	eor	$s2,$s2,$t3
-	eor	$s3,$s3,$i1
+	ldr	$t2,[$key,#-8]
+	eor	$s0,$s0,$i1
+	ldr	$t3,[$key,#-4]
+	and	$i1,lr,$s0
+	eor	$s1,$s1,$t1
+	and	$i2,lr,$s0,lsr#8
+	eor	$s2,$s2,$t2
+	and	$i3,lr,$s0,lsr#16
+	eor	$s3,$s3,$t3
+	mov	$s0,$s0,lsr#24
 
 	subs	$rounds,$rounds,#1
 	bne	.Lenc_loop
 
 	add	$tbl,$tbl,#2
 
-	and	$i1,lr,$s0
-	and	$i2,lr,$s0,lsr#8
-	and	$i3,lr,$s0,lsr#16
-	mov	$s0,$s0,lsr#24
 	ldrb	$t1,[$tbl,$i1,lsl#2]	@ Te4[s0>>0]
-	ldrb	$s0,[$tbl,$s0,lsl#2]	@ Te4[s0>>24]
-	ldrb	$t2,[$tbl,$i2,lsl#2]	@ Te4[s0>>8]
-	ldrb	$t3,[$tbl,$i3,lsl#2]	@ Te4[s0>>16]
-
 	and	$i1,lr,$s1,lsr#16	@ i0
+	ldrb	$t2,[$tbl,$i2,lsl#2]	@ Te4[s0>>8]
 	and	$i2,lr,$s1
+	ldrb	$t3,[$tbl,$i3,lsl#2]	@ Te4[s0>>16]
 	and	$i3,lr,$s1,lsr#8
+	ldrb	$s0,[$tbl,$s0,lsl#2]	@ Te4[s0>>24]
 	mov	$s1,$s1,lsr#24
+
 	ldrb	$i1,[$tbl,$i1,lsl#2]	@ Te4[s1>>16]
-	ldrb	$s1,[$tbl,$s1,lsl#2]	@ Te4[s1>>24]
 	ldrb	$i2,[$tbl,$i2,lsl#2]	@ Te4[s1>>0]
 	ldrb	$i3,[$tbl,$i3,lsl#2]	@ Te4[s1>>8]
 	eor	$s0,$i1,$s0,lsl#8
-	eor	$s1,$t1,$s1,lsl#24
-	eor	$t2,$i2,$t2,lsl#8
-	eor	$t3,$i3,$t3,lsl#8
-
+	ldrb	$s1,[$tbl,$s1,lsl#2]	@ Te4[s1>>24]
 	and	$i1,lr,$s2,lsr#8	@ i0
+	eor	$t2,$i2,$t2,lsl#8
 	and	$i2,lr,$s2,lsr#16	@ i1
+	eor	$t3,$i3,$t3,lsl#8
 	and	$i3,lr,$s2
-	mov	$s2,$s2,lsr#24
+	eor	$s1,$t1,$s1,lsl#24
 	ldrb	$i1,[$tbl,$i1,lsl#2]	@ Te4[s2>>8]
+	mov	$s2,$s2,lsr#24
+
 	ldrb	$i2,[$tbl,$i2,lsl#2]	@ Te4[s2>>16]
-	ldrb	$s2,[$tbl,$s2,lsl#2]	@ Te4[s2>>24]
 	ldrb	$i3,[$tbl,$i3,lsl#2]	@ Te4[s2>>0]
 	eor	$s0,$i1,$s0,lsl#8
-	eor	$s1,$s1,$i2,lsl#16
-	eor	$s2,$t2,$s2,lsl#24
-	eor	$t3,$i3,$t3,lsl#8
-
+	ldrb	$s2,[$tbl,$s2,lsl#2]	@ Te4[s2>>24]
 	and	$i1,lr,$s3		@ i0
+	eor	$s1,$s1,$i2,lsl#16
 	and	$i2,lr,$s3,lsr#8	@ i1
+	eor	$t3,$i3,$t3,lsl#8
 	and	$i3,lr,$s3,lsr#16	@ i2
-	mov	$s3,$s3,lsr#24
+	eor	$s2,$t2,$s2,lsl#24
 	ldrb	$i1,[$tbl,$i1,lsl#2]	@ Te4[s3>>0]
+	mov	$s3,$s3,lsr#24
+
 	ldrb	$i2,[$tbl,$i2,lsl#2]	@ Te4[s3>>8]
 	ldrb	$i3,[$tbl,$i3,lsl#2]	@ Te4[s3>>16]
-	ldrb	$s3,[$tbl,$s3,lsl#2]	@ Te4[s3>>24]
 	eor	$s0,$i1,$s0,lsl#8
+	ldrb	$s3,[$tbl,$s3,lsl#2]	@ Te4[s3>>24]
+	ldr	$i1,[$key,#0]
 	eor	$s1,$s1,$i2,lsl#8
+	ldr	$t1,[$key,#4]
 	eor	$s2,$s2,$i3,lsl#16
+	ldr	$t2,[$key,#8]
 	eor	$s3,$t3,$s3,lsl#24
+	ldr	$t3,[$key,#12]
 
-	ldr	lr,[sp],#4		@ pop lr
-	ldr	$t1,[$key,#0]
-	ldr	$t2,[$key,#4]
-	ldr	$t3,[$key,#8]
-	ldr	$i1,[$key,#12]
-	eor	$s0,$s0,$t1
-	eor	$s1,$s1,$t2
-	eor	$s2,$s2,$t3
-	eor	$s3,$s3,$i1
+	eor	$s0,$s0,$i1
+	eor	$s1,$s1,$t1
+	eor	$s2,$s2,$t2
+	eor	$s3,$s3,$t3
 
 	sub	$tbl,$tbl,#2
-	mov	pc,lr			@ return
+	ldr	pc,[sp],#4		@ pop and return
 .size	_armv4_AES_encrypt,.-_armv4_AES_encrypt
 
 .global AES_set_encrypt_key
@@ -399,31 +403,31 @@ AES_set_encrypt_key:
 	ldrb	$t2,[$rounds,#1]
 	ldrb	$t3,[$rounds,#0]
 	orr	$s0,$s0,$t1,lsl#8
-	orr	$s0,$s0,$t2,lsl#16
-	orr	$s0,$s0,$t3,lsl#24
 	ldrb	$s1,[$rounds,#7]
+	orr	$s0,$s0,$t2,lsl#16
 	ldrb	$t1,[$rounds,#6]
+	orr	$s0,$s0,$t3,lsl#24
 	ldrb	$t2,[$rounds,#5]
 	ldrb	$t3,[$rounds,#4]
 	orr	$s1,$s1,$t1,lsl#8
-	orr	$s1,$s1,$t2,lsl#16
-	orr	$s1,$s1,$t3,lsl#24
 	ldrb	$s2,[$rounds,#11]
+	orr	$s1,$s1,$t2,lsl#16
 	ldrb	$t1,[$rounds,#10]
+	orr	$s1,$s1,$t3,lsl#24
 	ldrb	$t2,[$rounds,#9]
 	ldrb	$t3,[$rounds,#8]
 	orr	$s2,$s2,$t1,lsl#8
-	orr	$s2,$s2,$t2,lsl#16
-	orr	$s2,$s2,$t3,lsl#24
 	ldrb	$s3,[$rounds,#15]
+	orr	$s2,$s2,$t2,lsl#16
 	ldrb	$t1,[$rounds,#14]
+	orr	$s2,$s2,$t3,lsl#24
 	ldrb	$t2,[$rounds,#13]
 	ldrb	$t3,[$rounds,#12]
 	orr	$s3,$s3,$t1,lsl#8
-	orr	$s3,$s3,$t2,lsl#16
-	orr	$s3,$s3,$t3,lsl#24
 	str	$s0,[$key],#16
+	orr	$s3,$s3,$t2,lsl#16
 	str	$s1,[$key,#-12]
+	orr	$s3,$s3,$t3,lsl#24
 	str	$s2,[$key,#-8]
 	str	$s3,[$key,#-4]
 
@@ -437,27 +441,26 @@ AES_set_encrypt_key:
 .L128_loop:
 	and	$t2,lr,$s3,lsr#24
 	and	$i1,lr,$s3,lsr#16
-	and	$i2,lr,$s3,lsr#8
-	and	$i3,lr,$s3
 	ldrb	$t2,[$tbl,$t2]
+	and	$i2,lr,$s3,lsr#8
 	ldrb	$i1,[$tbl,$i1]
+	and	$i3,lr,$s3
 	ldrb	$i2,[$tbl,$i2]
-	ldrb	$i3,[$tbl,$i3]
-	ldr	$t1,[$t3],#4			@ rcon[i++]
 	orr	$t2,$t2,$i1,lsl#24
+	ldrb	$i3,[$tbl,$i3]
 	orr	$t2,$t2,$i2,lsl#16
+	ldr	$t1,[$t3],#4			@ rcon[i++]
 	orr	$t2,$t2,$i3,lsl#8
 	eor	$t2,$t2,$t1
 	eor	$s0,$s0,$t2			@ rk[4]=rk[0]^...
 	eor	$s1,$s1,$s0			@ rk[5]=rk[1]^rk[4]
-	eor	$s2,$s2,$s1			@ rk[6]=rk[2]^rk[5]
-	eor	$s3,$s3,$s2			@ rk[7]=rk[3]^rk[6]
 	str	$s0,[$key],#16
+	eor	$s2,$s2,$s1			@ rk[6]=rk[2]^rk[5]
 	str	$s1,[$key,#-12]
+	eor	$s3,$s3,$s2			@ rk[7]=rk[3]^rk[6]
 	str	$s2,[$key,#-8]
-	str	$s3,[$key,#-4]
-
 	subs	$rounds,$rounds,#1
+	str	$s3,[$key,#-4]
 	bne	.L128_loop
 	sub	r2,$key,#176
 	b	.Ldone
@@ -468,16 +471,16 @@ AES_set_encrypt_key:
 	ldrb	$t2,[$rounds,#17]
 	ldrb	$t3,[$rounds,#16]
 	orr	$i2,$i2,$t1,lsl#8
-	orr	$i2,$i2,$t2,lsl#16
-	orr	$i2,$i2,$t3,lsl#24
 	ldrb	$i3,[$rounds,#23]
+	orr	$i2,$i2,$t2,lsl#16
 	ldrb	$t1,[$rounds,#22]
+	orr	$i2,$i2,$t3,lsl#24
 	ldrb	$t2,[$rounds,#21]
 	ldrb	$t3,[$rounds,#20]
 	orr	$i3,$i3,$t1,lsl#8
 	orr	$i3,$i3,$t2,lsl#16
-	orr	$i3,$i3,$t3,lsl#24
 	str	$i2,[$key],#8
+	orr	$i3,$i3,$t3,lsl#24
 	str	$i3,[$key,#-4]
 
 	teq	lr,#192
@@ -491,27 +494,26 @@ AES_set_encrypt_key:
 .L192_loop:
 	and	$t2,lr,$i3,lsr#24
 	and	$i1,lr,$i3,lsr#16
-	and	$i2,lr,$i3,lsr#8
-	and	$i3,lr,$i3
 	ldrb	$t2,[$tbl,$t2]
+	and	$i2,lr,$i3,lsr#8
 	ldrb	$i1,[$tbl,$i1]
+	and	$i3,lr,$i3
 	ldrb	$i2,[$tbl,$i2]
-	ldrb	$i3,[$tbl,$i3]
-	ldr	$t1,[$t3],#4			@ rcon[i++]
 	orr	$t2,$t2,$i1,lsl#24
+	ldrb	$i3,[$tbl,$i3]
 	orr	$t2,$t2,$i2,lsl#16
+	ldr	$t1,[$t3],#4			@ rcon[i++]
 	orr	$t2,$t2,$i3,lsl#8
 	eor	$i3,$t2,$t1
 	eor	$s0,$s0,$i3			@ rk[6]=rk[0]^...
 	eor	$s1,$s1,$s0			@ rk[7]=rk[1]^rk[6]
-	eor	$s2,$s2,$s1			@ rk[8]=rk[2]^rk[7]
-	eor	$s3,$s3,$s2			@ rk[9]=rk[3]^rk[8]
 	str	$s0,[$key],#24
+	eor	$s2,$s2,$s1			@ rk[8]=rk[2]^rk[7]
 	str	$s1,[$key,#-20]
+	eor	$s3,$s3,$s2			@ rk[9]=rk[3]^rk[8]
 	str	$s2,[$key,#-16]
-	str	$s3,[$key,#-12]
-
 	subs	$rounds,$rounds,#1
+	str	$s3,[$key,#-12]
 	subeq	r2,$key,#216
 	beq	.Ldone
 
@@ -529,16 +531,16 @@ AES_set_encrypt_key:
 	ldrb	$t2,[$rounds,#25]
 	ldrb	$t3,[$rounds,#24]
 	orr	$i2,$i2,$t1,lsl#8
-	orr	$i2,$i2,$t2,lsl#16
-	orr	$i2,$i2,$t3,lsl#24
 	ldrb	$i3,[$rounds,#31]
+	orr	$i2,$i2,$t2,lsl#16
 	ldrb	$t1,[$rounds,#30]
+	orr	$i2,$i2,$t3,lsl#24
 	ldrb	$t2,[$rounds,#29]
 	ldrb	$t3,[$rounds,#28]
 	orr	$i3,$i3,$t1,lsl#8
 	orr	$i3,$i3,$t2,lsl#16
-	orr	$i3,$i3,$t3,lsl#24
 	str	$i2,[$key],#8
+	orr	$i3,$i3,$t3,lsl#24
 	str	$i3,[$key,#-4]
 
 	mov	$rounds,#14
@@ -550,52 +552,51 @@ AES_set_encrypt_key:
 .L256_loop:
 	and	$t2,lr,$i3,lsr#24
 	and	$i1,lr,$i3,lsr#16
-	and	$i2,lr,$i3,lsr#8
-	and	$i3,lr,$i3
 	ldrb	$t2,[$tbl,$t2]
+	and	$i2,lr,$i3,lsr#8
 	ldrb	$i1,[$tbl,$i1]
+	and	$i3,lr,$i3
 	ldrb	$i2,[$tbl,$i2]
-	ldrb	$i3,[$tbl,$i3]
-	ldr	$t1,[$t3],#4			@ rcon[i++]
 	orr	$t2,$t2,$i1,lsl#24
+	ldrb	$i3,[$tbl,$i3]
 	orr	$t2,$t2,$i2,lsl#16
+	ldr	$t1,[$t3],#4			@ rcon[i++]
 	orr	$t2,$t2,$i3,lsl#8
 	eor	$i3,$t2,$t1
 	eor	$s0,$s0,$i3			@ rk[8]=rk[0]^...
 	eor	$s1,$s1,$s0			@ rk[9]=rk[1]^rk[8]
-	eor	$s2,$s2,$s1			@ rk[10]=rk[2]^rk[9]
-	eor	$s3,$s3,$s2			@ rk[11]=rk[3]^rk[10]
 	str	$s0,[$key],#32
+	eor	$s2,$s2,$s1			@ rk[10]=rk[2]^rk[9]
 	str	$s1,[$key,#-28]
+	eor	$s3,$s3,$s2			@ rk[11]=rk[3]^rk[10]
 	str	$s2,[$key,#-24]
-	str	$s3,[$key,#-20]
-
 	subs	$rounds,$rounds,#1
+	str	$s3,[$key,#-20]
 	subeq	r2,$key,#256
 	beq	.Ldone
 
 	and	$t2,lr,$s3
 	and	$i1,lr,$s3,lsr#8
-	and	$i2,lr,$s3,lsr#16
-	and	$i3,lr,$s3,lsr#24
 	ldrb	$t2,[$tbl,$t2]
+	and	$i2,lr,$s3,lsr#16
 	ldrb	$i1,[$tbl,$i1]
+	and	$i3,lr,$s3,lsr#24
 	ldrb	$i2,[$tbl,$i2]
-	ldrb	$i3,[$tbl,$i3]
 	orr	$t2,$t2,$i1,lsl#8
+	ldrb	$i3,[$tbl,$i3]
 	orr	$t2,$t2,$i2,lsl#16
+	ldr	$t1,[$key,#-48]
 	orr	$t2,$t2,$i3,lsl#24
 
-	ldr	$t1,[$key,#-48]
 	ldr	$i1,[$key,#-44]
 	ldr	$i2,[$key,#-40]
-	ldr	$i3,[$key,#-36]
 	eor	$t1,$t1,$t2			@ rk[12]=rk[4]^...
+	ldr	$i3,[$key,#-36]
 	eor	$i1,$i1,$t1			@ rk[13]=rk[5]^rk[12]
-	eor	$i2,$i2,$i1			@ rk[14]=rk[6]^rk[13]
-	eor	$i3,$i3,$i2			@ rk[15]=rk[7]^rk[14]
 	str	$t1,[$key,#-16]
+	eor	$i2,$i2,$i1			@ rk[14]=rk[6]^rk[13]
 	str	$i1,[$key,#-12]
+	eor	$i3,$i3,$i2			@ rk[15]=rk[7]^rk[14]
 	str	$i2,[$key,#-8]
 	str	$i3,[$key,#-4]
 	b	.L256_loop
@@ -816,24 +817,24 @@ AES_decrypt:
 	ldrb	$t2,[$rounds,#1]
 	ldrb	$t3,[$rounds,#0]
 	orr	$s0,$s0,$t1,lsl#8
-	orr	$s0,$s0,$t2,lsl#16
-	orr	$s0,$s0,$t3,lsl#24
 	ldrb	$s1,[$rounds,#7]
+	orr	$s0,$s0,$t2,lsl#16
 	ldrb	$t1,[$rounds,#6]
+	orr	$s0,$s0,$t3,lsl#24
 	ldrb	$t2,[$rounds,#5]
 	ldrb	$t3,[$rounds,#4]
 	orr	$s1,$s1,$t1,lsl#8
-	orr	$s1,$s1,$t2,lsl#16
-	orr	$s1,$s1,$t3,lsl#24
 	ldrb	$s2,[$rounds,#11]
+	orr	$s1,$s1,$t2,lsl#16
 	ldrb	$t1,[$rounds,#10]
+	orr	$s1,$s1,$t3,lsl#24
 	ldrb	$t2,[$rounds,#9]
 	ldrb	$t3,[$rounds,#8]
 	orr	$s2,$s2,$t1,lsl#8
-	orr	$s2,$s2,$t2,lsl#16
-	orr	$s2,$s2,$t3,lsl#24
 	ldrb	$s3,[$rounds,#15]
+	orr	$s2,$s2,$t2,lsl#16
 	ldrb	$t1,[$rounds,#14]
+	orr	$s2,$s2,$t3,lsl#24
 	ldrb	$t2,[$rounds,#13]
 	ldrb	$t3,[$rounds,#12]
 	orr	$s3,$s3,$t1,lsl#8
@@ -848,24 +849,24 @@ AES_decrypt:
 	mov	$t3,$s0,lsr#8
 	strb	$t1,[$rounds,#0]
 	strb	$t2,[$rounds,#1]
-	strb	$t3,[$rounds,#2]
-	strb	$s0,[$rounds,#3]
 	mov	$t1,$s1,lsr#24
+	strb	$t3,[$rounds,#2]
 	mov	$t2,$s1,lsr#16
+	strb	$s0,[$rounds,#3]
 	mov	$t3,$s1,lsr#8
 	strb	$t1,[$rounds,#4]
 	strb	$t2,[$rounds,#5]
-	strb	$t3,[$rounds,#6]
-	strb	$s1,[$rounds,#7]
 	mov	$t1,$s2,lsr#24
+	strb	$t3,[$rounds,#6]
 	mov	$t2,$s2,lsr#16
+	strb	$s1,[$rounds,#7]
 	mov	$t3,$s2,lsr#8
 	strb	$t1,[$rounds,#8]
 	strb	$t2,[$rounds,#9]
-	strb	$t3,[$rounds,#10]
-	strb	$s2,[$rounds,#11]
 	mov	$t1,$s3,lsr#24
+	strb	$t3,[$rounds,#10]
 	mov	$t2,$s3,lsr#16
+	strb	$s2,[$rounds,#11]
 	mov	$t3,$s3,lsr#8
 	strb	$t1,[$rounds,#12]
 	strb	$t2,[$rounds,#13]
@@ -882,146 +883,143 @@ AES_decrypt:
 .align	2
 _armv4_AES_decrypt:
 	str	lr,[sp,#-4]!		@ push lr
-	ldr	$t1,[$key],#16
-	ldr	$t2,[$key,#-12]
-	ldr	$t3,[$key,#-8]
-	ldr	$i1,[$key,#-4]
-	ldr	$rounds,[$key,#240-16]
+	ldmia	$key!,{$t1-$i1}
 	eor	$s0,$s0,$t1
+	ldr	$rounds,[$key,#240-16]
 	eor	$s1,$s1,$t2
 	eor	$s2,$s2,$t3
 	eor	$s3,$s3,$i1
 	sub	$rounds,$rounds,#1
 	mov	lr,#255
 
-.Ldec_loop:
 	and	$i1,lr,$s0,lsr#16
 	and	$i2,lr,$s0,lsr#8
 	and	$i3,lr,$s0
 	mov	$s0,$s0,lsr#24
+.Ldec_loop:
 	ldr	$t1,[$tbl,$i1,lsl#2]	@ Td1[s0>>16]
-	ldr	$s0,[$tbl,$s0,lsl#2]	@ Td0[s0>>24]
-	ldr	$t2,[$tbl,$i2,lsl#2]	@ Td2[s0>>8]
-	ldr	$t3,[$tbl,$i3,lsl#2]	@ Td3[s0>>0]
-
 	and	$i1,lr,$s1		@ i0
+	ldr	$t2,[$tbl,$i2,lsl#2]	@ Td2[s0>>8]
 	and	$i2,lr,$s1,lsr#16
+	ldr	$t3,[$tbl,$i3,lsl#2]	@ Td3[s0>>0]
 	and	$i3,lr,$s1,lsr#8
+	ldr	$s0,[$tbl,$s0,lsl#2]	@ Td0[s0>>24]
 	mov	$s1,$s1,lsr#24
+
 	ldr	$i1,[$tbl,$i1,lsl#2]	@ Td3[s1>>0]
-	ldr	$s1,[$tbl,$s1,lsl#2]	@ Td0[s1>>24]
 	ldr	$i2,[$tbl,$i2,lsl#2]	@ Td1[s1>>16]
 	ldr	$i3,[$tbl,$i3,lsl#2]	@ Td2[s1>>8]
 	eor	$s0,$s0,$i1,ror#24
-	eor	$s1,$s1,$t1,ror#8
-	eor	$t2,$i2,$t2,ror#8
-	eor	$t3,$i3,$t3,ror#8
-
+	ldr	$s1,[$tbl,$s1,lsl#2]	@ Td0[s1>>24]
 	and	$i1,lr,$s2,lsr#8	@ i0
+	eor	$t2,$i2,$t2,ror#8
 	and	$i2,lr,$s2		@ i1
+	eor	$t3,$i3,$t3,ror#8
 	and	$i3,lr,$s2,lsr#16
-	mov	$s2,$s2,lsr#24
+	eor	$s1,$s1,$t1,ror#8
 	ldr	$i1,[$tbl,$i1,lsl#2]	@ Td2[s2>>8]
+	mov	$s2,$s2,lsr#24
+
 	ldr	$i2,[$tbl,$i2,lsl#2]	@ Td3[s2>>0]
-	ldr	$s2,[$tbl,$s2,lsl#2]	@ Td0[s2>>24]
 	ldr	$i3,[$tbl,$i3,lsl#2]	@ Td1[s2>>16]
 	eor	$s0,$s0,$i1,ror#16
-	eor	$s1,$s1,$i2,ror#24
-	eor	$s2,$s2,$t2,ror#8
-	eor	$t3,$i3,$t3,ror#8
-
+	ldr	$s2,[$tbl,$s2,lsl#2]	@ Td0[s2>>24]
 	and	$i1,lr,$s3,lsr#16	@ i0
+	eor	$s1,$s1,$i2,ror#24
 	and	$i2,lr,$s3,lsr#8	@ i1
+	eor	$t3,$i3,$t3,ror#8
 	and	$i3,lr,$s3		@ i2
-	mov	$s3,$s3,lsr#24
+	eor	$s2,$s2,$t2,ror#8
 	ldr	$i1,[$tbl,$i1,lsl#2]	@ Td1[s3>>16]
+	mov	$s3,$s3,lsr#24
+
 	ldr	$i2,[$tbl,$i2,lsl#2]	@ Td2[s3>>8]
 	ldr	$i3,[$tbl,$i3,lsl#2]	@ Td3[s3>>0]
-	ldr	$s3,[$tbl,$s3,lsl#2]	@ Td0[s3>>24]
 	eor	$s0,$s0,$i1,ror#8
+	ldr	$s3,[$tbl,$s3,lsl#2]	@ Td0[s3>>24]
 	eor	$s1,$s1,$i2,ror#16
 	eor	$s2,$s2,$i3,ror#24
+	ldr	$i1,[$key],#16
 	eor	$s3,$s3,$t3,ror#8
 
-	ldr	$t1,[$key],#16
-	ldr	$t2,[$key,#-12]
-	ldr	$t3,[$key,#-8]
-	ldr	$i1,[$key,#-4]
-	eor	$s0,$s0,$t1
-	eor	$s1,$s1,$t2
-	eor	$s2,$s2,$t3
-	eor	$s3,$s3,$i1
+	ldr	$t1,[$key,#-12]
+	ldr	$t2,[$key,#-8]
+	eor	$s0,$s0,$i1
+	ldr	$t3,[$key,#-4]
+	and	$i1,lr,$s0,lsr#16
+	eor	$s1,$s1,$t1
+	and	$i2,lr,$s0,lsr#8
+	eor	$s2,$s2,$t2
+	and	$i3,lr,$s0
+	eor	$s3,$s3,$t3
+	mov	$s0,$s0,lsr#24
 
 	subs	$rounds,$rounds,#1
 	bne	.Ldec_loop
 
 	add	$tbl,$tbl,#1024
 
-	ldr	$t1,[$tbl,#0]		@ prefetch Td4
-	ldr	$t2,[$tbl,#32]
-	ldr	$t3,[$tbl,#64]
-	ldr	$i1,[$tbl,#96]
-	ldr	$i2,[$tbl,#128]
-	ldr	$i3,[$tbl,#160]
-	ldr	$t1,[$tbl,#192]
-	ldr	$t2,[$tbl,#224]
+	ldr	$t2,[$tbl,#0]		@ prefetch Td4
+	ldr	$t3,[$tbl,#32]
+	ldr	$t1,[$tbl,#64]
+	ldr	$t2,[$tbl,#96]
+	ldr	$t3,[$tbl,#128]
+	ldr	$t1,[$tbl,#160]
+	ldr	$t2,[$tbl,#192]
+	ldr	$t3,[$tbl,#224]
 
-	and	$i1,lr,$s0,lsr#16
-	and	$i2,lr,$s0,lsr#8
-	and	$i3,lr,$s0
-	ldrb	$s0,[$tbl,$s0,lsr#24]	@ Td4[s0>>24]
+	ldrb	$s0,[$tbl,$s0]		@ Td4[s0>>24]
 	ldrb	$t1,[$tbl,$i1]		@ Td4[s0>>16]
-	ldrb	$t2,[$tbl,$i2]		@ Td4[s0>>8]
-	ldrb	$t3,[$tbl,$i3]		@ Td4[s0>>0]
-
 	and	$i1,lr,$s1		@ i0
+	ldrb	$t2,[$tbl,$i2]		@ Td4[s0>>8]
 	and	$i2,lr,$s1,lsr#16
+	ldrb	$t3,[$tbl,$i3]		@ Td4[s0>>0]
 	and	$i3,lr,$s1,lsr#8
+
 	ldrb	$i1,[$tbl,$i1]		@ Td4[s1>>0]
 	ldrb	$s1,[$tbl,$s1,lsr#24]	@ Td4[s1>>24]
 	ldrb	$i2,[$tbl,$i2]		@ Td4[s1>>16]
-	ldrb	$i3,[$tbl,$i3]		@ Td4[s1>>8]
 	eor	$s0,$i1,$s0,lsl#24
+	ldrb	$i3,[$tbl,$i3]		@ Td4[s1>>8]
 	eor	$s1,$t1,$s1,lsl#8
-	eor	$t2,$t2,$i2,lsl#8
-	eor	$t3,$t3,$i3,lsl#8
-
 	and	$i1,lr,$s2,lsr#8	@ i0
+	eor	$t2,$t2,$i2,lsl#8
 	and	$i2,lr,$s2		@ i1
-	and	$i3,lr,$s2,lsr#16
+	eor	$t3,$t3,$i3,lsl#8
 	ldrb	$i1,[$tbl,$i1]		@ Td4[s2>>8]
+	and	$i3,lr,$s2,lsr#16
+
 	ldrb	$i2,[$tbl,$i2]		@ Td4[s2>>0]
 	ldrb	$s2,[$tbl,$s2,lsr#24]	@ Td4[s2>>24]
-	ldrb	$i3,[$tbl,$i3]		@ Td4[s2>>16]
 	eor	$s0,$s0,$i1,lsl#8
+	ldrb	$i3,[$tbl,$i3]		@ Td4[s2>>16]
 	eor	$s1,$i2,$s1,lsl#16
-	eor	$s2,$t2,$s2,lsl#16
-	eor	$t3,$t3,$i3,lsl#16
-
 	and	$i1,lr,$s3,lsr#16	@ i0
+	eor	$s2,$t2,$s2,lsl#16
 	and	$i2,lr,$s3,lsr#8	@ i1
-	and	$i3,lr,$s3		@ i2
+	eor	$t3,$t3,$i3,lsl#16
 	ldrb	$i1,[$tbl,$i1]		@ Td4[s3>>16]
+	and	$i3,lr,$s3		@ i2
+
 	ldrb	$i2,[$tbl,$i2]		@ Td4[s3>>8]
 	ldrb	$i3,[$tbl,$i3]		@ Td4[s3>>0]
 	ldrb	$s3,[$tbl,$s3,lsr#24]	@ Td4[s3>>24]
 	eor	$s0,$s0,$i1,lsl#16
+	ldr	$i1,[$key,#0]
 	eor	$s1,$s1,$i2,lsl#8
+	ldr	$t1,[$key,#4]
 	eor	$s2,$i3,$s2,lsl#8
+	ldr	$t2,[$key,#8]
 	eor	$s3,$t3,$s3,lsl#24
+	ldr	$t3,[$key,#12]
 
-	ldr	lr,[sp],#4		@ pop lr
-	ldr	$t1,[$key,#0]
-	ldr	$t2,[$key,#4]
-	ldr	$t3,[$key,#8]
-	ldr	$i1,[$key,#12]
-	eor	$s0,$s0,$t1
-	eor	$s1,$s1,$t2
-	eor	$s2,$s2,$t3
-	eor	$s3,$s3,$i1
+	eor	$s0,$s0,$i1
+	eor	$s1,$s1,$t1
+	eor	$s2,$s2,$t2
+	eor	$s3,$s3,$t3
 
 	sub	$tbl,$tbl,#1024
-	mov	pc,lr			@ return
+	ldr	pc,[sp],#4		@ pop and return
 .size	_armv4_AES_decrypt,.-_armv4_AES_decrypt
 .asciz	"AES for ARMv4, CRYPTOGAMS by <appro\@openssl.org>"
 .align	2
@@ -1029,3 +1027,4 @@ ___
 
 $code =~ s/\bbx\s+lr\b/.word\t0xe12fff1e/gm;	# make it possible to compile with -march=armv4
 print $code;
+close STDOUT;	# enforce flush

crypto/alphacpuid.pl

@@ -1,3 +1,5 @@
+#!/usr/bin/env perl
+print <<'___';
 .text
 
 .set	noat
@@ -68,9 +70,9 @@ OPENSSL_wipe_cpu:
 OPENSSL_atomic_add:
 	.frame	$30,0,$26
 	.prologue 0
-1:	ldl_l	$0,($16)
+1:	ldl_l	$0,0($16)
 	addl	$0,$17,$1
-	stl_c	$1,($16)
+	stl_c	$1,0($16)
 	beq	$1,1b
 	addl	$0,$17,$0
 	ret	($26)
@@ -97,19 +99,19 @@ OPENSSL_cleanse:
 	beq	$0,.Laligned
 
 .Little:
+	subq	$0,8,$0
 	ldq_u	$1,0($16)
 	mov	$16,$2
 .Lalign:
 	mskbl	$1,$16,$1
 	lda	$16,1($16)
 	subq	$17,1,$17
-	subq	$0,1,$0
+	addq	$0,1,$0
 	beq	$17,.Lout
 	bne	$0,.Lalign
 .Lout:	stq_u	$1,0($2)
 	beq	$17,.Ldone
 	bic	$17,7,$at
-	mov	$17,$0
 	beq	$at,.Little
 
 .Laligned:
@@ -118,8 +120,7 @@ OPENSSL_cleanse:
 	lda	$16,8($16)
 	bic	$17,7,$at
 	bne	$at,.Laligned
-	beq	$17,.Ldone
-	mov	$17,$0
-	br	.Little
+	bne	$17,.Little
 .Ldone: ret	($26)
 .end	OPENSSL_cleanse
+___

crypto/asn1/a_object.c

@@ -139,7 +139,7 @@ int a2d_ASN1_OBJECT(unsigned char *out, int olen, const char *buf, int num)
 				ASN1err(ASN1_F_A2D_ASN1_OBJECT,ASN1_R_INVALID_DIGIT);
 				goto err;
 				}
-			if (!use_bn && l > (ULONG_MAX / 10L))
+			if (!use_bn && l >= ((ULONG_MAX - 80) / 10L))
 				{
 				use_bn = 1;
 				if (!bl)
@@ -293,7 +293,7 @@ ASN1_OBJECT *c2i_ASN1_OBJECT(ASN1_OBJECT **a, const unsigned char **pp,
 	/* Sanity check OID encoding: can't have leading 0x80 in
 	 * subidentifiers, see: X.690 8.19.2
 	 */
-	for (i = 0, p = *pp + 1; i < len - 1; i++, p++)
+	for (i = 0, p = *pp; i < len; i++, p++)
 		{
 		if (*p == 0x80 && (!i || !(p[-1] & 0x80)))
 			{

crypto/asn1/a_strex.c

@@ -74,6 +74,11 @@
 
 #define CHARTYPE_BS_ESC		(ASN1_STRFLGS_ESC_2253 | CHARTYPE_FIRST_ESC_2253 | CHARTYPE_LAST_ESC_2253)
 
+#define ESC_FLAGS (ASN1_STRFLGS_ESC_2253 | \
+		  ASN1_STRFLGS_ESC_QUOTE | \
+		  ASN1_STRFLGS_ESC_CTRL | \
+		  ASN1_STRFLGS_ESC_MSB)
+
 
 /* Three IO functions for sending data to memory, a BIO and
  * and a FILE pointer.
@@ -148,6 +153,13 @@ static int do_esc_char(unsigned long c, unsigned char flags, char *do_quotes, ch
 		if(!io_ch(arg, tmphex, 3)) return -1;
 		return 3;
 	}
+	/* If we get this far and do any escaping at all must escape 
+	 * the escape character itself: backslash.
+	 */
+	if (chtmp == '\\' && flags & ESC_FLAGS) {
+		if(!io_ch(arg, "\\\\", 2)) return -1;
+		return 2;
+	}
 	if(!io_ch(arg, &chtmp, 1)) return -1;
 	return 1;
 }
@@ -292,11 +304,6 @@ static const signed char tag2nbyte[] = {
 	4, -1, 2		/* 28-30 */
 };
 
-#define ESC_FLAGS (ASN1_STRFLGS_ESC_2253 | \
-		  ASN1_STRFLGS_ESC_QUOTE | \
-		  ASN1_STRFLGS_ESC_CTRL | \
-		  ASN1_STRFLGS_ESC_MSB)
-
 /* This is the main function, print out an
  * ASN1_STRING taking note of various escape
  * and display options. Returns number of

crypto/asn1/a_strnid.c

@@ -95,7 +95,7 @@ unsigned long ASN1_STRING_get_default_mask(void)
  * default:   the default value, Printable, T61, BMP.
  */
 
-int ASN1_STRING_set_default_mask_asc(char *p)
+int ASN1_STRING_set_default_mask_asc(const char *p)
 {
 	unsigned long mask;
 	char *end;

crypto/asn1/ameth_lib.c

@@ -172,7 +172,6 @@ static const EVP_PKEY_ASN1_METHOD *pkey_asn1_find(int type)
 const EVP_PKEY_ASN1_METHOD *EVP_PKEY_asn1_find(ENGINE **pe, int type)
 	{
 	const EVP_PKEY_ASN1_METHOD *t;
-	ENGINE *e;
 
 	for (;;)
 		{
@@ -184,6 +183,7 @@ const EVP_PKEY_ASN1_METHOD *EVP_PKEY_asn1_find(ENGINE **pe, int type)
 	if (pe)
 		{
 #ifndef OPENSSL_NO_ENGINE
+		ENGINE *e;
 		/* type will contain the final unaliased type */
 		e = ENGINE_get_pkey_asn1_meth_engine(type);
 		if (e)

crypto/asn1/asn1.h

@@ -1067,7 +1067,7 @@ ASN1_STRING *ASN1_pack_string(void *obj, i2d_of_void *i2d,
 ASN1_STRING *ASN1_item_pack(void *obj, const ASN1_ITEM *it, ASN1_OCTET_STRING **oct);
 
 void ASN1_STRING_set_default_mask(unsigned long mask);
-int ASN1_STRING_set_default_mask_asc(char *p);
+int ASN1_STRING_set_default_mask_asc(const char *p);
 unsigned long ASN1_STRING_get_default_mask(void);
 int ASN1_mbstring_copy(ASN1_STRING **out, const unsigned char *in, int len,
 					int inform, unsigned long mask);

crypto/asn1/bio_ndef.c

@@ -57,9 +57,6 @@
 #include <openssl/bio.h>
 #include <openssl/err.h>
 
-#ifndef OPENSSL_SYSNAME_NETWARE
-#include <memory.h>
-#endif
 #include <stdio.h>
 
 /* Experimental NDEF ASN1 BIO support routines */

crypto/asn1/x_name.c

@@ -214,7 +214,9 @@ static int x509_name_ex_d2i(ASN1_VALUE **val,
 	*val = nm.a;
 	*in = p;
 	return ret;
-	err:
+err:
+        if (nm.x != NULL)
+		X509_NAME_free(nm.x);
 	ASN1err(ASN1_F_X509_NAME_EX_D2I, ERR_R_NESTED_ASN1_ERROR);
 	return 0;
 }
@@ -464,7 +466,8 @@ static int asn1_string_canon(ASN1_STRING *out, ASN1_STRING *in)
 			}
 		else
 			{
-			*to++ = tolower(*from++);
+			*to++ = tolower(*from);
+			from++;
 			i++;
 			}
 		}

crypto/asn1/x_x509.c

@@ -63,7 +63,7 @@
 #include <openssl/x509.h>
 #include <openssl/x509v3.h>
 
-ASN1_SEQUENCE(X509_CINF) = {
+ASN1_SEQUENCE_enc(X509_CINF, enc, 0) = {
 	ASN1_EXP_OPT(X509_CINF, version, ASN1_INTEGER, 0),
 	ASN1_SIMPLE(X509_CINF, serialNumber, ASN1_INTEGER),
 	ASN1_SIMPLE(X509_CINF, signature, X509_ALGOR),
@@ -74,7 +74,7 @@ ASN1_SEQUENCE(X509_CINF) = {
 	ASN1_IMP_OPT(X509_CINF, issuerUID, ASN1_BIT_STRING, 1),
 	ASN1_IMP_OPT(X509_CINF, subjectUID, ASN1_BIT_STRING, 2),
 	ASN1_EXP_SEQUENCE_OF_OPT(X509_CINF, extensions, X509_EXTENSION, 3)
-} ASN1_SEQUENCE_END(X509_CINF)
+} ASN1_SEQUENCE_END_enc(X509_CINF, X509_CINF)
 
 IMPLEMENT_ASN1_FUNCTIONS(X509_CINF)
 /* X509 top level structure needs a bit of customisation */

crypto/bio/b_sock.c

@@ -551,7 +551,30 @@ int BIO_socket_ioctl(int fd, long type, void *arg)
 #ifdef __DJGPP__
 	i=ioctlsocket(fd,type,(char *)arg);
 #else
-	i=ioctlsocket(fd,type,arg);
+# if defined(OPENSSL_SYS_VMS)
+	/* 2011-02-18 SMS.
+	 * VMS ioctl() can't tolerate a 64-bit "void *arg", but we
+	 * observe that all the consumers pass in an "unsigned long *",
+	 * so we arrange a local copy with a short pointer, and use
+	 * that, instead.
+	 */
+#  if __INITIAL_POINTER_SIZE == 64
+#   define ARG arg_32p
+#   pragma pointer_size save
+#   pragma pointer_size 32
+	unsigned long arg_32;
+	unsigned long *arg_32p;
+#   pragma pointer_size restore
+	arg_32p = &arg_32;
+	arg_32 = *((unsigned long *) arg);
+#  else /* __INITIAL_POINTER_SIZE == 64 */
+#   define ARG arg
+#  endif /* __INITIAL_POINTER_SIZE == 64 [else] */
+# else /* defined(OPENSSL_SYS_VMS) */
+#  define ARG arg
+# endif /* defined(OPENSSL_SYS_VMS) [else] */
+
+	i=ioctlsocket(fd,type,ARG);
 #endif /* __DJGPP__ */
 	if (i < 0)
 		SYSerr(SYS_F_IOCTLSOCKET,get_last_socket_error());
@@ -660,6 +683,7 @@ int BIO_get_accept_socket(char *host, int bind_mode)
 	 * note that commonly IPv6 wildchard socket can service
 	 * IPv4 connections just as well...  */
 	memset(&hint,0,sizeof(hint));
+	hint.ai_flags = AI_PASSIVE;
 	if (h)
 		{
 		if (strchr(h,':'))
@@ -672,7 +696,10 @@ int BIO_get_accept_socket(char *host, int bind_mode)
 #endif
 			}
 	    	else if (h[0]=='*' && h[1]=='\0')
+			{
+			hint.ai_family = AF_INET;
 			h=NULL;
+			}
 		}
 
 	if ((*p_getaddrinfo.f)(h,p,&hint,&res)) break;

crypto/bio/bf_buff.c

@@ -209,7 +209,7 @@ start:
 	/* add to buffer and return */
 	if (i >= inl)
 		{
-		memcpy(&(ctx->obuf[ctx->obuf_len]),in,inl);
+		memcpy(&(ctx->obuf[ctx->obuf_off+ctx->obuf_len]),in,inl);
 		ctx->obuf_len+=inl;
 		return(num+inl);
 		}
@@ -219,7 +219,7 @@ start:
 		{
 		if (i > 0) /* lets fill it up if we can */
 			{
-			memcpy(&(ctx->obuf[ctx->obuf_len]),in,i);
+			memcpy(&(ctx->obuf[ctx->obuf_off+ctx->obuf_len]),in,i);
 			in+=i;
 			inl-=i;
 			num+=i;
@@ -294,9 +294,9 @@ static long buffer_ctrl(BIO *b, int cmd, long num, void *ptr)
 	case BIO_C_GET_BUFF_NUM_LINES:
 		ret=0;
 		p1=ctx->ibuf;
-		for (i=ctx->ibuf_off; i<ctx->ibuf_len; i++)
+		for (i=0; i<ctx->ibuf_len; i++)
 			{
-			if (p1[i] == '\n') ret++;
+			if (p1[ctx->ibuf_off + i] == '\n') ret++;
 			}
 		break;
 	case BIO_CTRL_WPENDING:
@@ -399,17 +399,18 @@ static long buffer_ctrl(BIO *b, int cmd, long num, void *ptr)
 		for (;;)
 			{
 			BIO_clear_retry_flags(b);
-			if (ctx->obuf_len > ctx->obuf_off)
+			if (ctx->obuf_len > 0)
 				{
 				r=BIO_write(b->next_bio,
 					&(ctx->obuf[ctx->obuf_off]),
-					ctx->obuf_len-ctx->obuf_off);
+					ctx->obuf_len);
 #if 0
-fprintf(stderr,"FLUSH [%3d] %3d -> %3d\n",ctx->obuf_off,ctx->obuf_len-ctx->obuf_off,r);
+fprintf(stderr,"FLUSH [%3d] %3d -> %3d\n",ctx->obuf_off,ctx->obuf_len,r);
 #endif
 				BIO_copy_next_retry(b);
 				if (r <= 0) return((long)r);
 				ctx->obuf_off+=r;
+				ctx->obuf_len-=r;
 				}
 			else
 				{

crypto/bio/bio.h

@@ -306,6 +306,15 @@ DECLARE_STACK_OF(BIO)
 
 typedef struct bio_f_buffer_ctx_struct
 	{
+	/* Buffers are setup like this:
+	 *
+	 * <---------------------- size ----------------------->
+	 * +---------------------------------------------------+
+	 * | consumed | remaining          | free space        |
+	 * +---------------------------------------------------+
+	 * <-- off --><------- len ------->
+	 */
+
 	/* BIO *bio; */ /* this is now in the BIO struct */
 	int ibuf_size;	/* how big is the input buffer */
 	int obuf_size;	/* how big is the output buffer */

crypto/bio/bss_dgram.c

@@ -57,7 +57,6 @@
  *
  */
 
-#ifndef OPENSSL_NO_DGRAM
 
 #include <stdio.h>
 #include <errno.h>
@@ -65,6 +64,7 @@
 #include "cryptlib.h"
 
 #include <openssl/bio.h>
+#ifndef OPENSSL_NO_DGRAM
 
 #if defined(OPENSSL_SYS_WIN32) || defined(OPENSSL_SYS_VMS)
 #include <sys/timeb.h>
@@ -308,7 +308,6 @@ static int dgram_read(BIO *b, char *out, int outl)
 			OPENSSL_assert(sa.len.s<=sizeof(sa.peer));
 			sa.len.i = (int)sa.len.s;
 			}
-		dgram_reset_rcv_timeout(b);
 
 		if ( ! data->connected  && ret >= 0)
 			BIO_ctrl(b, BIO_CTRL_DGRAM_SET_PEER, 0, &sa.peer);
@@ -322,6 +321,8 @@ static int dgram_read(BIO *b, char *out, int outl)
 				data->_errno = get_last_socket_error();
 				}
 			}
+
+		dgram_reset_rcv_timeout(b);
 		}
 	return(ret);
 	}
@@ -340,7 +341,7 @@ static int dgram_write(BIO *b, const char *in, int inl)
 
 		if (data->peer.sa.sa_family == AF_INET)
 			peerlen = sizeof(data->peer.sa_in);
-#if OPENSSL_USE_IVP6
+#if OPENSSL_USE_IPV6
 		else if (data->peer.sa.sa_family == AF_INET6)
 			peerlen = sizeof(data->peer.sa_in6);
 #endif
@@ -745,9 +746,13 @@ static int BIO_dgram_should_retry(int i)
 		{
 		err=get_last_socket_error();
 
-#if defined(OPENSSL_SYS_WINDOWS) && 0 /* more microsoft stupidity? perhaps not? Ben 4/1/99 */
-		if ((i == -1) && (err == 0))
-			return(1);
+#if defined(OPENSSL_SYS_WINDOWS)
+	/* If the socket return value (i) is -1
+	 * and err is unexpectedly 0 at this point,
+	 * the error code was overwritten by
+	 * another system call before this error
+	 * handling is called.
+	 */
 #endif
 
 		return(BIO_dgram_non_fatal_error(err));
@@ -810,7 +815,6 @@ int BIO_dgram_non_fatal_error(int err)
 		}
 	return(0);
 	}
-#endif
 
 static void get_current_time(struct timeval *t)
 	{
@@ -828,3 +832,5 @@ static void get_current_time(struct timeval *t)
 	gettimeofday(t, NULL);
 #endif
 	}
+
+#endif

crypto/bio/bss_file.c

@@ -123,6 +123,7 @@ BIO *BIO_new_file(const char *filename, const char *mode)
 
 #if defined(_WIN32) && defined(CP_UTF8)
 	int sz, len_0 = (int)strlen(filename)+1;
+	DWORD flags;
 
 	/*
 	 * Basically there are three cases to cover: a) filename is
@@ -136,17 +137,22 @@ BIO *BIO_new_file(const char *filename, const char *mode)
 	 * ERROR_NO_UNICODE_TRANSLATION, in which case we fall
 	 * back to fopen...
 	 */
-	if ((sz=MultiByteToWideChar(CP_UTF8,MB_ERR_INVALID_CHARS,
+	if ((sz=MultiByteToWideChar(CP_UTF8,(flags=MB_ERR_INVALID_CHARS),
+					filename,len_0,NULL,0))>0 ||
+	    (GetLastError()==ERROR_INVALID_FLAGS &&
+	     (sz=MultiByteToWideChar(CP_UTF8,(flags=0),
 					filename,len_0,NULL,0))>0)
+	   )
 		{
 		WCHAR  wmode[8];
 		WCHAR *wfilename = _alloca(sz*sizeof(WCHAR));
 
-		if (MultiByteToWideChar(CP_UTF8,MB_ERR_INVALID_CHARS,
+		if (MultiByteToWideChar(CP_UTF8,flags,
 					filename,len_0,wfilename,sz) &&
 		    MultiByteToWideChar(CP_UTF8,0,mode,strlen(mode)+1,
 			    		wmode,sizeof(wmode)/sizeof(wmode[0])) &&
-		    (file=_wfopen(wfilename,wmode))==NULL && errno==ENOENT
+		    (file=_wfopen(wfilename,wmode))==NULL &&
+		    (errno==ENOENT || errno==EBADF)
 		   )	/* UTF-8 decode succeeded, but no file, filename
 			 * could still have been locale-ized... */
 			file = fopen(filename,mode);

crypto/bio/bss_log.c

@@ -75,6 +75,15 @@
 #  include <descrip.h>
 #  include <lib$routines.h>
 #  include <starlet.h>
+/* Some compiler options may mask the declaration of "_malloc32". */
+#  if __INITIAL_POINTER_SIZE && defined _ANSI_C_SOURCE
+#    if __INITIAL_POINTER_SIZE == 64
+#      pragma pointer_size save
+#      pragma pointer_size 32
+    void * _malloc32  (__size_t);
+#      pragma pointer_size restore
+#    endif /* __INITIAL_POINTER_SIZE == 64 */
+#  endif /* __INITIAL_POINTER_SIZE && defined _ANSI_C_SOURCE */
 #elif defined(__ultrix)
 #  include <sys/syslog.h>
 #elif defined(OPENSSL_SYS_NETWARE)
@@ -300,7 +309,24 @@ static void xopenlog(BIO* bp, char* name, int level)
 static void xsyslog(BIO *bp, int priority, const char *string)
 {
 	struct dsc$descriptor_s opc_dsc;
+
+/* Arrange 32-bit pointer to opcdef buffer and malloc(), if needed. */
+#if __INITIAL_POINTER_SIZE == 64
+# pragma pointer_size save
+# pragma pointer_size 32
+# define OPCDEF_TYPE __char_ptr32
+# define OPCDEF_MALLOC _malloc32
+#else /* __INITIAL_POINTER_SIZE == 64 */
+# define OPCDEF_TYPE char *
+# define OPCDEF_MALLOC OPENSSL_malloc
+#endif /* __INITIAL_POINTER_SIZE == 64 [else] */
+
 	struct opcdef *opcdef_p;
+
+#if __INITIAL_POINTER_SIZE == 64
+# pragma pointer_size restore
+#endif /* __INITIAL_POINTER_SIZE == 64 */
+
 	char buf[10240];
 	unsigned int len;
         struct dsc$descriptor_s buf_dsc;
@@ -326,8 +352,8 @@ static void xsyslog(BIO *bp, int priority, const char *string)
 
 	lib$sys_fao(&fao_cmd, &len, &buf_dsc, priority_tag, string);
 
-	/* we know there's an 8 byte header.  That's documented */
-	opcdef_p = (struct opcdef *) OPENSSL_malloc(8 + len);
+	/* We know there's an 8-byte header.  That's documented. */
+	opcdef_p = OPCDEF_MALLOC( 8+ len);
 	opcdef_p->opc$b_ms_type = OPC$_RQ_RQST;
 	memcpy(opcdef_p->opc$z_ms_target_classes, &VMS_OPC_target, 3);
 	opcdef_p->opc$l_ms_rqstid = 0;
@@ -335,7 +361,7 @@ static void xsyslog(BIO *bp, int priority, const char *string)
 
 	opc_dsc.dsc$b_dtype = DSC$K_DTYPE_T;
 	opc_dsc.dsc$b_class = DSC$K_CLASS_S;
-	opc_dsc.dsc$a_pointer = (char *)opcdef_p;
+	opc_dsc.dsc$a_pointer = (OPCDEF_TYPE) opcdef_p;
 	opc_dsc.dsc$w_length = len + 8;
 
 	sys$sndopr(opc_dsc, 0);

crypto/bn/asm/alpha-mont.pl

@@ -41,8 +41,12 @@ $j="s4";
 $m1="s5";
 
 $code=<<___;
+#ifdef __linux__
+#include <asm/regdef.h>
+#else
 #include <asm.h>
 #include <regdef.h>
+#endif
 
 .text
 
@@ -76,7 +80,7 @@ bn_mul_mont:
 	ldq	$aj,8($ap)
 	subq	sp,AT,sp
 	ldq	$bi,0($bp)	# bp[0]
-	mov	-4096,AT
+	lda	AT,-4096(zero)	# mov	-4096,AT
 	ldq	$n0,0($n0)
 	and	sp,AT,sp
 
@@ -106,9 +110,9 @@ bn_mul_mont:
 .align	4
 .L1st:
 	.set	noreorder
-	ldq	$aj,($aj)
+	ldq	$aj,0($aj)
 	addl	$j,1,$j
-	ldq	$nj,($nj)
+	ldq	$nj,0($nj)
 	lda	$tp,8($tp)
 
 	addq	$alo,$hi0,$lo0
@@ -159,12 +163,12 @@ bn_mul_mont:
 .align	4
 .Louter:
 	s8addq	$i,$bp,$bi
-	ldq	$hi0,($ap)
+	ldq	$hi0,0($ap)
 	ldq	$aj,8($ap)
-	ldq	$bi,($bi)
-	ldq	$hi1,($np)
+	ldq	$bi,0($bi)
+	ldq	$hi1,0($np)
 	ldq	$nj,8($np)
-	ldq	$tj,(sp)
+	ldq	$tj,0(sp)
 
 	mulq	$hi0,$bi,$lo0
 	umulh	$hi0,$bi,$hi0
@@ -195,10 +199,10 @@ bn_mul_mont:
 	.set	noreorder
 	ldq	$tj,8($tp)	#L0
 	nop			#U1
-	ldq	$aj,($aj)	#L1
+	ldq	$aj,0($aj)	#L1
 	s8addq	$j,$np,$nj	#U0
 
-	ldq	$nj,($nj)	#L0
+	ldq	$nj,0($nj)	#L0
 	nop			#U1
 	addq	$alo,$hi0,$lo0	#L1
 	lda	$tp,8($tp)
@@ -247,7 +251,7 @@ bn_mul_mont:
 	addq	$hi1,v0,$hi1
 
 	addq	$hi1,$hi0,$lo1
-	stq	$j,($tp)
+	stq	$j,0($tp)
 	cmpult	$lo1,$hi0,$hi1
 	addq	$lo1,$tj,$lo1
 	cmpult	$lo1,$tj,AT
@@ -265,8 +269,8 @@ bn_mul_mont:
 	mov	0,$hi0		# clear borrow bit
 
 .align	4
-.Lsub:	ldq	$lo0,($tp)
-	ldq	$lo1,($np)
+.Lsub:	ldq	$lo0,0($tp)
+	ldq	$lo1,0($np)
 	lda	$tp,8($tp)
 	lda	$np,8($np)
 	subq	$lo0,$lo1,$lo1	# tp[i]-np[i]
@@ -274,7 +278,7 @@ bn_mul_mont:
 	subq	$lo1,$hi0,$lo0
 	cmpult	$lo1,$lo0,$hi0
 	or	$hi0,AT,$hi0
-	stq	$lo0,($rp)
+	stq	$lo0,0($rp)
 	cmpult	$tp,$tj,v0
 	lda	$rp,8($rp)
 	bne	v0,.Lsub
@@ -288,7 +292,7 @@ bn_mul_mont:
 	bis	$bp,$ap,$ap	# ap=borrow?tp:rp
 
 .align	4
-.Lcopy:	ldq	$aj,($ap)	# copy or in-place refresh
+.Lcopy:	ldq	$aj,0($ap)	# copy or in-place refresh
 	lda	$tp,8($tp)
 	lda	$rp,8($rp)
 	lda	$ap,8($ap)
@@ -309,8 +313,8 @@ bn_mul_mont:
 	lda	sp,48(sp)
 	ret	(ra)
 .end	bn_mul_mont
-.rdata
-.asciiz	"Montgomery Multiplication for Alpha, CRYPTOGAMS by <appro\@openssl.org>"
+.ascii	"Montgomery Multiplication for Alpha, CRYPTOGAMS by <appro\@openssl.org>"
+.align	2
 ___
 
 print $code;

crypto/bn/asm/ppc.pl

@@ -949,7 +949,7 @@ $data=<<EOF;
 	addze	r11,r0
 					#mul_add_c(a[3],b[2],c3,c1,c2);
 	$LD	r6,`3*$BNSZ`(r4)
-	$LD	r7,`2*$BNSZ`(r4)
+	$LD	r7,`2*$BNSZ`(r5)
 	$UMULL	r8,r6,r7
 	$UMULH	r9,r6,r7
 	addc	r12,r8,r12

crypto/bn/asm/s390x-mont.pl

@@ -69,8 +69,8 @@ bn_mul_mont:
 	cghi	$num,16		#
 	lghi	%r2,0		#
 	blr	%r14		# if($num<16) return 0;
-	cghi	$num,128	#
-	bhr	%r14		# if($num>128) return 0;
+	cghi	$num,96		#
+	bhr	%r14		# if($num>96) return 0;
 
 	stmg	%r3,%r15,24($sp)
 

crypto/bn/asm/s390x.S

@@ -1,4 +1,4 @@
-.ident "s390x.S, version 1.0"
+.ident "s390x.S, version 1.1"
 // ====================================================================
 // Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
 // project.
@@ -24,67 +24,67 @@ bn_mul_add_words:
 	bler	%r14		// if (len<=0) return 0;
 
 	stmg	%r6,%r10,48(%r15)
+	lghi	%r10,3
 	lghi	%r8,0		// carry = 0
-	srag	%r10,%r4,2	// cnt=len/4
-	jz	.Loop1_madd
+	nr	%r10,%r4	// len%4
+	sra	%r4,2		// cnt=len/4
+	jz	.Loop1_madd	// carry is incidentally cleared if branch taken
+	algr	zero,zero	// clear carry
 
 .Loop4_madd:
 	lg	%r7,0(%r2,%r3)	// ap[i]
 	mlgr	%r6,%r5		// *=w
-	algr	%r7,%r8		// +=carry
+	alcgr	%r7,%r8		// +=carry
 	alcgr	%r6,zero
 	alg	%r7,0(%r2,%r1)	// +=rp[i]
-	alcgr	%r6,zero
 	stg	%r7,0(%r2,%r1)	// rp[i]=
 
 	lg	%r9,8(%r2,%r3)
 	mlgr	%r8,%r5
-	algr	%r9,%r6
+	alcgr	%r9,%r6
 	alcgr	%r8,zero
 	alg	%r9,8(%r2,%r1)
-	alcgr	%r8,zero
 	stg	%r9,8(%r2,%r1)
 
 	lg	%r7,16(%r2,%r3)
 	mlgr	%r6,%r5
-	algr	%r7,%r8
+	alcgr	%r7,%r8
 	alcgr	%r6,zero
 	alg	%r7,16(%r2,%r1)
-	alcgr	%r6,zero
 	stg	%r7,16(%r2,%r1)
 
 	lg	%r9,24(%r2,%r3)
 	mlgr	%r8,%r5
-	algr	%r9,%r6
+	alcgr	%r9,%r6
 	alcgr	%r8,zero
 	alg	%r9,24(%r2,%r1)
-	alcgr	%r8,zero
 	stg	%r9,24(%r2,%r1)
 
 	la	%r2,32(%r2)	// i+=4
-	brct	%r10,.Loop4_madd
+	brct	%r4,.Loop4_madd
 
-	lghi	%r10,3
-	nr	%r4,%r10	// cnt=len%4
-	jz	.Lend_madd
+	la	%r10,1(%r10)		// see if len%4 is zero ...
+	brct	%r10,.Loop1_madd	// without touching condition code:-)
+
+.Lend_madd:
+	alcgr	%r8,zero	// collect carry bit
+	lgr	%r2,%r8
+	lmg	%r6,%r10,48(%r15)
+	br	%r14
 
 .Loop1_madd:
 	lg	%r7,0(%r2,%r3)	// ap[i]
 	mlgr	%r6,%r5		// *=w
-	algr	%r7,%r8		// +=carry
+	alcgr	%r7,%r8		// +=carry
 	alcgr	%r6,zero
 	alg	%r7,0(%r2,%r1)	// +=rp[i]
-	alcgr	%r6,zero
 	stg	%r7,0(%r2,%r1)	// rp[i]=
 
 	lgr	%r8,%r6
 	la	%r2,8(%r2)	// i++
-	brct	%r4,.Loop1_madd
+	brct	%r10,.Loop1_madd
 
-.Lend_madd:
-	lgr	%r2,%r8
-	lmg	%r6,%r10,48(%r15)
-	br	%r14
+	j	.Lend_madd
 .size	bn_mul_add_words,.-bn_mul_add_words
 
 // BN_ULONG bn_mul_words(BN_ULONG *r2,BN_ULONG *r3,int r4,BN_ULONG r5);
@@ -99,57 +99,57 @@ bn_mul_words:
 	bler	%r14		// if (len<=0) return 0;
 
 	stmg	%r6,%r10,48(%r15)
+	lghi	%r10,3
 	lghi	%r8,0		// carry = 0
-	srag	%r10,%r4,2	// cnt=len/4
-	jz	.Loop1_mul
+	nr	%r10,%r4	// len%4
+	sra	%r4,2		// cnt=len/4
+	jz	.Loop1_mul	// carry is incidentally cleared if branch taken
+	algr	zero,zero	// clear carry
 
 .Loop4_mul:
 	lg	%r7,0(%r2,%r3)	// ap[i]
 	mlgr	%r6,%r5		// *=w
-	algr	%r7,%r8		// +=carry
-	alcgr	%r6,zero
+	alcgr	%r7,%r8		// +=carry
 	stg	%r7,0(%r2,%r1)	// rp[i]=
 
 	lg	%r9,8(%r2,%r3)
 	mlgr	%r8,%r5
-	algr	%r9,%r6
-	alcgr	%r8,zero
+	alcgr	%r9,%r6
 	stg	%r9,8(%r2,%r1)
 
 	lg	%r7,16(%r2,%r3)
 	mlgr	%r6,%r5
-	algr	%r7,%r8
-	alcgr	%r6,zero
+	alcgr	%r7,%r8
 	stg	%r7,16(%r2,%r1)
 
 	lg	%r9,24(%r2,%r3)
 	mlgr	%r8,%r5
-	algr	%r9,%r6
-	alcgr	%r8,zero
+	alcgr	%r9,%r6
 	stg	%r9,24(%r2,%r1)
 
 	la	%r2,32(%r2)	// i+=4
-	brct	%r10,.Loop4_mul
+	brct	%r4,.Loop4_mul
 
-	lghi	%r10,3
-	nr	%r4,%r10	// cnt=len%4
-	jz	.Lend_mul
+	la	%r10,1(%r10)		// see if len%4 is zero ...
+	brct	%r10,.Loop1_mul		// without touching condition code:-)
+
+.Lend_mul:
+	alcgr	%r8,zero	// collect carry bit
+	lgr	%r2,%r8
+	lmg	%r6,%r10,48(%r15)
+	br	%r14
 
 .Loop1_mul:
 	lg	%r7,0(%r2,%r3)	// ap[i]
 	mlgr	%r6,%r5		// *=w
-	algr	%r7,%r8		// +=carry
-	alcgr	%r6,zero
+	alcgr	%r7,%r8		// +=carry
 	stg	%r7,0(%r2,%r1)	// rp[i]=
 
 	lgr	%r8,%r6
 	la	%r2,8(%r2)	// i++
-	brct	%r4,.Loop1_mul
+	brct	%r10,.Loop1_mul
 
-.Lend_mul:
-	lgr	%r2,%r8
-	lmg	%r6,%r10,48(%r15)
-	br	%r14
+	j	.Lend_mul
 .size	bn_mul_words,.-bn_mul_words
 
 // void bn_sqr_words(BN_ULONG *r2,BN_ULONG *r2,int r4)

crypto/bn/asm/x86-mont.pl

@@ -527,8 +527,10 @@ $sbit=$num;
 	&jle	(&label("sqradd"));
 
 	&mov	($carry,"edx");
-	&lea	("edx",&DWP(0,$sbit,"edx",2));
+	&add	("edx","edx");
 	&shr	($carry,31);
+	&add	("edx",$sbit);
+	&adc	($carry,0);
 &set_label("sqrlast");
 	&mov	($word,$_n0);
 	&mov	($inp,$_np);

crypto/bn/bn.h

@@ -253,6 +253,24 @@ extern "C" {
 #define BN_HEX_FMT2	"%08X"
 #endif
 
+/* 2011-02-22 SMS.
+ * In various places, a size_t variable or a type cast to size_t was
+ * used to perform integer-only operations on pointers.  This failed on
+ * VMS with 64-bit pointers (CC /POINTER_SIZE = 64) because size_t is
+ * still only 32 bits.  What's needed in these cases is an integer type
+ * with the same size as a pointer, which size_t is not certain to be. 
+ * The only fix here is VMS-specific.
+ */
+#if defined(OPENSSL_SYS_VMS)
+# if __INITIAL_POINTER_SIZE == 64
+#  define PTR_SIZE_INT long long
+# else /* __INITIAL_POINTER_SIZE == 64 */
+#  define PTR_SIZE_INT int
+# endif /* __INITIAL_POINTER_SIZE == 64 [else] */
+#else /* defined(OPENSSL_SYS_VMS) */
+# define PTR_SIZE_INT size_t
+#endif /* defined(OPENSSL_SYS_VMS) [else] */
+
 #define BN_DEFAULT_BITS	1280
 
 #define BN_FLG_MALLOCED		0x01

crypto/bn/bn_blind.c

@@ -126,7 +126,7 @@ struct bn_blinding_st
 				  * used only by crypto/rsa/rsa_eay.c, rsa_lib.c */
 #endif
 	CRYPTO_THREADID tid;
-	unsigned int  counter;
+	int counter;
 	unsigned long flags;
 	BN_MONT_CTX *m_ctx;
 	int (*bn_mod_exp)(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
@@ -160,7 +160,10 @@ BN_BLINDING *BN_BLINDING_new(const BIGNUM *A, const BIGNUM *Ai, BIGNUM *mod)
 	if (BN_get_flags(mod, BN_FLG_CONSTTIME) != 0)
 		BN_set_flags(ret->mod, BN_FLG_CONSTTIME);
 
-	ret->counter = BN_BLINDING_COUNTER;
+	/* Set the counter to the special value -1
+	 * to indicate that this is never-used fresh blinding
+	 * that does not need updating before first use. */
+	ret->counter = -1;
 	CRYPTO_THREADID_current(&ret->tid);
 	return(ret);
 err:
@@ -190,7 +193,10 @@ int BN_BLINDING_update(BN_BLINDING *b, BN_CTX *ctx)
 		goto err;
 		}
 
-	if (--(b->counter) == 0 && b->e != NULL &&
+	if (b->counter == -1)
+		b->counter = 0;
+
+	if (++b->counter == BN_BLINDING_COUNTER && b->e != NULL &&
 		!(b->flags & BN_BLINDING_NO_RECREATE))
 		{
 		/* re-create blinding parameters */
@@ -205,8 +211,8 @@ int BN_BLINDING_update(BN_BLINDING *b, BN_CTX *ctx)
 
 	ret=1;
 err:
-	if (b->counter == 0)
-		b->counter = BN_BLINDING_COUNTER;
+	if (b->counter == BN_BLINDING_COUNTER)
+		b->counter = 0;
 	return(ret);
 	}
 
@@ -227,6 +233,12 @@ int BN_BLINDING_convert_ex(BIGNUM *n, BIGNUM *r, BN_BLINDING *b, BN_CTX *ctx)
 		return(0);
 		}
 
+	if (b->counter == -1)
+		/* Fresh blinding, doesn't need updating. */
+		b->counter = 0;
+	else if (!BN_BLINDING_update(b,ctx))
+		return(0);
+
 	if (r != NULL)
 		{
 		if (!BN_copy(r, b->Ai)) ret=0;
@@ -247,22 +259,19 @@ int BN_BLINDING_invert_ex(BIGNUM *n, const BIGNUM *r, BN_BLINDING *b, BN_CTX *ct
 	int ret;
 
 	bn_check_top(n);
-	if ((b->A == NULL) || (b->Ai == NULL))
-		{
-		BNerr(BN_F_BN_BLINDING_INVERT_EX,BN_R_NOT_INITIALIZED);
-		return(0);
-		}
 
 	if (r != NULL)
 		ret = BN_mod_mul(n, n, r, b->mod, ctx);
 	else
-		ret = BN_mod_mul(n, n, b->Ai, b->mod, ctx);
-
-	if (ret >= 0)
 		{
-		if (!BN_BLINDING_update(b,ctx))
+		if (b->Ai == NULL)
+			{
+			BNerr(BN_F_BN_BLINDING_INVERT_EX,BN_R_NOT_INITIALIZED);
 			return(0);
+			}
+		ret = BN_mod_mul(n, n, b->Ai, b->mod, ctx);
 		}
+
 	bn_check_top(n);
 	return(ret);
 	}

crypto/bn/bn_exp2.c

@@ -301,7 +301,8 @@ int BN_mod_exp2_mont(BIGNUM *rr, const BIGNUM *a1, const BIGNUM *p1,
 			r_is_one = 0;
 			}
 		}
-	BN_from_montgomery(rr,r,mont,ctx);
+	if (!BN_from_montgomery(rr,r,mont,ctx))
+		goto err;
 	ret=1;
 err:
 	if ((in_mont == NULL) && (mont != NULL)) BN_MONT_CTX_free(mont);

crypto/bn/bn_gf2m.c

@@ -545,6 +545,7 @@ int BN_GF2m_mod_inv(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx)
 		{
 		while (!BN_is_odd(u))
 			{
+			if (BN_is_zero(u)) goto err;
 			if (!BN_rshift1(u, u)) goto err;
 			if (BN_is_odd(b))
 				{

crypto/bn/bn_mont.c

@@ -277,7 +277,7 @@ static int BN_from_montgomery_word(BIGNUM *ret, BIGNUM *r, BN_MONT_CTX *mont)
 	m1|=m2;			/* (al!=ri) */
 	m1|=(0-(size_t)v);	/* (al!=ri || v) */
 	m1&=~m2;		/* (al!=ri || v) && !al>ri */
-	nrp=(BN_ULONG *)(((size_t)rp&~m1)|((size_t)ap&m1));
+	nrp=(BN_ULONG *)(((PTR_SIZE_INT)rp&~m1)|((PTR_SIZE_INT)ap&m1));
 	}
 
 	/* 'i<ri' is chosen to eliminate dependency on input data, even

crypto/bn/bn_nist.c

@@ -354,7 +354,7 @@ int BN_nist_mod_192(BIGNUM *r, const BIGNUM *a, const BIGNUM *field,
 	         buf[BN_NIST_192_TOP],
 		 c_d[BN_NIST_192_TOP],
 		*res;
-	size_t   mask;
+	PTR_SIZE_INT mask;
 	static const BIGNUM _bignum_nist_p_192_sqr = {
 		(BN_ULONG *)_nist_p_192_sqr,
 		sizeof(_nist_p_192_sqr)/sizeof(_nist_p_192_sqr[0]),
@@ -405,9 +405,10 @@ int BN_nist_mod_192(BIGNUM *r, const BIGNUM *a, const BIGNUM *field,
 	 * 'tmp=result-modulus; if (!carry || !borrow) result=tmp;'
 	 * this is what happens below, but without explicit if:-) a.
 	 */
-	mask  = 0-(size_t)bn_sub_words(c_d,r_d,_nist_p_192[0],BN_NIST_192_TOP);
-	mask &= 0-(size_t)carry;
-	res   = (BN_ULONG *)(((size_t)c_d&~mask) | ((size_t)r_d&mask));
+	mask  = 0-(PTR_SIZE_INT)bn_sub_words(c_d,r_d,_nist_p_192[0],BN_NIST_192_TOP);
+	mask &= 0-(PTR_SIZE_INT)carry;
+	res   = (BN_ULONG *)
+	 (((PTR_SIZE_INT)c_d&~mask) | ((PTR_SIZE_INT)r_d&mask));
 	nist_cp_bn(r_d, res, BN_NIST_192_TOP);
 	r->top = BN_NIST_192_TOP;
 	bn_correct_top(r);
@@ -438,8 +439,8 @@ int BN_nist_mod_224(BIGNUM *r, const BIGNUM *a, const BIGNUM *field,
 	         buf[BN_NIST_224_TOP],
 		 c_d[BN_NIST_224_TOP],
 		*res;
-	size_t   mask;
-	union { bn_addsub_f f; size_t p; } u;
+	PTR_SIZE_INT mask;
+	union { bn_addsub_f f; PTR_SIZE_INT p; } u;
 	static const BIGNUM _bignum_nist_p_224_sqr = {
 		(BN_ULONG *)_nist_p_224_sqr,
 		sizeof(_nist_p_224_sqr)/sizeof(_nist_p_224_sqr[0]),
@@ -510,16 +511,18 @@ int BN_nist_mod_224(BIGNUM *r, const BIGNUM *a, const BIGNUM *field,
 		 * to be compared to the modulus and conditionally
 		 * adjusted by *subtracting* the latter. */
 		carry = (int)bn_add_words(r_d,r_d,_nist_p_224[-carry-1],BN_NIST_224_TOP);
-		mask = 0-(size_t)carry;
-		u.p = ((size_t)bn_sub_words&mask) | ((size_t)bn_add_words&~mask);
+		mask = 0-(PTR_SIZE_INT)carry;
+		u.p = ((PTR_SIZE_INT)bn_sub_words&mask) |
+		 ((PTR_SIZE_INT)bn_add_words&~mask);
 		}
 	else
 		carry = 1;
 
 	/* otherwise it's effectively same as in BN_nist_mod_192... */
-	mask  = 0-(size_t)(*u.f)(c_d,r_d,_nist_p_224[0],BN_NIST_224_TOP);
-	mask &= 0-(size_t)carry;
-	res   = (BN_ULONG *)(((size_t)c_d&~mask) | ((size_t)r_d&mask));
+	mask  = 0-(PTR_SIZE_INT)(*u.f)(c_d,r_d,_nist_p_224[0],BN_NIST_224_TOP);
+	mask &= 0-(PTR_SIZE_INT)carry;
+	res   = (BN_ULONG *)(((PTR_SIZE_INT)c_d&~mask) |
+	 ((PTR_SIZE_INT)r_d&mask));
 	nist_cp_bn(r_d, res, BN_NIST_224_TOP);
 	r->top = BN_NIST_224_TOP;
 	bn_correct_top(r);
@@ -549,8 +552,8 @@ int BN_nist_mod_256(BIGNUM *r, const BIGNUM *a, const BIGNUM *field,
 	         buf[BN_NIST_256_TOP],
 		 c_d[BN_NIST_256_TOP],
 		*res;
-	size_t   mask;
-	union { bn_addsub_f f; size_t p; } u;
+	PTR_SIZE_INT mask;
+	union { bn_addsub_f f; PTR_SIZE_INT p; } u;
 	static const BIGNUM _bignum_nist_p_256_sqr = {
 		(BN_ULONG *)_nist_p_256_sqr,
 		sizeof(_nist_p_256_sqr)/sizeof(_nist_p_256_sqr[0]),
@@ -629,15 +632,17 @@ int BN_nist_mod_256(BIGNUM *r, const BIGNUM *a, const BIGNUM *field,
 	else if (carry < 0)
 		{
 		carry = (int)bn_add_words(r_d,r_d,_nist_p_256[-carry-1],BN_NIST_256_TOP);
-		mask = 0-(size_t)carry;
-		u.p = ((size_t)bn_sub_words&mask) | ((size_t)bn_add_words&~mask);
+		mask = 0-(PTR_SIZE_INT)carry;
+		u.p = ((PTR_SIZE_INT)bn_sub_words&mask) |
+		 ((PTR_SIZE_INT)bn_add_words&~mask);
 		}
 	else
 		carry = 1;
 
-	mask  = 0-(size_t)(*u.f)(c_d,r_d,_nist_p_256[0],BN_NIST_256_TOP);
-	mask &= 0-(size_t)carry;
-	res   = (BN_ULONG *)(((size_t)c_d&~mask) | ((size_t)r_d&mask));
+	mask  = 0-(PTR_SIZE_INT)(*u.f)(c_d,r_d,_nist_p_256[0],BN_NIST_256_TOP);
+	mask &= 0-(PTR_SIZE_INT)carry;
+	res   = (BN_ULONG *)(((PTR_SIZE_INT)c_d&~mask) |
+	 ((PTR_SIZE_INT)r_d&mask));
 	nist_cp_bn(r_d, res, BN_NIST_256_TOP);
 	r->top = BN_NIST_256_TOP;
 	bn_correct_top(r);
@@ -671,8 +676,8 @@ int BN_nist_mod_384(BIGNUM *r, const BIGNUM *a, const BIGNUM *field,
 	         buf[BN_NIST_384_TOP],
 		 c_d[BN_NIST_384_TOP],
 		*res;
-	size_t	 mask;
-	union { bn_addsub_f f; size_t p; } u;
+	PTR_SIZE_INT mask;
+	union { bn_addsub_f f; PTR_SIZE_INT p; } u;
 	static const BIGNUM _bignum_nist_p_384_sqr = {
 		(BN_ULONG *)_nist_p_384_sqr,
 		sizeof(_nist_p_384_sqr)/sizeof(_nist_p_384_sqr[0]),
@@ -754,15 +759,17 @@ int BN_nist_mod_384(BIGNUM *r, const BIGNUM *a, const BIGNUM *field,
 	else if (carry < 0)
 		{
 		carry = (int)bn_add_words(r_d,r_d,_nist_p_384[-carry-1],BN_NIST_384_TOP);
-		mask = 0-(size_t)carry;
-		u.p = ((size_t)bn_sub_words&mask) | ((size_t)bn_add_words&~mask);
+		mask = 0-(PTR_SIZE_INT)carry;
+		u.p = ((PTR_SIZE_INT)bn_sub_words&mask) |
+		 ((PTR_SIZE_INT)bn_add_words&~mask);
 		}
 	else
 		carry = 1;
 
-	mask  = 0-(size_t)(*u.f)(c_d,r_d,_nist_p_384[0],BN_NIST_384_TOP);
-	mask &= 0-(size_t)carry;
-	res   = (BN_ULONG *)(((size_t)c_d&~mask) | ((size_t)r_d&mask));
+	mask  = 0-(PTR_SIZE_INT)(*u.f)(c_d,r_d,_nist_p_384[0],BN_NIST_384_TOP);
+	mask &= 0-(PTR_SIZE_INT)carry;
+	res   = (BN_ULONG *)(((PTR_SIZE_INT)c_d&~mask) |
+	 ((PTR_SIZE_INT)r_d&mask));
 	nist_cp_bn(r_d, res, BN_NIST_384_TOP);
 	r->top = BN_NIST_384_TOP;
 	bn_correct_top(r);
@@ -781,7 +788,7 @@ int BN_nist_mod_521(BIGNUM *r, const BIGNUM *a, const BIGNUM *field,
 	BN_ULONG *r_d, *a_d = a->d,
 		 t_d[BN_NIST_521_TOP],
 		 val,tmp,*res;
-	size_t	mask;
+	PTR_SIZE_INT mask;
 	static const BIGNUM _bignum_nist_p_521_sqr = {
 		(BN_ULONG *)_nist_p_521_sqr,
 		sizeof(_nist_p_521_sqr)/sizeof(_nist_p_521_sqr[0]),
@@ -826,8 +833,9 @@ int BN_nist_mod_521(BIGNUM *r, const BIGNUM *a, const BIGNUM *field,
 	r_d[i] &= BN_NIST_521_TOP_MASK;
 
 	bn_add_words(r_d,r_d,t_d,BN_NIST_521_TOP);
-	mask = 0-(size_t)bn_sub_words(t_d,r_d,_nist_p_521,BN_NIST_521_TOP);
-	res  = (BN_ULONG *)(((size_t)t_d&~mask) | ((size_t)r_d&mask));
+	mask = 0-(PTR_SIZE_INT)bn_sub_words(t_d,r_d,_nist_p_521,BN_NIST_521_TOP);
+	res  = (BN_ULONG *)(((PTR_SIZE_INT)t_d&~mask) |
+	 ((PTR_SIZE_INT)r_d&mask));
 	nist_cp_bn(r_d,res,BN_NIST_521_TOP);
 	r->top = BN_NIST_521_TOP;
 	bn_correct_top(r);

crypto/comp/c_rle.c

@@ -46,7 +46,7 @@ static int rle_expand_block(COMP_CTX *ctx, unsigned char *out,
 	{
 	int i;
 
-	if (olen < (ilen-1))
+	if (ilen == 0 || olen < (ilen-1))
 		{
 		/* ZZZZZZZZZZZZZZZZZZZZZZ */
 		return(-1);
@@ -59,4 +59,3 @@ static int rle_expand_block(COMP_CTX *ctx, unsigned char *out,
 		}
 	return(ilen-1);
 	}
-

crypto/conf/conf_api.c

@@ -64,6 +64,7 @@
 #endif
 
 #include <assert.h>
+#include <stdlib.h>
 #include <string.h>
 #include <openssl/conf.h>
 #include <openssl/conf_api.h>

crypto/cryptlib.c

@@ -731,7 +731,6 @@ BOOL WINAPI DllMain(HINSTANCE hinstDLL, DWORD fdwReason,
 	case DLL_THREAD_ATTACH:
 		break;
 	case DLL_THREAD_DETACH:
-		ERR_remove_state(0);
 		break;
 	case DLL_PROCESS_DETACH:
 		break;
@@ -743,6 +742,16 @@ BOOL WINAPI DllMain(HINSTANCE hinstDLL, DWORD fdwReason,
 #if defined(_WIN32) && !defined(__CYGWIN__)
 #include <tchar.h>
 #include <signal.h>
+#ifdef __WATCOMC__
+#if defined(_UNICODE) || defined(__UNICODE__)
+#define _vsntprintf _vsnwprintf
+#else
+#define _vsntprintf _vsnprintf
+#endif
+#endif
+#ifdef _MSC_VER
+#define alloca _alloca
+#endif
 
 #if defined(_WIN32_WINNT) && _WIN32_WINNT>=0x0333
 int OPENSSL_isservice(void)
@@ -773,11 +782,7 @@ int OPENSSL_isservice(void)
 
     if (len>512) return -1;		/* paranoia */
     len++,len&=~1;			/* paranoia */
-#ifdef _MSC_VER
-    name=(WCHAR *)_alloca(len+sizeof(WCHAR));
-#else
     name=(WCHAR *)alloca(len+sizeof(WCHAR));
-#endif
     if (!GetUserObjectInformationW (h,UOI_NAME,name,len,&len))
 	return -1;
 
@@ -822,11 +827,7 @@ void OPENSSL_showfatal (const char *fmta,...)
       size_t len_0=strlen(fmta)+1,i;
       WCHAR *fmtw;
 
-#ifdef _MSC_VER
-	fmtw = (WCHAR *)_alloca (len_0*sizeof(WCHAR));
-#else
-	fmtw = (WCHAR *)alloca (len_0*sizeof(WCHAR));
-#endif
+	fmtw = (WCHAR *)alloca(len_0*sizeof(WCHAR));
 	if (fmtw == NULL) { fmt=(const TCHAR *)L"no stack?"; break; }
 
 #ifndef OPENSSL_NO_MULTIBYTE

crypto/crypto-lib.com

@@ -47,11 +47,33 @@ $!  P6, if defined, sets a choice of crypto methods to compile.
 $!  WARNING: this should only be done to recompile some part of an already
 $!  fully compiled library.
 $!
+$!  P7, if defined, specifies the C pointer size.  Ignored on VAX.
+$!      ("64=ARGV" gives more efficient code with HP C V7.3 or newer.)
+$!      Supported values are:
+$!
+$!      ""       Compile with default (/NOPOINTER_SIZE)
+$!      32       Compile with /POINTER_SIZE=32 (SHORT)
+$!      64       Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV]).
+$!               (Automatically select ARGV if compiler supports it.)
+$!      64=      Compile with /POINTER_SIZE=64 (LONG).
+$!      64=ARGV  Compile with /POINTER_SIZE=64=ARGV (LONG=ARGV).
+$!
+$!  P8, if defined, specifies a directory where ZLIB files (zlib.h,
+$!  libz.olb) may be found.  Optionally, a non-default object library
+$!  name may be included ("dev:[dir]libz_64.olb", for example).
+$!
+$!
+$! Announce/identify.
+$!
+$ proc = f$environment( "procedure")
+$ write sys$output "@@@ "+ -
+   f$parse( proc, , , "name")+ f$parse( proc, , , "type")
 $!
 $! Define A TCP/IP Library That We Will Need To Link To.
 $! (That Is, If We Need To Link To One.)
 $!
 $ TCPIP_LIB = ""
+$ ZLIB_LIB = ""
 $!
 $! Check Which Architecture We Are Using.
 $!
@@ -75,6 +97,11 @@ $! End The Architecture Check.
 $!
 $ ENDIF
 $!
+$ ARCHD = ARCH
+$ LIB32 = "32"
+$ OPT_FILE = ""
+$ POINTER_SIZE = ""
+$!
 $! Define The Different Encryption Types.
 $! NOTE: Some might think this list ugly.  However, it's made this way to
 $! reflect the SDIRS variable in [-]Makefile.org as closely as possible,
@@ -91,25 +118,37 @@ $ ENCRYPT_TYPES = "Basic,"+ -
 		  "EVP,EVP_2,EVP_3,ASN1,ASN1_2,PEM,X509,X509V3,"+ -
 		  "CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5,"+ -
 		  "STORE,CMS,PQUEUE,TS,JPAKE"
-$! Define The OBJ Directory.
-$!
-$ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.CRYPTO]
-$!
-$! Define The EXE Directory.
-$!
-$ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.CRYPTO]
 $!
 $! Check To Make Sure We Have Valid Command Line Parameters.
 $!
 $ GOSUB CHECK_OPTIONS
 $!
+$! Define The OBJ and EXE Directories.
+$!
+$ OBJ_DIR := SYS$DISK:[-.'ARCHD'.OBJ.CRYPTO]
+$ EXE_DIR := SYS$DISK:[-.'ARCHD'.EXE.CRYPTO]
+$!
+$! Specify the destination directory in any /MAP option.
+$!
+$ if (LINKMAP .eqs. "MAP")
+$ then
+$   LINKMAP = LINKMAP+ "=''EXE_DIR'"
+$ endif
+$!
+$! Add the location prefix to the linker options file name.
+$!
+$ if (OPT_FILE .nes. "")
+$ then
+$   OPT_FILE = EXE_DIR+ OPT_FILE
+$ endif
+$!
 $! Initialise logical names and such
 $!
 $ GOSUB INITIALISE
 $!
 $! Tell The User What Kind of Machine We Run On.
 $!
-$ WRITE SYS$OUTPUT "Compiling On A ",ARCH," Machine."
+$ WRITE SYS$OUTPUT "Host system architecture: ''ARCHD'"
 $!
 $!
 $! Check To See If The Architecture Specific OBJ Directory Exists.
@@ -140,11 +179,11 @@ $ ENDIF
 $!
 $! Define The Library Name.
 $!
-$ LIB_NAME := 'EXE_DIR'LIBCRYPTO.OLB
+$ LIB_NAME := 'EXE_DIR'SSL_LIBCRYPTO'LIB32'.OLB
 $!
 $! Define The CRYPTO-LIB We Are To Use.
 $!
-$ CRYPTO_LIB := 'EXE_DIR'LIBCRYPTO.OLB
+$ CRYPTO_LIB := 'EXE_DIR'SSL_LIBCRYPTO'LIB32'.OLB
 $!
 $! Check To See If We Already Have A "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" Library...
 $!
@@ -193,7 +232,7 @@ $ LIB_CAST = "c_skey,c_ecb,c_enc,c_cfb64,c_ofb64"
 $ LIB_CAMELLIA = "camellia,cmll_misc,cmll_ecb,cmll_cbc,cmll_ofb,"+ -
 	"cmll_cfb,cmll_ctr"
 $ LIB_SEED = "seed,seed_ecb,seed_cbc,seed_cfb,seed_ofb"
-$ LIB_MODES = "cbc128,ctr128,cfb128,ofb128"
+$ LIB_MODES = "cbc128,ctr128,cts128,cfb128,ofb128"
 $ LIB_BN_ASM = "[.asm]vms.mar,vms-helper"
 $ IF F$TRNLNM("OPENSSL_NO_ASM") .OR. ARCH .NES. "VAX" THEN -
      LIB_BN_ASM = "bn_asm"
@@ -301,15 +340,23 @@ $ LIB_JPAKE = "jpake,jpake_err"
 $!
 $! Setup exceptional compilations
 $!
-$ ! Add definitions for no threads on OpenVMS 7.1 and higher
+$ CC3_SHOWN = 0
+$ CC4_SHOWN = 0
+$ CC5_SHOWN = 0
+$ CC6_SHOWN = 0
+$!
+$! The following lists must have leading and trailing commas, and no
+$! embedded spaces.  (They are scanned for ",name,".)
+$!
+$ ! Add definitions for no threads on OpenVMS 7.1 and higher.
 $ COMPILEWITH_CC3 = ",bss_rtcp,"
-$ ! Disable the DOLLARID warning
-$ COMPILEWITH_CC4 = ",a_utctm,bss_log,o_time,o_dir"
-$ ! Disable disjoint optimization
+$ ! Disable the DOLLARID warning.  Not needed with /STANDARD=RELAXED.
+$ COMPILEWITH_CC4 = "" !!! ",a_utctm,bss_log,o_time,o_dir,"
+$ ! Disable disjoint optimization on VAX with DECC.
 $ COMPILEWITH_CC5 = ",md2_dgst,md4_dgst,md5_dgst,mdc2dgst," + -
                     "seed,sha_dgst,sha1dgst,rmd_dgst,bf_enc,"
-$ ! Disable the MIXLINKAGE warning
-$ COMPILEWITH_CC6 = ",enc_read,set_key,"
+$ ! Disable the MIXLINKAGE warning.
+$ COMPILEWITH_CC6 = "" !!! ",enc_read,set_key,"
 $!
 $! Figure Out What Other Modules We Are To Build.
 $!
@@ -515,31 +562,60 @@ $   WRITE SYS$OUTPUT "Compiling The ",FILE_NAME," File.  (",BUILDALL,",",STATE,"
 $ ENDIF
 $ IF (MODULE_NAME.NES."")
 $ THEN 
-$   WRITE SYS$OUTPUT "	",FILE_NAME,""
+$   WRITE SYS$OUTPUT "        ",FILE_NAME,""
 $ ENDIF
 $!
 $! Compile The File.
 $!
 $ ON ERROR THEN GOTO NEXT_FILE
-$ FILE_NAME0 = F$ELEMENT(0,".",FILE_NAME)
+$ FILE_NAME0 = ","+ F$ELEMENT(0,".",FILE_NAME)+ ","
 $ IF FILE_NAME - ".mar" .NES. FILE_NAME
 $ THEN
 $   MACRO/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
 $ ELSE
 $   IF COMPILEWITH_CC3 - FILE_NAME0 .NES. COMPILEWITH_CC3
 $   THEN
+$     write sys$output "        \Using special rule (3)"
+$     if (.not. CC3_SHOWN)
+$     then
+$       CC3_SHOWN = 1
+$       x = "    "+ CC3
+$       write /symbol sys$output x
+$     endif
 $     CC3/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
 $   ELSE
 $     IF COMPILEWITH_CC4 - FILE_NAME0 .NES. COMPILEWITH_CC4
 $     THEN
+$       write /symbol sys$output "        \Using special rule (4)"
+$       if (.not. CC4_SHOWN)
+$       then
+$         CC4_SHOWN = 1
+$         x = "    "+ CC4
+$         write /symbol sys$output x
+$       endif
 $       CC4/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
 $     ELSE
-$       IF COMPILEWITH_CC5 - FILE_NAME0 .NES. COMPILEWITH_CC5
+$       IF CC5_DIFFERENT .AND. -
+         (COMPILEWITH_CC5 - FILE_NAME0 .NES. COMPILEWITH_CC5)
 $       THEN
+$         write sys$output "        \Using special rule (5)"
+$         if (.not. CC5_SHOWN)
+$         then
+$           CC5_SHOWN = 1
+$           x = "    "+ CC5
+$           write /symbol sys$output x
+$         endif
 $         CC5/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
 $       ELSE
 $         IF COMPILEWITH_CC6 - FILE_NAME0 .NES. COMPILEWITH_CC6
 $         THEN
+$           write sys$output "        \Using special rule (6)"
+$           if (.not. CC6_SHOWN)
+$           then
+$             CC6_SHOWN = 1
+$             x = "    "+ CC6
+$             write /symbol sys$output x
+$           endif
 $           CC6/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
 $         ELSE
 $           CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
@@ -586,38 +662,22 @@ $!   SHOW SYMBOL APPLICATION*
 $!
 $! Tell the user what happens
 $!
-$   WRITE SYS$OUTPUT "	",APPLICATION,".exe"
+$   WRITE SYS$OUTPUT "        ",APPLICATION,".exe"
 $!
 $! Link The Program.
 $!
 $   ON ERROR THEN GOTO NEXT_APPLICATION
 $!
-$! Check To See If We Are To Link With A Specific TCP/IP Library.
+$!  Link With A TCP/IP Library.
 $!
-$   IF (TCPIP_LIB.NES."")
-$   THEN
+$   LINK /'DEBUGGER' /'LINKMAP' /'TRACEBACK' -
+     /EXE='EXE_DIR''APPLICATION'.EXE -
+     'OBJ_DIR''APPLICATION_OBJECTS', -
+     'CRYPTO_LIB'/LIBRARY -
+     'TCPIP_LIB' -
+     'ZLIB_LIB' -
+     ,'OPT_FILE' /OPTIONS
 $!
-$!    Link With A TCP/IP Library.
-$!
-$     LINK/'DEBUGGER'/'TRACEBACK'/EXE='EXE_DIR''APPLICATION'.EXE -
-          'OBJ_DIR''APPLICATION_OBJECTS', -
-	  'CRYPTO_LIB'/LIBRARY, -
-          'TCPIP_LIB','OPT_FILE'/OPTION
-$!
-$! Else...
-$!
-$   ELSE
-$!
-$!    Don't Link With A TCP/IP Library.
-$!
-$     LINK/'DEBUGGER'/'TRACEBACK'/EXE='EXE_DIR''APPLICATION'.EXE -
-          'OBJ_DIR''APPLICATION_OBJECTS',-
-	  'CRYPTO_LIB'/LIBRARY, -
-          'OPT_FILE'/OPTION
-$!
-$! End The TCP/IP Library Check.
-$!
-$   ENDIF
 $   GOTO NEXT_APPLICATION
 $  APPLICATION_DONE:
 $ ENDIF
@@ -656,7 +716,7 @@ $!
 $     CREATE 'OPT_FILE'
 $DECK
 !
-! Default System Options File To Link Agianst 
+! Default System Options File To Link Against 
 ! The Sharable VAX C Runtime Library.
 !
 SYS$SHARE:VAXCRTL.EXE/SHARE
@@ -685,7 +745,7 @@ $!
 $     CREATE 'OPT_FILE'
 $DECK
 !
-! Default System Options File To Link Agianst 
+! Default System Options File To Link Against 
 ! The Sharable C Runtime Library.
 !
 GNU_CC:[000000]GCCLIB/LIBRARY
@@ -720,7 +780,7 @@ $!
 $       CREATE 'OPT_FILE'
 $DECK
 !
-! Default System Options File To Link Agianst 
+! Default System Options File To Link Against 
 ! The Sharable DEC C Runtime Library.
 !
 SYS$SHARE:DECC$SHR.EXE/SHARE
@@ -735,7 +795,7 @@ $!
 $       CREATE 'OPT_FILE'
 $DECK
 !
-! Default System Options File For non-VAX To Link Agianst 
+! Default System Options File For non-VAX To Link Against 
 ! The Sharable C Runtime Library.
 !
 SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE
@@ -803,8 +863,8 @@ $     WRITE SYS$OUTPUT "    APPS     :  To Compile Just The [.xxx.EXE.CRYPTO]*.E
 $     WRITE SYS$OUTPUT ""
 $     WRITE SYS$OUTPUT " Where 'xxx' Stands For:"
 $     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "    ALPHA    :  Alpha Architecture."
-$     WRITE SYS$OUTPUT "    IA64     :  IA64 Architecture."
+$     WRITE SYS$OUTPUT "    ALPHA[64]:  Alpha Architecture."
+$     WRITE SYS$OUTPUT "    IA64[64] :  IA64 Architecture."
 $     WRITE SYS$OUTPUT "    VAX      :  VAX Architecture."
 $     WRITE SYS$OUTPUT ""
 $!
@@ -825,15 +885,16 @@ $!
 $ IF (P2.EQS."NODEBUG")
 $ THEN
 $!
-$!   P2 Is NODEBUG, So Compile Without The Debugger Information.
+$!  P2 Is NODEBUG, So Compile Without The Debugger Information.
 $!
-$    DEBUGGER = "NODEBUG"
-$    TRACEBACK = "NOTRACEBACK" 
-$    GCC_OPTIMIZE = "OPTIMIZE"
-$    CC_OPTIMIZE = "OPTIMIZE"
-$    MACRO_OPTIMIZE = "OPTIMIZE"
-$    WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
-$    WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
+$   DEBUGGER = "NODEBUG"
+$   LINKMAP = "NOMAP"
+$   TRACEBACK = "NOTRACEBACK" 
+$   GCC_OPTIMIZE = "OPTIMIZE"
+$   CC_OPTIMIZE = "OPTIMIZE"
+$   MACRO_OPTIMIZE = "OPTIMIZE"
+$   WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
+$   WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
 $ ELSE
 $!
 $!  Check To See If We Are To Compile With Debugger Information.
@@ -844,6 +905,7 @@ $!
 $!    Compile With Debugger Information.
 $!
 $     DEBUGGER = "DEBUG"
+$     LINKMAP = "MAP"
 $     TRACEBACK = "TRACEBACK"
 $     GCC_OPTIMIZE = "NOOPTIMIZE"
 $     CC_OPTIMIZE = "NOOPTIMIZE"
@@ -852,7 +914,7 @@ $     WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile."
 $     WRITE SYS$OUTPUT "Compiling Without Compiler Optimization."
 $   ELSE 
 $!
-$!    They Entered An Invalid Option..
+$!    They Entered An Invalid Option.
 $!
 $     WRITE SYS$OUTPUT ""
 $     WRITE SYS$OUTPUT "The Option ",P2," Is Invalid.  The Valid Options Are:"
@@ -907,6 +969,60 @@ $! End The P5 Check.
 $!
 $ ENDIF
 $!
+$! Check P7 (POINTER_SIZE).
+$!
+$ IF (P7 .NES. "") .AND. (ARCH .NES. "VAX")
+$ THEN
+$!
+$   IF (P7 .EQS. "32")
+$   THEN
+$     POINTER_SIZE = " /POINTER_SIZE=32"
+$   ELSE
+$     POINTER_SIZE = F$EDIT( P7, "COLLAPSE, UPCASE")
+$     IF ((POINTER_SIZE .EQS. "64") .OR. -
+       (POINTER_SIZE .EQS. "64=") .OR. -
+       (POINTER_SIZE .EQS. "64=ARGV"))
+$     THEN
+$       ARCHD = ARCH+ "_64"
+$       LIB32 = ""
+$       POINTER_SIZE = " /POINTER_SIZE=64"
+$     ELSE
+$!
+$!      Tell The User Entered An Invalid Option.
+$!
+$       WRITE SYS$OUTPUT ""
+$       WRITE SYS$OUTPUT "The Option ", P7, -
+         " Is Invalid.  The Valid Options Are:"
+$       WRITE SYS$OUTPUT ""
+$       WRITE SYS$OUTPUT -
+         "    """"       :  Compile with default (short) pointers."
+$       WRITE SYS$OUTPUT -
+         "    32       :  Compile with 32-bit (short) pointers."
+$       WRITE SYS$OUTPUT -
+         "    64       :  Compile with 64-bit (long) pointers (auto ARGV)."
+$       WRITE SYS$OUTPUT -
+         "    64=      :  Compile with 64-bit (long) pointers (no ARGV)."
+$       WRITE SYS$OUTPUT -
+         "    64=ARGV  :  Compile with 64-bit (long) pointers (ARGV)."
+$       WRITE SYS$OUTPUT ""
+$! 
+$!      Time To EXIT.
+$!
+$       EXIT
+$!
+$     ENDIF
+$!
+$   ENDIF
+$!
+$! End The P7 (POINTER_SIZE) Check.
+$!
+$ ENDIF
+$!
+$! Set basic C compiler /INCLUDE directories.
+$!
+$ CC_INCLUDES = "SYS$DISK:[.''ARCHD'],SYS$DISK:[],SYS$DISK:[-],"+ -
+   "SYS$DISK:[.ENGINE.VENDOR_DEFNS],SYS$DISK:[.EVP],SYS$DISK:[.ASN1]"
+$!
 $! Check To See If P3 Is Blank.
 $!
 $ IF (P3.EQS."")
@@ -1007,11 +1123,64 @@ $ CCDEFS = "TCPIP_TYPE_''P4',DSO_VMS"
 $ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
 $ CCEXTRAFLAGS = ""
 $ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
-$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
+$ CCDISABLEWARNINGS = "" !!! "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
 $ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
 	CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS
 $!
-$!  Check To See If The User Entered A Valid Paramter.
+$! Check To See If We Have A ZLIB Option.
+$!
+$ ZLIB = P8
+$ IF (ZLIB .NES. "")
+$ THEN
+$!
+$!  Check for expected ZLIB files.
+$!
+$   err = 0
+$   file1 = f$parse( "zlib.h", ZLIB, , , "SYNTAX_ONLY")
+$   if (f$search( file1) .eqs. "")
+$   then
+$     WRITE SYS$OUTPUT ""
+$     WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
+$     WRITE SYS$OUTPUT "    Can't find header: ''file1'"
+$     err = 1
+$   endif
+$   file1 = f$parse( "A.;", ZLIB)- "A.;"
+$!
+$   file2 = f$parse( ZLIB, "libz.olb", , , "SYNTAX_ONLY")
+$   if (f$search( file2) .eqs. "")
+$   then
+$     if (err .eq. 0)
+$     then
+$       WRITE SYS$OUTPUT ""
+$       WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
+$     endif
+$     WRITE SYS$OUTPUT "    Can't find library: ''file2'"
+$     WRITE SYS$OUTPUT ""
+$     err = err+ 2
+$   endif
+$   if (err .eq. 1)
+$   then
+$     WRITE SYS$OUTPUT ""
+$   endif
+$!
+$   if (err .ne. 0)
+$   then
+$     EXIT
+$   endif
+$!
+$   CCDEFS = """ZLIB=1"", "+ CCDEFS
+$   CC_INCLUDES = CC_INCLUDES+ ", "+ file1
+$   ZLIB_LIB = ", ''file2' /library"
+$!
+$!  Print info
+$!
+$   WRITE SYS$OUTPUT "ZLIB library spec: ", file2
+$!
+$! End The ZLIB Check.
+$!
+$ ENDIF
+$!
+$!  Check To See If The User Entered A Valid Parameter.
 $!
 $ IF (P3.EQS."VAXC").OR.(P3.EQS."DECC").OR.(P3.EQS."GNUC")
 $ THEN
@@ -1034,14 +1203,14 @@ $!
 $     CC = "CC"
 $     IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
 	 THEN CC = "CC/DECC"
-$     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89" + -
-           "/NOLIST/PREFIX=ALL" + -
-	   "/INCLUDE=(SYS$DISK:[],SYS$DISK:[._''ARCH'],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS],SYS$DISK:[.EVP],SYS$DISK:[.ASN1])" + -
-	   CCEXTRAFLAGS
+$     CC = CC + " /''CC_OPTIMIZE' /''DEBUGGER' /STANDARD=RELAXED"+ -
+       "''POINTER_SIZE' /NOLIST /PREFIX=ALL" + -
+       " /INCLUDE=(''CC_INCLUDES')"+ -
+       CCEXTRAFLAGS
 $!
 $!    Define The Linker Options File Name.
 $!
-$     OPT_FILE = "''EXE_DIR'VAX_DECC_OPTIONS.OPT"
+$     OPT_FILE = "VAX_DECC_OPTIONS.OPT"
 $!
 $!  End DECC Check.
 $!
@@ -1070,7 +1239,7 @@ $	EXIT
 $     ENDIF
 $     IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
 $     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
-	   "/INCLUDE=(SYS$DISK:[],SYS$DISK:[._''ARCH'],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS],SYS$DISK:[.EVP],SYS$DISK:[.ASN1])" + -
+       "/INCLUDE=(''CC_INCLUDES')"+ -
 	   CCEXTRAFLAGS
 $     CCDEFS = """VAXC""," + CCDEFS
 $!
@@ -1080,7 +1249,7 @@ $     DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB]
 $!
 $!    Define The Linker Options File Name.
 $!
-$     OPT_FILE = "''EXE_DIR'VAX_VAXC_OPTIONS.OPT"
+$     OPT_FILE = "VAX_VAXC_OPTIONS.OPT"
 $!
 $!  End VAXC Check
 $!
@@ -1102,12 +1271,12 @@ $!
 $!    Use GNU C...
 $!
 $     CC = "GCC/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
-	   "/INCLUDE=(SYS$DISK:[],SYS$DISK:[._''ARCH'],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS],SYS$DISK:[.EVP],SYS$DISK:[.ASN1])" + -
+       "/INCLUDE=(''CC_INCLUDES')"+ -
 	   CCEXTRAFLAGS
 $!
 $!    Define The Linker Options File Name.
 $!
-$     OPT_FILE = "''EXE_DIR'VAX_GNUC_OPTIONS.OPT"
+$     OPT_FILE = "VAX_GNUC_OPTIONS.OPT"
 $!
 $!  End The GNU C Check.
 $!
@@ -1128,22 +1297,24 @@ $       CC6DISABLEWARNINGS = "MIXLINKAGE"
 $     ELSE
 $       CC4DISABLEWARNINGS = CCDISABLEWARNINGS + ",DOLLARID"
 $       CC6DISABLEWARNINGS = CCDISABLEWARNINGS + ",MIXLINKAGE"
-$       CCDISABLEWARNINGS = "/WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
+$       CCDISABLEWARNINGS = " /WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
 $     ENDIF
-$     CC4DISABLEWARNINGS = "/WARNING=(DISABLE=(" + CC4DISABLEWARNINGS + "))"
-$     CC6DISABLEWARNINGS = "/WARNING=(DISABLE=(" + CC6DISABLEWARNINGS + "))"
+$     CC4DISABLEWARNINGS = " /WARNING=(DISABLE=(" + CC4DISABLEWARNINGS + "))"
+$     CC6DISABLEWARNINGS = " /WARNING=(DISABLE=(" + CC6DISABLEWARNINGS + "))"
 $   ELSE
 $     CCDISABLEWARNINGS = ""
 $     CC4DISABLEWARNINGS = ""
 $     CC6DISABLEWARNINGS = ""
 $   ENDIF
-$   CC3 = CC + "/DEFINE=(" + CCDEFS + ISSEVEN + ")" + CCDISABLEWARNINGS
-$   CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
+$   CC3 = CC + " /DEFINE=(" + CCDEFS + ISSEVEN + ")" + CCDISABLEWARNINGS
+$   CC = CC + " /DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
 $   IF ARCH .EQS. "VAX" .AND. COMPILER .EQS. "DECC" .AND. P2 .NES. "DEBUG"
 $   THEN
-$     CC5 = CC + "/OPTIMIZE=NODISJOINT"
+$     CC5 = CC + " /OPTIMIZE=NODISJOINT"
+$     CC5_DIFFERENT = 1
 $   ELSE
-$     CC5 = CC + "/NOOPTIMIZE"
+$     CC5 = CC
+$     CC5_DIFFERENT = 0
 $   ENDIF
 $   CC4 = CC - CCDISABLEWARNINGS + CC4DISABLEWARNINGS
 $   CC6 = CC - CCDISABLEWARNINGS + CC6DISABLEWARNINGS
@@ -1196,7 +1367,7 @@ $   THEN
 $!
 $!    Set the library to use SOCKETSHR
 $!
-$     TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
+$     TCPIP_LIB = ",SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT /OPTIONS"
 $!
 $!    Done with SOCKETSHR
 $!
@@ -1222,13 +1393,13 @@ $   THEN
 $!
 $!    Set the library to use UCX.
 $!
-$     TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
+$     TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT /OPTIONS"
 $     IF F$TRNLNM("UCX$IPC_SHR") .NES. ""
 $     THEN
-$       TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT"
+$       TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT /OPTIONS"
 $     ELSE
 $       IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN -
-	  TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT"
+	  TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT /OPTIONS"
 $     ENDIF
 $!
 $!    Done with UCX
@@ -1242,7 +1413,7 @@ $   THEN
 $!
 $!    Set the library to use TCPIP (post UCX).
 $!
-$     TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
+$     TCPIP_LIB = ",SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT /OPTIONS"
 $!
 $!    Done with TCPIP
 $!
@@ -1263,7 +1434,7 @@ $   ENDIF
 $!
 $!  Print info
 $!
-$   WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB
+$   WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB- ","
 $!
 $!  Else The User Entered An Invalid Argument.
 $!

crypto/dsa/dsa_ossl.c

@@ -148,15 +148,6 @@ static DSA_SIG *dsa_do_sign(const unsigned char *dgst, int dlen, DSA *dsa)
 
 	s=BN_new();
 	if (s == NULL) goto err;
-
-	/* reject a excessive digest length (currently at most
-	 * dsa-with-SHA256 is supported) */
-	if (dlen > SHA256_DIGEST_LENGTH)
-		{
-		reason=DSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE;
-		goto err;
-		}
-
 	ctx=BN_CTX_new();
 	if (ctx == NULL) goto err;
 
@@ -185,7 +176,7 @@ static DSA_SIG *dsa_do_sign(const unsigned char *dgst, int dlen, DSA *dsa)
 	if (!BN_mod_mul(&xr,dsa->priv_key,r,dsa->q,ctx)) goto err;/* s = xr */
 	if (!BN_add(s, &xr, &m)) goto err;		/* s = m + xr */
 	if (BN_cmp(s,dsa->q) > 0)
-		BN_sub(s,s,dsa->q);
+		if (!BN_sub(s,s,dsa->q)) goto err;
 	if (!BN_mod_mul(s,s,kinv,dsa->q,ctx)) goto err;
 
 	ret=DSA_SIG_new();
@@ -325,15 +316,6 @@ static int dsa_do_verify(const unsigned char *dgst, int dgst_len, DSA_SIG *sig,
 		DSAerr(DSA_F_DSA_DO_VERIFY,DSA_R_MODULUS_TOO_LARGE);
 		return -1;
 		}
-
-	/* reject a excessive digest length (currently at most
-	 * dsa-with-SHA256 is supported) */
-	if (dgst_len > SHA256_DIGEST_LENGTH)
-		{
-		DSAerr(DSA_F_DSA_DO_VERIFY,DSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE);
-		return -1;
-		}
-
 	BN_init(&u1);
 	BN_init(&u2);
 	BN_init(&t1);

crypto/dsa/dsa_pmeth.c

@@ -187,6 +187,7 @@ static int pkey_dsa_ctrl(EVP_PKEY_CTX *ctx, int type, int p1, void *p2)
 		case EVP_PKEY_CTRL_MD:
 		if (EVP_MD_type((const EVP_MD *)p2) != NID_sha1   &&
 		    EVP_MD_type((const EVP_MD *)p2) != NID_dsa    &&
+		    EVP_MD_type((const EVP_MD *)p2) != NID_dsaWithSHA    &&
 		    EVP_MD_type((const EVP_MD *)p2) != NID_sha224 &&
 		    EVP_MD_type((const EVP_MD *)p2) != NID_sha256)
 			{

crypto/dso/dso_dlfcn.c

@@ -85,6 +85,7 @@ DSO_METHOD *DSO_METHOD_dlfcn(void)
 # define HAVE_DLINFO 1
 # if defined(_AIX) || defined(__CYGWIN__) || \
      defined(__SCO_VERSION__) || defined(_SCO_ELF) || \
+     (defined(__osf__) && !defined(RTLD_NEXT))     || \
      (defined(__OpenBSD__) && !defined(RTLD_SELF))
 #  undef HAVE_DLINFO
 # endif

crypto/dso/dso_vms.c

@@ -68,8 +68,20 @@
 #include <stsdef.h>
 #include <descrip.h>
 #include <starlet.h>
+#include "vms_rms.h"
 #endif
 
+/* Some compiler options may mask the declaration of "_malloc32". */
+#if __INITIAL_POINTER_SIZE && defined _ANSI_C_SOURCE
+# if __INITIAL_POINTER_SIZE == 64
+#  pragma pointer_size save
+#  pragma pointer_size 32
+    void * _malloc32  (__size_t);
+#  pragma pointer_size restore
+# endif /* __INITIAL_POINTER_SIZE == 64 */
+#endif /* __INITIAL_POINTER_SIZE && defined _ANSI_C_SOURCE */
+
+
 #ifndef OPENSSL_SYS_VMS
 DSO_METHOD *DSO_METHOD_vms(void)
 	{
@@ -121,14 +133,13 @@ typedef struct dso_internal_st
 	/* This should contain the name only, no directory,
 	 * no extension, nothing but a name. */
 	struct dsc$descriptor_s filename_dsc;
-	char filename[FILENAME_MAX+1];
+	char filename[ NAMX_MAXRSS+ 1];
 	/* This contains whatever is not in filename, if needed.
 	 * Normally not defined. */
 	struct dsc$descriptor_s imagename_dsc;
-	char imagename[FILENAME_MAX+1];
+	char imagename[ NAMX_MAXRSS+ 1];
 	} DSO_VMS_INTERNAL;
 
-
 DSO_METHOD *DSO_METHOD_vms(void)
 	{
 	return(&dso_meth_vms);
@@ -139,7 +150,22 @@ static int vms_load(DSO *dso)
 	void *ptr = NULL;
 	/* See applicable comments in dso_dl.c */
 	char *filename = DSO_convert_filename(dso, NULL);
-	DSO_VMS_INTERNAL *p;
+
+/* Ensure 32-bit pointer for "p", and appropriate malloc() function. */
+#if __INITIAL_POINTER_SIZE == 64
+# define DSO_MALLOC _malloc32
+# pragma pointer_size save
+# pragma pointer_size 32
+#else /* __INITIAL_POINTER_SIZE == 64 */
+# define DSO_MALLOC OPENSSL_malloc
+#endif /* __INITIAL_POINTER_SIZE == 64 [else] */
+
+	DSO_VMS_INTERNAL *p = NULL;
+
+#if __INITIAL_POINTER_SIZE == 64
+# pragma pointer_size restore
+#endif /* __INITIAL_POINTER_SIZE == 64 */
+
 	const char *sp1, *sp2;	/* Search result */
 
 	if(filename == NULL)
@@ -192,7 +218,7 @@ static int vms_load(DSO *dso)
 		goto err;
 		}
 
-	p = (DSO_VMS_INTERNAL *)OPENSSL_malloc(sizeof(DSO_VMS_INTERNAL));
+	p = DSO_MALLOC(sizeof(DSO_VMS_INTERNAL));
 	if(p == NULL)
 		{
 		DSOerr(DSO_F_VMS_LOAD,ERR_R_MALLOC_FAILURE);
@@ -290,18 +316,38 @@ void vms_bind_sym(DSO *dso, const char *symname, void **sym)
 	int flags = 0;
 #endif
 	struct dsc$descriptor_s symname_dsc;
-	*sym = NULL;
 
-	symname_dsc.dsc$w_length = strlen(symname);
-	symname_dsc.dsc$b_dtype = DSC$K_DTYPE_T;
-	symname_dsc.dsc$b_class = DSC$K_CLASS_S;
-	symname_dsc.dsc$a_pointer = (char *)symname; /* The cast is needed */
+/* Arrange 32-bit pointer to (copied) string storage, if needed. */
+#if __INITIAL_POINTER_SIZE == 64
+# define SYMNAME symname_32p
+# pragma pointer_size save
+# pragma pointer_size 32
+	char *symname_32p;
+# pragma pointer_size restore
+	char symname_32[ NAMX_MAXRSS+ 1];
+#else /* __INITIAL_POINTER_SIZE == 64 */
+# define SYMNAME ((char *) symname)
+#endif /* __INITIAL_POINTER_SIZE == 64 [else] */
+
+	*sym = NULL;
 
 	if((dso == NULL) || (symname == NULL))
 		{
 		DSOerr(DSO_F_VMS_BIND_SYM,ERR_R_PASSED_NULL_PARAMETER);
 		return;
 		}
+
+#if __INITIAL_POINTER_SIZE == 64
+	/* Copy the symbol name to storage with a 32-bit pointer. */
+	symname_32p = symname_32;
+	strcpy( symname_32p, symname);
+#endif /* __INITIAL_POINTER_SIZE == 64 [else] */
+
+	symname_dsc.dsc$w_length = strlen(SYMNAME);
+	symname_dsc.dsc$b_dtype = DSC$K_DTYPE_T;
+	symname_dsc.dsc$b_class = DSC$K_CLASS_S;
+	symname_dsc.dsc$a_pointer = SYMNAME;
+
 	if(sk_void_num(dso->meth_data) < 1)
 		{
 		DSOerr(DSO_F_VMS_BIND_SYM,DSO_R_STACK_ERROR);
@@ -372,64 +418,60 @@ static DSO_FUNC_TYPE vms_bind_func(DSO *dso, const char *symname)
 	return sym;
 	}
 
+
 static char *vms_merger(DSO *dso, const char *filespec1, const char *filespec2)
 	{
 	int status;
 	int filespec1len, filespec2len;
 	struct FAB fab;
-#ifdef NAML$C_MAXRSS
-	struct NAML nam;
-	char esa[NAML$C_MAXRSS];
-#else
-	struct NAM nam;
-	char esa[NAM$C_MAXRSS];
-#endif
+	struct NAMX_STRUCT nam;
+	char esa[ NAMX_MAXRSS+ 1];
 	char *merged;
 
+/* Arrange 32-bit pointer to (copied) string storage, if needed. */
+#if __INITIAL_POINTER_SIZE == 64
+# define FILESPEC1 filespec1_32p;
+# define FILESPEC2 filespec2_32p;
+# pragma pointer_size save
+# pragma pointer_size 32
+	char *filespec1_32p;
+	char *filespec2_32p;
+# pragma pointer_size restore
+	char filespec1_32[ NAMX_MAXRSS+ 1];
+	char filespec2_32[ NAMX_MAXRSS+ 1];
+#else /* __INITIAL_POINTER_SIZE == 64 */
+# define FILESPEC1 ((char *) filespec1)
+# define FILESPEC2 ((char *) filespec2)
+#endif /* __INITIAL_POINTER_SIZE == 64 [else] */
+
 	if (!filespec1) filespec1 = "";
 	if (!filespec2) filespec2 = "";
 	filespec1len = strlen(filespec1);
 	filespec2len = strlen(filespec2);
 
-	fab = cc$rms_fab;
-#ifdef NAML$C_MAXRSS
-	nam = cc$rms_naml;
-#else
-	nam = cc$rms_nam;
-#endif
+#if __INITIAL_POINTER_SIZE == 64
+	/* Copy the file names to storage with a 32-bit pointer. */
+	filespec1_32p = filespec1_32;
+	filespec2_32p = filespec2_32;
+	strcpy( filespec1_32p, filespec1);
+	strcpy( filespec2_32p, filespec2);
+#endif /* __INITIAL_POINTER_SIZE == 64 [else] */
 
-	fab.fab$l_fna = (char *)filespec1;
-	fab.fab$b_fns = filespec1len;
-	fab.fab$l_dna = (char *)filespec2;
-	fab.fab$b_dns = filespec2len;
-#ifdef NAML$C_MAXRSS
-	if (filespec1len > NAM$C_MAXRSS)
-		{
-		fab.fab$l_fna = 0;
-		fab.fab$b_fns = 0;
-		nam.naml$l_long_filename = (char *)filespec1;
-		nam.naml$l_long_filename_size = filespec1len;
-		}
-	if (filespec2len > NAM$C_MAXRSS)
-		{
-		fab.fab$l_dna = 0;
-		fab.fab$b_dns = 0;
-		nam.naml$l_long_defname = (char *)filespec2;
-		nam.naml$l_long_defname_size = filespec2len;
-		}
-	nam.naml$l_esa = esa;
-	nam.naml$b_ess = NAM$C_MAXRSS;
-	nam.naml$l_long_expand = esa;
-	nam.naml$l_long_expand_alloc = sizeof(esa);
-	nam.naml$b_nop = NAM$M_SYNCHK | NAM$M_PWD;
-	nam.naml$v_no_short_upcase = 1;
-	fab.fab$l_naml = &nam;
-#else
-	nam.nam$l_esa = esa;
-	nam.nam$b_ess = NAM$C_MAXRSS;
-	nam.nam$b_nop = NAM$M_SYNCHK | NAM$M_PWD;
-	fab.fab$l_nam = &nam;
-#endif
+	fab = cc$rms_fab;
+	nam = CC_RMS_NAMX;
+
+	FAB_OR_NAML( fab, nam).FAB_OR_NAML_FNA = FILESPEC1;
+	FAB_OR_NAML( fab, nam).FAB_OR_NAML_FNS = filespec1len;
+	FAB_OR_NAML( fab, nam).FAB_OR_NAML_DNA = FILESPEC2;
+	FAB_OR_NAML( fab, nam).FAB_OR_NAML_DNS = filespec2len;
+	NAMX_DNA_FNA_SET( fab)
+
+	nam.NAMX_ESA = esa;
+	nam.NAMX_ESS = NAMX_MAXRSS;
+	nam.NAMX_NOP = NAM$M_SYNCHK | NAM$M_PWD;
+	SET_NAMX_NO_SHORT_UPCASE( nam);
+
+	fab.FAB_NAMX = &nam;
 
 	status = sys$parse(&fab, 0, 0);
 
@@ -460,33 +502,12 @@ static char *vms_merger(DSO *dso, const char *filespec1, const char *filespec2)
 			}
 		return(NULL);
 		}
-#ifdef NAML$C_MAXRSS
-	if (nam.naml$l_long_expand_size)
-		{
-		merged = OPENSSL_malloc(nam.naml$l_long_expand_size + 1);
-		if(!merged)
-			goto malloc_err;
-		strncpy(merged, nam.naml$l_long_expand,
-			nam.naml$l_long_expand_size);
-		merged[nam.naml$l_long_expand_size] = '\0';
-		}
-	else
-		{
-		merged = OPENSSL_malloc(nam.naml$b_esl + 1);
-		if(!merged)
-			goto malloc_err;
-		strncpy(merged, nam.naml$l_esa,
-			nam.naml$b_esl);
-		merged[nam.naml$b_esl] = '\0';
-		}
-#else
-	merged = OPENSSL_malloc(nam.nam$b_esl + 1);
+
+	merged = OPENSSL_malloc( nam.NAMX_ESL+ 1);
 	if(!merged)
 		goto malloc_err;
-	strncpy(merged, nam.nam$l_esa,
-		nam.nam$b_esl);
-	merged[nam.nam$b_esl] = '\0';
-#endif
+	strncpy( merged, nam.NAMX_ESA, nam.NAMX_ESL);
+	merged[ nam.NAMX_ESL] = '\0';
 	return(merged);
  malloc_err:
 	DSOerr(DSO_F_VMS_MERGER,

crypto/ec/ec2_mult.c

@@ -319,6 +319,7 @@ int ec_GF2m_simple_mul(const EC_GROUP *group, EC_POINT *r, const BIGNUM *scalar,
 	int ret = 0;
 	size_t i;
 	EC_POINT *p=NULL;
+	EC_POINT *acc = NULL;
 
 	if (ctx == NULL)
 		{
@@ -338,15 +339,16 @@ int ec_GF2m_simple_mul(const EC_GROUP *group, EC_POINT *r, const BIGNUM *scalar,
 		}
 
 	if ((p = EC_POINT_new(group)) == NULL) goto err;
+	if ((acc = EC_POINT_new(group)) == NULL) goto err;
 
-	if (!EC_POINT_set_to_infinity(group, r)) goto err;
+	if (!EC_POINT_set_to_infinity(group, acc)) goto err;
 
 	if (scalar)
 		{
 		if (!ec_GF2m_montgomery_point_multiply(group, p, scalar, group->generator, ctx)) goto err;
 		if (BN_is_negative(scalar))
 			if (!group->meth->invert(group, p, ctx)) goto err;
-		if (!group->meth->add(group, r, r, p, ctx)) goto err;
+		if (!group->meth->add(group, acc, acc, p, ctx)) goto err;
 		}
 
 	for (i = 0; i < num; i++)
@@ -354,13 +356,16 @@ int ec_GF2m_simple_mul(const EC_GROUP *group, EC_POINT *r, const BIGNUM *scalar,
 		if (!ec_GF2m_montgomery_point_multiply(group, p, scalars[i], points[i], ctx)) goto err;
 		if (BN_is_negative(scalars[i]))
 			if (!group->meth->invert(group, p, ctx)) goto err;
-		if (!group->meth->add(group, r, r, p, ctx)) goto err;
+		if (!group->meth->add(group, acc, acc, p, ctx)) goto err;
 		}
 
+	if (!EC_POINT_copy(r, acc)) goto err;
+
 	ret = 1;
 
   err:
 	if (p) EC_POINT_free(p);
+	if (acc) EC_POINT_free(acc);
 	if (new_ctx != NULL)
 		BN_CTX_free(new_ctx);
 	return ret;

crypto/ec/ec2_smpl.c

@@ -887,7 +887,7 @@ int ec_GF2m_simple_is_on_curve(const EC_GROUP *group, const EC_POINT *point, BN_
 	field_sqr = group->meth->field_sqr;	
 
 	/* only support affine coordinates */
-	if (!point->Z_is_one) goto err;
+	if (!point->Z_is_one) return -1;
 
 	if (ctx == NULL)
 		{
@@ -938,6 +938,9 @@ int ec_GF2m_simple_cmp(const EC_GROUP *group, const EC_POINT *a, const EC_POINT
 		return EC_POINT_is_at_infinity(group, b) ? 0 : 1;
 		}
 
+	if (EC_POINT_is_at_infinity(group, b))
+		return 1;
+	
 	if (a->Z_is_one && b->Z_is_one)
 		{
 		return ((BN_cmp(&a->X, &b->X) == 0) && BN_cmp(&a->Y, &b->Y) == 0) ? 0 : 1;

crypto/ec/ec_key.c

@@ -305,6 +305,12 @@ int EC_KEY_check_key(const EC_KEY *eckey)
 		return 0;
 		}
 
+	if (EC_POINT_is_at_infinity(eckey->group, eckey->pub_key))
+		{
+		ECerr(EC_F_EC_KEY_CHECK_KEY, EC_R_POINT_AT_INFINITY);
+		goto err;
+		}
+
 	if ((ctx = BN_CTX_new()) == NULL)
 		goto err;
 	if ((point = EC_POINT_new(eckey->group)) == NULL)

crypto/ec/ec_mult.c

@@ -169,11 +169,13 @@ static void ec_pre_comp_clear_free(void *pre_)
 		EC_POINT **p;
 
 		for (p = pre->points; *p != NULL; p++)
+			{
 			EC_POINT_clear_free(*p);
-		OPENSSL_cleanse(pre->points, sizeof pre->points);
+			OPENSSL_cleanse(p, sizeof *p);
+			}
 		OPENSSL_free(pre->points);
 		}
-	OPENSSL_cleanse(pre, sizeof pre);
+	OPENSSL_cleanse(pre, sizeof *pre);
 	OPENSSL_free(pre);
 	}
 

crypto/ec/ecp_smpl.c

@@ -1407,6 +1407,9 @@ int ec_GFp_simple_cmp(const EC_GROUP *group, const EC_POINT *a, const EC_POINT *
 		return EC_POINT_is_at_infinity(group, b) ? 0 : 1;
 		}
 
+	if (EC_POINT_is_at_infinity(group, b))
+		return 1;
+	
 	if (a->Z_is_one && b->Z_is_one)
 		{
 		return ((BN_cmp(&a->X, &b->X) == 0) && BN_cmp(&a->Y, &b->Y) == 0) ? 0 : 1;

crypto/ecdsa/ecdsatest.c

@@ -168,8 +168,7 @@ int fbytes(unsigned char *buf, int num)
 		return 0;
 		}
 	fbytes_counter ++;
-	ret = BN_bn2bin(tmp, buf);	
-	if (ret == 0 || ret != num)
+	if (num != BN_num_bytes(tmp) || !BN_bn2bin(tmp, buf))
 		ret = 0;
 	else 
 		ret = 1;
@@ -287,9 +286,12 @@ int test_builtin(BIO *out)
 	size_t		crv_len = 0, n = 0;
 	EC_KEY		*eckey = NULL, *wrong_eckey = NULL;
 	EC_GROUP	*group;
+	ECDSA_SIG	*ecdsa_sig = NULL;
 	unsigned char	digest[20], wrong_digest[20];
 	unsigned char	*signature = NULL;
-	unsigned int	sig_len;
+	unsigned char	*sig_ptr;
+	unsigned char	*raw_buf = NULL;
+	unsigned int	sig_len, degree, r_len, s_len, bn_len, buf_len;
 	int		nid, ret =  0;
 	
 	/* fill digest values with some random data */
@@ -339,7 +341,8 @@ int test_builtin(BIO *out)
 		if (EC_KEY_set_group(eckey, group) == 0)
 			goto builtin_err;
 		EC_GROUP_free(group);
-		if (EC_GROUP_get_degree(EC_KEY_get0_group(eckey)) < 160)
+		degree = EC_GROUP_get_degree(EC_KEY_get0_group(eckey));
+		if (degree < 160)
 			/* drop the curve */ 
 			{
 			EC_KEY_free(eckey);
@@ -415,26 +418,89 @@ int test_builtin(BIO *out)
 			}
 		BIO_printf(out, ".");
 		(void)BIO_flush(out);
-		/* modify a single byte of the signature */
-		offset = signature[10] % sig_len;
-		dirt   = signature[11];
-		signature[offset] ^= dirt ? dirt : 1; 
+		/* wrong length */
+		if (ECDSA_verify(0, digest, 20, signature, sig_len - 1,
+			eckey) == 1)
+			{
+			BIO_printf(out, " failed\n");
+			goto builtin_err;
+			}
+		BIO_printf(out, ".");
+		(void)BIO_flush(out);
+
+		/* Modify a single byte of the signature: to ensure we don't
+		 * garble the ASN1 structure, we read the raw signature and
+		 * modify a byte in one of the bignums directly. */
+		sig_ptr = signature;
+		if ((ecdsa_sig = d2i_ECDSA_SIG(NULL, &sig_ptr, sig_len)) == NULL)
+			{
+			BIO_printf(out, " failed\n");
+			goto builtin_err;
+			}
+
+		/* Store the two BIGNUMs in raw_buf. */
+		r_len = BN_num_bytes(ecdsa_sig->r);
+		s_len = BN_num_bytes(ecdsa_sig->s);
+		bn_len = (degree + 7) / 8;
+		if ((r_len > bn_len) || (s_len > bn_len))
+			{
+			BIO_printf(out, " failed\n");
+			goto builtin_err;
+			}
+		buf_len = 2 * bn_len;
+		if ((raw_buf = OPENSSL_malloc(buf_len)) == NULL)
+			goto builtin_err;
+		/* Pad the bignums with leading zeroes. */
+		memset(raw_buf, 0, buf_len);
+		BN_bn2bin(ecdsa_sig->r, raw_buf + bn_len - r_len);
+		BN_bn2bin(ecdsa_sig->s, raw_buf + buf_len - s_len);
+
+		/* Modify a single byte in the buffer. */
+		offset = raw_buf[10] % buf_len;
+		dirt   = raw_buf[11] ? raw_buf[11] : 1;
+		raw_buf[offset] ^= dirt;
+		/* Now read the BIGNUMs back in from raw_buf. */
+		if ((BN_bin2bn(raw_buf, bn_len, ecdsa_sig->r) == NULL) ||
+			(BN_bin2bn(raw_buf + bn_len, bn_len, ecdsa_sig->s) == NULL))
+			goto builtin_err;
+
+		sig_ptr = signature;
+		sig_len = i2d_ECDSA_SIG(ecdsa_sig, &sig_ptr);
 		if (ECDSA_verify(0, digest, 20, signature, sig_len, eckey) == 1)
 			{
 			BIO_printf(out, " failed\n");
 			goto builtin_err;
 			}
+		/* Sanity check: undo the modification and verify signature. */
+		raw_buf[offset] ^= dirt;
+		if ((BN_bin2bn(raw_buf, bn_len, ecdsa_sig->r) == NULL) ||
+			(BN_bin2bn(raw_buf + bn_len, bn_len, ecdsa_sig->s) == NULL))
+			goto builtin_err;
+
+		sig_ptr = signature;
+		sig_len = i2d_ECDSA_SIG(ecdsa_sig, &sig_ptr);
+		if (ECDSA_verify(0, digest, 20, signature, sig_len, eckey) != 1)
+			{
+			BIO_printf(out, " failed\n");
+			goto builtin_err;
+			}
 		BIO_printf(out, ".");
 		(void)BIO_flush(out);
 		
 		BIO_printf(out, " ok\n");
 		/* cleanup */
+		/* clean bogus errors */
+		ERR_clear_error();
 		OPENSSL_free(signature);
 		signature = NULL;
 		EC_KEY_free(eckey);
 		eckey = NULL;
 		EC_KEY_free(wrong_eckey);
 		wrong_eckey = NULL;
+		ECDSA_SIG_free(ecdsa_sig);
+		ecdsa_sig = NULL;
+		OPENSSL_free(raw_buf);
+		raw_buf = NULL;
 		}
 
 	ret = 1;	
@@ -443,8 +509,12 @@ builtin_err:
 		EC_KEY_free(eckey);
 	if (wrong_eckey)
 		EC_KEY_free(wrong_eckey);
+	if (ecdsa_sig)
+		ECDSA_SIG_free(ecdsa_sig);
 	if (signature)
 		OPENSSL_free(signature);
+	if (raw_buf)
+		OPENSSL_free(raw_buf);
 	if (curves)
 		OPENSSL_free(curves);
 

crypto/ecdsa/ecs_ossl.c

@@ -144,6 +144,14 @@ static int ecdsa_sign_setup(EC_KEY *eckey, BN_CTX *ctx_in, BIGNUM **kinvp,
 			}
 		while (BN_is_zero(k));
 
+		/* We do not want timing information to leak the length of k,
+		 * so we compute G*k using an equivalent scalar of fixed
+		 * bit-length. */
+
+		if (!BN_add(k, k, order)) goto err;
+		if (BN_num_bits(k) <= BN_num_bits(order))
+			if (!BN_add(k, k, order)) goto err;
+
 		/* compute r the x-coordinate of generator * k */
 		if (!EC_POINT_mul(group, tmp_point, k, NULL, NULL, ctx))
 		{

crypto/engine/engine.h

@@ -677,6 +677,7 @@ typedef struct st_dynamic_fns {
  * can be fully instantiated with IMPLEMENT_DYNAMIC_CHECK_FN(). */
 typedef unsigned long (*dynamic_v_check_fn)(unsigned long ossl_version);
 #define IMPLEMENT_DYNAMIC_CHECK_FN() \
+	OPENSSL_EXPORT unsigned long v_check(unsigned long v); \
 	OPENSSL_EXPORT unsigned long v_check(unsigned long v) { \
 		if(v >= OSSL_DYNAMIC_OLDEST) return OSSL_DYNAMIC_VERSION; \
 		return 0; }
@@ -699,6 +700,8 @@ typedef unsigned long (*dynamic_v_check_fn)(unsigned long ossl_version);
 typedef int (*dynamic_bind_engine)(ENGINE *e, const char *id,
 				const dynamic_fns *fns);
 #define IMPLEMENT_DYNAMIC_BIND_FN(fn) \
+	OPENSSL_EXPORT \
+	int bind_engine(ENGINE *e, const char *id, const dynamic_fns *fns); \
 	OPENSSL_EXPORT \
 	int bind_engine(ENGINE *e, const char *id, const dynamic_fns *fns) { \
 		if(ENGINE_get_static_state() == fns->static_state) goto skip_cbs; \

crypto/evp/evp_enc.c

@@ -204,6 +204,7 @@ skip_to_init:
 			case EVP_CIPH_OFB_MODE:
 
 			ctx->num = 0;
+			/* fall-through */
 
 			case EVP_CIPH_CBC_MODE:
 

crypto/evp/evp_test.c

@@ -435,6 +435,7 @@ int main(int argc,char **argv)
 	    EXIT(3);
 	    }
 	}
+	fclose(f);
 
 #ifndef OPENSSL_NO_ENGINE
     ENGINE_cleanup();

crypto/evp/m_sigver.c

@@ -137,7 +137,7 @@ int EVP_DigestSignFinal(EVP_MD_CTX *ctx, unsigned char *sigret, size_t *siglen)
 		sctx = 0;
 	if (sigret)
 		{
-		MS_STATIC EVP_MD_CTX tmp_ctx;
+		EVP_MD_CTX tmp_ctx;
 		unsigned char md[EVP_MAX_MD_SIZE];
 		unsigned int mdlen;
 		EVP_MD_CTX_init(&tmp_ctx);
@@ -173,7 +173,7 @@ int EVP_DigestSignFinal(EVP_MD_CTX *ctx, unsigned char *sigret, size_t *siglen)
 
 int EVP_DigestVerifyFinal(EVP_MD_CTX *ctx, unsigned char *sig, size_t siglen)
 	{
-	MS_STATIC EVP_MD_CTX tmp_ctx;
+	EVP_MD_CTX tmp_ctx;
 	unsigned char md[EVP_MAX_MD_SIZE];
 	int r;
 	unsigned int mdlen;

crypto/evp/p_lib.c

@@ -411,7 +411,10 @@ void EVP_PKEY_free(EVP_PKEY *x)
 static void EVP_PKEY_free_it(EVP_PKEY *x)
 	{
 	if (x->ameth && x->ameth->pkey_free)
+		{
 		x->ameth->pkey_free(x);
+		x->pkey.ptr = NULL;
+		}
 #ifndef OPENSSL_NO_ENGINE
 	if (x->engine)
 		{

crypto/evp/p_sign.c

@@ -81,7 +81,7 @@ int EVP_SignFinal(EVP_MD_CTX *ctx, unsigned char *sigret, unsigned int *siglen,
 	unsigned char m[EVP_MAX_MD_SIZE];
 	unsigned int m_len;
 	int i,ok=0,v;
-	MS_STATIC EVP_MD_CTX tmp_ctx;
+	EVP_MD_CTX tmp_ctx;
 
 	*siglen=0;
 	EVP_MD_CTX_init(&tmp_ctx);

crypto/evp/p_verify.c

@@ -68,7 +68,7 @@ int EVP_VerifyFinal(EVP_MD_CTX *ctx, const unsigned char *sigbuf,
 	unsigned char m[EVP_MAX_MD_SIZE];
 	unsigned int m_len;
 	int i,ok=0,v;
-	MS_STATIC EVP_MD_CTX tmp_ctx;
+	EVP_MD_CTX tmp_ctx;
 
 	EVP_MD_CTX_init(&tmp_ctx);
 	EVP_MD_CTX_copy_ex(&tmp_ctx,ctx);     

crypto/evp/pmeth_lib.c

@@ -134,6 +134,8 @@ static EVP_PKEY_CTX *int_ctx_new(EVP_PKEY *pkey, ENGINE *e, int id)
 		id = pkey->ameth->pkey_id;
 		}
 #ifndef OPENSSL_NO_ENGINE
+	if (pkey && pkey->engine)
+		e = pkey->engine;
 	/* Try to find an ENGINE which implements this method */
 	if (e)
 		{

crypto/hmac/hm_pmeth.c

@@ -147,6 +147,8 @@ static int int_update(EVP_MD_CTX *ctx,const void *data,size_t count)
 
 static int hmac_signctx_init(EVP_PKEY_CTX *ctx, EVP_MD_CTX *mctx)
 	{
+	HMAC_PKEY_CTX *hctx = ctx->data;
+	HMAC_CTX_set_flags(&hctx->ctx, mctx->flags & ~EVP_MD_CTX_FLAG_NO_INIT);
 	EVP_MD_CTX_set_flags(mctx, EVP_MD_CTX_FLAG_NO_INIT);
 	mctx->update = int_update;
 	return 1;

crypto/install-crypto.com

@@ -0,0 +1,196 @@
+$! INSTALL.COM -- Installs the files in a given directory tree
+$!
+$! Author: Richard Levitte <richard@levitte.org>
+$! Time of creation: 22-MAY-1998 10:13
+$!
+$! Changes by Zoltan Arpadffy <zoli@polarhome.com>
+$!
+$! P1  root of the directory tree
+$! P2  "64" for 64-bit pointers.
+$!
+$!
+$! Announce/identify.
+$!
+$ proc = f$environment( "procedure")
+$ write sys$output "@@@ "+ -
+   f$parse( proc, , , "name")+ f$parse( proc, , , "type")
+$!
+$ on error then goto tidy
+$ on control_c then goto tidy
+$!
+$ if (p1 .eqs. "")
+$ then
+$   write sys$output "First argument missing."
+$   write sys$output -
+     "It should be the directory where you want things installed."
+$     exit
+$ endif
+$!
+$ if (f$getsyi( "cpu") .lt. 128)
+$ then
+$   arch = "VAX"
+$ else
+$   arch = f$edit( f$getsyi( "arch_name"), "upcase")
+$   if (arch .eqs. "") then arch = "UNK"
+$ endif
+$!
+$ archd = arch
+$ lib32 = "32"
+$ shr = "_SHR32"
+$!
+$ if (p2 .nes. "")
+$ then
+$   if (p2 .eqs. "64")
+$   then
+$     archd = arch+ "_64"
+$     lib32 = ""
+$     shr = "_SHR"
+$   else
+$     if (p2 .nes. "32")
+$     then
+$       write sys$output "Second argument invalid."
+$       write sys$output "It should be "32", "64", or nothing."
+$       exit
+$     endif
+$   endif
+$ endif
+$!
+$ root = f$parse( p1, "[]A.;0", , , "syntax_only, no_conceal") - "A.;0"
+$ root_dev = f$parse( root, , , "device", "syntax_only")
+$ root_dir = f$parse( root, , , "directory", "syntax_only") - -
+   "[000000." - "][" - "[" - "]"
+$ root = root_dev + "[" + root_dir
+$!
+$ define /nolog wrk_sslroot 'root'.] /trans=conc
+$ define /nolog wrk_sslinclude wrk_sslroot:[include]
+$ define /nolog wrk_sslxlib wrk_sslroot:['arch'_lib]
+$!
+$ if f$parse("wrk_sslroot:[000000]") .eqs. "" then -
+   create /directory /log wrk_sslroot:[000000]
+$ if f$parse("wrk_sslinclude:") .eqs. "" then -
+   create /directory /log wrk_sslinclude:
+$ if f$parse("wrk_sslxlib:") .eqs. "" then -
+   create /directory /log wrk_sslxlib:
+$!
+$ sdirs := , -
+   'archd', -
+   objects, -
+   md2, md4, md5, sha, mdc2, hmac, ripemd, whrlpool, -
+   des, aes, rc2, rc4, rc5, idea, bf, cast, camellia, seed, -
+   bn, ec, rsa, dsa, ecdsa, dh, ecdh, dso, engine, -
+   buffer, bio, stack, lhash, rand, err, -
+   evp, asn1, pem, x509, x509v3, conf, txt_db, pkcs7, pkcs12, comp, ocsp, -
+   ui, krb5, -
+   store, cms, pqueue, ts, jpake
+$!
+$ exheader_ := crypto.h, opensslv.h, ebcdic.h, symhacks.h, ossl_typ.h
+$ exheader_'archd' := opensslconf.h
+$ exheader_objects := objects.h, obj_mac.h
+$ exheader_md2 := md2.h
+$ exheader_md4 := md4.h
+$ exheader_md5 := md5.h
+$ exheader_sha := sha.h
+$ exheader_mdc2 := mdc2.h
+$ exheader_hmac := hmac.h
+$ exheader_ripemd := ripemd.h
+$ exheader_whrlpool := whrlpool.h
+$ exheader_des := des.h, des_old.h
+$ exheader_aes := aes.h
+$ exheader_rc2 := rc2.h
+$ exheader_rc4 := rc4.h
+$ exheader_rc5 := rc5.h
+$ exheader_idea := idea.h
+$ exheader_bf := blowfish.h
+$ exheader_cast := cast.h
+$ exheader_camellia := camellia.h
+$ exheader_seed := seed.h
+$ exheader_modes := modes.h
+$ exheader_bn := bn.h
+$ exheader_ec := ec.h
+$ exheader_rsa := rsa.h
+$ exheader_dsa := dsa.h
+$ exheader_ecdsa := ecdsa.h
+$ exheader_dh := dh.h
+$ exheader_ecdh := ecdh.h
+$ exheader_dso := dso.h
+$ exheader_engine := engine.h
+$ exheader_buffer := buffer.h
+$ exheader_bio := bio.h
+$ exheader_stack := stack.h, safestack.h
+$ exheader_lhash := lhash.h
+$ exheader_rand := rand.h
+$ exheader_err := err.h
+$ exheader_evp := evp.h
+$ exheader_asn1 := asn1.h, asn1_mac.h, asn1t.h
+$ exheader_pem := pem.h, pem2.h
+$ exheader_x509 := x509.h, x509_vfy.h
+$ exheader_x509v3 := x509v3.h
+$ exheader_conf := conf.h, conf_api.h
+$ exheader_txt_db := txt_db.h
+$ exheader_pkcs7 := pkcs7.h
+$ exheader_pkcs12 := pkcs12.h
+$ exheader_comp := comp.h
+$ exheader_ocsp := ocsp.h
+$ exheader_ui := ui.h, ui_compat.h
+$ exheader_krb5 := krb5_asn.h
+$! exheader_store := store.h, str_compat.h
+$ exheader_store := store.h
+$ exheader_cms := cms.h
+$ exheader_pqueue := pqueue.h
+$ exheader_ts := ts.h
+$ exheader_jpake := jpake.h
+$ libs := ssl_libcrypto
+$!
+$ exe_dir := [-.'archd'.exe.crypto]
+$!
+$! Header files.
+$!
+$ i = 0
+$ loop_sdirs: 
+$   d = f$edit( f$element( i, ",", sdirs), "trim")
+$   i = i + 1
+$   if d .eqs. "," then goto loop_sdirs_end
+$   tmp = exheader_'d'
+$   if (d .nes. "") then d = "."+ d
+$   copy /protection = w:re ['d']'tmp' wrk_sslinclude: /log
+$ goto loop_sdirs
+$ loop_sdirs_end:
+$!
+$! Object libraries, shareable images.
+$!
+$ i = 0
+$ loop_lib: 
+$   e = f$edit( f$element( i, ",", libs), "trim")
+$   i = i + 1
+$   if e .eqs. "," then goto loop_lib_end
+$   set noon
+$   file = exe_dir+ e+ lib32+ ".olb"
+$   if f$search( file) .nes. ""
+$   then
+$     copy /protection = w:re 'file' wrk_sslxlib: /log
+$   endif
+$!
+$   file = exe_dir+ e+ shr+ ".exe"
+$   if f$search( file) .nes. ""
+$   then
+$     copy /protection = w:re 'file' wrk_sslxlib: /log
+$   endif
+$   set on
+$ goto loop_lib
+$ loop_lib_end:
+$!
+$ tidy:
+$!
+$ call deass wrk_sslroot
+$ call deass wrk_sslinclude
+$ call deass wrk_sslxlib
+$!
+$ exit
+$!
+$ deass: subroutine
+$ if (f$trnlnm( p1, "LNM$PROCESS") .nes. "")
+$ then
+$   deassign /process 'p1'
+$ endif
+$ endsubroutine
+$!

crypto/install.com

@@ -1,155 +0,0 @@
-$! INSTALL.COM -- Installs the files in a given directory tree
-$!
-$! Author: Richard Levitte <richard@levitte.org>
-$! Time of creation: 22-MAY-1998 10:13
-$!
-$! Changes by Zoltan Arpadffy <zoli@polarhome.com>
-$!
-$! P1	root of the directory tree
-$!
-$	IF P1 .EQS. ""
-$	THEN
-$	    WRITE SYS$OUTPUT "First argument missing."
-$	    WRITE SYS$OUTPUT -
-		  "It should be the directory where you want things installed."
-$	    EXIT
-$	ENDIF
-$
-$	IF (F$GETSYI("CPU").LT.128)
-$	THEN
-$	    ARCH := VAX
-$	ELSE
-$	    ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
-$	    IF (ARCH .EQS. "") THEN ARCH = "UNK"
-$	ENDIF
-$
-$	ROOT = F$PARSE(P1,"[]A.;0",,,"SYNTAX_ONLY,NO_CONCEAL") - "A.;0"
-$	ROOT_DEV = F$PARSE(ROOT,,,"DEVICE","SYNTAX_ONLY")
-$	ROOT_DIR = F$PARSE(ROOT,,,"DIRECTORY","SYNTAX_ONLY") -
-		   - "[000000." - "][" - "[" - "]"
-$	ROOT = ROOT_DEV + "[" + ROOT_DIR
-$
-$	DEFINE/NOLOG WRK_SSLROOT 'ROOT'.] /TRANS=CONC
-$	DEFINE/NOLOG WRK_SSLLIB WRK_SSLROOT:['ARCH'_LIB]
-$	DEFINE/NOLOG WRK_SSLINCLUDE WRK_SSLROOT:[INCLUDE]
-$
-$	IF F$PARSE("WRK_SSLROOT:[000000]") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLROOT:[000000]
-$	IF F$PARSE("WRK_SSLLIB:") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLLIB:
-$	IF F$PARSE("WRK_SSLINCLUDE:") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLINCLUDE:
-$
-$	SDIRS := ,-
-		 _'ARCH',-
-		 OBJECTS,-
-		 MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,WHRLPOOL,-
-		 DES,AES,RC2,RC4,RC5,IDEA,BF,CAST,CAMELLIA,SEED,-
-		 BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,-
-		 BUFFER,BIO,STACK,LHASH,RAND,ERR,-
-		 EVP,ASN1,PEM,X509,X509V3,CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,-
-		 UI,KRB5,-
-		 STORE,CMS,PQUEUE,TS,JPAKE
-$	EXHEADER_ := crypto.h,opensslv.h,ebcdic.h,symhacks.h,ossl_typ.h
-$	EXHEADER__'ARCH' := opensslconf.h
-$	EXHEADER_OBJECTS := objects.h,obj_mac.h
-$	EXHEADER_MD2 := md2.h
-$	EXHEADER_MD4 := md4.h
-$	EXHEADER_MD5 := md5.h
-$	EXHEADER_SHA := sha.h
-$	EXHEADER_MDC2 := mdc2.h
-$	EXHEADER_HMAC := hmac.h
-$	EXHEADER_RIPEMD := ripemd.h
-$	EXHEADER_WHRLPOOL := whrlpool.h
-$	EXHEADER_DES := des.h,des_old.h
-$	EXHEADER_AES := aes.h
-$	EXHEADER_RC2 := rc2.h
-$	EXHEADER_RC4 := rc4.h
-$	EXHEADER_RC5 := rc5.h
-$	EXHEADER_IDEA := idea.h
-$	EXHEADER_BF := blowfish.h
-$	EXHEADER_CAST := cast.h
-$	EXHEADER_CAMELLIA := camellia.h
-$	EXHEADER_SEED := seed.h
-$	EXHEADER_MODES := modes.h
-$	EXHEADER_BN := bn.h
-$	EXHEADER_EC := ec.h
-$	EXHEADER_RSA := rsa.h
-$	EXHEADER_DSA := dsa.h
-$	EXHEADER_ECDSA := ecdsa.h
-$	EXHEADER_DH := dh.h
-$	EXHEADER_ECDH := ecdh.h
-$	EXHEADER_DSO := dso.h
-$	EXHEADER_ENGINE := engine.h
-$	EXHEADER_BUFFER := buffer.h
-$	EXHEADER_BIO := bio.h
-$	EXHEADER_STACK := stack.h,safestack.h
-$	EXHEADER_LHASH := lhash.h
-$	EXHEADER_RAND := rand.h
-$	EXHEADER_ERR := err.h
-$	EXHEADER_EVP := evp.h
-$	EXHEADER_ASN1 := asn1.h,asn1_mac.h,asn1t.h
-$	EXHEADER_PEM := pem.h,pem2.h
-$	EXHEADER_X509 := x509.h,x509_vfy.h
-$	EXHEADER_X509V3 := x509v3.h
-$	EXHEADER_CONF := conf.h,conf_api.h
-$	EXHEADER_TXT_DB := txt_db.h
-$	EXHEADER_PKCS7 := pkcs7.h
-$	EXHEADER_PKCS12 := pkcs12.h
-$	EXHEADER_COMP := comp.h
-$	EXHEADER_OCSP := ocsp.h
-$	EXHEADER_UI := ui.h,ui_compat.h
-$	EXHEADER_KRB5 := krb5_asn.h
-$!	EXHEADER_STORE := store.h,str_compat.h
-$	EXHEADER_STORE := store.h
-$	EXHEADER_CMS := cms.h
-$	EXHEADER_PQUEUE := pqueue.h
-$	EXHEADER_TS := ts.h
-$	EXHEADER_JPAKE := jpake.h
-$	LIBS := LIBCRYPTO
-$
-$	EXE_DIR := [-.'ARCH'.EXE.CRYPTO]
-$
-$	I = 0
-$ LOOP_SDIRS: 
-$	D = F$EDIT(F$ELEMENT(I, ",", SDIRS),"TRIM")
-$	I = I + 1
-$	IF D .EQS. "," THEN GOTO LOOP_SDIRS_END
-$	tmp = EXHEADER_'D'
-$	IF D .EQS. ""
-$	THEN
-$	  COPY 'tmp' WRK_SSLINCLUDE: /LOG
-$	ELSE
-$	  IF D .EQS. "_''ARCH'"
-$	  THEN
-$	    COPY [-.'ARCH'.CRYPTO]'tmp' WRK_SSLINCLUDE: /LOG
-$	  ELSE
-$	    COPY [.'D']'tmp' WRK_SSLINCLUDE: /LOG
-$	  ENDIF
-$	ENDIF
-$	SET FILE/PROT=WORLD:RE WRK_SSLINCLUDE:'tmp'
-$	GOTO LOOP_SDIRS
-$ LOOP_SDIRS_END:
-$
-$	I = 0
-$ LOOP_LIB: 
-$	E = F$EDIT(F$ELEMENT(I, ",", LIBS),"TRIM")
-$	I = I + 1
-$	IF E .EQS. "," THEN GOTO LOOP_LIB_END
-$	SET NOON
-$	IF F$SEARCH(EXE_DIR+E+".OLB") .NES. ""
-$	THEN
-$	  COPY 'EXE_DIR''E'.OLB WRK_SSLLIB:'E'.OLB/log
-$	  SET FILE/PROT=W:RE WRK_SSLLIB:'E'.OLB
-$	ENDIF
-$	! Preparing for the time when we have shareable images
-$	IF F$SEARCH(EXE_DIR+E+".EXE") .NES. ""
-$	THEN
-$	  COPY 'EXE_DIR''E'.EXE WRK_SSLLIB:'E'.EXE/log
-$	  SET FILE/PROT=W:RE WRK_SSLLIB:'E'.EXE
-$	ENDIF
-$	SET ON
-$	GOTO LOOP_LIB
-$ LOOP_LIB_END:
-$
-$	EXIT

crypto/jpake/jpake.c

@@ -282,8 +282,37 @@ int JPAKE_STEP1_generate(JPAKE_STEP1 *send, JPAKE_CTX *ctx)
     return 1;
     }
 
+/* g^x is a legal value */
+static int is_legal(const BIGNUM *gx, const JPAKE_CTX *ctx)
+    {
+    BIGNUM *t;
+    int res;
+    
+    if(BN_is_negative(gx) || BN_is_zero(gx) || BN_cmp(gx, ctx->p.p) >= 0)
+	return 0;
+
+    t = BN_new();
+    BN_mod_exp(t, gx, ctx->p.q, ctx->p.p, ctx->ctx);
+    res = BN_is_one(t);
+    BN_free(t);
+
+    return res;
+    }
+
 int JPAKE_STEP1_process(JPAKE_CTX *ctx, const JPAKE_STEP1 *received)
     {
+    if(!is_legal(received->p1.gx, ctx))
+	{
+	JPAKEerr(JPAKE_F_JPAKE_STEP1_PROCESS, JPAKE_R_G_TO_THE_X3_IS_NOT_LEGAL);
+	return 0;
+	}
+
+    if(!is_legal(received->p2.gx, ctx))
+	{
+	JPAKEerr(JPAKE_F_JPAKE_STEP1_PROCESS, JPAKE_R_G_TO_THE_X4_IS_NOT_LEGAL);
+	return 0;
+	}
+
    /* verify their ZKP(xc) */
     if(!verify_zkp(&received->p1, ctx->p.g, ctx))
 	{

crypto/jpake/jpake.h

@@ -115,6 +115,8 @@ void ERR_load_JPAKE_strings(void);
 #define JPAKE_F_VERIFY_ZKP				 100
 
 /* Reason codes. */
+#define JPAKE_R_G_TO_THE_X3_IS_NOT_LEGAL		 108
+#define JPAKE_R_G_TO_THE_X4_IS_NOT_LEGAL		 109
 #define JPAKE_R_G_TO_THE_X4_IS_ONE			 105
 #define JPAKE_R_HASH_OF_HASH_OF_KEY_MISMATCH		 106
 #define JPAKE_R_HASH_OF_KEY_MISMATCH			 107

crypto/jpake/jpake_err.c

@@ -1,6 +1,6 @@
 /* crypto/jpake/jpake_err.c */
 /* ====================================================================
- * Copyright (c) 1999-2008 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1999-2010 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -80,6 +80,8 @@ static ERR_STRING_DATA JPAKE_str_functs[]=
 
 static ERR_STRING_DATA JPAKE_str_reasons[]=
 	{
+{ERR_REASON(JPAKE_R_G_TO_THE_X3_IS_NOT_LEGAL),"g to the x3 is not legal"},
+{ERR_REASON(JPAKE_R_G_TO_THE_X4_IS_NOT_LEGAL),"g to the x4 is not legal"},
 {ERR_REASON(JPAKE_R_G_TO_THE_X4_IS_ONE)  ,"g to the x4 is one"},
 {ERR_REASON(JPAKE_R_HASH_OF_HASH_OF_KEY_MISMATCH),"hash of hash of key mismatch"},
 {ERR_REASON(JPAKE_R_HASH_OF_KEY_MISMATCH),"hash of key mismatch"},

crypto/md32_common.h

@@ -165,7 +165,7 @@
 				asm (			\
 				"roll %1,%0"		\
 				: "=r"(ret)		\
-				: "I"(n), "0"(a)	\
+				: "I"(n), "0"((unsigned int)(a))	\
 				: "cc");		\
 			   ret;				\
 			})
@@ -383,6 +383,7 @@ int HASH_FINAL (unsigned char *md, HASH_CTX *c)
 	}
 
 #ifndef MD32_REG_T
+#if defined(__alpha) || defined(__sparcv9) || defined(__mips)
 #define MD32_REG_T long
 /*
  * This comment was originaly written for MD5, which is why it
@@ -400,9 +401,15 @@ int HASH_FINAL (unsigned char *md, HASH_CTX *c)
  * Well, to be honest it should say that this *prevents* 
  * performance degradation.
  *				<appro@fy.chalmers.se>
- * Apparently there're LP64 compilers that generate better
- * code if A-D are declared int. Most notably GCC-x86_64
- * generates better code.
+ */
+#else
+/*
+ * Above is not absolute and there are LP64 compilers that
+ * generate better code if MD32_REG_T is defined int. The above
+ * pre-processor condition reflects the circumstances under which
+ * the conclusion was made and is subject to further extension.
  *				<appro@fy.chalmers.se>
  */
+#define MD32_REG_T int
+#endif
 #endif

crypto/o_time.c

@@ -64,12 +64,18 @@
 #include "o_time.h"
 
 #ifdef OPENSSL_SYS_VMS
-# include <libdtdef.h>
-# include <lib$routines.h>
-# include <lnmdef.h>
-# include <starlet.h>
-# include <descrip.h>
-# include <stdlib.h>
+# if __CRTL_VER >= 70000000 && \
+     (defined _POSIX_C_SOURCE || !defined _ANSI_C_SOURCE)
+#  define VMS_GMTIME_OK
+# endif
+# ifndef VMS_GMTIME_OK
+#  include <libdtdef.h>
+#  include <lib$routines.h>
+#  include <lnmdef.h>
+#  include <starlet.h>
+#  include <descrip.h>
+#  include <stdlib.h>
+# endif /* ndef VMS_GMTIME_OK */
 #endif
 
 struct tm *OPENSSL_gmtime(const time_t *timer, struct tm *result)
@@ -81,7 +87,7 @@ struct tm *OPENSSL_gmtime(const time_t *timer, struct tm *result)
 	   so we don't even look at the return value */
 	gmtime_r(timer,result);
 	ts = result;
-#elif !defined(OPENSSL_SYS_VMS)
+#elif !defined(OPENSSL_SYS_VMS) || defined(VMS_GMTIME_OK)
 	ts = gmtime(timer);
 	if (ts == NULL)
 		return NULL;
@@ -89,7 +95,7 @@ struct tm *OPENSSL_gmtime(const time_t *timer, struct tm *result)
 	memcpy(result, ts, sizeof(struct tm));
 	ts = result;
 #endif
-#ifdef OPENSSL_SYS_VMS
+#if defined( OPENSSL_SYS_VMS) && !defined( VMS_GMTIME_OK)
 	if (ts == NULL)
 		{
 		static $DESCRIPTOR(tabnam,"LNM$DCL_LOGICAL");

crypto/ocsp/ocsp_ht.c

@@ -397,11 +397,12 @@ int OCSP_sendreq_nbio(OCSP_RESPONSE **presp, OCSP_REQ_CTX *rctx)
 
 
 		case OHS_ASN1_HEADER:
-		/* Now reading ASN1 header: can read at least 6 bytes which
-		 * is more than enough for any valid ASN1 SEQUENCE header
+		/* Now reading ASN1 header: can read at least 2 bytes which
+		 * is enough for ASN1 SEQUENCE header and either length field
+		 * or at least the length of the length field.
 		 */
 		n = BIO_get_mem_data(rctx->mem, &p);
-		if (n < 6)
+		if (n < 2)
 			goto next_io;
 
 		/* Check it is an ASN1 SEQUENCE */
@@ -414,6 +415,11 @@ int OCSP_sendreq_nbio(OCSP_RESPONSE **presp, OCSP_REQ_CTX *rctx)
 		/* Check out length field */
 		if (*p & 0x80)
 			{
+			/* If MSB set on initial length octet we can now
+			 * always read 6 octets: make sure we have them.
+			 */
+			if (n < 6)
+				goto next_io;
 			n = *p & 0x7F;
 			/* Not NDEF or excessive length */
 			if (!n || (n > 4))

crypto/ocsp/ocsp_lib.c

@@ -170,14 +170,14 @@ int OCSP_parse_url(char *url, char **phost, char **pport, char **ppath, int *pss
 
 	char *host, *port;
 
-	/* dup the buffer since we are going to mess with it */
-	buf = BUF_strdup(url);
-	if (!buf) goto mem_err;
-
 	*phost = NULL;
 	*pport = NULL;
 	*ppath = NULL;
 
+	/* dup the buffer since we are going to mess with it */
+	buf = BUF_strdup(url);
+	if (!buf) goto mem_err;
+
 	/* Check for initial colon */
 	p = strchr(buf, ':');
 

crypto/opensslv.h

@@ -25,11 +25,11 @@
  * (Prior to 0.9.5a beta1, a different scheme was used: MMNNFFRBB for
  *  major minor fix final patch/beta)
  */
-#define OPENSSL_VERSION_NUMBER	0x10000020
+#define OPENSSL_VERSION_NUMBER	0x1000006fL
 #ifdef OPENSSL_FIPS
-#define OPENSSL_VERSION_TEXT	"OpenSSL 1.0.0b-fips-dev xx XXX xxxx"
+#define OPENSSL_VERSION_TEXT	"OpenSSL 1.0.0f-fips 4 Jan 2012"
 #else
-#define OPENSSL_VERSION_TEXT	"OpenSSL 1.0.0b-dev x XXX xxxx"
+#define OPENSSL_VERSION_TEXT	"OpenSSL 1.0.0f 4 Jan 2012"
 #endif
 #define OPENSSL_VERSION_PTEXT	" part of " OPENSSL_VERSION_TEXT